Professional Documents
Culture Documents
Catalogo General de Repetidores
Catalogo General de Repetidores
2004-02-05
LGPAllgon Repeaters
Repeater products
Product list
Standard
Band Selective
800 MHz 900 MHz 1800 MHz 1900 MHz EGSM
Compact
Band Selective
800MHz 900 MHz 1800 MHz 1900 MHz
Combi
Dual Band
Standard Compact
WCDMA
Standard / Compact
Moving repeaters
Maritime In-train
CDMA
1900 MHz 800 MHz
Allgon Fiber
Allgon Fiber optic system
Mechanical Drawings
Standard Low Standard High Compact Low Compact High
Conformity
Allgon Repeater Conformity Repeater Certificates
Product
AR4200_052 AR4200_053 AR4600_052
Description
25 MHz BW IDEN
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-07
AR4200/052-201 G
Fil/file
PRODUCT SPECIFICATION
AR4200_052_G.doc
45-85 6 Continuously 0.5-16.9 25 16.9 BW 3dB + 1.2 BW 3dB + 2.2 5 +36 +30 -13 Implemented 6 +13 14 115 160
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-07
AR4200/053-201 C
Fil/file
PRODUCT SPECIFICATION
AR4200_053_C.doc
Specification of a Band selective Repeater 800 MHz, 25 MHz BW version Product Number: AR4200/053
1. Electrical specification (typical values) The repeater complies with the requirements of FCC Frequency band Up link Frequency band Down link Duplex spacing Absolute group delay Gain adjustment range (1 dB steps) Gain (max variation 25 to +55 C) Antenna isolation supervision Filter band width (remotely adjustable) Filter setting resolution Selectivity BW 3dB Selectivity BW 20dB Selectivity BW 30dB Pass band ripple Output power, PEP Output power 2 carrier Max out of band spurious emission Automatic gain control Noise figure at 85 dB gain, 25 C (typical) Maximum input power (non-destructive) Receiver input port return loss Power supply voltage Power consumption, max 2. Environmental specification Temperature range Casing class 3. Mechanical specification Dimensions. (W x H x D) Mechanical outline Weight RF connectors 17.4 x 20.9 x 6.9 440 x 530 x 175 See Standard Low 46 21 N-type female Inches mm lbs Kg -25 to + 55 C -13 to + 131 F IP65
824 - 849 869 - 894 45 <6 45-85 6 Continuously 0.5-25 25 25 BW 3dB + 1.2 BW 3dB + 2.0 6 +36 +30 -13 Implemented 6 +13 14 115 160
MHz MHz MHz s dB dB MHz kHz MHz MHz MHz dB dBm dBm/carrier dBm dB dBm dB V AC W
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-07
AR4600/052-201 E
Fil/file
PRODUCT SPECIFICATION
AR4600_052_E.doc
Specification of a Band selective Repeater IDEN, 800 MHz Product number: AR4600/052
1. Electrical specification (typical values) The repeater complies with the requirements of FCC Frequency band Up link Frequency band Down link Duplex spacing Absolute group delay Gain adjustment range (1 dB steps) Gain (max variation 25 to +55 C Antenna isolation supervision Filter band width (remotely adjustable) Filter setting resolution Selectivity BW 3dB Selectivity BW 45dB Selectivity BW 50dB Pass band ripple Output power, PEP Output power 2 carrier Max out of band spurious emission Automatic gain control Noise figure at 85 dB gain, 25 C (typical) Maximum input power (non-destructive) Receiver input port return loss Power supply voltage Power consumption, typ. (max) 2. Environmental specification Temperature range Casing class 3. Mechanical specification Dimensions. (W x H x D) Mechanical outline Weight RF connectors 17.4 x 20.9 x 6.9 440 x 530 x 175 See Standard Low 46 21 N-type female Inches mm lbs Kg -25 to + 55 C -13 to + 131 F NEMA4/IP65 806 825 851 - 870 45 <6 45-85 6 Continuously 0.5-16.9 25 16.9 BW 3dB + 1.2 BW 3dB + 2.2 4 +36 +30 -13 Implemented 6 +13 14 115 160 MHz MHz MHz s dB dB MHz KHz MHz MHz MHz dB dBm dBm/carrier dBm dB dBm dB V AC W
Product
AR1200_052 AR1200_053
Description
16,5 MHz BW 25 MHz BW
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-07
AR1200/052-201 G
Fil/file
PRODUCT SPECIFICATION
AR1200_052_G.doc
MHz MHz MHz s dB dB MHz kHz MHz MHz MHz dB dBm dBm/carrier dB dBm dB V AC W
17.4 x 20.9 x 6.9 440 x 530 x 175 See Standard Low 46 21 N-type female
Inches mm lbs Kg
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-07
AR1200/053-201 C
Fil/file
PRODUCT SPECIFICATION
AR1200_053_C.doc
STANDARD Band selective Repeater 900 MHz, 25 MHz BW Product Number: AR1200/053
