Professional Documents
Culture Documents
Benefits
AEC-Q200 automotive qualified -55C to +125C operating temperature range Pb-Free and RoHS compliant EIA, 0402, 0603, 0805, 1206, 1210, 1812, 1825, 2220 & 2225 case sizes DC voltage ratings of 10V, 16V, 25V, 50V, 100V & 200V Capacitance offerings ranging from 0.5pF up to 0.47F Available capacitance tolerances of 0.25pF, 0.5pF, 1%, 2%, 5%, 10% and 20% No piezoelectric noise Extremely low ESR and ESL High thermal stability High ripple current capability Preferred capacitance solution at line frequencies and into the
Ordering Information
C
Ceramic
1206
Case Size (L" x W") 0402 0603 0805 1206 1210 1812 2220
C
Specification/ Series C = Standard
104
Capacitance Code (pF) 2 Sig. Digits + Number of Zeros Use 9 for 1.0 - 9.9pF Use 8 for 0.5 - .99pF ex. 2.2pF = 229 ex. 0.5pF = 508
J
Capacitance Tolerance1 C = 0.25pF D = 0.5pF F = 1% G = 2% J = 5% K = 10% M = 20%
3
Voltage
G
Dielectric G = C0G
A
Failure Rate/ Design A = N/A
C
End Metallization2 C = 100% Matte Sn
AUTO
Packaging/Grade (C-Spec)3 AUTO = Automotive Grade 7" Reel Unmarked
Additional capacitance tolerance offerings may be available. Contact KEMET for details. Additional termination options may be available. Contact KEMET for details 3 Additional reeling or packaging options may be available. Contact KEMET for details.
1 2
One WORLD
One Brand
One Strategy
One Focus
One Team
One KEMET
C1022-1 10/12/2010 1
KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) C0G Dielectric, 10VDC-200VDC (Automotive Grade)
L B
L Length
1.00 (.040) 0.05 (.002) 1.60 (.063) 0.15 (.006) 2.00 (.079) 0.20 (.008) 3.20 (.126) 0.20 (.008) 3.20 (.126) 0.20 (.008) 4.50 (.177) 0.30 (.012) 5.70 (.224) 0.40 (.016)
W Width
0.50 (.020) 0.05 (.002) 0.80 (.032) 0.15 (.006) 1.25 (.049) 0.20 (.008) 1.60 (.063) 0.20 (.008) 2.50 (.098) 0.20 (.008) 3.20 (.126) 0.30 (.012) 5.00 (.197) 0.40 (.016)
B Bandwidth
0.30 (.012) 0.10 (.004) 0.35 (.014) 0.15 (.006) 0.50 (0.02) 0.25 (.010) 0.50 (0.02) 0.25 (.010) 0.50 (0.02) 0.25 (.010) 0.60 (.024) 0.35 (.014) 0.60 (.024) 0.35 (.014)
T Thickness
Mounting Technique
Solder Reflow Only
Applications
Typical applications include critical timing, tuning, circuits requiring low loss, circuits with pulse, high current, decoupling, bypass, filtering, transient voltage suppression, blocking and energy storage.
Qualification/Certification
Automotive grade products meet or exceed the requirements outlined by the Automotive Electronics Council. Details regarding test methods and conditions are referenced in document AEC-Q200, Stress Test Qualification for Passive Components. For additional information regarding the Automotive Electronics Council and AEC-Q200, please visit their website @www.aecouncil.com.
