Professional Documents
Culture Documents
Airmotor Catalog
Airmotor Catalog
Air Motors/Gearmotors
Known industry wide for their rugged construction and reliability, Gast Air
Motors and air powered Gearmotors are used in a variety of applications.
Lubricated Air Motors come in seven basic models up to 9.5 HP (7,1 kW);
motor speeds are variable from 300 to 10,000 RPM. Oilless versions, which require
absolutely no lubrication, come in three basic models ranging from .18 to 2.5 HP
(0,13 to 1,86 kW) and with motor speeds up to 4,000 RPM. Choose from hub, foot,
face, NEMA C-Flange or Metric D Series interface mountings and clockwise,
counterclockwise or reversible rotations. Four and eight vane models are also
available.
Air powered Gearmotors are available in rightangle and in-line models
offering a maximum torque range of 73 to 5,200 lb. in. (8 to 587 Nm) and gear
ratios from 10:1 to 60:1 single reduction gear reducers. A full line of recommended
accessories is also available.
Nonelectrical sparking.
As a nonelectrical device, the possibility of
explosion from igniting flammable gases is
greatly reduced.
Instantly reversible.
A four-way valve in the air line enables
a Gast Air Motor to be instantly reversed. A
turn of the valve causes a complete
reversal of rotation, even when the motor is
running at full speed.
Cool running.
As the air motor turns, expanded air cools
the motor. Units can be used in ambient
temperatures up to 250F (120C) in an
nonhazardous atmosphere.
Minimum maintenance.
You can put a Gast Air Motor in places where
they will not get much service, because theres
virtually nothing to service on a Gast Air Motor,
providing it is operated on a clean, dry, and lubricated air supply*.
Low price.
Cost is less than other motors of equal horsepower and capabilities.
Low-shock starts.
Because Gast Air Motors go to work
with air-cushioned smoothness, they
cut stress on your equipment.
Mounting flexibility.
Foot, hub, face, NEMA-C or metric flange
motor mountings are standard equipment for
most air motor sizes.
Four-vane or eight-vane.
Four-vane units meet most requirements,
but for more precise inching control and
minimum blowby in applications where motor is operating in a stalled condition,
specify eight-vane models.
Long-life accessories.
To ensure long life, Gast offers accessories
designed to extend unit life including air filters that remove water and particles down
to 5 microns, and air line lubricators that
supply a constant flow of lubrication automatically*. We can supply a pressure regulator that provides precise control of power
and operating speed. Options like these
help you get smooth performance with
minimum maintenance.
*Non-lubricated series does not require a
lubricator
Self-sealing vanes.
Vanes are self-sealing and automatically take
up their own wear, thus ensuring constant output for thousands of hours of use.
GAST MFG INC PO BOX 97 BENTON HARBOR, MI 49023-0097 PH 269/926-6171 FAX 269/925-8288 www.gastmfg.com
Registered Trademark/Trademark of Gast Manufacturing Inc. Copyright Gast Manufacturing Inc. All rights reserved.
Typical Applications
Mixing Equipment
Conveyor Drives
Pump Drives
Food Packaging
Pharmaceutical Packaging
Hoists and Winches
Hose Reels
Fiberglass Choppers
Tension Devices
Turntables
Torque vs Speed.
1. An air motor slows down when load increases
at the same time its torque increases to a point where
it matches the load. It will continue to provide increased
torque all the way to the stalled condition, and it can
maintain the stalled condition without any harm to the motor.
2. As the load is reduced, an air motor will increase speed
and the torque will decrease to match the reduced load.
3. When the load on an air motor is either increased or
decreased, speed can be controlled by increasing or
decreasing air pressure.
4. Starting torque of an air motor is lower than running
torque. While this provides smooth, low-shock starting,
it is necessary to have additional air line pressure for
starting under heavy loads.
Get the right air motor with all the right options.
Whatever your rotary air motor power requirements, chances are we have what youre looking for.
Performance Overview
AIR MOTORS
OPERATING DATA
MAX.
SPEED
MAX OUTPUT
POWER
TORQUE AT
MAX OUTPUT
MAX. AIR
CONSUMPTION
MAX.
SPEED
MAX
TORQUE
MODEL
rpm
hp
kW
lb. in.
Nm
cfm
m3/h
rpm
lb. in.
Nm
Page No.
1AM (A)
10,000
0.45
0,33
2.75
0,31
20.5
35,1
650
5.60
0,65
1UP (B)
6,000
0.45
0,33
5.25
0,58
27
47
500
6.00
0,68
2AM (A)
3,000
0.93
0,68
19.50
2,20
30
49,5
350
26.10
3,05
6-7
4AM (A)
3,000
1.70
1,30
36.00
4,1
78
132,5
300
56.00
6,3
8-9
6AM (A)
3,000
4.00
3,00
84.00
10,00
128
228
300
115.00
13,00
10-11
8AM (A)
2,500
5.25
3,90
132.00
14,40
175
293
300
185.00
21,00
12-13
16AM (A)
2,000
9.50
7,00
290.00
34,00
275
475
300
372.00
43,00
14
*NL22(B)
4,000
.18
0,13
2.80
0,32
18.5
31
1000
4.30
0,49
16
*NL32(B)
2,000
.42
0,31
13.50
1,5
30
51
300
21.00
2,5
17
*NL42(B)
2,000
.82
0,61
25.50
2,90
41
70
500
44.00
5,0
18
*NL52(B)
2,000
2.50
1.86
78.75
8,90
68
115
500
100.00
11,3
19
*Oilless models
GEARMOTORS
OPERATING DATA
MODEL
GEAR
RATIO
1AM-NRV
MAX.
SPEED
rpm
LINE
PRES.
15:1
350
1UP-NRV
15:1
4AM-RV
MAX OUTPUT
POWER
TORQUE AT
MAX OUTPUT
MAX
TORQUE
hp
kW
lb. in.
Nm
cfm
m3/h
rpm
lb. in.
Nm
Page No.
0.34
0,26
62
7,1
21.0
36
30
72
8,1
21
400
0.32
0,23
49
5,5
21.0
36
30
71
8,0
21
10:1
300
1.26
0,94
274
31,0
57.5
98
30
425
48,0
22
4AM-RV
15:1
200
1.25
0,90
400
45,2
60.0
102
20
640
72,0
22
4AM-70C
20:1
150
1.17
0,87
487
55,0
71.0
120
15
740
83,6
23
4AM-70C
40:1
75
0.95
0,71
800
90,4
71.0
120
1255
141,8
24
4AM-70C
60:1
50
0.82
0,61
1040
117,5
71.0
120
1640
185,3
25
6AM-22A
10:1
300
3.40
2,54
720
81,4
130.0
221
30
950
107,4
26
6AM-22A
20:1
150
2.65
1,98
1100
124,3
130.0
221
15
1550
175,6
27
6AM-22A
40:1
75
2.10
1,57
1725
194,9
135.0
230
2500
282,5
28
8AM-32A
20:1
125
3.70
2,76
1850
209,1
177.0
301
15
2550
288,2
29
16AM-13
20:1
100
6.50
4,85
4175
471,8
275.0
468
15
5175
584,8
30
A 100 psig and 7,0 bar line pressure for imperial and metric data, respectively.
B 80 psig and 5,5 bar line pressure for imperial and metric data, respectively.
C 60 psig and 4,1 bar line pressure for imperial and metric data, respectively.
MAX. AIR
MAX.
CONSUMPTION SPEED
Air Motors up to / hp, speeds from 500 to 10,000 rpm, max. pressure 100 psi (7 bar)
1
MODEL
1AM-NCC-12
.5
0,4
100 psi
.4
(4 Vanes, CW Rotation)
1AM-NRV-39A
.1
1AM-NRV-63A
40 psi
II, 2 GD c T4
100 psi
80 psi
60 psi
40 psi
20 psi
3
2
1
2.50
64,0
1.14
29,0
0,6
4.25
108,0
7,0 bar
5,6 bar
0,4
0,3
4,2 bar
2,8 bar
1,4 bar
0,2
0,1
0
0.375
DIA.
9,53
2x 45
2x 0.25
6,4
10
20
100 psi
15
80 psi
60 psi
10
40 psi
5
20 psi
0
25
36
7,0 bar
8
5,6 bar
12
2,8 bar
24
18
4,2 bar
30
1,4 bar
0
0
2000 4000 6000 8000 10000
SPEED RPM (OUTPUT)
1.05
26,7
2.22 1.250
56,4 31,75
0,5
0.54
13,7
2.44
62,0
1.75
44,5
0,7
6
TORQUE (Nm)
inches / mm
Hub mounting
Any plane operation
Muffler AF350
Filter AH100F
Regulator AH101R
Gauge AA806
Lubricator AH102L
Oil AD220
1 quart (.94 liters)
Repair kit K200
(Single Rotation)
Repair kit K201
(Reversible)
Repair kit K278
(8 Vane, Reversible)
FEATURES
2,8 bar
0,1
1,4 bar
RECOMMENDED
4,2 bar
20 psi
(8 Vanes, Reversible)
5,6 bar
0,2
60 psi
.2
(4 Vanes, Reversible)
7,0 bar
0,3
80 psi
.3
KILOWATT
HORSEPOWER
1AM-NCW-14
OPTIONAL
Foot mountingsee page 34
Output Power vs. Speed
1UP-NCC-1A
.5
0,4
1UP-NCW-2A
(4 Vanes, CW Rotation)
1UP-NRV-3A
0,3
80 psi
.3
60 psi
.2
40 psi
.1
1UP-NRV-10
5,6 bar
0,2
4,2 bar
2,8 bar
0,1
20 psi
(4 Vanes, Reversible)
0
KILOWATT
HORSEPOWER
.4
1,4 bar
0
(8 Vanes, Reversible)
Hub mounting
Any plane operation
Muffler AF350
4.66
118,4
II, 2 GD c T4
Filter AH100F
Regulator AH101R
Gauge AA807
Lubricator AH102L
Oil AD220
1 quart (.94 liters)
Repair kit K285
(Single Rotation)
Repair kit K286 (Reversible)
Repair kit K298
(8 Vane, Reversible)
OPTIONAL
Foot mounting-see page 34
1.05
26,7
2.22 1.250
56,4 31,75
60 psi
40 psi
2
20 psi
0.54
13,7
4,2 bar
0,4
0,3
2,8 bar
0,2
1,4 bar
0,1
0
0.375 DIA.
9,53
5,6 bar
0,5
0.33
8,4 FLAT2x 45
2x 0.25
6,4
30
15,0
25
80 psi
20
60 psi
15
40 psi
10
20 psi
5
0
12,5
10,0
7,5
5,0
2,5
0
54
48
5,6 bar 42
36
30
4,2 bar
24
2,8 bar
18
12
1,4 bar
6
0
1000 2000 3000 4000 5000 6000
SPEED RPM (OUTPUT)
2.72
69,1
1.14
29,0
0.81
20,6
0,6
80 psi
RECOMMENDED
2.44
62,0
1.75
44,5
inches / mm
0,7
TORQUE (Nm)
6
TORQUE LB. IN.
