Professional Documents
Culture Documents
Winvncviewer User Guide
Winvncviewer User Guide
Winvncviewer User Guide
Viewer
User Guide
Contents
Introduction 3 VNC Viewer options 13
What are VNC Viewer and Server? 3 Colour & Encoding 13
Scaling 14
Using VNC Viewer 4 Identities 14
Making a VNC Viewer connection 4 Inputs 15
Scaling the viewer window 5 Misc 16
Alternative ways to make connections 6 Load/Save 17
Using the VNC Viewer quick launch icon 6 Browser viewer F8 menu 18
Using the listening VNC Viewer tray icon 6 Browser viewer options dialog 19
Using a .vnc file to initiate the connection 6 Using port numbers 20
Using the command-line 6 Specifying a port number in VNC Viewer 20
Making a second connection from an existing one 6 Specifying a port number in a browser viewer 20
Using a standard web browser 7 What is a port? 20
Viewing a different remote system 8 What is an IP address? 21
Limitations of VNC Viewer for Java 8
Using the listening viewer option 9 Assistance 22
Troubleshooting 22
Transferring files 10 Warnings and error messages 22
Support 24
Further information 11
Via the web 24
What is encryption? 11
Acknowledgements 24
Altering encryption settings 11
VNC Viewer F8 menu 12 Index 25
page
2 contents introduction using vnc viewer further information assistance index
Introduction
What are VNC Viewer and Server?
VNC offers a deceptively simple service - it allows you to view and control a remote system as
though seated next to it, wherever you are.
The compact VNC Server 4 application runs on the system to be controlled. Meanwhile, con-
necting systems can either run the VNC Viewer application or use a standard web browser to
download and use a Java viewer from the server system.
VNC adapts itself automatically and dynamically to varying conditions, including differing
screen contents and network bandwidths. VNC is also platform independent and will happily
allow a Windows system to control a Linux server, or vice versa.
NETWORK
page
3 contents introduction using vnc viewer further information assistance index
Using VNC Viewer
Making a VNC Viewer connection
VNC Viewer can be started in a number of ways. See Alternative ways to make connections
for further details.
To make a connection
1 Start the VNC Viewer, either: 4 Depending on circumstances, one or more of the following will happen:
• Double click the VNC Viewer desktop icon • If the remote system requires authentication, this dialog will be displayed:
or
i Click the Windows Start button and choose All Programs (or Programs in non-XP versions).
ii Select the RealVNC entry, then VNC Viewer 4 and finally select Run VNC Viewer. Enter a username and password, or just a
password if the Username field is blanked
out. Then click the OK button to continue.
• A warning or error message may be displayed, or
• The VNC Viewer window will show the current desktop of the remote system and allow
you to control it:
page
4 contents introduction using vnc viewer further information assistance index
Scaling the viewer window
VNC Viewer 4 offers a new feature of scaling so that you can alter the overall size of the To enable the scaling feature
remote system screen image as it appears on your local viewer system. 1 Display the VNC Viewer Options dialog either:
• While making a connection: Click the Options... button in the Connection details dialog,
or
• During a connection: Press F8 and select the Connections... option.
2 Select the Scaling tab.
page
5 contents introduction using vnc viewer further information assistance index
Alternative ways to make connections
There are a number of alternative ways to launch VNC Viewer and to make connections with
remote systems, as follows:
• Using the VNC Viewer quick launch icon
• Using a .vnc file to initiate a connection
• Using the command-line
Using a .vnc file to initiate the connection
• Making a second connection from an existing connection
A .vnc configuration file allows you to store VNC Viewer setup information and connection
• Using a standard web browser (no need for VNC Viewer) details so that they can be quickly used again. See Saving and loading configuration (.vnc)
• Using the listening viewer option files for details about creating a .vnc file.
You can use a .vnc file, using your mouse, in two main ways:
Using the VNC Viewer quick launch icon • Double click the .vnc file. This will work only if your VNC Viewer was installed using the
Note: The quick launch icon feature is not available in Windows 95, 98, ME, NT4 or Server 2003. VNC setup program and is consequently registered within Windows. If so, Windows will
start VNC Viewer and apply the details stored within the .vnc file.