Environmental Compliance
KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com
C1022-1 10/12/2010
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) C0G Dielectric, 10VDC-200VDC (Automotive Grade)
Electrical Parameters/Characteristics
Item
Operating Temperature Range: Capacitance Change with Reference to +25C and 0 Vdc Applied (TCC): Aging Rate (Max % Cap Loss/Decade Hour): Dielectric Withstanding Voltage: Dissipation Factor (DF) Maximum Limit @ 25C: Insulation Resistance (IR) Limit @ 25C: -55C to +125C 30PPM/C 0% 250% of rated voltage (5 1 seconds and charge/discharge not exceeding 50mA) 0.1% 1000 megohm microfarads or 100G
Parameters/Characteristics
To obtain IR limit, divide M-F value by the capacitance and compare to G limit. Select the lower of the two limits. Capacitance and Dissipation Factor (DF) measured under the following conditions: 1kHz 50Hz and 1.0 0.2 Vrms if capacitance 10F 120Hz 10Hz and 0.5 0.1 Vrms if capacitance >10F
KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com
C1022-1 10/12/2010
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) C0G Dielectric, 10VDC-200VDC (Automotive Grade)
C0402
3 25 5 50 1 100 2 200 8 10 4 16
C0603
3 25 5 50 1 100 2 200 8 10 4 16
C0805
3 25 5 50 1 100 2 200 8 10 4 16
C1206
3 25 5 50 1 100 EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EC ED ED ED ED EE EC 1 200 2 100 2 200
Product Availability and Chip Thickness Codes - See Table 2 for Chip Thickness Dimensions
CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB BB CB BB CB BB CB BB CB BB CB BB CB BB CB BB CB BB CB BB CB BB CB BB CB BB CB BB CB BB CB BB CB BB CB BB CB BB CB BB CB BB CB BB CB BB CB BB CB BB CB J CB CB CB Capacitance 1 CB Tolerance CB C = 0.25pF CB D = 0.5pF CB F = 1%CB CB G = 2% 1 CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB 3 CB CB CB CB CB Voltage CB CB CB CB 8 = 10V CB CB 4 = 16V CB CB 3 = 25V CB CB CB CB 5 = 50V 25 16 4 3 CB CB DC DC CB CB DC DC CB CB DC DC CB CB DC DC CB CB DC DC CB CB DC DC CB CB DC DC CB CB DC DC CB CB DC DC CB CB DC DC CB CB DC DC CB CB DC DC CB CB DC DC CB CB DC DC CB CB DC DC CB CB DC DC CB CB DC DC CB CB DC DC CB CB DC DC CB CB DC DC CB CB DC DC CB CB DC DC CB CB DC DC CB CB DC DC CB CB DC DC CB CB DC DC CB CB DC DC CB CB DC DC CB CB DC DC CB CB DC DC CB CB DC DC CB CB DC DC CB CB DC DC CB CB DC DC CB CB DC DC CB CB DC DC CB CB DC DC CB CB DC DC CB CB DC DC CB CB DC DC CB CB DC DC CB CB DC DC CB CB DC DC CB CB DC DC CB CB DC DC CB CB DC DC CB CB DC DC CB CB DC DC CB CB DCA DC G CB CB DC DC CB CB DD Rate/ DD Failure CBDielectric CB DD DD Design CB CB DD DD C0G A = N/A CBG = CB DD DD CB CB DC DC CB CB DC DC CB CB DC DC 200 100 50 10 16 5 1 2 8 4 DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DD DC DC DD DC DC C DC DC DC DC DD DD DD 2 EndDD Metallization DD DD DD DD DD C = 100% Matte Sn DD DD DD DC DC DC DC DC DC DC DC DC 200 100 50 25 3 5 1 2 EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB TU EB EB EB EB EB EB EBPackaging/Grade EB EB EB EB EB EB 3 EB (C-Spec) EB EB EB EB AUTO EB EB= Automotive EB EB Grade EB EB EB7" Reel EB Unmarked EB EB EB EB EB EB EB EB 8 4 3 50 5 25 10 16
Cap
F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F