FEATURES
Air Motors up to / hp, speeds from 300 to 3,000 rpm, max. pressure 100 psi (7 bar)
3
MODEL
2AM-FCC-1
(4 Vanes, CCW Rotation)
2AM-FCW-13
(4 Vanes, CW Rotation)
Net wt. 7 lbs. (3,2 kg)
inches / mm
FEATURES
Foot mounting
Any plane operation
Metal muffler AC980 adds 2" height
when installed
1/4 PIPE
2.81
71,4
1/4 PIPE
4.94
125,5
1.00
25,4
5.28
134,1
II 2 GD c T4
RECOMMENDED
4.13
104,9 2.75
69,8
3.50
88,9
0.38
9,7
Filter AH103F
Regulator AH104R
Gauge AA806
Lubricator AH105L
Oil AD220 1 quart (.94 litres)
Repair kit K202 (Single Rotation)
3.75
95,3
3.00
76,2
0.45 0.50
11,4 12,7 DIA.
0.94
23,9
1.50
38,1
2AM-NCC-16
(4 Vanes, CCW Rotation)
2AM-NCW-7B
(4 Vanes, CW Rotation)
2AM-NRV-89
inches / mm
(4 Vanes, Reversible)
Net wt. 6 lbs. (2,7 kg)
FEATURES
Hub mounting
Any plane operation
Metal muffler AC980 adds 2" height
when installed
II 2 GD c T4
1/4 PIPE
2.50
63,5
2.81
71,4
1.25
31,8
1.00
25,4
1.78
45,2
1.13
28,7
1.750
DIA.
44,45
4.06
103,1
0.500 DIA.
12,7
0.45
11,4
RECOMMENDED
4.94
125,5
Filter AH103F
Regulator AH104R
Gauge AA806
Lubricator AH105L
Oil AD220 1 quart (.94 litres)
Repair kit K202 (Single Rotation)
Repair kit K509 (Reversible)
2AM-NCC-43A
(4 Vanes, CCW Rotation)
inches / mm
2AM-NRV-90
(4 Vanes, Reversible)
5.87
149,1
1.63
2.06
1/4 PIPE EXHAUST
41,4
52,3
0.38 -16 THD.
1.25
0.12
9,65 (4HLS.)
31,8
3,0
1.41
0.19 SQ. KEY
35,8
4,83
FEATURES
NEMA 56C mounting
Any plane operation
Metal muffler AC980 adds 2" height
when installed
4.50
114,3 DIA.
II 2 GD c T4
5.88
149,4
RECOMMENDED
Filter AH103F
Regulator AH104R
Gauge AA806
Lubricator AH105L
Oil AD220 1 quart (.94 litres)
Repair kit K203A (Single Rotation) Repair kit K510 (Reversible)
45
6.50
165,1
0.625 DIA.
15,88
0.704
17,88
0.63
16,0
Metric Models
Models 2AM-ACC-88/2AM-ARV-92
inches / mm
2.50
63,5
1.25
31,8
MODEL
2AM-ACC-88
1/4 BSP
1/4 BSP
5.00
127,0
2.81
71,4
0.14
3,6
5 mm KEY
4.33
110,0
1.78
45,2
2AM-ACC-91
(4 Vanes, CCW Rotation)
Face Mount
0.16
4,1
6.30
160,0
0.59
M5 X 15,0
DEEP
2AM-ARV-92
45 TYP
(4 Vanes, Reversible)
Flange Mount
0.5512
14,0
2AM-ARV-93
Models 2AM-ACC-91/2AM-ARV-93
(4 Vanes, Reversible)
Face Mount
FEATURES
IEC #72 mounting frame size:
D71 (2AM-ACC-88, 2AM-ARV-92)
D71C (2AM-ACC-91, 2AM-ARV-93)
Any plane operation
Metal muffler AC980 adds 2" height
when installed
1.18
30,0
1/4 BSP
2.50
63,5
1.25
31,8
1.18
30,0
1/4 BSP
2.81
71,4
5.00
127,0
0.10
2,5
5 mm KEY
1.78
45,2
4.13
104,9
0.59
M5 X 15,0 DEEP
II 2 GD c T4
45TYP
0.43
3.346
M6 TAP X 11,0 DEEP (4) ON 85,0 B.C.
RECOMMENDED
2.7578
2.7542
70,048
69,957
0.5515
0.5511
14,008
13,998
0,7
0,6
100 psi
0.6
80 psi
60 psi
0.4
0,3
4,2 bar
0,2
2,8 bar
0,1
20 psi
0
5,6 bar
0,4
40 psi
0.2
7,0 bar
0,5
KILOWATT
HORSEPOWER
0.8
1,4 bar
0
3,5
25
3,0
100 psi
20
80 psi
15
60 psi
10
5,6 bar
1,5
4,2 bar
2,8 bar
0,5
20 psi
0
7,0 bar
2,0
1,0
40 psi
2,5
TORQUE (Nm)
1,4 bar
0
25
20
80 psi
15
60 psi
10
40 psi
5
0
20 psi
0
15,0
100 psi
12,5
10,0
7,5
5,0
2,5
0
54
48
42
7,0 bar
36
5,6 bar
30
24
4,2 bar
18
2,8 bar
12
1,4 bar
6
0
500 1000 1500 2000 2500 3000
SPEED RPM (OUTPUT)
Air Motors
up to 11/2 hp, speeds from 300 to 3,000 rpm, max. pressure 100 psi (7 bar)
MODEL
4AM-FRV-24
(4 Vanes, Dual Shaft)
4AM-FRV-13C
(4 Vanes, Reversible)
4AM-FRV-63A
(8 Vanes, Reversible)
inches / mm
FEATURES
Foot mounting
Any plane operation
Single or dual shaft
Metal muffler AC980 adds 2" height
when installed.
Filter AH103F
Regulator AH104R
Gauge AA806
Lubricator AH105L
Oil AD220 1 quart (.94 litres)
Repair kit K205 (4 Vane, Reversible)
Repair kit K279 (8 Vane, Reversible)
3.25
82,6
5.81
147,6
1.12
28,4
5.32
135,1
5.04
128,0
II 2 GD c T4
RECOMMENDED
1.25
31,8
1/4 PIPE
3.50
88,9
1.50 1.50
38,1 38,1
3.75
95,3
0.50 DIA.
12,7
2.78
70,6
0.38
9,7
1.50
38,1
0.94
23,9
4AM-NRV-22B
(4 Vanes, Reversible)
inches / mm
4AM-NRV-54A
(8 Vanes, Reversible)
Net wt. 9 lbs. (4,1 kg)
1/4 PIPE
FEATURES
Face mounting
Any plane operation
Metal muffler AC980 adds 2" height
when installed.
1.25
31,8
0.63
16,0
15 1.750 DIA.
44,45
3.94
100,1 0.16
4,1
II 2 GD c T4
1.12
28,4
0.50
12,7
5.81
147,6
#3 WKW
1.72
43,7
1.25 R
31,8
RECOMMENDED
2.50
63,5
3.25
82,6
Filter AH103F
Regulator AH104R
Gauge AA806
Lubricator AH105L
Oil AD220 1 quart (.94 litres)
Repair kit K205 (4 Vane, Reversible)
Repair kit K279 (8 Vane, Reversible)
0.500 DIA.
12,7
0.555
14,1
4AM-NRV-50C
(4 Vanes, Reversible)
inches / mm
4AM-NRV-70C
1/4 PIPE INLET
1/4 PIPE EXHAUST
(8 Vanes, Reversible)
1.25
31,8
FEATURES
NEMA 56C mounting
Any plane operation
Metal muffler AC980 adds 2" height
when installed
II, 2 GD c T4
RECOMMENDED
8
Filter AH103F
Regulator AH104R
Gauge AA806
2.06
52,3
4.50
114,3 DIA.
5.88
149,4
45
6.50
165,1
0.625 DIA.
15,88
0.704
17,88
2.06
52,3
0.13
3,3
6.69
169,9
Metric Models
MODEL
inches / mm
4AM-ARV-119
2.50
63,5
1.25
31,8
(4 Vanes, Reversible)
3/8 BSP
4AM-ARV-120
1.18
30,0
3/8 BSP
0.14
3,6
5 mm KEY
(8 Vanes, Reversible)
4.33
110,0
1.78
45,2
FEATURES
IEC #72 mounting frame size D71
Any plane operation
Metal muffler AC980 adds 2" height
when installed. (Includes 3/8 BSP
adaptor with air motor).
0.16
4,1
6.30
160,0
0.59
M5 X 15,0
DEEP
45 TYP
II 2 GD c T4
5.88
149,4
3.25
82,6
0.5512
14,0
RECOMMENDED
Repair kit K206C (4AM-ARV-119)
Repair kit K208B (4AM-ARV-120)
80 psi
1,0
60 psi
7,0 bar
1,2
5,6 bar
KILOWATT
100 psi
0,8
4,2 bar
0,6
20 psi
0
2,8 bar
0,4
1,4 bar
0,2
0
60
50
100 psi
80 psi
60 psi
40 psi
40
30
20
10
0
5,6 bar
4,2 bar
2,8 bar
2
1
20 psi
0
7,0 bar
1,4 bar
0
70
100 psi
60
50
80 psi
40
60 psi
30
40 psi
20
20 psi
10
0
144
35
30
25
5,6 bar
20
4,2 bar
15
2,8 bar
10
1,4 bar
5
0
96
72
48
24
80
40 psi
70
TORQUE (Nm)
1,4
HORSEPOWER
Air Motors up to 4 hp, speeds from 300 to 3,000 rpm, max. pressure 100 psi (7 bar)
MODEL
inches / mm
FEATURES
Foot mounting
Any plane operation
Metal muffler AC990 adds 2" height
when installed
II 2 GD c T4
RECOMMENDED
1.39
35,3
0.19
SQ. KEY
4,83
7.47
189,7
4.38
111,3
3.50
88,9
Filter AH106F
Regulator AH107R
Gauge AA806
Lubricator AH108L
Oil AD220 1 quart (.94 litres)
Repair kit K208 (4 Vane)
Repair kit K281 (8 Vane)
0.625
15,88 DIA.
0.704
17,88
4.25
5.00 108,0
127,0
1.74
44,2
2.38
60,5
0.34
8,6 DIA. (4) HLS.
FEATURES
Face mounting
Any plane operation
Muffler AC990 adds 2" height
when installed
inches / mm
1/2 NPT PIPE
2.75
69,9
II 2 GD c T4
1.94
49,3
1.39
35,3
0.19
4,83 SQ. KEY
RECOMMENDED
2.44
62,0
8.29
210,6
2.31
58,7
Filter AH106F
Regulator AH107R
Gauge AA806
Lubricator AH108L
Oil AD220 1 quart (.94 litres)
Repair kit K208
2.25 DIA.
57,2
30
5.00
127,0
0.31 -18 THD. 0.44 DP (3)
7,87
11,1
2.00
50,8 R
0.625 DIA.
15,88
0.704
17,88
FEATURES
NEMA 56C mounting
Any plane operation
Muffler AC990 adds 2" height
when installed
inches / mm
II 2 GD c T4
1/2 NPT PIPE
2.75
69,9
RECOMMENDED
Filter AH106F
Regulator AH107R
Gauge AA806
Lubricator AH108L
Oil AD220 1 quart (.94 litres)
Repair kit K208 (4 Vane)
Repair kit K281 (8 Vane)
5.88
149,4
45
6.50
165,1
10
2.06
52,3
0.625 DIA.
15,88
0.704
17,88
3.13
79,5
0.13
3,3
8.29
210,6
Metric Models
inches / mm
MODEL
6AM-ARV-54
1/2 BSP
2.75
69,9
1.38
35,1
1.57
39,8
1/2 BSP
(4 Vanes, Reversible)
Repair kit K281A
7.50
190,5
4.41
112,0
0.14
3,6
6 mm KEY
5.12
130,0
2.44
61,9
6AM-ARV-55
(8 Vanes, Reversible)
Repair kit K281B
0.19
4,8 ECC.