During the VNC installation, an option was available to create a VNC Viewer quick launch
icon. If this option was chosen, then your system will show a VNC icon adjacent to the Start • Drag and drop the .vnc file onto the VNC Viewer icon. This will start VNC
Viewer and apply the details stored within the .vnc file.
Note: You can also use a .vnc file using the command line option, discussed next.
continued
page
6 contents introduction using vnc viewer further information assistance index
Using a standard web browser
When you need to access your system via a computer that lacks a VNC Viewer (in an Internet 3 Click Yes, No or Always, as appropriate. The remote VNC Server will download the neces-
café, for instance), the VNC Server program provides a neat feature to give quick and easy sary Java applet and then present a Connection details dialog:
access. VNC Server can download a compact Java applet, upon request, to any standard web
browser that will temporarily allow it operate in the same way as VNC Viewer.
1 Launch your web browser and enter either the IP address or URL of the remote system in
the following way:
or
Enter the IP address preceded by http:// and fol- Enter the url, followed by a colon and then the
lowed by a colon and then the port number used port number used by the remote system - most
The Server entry
by the remote system - most commonly 5800. commonly 5800.
should hold the
address/name of
2 Press Enter to accept. If this is a first-time connection to the VNC Server, then your the remote system
browser will probably ask you to confirm that you trust the Java applet: entered earlier.
page
7 contents introduction using vnc viewer further information assistance index
5 Check the details and if you are confident of the server (see Warnings and error messages Viewing a different remote system
for details), click the Yes button. If you accepted the Java applet as trusted (i.e. if you clicked Yes or Always during the initial
Subject to the security settings of the remote system, the browser may now display an connection) then you will have the ability to connect with other remote systems running
authentication dialog: VNC Server, not just the one that supplied the Java applet.
Note: When connecting to some systems (just before this dialog is displayed) you may be asked
to enter a series of random characters upon which it will base the encryption key. If requested The dialog will initially show the address
to do this, enter a long string of random characters (the longer and more random the string, of the VNC Server system that supplied the
the less chance of it being decrypted by a potential attacker). Java applet.
6 Enter a valid Username and/or Password and press Enter.
The viewer window will now be displayed: 2 Enter the address of the new remote system that you wish to view and either click the OK
button or optionally alter other connection settings - see step 4 of the Using a standard
web browser section.
page
8 contents introduction using vnc viewer further information assistance index
Using the listening viewer option
In certain situations it can be useful to allow a remote system to initiate the connection to
your VNC Viewer, rather than the converse. Such instances could include:
• In a demonstration situation (classroom or seminar) where more than one viewer system
will simultaneously connect to a single server system.
• Where the firewall protecting the local network of the remote system will not allow incom-
ing connections to be made.
To allow this to occur, your VNC Viewer must be started in a special mode that leaves it
dormant within the system tray until an incoming connection is received from a remote VNC
Server system. You can start and use VNC Viewer in the usual manner alongside the special
listening version.
Note: If the local viewer system is situated behind a firewall (i.e. the remote server system is
external to the viewer’s local network), then the firewall needs to allow incoming connections at
port 5500.
To set VNC Viewer into listening viewer mode To initiate a connection to the viewer from the remote system
1 Click the Windows Start button and choose All Programs (or Programs in non-XP versions). 1 On the remote server system, right click on the VNC Server icon in the system tray.
2 Select the RealVNC entry, then VNC Viewer 4 and finally select Run Listening VNC Viewer. 2 From the popup menu, click the Add New Client option.
A VNC Viewer icon will be added to the Windows system tray area in the lower right cor- 3 In the resulting popup dialog, enter the IP address of the viewer system and click OK.
ner of the screen: No username or password are required.
A viewer window will open on the local system showing the desktop of the remote server
system, exactly as if it had been started in the usual manner.
