COMMERCIAL DEHUMIDIFIER

FRAL FDW62
62 LITRES PER DAY
The FDW62 dehumidifier is a purpose-built elegant but powerful dehumidifier ideal for corrosive environments including indoor heated pools, laboratories, etc. This dehumidifier is powder-coated inside and outside at the factory and receives an additional internal rust protection treatment before leaving our workshop. Not all dehumidifiers available in Australia are finished to this standard. The large volume of dry air this unit is capable of producing (600m/hr) ensures the area is kept at optimal humidity levels. This model can be fitted with a water pump to allow collected water to be pumped to a remote point very handy! Features: Pump can be fitted for lifting condensed water Two speed fan Digital control of humidity and defrost Digital display Protection IP22 (added protection for corrosive areas) Low noise Low power consumption Rotary compressor Power supply 220-240V 50Hz Price: $4500 (includes GST) Warranty: 3 years

CONDENSED WATER AT DIFFERENT AMBIENT TEMPERATURE AND HUMIDITY CONDITIONS

10C 60% 10 l/d 10C 80% 18 l/d 15C 60% 15 l/d 15C 80% 23 l/d 20C 60% 20 l/d 20C 80% 28 l/d 25C 60% 25 l/d 25C 80% 35 l/d 27C 65% 28 l/d 27C 80% 39 l/d 30C 80% 52 l/d 32C 90% 62 l/d

TECHNICAL DATA
Power Consumption (at 27C, 65% rh) Power Consumption (at 35C, 95% rh) Absorbed Current (at 35C, 95% rh) standard ver. Start Current Full Load Amp Air Flow Noise level (at 3 meters) Refrigerant Defrosting Control Continuous Drainage Pipe (male) Temperature Range standard version Relative Humidity Range Condensation Capacity (at 26C, 60% rh) Condensation Capacity (at 32C, 90% rh) Weight Dimensions 700 w 950 w 4.4 A 20 A 600 cm/h 49 dB R407c Electronic 19mm 7-35 C 45-99% 52 l/24 hr 62 l/24 hr 48 kg 78cm x 68cm x 25cm

________________________________________________________________________________________ Moisture Cure Pty Ltd, (02) 6584 2511 83 Hastings River Drive, sales@moisturecure.com.au Port Macquarie NSW 2444 www.moisturecure.com.au