FEATURES
7.87
199,9
0.59
M6 X 15,0
DEEP
45 TYP
0.7480
19,0
II 2 GD c T4
3,0
120
7,0 bar
40 psi
1
0
4,2 bar
1,5
20 psi
0
2,8 bar
1,0
0,5
0
1,4 bar
0
100 psi
80
80 psi
60
60 psi
40 psi
40
20 psi
20
0
7,0 bar
10
5,6 bar
4,2 bar
2,8 bar
1,4 bar
100
80 psi
80
60
60 psi
40
40 psi
20 psi
20
0
60
50
40
30
20
10
0
240
216
7,0 bar 192
5,6 bar 168
144
120
4,2 bar
96
2,8 bar
72
48
1,4 bar
24
0
500 1000 1500 2000 2500 3000
SPEED RPM (OUTPUT)
140
FREE AIR CONSUMPTION (l/s)
60 psi
KILOWATT
2,0
12
100
5,6 bar
HORSEPOWER
2,5
80 psi
14
TORQUE (Nm)
11
Air Motors up to 5 hp, speeds from 300 to 2,500 rpm, max. pressure 100 psi (7 bar)
MODEL
FEATURES
inches / mm
Foot mounting
Any plane operation
Metal muffler AC990 adds 2" height
when installed
1.53
38,9
II 2 GD c T4
8.41
113,6
4.91
124,7
1.34
34,0
RECOMMENDED
Filter AH106F
Regulator AH107R
Gauge AA806
Lubricator AH108L
Muffler AG600 above 1,000 rpm
Oil AD220 1 quart (.94 litres)
Repair kit K210 (4 Vane)
Repair kit K283 (8 Vane)
3.50
88,9
0.38
9,7
0.750 DIA.
19,05
3.91
99,3
0.34 DIA. (4) HLS.
8,6
4.50
5.50 114,3
139,7
2.00
50,8
FEATURES
Face mounting
Any plane operation
Metal muffler AC990 adds 2"
height when installed
II 2 GD c T4
2.53
64,3
Filter AH106F
Regulator AH107R
Gauge AA806
Lubricator AH108L
Muffler AG600 above 1,000 rpm
Oil AD220 1 quart (.94 litres)
Repair kit K210 (4 Vane)
Repair kit K283 (8 Vane)
8AM-NRV-28A
8AM-NRV-32A
8.48
215,4
0.36
9,1
3.00
76,2 DIA.
5.50
139,7
RECOMMENDED
4.91
124,7
45
0.75
19,05 DIA.
0.38 -16 THD. 0.19 DP (4) HOLES
9,7
4,8
1.94 R
49,3
(4 Vanes, Reversible)
(8 Vanes, Reversible)
FEATURES
NEMA 145TC mounting
Any plane operation
Metal muffler AC990 adds 2" height
when installed
1.38
35,1
2.75
69,9
II 2 GD c T4
2.13
54,1
4.50 DIA.
114,3
RECOMMENDED
12
Filter AH106F
Regulator AH107R
Gauge AA806
Lubricator AH108L
Muffler AG600 above 1,000 rpm
Oil AD220 1 quart (.94 litres)
Repair kit K211 (4 Vane)
Repair kit K282 (8 Vane)
5.88 BOLT
149,4 CIRCLE
45
6.50
165,1
0.875 DIA.
22,23
3.84
97,5
0.13
3,3
9.50
241,3
Metric Models
MODEL
8AM-ARV-70
(4 Vanes, Reversible)
Repair kit K282A
8AM-ARV-71
2.75
69,9
1.38
35,1
1/2 BSP
50,0
1/2 BSP
(8 Vanes, Reversible)
Repair kit K282B
3,6
8 mm KEY
5.12
130,0
2.46
62,5
FEATURES
IEC #72 mounting frame
size D90
Any plane operation
Metal muffler AC990 adds 2" height
when installed
0.22
5,6
7.87
199,9
0.79
M8 X 1.25 20,1
DEEP
45 TYP
II 2 GD c T4
9.30
236,2
5.70
144,8 0.14
inches / mm1.97
0.9449
24,0
40 psi
4,2 bar
2,8 bar
1
20 psi
0
1,4 bar
0
180
160
140
120
100
80
60
40
20
0
25
100 psi
80 psi
60 psi
40 psi
7,0 bar
15
5,6 bar
4,2 bar
10
2,8 bar
1,4 bar
20 psi
0
20
TORQUE (Nm)
60 psi
5,6 bar
80 psi
7,0 bar
80
70
60
50
40
30
20
10
0
300
7,0 bar 288
264
240
5,6 bar 216
192
4,2 bar 168
144
120
2,8 bar
96
1,4 bar
72
48
24
0
500 1000 1500 2000 2500
SPEED RPM (OUTPUT)
180
160
140
120
100
80
60
40
20
0
KILOWATT
100 psi
HORSEPOWER
13
Air Motors up to 9 hp, speeds from 300 to 2,000 rpm, max. pressure 100 psi (7 bar)
MODEL
16AM-FCC-1
(6 Vanes, CCW Rotation)
16AM-FRV-2
(6 Vanes, Reversible)
16AM-FCW-28
(6 Vanes, CW Rotation)
inches / mm
FEATURES
Foot, face mounting
Any plane operation
II 2 GD c T4
RECOMMENDED
Filter AH109F
Regulator AH110R
Gauge AA806
Lubricator AH111L
Muffler AG601
Oil AD220
1 quart (.94 litres)
Repair kit K212
(Single Rotation)
Repair kit K213
(Reversible)
Rotation
Single direction
Reversible
16AM-FRV-13
1 PIPE
NONE
1 /4 PIPE
11/4 PIPE
NONE
7
100 psi
4,2 bar
3
2,8 bar
2
1
0
500
1000 1500 2000
SPEED RPM (OUTPUT)
1,4 bar
0
500
1000 1500 2000
SPEED RPM (OUTPUT)
50
inches / mm
2.13
54,1
0.13
3,3
1.41
35,8
5.88
149,4
13.65
346,7 MAX.
80 psi
250
200
60 psi
150
40 psi
100
7,0 bar
5,6 bar
30
4,2 bar
20
2,8 bar
10
20 psi
50
0
40
500
1000 1500 2000
SPEED RPM (OUTPUT)
1,4 bar
0
500
1000 1500 2000
SPEED RPM (OUTPUT)
0.8745
0.8750 DIA.
22,21
22,23
2.75
69,9
140
240
100 psi
200
80 psi
160
60 psi
120
40 psi
80
20 psi
40
0
500
1000 1500 2000
SPEED RPM (OUTPUT)
6.62
168,1
280
120
100
80
60
40
20
0
480
7,0 bar 432
384
336
5,6 bar 288
240
4,2 bar
192
144
2,8 bar
96
1,4 bar
48
0
500
1000 1500 2000
SPEED RPM (OUTPUT)
5.88 BOLT
149,3 CIRCLE
0.03 X 45
0,76 CHAM.
0.41 HOLE (4)
10,4
100 psi
300
TORQUE (Nm)
350
4.497
4.500
114,2
114,3
3.38
85,8
8.00
203,2
5,6 bar
20 psi
Filter AH109F
Regulator AH110R
Gauge AA806
Lubricator AH111L
Muffler AG601
Oil AD220 1 quart (.94 litres)
Repair kit K213
14
40 psi
45
4.00 TYP
101,6
60 psi
4
2
RECOMMENDED
6.75
171,5
80 psi
6
KILOWATT
HORSEPOWER
FEATURES
7,0 bar
7.28
184,9
11/4 PIPE
10
5.62
142,7
(6 Vanes, Reversible)
14.06
357,1
8.44
0.44 -14UNC-2BX 0.62 DP(4)
214,4
11,1
15,7
4.06
4.38
3.62
103,1
111,3
91,9
2.56
1.56
2.12
A
B
0.25 SQ. KEY 65,0
39,6
53,8
6,35
2.00
C
50,8
7.34
186,4
5.78
146,8
2.44 R
4.00
62,0
101,6
3.875
45
98,4
3.38
7.06
2.75
3.38
0.41
0.75
HOLE
(4)
85,8
179,3
69,9
85,8
1.125 DIA.
10,4
19,1
8.00
28,57
203,2
Performance flexibility
Gast's non-lubricated air motors are designed
so that compressor carry-over will not gum up
the vanes. In fact, while no lubrication
whatsoever is required to operate the motors,
small amounts of oil and water will actually
improve the performance.
Corrosion resistant
No oil expenses
If you are using several quarts of oil throughout
the year, you'll eliminate that expense with
non-lubricated air motors.
Nonelectrical sparking
Cool running
No periodic inspection
Minimal maintenance
No-shock starts
Any plane operation
15
Non-lubricated
Air Motors
up to .18 hp, speeds from 1000 to 4,000 rpm, maximum pressure 80 psi (5,6 bar)
MODEL
NL22-NCC-1
(4 Vanes, CCW Rotation)
.88
22,4
NL22-NCW-2
1.44
36,6
inches / mm
(4 Vanes, CW Rotation)
3.59
91,2
NL22-FCC-3
APPROX.
4.78
121,7
NL22-FCW-4
.375
9,53
APPROX.
1.05
26,6
(4 Vanes, CW Rotation)
2x 45fl
.33
8,4 FLAT
2x .25
6,1
.88
22,4
II 2 GD c T4
RECOMMENDED
2X
Filter AH100F
Regulator AH101R
Gauge AA807
Repair kit K285A
2.66
67,4
1.44
36,6
36fl
inches / mm
3.59
91,2
2x 2.72
69,0
.54
1.14
29,0
13,7
APPROX.
5.35
135,8
54fl
1.84
O
46,6
.375
9,5
APPROX.
1.05
26,6
.06
1,5 1.75
44,5
1.25
31,8
.33
8,4
0.125
80 psi
60 psi
0.1
0.075
0.05
0.025
0
40 psi
20 psi
2000 3000 4000
1000
SPEED RPM (OUTPUT)
5,6 bar
0,1
4,2 bar
0,075
2,8 bar
0,05
0,025
1,4 bar
0,0
0
1.00
25,4
1000
2000 3000 4000
SPEED RPM (OUTPUT)
4.5
4
3.5
3
2.5
2
1.5
1
0.5
0
5,6 bar
0,4
60 psi
40 psi
10
40 psi
20 psi
5
0
60 psi
36
10
5,6 bar
8
4,2 bar
6
2,8 bar
30
24
18
4
1,4 bar
2
0
12
6
0,2
0,0
0
16
80 psi
0,3
0,1
20 psi
2.12
53,8
2x .28 x .50 SLOT
0,5
80 psi
TORQUE (Nm)
0,15
0,125
.10
2,5
FLAT
0.2
0.175
KILOWATT
HORSEPOWER
4.69
119,2
2x 1/8 NPT
.81
20,6
1.50
38,1 2.44
62,0
0.15
2x 1/8 NPT
1.25
31,8
FEATURES
4,69
119,2
2x 2.72
69,0
1.14
.54
29,0
13,7
.81
20,6
4,2 bar
2,8 bar
1,4 bar
1000
2000
3000 4000
SPEED RPM (OUTPUT)
Non-lubricated
Air Motors
up to .42 hp, speeds from 300 to 2,000 rpm, maximum pressure 80 psi (5,6 bar)
MODEL
NL32-NCC-1
NL32-NCW-2
inches / mm
3.94
100,1 2.50
63,5
1.25
31,8
(4 Vanes, CW Rotation)
1/4 NPT
1.12
28,4
1.00
25,4
1/4 NPT
1.88
47,8
NL32-NCC-5
4.15
105,4
3.25
82,7
5.82
147,8
.57
14,5
2.250
2.248
57,15
57,10
.45
11,4 FLAT
.5003
O .5001
12,71
12,70
4x 1/4-20 x .44 DP
11,1
2x 1.17
29,6
2x 1.25
31,8
2.21
56,1
NL32-NCW-6
(4 Vanes, CW Rotation)
2x .63
15,9
NL32-NCC-7
(4 Vanes, CCW Rotation)
2x .81
20,6
NL32-NCW-8
(4 Vanes, CW Rotation)
1/4 NPT
3/8 BSP
1/4 NPT
3/8 BSP
.19 SQUARE KEY
2.08 TYP.
52,8
2.06
52,3 .12
3,0
1.41
35,8
.704
17,88
2.19
55,5
.6250
.6245
15,875
15,862
2x .63
15,9
2.08 TYP.
52,8
RECOMMENDED
1.25
31,8
2.50
63,5
6.78
172,2
4.500
2.08 TYP. 4.497
O
114,3
1.88 52,8
114,2
47,8
II 2 GD c T4
inches / mm
6.50
165,1
FEATURES
2x 1.25
31,8
2.08 TYP.
52,8
2x 1.79
45,3
2X .41
10,4
TYP.
