Professional Documents
Culture Documents
Turning On and Off The Camera
Turning On and Off The Camera
First Steps
C C
Message
If Turn the camera off, remove the lens cap, and turn the camera on. is displayed, confirm that the lens cap is removed and press the power switch to turn the camera on again.
If no operations are performed, the monitor is turned off automatically, the camera enters standby mode and the power-on lamp blinks. The camera turns off when the standby mode continues for about three minutes. When the power-on lamp blinks, turn on the monitor again with one of the following operations. - Press the power switch, the shutter-release button, the c button or the b (e movie-record) button. - Rotate the mode dial. In shooting or playback mode, the camera enters standby mode in about one minute (default setting). The time that elapses before the camera enters standby mode can be changed from the Auto off (A199) in the setup menu (A185).
23