Professional Documents
Culture Documents
One (1) SwitchLinc On/Off Switch (Dual-Band) (#2477S) Two (2) SwitchLinc Dimmers (Dual-Band) (#2477D) One (1) SmartLinc Central Controller (#2412N)
INSTEON is a simple, reliable, and affordable breakthrough in home control. Simple - INSTEON uses Plug-nTap installation and programming that takes only minutes to setup. Reliable - every INSTEON device is a 2-way repeater, using existing power line wiring as well as radio frequency for communication. Affordable - INSTEON home automation products are priced at just a fraction of comparable systems. A home with INSTEON automation grows in value with every device you add, and truly makes life more convenient, safe and fun.
Installation
1) Install the SwitchLinc On/Off (Dual-Band) Switch, referencing the Quick-Start Guide provided with that device 2) Install each SwitchLinc Dimmer (Dual-Band), referencing the Quick-Start Guide provided with that device 3) Use the SwitchLinc Dimmer (Dual-Band) Quick-Start Guide to test that the devices are bridging the phases in your home 4) Install the SmartLinc Central Controller, referencing the Quick-Start Guide provided with that device 5) Follow the Linking instructions in the SmartLinc and/or SwitchLinc Quick-Start Guides to begin setting up your new automation system. Each Quick-Start Guide contains the simple steps needed to set up each product as a Controller, Responder, or both!
To find more information about home automation with INSTEON devices, visit: www.smarthome.com/LearningCenter.html
2490C2 Rev. 10/2/2012 5:24 PM / See Owners Manual for Warranty Information. Protected under U.S. and foreign patents (see www.insteon.com) Copyright 2012 INSTEON, 16542 Millikan Ave., Irvine, CA 92606, 800-762-7845