2x .81
20,6
Filter AH103F
Regulator AH104R
Gauge AA806
Repair kit K521
OPTIONAL
Foot kit AL220 - each of these models
can be turned into foot mounted
styles with the installation of optional
foot kit AL220, which will add approx.
2" height to the air motor
60 psi
0.2
40 psi
KILOWATT
0.3
20
0,04
80 psi
0.4
5,6 bar
0,03
4,2 bar
0,02
2,8 bar
0,01
0,0
0
2,0
80 psi
15
60 psi
10
40 psi
1,4 bar
500
1000 1500 2000
SPEED RPM (OUTPUT)
4,2 bar
1,0
2,8 bar
0,5
20 psi
500
1000 1500
2000
SPEED RPM (OUTPUT)
5,6 bar
1,5
0,0
0
1,4 bar
500
1000
1500 2000
SPEED RPM (OUTPUT)
40 psi
20 psi
5
0
500
1000 1500 2000
SPEED RPM (OUTPUT)
54
15
5,6 bar
12,5
10
4,2 bar
45
36
7,5
2,8 bar
27
1,4 bar
18
2,5
0
9
0
500
1000 1500 2000
SPEED RPM (OUTPUT)
30
20 psi
0.1
2,5
TORQUE (Nm)
0.5
HORSEPOWER
17
Non-lubricated
Air Motors
up to .82 hp, speeds from 500 to 2,000 rpm, maximum pressure 80 psi (5,6 bar)
MODEL
NL42-NCC-1
inches / mm
3.94
100,1
1.25
1.25
31,8
31,8
NL42-NCW-2
2x 1/4 NPT
1.12
28,4
(4 Vanes, CW Rotation)
Net wt. 18 lbs. (8,2 kg)
NL42-NCC-5
2.250
4.15
105,4
(4
O 2.248
.57
14,5
1.00
25,4
7.02
178,2
3.93
99,8
.45 FLAT
11,43
57,15
57,1
2.22
56,4
.5000
.4995
12,7
12,69
NL42-NCW-6
(4 Vanes, CW Rotation)
.88
2X 22,2
NL42-NCC-7
2x 1.75
44.5
4 X 1/4-20 x .44 DP
11,1
2X .88
22,2
1.37
34,7
11,1
2x 1.75
44.5
FEATURES
Hub or foot mounting
Treated body, rotor, and end plates
for corrosion resistance
No lubrication necessary - no
contaminated air in the work area
Any plane operation
Metal muffler AC980 adds 2" height
when installed
inches / mm
O 6.50
3.94
100,1
1/4 NPT
3/8 BSP
165,1
2.50
1.25 63,5
31,8
2.06
52,3
1/4 NPT
3/8 BSP
RECOMMENDED
.12
3,0
8.01
203,4
II 2 GD c T4
1.41
35,8
2.86
72,6
15,86
Filter AH103F
Regulator AH104R
Gauge AA806
Repair kit K580
2X .88
22,4
OPTIONAL
2X 1.75
44,5
2.08
2.08 TYP.
52,8
52,8
.88
2X 22,2
1.99
50,4
1.75
2X 44,5
TYP.
4,2 bar
0,4
2,8 bar
0,3
0,2
0.25
20 psi
0
1,4 bar
0,1
0
500
1000 1500 2000
SPEED RPM (OUTPUT)
45
40
35
30
25
20
15
10
5
0
0
5
80 psi
60 psi
40 psi
500
1000 1500
2000
SPEED RPM (OUTPUT)
60 psi
40 psi
20 psi
500
1000 1500 2000
SPEED RPM (OUTPUT)
80 psi
5,6 bar
15
4,2 bar
10
60
48
2,8 bar
36
1,4 bar
24
5
12
0
500
1000 1500 2000
SPEED RPM (OUTPUT)
18
30
25
20
15
10
5
0
0
72
20
4,2 bar
2,8 bar
1,4 bar
20 psi
5,6 bar
4
TORQUE (Nm)
40 psi
0,5
0.5
KILOWATT
HORSEPOWER
80 psi
60 psi
5,6 bar
0,6
0.75
0,7
500
1000
1500 2000
SPEED RPM (OUTPUT)
MODEL
inches / mm
NL52-NCC-1
(4 Vanes, CCW Rotation)
.43
10,9
.43
10,9
NL52-NCW-2
1.25
31,7
1.25
31,7
(4 Vanes, CW Rotation)
1.44
36,6
NL52-NCC-3
2.28
57,91
NL52-NCW-4
2.250
57,1
4.16 0.704
17,88
105,7
2 x .75
19,0
1.30
33,0
(4 Vanes, CW Rotation)
2 x 1.75
44,4
1.30
33,0
2.24
56,9
.019
.57
4.83 SQ.KEY 14,5
8.00
203,2
2.68
68,1
3 x 1/4-20
UNC-2B x .44 DP
2x 1/2 NPT
.625
15,9
2 x 1.36
34,5
.019
4.83
2 x 1.76
44,7
4 x 1/4-20
UNC-2B x .44 DP
FEATURES
Hub, NEMA 56C, 6AM, or foot
mounting
Treated body, rotor, and end plates
for corrosion resistance
No lubrication necessary - no
contaminated air in the work area
Any plane operation
Metal muffler AC990 adds 2"
height when installed
8.00
203,2
2.86
72,6
2x 1/2 NPT
II 2 GD c T4
Filter AH106F
Regulator AH107R
Gauge AA806
Repair kit K833
AC990
2.72
69
4 x 3/8-16
UNC-22B
THRU (4)
ON B5.88
BOLT CIRCLE
2.94
75
OPTIONAL
Foot kit AL414 - each of these
models can be turned into foot
mounted styles with the installation
of optional foot kit AL414 , which
will add approx. 2" height to the air
motor
4.50
4.497
114,3
114,22
0.704
2.08
17,88
52,8
2.08
52,8
6.50
165,1
RECOMMENDED
.625
15,9
.12
3,0
2 x 1.75
44,5
2.08
52,8
2.08
52,8
2 x 1.76
44,7
4x 1/4-20
UNC-2B x .44 DP.
11,1
2 x 1.98
49,5
1/2
NPT
100 psi
80 psi
60 psi
40 psi
20 psi
45
40
35
30
25
20
15
10
5
0
7,0 bar
5,6 bar
60
48
4,2 bar
36
2,8 bar
1,4 bar
24
12
0
500 1000 1500 2000 2500 3000
SPEED RPM (OUTPUT)
- - - - -Intermittent (10 minutes on,
10 minutes off) Duty Only
1.25 114,3
31,7 1.25
31,7
100
10
100 psi
80
80 psi
60
60 psi
40
40 psi
20
20 psi
TORQUE (Nm)
12
2.28
57,91
1.73
43,9
5,6 bar
4,2 bar
2,8 bar
1,4 bar
2
0
2 x 1.75
44,4
2.25
57,1
4.53
1.00 115,0
55,4
.625
3 x 5/16-18
15,86
UNC-2B x .44 DP.
Shaft
1.73
43,9
2 x 1/2 NPT
2 x 1.76
44,7
4 x 1/4-20
UNC-2B x .44 DP.
2.11
53,6
2,4
3.0
2.5
2.0
100 psi
80 psi
7,0 bar
2,0
1,6
5,6 bar
1,2
4,2 bar
1.5
60 psi
1.0
40 psi
0,8
2,8 bar
.5
20 psi
0,4
1,4 bar
.38
9,6
1.56
39,6
.019 SQ KEY
4.83
2.00
50,8
8.00
203,2
4.50
72
KILOWATT
80
70
60
50
40
30
20
10
0
0
100
HORSEPOWER
SQ.KEY
.019
4.83
1.25
31,7
1.25
31,7
19
Air-Powered Gearmotors
A.
B.
C.
D.
E.
F.
D. Worm Gear
Forged bronze; geometry and high helix angle give
maximum beam strength, high efficiency.
More flexibility.
More than most standard electric-powered gear
reducers can provide. Gast Gearmotors give you
infinitely variable turning power from 73 to 5200 lb. in.
(8 to 587 Nm) of torque. And Gast Gearmotors are
instantly reversible through easy valving in the air line.
E. Cap Screw
High-strength fasteners with corresponding torque
specifications
prevent loosening or breaking.
F. Seals
Double-dipped and spring-loaded for leak proofing;
tested to ensure compatibility with lubricant.
Spur Gearmotor
1,50
2.00
1.75
1,25
1.50
Model 4AM-GR25
0,75
0,50
HORSEPOWER
KILOWATT
1,00
1.25
1.00
Model 4AM-GR20
0.75
40 psi (2,8 bar)
0.50
0,25
20
More horsepower.
Size for size, weight for weight, you cant beat a Gast
Gearmotor. A typical rotary vane air motor the type
used in gearmotors developing 21/2 hp (1,9 kW) at
1800 rpm and 90 psi (6,2 bar), weighs just 17 pounds
(7,7 kg). A comparable electric motor may be two or
three times heavier.
* Model 1AM-GR11
** Model 1UP-GR11
60 psi (4,2 bar)*
80 psi (5,6 bar)**
40 psi (2,8 bar)*
40 psi (2,8 bar)**
100
200
300
400
SPEED RPM (OUTPUT)
500
More configurations.
That makes it easier for our product to work in your
product. Our gearmotors are available in four mounting configurations.
More life.
Unlike electric-powered gearmotors, theres no
chance of burnout with a Gast Gearmotor. They can
be stalled indefinitely with no heat buildup. Theyre
nonelectrical sparking, too, which makes them ideal
for use in potentially explosive environments places
where you couldnt even consider electricity.
bWARNING: Gast Air Powered Gearmotors are not
self-locking. In applications where a break is required
for safety in case of air pressure failure, call
800/952-4278 for your nearest distributor.
Air-Powered Gearmotors
2AM Series, 20:1 reduction
Max allowable overhung load on the output shaft is 240 lbs. Max allowable thrust load on
the output shaft is 300 lbs.
