Professional Documents
Culture Documents
Actix Analyzer Getting Started Guide June 2010
Actix Analyzer Getting Started Guide June 2010
Guide
June 2010
The content of this manual is provided for information only, is subject to change without notice, and should not be construed as a commitment by Actix. Actix assumes no responsibility or liability for any errors or inaccuracies that appear in this documentation. Copyright Actix 2010. All rights reserved. All trademarks are hereby acknowledged.
www.actix.com
Contents
1 GETTING STARTED WITH ACTIX ANALYZER..................................................5
1.1 ABOUT THIS GUIDE ................................................................................5 1.2 INTRODUCING ACTIX ANALYZER .................................................................5 1.3 LEARNING ABOUT ANALYZER .....................................................................6 1.4 USE THE ONLINE HELP .............................................................................7 1.5 CUSTOMER SUPPORT ..............................................................................8
3.2 MODIFYING THRESHOLD VALUES FOR DETECTING EVENTS ................................. 20 3.3 CONFIGURING HOW DATA IS AGGREGATED ................................................... 20 3.4 CONFIGURING MAPS ............................................................................. 22
3.4.1 3.4.2 3.4.3 3.4.4 3.4.5
3.3.1 Change the binning method ................................................................... 21 3.3.2 Specify the message filtering method used when loading data ................... 21 Set up map backgrounds and layers ....................................................... 22 Change labels for a map layer ................................................................ 23 Change how a map layer is displayed ..................................................... 25 Show Lines to Cells on a map ................................................................ 25 Change the size of cell sectors ............................................................... 27
4.3 SELECTING ANALYSIS OPTIONS ................................................................ 32 4.4 VIEWING SUMMARY DATA FROM STREAMS .................................................... 33
4.4.1 4.4.2 4.4.3 4.4.4 4.5.1 4.5.2 4.5.3 4.5.4 4.5.5 4.5.6 4.5.7
Investigate streams .............................................................................. 33 View data using solution reports ............................................................. 33 View data using the Message Browser ..................................................... 35 View data using the Protocol Stack Browser ............................................. 36
4.6 INTEGRATING REVERSE/FORWARD LINK (UPLINK/DOWNLINK) DATA ..................... 46 4.7 CREATING AND USING QUERIES ................................................................ 47
www.actix.com
View data in a Map ............................................................................... 37 Replay the data .................................................................................... 39 View data in a Form .............................................................................. 40 View data in a Chart ............................................................................. 42 View data in a Table ............................................................................. 44 View data in a Workbook ....................................................................... 44 About synchronized data windows .......................................................... 45
4.8 GENERATING NEW REPORTS .................................................................... 50 4.9 LOADING LARGE AMOUNTS OF DATA WITH REPOSITORY MANAGER ....................... 52
4.9.1 4.9.2 4.9.3 4.9.4 4.9.5 4.9.6 4.9.7
Create a new Repository ....................................................................... 53 Open a Repository ................................................................................ 54 Load data into a Repository ................................................................... 55 Display the list of files loaded in a Repository ........................................... 56 Close a Repository ................................................................................ 56 Delete a Repository .............................................................................. 57 Manage Repository templates ................................................................ 57
INDEX ............................................................................................ 65
www.actix.com
www.actix.com
The platform for Actix Solutions, Analyzer, can load network performance data from many different sources:
These data sources could include field-test equipment and switch call traces, and could be from a one-off test, or part of a planned series of samples to build up an image of overall network performance. Once the data is loaded, a variety of analysis tools and displays provide a clear view of network performance for engineers, technicians or operations management staff.
www.actix.com
The Index tab lets you find any index entries that match a word or part of the word you are looking for. As you type, the list of matching topics changes. Select the desired topic and click Display to view it.
The Search tab lets you type in the word or words to search for, and then click List Topics. All matching topics are then listed. Select the desired topic and click Display to view it.
If you need to refer to a help topic often, you may want to add it to your 'favorites' list. Click on the Favorites tab, and click Add to add the displayed topic to the list. Select a topic from the list and click Display to view it.
www.actix.com
Analyzer can also display context-sensitive reference help for attributes displayed in the Attribute Explorer window on the left of the Analyzer interface right click on the attribute and select the option Display in Attribute Help.
You can also, from the Help menu, select Attribute Help. As you select an attribute in the Attribute Explorer, related extra information is displayed in the help window. As Actix is committed to provide rapid support for new file formats, this reference help may not be up to date. If there are particular attributes you would like to see in the help but are not currently documented, please contact MyActix.
www.actix.com
All users within a customer of Actix products are encouraged to register, and any user can submit a case. All cases submitted by users at the same customer are visible to each other. A customer cannot see other customers cases. Help is available on how to use MyActix when you log on. There is an RSS feed available to keep up to date with new resources being posted to the portal. It is also possible to access the Actix Support Service by other means such as email and telephone, but these methods are not preferred. It is more efficient and effective to submit a case via www.myactix.com to provide all necessary information to recreate the Customers case, which can then be investigated. Once an issue has been received by the Support Desk and logged onto the system, it is considered open until a solution has been implemented to the mutual satisfaction of both Actix and yourself. At this point, the issue can be considered closed. However, if no response within 2 weeks is received from the Customer to requests to progress the resolution of a case, then the case will be closed. The Customer will normally be sent email reminders that a case needs attention. A closed case can be re-opened upon request. www.myactix.com is available 24 hours a day apart from occasional essential maintenance. The Actix Support Service is provided on a regional basis and engineers will be working on your case during the local business hours of 09:00 to 17:00 Monday to Friday excluding local public holidays. Full details on Actix Support are available in the Actix Product Support Description document.