Listening viewer icon
To end a listening viewer connection
Listening viewer connections can be terminated by either party, either:
The listening viewer will remain in this dormant state until a remote system initiates a
connection - see opposite. • From the viewer: Close the viewer window.
• From the server: Right click on the VNC Server 4 icon in the system tray and select the
To stop listening viewer mode Disconnect Clients option.
1 Right click the listening viewer icon in the system tray.
2 In the resulting popup menu, select the Close Daemon option.
page
9 contents introduction using vnc viewer further information assistance index
Transferring files
On Windows-based computers, you can transfer files via the clipboard to and from a VNC
Server to which you are connected. To copy some files from the computer running VNC
Viewer to the computer running VNC Server, do the following:
• Connect to the VNC Server.
• Ensure that both the Server and Viewer components are at least version 4.2. Earlier ver-
sions do not support file transfer.
• Ensure that file transfer is enabled. See ‘Enable file transfer’ for details on how to enable
file transfer on the VNC Viewer; see the VNC Server documentation for details on how to
enable file transfer on the VNC Server.
• Select the files or folders you want to copy. You can select multiple files at the same time.
• Copy them to the clipboard using either Ctrl+C, or selecting Copy from the Edit menu or
from the context (right-click) menu.
• Open the folder into which you want to copy files and paste then using either Ctrl+V or
selecting Paste from the Edit menu or from the context menu.
The files will be transferred using the existing VNC connection. Note that you can interact
with the VNC session while the copy is in progress, but your files will transfer faster if there is
no other network activity while the files are being copied.
It is not currently possible to drag and drop files into
or out of the VNC Server desktop. It is also not pos-
sible to cut and paste files; if you cut files to the clip-
board of the computer running VNC and paste them
remotely (or vice versa) then the files will be copied,
but will not be deleted from their original location.
Please note that the Java VNC Viewer does not sup-
port file transfer.
page
10 contents introduction using vnc viewer further information assistance index
Further information
This section provides detailed information on a range of subjects related to VNC Viewer 4:
• What is encryption?
• Altering encryption settings
Altering encryption settings
The Let Server Choose option is the default encryption setting for VNC Viewers and defers the
• VNC Viewer F8 menu decision to encrypt or not, to the remote server system. Many servers in turn, will have their
• VNC Viewer options encryption settings configured to Always On.
Colour & Encoding The alternative encryption options available for the viewer are as follows:
Scaling • Identities
Inputs • Misc • Always On ensures that the link is always encrypted. When accessing older versions of
Load/Save VNC Server (that do not support encryption), the use of this setting will cause the con-
nection to be aborted.
• Browser viewer F8 menu
• Prefer Off requests an unencrypted link but will use encryption if the server insists on it.
• Browser viewer options dialog • Prefer On requests encryption, if the server can support it, but will accept an unencrypted
• Using port numbers link if the server cannot support it.
Specifying a port number in VNC Viewer The Encryption: box of the Connection Details dialog indicates the currently selected setting.
Specifying a port number in a browser viewer After the connection is established, the encryption scheme in use (either No encryption or
What is a port? 128-bit AES encryption is displayed in the title bar of the authentication dialog and also in the
• What is an IP address? connection details dialog accessible using the F8 menu.
page
11 contents introduction using vnc viewer further information assistance index
VNC Viewer F8 menu
To access the VNC Viewer F8 menu
1 Do one of the following, either:
• Press the F8 function key (the F8 setting can be altered to use any of the other
function keys, see VNC Viewer Options),
or
• Right click on the VNC icon in the top left corner of the VNC Viewer window.