MODEL
2AM-43A-AF20
(4 Vanes, Reversible)
2x 1/4 NPT
3.25
82,55
FEATURES
2.5
63,5
2.00
50,8
4x 5/16-18 .62 Deep
pattern typ. top & bottom
of gear box
RECOMMENDED
inches / mm
3.81
96,77
Filter AH103F
Regulator AH104R
Gauge AA806
Lubricator AH105L
Oil AD220 1 quart (.94 litres)
Repair kit K509
1.87
47,50
1.63
41,4
4.50
6.50
165,10
2.88
73,15
1.33
33,78
114,3
4.65
118.11
3.05
77,47
3.94
100,08
7.55
191,77
1.72
43,69
10.00
258,83
.188 x 1.00
4.77 x 25.4
KEY
6.25
158,75
4.00
101,6
5.87
149,10
2.13
54.10
DIA..625
15.88
60 psi
20 psi
5
0
30
90 120 150
60
SPEED RPM (OUTPUT)
4,2 bar
8,0
24
6,0
2,8 bar
6
0
30
60
90
120 150
SPEED RPM (OUTPUT)
4,2 bar
0,20
.25
.20
40 psi
.15
KILOWATT
HORSEPOWER
0,25
0,15
2,8 bar
0,10
.10
.05
0
20 psi
30
60
90
120 150
SPEED RPM (OUTPUT)
0,05
0
1,4 bar
90 120 150
60
30
SPEED RPM (OUTPUT)
60 psi
.30
12
1,4 bar
2,0
0,30
.35
18
4,0
30
180
160
140
120
100
80
60
40
20
0
0
20,0
60 psi
40 psi
20 psi
30
60
90 120
SPEED RPM (OUTPUT)
4,2 bar
18,0
TORQUE (Nm)
10
40 psi
15
36
10,0
20
15,0
12,0
9,0
6,0
3,0
150
2,8 bar
1,4 bar
30
60
90 120
SPEED RPM (OUTPUT)
21
150
Air-Powered Gearmotors
2AM Series, 20:1 reduction
Max allowable overhung load on the output shaft is 600 lbs. Max allowable thrust load
on the output shaft is of 500 lbs.
MODEL
Pattern typ. top &
btm. of gear box
2AM-43A-BF20
2.75
69,85
4.19
107,95
(4 Vanes, Reversible)
inches / mm
4x 5/16-18
TAP .62 DEEP
2.5
63,50
FEATURES
20:1 gear reducer
FLANK mounting
Mount on any plane
operation
Metal muffler AC980 provided
not shown. AC980 adds 2"
height when installed.
2X 1/4 NPT
3.81
96.77
5.63
143,00
1.75
44,45
RECOMMENDED
1.63
41,40
Filter AH103F
Regulator AH104R
Gauge AA806
Lubricator AH105L
Oil AD220 1 quart (.94 litres)
Repair kit K509
7.56
192,02
.188 x1.00
KEY
1.87
47,50
DIA. .875
22,25
5.75
146,05
3.81
96.77
7.06
179,32
2.06
52.32
4.31
109.47
3.69
93,73
4.69
119,14
11.32
287,52
2.06
52,32
6.50
165,1
6.78
172,47
counterclockwise
output shaft rotation
30
100 psi
25
80 psi
20
60 psi
15
40 psi
10
20 psi
5
0
30
60
90 120
SPEED RPM (OUTPUT)
15,0
12,0
4,2 bar
21
6,0
2,8 bar
1,4 bar
3,0
0
0,60
100 psi
80 psi
.30
60 psi
.20
40 psi
.10
0
22
30
60
90 120 150
SPEED RPM (OUTPUT)
7,0 bar
0,40
0,30
5,6 bar
0,20
4,2 bar
2,8 bar
35,0
100 psi
0,10
20 psi
300
0,50
.40
30
60
90
120 150
SPEED RPM (OUTPUT)
30,0
240
1,4 bar
30
60
90 120 150
SPEED RPM (OUTPUT)
80 psi
180
120
TORQUE (Nm)
.50
0,70
KILOWATT
HORSEPOWER
36
5,6 bar
9,0
150
50
7,0 bar
60 psi
40 psi
60
0
25,0
7,0 bar
5,6 bar
20,0
15,0
10,0
4,2 bar
2,8 bar
5,0
20 psi
30
60
90 120
SPEED RPM (OUTPUT)
150
1,4 bar
30
60
90
120 150
SPEED RPM (OUTPUT)
Air-Powered Gearmotors
1AM and 1UP Series, 15:1 reduction, 10 95 lbs. in. (1 11 Nm) torque at 40 rpm (minimum speed
reduction)
1AM-NRV-56-GR11
(4 Vanes, Reversible)
1AM-NRV-60-GR11
(8 Vanes, Reversible)
0,20
7,0 bar
60 psi
.15
.10
40 psi
0,15
4,2 bar
0,10
2,8 bar
0,05
20 psi
0
5,6 bar
1,4 bar
0
10
100 psi
RECOMMENDED
45
60 psi
30
40 psi
15
0
inches / mm
30
0.27
6,9
0.42 FLAT
10,7
0.50 DIA.
12,7
OPTIONAL
AG 586 FOOT
2.93
74,4
0.31
7,9 DEEP #10-32 THD. (3)
MODEL
1.50
38,1
3.00
76,2
2,8 bar
1,4 bar
0
1.00
25,4
25
10
20
4,2 bar
6.88
174,8
3.78
96,0
5,6 bar
20 psi
0
7,0 bar
6
100 psi
80 psi
15
60 psi
10
40 psi
5
0
20 psi
0
5,6 bar
36
30
24
4,2 bar
18
2,8 bar
2
0
7,0 bar
DIA. BOLT
CIRCLE
80 psi
TORQUE (Nm)
60
II 2 GD c T4
Filter AH100F
Regulator AH101R
Gauge AA806
Lubricator AH102L
Oil AD220 1 quart (.94 litres)
2.00
Repair kit K278
50,8
(Air motor only, 8 Vane)
Repair kit K201
(Air motor only, 4 Vane)
0,25
80 psi
.20
.05
100 psi
.25
FEATURES
0,30
.30
KILOWATT
HORSEPOWER
MODEL
12
1,4 bar
0
1UP-NRV-4-GR11
(4 Vanes, Reversible)
FEATURES
15:1 gear reducer
Face mounting
Horizontal or shaft down
operation
Muffler AF350
(shown in photo)
0,30
.30
0,25
60 psi
.25
KILOWATT
(8 Vanes, Reversible)
.35
HORSEPOWER
1UP-NRV-11-GR11
80 psi
.20
40 psi
.15
.10
100
200
300
SPEED RPM (OUTPUT)
5,6 bar
0,15
2,8 bar
0,10
0,05
20 psi
.05
4,2 bar
0,20
400
1,4 bar
0
400
II 2 GD c T4
12
80 psi
60
60 psi
40
40 psi
20
0
inches / mm
2.93
74,4
0.31
DEEP
#10-32
THD. (3)
7,9
7.31
185,8
30
0.42 FLAT
10,7
0.50 DIA.
12,7
OPTIONAL
AG 586 FOOT
1.50
38,1
3.00
76,2
2,8 bar
100
200
300
SPEED RPM (OUTPUT)
400
1,4 bar
0
100
200
300
SPEED RPM (OUTPUT)
400
1.00
25,4
0.27
6,9
4.00
101,6
4,2 bar
25
10
20
80 psi
60 psi
15
40 psi
10
20 psi
5
0
100
200
300
SPEED RPM (OUTPUT)
400
36
5,6 bar
4,2 bar
30
24
2,8 bar
18
4
1,4 bar
12
2
0
6
0
100
200
300
SPEED RPM (OUTPUT)
400
DIA. BOLT
CIRCLE
20 psi
TORQUE (Nm)
RECOMMENDED
5,6 bar
10
80
Filter AH100F
Regulator AH101R
Gauge AA806
Lubricator AH102L
Oil AD220 1 quart (.94 litres)
Repair kit K298
(Air motor only, 8 Vane)
Repair kit K286
2.00
(Air motor only, 4 Vane)
50,8
100
200
300
SPEED RPM (OUTPUT)
23
Air-Powered Gearmotors
4AM Series, 10 and 15:1 reduction, 100 630 lbs. in. (11 72 Nm) torque at 30 rpm (minimum speed reduction)
0.25
6,4
MODEL
4AM-RV-75-GR25
(4 Vanes, Reversible)
Net wt. 28 lbs. (12,6 kg)
FEATURES
50
80 psi
60 psi
40 psi
40
5,6 bar
30
4,2 bar
20
2,8 bar
10
20 psi
1,4 bar
0
30
80 psi
40
60 psi
30
20
40 psi
20 psi
10
0
24
18
12
6
0
108
96
84
5,6 bar
72
60
4,2 bar
48
36
2,8 bar
24
1,4 bar
12
0
50 100 150 200 250 300
SPEED RPM (OUTPUT)
1,0
1.2
80 psi
5,6 bar
0,8
1.0
60 psi
0.8
0.6
4,2 bar
0,6
0,4
40 psi
2,8 bar
0.4
0.2
60
50
1.75
44,5
HORSEPOWER
4.75
120,7
0.9997
0.9990
25,392
25,375
60
0.50
12,7
1,4 bar
11.56 APPROX.
293,6
PORT SIZE
1/4 PIPE
6.13
155,7
6.63
168,4
3.56
90.42
0.2505
0.2487
6,363 KEYWAY
6,317
inches / mm
2.63
66,8
2.25
57,2
0,2
20 psi
450
400
350
300
250
200
150
100
50
0
6.13
155,7
3.251
3.249
82,58 DIA.
82,52
2,8 bar
0,4
40 psi
Filter AH103F
Regulator AH104R
Gauge AA806
Lubricator AH105L
Oil AD220 1 quart (.94 litres)
Repair kit K205 (Air motor only)
0,6
0.4
0.2
RECOMMENDED
0.6
II 2 GD c T4
60 psi
0.8
4,2 bar
KILOWATT
FEATURES
0,8
1.0
TORQUE (Nm)
5,6 bar
80 psi
(4 Vanes, Reversible)
1,0
1.2
KILOWATT
4AM-RV-75-GR20
HORSEPOWER
MODEL
0,2
20 psi
0
50
100
150
SPEED RPM (OUTPUT)
200
1,4 bar
0
50
100
150
SPEED RPM (OUTPUT)
200
II 2 GD c T4
80
Filter AH103F
Regulator AH104R
Gauge AA806
Lubricator AH105L
Oil AD220 1 quart (.94 litres)
Repair kit K205 (Air motor only)
6.13
155,7
2.63
66,8
2.25
0.2505
57,2
0.2487
6,363 KEYWAY
6,317
0.25
6,4
11.56 APPROX.
293,6
PORT SIZE
1/4 PIPE
6.13
155,7
24
2.63
66,8
40 psi
200
300
4.75
120,7
0.9997
0.9990
25,392
25,375
1.75
44,5
5,6 bar
40
4,2 bar
2,8 bar
20
20 psi
0
inches /mm
6.63
168,4
3.56
90.42
60 psi
60
1,4 bar
50
100
150
SPEED RPM (OUTPUT)
200
50
100
150
SPEED RPM (OUTPUT)
200
30
50
80 psi
40
60 psi
30
40 psi
20
20 psi
10
0
50
100
150
200
SPEED RPM (OUTPUT)
24
5,6 bar
18
4,2 bar
12
2,8 bar
6
0
1,4 bar
0
50
100
150
SPEED RPM (OUTPUT)
108
96
84
72
60
48
36
24
12
0
200
3.251
3.249
82,58 DIA.