www.actix.com
or from the All Programs, Actix, Actix Software menu option. After a short pause, you will see the Actix loading screen:
www.actix.com
After starting your Actix Solution, choose how you want to proceed by selecting an engineering process. If you only have one engineering process on your license, you will bypass this screen and go straight to the entry screen for that process. Most engineering processes guide you through a series of predefined analyses and reports that encapsulate sophisticated radio engineering decision-making knowledge. However, Analyzer Classic lets you use Analyzer in free analysis mode that is, you can use Analyzers comprehensive set of data-analysis tools to investigate any message or attribute of interest within your logged data. This guide is concerned with how to use these tools, on the principle that once you understand how these tools work, the use of the other engineering processes will appear very straightforward. Checking the box at the bottom of the screen also lets you bypass this screen and go straight to your selected engineering process. If in future, you want to display this screen, from the File menu select Start New Engineering Process.
The selected engineering process will not work correctly until you have configured Analyzer. See the next section for details.
www.actix.com
Configuring Analyzer 12
3 Configuring Analyzer
Before you can use Analyzer or Spotlight to analyze network performance data, you must complete a series of tasks to allow the software to operate correctly. These tasks are described in this section.
www.actix.com
Configuring Analyzer 13
Follow these guidelines for best results: Analyzer does not require the data fields to be listed in a particular order in the text import file. The Site ID field must contain a unique value for each site location. Beware of nonunique Site IDs that is, entries that have multiple sets of latitudes and longitudes for the same Site ID. Non-unique Site IDs will result in Analyzer displaying site markers on the map without sector wedges. Site Names do not need to be unique they are only for display purposes. Position information must be accurate for Analyzer to show sites in the correct location on the map. Longitudes that have a West notation should be represented as a negative decimal, as should latitudes with a South notation. If the latitude and longitude fields are transposed, sites will appear skewed on the map. The parameters listed in these tables under the Imported Parameter columns are required for cell data to function interactively with logged data in the main Analyzer workspace, and within Spotlight. Analyzer Group indicates whether the parameter data relates to the site or to an individual cell. Analyzer Name is the name used by Analyzer and Spotlight to indicate this type of network information.
CDMA parameters are shown below, but parameters for other technologies are listed at the end of this document. Imported Parameter Site Name Site Number Latitude Longitude Sector Number Analyzer Group CDMA_Site CDMA_Site CDMA_Site CDMA_Site CDMA_Cell Analyzer Name SiteName SiteID SiteLatitude SiteLongitude Sector ID Can be 1,2,3 etc. or a combination of site numbers Azimuth Beamwidth Purpose Text description of the Site for display on map. Numeric identifier for the Site. Locates Site icons on the map. Locates Site icons on the map. Sector-specific information useful for display on maps.
Azimuth Beamwidth
CDMA_Cell CDMA_Cell
Orients the sector icons on the map. Governs the shape of the sector 'wedge' on the map to reflect the beamwidth of the antenna deployed at the site. Used in CDMA Toolkit calculations, lines to neighbor cells and to color sectors/sites on maps to reflect PN planning. Base station power, used in CDMA Toolkit calculations. Mobile Country Code. For information only.
PN Offset
CDMA_Cell
PN
CDMA_Cell CDMA_Cell
EIRP MCC
www.actix.com
Configuring Analyzer 14
Imported Parameter System Identity* Network Identity* Broadcast Identity* PctPilot* PctTraffic* PctPaging* PctSync* Active Set Search Window Setting* Neighbor Set Search Setting* List of neighbors*
Analyzer Group CDMA_Cell CDMA_Cell CDMA_Cell CDMA_Cell CDMA_Cell CDMA_Cell CDMA_Cell CDMA_Cell
Analyzer Name SID NID BID PctPilot PctTraffic PctPaging PctSync SRCH_WIN_A
Purpose For information only. For information only. For information only. For information only. For information only. For information only. For information only. Used in Analyzers CDMA Toolkit calculations to compare current search window settings with those suggested by Analyzer. Used in Analyzers CDMA Toolkit calculations to compare current search window settings with those suggested by Analyzer. Used in Analyzers CDMA Toolkit calculations to compare current search window settings with those suggested by Analyzer. Used to color sectors on the map by a custom integer field. Used to color sectors on the map by a custom integer field. Used to color sectors on the map by a custom integer field. Text that specifies which cell layer (for example, by technology, band, purpose or status) that the site belongs to. Used for multiple cell layers.
CDMA_Cell
SRCH_WIN_N
CDMA_Cell
CDMANeighborList
Sector Display Wildcard* Sector Display Wildcard* Sector Display Wildcard* Layer type*
*Optional.
