Professional Documents
Culture Documents
I9100 Flashguide
I9100 Flashguide
Specification
2-1. GSM General Specification
WCDMA 210 0 WCDMA 190 0 WCDMA 900 WCMDA 850
PCS1900
82 4~8 49 86 9~8 94
88 0~9 15 92 5~9 60
1 71 0~ 1 78 5 1 80 5~ 1 88 0
1 85 0~ 1 91 0 1 93 0~ 1 99 0
1 92 2~ 1 97 7 2 11 2~ 2 16 7
1 85 2~ 1 90 7 1 93 2~ 1 98 7
88 0~9 15 92 5~9 60
82 4~8 49 86 9~8 94
12 8~2 51
0 ~ 12 4 & 97 5~10 23
51 2~8 85
51 2~8 10
UL: 2 71 2~ 2 86 3 DL: 2 93 7~ 3 08 8
UL: 4 13 2~ 4 23 3 DL: 4 35 7~ 4 45 8
T x/R x spacing
4 5MH z
4 5MH z
9 5MH z
8 0MH z
4 5MH z
4 5MH z
Mod . Bi t ra te/ B i t Pe ri o d
3.8 4Mc p s
3.8 4Mc p s
3.8 4Mc p s
3.8 4Mc p s
Time Slot P er i o d/ F r am e P er i o d
57 6.9 us 4.6 15 ms
57 6.9 us 4.6 15 ms
57 6.9 us 4.6 15 ms
57 6.9 us 4.6 15 ms
F r ame Le ng t F r ame Le ng t F r ame Le ng t F r ame Le ng t h: h: h: h: 1 0ms 1 0ms 1 0ms 1 0ms Sl otl en gth : Sl otl en gth : Sl otl en gth : Sl otl en gth : 0.6 67 ms 0.6 67 ms 0.6 67 ms 0.6 67 ms
Mo du l a ti o n
0 .3G MS K
0 .3G MS K
0 .3G MS K
0 .3G MS K
QP SK H QP S QP SK H QP S QP SK H QP S QP SK H QP S K K K K
MS P ower
2 4d Bm~ -5 0d Bm
2 4d Bm~ -5 0d Bm
2 4d Bm~ -5 0d Bm
2 4d Bm~ -5 0d Bm
Po we r Class
5p cl ~ 19 pcl
5pcl ~ 19pcl
0pcl ~ 15pcl
0pcl ~ 15pcl
3(max+24dB m)
3(max+24dB m)
3(max+24dB m)
3(max+24dB m)
S en s iti v i ty
-1 02 dB m
-1 02 dB m
-1 00 dB m
-1 00 dB m
- 10 6.7 dB m
- 10 6.7 dB m
- 10 6.7 dB m
- 10 6.7 dB m
TDMA Mux
C el l R ad i u s
3 5K m
3 5K m
2K m
2K m
2K m
2K m
2K m
2K m
2-1
Specification
PCS1900
312 dBm
1 2
292 dBm
272 dBm
3 4
252 dBm
10
232 dBm
10
5 6
11
212 dBm
11
12
192 dBm
12
7 8
13
172 dBm
13
14
152 dBm
14
9 10
15
132 dBm
15
16
113 dBm
16
11 12
17
93dBm
17
18
73 dBm
18
13 14
19
53 dBm
19
15
2-2
3-1
6. Level 1 Repair
6-1. S/W Download 6-1-1. Pre-requisite for S/W Downloading
Downloader Program (Odin3 v1.83.exe) GT-I9100 Mobile Phone Data Cable JIG BOX (GH99-36900A) JIG Cable (GH39-01339A) Adapter (GH99-38251A) Serial Cable Binary files Settings Connect to ANYWAY JIG BOX & JIG CABLE (Phone to JIG) Or PC to Phone Using Data Cable
6-1
Level 1 Repair
Load the binary download program by executing the "Odin3 v1.83.exe" Run this file.
1. Option Selection - Check Re-Partition, Auto Reboot and F. Reset Time, then select PIT, PDA, PHONE and CSC Files.
6-2
Level 1 Repair
2. Enter Device into Download Mode - Enter the device into Download Mode by pressing down on Volume Down button and OK button, and pressing down on Power ON/OFF Button.
3. Connect the Handset to PC via Data Cable. Make sure ID:COM box highlighted yellow that the Handset is connected to the PC.
6-3
Level 1 Repair
4. Start Downloading binary files by clicking Start Button. Then wait for "Pass" to be appear on the screen.
5. 6.
Disconnect the Handset to Data cable. Once the device boots up, confirm the downloaded version name and etc. : *#1234# Full Reset : *2767*3855#
6-4
9. Reference Abbreviate
Reference Abbreviate
AAC: Advanced Audio Coding. AVC : Advanced Video Coding. BER : Bit Error Rate BPSK: Binary Phase Shift Keying CA : Conditional Access CDM : Code Division Multiplexing C/I : Carrier to Interference DMB : Digital Multimedia Broadcasting EN : European Standard ES : Elementary Stream ETSI: European Telecommunications Standards Institute MPEG: Moving Picture Experts Group PN : Pseudo-random Noise PS : Pilot Symbol QPSK: Quadrature Phase Shift Keying RS : Reed-Solomon SI : Service Information TDM : Time Division Multiplexing TS : Transport Stream
9-1
1. Safety Precautions
1-1. Repair Precaution
Repair in shield box during detailed tuning. Take specially care of tuning or test because the specification of mobile phone is sensitive for surrounding interference(RF noise). Be careful to use a kind of magnetic object or tool because performance of parts is damaged by the influence of the magnetic force. Surely use a standard screwdriver when you disassemble this product. Use a thicken twisted wire when you measure level because a thicken twisted wire has low resistance. Repair after separate test pack and set because of short danger (for example an overcurrent and furious flames of parts etc) when you repair the board in condition of connecting Test Pack and tuning on. Take specially care of soldering iron because the board of the PCB is small and weak in heat. Surely tune on/off while using AC power plug because a repair of battery charger is dangerous when tuning ON/OFF PBA and Connector after disassembling the charger. Don't use the unauthorised materials except for the replacement registered on SEC System. Otherwise the engineer isn't charged with issues that you don't keep.
1-1
Safety Precautions
1-2