Professional Documents
Culture Documents
APPLICABLE STANDARDS Shell Wall Thickness Face to Face Dimensions Flange Dimensions Pressure Testing
15
11C
ASME B 16.34 ASME B 16.10 ASME B 16.5 ASME B 16.34 ASME B16.34 API 598 (Optional)
Basic Design
13
11A
14
11
10 10 9
8
13B
13A
11A 11 12
10 10
16
6
1
13
16 16
9
8
7
6
3
2
5
1
13B
13A
1-1/2 - 2-1/2
5
13
12A
12
14A
6-8
3-8
PART NO. PART 1 Body QTY. MATERIAL 1 316 Stainless Steel Carbon Steel Alloy 20 Hastelloy C Monel 316 Stainless Steel Carbon Steel Alloy 20 Hastelloy C Monel TFM(Super TFE) TFE 316 Stainless Steel / Alloy 20 / Hastelloy C / Monel 17-4PH (Option) Reinforced TFE 304 Stainless Steel 13A 13B 14 14A 15 16 ASTM A351 CF8M ASTM A216 WCB ASTM A351 CN7M ASTM A494 Type CW-12MW ASTM A494 GR M35-1 ASTM A351 CF8M ASTM A216 WCB ASTM A351 CN7M ASTM A494 Type CW-12MW ASTM A494 GR M35-1 Monel TFE Reinforced TFE NOVA PART NO. PART 11A 11B 11C 12 12A 13 Lock Tab (1-1/2-4) Handle Nut (1-1/2-2) Lock Washer Stopper Snap Ring Handle 3-8 Lockable Handle Wrench Block Hex Head Bolt Locking Device (1-1/2-2) Gland Flange Sleeve Stop Pin (1-1/2-2) (2-1/2-4) QTY. MATERIAL 1 1 1 1 1 1 Stainless Steel 304 Stainless Steel 304 Stainless Steel (1-1/2-2) 304 Stainless Steel Stainless Steel (6-8) 304 Stainless Steel (1-1/2-2) Galvanized Steel (2-1/2-4) Stainless Steel (3-4) Ductile Iron (6-8) Stainless Steel 304 Stainless Steel 304 Stainless Steel 304 Stainless Steel Vinyl 304 Stainless Steel 304 Stainless Steel
End Connector
3 4 5 6 7 8 9 10 11
Ball Seat Body Seal Stem Thrust Bearing Stem Packing Gland Packing
1 2 1 1 2 1
1 1 1 1 1 1 2
Belleville Washer 2/4 304 Stainless Steel (1-4) Packing Nut (1-4) 1 304 Stainless Steel
*See Dimensions
SERIES 54 DIMENSIONS
1 - 2-1/2
3 - 4
6 - 8
CV* DATA
1 1-1/2 2 2-1/2 3 4 6 8 30 82 120 240 350 720 1020 1800 1 2
PORT
0.75 1.25 1.50 2.00 2.50 3.00 4.00 6.00 1-1/2 2-1/2 3 4 6 8
WEIGHT (lbs.)
1 1-1/2 2 2-1/2 3 4 6 8 7 16 17 26 34 56 122 184
*CV: The volume of water in gal./min. that will pass through a given valve with a pressure drop of 1 PSI.
N 4 4 4 4 4 8 8 8
H 3/8-24 UNF 9/16-18 UNF 9/16-18 UNF M20 1-14 UNS 1-14 UNS 1.64 1.64
The dimensions above are for information only, not for construction. For complete actuator mounting dimensions refer to Engineering Bulletin EB-2003.
1 - 4
6 - 8
1 - 4 STEM ARRANGEMENT
700
SST-CF8M
CLASS 300
600
Pressure (PSIG)
500
PTFE
400
RTFE
TFM
PEEK
300
CS-WCB
CLASS 150
SST-CF8M
200
NOVA
100
100
200
400
500
600
HOW TO ORDER
VALVE SIZE
1 1-1/2 2 3 2-1/2 4 6 8
VALVE SERIES
54
CLASS
150# = 11
ALLOY
4 = Carbon Steel 6 = Stainless Steel 2 = Alloy 20 3 = Monel 5 = Hastelloy C
SEATS
T = TFE R = Reinforced TFE N = NOVA M = TFMTM P = PEEK
OPTIONS
X = Oxygen Service OH = Oval Handle F= Fugitive Emissions F= Certified ANSI 593.00.01 E= Extended Stem L= Lockable Extended Stem D = Leak Detection Stem GO = Gear Operator 7= 17- 4PH Stem A= Nace
54
11
X
Toll-Free 1-877-7SHARPE
(877) 774-2773
Fax: (708) 562-9250 E-Mail: info@sharpevalves.com www.sharpevalves.com 1260 Garnet Drive Northlake, Illinois 60164 U.S.A.
Rev. 1/09
Due to continuous development of our product range we reserve the right to change the dimensions and information contained in the leaflet as required. TFM is a registered trademark of Dyneon, LLC.