Before importing new cell data into Analyzer, you need to ensure that Analyzer is pointing to a valid cell site database. Every Analyzer installation comes with a clean file called cellrefs.txt, located in the following folder: C:\Documents and Settings\All Users\Application Data\Actix\Analyzer\Bin\CellRefs\cellrefs.txt The file does not need to retain this name, and in fact, we recommend that you change it to something more meaningful, which will prevent the file from being overwritten during reinstallation. Whatever name you give it, this file is referred to throughout Analyzer as the cellrefs file.
www.actix.com
Configuring Analyzer 15
To be a valid cellrefs file, the first line must contain the following: ;#NetworkData datafile If you import the file using the Network Explorer, this first line is added automatically.
On the toolbar, select Import, then Import From New Template. For future cell site data imports, you can use the Import From Template option.
The Select Data File to Import dialog opens. Select the appropriate cell site data text file (usually an export data file from your planning tool). Ensure that the data is suitably formatted, as described in the previous section.
www.actix.com
Configuring Analyzer 16
5 6
Give the Template a meaningful Template Name ('My CDMA Cell Plan Template' in this example). Check the appropriate Delimiter that separates the data from the file into different columns. As you select different delimiters, you will see the effect in the Data Preview window at the bottom of the dialog. For example, under Delimiters, check the Tab box. Under General Settings, for Ignore header rows enter 1. For Array (list) Separator enter ;. If your file has more than one header or uses a different array list separator, set these options accordingly.
In most cases, the default information under General Settings and Coordinate Information will apply. If your file has more than one header or uses a different array list separator (the character used to separate the array values under the 'Neighbors' column in the example for step 1), adjust these settings as necessary. Examine your original text file to check that you are using the correct General Settings! Most cell site data import problems occur because these have been set wrongly.
www.actix.com
Configuring Analyzer 17
Click Next to display the Column Settings page of the Custom Import Wizard is now displayed, which allows you to associate a network parameter with a column of data in the text file.
Each of the field names has an associated icon: Key fields Required fields Other fields 9 You must select a field type for this field, but you cannot set a default value. These must be either bound to a particular type or have a default value set. Binding particular field types or setting default values is not strictly necessary for this field.
Open up the CDMA_Site node. Next to the Site_Name parameter, click in the Column field. Select the parameter name from your site database that corresponds to the Site_Name parameter. A description of each of these CDMA parameters and their use is given on page 12. Parameters for other technologies are given on page 59.
www.actix.com
Configuring Analyzer 18
11 Open the CDMA_Cell node. Next to Sector_ID, click in the Column field. Select the parameter name from your site database that corresponds to the Sector_ID parameter. You can enter a default value that takes effect if the actual value is unknown. For example, all Beamwidths could be set to 65 degrees. 12 Repeat for each of the fields in the CDMA_Cell node. 13 Click Finish when all the columns have been assigned. The new cell information will be added at the bottom of the existing list in the Network Element editor. When the cellrefs file is updated, you should use the template you have created on the new file so that you do not have to repeat work you have already done, including the column-by-column parameter assignment. 14 Inspect the cell data in the Network Explorer by expanding the All_<tech>_Site_Elements folder in the left-hand pane of the Network Explorer. 15 Double-click on any site name in the right hand pane. The Name, ID, latitude and longitude of the site will appear, as well as a folder containing <tech> Cell Elements. Drill into the <tech> Cell Elements folder and examine the values corresponding to each sector. 16 To keep the formatted site information, click Save. 17 Close the Network Explorer window by clicking the 'X' at the upper right hand corner. 18 The window shown below is now displayed. Click Yes to overwrite the old settings ('No' would append this information to your existing network data):
www.actix.com
Configuring Analyzer 19
Click on CellRefs > File Location to select the text file containing imported network element data. This file must be in the Actix 'cellrefs' format. The information from this cellrefs file takes effect from the next time a new workspace is created. Note that you can set up an automatic cellrefs import if your network data is liable to change frequently. The Automatic Import feature will not work with Spotlight.
Click OK to close the Preferences dialog. Network performance data is loaded and reports generated based on the cellrefs data file selected at the time. If you change the cellrefs file in a worksession, to consider the new cell site data, you will need to reload the performance data.
www.actix.com
Configuring Analyzer 20
The diagram above looks at a one-second bin. The speed of travel during logging will affect how many log files you see in a certain area.
www.actix.com
Configuring Analyzer 21
Distance binning combines data into bins corresponding to the distance traveled by the test mobile.
This mode is commonly used for drive-test analyses when viewing on a map to ensure plot points are evenly spaced. Message binning - If the number of messages to be averaged is set to 1, each message is placed into its own bin with the net result of no averaging of the data. Note that message binning should be usually only set to 1. Location binning is like overlaying a spatial grid on top of the data with a user-definable granularity. This can be used when examining several drive files crossing over the same geographic area. This method is often used for superstreams (see the online help for more information).
Drive Routes
All points in this box will be binned together to produce one plotted point.