82,52
80 psi
400
100
500
RECOMMENDED
TORQUE (Nm)
600
Air-Powered
Gearmotors
4AM Series, 20:1 reduction, 100 750 lbs. in. (10 82 Nm) torque at 15 rpm (minimum speed reduction)
MODEL
4AM-70C-CB20
Max. allowable end thrust with 0 overhung load is 2259 lbs. (1016,6
kg) at 30 rpm to 1335 lbs. (600,8 kg) at 150 rpm. Max. overhung load
on output shaft with 0 end thrust 1601 lbs. (720,4 kg).
(8 Vanes, Reversible)
Net wt. for standard configuration
60 lbs. (27,0 kg)
FEATURES
20:1 gear reducer
Base mounting
Optional mountings and shaft
locations available
Metal muffler AC980 adds 2" height
when installed
B Mounting (photo)
4AM-70C-CB20
(standard shaft)
5.63
143,0
Filter AH103F
Regulator AH104R
Gauge AA806
Lubricator AH105L
Oil AD220 1 quart (.94 litres)
Repair kit K280A (Air motor only)
2.50
63,5
5.63
143,0
OPPOSITE
SHAFT
LOCATION*
8.81
223,7
8.00
203,2
3.38
85,9
5.25
133,4 6.50
165,1
0.6
60 psi
40 psi
0.2
0
0,6
1.75
44,5
4,2 bar
8.81
223,8 2.50
63,5
5.56
141,2
80 psi
40
60 psi
30
40 psi
20 psi
20
10
0
50
30
24
18
12
6
0
100 psi
60
132
120
7,0 bar 108
96
5,6 bar 84
72
4,2 bar
60
48
2,8 bar
36
1,4 bar
24
12
0
25 50 75 100 125 150
SPEED RPM (OUTPUT)
4.56
115,8
5.63
143,0
6.13
155,7 10.13
257,3
3.00
76,2
11.25
285,8
2.50
63,5
1.25
31,8
14.00
355,6
2.06
52,3
8.56
217,4
5.75
7.13 146,1
181,1
0.25 X 0.13 KEYWAY
6,4
3,3
0.75
19,1
D Mounting
4AM-70C-CD20 *4AM-70C-CH20
(standard shaft)
(opposite shaft)
inches / mm
5.63
143,0
11.44
290,6
5.63
143,0
1,4 bar
36
70
*4AM-70C-CG20
(opposite shaft)
OPPOSITE
SHAFT
LOCATION*
2.63
66,8
2,8 bar
0,2
20 psi
25 50 75 100 125 150
SPEED RPM (OUTPUT)
0.53
13,5 DIA. THRU (4)
0.38 -16 TAP (4) HOLES
9,7 TOP & BOTTOM
5,6 bar
0,4
0.4
3.19
81,0
4.00
6.38 101,6
162,1 8.00
9.25 203,2
234,9
inches / mm
KILOWATT
HORSEPOWER
80 psi
4AM-70C-CC20
(standard shaft)
7,0 bar
0,8
0.8
2.50
63,5
1.69
42,9 2.63 0.75
66,8 19,1
C Mounting
1,0
1.0
14.06
357,1
14.00
355,6 11.44
290,6
2.06
4.56
52,3
115,8
8.88
225,6
1.25
31,75
2.94
74,7
1.2
*4AM-70C-CF20
(opposite shaft)
inches / mm
RECOMMENDED
2.50
63,5
5.63
143,0
100
80
600
100 psi
500
80 psi
400
60 psi
300
200
40 psi
100
0
20 psi
25 50 75 100 125 150
SPEED RPM (OUTPUT)
TORQUE (Nm)
700
7,0 bar
60
5,6 bar
40
4,2 bar
2,8 bar
20
1,4 bar
0
2.06
52,3
11.69
296,9
14.32
363,7
4.81
122,2
8.38
212,9
1.25
31,75
OPPOSITE
SHAFT
LOCATION*
2.63
6.31 66,8 3.00
160,3 10.50 76,2
266,7 11.75
298,5
0.75
19,1
2.50
63,5
3.13
79,5
4.44
112,8
25
Air-Powered
Gearmotors
4AM Series, 40:1 reduction, 100 1250 lbs. in. (11 140 Nm) torque at 10 rpm (minimum speed reduction)
MODEL
4AM-70C-CB40
(8 Vanes, Reversible)
Net wt. for standard configuration
60 lbs. (27,0 kg)
B Mounting (photo)
FEATURES
*4AM-70C-CF40
(opposite shaft)
inches / mm
5.63
143,0
RECOMMENDED
4AM-70C-CB40
(standard shaft)
2.50
63,5
Filter AH103F
Regulator AH104R
Gauge AA806
Lubricator AH105L
Oil AD220 1 quart (.94 litres)
Repair kit K280A (Air motor only)
7.44
189,0 2.63
66,7
8.19
208,0 3.69
93,7
5.63
143,0
OPPOSITE
SHAFT
LOCATION*
8.81
223,7
8.00
203,2
1.25
31,75
2.94
74,7
14.06
357,1
14.00
355,6 11.44
290,6
4.56
2.06
115,8
52,3
8.88
225,6
3.38
85,9
5.25
133,4 6.50
165,1
2.50
63,5
1.69
42,9 2.63 0.75
66,8 19,1
3.19
81,0
4.00
101,6
6.38
162,1 8.00
9.25 203,2
234,9
0.53
DIA. THRU (4)
13,5
0.38 -16 TAP (4) HOLES
9,7 TOP & BOTTOM
0,8
0.8
4AM-70C-CC40 *4AM-70C-CG40
(standard shaft)
(opposite shaft)
inches / mm
0,6
80 psi
0.6
KILOWATT
HORSEPOWER
C Mounting
7,0 bar
100 psi
5,6 bar
0,4
60 psi
0.4
0,2
40 psi
0.2
20 psi
20
40
60
SPEED RPM (OUTPUT)
4,2 bar
80
1.75
44,5
2,8 bar
1,4 bar
20
40
60
SPEED RPM (OUTPUT)
100 psi
60
50
80 psi
40
60 psi
30
40 psi
20 psi
20
10
0
25
50
SPEED RPM (OUTPUT)
24
18
12
6
0
75
8.81
223,8 2.50
63,5
5.56
141,2
5.63
143,0
6.13
155,7 10.13
257,3
3.00
76,2
11.25
285,8
150
1200
125
100 psi
800
TORQUE (Nm)
1000
600
60 psi
400
40 psi
D Mounting
4AM-70C-CD40
(standard shaft)
26
20 psi
0
25
50
SPEED RPM (OUTPUT)
75
*4AM-70C-CH40
(opposite shaft)
inches / mm
5.63
143,0
11.69
296,9
14.32
363,7
4.81
122,2
5,6 bar
75
4,2 bar
50
2.50
63,5
5.63
143,0
2.06
52,3
7,0 bar
2,8 bar
25
200
5.75
7.13 146,1
181,1
0.25 X 0.13 KEYWAY
6,4
3,3
0.75
19,1
100
80 psi
8.56
217,4
2.50
63,5
1.25
31,8
2.06
52,3
80
132
120
7,0 bar 108
96
84
5,6 bar
72
60
4,2 bar
48
2,8 bar
36
24
1,4 bar
12
0
25
50
75
SPEED RPM (OUTPUT)
30
14.00
355,6
11.44
290,6
5.63
143,0
36
70
4.56
115,8
OPPOSITE
SHAFT
LOCATION*
2.63
66,8
1,4 bar
0
25
50
SPEED RPM (OUTPUT)
75
8.38
212,9
1.25
31,75
OPPOSITE
SHAFT
LOCATION*
2.63
6.31 66,8 3.00
160,3 10.50 76,2
266,7 11.75
298,5
0.75
19,1
2.50
63,5
3.13
79,5
4.44
112,8
Air-Powered Gearmotors
4AM Series, 60:1 reduction, 200 1650 lbs. in. (25 185 Nm) torque at 5 rpm (minimum speed reduction)
MODEL
4AM-70C-CB60
(8 Vanes, Reversible)
Net wt. for standard configuration
60 lbs. (27,0 kg)
FEATURES
60:1 gear reducer
Base mounting
Optional mountings and shaft
locations available
Metal muffler AC980 adds 2" height
when installed
B Mounting (photo)
4AM-70C-CB60 *4AM-70C-CF60
(standard shaft)
(opposite shaft)
inches / mm
RECOMMENDED
5.63
143,0
Filter AH103F
Regulator AH104R
Gauge AA806
Lubricator AH105L
Oil AD220 1 quart (.94 litres)
Repair kit K280A (Air motor only)
0,8
100 psi
80 psi
0.6
8.81
223,7
8.00
203,2
60 psi
0.2
0
20 psi
10
20
30
40
SPEED RPM (OUTPUT)
50
1.75
44,5
2,8 bar
1,4 bar
10
20
30
40
SPEED RPM (OUTPUT)
50
8.81
223,8 2.50
63,5
5.56
141,2
175
150
TORQUE (Nm)
80 psi
5,6 bar
100
60 psi
50
3.00
76,2
11.25
285,8
2.50
63,5
1.25
31,8
8.56
217,4
5.75
7.13 146,1
181,1
0.25 X 0.13 KEYWAY
6,4
3,3
0.75
19,1
D Mounting
2,8 bar
25
20 psi
10
20
30
40
SPEED RPM (OUTPUT)
2.06
52,3
4,2 bar
75
50
40 psi
5.63
143,0
6.13
155,7 10.13
257,3
7,0 bar
125
14.00
355,6
11.44
290,6
4.56
115,8
5.63
143,0
200
100 psi
2.63
66,8
OPPOSITE
SHAFT
LOCATION*
0.53
DIA. THRU (4)
13,5
0.38 -16 TAP (4) HOLES
9,7 TOP & BOTTOM
4,2 bar
3.19
81,0
4.00
101,6
6.38
162,1 8.00
9.25 203,2
234,9
C Mounting
5,6 bar
0,2
40 psi
2.50
63,5
1.69
42,9 2.63 0.75
66,8 19,1
4AM-70C-CC60 *4AM-70C-CG60
(standard shaft)
(opposite shaft)
inches / mm
0,4
0.4
OPPOSITE
SHAFT
LOCATION*
7,0 bar
0,6
KILOWATT
HORSEPOWER
0.8
5.63
143,0
3.38
85,9
5.25
133,4 6.50
165,1
2.50
63,5
1.25
31,75
2.94
74,7
14.06
357,1
14.00
355,6 11.44
290,6
2.06
4.56
52,3
115,8
8.88
225,6
4AM-70C-CD60 *4AM-70C-CH60
(standard shaft)
(opposite shaft)
inches / mm
1,4 bar
0
10
20
30
40
SPEED RPM (OUTPUT)
50
5.63
143,0
2.50
63,5
5.63
143,0
36
70
100 psi
60
50
80 psi
40
60 psi
30
40 psi
20 psi
20
10
0
10
20
30
40
SPEED RPM (OUTPUT)
50
30
24
18
12
6
0
132
120
7,0 bar 108
96
5,6 bar 84
72
4,2 bar
60
48
2,8 bar
36
24
1,4 bar
12
0
10
20
30
40
50
SPEED RPM (OUTPUT)
80
2.06
52,3
11.69
296,9
14.32
363,7
4.81
122,2
8.38
212,9
1.25
31,75
OPPOSITE
SHAFT
LOCATION*
2.63
6.31 66,8 3.00
160,3 10.50 76,2
266,7 11.75
298,5
0.75
19,1
2.50
63,5
3.13
79,5
4.44
112,8
27
Air-Powered Gearmotors
6AM Series, 10:1 reduction, 100 950 lbs. in. (10 110 Nm) torque at 30 rpm (minimum speed reduction)
MODEL
Max. allowable end thrust with 0 overhung load is 1640
lbs. (738,0 kg) at 60 rpm to 923 lbs. (415,4 kg) at 300
rpm. Max. overhung load on output shaft with 0 end
thrust 1601 lbs. (720,5 kg).
