Professional Documents
Culture Documents
Requirement Cisco Command: Note That The Zeroes Are Not Missing
Requirement Cisco Command: Note That The Zeroes Are Not Missing
Cisco Command Router(config)#line con 0 Router(config-line)#login Router(config-line)#password cisco Router(config)#line vty 0 4 Router(config-line)#login Router(config-line)#password cisco Router(config)#line con 0 Router(config-line)#exec-timeout 0 0 Router(config)#enable password cisco Router(config)#enable secret peter
Set the enable password to cisco Set the enable secret password to peter. This password overrides the enable password and is encypted within the config file Enable an interface To disable an interface Set the clock rate for a router with a DCE cable to 64K Set a logical bandwidth assignment of 64K to the serial interface
Router(config-if)#no shutdown Router(config-if)#shutdown Router(config-if)clock rate 64000 Router(config-if)bandwidth 64 Note that the zeroes are not missing Router(config-if)#ip addr 10.1.1.1 255.255.255.0 Router(config)#router rip Router(config-router)#network 172.16.0.0 Router(config)#no router rip Router(config)#router igrp 200 Router(config-router)#network 172.16.0.0 Router(config)#no router igrp 200 Router(config)#ip route 172.16.1.0 255.255.255.0 172.16.2.1 5
Disable IGRP Static route the remote network is 172.16.1.0, with a mask of 255.255.255.0, the next hop is 172.16.2.1, at a cost of 5 hops
Disable CDP for the whole router Enable CDP for he whole router Disable CDP on an interface
Cisco Router Show Commands Requirement View version information View current configuration (DRAM) View startup configuration (NVRAM) Show IOS file and flash space Shows all logs that the router has in its memory View the interface status of interface e0 Overview all interfaces on the router View type of serial cable on s0 show version show running-config show startup-config show flash show log show interface e0 show ip interfaces brief show controllers 0 (note the space between the 's' and the '0') show cdp neighbor show cdp entry * show ip protocols show ip route show access-lists Cisco Command
Display a summary of connected cdp devices Display detailed information on all devices Display current routing protocols Display IP routing table Display access lists, this includes the number of displayed matches Check the router can see the ISDN switch Check a Frame Relay PVC connections
show lmi traffic stats Display the frame inverse ARP table Cisco Router Basic Operations Requirement Enable Return to user mode from privileged Exit Router Recall last command Recall next command Suspend or abort Refresh screen output Compleat Command
Cisco Command Enter privileged mode disable Logout or exit or quit up arrow or <Ctrl-P> down arrow or <Ctrl-N> <Shift> and <Ctrl> and 6 then x <Ctrl-R> TAB
Requirement Save the current configuration from DRAM to NVRAM Merge NVRAM configuration to DRAM Copy DRAM configuration to a TFTP server Merge TFTP configuration with current router configuration held in DRAM Backup the IOS onto a TFTP server Upgrade the router IOS from a TFTP server
Cisco Router Debug Commands Requirement Enable debug for RIP Enable summary IGRP debug information Enable detailed IGRP debug information Debug IPX RIP Debug IPX SAP Enable debug for CHAP or PAP Switch all debugging off Cisco Command debug ip rip debug ip igrp events
debug ipx routing activity debug IPX SAP debug ppp authentication no debug all undebug all