3.3.2 Specify the message filtering method used when loading data
By default, Analyzer filters out statistically unimportant message information to shorten load times and increase the number of files that can be loaded at the same time. You can, however, turn off the message filtering and load every message contained in the data, but note that this will increase data loading time. To load all messages in the data 1 2 From the Tools menu, select Preferences to open the Preferences dialog. Under the heading General Settings > Load Speed Default, select Load All. The default value is Load Time Message Filtering (fast). 3 Click OK to accept the changes.
www.actix.com
Configuring Analyzer 22
All layers in the map from top to bottom, with the top layer currently selected
Making a checkmark in a layer's box determines the following: if the layer is visible if objects on it can be selected if the layer can be annotated (to 'lock' the Annotations layer from having any further annotations added, click on the box again to clear it) 4 5 In the Layers box, click Add to open the Open Layer dialog. Select one or more MapInfo Map (.tab) files. MapInfo layers are named according to the geographic location of the data (for example, the abbreviated US state name and/or county name), and by the type of data contained in the file. Here are some of the common abbreviations used for MapInfo data types: Suffix Y1 Y2 Layer Type RtHwy010_Top RtHwy010_Bot
www.actix.com
Configuring Analyzer 23
Suffix X1 X2 Pc Pn Pm R H S Wr Wb Lm Cb Mc Cy
Layer Type IntShld010 IntShld1040 Cultural Points Natural Points Municipal Points Railroads Highways Streets Water (rivers) Water (bodies of water) Landmarks City Boundary Minor Civic Division County
The top of the layer list represents the uppermost layer in this map window. 7 8 Click Up and Down to move 'examplemap' to the bottom and 'Annotations' to the top. Click Close and return to the map view. In a new Actix installation, the map location defaults to 0 longitude, 0 latitude, so you will need to arrange the map view to display the new map. 9 Pan the map viewing area by right-clicking in the map area, then choosing Zoom, Go to Layer and selecting the new map layer.
10 Use the Zoom and Pan controls to arrange the map as required. To zoom in to an area, click Zoom In, then click and drag a rectangle around the area of interest.
Configuring Analyzer 24
2 3
Select a particular layer. Click the Labels button to open the Label Properties dialog:
Do this Select the data field to be displayed as the label. Set the formatted field to be used as the label displayed, depending on the layer selected in the Layer Control dialog. To display labels on the map (which are otherwise hidden to improve map load times), check the box. To allow labels to overlap, check the box. To allow the same text to appear for adjacent data points, clear the box . To display labels only within the maximum and minimum zoom levels, check the box. A zoom level is the width of the map area displayed, in the current map units. Set the lowest zoom level at which labels will be displayed. Set the highest zoom level at which labels will be displayed. Set the maximum number of labels that can be shown on the map. Set the font style for the label.
www.actix.com
Show
Allow overlapped text Hide adjacent duplicate text Display within range
Configuring Analyzer 25
Do this Select the position of the label relative to the data point. Set the offset of the label in the X or Y direction. The offset is measured in points (as used for fonts). Defines the appearance of the label text in terms of color, font, size and other effects.
Label Style
Check Display within Zoom range and enter '0' for Min Zoom and '10' for Max Zoom.
www.actix.com
Configuring Analyzer 26
4 5
Set the Lines draw mode to 'Selection'. Set Color lines with to the following attribute: Technology CDMA GSM iDEN IS_136 UMTS Attribute PN_1stBestEcIo ServBCCH Channel FACCH_CurChannel Uu_ActiveSet_SC
6 7 8
Check that the Disable box is empty, and click OK, then Yes. Click OK to close the Layer Control dialog. Zoom In on data points near a cell site, and use Select to pick a data point. A solid line is drawn to the serving cell site, with dotted lines drawn to neighboring cells. If 'All datapoints' was selected in the Lines Configuration dialog, you would not need to select a data pointall data points would have a line to their neighbor cells. This can be useful in some situations.
www.actix.com
Configuring Analyzer 27
Set the cells to be labeled by an appropriate parameter for the technology (for example, SC for UMTS). You may want to change the size of cell site sectors as displayed on a map. This is especially useful if you are using multiple cell layers. 1 2 3 From the map window, click on Cell Sites to open the Sites/Cell Properties dialog. Set the Series attribute to be <tech>_Cell, for example CDMA_Cell, or WCDMA_Cell. Set the Cell Size to an attribute shared by all related cell sites, such as Layer_type (recommended if available from your cellrefs file) or MCC, and click OK to display the new layer in the Legend panel on the left. Expand the new layer to show one item in the range, called 'Unspecified'. Right-click on this item and choose Selected range's style to open the Style chooser dialog. Set the new font size as required and click OK. The cell site sectors will now change size to reflect your selection.
www.actix.com
4 5 6
Key: 1 The main menu and toolbar provide the full range of commands. To toggle the interface between using buttons alone and buttons with text, select: Tools > Preferences > General Settings > Use Small Toolbars. The Attribute Explorer panel shows all logfiles, repositories and dataset operations. The Replay control lets you step through logfile data. Various data views can be opened in this area. This area reports on any filters in operation and the type of data binning being used. The arrangement of loaded help files and data display windows is called the current workspace. You can save and reuse workspaces as necessary to use as templates for future worksessions. Saving a workspace to your desktop allows you to start the application with your preferred layout with a double click.