The viewer menu will be displayed:
Full screen passed on to the remote system. If F8 is altered (in VNC Viewer
Hides the Windows menu bar and VNC Window so that the Options) as the access to the menu, then this menu option
screen image of the remote system fills the entire local desktop. changes accordingly.
page
12 contents introduction using vnc viewer further information assistance index
VNC Viewer options
VNC Viewer options are available either: ZRLE
• While making a connection: Click the Options... button in the Connection details dialog), This method subdivides the remote system screen into many small rectangles which are then
individually described. Where adjoining rectangles are of the same colour (i.e. in plain back-
or
grounds), each subsequent similar rectangle can simply refer to the last and consequently
• During a connection: Press F8 and select the Connections... option. reduce the information sent. ZRLE uses a high compression rate on all transmitted data
and thus, best suits a slower connection such as a modem link. However, more processing is
The Options dialog contains six tabbed pages:
required to decompress and reassemble the received files.
Colour & Encoding | Scaling | Inputs | Misc | Identities | Load/Save [Command line equivalent: PreferredEncoding=ZRLE]
Hextile
Colour & Encoding This method subdivides the screen information into rectangles in a similar manner to ZRLE,
These options determine how the server screen image is transmitted and redrawn. however, it does not compress the information. This means that when it arrives at the view-
ing system, there is less work for the processor to do in reassembling the screen image. The
increase in transmitted data makes Hextile encoding more suitable for faster communication
links.
[Command line equivalent: PreferredEncoding=Hextile]
Raw
This method simply transmits the remote system screen as a series of decompressed pixel
descriptions. This method requires a fast connection speed, however, due to the reduced
workload in reassembling the screen data, the performance overhead on the viewer system is
lower.
[Command line equivalent: PreferredEncoding=Raw]
Colour level
This option allows you to manually select the colour level to use in redrawing the remote
system screen. Ranging from Full (all available colours) to Very low (8 colours) the options
provide a balance between image quality and network link connection speed.
Auto select Note: When the Auto select box is ticked then, dependant on the connection speed, the VNC
When ticked, the VNC Viewer will automatically check the connection speed to determine Viewer may automatically override any manual colour setting and select the Full colour option.
the most appropriate method for encoding the remote system screen image and also whether [Command line equivalents:
to use full colour. FullColour=true/false
[Command line equivalent: AutoSelect=true/false] LowColourLevel=2
Preferred encoding LowColourLevel=1
The encoding options given here relate to how the screen of the remote system is described LowColourLevel=0]
and sent to the viewer system. There are various methods available (ZRLE, Hextile and Raw)
and each can be specifically selected. However, you are recommended to leave the Auto select
option ticked so that the VNC Viewer can select the most appropriate method to match the
connection speed.
page
13 contents introduction using vnc viewer further information assistance index
Scaling Identities
These options provide the ability to reduce or increase the size of a remote system screen The identities list contains details of all remote systems that have previously been contacted
when it is displayed on the viewer system. This allows a server screen that uses a high resolu- and provides a known-good reference.
tion to be displayed in full on a viewer system running at a lower resolution or vice versa.
When a connection is made to any remote system, VNC Viewer checks this list and displays a
warning if:
Scaling options
• The remote system is not listed (no record of a previous visit), or
No Scaling
• The security key of a remote system has changed since the last visit.
When selected, the remote system screen is shown unaltered in size within the viewer window.
[Command line equivalent: Scaling=None] The option buttons given here allow you to Remove selected systems, or Remove All remote
systems from the list. You can also (during a new connection) manually add the current
Scale to Window Size remote system to the list.
When selected, the remote system screen is dynamically scaled up or down as necessary to fit
the size of the VNC Viewer window.
[Command line equivalent: Scaling=Fit or Scaling=AspectFit (to preserve aspect ratio)]
Custom Size
When selected, you can determine the exact level of scaling to apply to the displayed server
screen image within the VNC Viewer window. Using the drop down list on the right of the
options dialog, you can select the scaling units: Percent or Pixels. Using either the Scale Width
to: or Scale Height to: edit fields, enter the required scaling figure. If the Preserve Aspect Ratio
box is ticked, then the other edit field will mimic the value that you enter. Untick the Preserve
Aspect Ratio box to scale the width and height by different amounts – note that the remote
system screen image will be distorted as a result.