6AM-22A-CB10
(8 Vanes, Reversible)
Net wt. for standard configuration
56 lbs. (25,2 kg)
FEATURES
10:1 gear reducer
Base mounting
Optional mountings and shaft
locations available
Muffler AC990 (not shown)
B Mounting (photo)
6AM-22A-CB10 *6AM-22A-CF10
(standard shaft)
(opposite shaft)
inches / mm
8.88
RECOMMENDED
Filter AH106F
Regulator AH107R
Gauge AA806
Lubricator AH108L
Oil AD220 1 quart (.94 litres)
Repair kit K281 (Air motor only)
5.63
143,0
1/2 NPT PIPE (2)
0.25 X 0.13 KEYWAY
6,4
3,3
225,6
8.00
203,2
3.38
85,9
5.25
133,4 6.50
165,1
2.50
63,5
1.69
42,9 2.63
66,8
80 psi
2.0
7,0 bar
2,0
5,6 bar
40 psi
2,8 bar
0,5
0.5
20 psi
50 100 150 200 250 300
SPEED RPM (OUTPUT)
2.63
66,8
1,4 bar
50 100 150 200 250 300
SPEED RPM (OUTPUT)
8.81
223,8 2.75
69,9
5.56
141,2
5.63
143,0
100 psi
80 psi
600
60 psi
400
TORQUE (Nm)
100
800
5,6 bar
40
5.63
143,0
60
60 psi
40
40 psi
20 psi
20
0
80
50
40
30
20
10
0
5.63
143,0
3.13
79,5
28
80 psi
60
240
216
7,0 bar 192
5,6 bar 168
144
120
4,2 bar
96
72
2,8 bar
48
1,4 bar
24
0
50 100 150 200 250 300
SPEED RPM (OUTPUT)
69,9
100
5.75
7.13 146,1
181,1
0.25 0.13
X
KEYWAY
6,4
3,3
0.75
19,1
1,4 bar
140
100 psi
8.56
217,4
6AM-22A-CD10 *6AM-22A-CH10
(standard shaft)
(opposite shaft)
inches / mm
2.75
2,8 bar
120
3.00
76,2
11.25
285,8
2.50
63,5
1.25
31,8
4,2 bar
3.13
79,5
D Mounting
60
20
20 psi
0 50 100 150 200 250 300
SPEED RPM (OUTPUT)
15.63
397,0
7,0 bar
80
40 psi
200
0
6.13
155,7 10.13
257,3
120
12.50
317,5
5.63
143,0
4.56
115,8
OPPOSITE
SHAFT
LOCATION*
4,2 bar
1,0
1.0
2.31
58,7
1,5
60 psi
1.5
KILOWATT
HORSEPOWER
2.5
C Mounting
2,5
100 psi
3.19
81,0
4.00
101,6
6.38
162,1 8.00
9.25 203,2
234,9
0.75
19,1
6AM-22A-CC10 *6AM-22A-CG10
(standard shaft)
(opposite shaft)
inches / mm
3,0
3.0
3.13
79,5
223,7
15.63
397,0 12.50
317,5
4.56
115,8
OPPOSITE
SHAFT
LOCATION* 8.81
7.88
200,2 2.63
66,7
8.63
219,2 3.69
1.25
93,7
31,75
2.94
74,7
5.63
143,0
2.75
69,9
12.75
323,9
15.88
403,4
4.81
122,2
8.38
212,9
1.25
31,75
OPPOSITE
SHAFT
LOCATION*
2.63
6.31 66,8 3.00
160,3 10.50 76,2
266,7 11.75
298,5
0.75
19,1
2.50
63,5
3.13
79,5
4.44
112,8
Air-Powered Gearmotors
6AM Series, 20:1 reduction, 225 1550 lbs. in. (30 180 Nm) torque at 15 rpm (minimum speed reduction)
MODEL
6AM-22A-DB20
(8 Vanes, Reversible)
Net wt. for standard configuration
100 lbs. (45,0 kg)
FEATURES
20:1 gear reducer
Base mounting
Optional mountings and shaft
locations available
Muffler AC990 (not shown)
B Mounting (photo)
6AM-22A-DB20 *6AM-22A-DF20
(standard shaft)
(opposite shaft)
inches / mm
RECOMMENDED
Filter AH106F
Regulator AH107R
Gauge AA806
Lubricator AH108L
Oil AD220 1 quart (.94 litres)
Repair kit K281 (Air motor only)
7.06
179,3
1/2 NPT PIPE (2)
0.38 X 0.19 KEYWAY
9,7
4,8
4.00
101,6
6.13
1.55,7 7.75
196,9
2,5
80 psi
1.5
60 psi
1.0
2,0
1,5
2.31
58,7
2,8 bar
0,5
20 psi
9.50
241,3 2.75
69,9
6.25
158,8
1400
1000
800
60 psi
600
40 psi
150
100
3.56
7.13
181,1 11.88 90,4
301,8 13.38
339,9
4,2 bar
20 psi
0
7.06
179,3
7.06
179,3
100
80 psi
80
60
60 psi
40
40 psi
20 psi
20
0
100 psi
60
50
40
30
20
10
0
69,9
7.06
179,3
120
240
216
7,0 bar 192
5,6 bar 168
144
120
4,2 bar
96
72
2,8 bar
48
1,4 bar
24
0
25 50 75 100 125 150
SPEED RPM (OUTPUT)
6.13
8.50 155,7
215,9
0.38 0.19
9,7 X 4,8 KEYWAY
0.81
20,6
9.81
249,2
6AM-22A-DD20 *6AM-22A-DH20
(standard shaft)
(opposite shaft)
inches / mm
2.75
1,4 bar
0
3.31
84,1
1.50
38,1
D Mounting
2,8 bar
50
400
200
7,0 bar
5,6 bar
TORQUE (Nm)
100 psi
80 psi
1200
3.13
79,5
7.06
179,3
200
17.38
441,5
14.25
362,0
5.44
138,2
OPPOSITE
SHAFT
LOCATION*
3.25
82,6
1,4 bar
0
C Mounting
4,2 bar
1,0
3.75
95,3
4.75
120,7
7.50
190,5 9.50
11.13 241,3
282,7
0.88
22,4
6AM-22A-DC20 *6AM-22A-DG20
(standard shaft)
(opposite shaft)
inches / mm
5,6 bar
40 psi
0.5
3.31
84,1
2.00
50,8 3.06
77,7
7,0 bar
KILOWATT
HORSEPOWER
100 psi
3.13
79,5
9.38
238,3
2.0
17.38
441,5 14.25
362,0
5.44
138,2
OPPOSITE
SHAFT
LOCATION*
1.50
38,1
3.50
88,9
2.5
7.06
179,3
2.75
69,9
10.00
254,0
9.06
230,1 3.25
82,6
9.94
252,5 4.38
111,3
3.0
10.56
268,2
3.13
79,5
14.50
368,3
17.63
447,8
5.69
144,5
9.94
252,5
1.50
38,1
OPPOSITE
SHAFT
LOCATION*
3.25
7.56 82,6 3.56
192,0 12.75 90,4
323,9 14.00
355,6
0.81
20,6
3.31
84,1
4.00
101,6
5.00
127,0
29
Air-Powered Gearmotors
6AM Series, 40:1 reduction, 250 2500 lbs. in. (30 275 Nm) torque at 8 rpm (minimum speed reduction)
MODEL
6AM-22A-GB40
(8 Vanes, Reversible)
Net wt. for standard configuration
104 lbs. (46,8 kg)
FEATURES
40:1 gear reducer
Base mounting
Optional mountings and shaft
locations available
Muffler AC990 (not shown)
RECOMMENDED
Filter AH106F
Regulator AH107R
Gauge AA806
Lubricator AH108L
Oil AD220 1 quart (.94 litres)
Repair kit K281 (Air motor only)
B Mounting (photo)
6AM-22A-GB40 *6AM-22A-GF40
(standard shaft)
(opposite shaft)
inches / mm
10.86
7.06 275,8
179,3
1/2 NPT PIPE (2)
2.75
0.38 X 0.19 KEYWAY
69,9
9,7
4,8
2,0
100 psi
1.5
80 psi
5,6 bar
1,0
1.0
60 psi
20 psi
0
25
50
SPEED RPM (OUTPUT)
3.50
88,9
4,2 bar
0,5
40 psi
0.5
75
OPPOSITE
SHAFT
LOCATION*
9.06
230,1 3,25
82,6
10.88
276,4 4.38
1.50
111,3
38,1
7,0 bar
1,5
KILOWATT
HORSEPOWER
2.0
6.12
155,4
2,8 bar
9.38
238,3
4.00
101,6
2.00
50,8 3.06
77,7
25
50
SPEED RPM (OUTPUT)
7.75
196,9
C Mounting
6AM-22A-GC40 *6AM-22A-GG40
(standard shaft)
(opposite shaft)
inches / mm
5,6 bar
150
60 psi
1000
7,0 bar
200
80 psi
1500
40 psi
2.31
58,7
4,2 bar
100
500
0
250
TORQUE (Nm)
2000
20 psi
25
50
SPEED RPM (OUTPUT)
75
2,8 bar
1,4 bar
25
50
SPEED RPM (OUTPUT)
100
100 psi
80
80 psi
60
60 psi
40
40 psi
20
0
20 psi
0
25
50
SPEED RPM (OUTPUT)
75
50
40
30
20
10
0
240
216
7,0 bar 192
168
5,6 bar 144
120
4,2 bar
96
72
2,8 bar
48
1,4 bar
24
0
25
50
75
SPEED RPM (OUTPUT)
3.75
95,3
7.13
181,1
30
120
60
OPPOSITE
SHAFT
LOCATION*
19.31
490,5 16.19
411,2
7.16
181,9
3.13
79,5
6.25
158,8
2.75
7.06
69,9
179,3
75
3.25
82,6
50
0
75
300
100 psi
3.75
95,3
4.75
120,7
7.50
190,5 9.50
11.13 241,3
382,7
0.88
22,4
1,4 bar
19.31
490,5 16.19
411,2
3.13
7.16
79,5
181,9
7.06
179,3
11.88
13.38 301,8
339,9
1.50 DIA.
38,1
0.81
20,6
6.12
155,4
8.50
215,9
Air-Powered Gearmotors
8AM Series, 20:1 reduction, 400 2550 lbs. in. (50 290 Nm) torque at 15 rpm (minimum speed reduction)
MODEL
8AM-32A-FB20
Max. allowable end thrust with 0 overhung load is 3552
lbs. (1598,4 kg) at 30 rpm to 2154 lbs. (969,3 kg) at 125
rpm. Max. overhung load on output shaft with 0 end
thrust 2857 lbs. (1285,7 kg).