2 3 4 5
www.actix.com
An attribute
Click on the symbols to open out and explore the data in your logfile. See how your data relates to the structure shown above. The only objects that you actually need to recognize are filenames, data streams and data attributes. In the example above, the file 'MyFile1' contains a data stream called 'Qualcomm MDM 1900' (the number is the data stream number within the file, starting from zero). The 'CDMA' group contains the 'Pilot Sets' set, which contains the 'SearcherMaxEnergy' data attribute.
www.actix.com
The logical tree-view layout of the Attribute Explorer allows you to drill down and identify all logged data. Once you have located the appropriate data attribute, you can open it in a data windowfor example, a map, chart, table or spreadsheetto examine the data in detail. You can examine data streams using the Message Browser tool. Searching for an attribute You may find it easier to locate attributes using the Find Attribute command, which lets you enter all or part of the attribute's name or help description in a new Attribute Search dialog. Select Tools, Find Attribute (or use the hotkey Ctrl + Shift + F) to add a search panel is added to the Attribute Explorer tree view pane.
Enter search criteria about the required attributes into this panel. Find What: Enter some characters that form part of the required attribute name. Stream: Select which stream of data should be searched. <All Streams> is set by default. Settings: Whole Word: Check this to search only for attributes where the search text exactly matches the whole attribute name. Otherwise, search for attributes where the search text is contained within the attribute name. Case Sensitive: Check this to search only for attributes where the case of the search string exactly matches the case of the attribute.
Direction: When down is selected, only search for attributes further down in the attribute tree from the currently selected attribute. When up is selected, only search for attributes further up in the attribute tree from the currently selected attribute.
www.actix.com
Find Next: Based on the current search criteria, find the next matching attribute. This attribute is highlighted in the All tab at the bottom of the Attribute Explorer. Find All: Based on the current search criteria, find all matching attributes in the tree-view. The matching attributes are listed in the Search Results tab at the bottom of the Attribute Explorer.
Done: The search for attribute panel is closed. Search results remain visible in the Search Results tab.
www.actix.com
Most common features can be accessed in this way. Stream analysis options are described in the section Viewing summary data below. Queries have a different set of options:
www.actix.com
To open an application pack 1 2 Ensure that you have a data file loaded and that a valid cellrefs file has been set. From the Analysis menu, select an application pack (in this example, 'CDMA Distant Server Analysis'). Once you select an application pack, this window opens:
The top pane shows a tree-view of the network structure against various statistics produced by the application pack. 3 Use the top pane as necessary to narrow down the data in your selection. All reports appropriate to your selection are displayed under the Suggested tab. If you want to use another report, look under the All tab to view all reports available within the current application pack. A description of the reports contained within each application pack is also provided in this window. 4 5 Double-click on a report icon to open the report window. This will report on all data selected in the upper tree-view panel. As required, use the buttons at the bottom of the window to Save the report as a web-compatible HTML file set, Print the report to your printer or open the report in Excel using Show Excel Report.
To reset thresholds for a new analysis A number of the application pack reports use Custom Attributes. To change the thresholds for a new analysis, you need to re-run these Custom Attributes directly from the Custom Attribute Manager: Distance_Input EcIo_Threshold_Input You can now re-run the application pack.
www.actix.com
The Message Browser combines an event panel (sequentially listing call events) with a panel of Layer 3 messaging, allowing you to pinpoint the root causes of problems.
www.actix.com
Now select the required browser view. Each view displays messaging and information appropriate to that view. The example shown here is the CDMA Signaling (Radio Interface) view.
www.actix.com
Select one of the display methods to open the appropriate data display window.
If the title of a particular series is too long to see easily in the legend pane, right click on the series name and select Multipath from the options to split the name over two lines. The legend panel shows the how the various colors used relate to values for the particular attribute. The number in parentheses is the number of binned data points for that value range that occurs in the logged data, followed by the percentage of the total number of binned data points.
www.actix.com
If there are no other attribute layers on this map, the new attribute layer will be beneath the lowest site or cell layer. See the chapter Configuring Analyzer for more information on map layers. 2 3 4 5 Click on the Pan button. Click and drag the data around the map window. Experiment with the Zoom buttons. In the Attribute Explorer, open the 'Event Data' set and drag an event type (in this example the Uu_CallDropped event) onto the map, which should then look similar to this:
Adding events to the mapped data can help you see where problems are occurring. 6 Drag another attribute onto the map. The attribute information is displayed on a new map layer directly above the previous attribute layer. You can also change the size, symbol or color of the data, apply offsets to an attribute or merge attributes for a multidimensional display. See the online help for further details. 7 To hide the data for an attribute, go to the legend pane and click in the check box beside the attribute name. To find out how to add background geographical and network information to map windows, see the chapter Configuring Analyzer.
www.actix.com
To move through the messages by one message at a time, click on a Step button:
Several clicks may be required before any change is visible on the Map, depending on the binning settings. To move through each message at a set speed, click a Play button:
This will move through the data at a multiple of real-time speed set using the slider (if the Play by Time option is selected see below). The Select Options button allows you to set the replay mode: Mode Play by Time Play Replays message at the same rate as originally recorded. Some messages will be ignored to maintain the replay speed. Replay all messages. The speed slider has no effect. Replays bin-to-bin in sequence. The speed slider has no effect. Step Step to next message.
www.actix.com
The Form window now displays a variety of attributes based on the data point you selected. Here is an example:
You can synchronize all views in other open data windows by clicking on the timeline in Navigator-type StateForms like this.
www.actix.com
Other StateForms provide information for the currently selected point in the drive test:
3 4 5
If you have scanner data in your logfile, start another Form window. Right-click on the form and select Open File, then select a form (.axw) file for a scanner. Right-click on the form and select Stream Selector, then the scanner stream.