[Command line equivalent: Scaling=WWx, xHH, WWxHH, SS% or XX%xYY%]
where: WW and HH are width and height, respectively, in pixels; XX and YY are horizontal
and vertical scaling factors; and SS is an overall scaling factor.
page
14 contents introduction using vnc viewer further information assistance index
Inputs
These options control the information and events that are sent to the server system.
page
15 contents introduction using vnc viewer further information assistance index
Misc Render cursor locally
These options cover a range of functions not classified elsewhere. When ticked, the mouse cursor of the remote system is rendered locally by the VNC viewer.
This makes the cursor more responsive to mouse movements and is particularly useful when
using slower network or modem connections.
[Command line equivalent: UseLocalCursor=true/false]
page
16 contents introduction using vnc viewer further information assistance index
Load/Save
This page allows you to manage the default options for VNC Viewer so that required settings
are available every time a new connection is made. It also controls the creation and reloading of
Configuration (.vnc) files that can store specific connection details as well as current settings.
Configuration File
VNC Viewer offers the ability to create a configuration file that stores not only the current
settings for the viewer but also, if saved during a connection, the connection details, server
identity and optionally the password of the remote system. The saved configuration file
(which has a .vnc extension) can then be reloaded within the same VNC Viewer or used by
other viewers to create replica connections - see Alternative ways to make connections for
details.
page
17 contents introduction using vnc viewer further information assistance index
Browser viewer F8 menu
To access the viewer F8 menu
1 Press the F8 function key. The viewer menu will be displayed:
Exit viewer Refresh Screen
Closes the viewer window. Requests a complete screen refresh from the remote system.
page
18 contents introduction using vnc viewer further information assistance index
Browser viewer options dialog
To access the viewer options menu
1 Press the F8 function key to display the viewer F8 menu.
2 Select the Options... entry. The options menu dialog will be displayed:
page
19 contents introduction using vnc viewer further information assistance index
Using port numbers
Specifying a port number in VNC Viewer What is a port?
When using VNC Viewer you should not normally need to enter a port number, only the Not to be confused with a physical port (such as a USB port or a printer port) to which you
address of the remote server system. This is because the majority of VNC Server installations connect devices, a Port in this context could be more accurately described as a ‘service contact-
use the standard port number of 5900 and all VNC Viewers are configured by default to use point’. It is used to help define the kind of data that are being transmitted and, as a result,
that number. The only time that a port number will be required is when a remote system is how to channel them.
configured to an alternative number. Imagine the problem that exists for networking equipment. A disparate mixture of messages
and information are continually flowing from system to system, via gateways and routers,
To specify a non-standard port number in VNC Viewer
and each needs to find the correct destination. In this process, the IP address plays a critical
1 Contact the administrator to discover the address and port number of the remote system.
role in making sure that the right items arrive at the right places, however, the unsung hero is
2 Display the Connection details dialog in the usual manner. definitely the port number. While the IP address directs the postman to the correct building,
3 Enter the address (IP address or url) of the remote server system, immediately followed by it’s the port number that gets the package through the door of the correct apartment. With-
two colons and then the port number: out the port number, there would be piles of unclaimed packages filling the foyer.
Every application that sends or receives information across a network uses a port number.
In many cases they are fixed numbers that are always used by particular applications, and
Enter the address, then two colons and then
because they are not often changed, they are not normally mentioned. For instance, if you
the non-standard port number (in this case
5200). Alternatively, you can express the port send an email (via the most common method), then your message will be marked with port
as a desktop number - see below right. number 25. Whenever you browse the Web, the information will always be denoted with port
number 80 and VNC applications almost always send and receive using port number 5900.
The systems at the receiving end then know to route messages marked as port 25 to the email
4 Proceed with the connection the usual manner.
server, port 80 to the web server, port 5900 to the VNC server and so on.
