Professional Documents
Culture Documents
EE 306 Lab Exam - Spring - 2013
EE 306 Lab Exam - Spring - 2013
1. 1.1 Design an inverting amplifier for the gain of 15. Let R1=1.5k. Assemble the circuit. 1.2 Feed sinusoidal input of amplitude 100mv and frequency 1KHz. 1.3 Observe the input and output voltages on a CRO. Tabulate the readings in the given table. 1.4 Calculate the Closed-loop Gain ACL, Band-width BW, Gain Band-width,GBW, Zi and ZO. Tabulate the readings in the table. 1.5 Compare the experimental results with the theoretical values.
Op-amp circuit Input Signal Amplitude Inverting Amplifier Output Signal Voltage Gain Designed Observed Frequency Amplitude Frequency Value value
) of around
1. 1.1 Design a non-inverting amplifier for the gain of 15. Let R1=1.5k Assemble the circuit. 1.2 Feed sinusoidal input of amplitude 100mV and frequency 1kHz. 1.3 Observe the input voltages and output voltage on a CRO. Tabulate the reading in the given table. 1.4 Calculate closed-loop gain (ACL), bandwidth (BW), gain-bandwidth product (GBW), input impedance (Zi), and output impedance (Zo). Tabulate the readings in the table. 1.5 Compare the experimental results with the theoretical values.
Op-amp circuit
Output Signal Voltage Gain Designed Observed Frequency Amplitude Frequency Value value
Non-inverting Amplifier
Hint :
) of around