BB BB BB BB BB BB BB BB K M BB BB BB BB J K M BB BB BB BB J K M BB BB BB BB J K M BB BB BB BB J K M BB BB BB BB J K M BB BB BB BB G J K M BB BB BB BB G J K M BB BB BB BB G J K M BB BB BB BB G J K M BB BB BB BB G J K M BB BB BB BB G J K M BB BB BB BB G J K M BB BB BB BB G J K M BB BB BB BB G J K M BB BB BB BB G J K M BB BB BB BB G J K M BB BB BB BB G J K M BB BB BB BB G J K M BB BB BB BB G J K M BB BB BB BB G J K M BB BB BB BB G J K M BB BB BB BB G J K M BB BB BB BB G J K M BB BB BB BB G J K M BB BB BB BB G J K M BB BB BB BB G J K M BB BB BB BB G J K M BB BB BB BB G J K M BB BB BB BB G J K M BB BB BB BB G J K M BB BB BB BB G J K M BB BB BB BB G J K M BB BB BB BB G J K M BB BB BB BB G J K M BB BB BB BB G J K M BB BB BB BB G J K M BB BB BB BB G J K M BB BB BB BB G J K M BB BB BB BB G J K M BB BB BB BB G J K M BB BB BB BB G J K M BB BB BB BB G J K M BB BB BB BB G J K M BB BB BB BB G J K M BB BB BB BB G J K M BB BB BB BB G JC K M BB BB 104 BB BB G J K M BB BB BB BB G J cation/ K M BB BB BB BB Specifi Capacitance G Series J K M BB BB BB Code (pF)BB G J K M BB BB BB C Standard Sig. BB Digits + G= J K M BB 2 BB of Zeros G J K M BB Number BB BB UseBB 9 for G J K M BB BB G J K M 1.0 - 9.9pF 8
Use 8 for 0.5 - .99pF 3 5 ex. 2.2pF = 229 C0402 ex. 0.5pF = 508
50 25 16 4
J = 5% K = 10% 2 8 M = 20%
200
1 = 100V 2 = 200V
100
10
10
C0603
C0805
C1206
UD = Under Development KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com C1022-1 10/12/2010 4
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) C0G Dielectric, 10VDC-200VDC (Automotive Grade)
Cap Code
272 302 332 362 392 432 472 512 562 622 682 752 822 912 103 123 153 183 223 273 333 473 563 683 823 104
Series
Voltage Code Voltage DC Cap Tolerance F F F F F F F F F F F F F F F F F F F F F F F F F F G G G G G G G G G G G G G G G G G G G G G G G G G G J J J J J J J J J J J J J J J J J J J J J J J J J J K K K K K K K K K K K K K K K K K K K K K K K K K K M M M M M M M M M M M M M M M M M M M M M M M M M M 8 10 4 16
C0402
3 25 5 50 1 100 2 200 8 10 4 16
C0603
3 25 5 50 1 100 2 200 8 10 4 16
C0805
3 25 5 50 1 100 2 200 8 10 4 16
C1206
3 25 5 50 1 100 EC EC EE EE EF EC EC ED ED EB EB EB EB EB EB EB EB EB EC EE EE EH 100 1 2 200 2 200 200 2 200 2
Product Availability and Chip Thickness Codes - See Table 2 for Chip Thickness Dimensions
CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB CB DC DD DD DD DE DE DE DE DC DC DC DC DC DC DC DC DC DC DD DF DG DG DC DD DD DD DE DE DE DE DC DC DC DC DC DC DC DC DC DC DD DF DG DG DC DD DD DD DE DE DE DE DC DC DC DC DC DC DC DC DC DC DD DF DG DG DC DD DD DD DE DE DE DE DC DC DC DC DC DC DC DC DD DD DF DC DC DC DC DC DC DC DC DC DC DC DC DC DC DD DE DG EB EC EC EC EC EC EC ED ED EB EB EB EC EC ED EB EB EB EB EB EB EC ED EF EH EH 200 10 2 8 EB EC EC EC EC EC EC ED ED EB EB EB EC EC ED EB EB EB EB EB EB EC ED EF EH EH 16 4 EB EC EC EC EC EC EC ED ED EB EB EB EC EC ED EB EB EB EB EB EB EC ED EF EH EH 25 3 EB EC EC EC EC EC EC ED ED EB EB EB EC EC ED EB EB EB EB EB EB EE EF EH EH 50 5 1 100 100 1
200
200
100
100
Cap
Cap Code
Voltage Code
Series
C0402
C0603
C0805
100 1
Voltage DC
50
50
50
25
25
25
10
10
10
16
16
16
C1206
C1210
3 25 5 50 1 100 2 200 5 50
C1812
1 100 2 200 3 50
C2220