Specifying a port number in a browser viewer
When you use a browser to connect to a remote system, the initial connection is always to an Desktop numbers
alternate port where the server will provide the necessary Java applet to the browser. Once the An alternative way to express a port number is as a desktop number. Desktop numbers
Java applet is running on the viewer system, the actual viewing session will then switch to the represent ports that lie in the range 5900 to 5999 and require a single colon followed by a
main port number used by the server (usually 5900). Whenever you use a browser, you must number between 0 to 99. Thus, a connection to my_machine::5902 can equally be expressed
always specify the initial Java port number - most VNC Server installations use port 5800. as my_machine:2. Desktop numbers are important when connecting to UNIX VNC Servers.
page
20 contents introduction using vnc viewer further information assistance index
What is an IP address?
An IP address is a unique identity given to every device connected to a network of any size: Now, when xyz company needs to connect their many internal computers to the Internet,
from a two system link up at home, to every system on the Internet. they might only be given a single public address, say 80.42.0.252. They would then connect a
IP addresses are written as four decimal numbers separated by full stops, such as 192.168.0.4 Gateway system to the Internet and give it that unique public address. Situated on the other
This is called dotted decimal notation and is used as a means of concealing the equivalent real side of that gateway would be the company’s local network and every system in that local net-
address that is actually used by computers and networking equipment. The bare truth is that work would receive a private IP address. For small local networks, the most common private
every IP address is really a pattern of 32 ones and zeroes. address range is that which starts at 192.168.0.0.
At the inception of the Internet in the 1960s and 1970s, even by wildest estimates, no one ever Every computer in the local network (or subnet) will use their number that is unique to them
expected they would need more than the seemingly inexhaustible 4.2 billion unique address within the local network. However, the public identity for all of those local systems, as they
patterns that are afforded by 32 ones and zeroes. However, two factors conspired to prove this pass information out across the Internet, will always be that of the gateway: 80.42.0.252. It
to be wrong: Firstly, the amazing proliferation and expansion of the Internet; and secondly, is the job of the gateway to translate addresses between the local and wider networks. The
the rather inefficient way in which those addresses where originally handed out to organisa- gateway must ensure that messages and data are sent through to the correct locations without
tions and companies. The result was that by the early 1990s, it was already apparent that at the private addresses ever leaking out. Assisting with this task are the subnet mask and port
the projected growth rates, the reserve of 4.2 billion addresses would soon all be gone. numbers. In this way, there are now many systems using similar private IP addresses, how-
ever, because those numbers only ever exist in local domains, there is never any confusion.
In order to prolong the current stocks of numbers, the allocation of addresses was greatly
tightened and the idea of public and private addresses was introduced. In the opening sen- Of course, most people never see an IP address. To make network addresses even more mem-
tence here, it was stated that an IP address is a unique identity - this no longer strictly true. orable than the dotted decimal notations (which in turn are used to the hide the true binary
values), they are usually converted into named addresses. Such conversions are handled by
Of the 4.2 billion possible addresses, almost all of them are still used as unique public ad-
the Domain Name System and your browser uses it every time you visit a web site.
dresses. However, in the revised plan, three groups of addresses were held aside for use as
private addresses:
• 10.0.0.0 to 10.255.255.255
• 172.16.0.0 to 172.31.255.255
PRIVATE
• 192.168.0.0 to 192.168.255.255 IP ADDRESS:
192.168.0.2 PRIVATE
To avoid confusion, these ranges are XYZ COMPANY ABC LIMITED IP ADDRESS:
GATEWAY GATEWAY 192.168.0.2
never used as public addresses.
INTERNET
page
21 contents introduction using vnc viewer further information assistance index
Assistance Connection closed unexpectedly
Troubleshooting
Warnings and error messages
When connecting to remote systems there are a number of messages that may be displayed
depending on the varying circumstances. This section aims to explain the most common
messages that you may encounter. This error indicates that the IP address entered into VNC viewer was valid and contacta-
ble and that something accepted the connection, but the connection was closed without
Connection refused (10061) reporting a specific error message. Check the following:
• Does the error persist if you click Yes?
• Is the VNC server running and accepting connections on the port you’re trying to con-
nect to?