See the online help for details on how to create your own forms.
www.actix.com
To display an attribute in an existing chart You can display more than one attribute on the same chart. Select a second attribute that would make a useful comparison (in this example, the attribute 'ForwardFER') and drag it onto the existing chart.
www.actix.com
To zoom into a chart You can zoom into selected areas of the chart by defining a frame for the zoom. 1 On the chart, click the upper left corner of the zooming rectangle, and drag down to the lower right extent of the rectangle.
Note that the zoom only operates in the X-axis, not in the Y-axis. 3 Now return the chart its original state by dragging a box anywhere, but this time starting from the bottom.
To pan and scroll around the chart Put the cursor within the chart window, hold the right mouse button down and drag the cursor around to pan and scroll around the chart window. Although you can scroll in the X-axis for all attributes on the chart, you can only pan in the Y-axis for the last attribute to be displayed on the chart.
www.actix.com
www.actix.com
www.actix.com
5 6
7 8 9
10 From the attribute picker, select for example 'PN_Primary'. 11 Click OK. The superstream is now generated and appears in the Attribute Explorer. You can view data from the superstream in any of the standard data display windows.
www.actix.com
The Filter Wizard opens. 2 Enter 'Poor Quality' as the name of the filter.
www.actix.com
Click on the right-arrow of the attribute picker and select, for example, CDMA > DownLink Measurements > ForwardFER.
4 5
Set the filter operation to 'Greater than (>)'. Set the threshold to '5'.
www.actix.com
Example UMTS filter definitions are shown below: Poor Mobile Receive Power High Mobile Transmit Power Low Mobile Transmit Power High Mobile Receive Power Poor Ec/No High Ec/No CPICH_RSCP_in_ActiveSet[0] < -95 dBm UeTransmittedPower > 0 dBm UeTransmittedPower < -30 dBm CPICH_RSCP_in_ActiveSet[0] > -80 dBm CPICH_EcNo_in_ActiveSet[0] < -15 dB CPICH_EcNo_in_ActiveSet[0] > -8 dB
www.actix.com
2 3
Click Open. Select the data source that you want to view in the workbook report.
www.actix.com
You can proceed to adapt the workbook, use other Excel tools on the data, and so on.
www.actix.com
www.actix.com
Beneath each device in the Attribute Explorer, you can see the attributes and queries that are part of that device. The structure of the devices and their attributes, queries, and filters are defined by the template that was used to create the repository and cannot be changed after the repository has been created. Sometimes each device might have a different list of attributes and queries and sometimes some or all of the devices might have the same lists. When you right-click an attribute or binned query in the Attribute Explorer, you get options to display it on the Map and other binned data viewing components and to see its definition in the Attribute Help system. When you right-click a crosstab or event query in the Attribute Explorer, you have the option to open the Repository Statistics Explorer, which provides useful features for exploring the summary views that the crosstab queries provide.
Typically, an engineering process module that uses Repository Manager will retrieve crosstab data from the repository and display it in a table or chart embedded on the task page.
www.actix.com
2 3
Select the Template on which you want to base the repository and enter a Name and Description. Do one of the following: Click Create & Open, if you want to open the new repository after it has been created. Click Create, if you do not want to open the new repository immediately after it is created.
Select the repository you want to open and then click OK.
www.actix.com
Locate the repository in the Open Repositories folder in the Attribute Explorer. Right-click the repository and from the shortcut menu, choose Load Data. This opens the Load Data dialog. This has features that make it easy to select individual files to load, and also to select multiple files based on their location and file names.
Use the Add Files button to select individual log files to load. When you select a file, it is automatically added to the list of files in the center of the Load Data dialog box. Use the Add Folders button to select folders that contain log files to load. Selecting a folder automatically selects all of the files in that folder and all of its subfolders and adds them to the list of files in the Load Data dialog box. You can remove files from the list by selecting them individually or in groups (using Shift-click and Ctrl-click) and then clicking Remove. You can also remove files from the list by entering an expression into the Filter dialog box and then clicking Apply. This removes from the list all of the files that do not meet the filter expression. The expression should use a combination of text and wildcard characters to specify the name patterns of the log files that you want to include. You can include multiple patterns using the semicolon (;) character. The following table provides details of the valid wildcard characters. Wildcard * ? Description Matches zero or more characters. Matches a single character.
www.actix.com
6 7
The next table contains some examples. Example *.log;*Friday*.sd5 Selects All files that have a .log filename extension and all log files whose names contain the text "Friday" and that have an .sd5 filename extension. Only files that have a .dat filename extension and whose names contain the characters "08-" followed by any two characters and then followed by the characters "-2004". In practice this could be used to select files whose names contain any date in August 2004 specified in the American short date style.