Product Availability and Chip Thickness Codes - See Table 2 for Chip Thickness Dimensions FB FB FB FB FB FB FB FB FB FB FB FB J FB FB FB FB Capacitance FB FB Tolerance1 FB FB FBC = 0.25pF FB FBD = 0.5pF FB FBF = 1% FB FBG = 2% FB 8 K = 10% 4 FB FB FB FB FB FB 3 FB FB Voltage FB FB 8FB = 10V 4FB = 16V 3FB = 25V 5FB = 50V 25 FB FB FB FB FB FB FB FB FB FB FB FB G FB A C FB FB FB Failure Rate/ 2 End Metallization Dielectric FB FB GB GB Design FB FB FB FB A = N/A GB G = C0G C = 100%GB Matte Sn FB FB FB FB GB GB FB FB 200 200 100 100 50 50 1 2 5 1 2
TU
Packaging/Grade (C-Spec)3 AUTO = Automotive Grade 7" Reel Unmarked
50 3
Cap
J = 5%
M = 20%
1 = 100V 2= 3 200V 5
C1210
10
16
C1812
C2220
UD = Under Development KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com C1022-1 10/12/2010 5
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) C0G Dielectric, 10VDC-200VDC (Automotive Grade)
Cap Code
821 911 102 112 122 132 152 162 182 202 222 242 272 302 332 362 392 432 472 512 562 622 682 752 822 912 103 123 153 183 223 273 333 473 563 683 823 104 124 154 184 224 274 334 474
Series
Voltage Code Voltage DC Cap Tolerance F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FF FB FB FB FB FC FC FE FF FG FG FB FB FB FB FB FB FB FC FE FG FH FJ FK 8 10 4 16
C1210
3 25 5 50 1 100 2 200 5 50
C1812
1 100 2 200 3 50
C2220
1 100 2 200 200 2
Product Availability and Chip Thickness Codes - See Table 2 for Chip Thickness Dimensions FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FF FB FB FB FB FC FC FE FF FG FG FB FB FB FB FB FB FB FC FE FG FH FJ FK FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FF FB FB FB FB FC FC FE FF FG FG FB FB FB FB FB FB FB FC FE FG FH FJ FK FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FF FB FB FB FB FC FC FE FF FG FG FB FB FB FB FB FB FC FF FG FH FM FB FB FB FB FB FB FB FB FB FC FC FC FC FC FF FF FF FF FG FG FG FG FG FC FC FE FF FB FB FB FB FB FB FE FF FG FH FM GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GD GH GK GB GB GB GB GB GB GB GB GB GB GB GB GH GH GG GB GB GB GB GB GB GB GB GB GD GH GN JB JB JB JB JB JB JB JB JB JB JB JB JB JB JB JB JB JB JB JD JG 200 2 50 3 JB JB JB JB JB JB JB JB JB JB JB JB JB JB JB JB JD JD JF JG 100 1
200
100
Cap
Cap Code
Voltage Code
C
Ceramic
1206
Case Size (L" x W") 0402 0603 0805 1206 1210 1812 2220
C Series
Specification/ Series C = Standard
104
Capacitance Code (pF)
J
Capacitance Tolerance1 C = 0.25pF D = 0.5pF F = 1% G = 2% J = 5% K = 10% M = 20%
C1210
G
Dielectric G = C0G
A
Failure Rate/ Design A = N/A
C1812
100 1
Voltage DC
50
50
25
10
16
TU C2220
Packaging/Grade (C-Spec)3 AUTO = Automotive Grade 7" Reel Unmarked
Voltage
2 Sig. Digits + Number of Zeros Use 9 for 1.0 - 9.9pF Use 8 for 0.5 - .99pF ex. 2.2pF = 229 ex. 0.5pF = 508
UD = Under Development KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com C1022-1 10/12/2010 6
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) C0G Dielectric, 10VDC-200VDC (Automotive Grade)
Chip Size
01005 0201 0402 0603 0603 0603 0805 0805 0805 0805 0805 0805 0805 1206 1206 1206 1206 1206 1206 1206 1206 1206 1206 1206 1210 1210 1210 1210 1210 1210 1210 1210 1210 1210 1210 1210 1210 1210 1210 1210 1210 1220 1632 1706 1706 1808 1808 1808 1808 1812 1812 1812 1812 1812 1812 1812 1812 1812 1812 1812 1812 1812 1825 1825 1825 1825 1825 1825 2220 2220 2220 2220 2220 2220 2220 2220 2220 2225 2225 2225 2225 2225