• Is the access control of the VNC server is configured to allow access from the IP ad-
dress of the computer you’re connecting from? The default configuration does not
This error indicates that the IP address entered into VNC viewer was valid and contactable, restrict access based on IP address.
but that nothing was accepting connections on the default port. The most likely causes are: • Are there any error messages logged to the application event log of the computer run-
• An incorrect address has been entered for the remote system, ning VNC server? If so, please include this information if you need to submit a support
• VNC Server is not running or is not accepting connections, request.
• VNC Server is configured to use a non-standard port number. • Is the application event log full on the computer running VNC server? If so then
empty it or configure it to overwrite old entries.
This error indicates that no response was received from the VNC server, even to reject the
connection. It may be caused by network failure, but the most common causes are: Possible cause:
• Trying to connect to a VNC Server that is behind a NAT router using its private IP address, • The remote system does not support encryption (possibly an earlier version or a Free
Edition of VNC Server) but your VNC Viewer is demanding an encrypted link, or vice
• Trying to connect to a VNC Server that is behind a NAT router without setting up the
versa.
appropriate port forwarding. See your router’s documentation for details on how to set up
port forwarding. To remedy this situation either, upgrade the remote system to a higher version of VNC
Server, or change the Encryption setting on your VNC Viewer to Let Server Choose and
• Trying to connect to a VNC Server that is behind a firewall that has not been configured
try to reconnect (Caution: the resulting link will be unencrypted).
to allow VNC traffic through. See the section entitled Dealing with firewalls in the VNC
Server documentation for more details.
page
22 contents introduction using vnc viewer further information assistance index
VNC Viewer version
VNC Viewer version
page
23 contents introduction using vnc viewer further information assistance index
Support
If you are unable to solve your problem after checking through the Troubleshooting section in
this guide, please take a look at our on-line FAQ page and also the Known Bugs & Features sec-
tion of the RealVNC website.
If you still cannot find a solution, then please contact us for further assistance:
Search indexes
Provides an opportunity to search through the various VNC databases for solutions.
www.realvnc.com/swish-e/search
Mailing lists
Real VNC provide discussion forums for important announcements and many other VNC-re-
lated subjects. You can browse or search previous discussion entries, or alternatively subscribe to
one or more forums.
www.realvnc.com/lists.html
Acknowledgements
VNC Viewer contains software from more than one source. For full details of this software and
the terms under which it is distributed, see the RealVNC website.
www.realvnc.com/products/personal/4.2/acknowledgements.html
page
24 contents introduction using vnc viewer further information assistance index
Index
A F L S W
Address F8 menu Listening viewer 9 Scaling Warnings 22
entering in a browser 7 browser 18 tab 14 Web browser
Attack VNC Viewer 4, 12 M window size 5 using 7
man-in-the-middle 11 FAQ 24 Menu Support 24
Authentication getting assistance 24 Z
H F8 - browser 18
browser viewer 8 F8 - VNC Viewer 12 ZRLE
VNC Viewer 4 T
Hextile Misc encoding 13
B encoding 13 tab 16 Tabs
Colour & Encoding 13
Browser I O Identities 14
making a connection 7 Icon Options Inputs 15
desktop 4 browser 19 Misc 16
C Scaling 14
quick launch 6 VNC Viewer 13
Colour & Encoding Identities U
tab 13 tab 14 P
Configuration files Inputs Password URL
using .vnc to start connection 6 tab 15 browser connection 8 entering in a browser 7
Connection IP address VNC Viewer connection 4 Username
alternative methods 6 entering in a browser 7 Port browser connection 8
end 4 entering in VNC Viewer 4 what is it? 20 VNC Viewer connection 4
second 6 what is it? 21
Connection details Q V
browser 7 J
Quick launch icon 6 Viewer
VNC Viewer 4 Java listening 9
E applet 7 R VNC Viewer icon 4
Encryption Raw
settings 11 encoding 13
End connection 4
Error messages 22
page
25 contents introduction using vnc viewer further information assistance index