(8 Vanes, Reversible)
Net wt. for standard configuration
111 lbs. (50,0 kg)
FEATURES
20:1 gear reducer
Base mounting
Optional mountings and shaft
locations available
Muffler AC990 (not shown)
B Mounting (photo)
8AM-32A-FB20 *8AM-32A-FF20
(standard shaft)
(opposite shaft)
10.56
inches / mm
RECOMMENDED
Filter AH106F
Regulator AH107R
Gauge AA806
Lubricator AH108L
Muffler AG600 (above 1,000 rpm)
Oil AD220 1 quart (.94 litres)
Repair kit K282 (Air motor only)
7.06
179,3
1/2 NPT PIPE (2)
0.38 X 0.19 KEYWAY
9,7
4,8
9.31
236,5 3.25
82,6
10.19
258,8 4.38
111,3
3.0
3.84
97,5
9.38
238,3
4.00
101,6
6.13
1.55,7 7.75
196,9
3.31
84,1
2.00
50,8 3.06
77,7
0.88
22,4
3.75
95,3
4.75
7.50 120,7
190,5 9.50
11.13 241,3
282,7
1.5
0,5
25
50
75 100
SPEED RPM (OUTPUT)
125
1,4 bar
0
25
50
75 100
SPEED RPM (OUTPUT)
125
9.50
241,3 2.75
69,9
6.25
158,8
300
2500
250
1000
500
50
20 psi
0
25
50
75 100
SPEED RPM (OUTPUT)
125
8AM-32A-FD20
inches / mm
1,4 bar
0
25
50
75 100
SPEED RPM (OUTPUT)
150
100 psi
125
80 psi
100
60 psi
75
40 psi
50
20 psi
25
0
25
50
75 100
SPEED RPM (OUTPUT)
125
90
80
70
60
50
40
30
20
10
0
7.06
179,3
324
288
7,0 bar
252
216
5,6 bar
180
144
4,2 bar
108
2,8 bar
72
1,4 bar
36
0
25
50
75 100 125
SPEED RPM (OUTPUT)
175
2.75
69,9
125
0.53
13,5 DIA. THRU (4)
6.13
8.50 155,7
215,9
0.38 0.19
9,7 X 4,8 KEYWAY
0.81
20,6
D Mounting
2,8 bar
100
40 psi
9.31
236,5
4,2 bar
150
60 psi
3.31
84,1
1.50
38,1
5,6 bar
200
80 psi
1500
TORQUE (Nm)
2000
7.13
181,1
3.56
7.13
181,1 11.88 90,4
301,8 13.38
339,9
7,0 bar
100 psi
3.84
97,5
18.50
469,9
14.97
380,2
2.56
65,0
2,8 bar
1,0
20 psi
0
4,2 bar
1,5
40 psi
1.0
8AM-32A-FC20
inches / mm
2,0
60 psi
2.0
C Mounting
5,6 bar
80 psi
2.5
7,0 bar
2,5
KILOWATT
HORSEPOWER
100 psi
0.5
18.50
469,9 14.97
380,2
5.44
138,2
3,0
3.5
7.06
179,3
OPPOSITE
SHAFT
LOCATION*
1.50
38,1
2.75
69,9
10.00
254,0
3.50
88,9
4.0
268,2
15.22
386,6
18.75
476,3
5.69
144,5
9.94
252,5
1.50
38,1
3.31
84,1
3.25
7.56 82,6 3.56
192,0 12.75 90,4
323,9 14.00
355,6
0.81
20,6
4.00
101,6
5.00
127,0
31
Air-Powered Gearmotors
16AM Series, 20:1 reduction, 775 5200 lbs. in. (90 580 Nm) torque at 15 rpm (minimum speed reduction)
MODEL
Max. allowable end thrust with 0
overhung load is 3552 lbs. (1598,4 kg) at
30 rpm to 2154 lbs. (969,3 kg) at 100 rpm.
Max. overhung load on output shaft with
0 end thrust 2857 lbs. (1285,7 kg).
16AM-13-HB20
(6 Vanes, Reversible)
Net wt. for standard configuration
163 lbs. (73,4 kg)
FEATURES
20:1 gear reducer
Base mounting
Optional mountings and shaft
locations available
RECOMMENDED
Filter AH109F
Regulator AH110R
Gauge AA806
Lubricator AH111L
Muffler AG601
Oil AD220 1 quart (.94 litres)
Repair kit K213 (Air motor only)
B Mounting (photo)
10.86
8.12 275,8
206,2
1-1/4 NPT PIPE (2)
4.25
0.50 X 0.25 KEYWAY
108,0
12,7 6,4
5
100 psi
KILOWATT
HORSEPOWER
60 psi
3
40 psi
3
4,2 bar
4.44
115,6
2
2,8 bar
20 psi
0
1.8750
1.8745
47,625 DIA.
47,612
7.62
193,5
1,4 bar
25
50
75
SPEED RPM (OUTPUT)
100
25
50
75
SPEED RPM (OUTPUT)
5.00
127,0
2.50
63,5 3.81
96,8
700
5000
600
3000
25
50
75
SPEED RPM (OUTPUT)
100
OPPOSITE
SHAFT
LOCATION*
25
50
75
SPEED RPM (OUTPUT)
8.62
8.12 218,9
206,2
0.50
19,7
5.00
127,0
100
100 psi
200
80 psi
150
60 psi
100
40 psi
20 psi
50
0
25
50
75
SPEED RPM (OUTPUT)
100
250
120
100
80
60
40
20
0
480
7,0 bar 432
384
336
5,6 bar
288
240
4,2 bar
192
144
2,8 bar
96
1,4 bar
48
0
25
50
75
100
SPEED RPM (OUTPUT)
32
140
5.88
149,4
8.12
206,2
1,4 bar
26.48
672,6 20.86
529,8
8.21
208,5
4.25
108,0
2,8 bar
100
20 psi
3.28
83,3
4,2 bar
200
1000
16AM-13-HC20 *16AM-13-HG20
(standard shaft)
(opposite shaft)
inches / mm
7,0 bar
300
40 psi
0.41
10,4 DIA. THRU (4)
0.44 -14 TAP (4) HOLES
11,2 (TYP. 8)
0.66 DIA. THRU (4)
16,7
100
5,6 bar
400
60 psi
2000
4.25
108,0
5.56
8.50 141,2
215,9 11.12
13.25 282,4
336,6
500
80 psi
1.00
25,4
1.38
35,1
C Mounting
TORQUE (Nm)
100 psi
4000
2.75
69,9
9.75
247,7
12.63
312,4
6.77
172,0
1.88 DIA.
47,8
8.21
208,5
2.12 OPPOSITE
53,8 SHAFT
5,6 bar
80 psi
26.48
672,6
4.25
108,0
8.12
206,2
LOCATION*
3.06
77,4
3.75
95,3
7,0 bar
16AM-13-HB20 *16AM-13-HF20
(standard shaft)
(opposite shaft)
inches / mm
8.69
220,7
14.88
16.25 378,0
412,8
0.81
20,6
1.88 DIA.
6.12
47,8
8.50 155,4
4.44
215,9
112,8
0.50 X 0.25 KEYWAY
12,7 6,4
Filters
Regulators
Lubricators
Filters
Regulators
Lubricators
FILTERS
Gast Part
Number
Port
Size
SPECIFICATIONS
Flow*
SCFM
+AH100F
+AH103F
+AH106F
+AH109F
/8" NPTF
1
/4" NPTF
1
/2" NPTF
1" NPTF
Used
With
18
1AM/1UP/NL22
50 2AM/4AM/NL32/NL42
117
6AM/8AM/NL52
365
16AM
3.25 (82,6)
5.84 (148,3)
6.69 (169,9)
10.44 (265,2)
0.38 (9,7)
0.69 (17,5)
0.67 (17,0)
1.25 (31,8)
AH101R
AH104R
AH107R
AH110R
/8" NPTF
/4" NPTF
1
/2" NPTF
1" NPTF
1
5 micron
PORT THREADS:
All ports NPTF
Regulator Two ports 1/4" NPTF, can be
used as additional outlet ports, full flow
1
/4," 1/8" NPTF for AH101R model.
REGULATORS
Port
Size
FILTER ELEMENT:
GAUGE PORTS:
*SCFM = Standard cubic feet per minute at 100 psi inlet and 5 psi pressure drop.
+Metal Bowl
Gast Part
Number
PRESSURE RATING:
Flow*
SCFM
Used
With
11
1AM/1UP/NL22
50 2AM/4AM/NL32/NL42
130
6AM/8AM/NL52
360
16AM
*SCFM = Standard cubic feet per minute at 100 psi inlet, 80 psi secondary setting and 10 psi pressure drop.
PRESSURE AND
TEMPERATURE RATINGS:
Polycarbonate Bowls
200 psi at 120F (14 bar at 49C) or less
100 psi at 175F (7 bar at 80C) or less
METAL BOWLS:
LUBRICATORS
BOWLS:
Gast Part
Number
+AH102L
+AH105L
+AH108L
+AH111L
Port
Size
Flow*
SCFM
Used
With
/8" NPTF
1
/4" NPTF
1
/2" NPTF
1" NPTF
13
20
90
290
1AM/1UP
2AM/4AM
6AM & 8AM
16AM
1.77 (45,0)
2.56 (65,0)
3.91 (99,3)
4.50 (114,3)
3.37 (85,6)
5.75 (146,1)
6.69 (169,9)
10.24 (260,1)
1.76 (44,7)
1.85 (47,0)
1.88 (47,8)
2.22 (56,4)
Metal bowl
BOWL CAPACITY:
1 ounce for 1/8" model
5 ounce for 1/4" model
8 ounce for 1/2" model
32 ounce for 1" model
*SCFM = Standard cubic feet per minute at 100 psi inlet and 5 psi pressure drop.
+Metal Bowl
Filters
Regulators
Lubricators
A
A
33
Gauges Mufflers
Mufflers Foot
FootAssemblies
Assemblies
Gauges
GAUGES
If a gauge is required for your Gast Regulator,
please order as a separate item:
Gast Part No.
AA806
Used On
AH104R
AH107R
AH110R
Description
/4" NPS, 0-160 psi
MUFFLERS
Gast Part
Number
AF350 (Metal)
AC980 (Metal)
AC990 (Metal)
AG601* (Metal)
Used
On
1AM/1UP/NL22
2AM/4AM/NL32/NL42
6AM/8AM
16AM
Dimensions - in (mm)
A
B
1.06 (27)
1.72 (44)
2.72 (69)
3.12 (79)
2.81 (71)
2.31 (59)
2.94 (75)
21.22 (539)
1/8" NPT
1/4" NPT
1/2" NPT
1 1/4" NPT
Metal Style
Metal Style
(AF350 / AG601)
(AC980 / AC990)
FOOT ASSEMBLIES FOR 1AM AND 1UP AIR MOTORS AND GEARMOTORS
FAST AND SIMPLE INSTALLATION
GAST now offers two foot assemblies in kit form:
AG585 for 1AM and 1UP Air Motors, kit includes foot,
three mounting screws and instruction sheet.
AG586 for 1AM and 1UP Gearmotors, kit includes foot
and three mounting screws.
1.84 B.C.
46,7
2.81
71,4
1.75
44,5
0.75
19,1
1.50
38,1
2.44
62,0
0.28 X 0.50 LONG SLOT (2)
7,1 12,7
AG585
1.75
44,5
1.00
25,4
O 2.00 B.C.
50,8
3.75
95,3
2.50
63,5
34
AG586
1.38
35,1
3.00
76,2
0.28 SLOT (4)
7,1
0.69
17,5
1.50
38,1
3.00
76,2
1.00
25,4