4000 2500 2500 2500 2500 4000 2000 4000 4000 2500 2500 2500 2500 2000 2000 2000 4000 4000 4000 2500 2500 2500 2000 2000 2000 2000 2000 2000 2000 1500 2000 2000 1000 4000 4000 4000 4000 2500 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 500 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 500 1000 1000 1000 1000 1000
10000 10000 10000 10000 10000 10000 8000 10000 10000 10000 10000 10000 10000 8000 8000 8000 10000 10000 10000 10000 10000 10000 8000 8000 8000 8000 8000 8000 8000 4000 8000 8000 4000 10000 10000 10000 10000 10000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 2000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 2000 4000 4000 4000 4000 4000
4000
10000
KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com
C1022-1 10/12/2010
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) C0G Dielectric, 10VDC-200VDC (Automotive Grade)
Soldering Process
Recommended Soldering Technique: Solder wave or solder reflow for EIA case sizes 0603, 0805 and 1206 All other EIA case sizes are limited to solder reflow only Recommended Soldering Profile: KEMET recommends following the guidelines outlined in IPC/JEDEC J-STD-020
Density Level A: For low-density Product applications. Recommended for wave solder applications and provides a wider process window for reflow solder processes. KEMET only recommends wave soldering of EIA 0603, 0805 and 1206 case sizes. Density Level B: For products with a moderate level of component density. Provides a robust solder attachment condition for reflow solder processes. Density Level C: For high component density product applications. Before adapting the minimum land pattern variations the user should perform qualification testing based on the conditions outlined in IPC standard 7351 (IPC-7351).
KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com
C1022-1 10/12/2010
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) C0G Dielectric, 10VDC-200VDC (Automotive Grade)
Reference
Heat Generation T : 20C max. JIS-C-6429 JIS-C-6429
Solderability
J-STD-002
a) Method B, 4 hrs @ 155C, dry heat @ 235C b) Method B @ 215C category 3 c) Method D, category 3 @ 260C
Temperature Cycling Biased Humidity Moisture Resistance Thermal Shock High Temperature Life Storage Life Mechanical Shock Resistance to Solvents
JESD22 Method JA-104 MIL-STD-202 Method 103 MIL-STD-202 Method 106 MIL-STD-202 Method 107 MIL-STD-202 Method 108 MIL-STD-202 Method 108 MIL-STD-202 Method 213 MIL-STD-202 Method 215
1000 Cycles (-55C to +125C), Measurement at 24 hrs. +/- 2 hrs after test conclusion. Load Humidity: 1000 hours 85C/85%RH and Rated Voltage.Add 100K ohm resistor. Measurement at 24 hrs. +/- 2 hrs after test conclusion. Low Volt Humidity: 1000 hours 85C/85%RH and 1.5V.Add 100K ohm resistor. Measurement at 24 hrs. +/- 2 hrs after test conclusion. t = 24 hours/cycle. Steps 7a & 7b not required. Unpowered. Measurement at 24 hrs. +/- 2 hrs after test conclusion. -55C/+125C. Note: Number of cycles required-300, Maximum transfer time-20 seconds, Dwell time-15 minutes. Air-Air. 1000 hours at 125C (85C for X5R, Z5U and Y5V) with 1.5X rated voltage applied. 150C, 0VDC, for 1000 Hours. Figure 1 of Method 213, Condition F. Add aqueous wash chemical - OKEM Clean or equivalent.
KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com
C1022-1 10/12/2010
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) C0G Dielectric, 10VDC-200VDC (Automotive Grade)
KEMET offers Multilayer Ceramic Chip Capacitors packaged in 8mm, 12mm and 16mm tape on 7" and 13" reels in accordance with EIA standard 481. This packaging system is compatible with all tape fed automatic pick and place systems. See Table 2 for details on reeling quantities for commercial chips.
Anti-Static Reel
KE
ME
Chip and KPS Orientation in Pocket (except 1825 Commercial, and 1825 & 2225 Military)
Sprocket Holes
Embossment or Punched Cavity 8mm, 12mm or 16mm Carrier Tape
*EIA 01005, 0201, 0402 and 0603 case sizes available on punched paper carrier only.
Pitch (P1)*
2 4 4 8 8 12 4
*Refer to Figure 1 for W and P1 carrier tape reference locations. *Refer to Table 6 for tolerance specifications. KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com C1022-1 10/12/2010 10
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) C0G Dielectric, 10VDC-200VDC (Automotive Grade)
E1
Ao F Ko B1 Bo E2 W
S1 T1
Cover Tape B 1 is for tape feeder reference only, including draft concentric about B o. Center Lines of Cavity
P1 D 1
Embossment For cavity size, see Note 1 Table 5
0.600 (0.024)
0.100 (0.004)
Note 5
1. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment location and hole location shall be applied independent of each other. 2. The tape with or without components shall pass around R without damage (see Figure 5). 3. If S1<1.0 mm, there may not be enough area for cover tape to be properly applied (see EIA Document 481 paragraph 4.3 (b)). 4. B1 dimension is a reference dimension for tape feeder clearance only. 5. The cavity defined by A0, B0 and K0 shall surround the component with sufficient clearance that: (a) the component does not protrude above the top surface of the carrier tape. (b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed. (c) rotation of the component is limited to 20 maximum for 8 and 12mm tapes and 10 maximum for 16mm tapes (see Figure 3). (d) lateral movement of the component is restricted to 0.5 mm maximum for 8mm and 12mm wide tape and to 1.0mm maximum for 16mm tape (see Figure 4). (e) for KPS Series product A0 and B0 are measured on a plane 0.3mm above the bottom of the pocket. (f) see Addendum in EIA Document 481 for standards relating to more precise taping requirements.
KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com
C1022-1 10/12/2010
11
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) C0G Dielectric, 10VDC-200VDC (Automotive Grade)
E1
A0
F E2 W
B0
T1
P1
Top Cover Tape
T1
1. The cavity defined by A0, B0 and T shall surround the component with sufficient clearance that: a) the component does not protrude beyond either surface of the carrier tape. b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed. d) lateral movement of the component is restricted to 0.5 mm maximum (see Figure 4). e) see Addendum in EIA Document 481 for standards relating to more precise taping requirements. 2. The tape with or without components shall pass around R without damage (see Figure 5).
KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com
C1022-1 10/12/2010
12
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) C0G Dielectric, 10VDC-200VDC (Automotive Grade)
1. Cover Tape Break Force: 1.0 Kg Minimum. 2. Cover Tape Peel Strength: The total peel strength of the cover tape from the carrier tape shall be:
Peel Strength
0.1 Newton to 1.0 Newton (10gf to 100gf) 0.1 Newton to 1.3 Newton (10gf to 130gf)
The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier tape shall be 165 to 180 from the plane of the carrier tape. During peeling, the carrier and/or cover tape shall be pulled at a velocity of 30010 mm/minute. 3. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA-556 and EIA-624.