*08-??-2004*.dat
Clicking the Apply button applies the expression to the files listed in the box above. Note that clearing the expression and clicking Apply again does not cancel any filtering that was applied earlier. 8 Notes: Repository Manager does not reload files that are already in the repository. Repository Manager will try to load all files in the list, but if any files cannot be loaded, Repository Manager will simply move on to the next file. When the file loading process has finished, Repository Manager shows a list of each file loading attempt. A result of OK means only that the log file was successfully processed, but does not necessarily mean that any data was loaded into the repository. For example, a log file might show as OK although none of its data loaded into the repository because it did not meet any of the loading criteria defined for the devices, or if it did, the log file did not actually contain any of the attributes defined for those devices nor any data that matched the queries. See Repository Template Wizard: Define Devices in the online help for more information. When the list reflects the files that you want to load, click OK to start the loading process.
www.actix.com
To create a new template 1 2 Open the Template Manager and then click New. This opens the Repository Template wizard's Welcome page. Click Next to open the Combine or Separate Data? page.
www.actix.com
To edit an existing template Open the Template Manager, select the template you want to change, and then click Edit. This takes you straight to the Combine or Separate Data? page. To delete an unwanted template Open the Template Manager, select the template you want to delete, and then click Delete. Note that you cannot delete templates that are supplied by Actix, or that are within a package. See the online help for more information.
www.actix.com
Azimuth Beamwidth
CDMA_Cell CDMA_Cell
Orients the sector icons on the map. Governs the shape of the sector 'wedge' on the map to reflect the beamwidth of the antenna deployed at the site. Used in CDMA Toolkit calculations, lines to neighbor cells and to color sectors/sites on maps to reflect PN planning. Base station power, used in CDMA Toolkit calculations. Mobile Country Code. For information only. For information only. For information only. For information only. For information only. For information only. For information only. For information only. Used in Analyzers CDMA Toolkit calculations to compare current search window settings with those suggested by Analyzer.
PN Offset
CDMA_Cell
PN
Base Station Power* Mobile Country Code* System Identity* Network Identity* Broadcast Identity* PctPilot* PctTraffic* PctPaging* PctSync* Active Set Search Window Setting*
CDMA_Cell CDMA_Cell
EIRP MCC
www.actix.com
Purpose Used in Analyzers CDMA Toolkit calculations to compare current search window settings with those suggested by Analyzer. Used in Analyzers CDMA Toolkit calculations to compare current search window settings with those suggested by Analyzer. Used to color sectors on the map by a custom integer field. Used to color sectors on the map by a custom integer field. Used to color sectors on the map by a custom integer field. Text that specifies which cell layer (for example, by technology, band, purpose or status) that the site belongs to. Used for multiple cell layers.
CDMA_Cell
CDMANeighborList
Sector Display Wildcard* Sector Display Wildcard* Sector Display Wildcard* Layer type*
*Optional.
Latitude Longitude SectorID Can be 1,2,3, etc, or a combination of site numbers Azimuth Beamwith
Azimuth Beamwidth
GSM_Cell GSM_Cell
Orients the sector icons on the map. Governs the radius of the sector 'wedge' icon to reflect the beamwidth of antenna deployed at the sector. Base Station Power. Broadcast Control Channel.
GSM_Cell GSM_Cell
EIRP BCCH
www.actix.com
Imported Parameter Mobile Network Code Mobile Color Code Location Area Code Cell ID value Base Station Identity Code Layer type
Purpose Mobile Network Code. Mobile Color Code. Location Area Code. Cell ID value. Base Station Identity Code, comprising of a concatenation of the NCC and BCC values. Text that specifies which cell layer (for example, by technology, band, purpose or status) that the site belongs to. Used for multiple cell layers.
GSM_Cell
Layer_type
iDEN
Imported Parameter Site Name Site Number Latitude Longitude Sector Number Analyzer Group IDEN_Site IDEN_Site IDEN_Site IDEN_Site IDEN_Cell Analyzer Name SiteName SiteID Latitude Longitude Sector ID Can use 1,2,3, etc, or a combination of site numbers Azimuth Beamwidth Purpose Text description of the Site for display on map. Numeric identifier for the Site. Locates Site icons on map. Locates Site icons on map. Sector-specific information useful for display on maps.
Azimuth Beamwidth
IDEN_Cell IDEN_Cell
Orients the sector icons on the map. Governs the shape of the sector 'wedge' icon to reflect the beamwidth of antenna deployed at the site. Base Station Power. Can be used to color the sector wedges. A list of color codes separated by semicolons. This list is designed to match the entries in the TCH_List field. Used for determining likely serving and neighbor cells.
IDEN_Cell IDEN_Cell
EIRP CCCH
IDEN_Cell
Color_Codes
www.actix.com
Imported Parameter Digital Control Channel Digital Voice Color Code Traffic Channel List
Purpose Digital Control Channel. Digital Voice Color Code. A list of traffic channels, separated by semicolons. This list is designed to match the entries in the Color_Codes field. Used for determining likely serving and neighbor cells. Mobile Country Code. Cell Identity. Text that specifies which cell layer (for example, by technology, band, purpose or status) that the site belongs to. Used for multiple cell layers.