Bo
Maximum Rotation ( 20 10
T)
Ao
Maximum Rotation ( 20 10 5
S)
16mm Tape
1.0 mm maximum 1.0 mm maximum
Bending Radius
KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com
C1022-1 10/12/2010
13
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) C0G Dielectric, 10VDC-200VDC (Automotive Grade)
W3 (Includes
W2 (Measured at hub) A D
(See Note)
C
(Arbor hole diameter) If present, tape slot in core for tape start: 2.5 mm min. width x 10.0 mm min. depth
N W1 (Measured at hub)
(see Note)
KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com
C1022-1 10/12/2010
14
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) C0G Dielectric, 10VDC-200VDC (Automotive Grade)
END
START
Top Cover Tape
Components
Straight Edge
250 mm
KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com
C1022-1 10/12/2010
15
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) C0G Dielectric, 10VDC-200VDC (Automotive Grade)
10*
110 0.7
5 0*
W Width
0.5 0.05 0.8 0.07
B Bandwidth
0.2 to 0.4 0.2 to 0.5
S Separation minimum
0.3 0.7
T Thickness
0.5 .05 0.8 .07
Number of Pcs/Cassette
50,000 15,000
Laser marking is available as an extra-cost option for most KEMET ceramic chips. Such marking is two sided, and includes a K to identify KEMET, followed by two characters (per EIA-198) to identify the capacitance value. Note that marking is not available for any Y5V chip. ln addition, the 0603 marking option is limited to the K only. (Marking Optional Not Available for 0402 Size)
Numeral Alpha Character
A B C D E F G H J K L M N P Q R S T U V W X Y Z a b d e f m n t y
KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com
C1022-1 10/12/2010
16
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) C0G Dielectric, 10VDC-200VDC (Automotive Grade)
Product Information
Resource Products Technical Resources (Including Soldering Techniques) RoHS Statement Quality Documents http://www.kemet.com/products http://www.kemet.com/technicalpapers http://www.kemet.com/rohs http://www.kemet.com/qualitydocuments Location
Product Request
Resource Sample Request Engineering Kit Request http://www.kemet.com/sample http://www.kemet.com/kits Location
Contact
Resource Website Contact Us Investor Relations Call Us Twitter www.kemet.com http://www.kemet.com/contact http://www.kemet.com/ir 1-877-MyKEMET http://twitter.com/kemetcapacitors Location
Disclaimer
All product specifications, statements, information and data (collectively, the Information) are subject to change without notice. All Information given herein is believed to be accurate and reliable, but is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute and we specifically disclaim any warranty concerning suitability for a specific customer application or use. This Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by us with reference to the use of our products is given gratis, and we assume no obligation or liability for the advice given or results obtained. Although we design and manufacture our products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated or that other measures may not be required.
KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com
C1022-1 10/12/2010
17
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) C0G Dielectric, 10VDC-200VDC (Automotive Grade)
Europe
Southern Europe
Geneva, Switzerland Tel: 41-22-715-0100 Paris, France Tel: 33-1-4646-1009 Sasso Marconi, Italy Tel: 39-051-939111 Milan, Italy Tel: 39-02-57518176 Rome, Italy Tel: 39-06-23231718 Madrid, Spain Tel: 34-91-804-4303
Asia
Northeast Asia
Hong Kong Tel: 852-2305-1168 Shenzhen, China Tel: 86-755-2518-1306 Beijing, China Tel: 86-10-5829-1711 Shanghai, China Tel: 86-21-6447-0707 Taipei, Taiwan Tel: 886-2-27528585
Corporate Offices
Fort Lauderdale, FL Tel: 954-766-2800
North America
Southeast
Lake Mary, FL Tel: 407-855-8886
Southeast Asia
Central Europe
Singapore Tel: 65-6586-1900 Penang, Malaysia Tel: 60-4-6430200 Bangalore, India Tel: 91-806-53-76817
Northeast
Landsberg, Germany Tel: 49-8191-3350800 Dortmund, Germany Tel: 49-2307-3619672 Kwidzyn, Poland Tel: 48-55-279-7025
Central
Northern Europe
Bishops Stortford, United Kingdom Tel: 44-1279-757201 Weymouth, United Kingdom Tel: 44-1305-830747 Coatbridge, Scotland Tel: 44-1236-434455 Frjestaden, Sweden Tel: 46-485-563934 Espoo, Finland Tel: 358-9-5406-5000
West
Mexico
Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of KEMET Electronics Corporation. KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com C1022-1 10/12/2010 18