MCC CI Layer_type
LTE
Imported Parameter Site Name Site Number Latitude Longitude Sector Number Analyzer Group LTE_Site LTE_Site LTE_Site LTE_Site LTE_Cell Analyzer Name Site_Name SiteID Latitude Longitude Sector_ID Purpose Text description of the Site for display on map. Numeric identifier for the site. Locates site icons on map. Locates site icons on map. Sector-specific information useful for display on maps (can be alpha or numeric) Orients the sector icons on the map. Governs the shape of the sector wedge icon to reflect the beamwidth of antenna deployed at the site. Equivalent Isotropic Radiated Power for informational purposes only.
Azimuth Beamwidth
LTE_Cell LTE_Cell
Azimuth Beamwidth
EIRP*
LTE_Cell
EIRP
www.actix.com
Imported Parameter Downlink EARFCN Layer1 Cell Identity MCC* MNC* * Optional.
Purpose The downlink EARFCN of the cell. This field and PCI must be present for lines to cells to work. The physical layer cell identity. This field and DL_EARFCN must be present for lines to cells to work. Mobile Country Code for informational purposes only. National Domain Code for informational purposes only.
LTE_Cell
PCI
LTE_Cell LTE_Cell
MCC MNC
UMTS / HSPA+
Imported Parameter Site Name Site Number Latitude Longitude Sector Number Azimuth Beamwidth Analyzer Group UMTS_Site UMTS_Site UMTS_Site UMTS_Site UMTS_Cell Analyzer Name SiteName SiteID Latitude Longitude Sector_ID Purpose Text description of the Site for display on map. Numeric identifier for the site. Locates site icons on map. Locates site icons on map. Sector-specific information useful for display on maps (can be alpha or numeric) Orients the sector icons on the map. Governs the shape of the sector wedge icon to reflect the beamwidth of antenna deployed at the site. Used for cell site identification and to calculate lines to cells. Equivalent Isotropic Radiated Power for informational purposes only. Mobile Country Code for informational purposes only. National Domain Code for informational purposes only. Location Area Code for informational purposes only. Cell Identity for informational purposes only.
UMTS_Cell UMTS_Cell
Azimuth Beamwidth
SC EIRP*
UMTS_Cell UMTS_Cell
SC EIRP
www.actix.com
Purpose Used to define a pre-defined neighbor list for each cell. Used during neighbor list recommendations analysis. Configurable text field that specifies which cell layer (for example, by technology, band or status) the site belongs to. Used for multiple cell layers.
Layer Type*
UMTS_Cell
LayerType
* Optional.
You now have a cellrefs file that can import data for both technologies.
www.actix.com
Index
A
Analysis Manager, 47 analysis options selecting, 32 Annotations, 23 application packs, 33 applications, 5 Attribute Explorer, 55 attribute help, 8 Attribute Spy, 33 attributes, 29 right-clicking on, 37 searching for, 30 geographical data, 22 GSM/GPRS cell site parameters, 60
H
help, context, 8 Histogram queries, 47 HSPA+ cell site parameters, 63
I
iDEN cell site parameters, 61 Index tab, online help, 7 integrating data files, 46 investigate streams, 33
B
Binned queries, 47 binning methods, 20
L
Layer 3 messaging, 35 Layer Control dialog, 22 Lines to Cells, 25 location binning, 21 LTE cell site parameters, 62
C
CDMA cell site parameters, 13, 59 cellrefs, 12, 14, 19, 27, 34 Contents tab, online help, 7 context help, 8 Create a New Filter, 47 Create Repository, 53 Crosstab queries, 47 Custom Attributes, 34
M
MapInfo data types, 22 message binning, 21 Message Browser, 30, 35 message filtering, 21 Microsoft Excel reports, 50 multidimensional display, 38
D
data attributes, 29 data integration, 46 data streams, 29 Delete Repository, 57 Display Attribute Spy, 33 Display Message Browser, 35 Display on Table, 44 Display on Workbook, 44 distance binning, 21
N
Network Explorer, 12, 27
O
online help, using the, 7 Open Logfile, 29 Open Repository, 54 Open Workbook, 50
E
EDGE cell site parameters, 60 engineering process, 11 Excel templates, 50
P
panning chart windows, 43 panning map windows, 38 Preferences dialog, 19, 21 Protocol Stack Browser, 36
F
Favorites tab, Attribute Explorer, 28 Favorites tab, online help, 7 filenames, 29 Filter queries, 47 Find Attribute, 30 Forms feature, 40
R
Replay feature, 39 reports, 50 Repository Manager, 52 Repository Template Wizard, 57 reverse and forward link data integration, 46 right-clicking on attributes, 37
G
generating reports, 50
www.actix.com
S
Search tab, online help, 7 searching for attributes, 30 setting the binning method, 21 Small Toolbars, Use, 28 solution reports, 33 starting Actix Software, 10 Statistical queries, 47 streams, 29 investigating, 33 summary data viewing, 33 superstreaming, 21, 46 synchronized data, 45
U
UMTS cell site parameters, 63 UMTS filters, 49 uplink/downlink data integration, 46 Use Small Toolbars, 28
V
viewing data in charts, 42 viewing data in maps, 37
W
workbook reports, 50 workbooks, using, 44 workspace, 28
T
tables, using, 44 Template Manager, 57 time-based binning, 20
Z
zooming chart windows, 43 zooming map windows, 38
www.actix.com
www.actix.com