1. Electrical specification (typical values) The repeater complies with the requirements of ETS 300 609-4 Frequency band Up link 890 - 915 Frequency band Down link 935 - 960 Duplex spacing 45 Absolute group delay <6 Gain adjustment range (1 dB steps) 45-85 6 Gain (max variation -25 to +55 C) Antenna isolation supervision Continuously Filter band width (remotely adjustable) 0.5-25 Filter setting resolution 25 Automatic gain control Implemented Selectivity BW 3dB 25 Selectivity BW 35dB BW 3dB + 1.2 Selectivity BW 45dB BW 3dB + 2.2 Pass band ripple 6 Output power, PEP +29 Output power 2 carrier +23 6 Noise figure at 85 dB gain, 25 C (typical) Maximum input power (non-destructive) +13 Receiver input port return loss 14 Power supply voltage (default) 230 Power consumption, max 160 2. Environmental specification Temperature range Casing class 3. Mechanical specification Dimensions. (W x H x D) Mechanical outline Weight RF connectors
MHz MHz MHz s dB dB MHz kHz MHz MHz MHz dB dBm dBm/carrier dB dBm dB V AC W
17.4 x 20.9 x 6.9 440 x 530 x 175 See Standard Low 46 21 N-type female
Inches mm lbs Kg
Product
AR2200_001 AR2200_901
Description
Low Band High Band
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-07
AR2200/001-201 F
Fil/file
PRODUCT SPECIFICATION
AR2200_001_F.doc
Specification of a Band selective Repeater 1800 MHz, Lower band Product Number: AR2200/001
1. Electrical specification (typical values) The repeater complies with the requirements of ETS 300 609-4 Frequency band Up link Frequency band Down link Duplex spacing Absolute group delay Antenna isolation supervision Filter bandwidth (remotely adjustable) Filter setting resolution Gain adjustment range (in 1 dB steps) Gain (max variation 25 to +55 C) Selectivity BW 3 dB Selectivity BW 45 dB Selectivity BW 50 dB Pass band ripple Output power, PEP Output power 2 carrier Automatic gain control Noise figure at 85 dB gain, 25 C (typical) Maximum input power (non-destructive) Receiver input port return loss Power supply voltage (default) Power consumption, max 2. Environmental specification Temperature range Casing class 3. Mechanical specification Dimensions. (W x H x D) Mechanical outline Weight RF connectors 17.4 x 20.9 x 6.9 440 x 530 x 175 See Standard Low 46 21 N-type female Inches mm lbs Kg -25 to + 55 C -13 to +131 F IP65 1710 1765 1805 - 1860 95 <6 Continuously 0.5 - 16.9 25 45-85 6 16.9 BW3 dB + 1.2 BW3 dB + 2.2 6 + 32 + 26 Implemented 6 +13 14 230 160 MHz MHz MHz s MHz KHz dB dB MHz MHz MHz dB dBm dBm/carrier dB dBm dB V AC W
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-07
AR2200/901-201 F
Fil/file
PRODUCT SPECIFICATION
AR2200_901_F.doc
Specification of a Band selective Repeater 1800 MHz, Upper band Product Number: AR2200/901
1. Electrical specification (typical values) The repeater complies with the requirements of ETS 300 609-4 Frequency band Up link Frequency band Down link Duplex spacing Absolute group delay Antenna isolation supervision Filter bandwidth (remotely adjustable) Filter setting resolution Gain adjustment range (in 1 dB steps) Gain (max variation 25 to +55 C Selectivity BW 3 dB Selectivity BW 45 dB Selectivity BW 50 dB Pass band ripple Output power, PEP Output power 2 carrier Automatic gain control Noise figure at 85 dB gain, 25 C (typical) Maximum input power (non-destructive) Receiver input port return loss Power supply voltage (default) Power consumption, max 2. Environmental specification Temperature range Casing class 3. Mechanical specification Dimensions. (W x H x D) Mechanical outline Weight RF connectors 17.4 x 20.9 x 6.9 440 x 530 x 175 See Standard Low 46 21 N-type female Inches mm lbs Kg -25 to + 55 C -13 to +131 F IP65 1730 1785 1825 - 1880 95 <6 Continuously 0.5 - 16.9 25 45-85 6 16.9 BW3 dB + 1.2 BW3 dB + 2.2 6 + 32 + 26 Implemented 6 +13 14 230 160 MHz MHz MHz s MHz KHz dB dB MHz MHz MHz dB dBm dBm/carrier dB dBm dB V AC W
Product
AR3400_001 AR3400_901
Description
Low Band High Band
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-07
AR3400/001-201 E
Fil/file
PRODUCT SPECIFICATION
AR3400_001_E.doc
Specification of a band selective repeater 1900 MHz version, Lower band Product number: AR3400/001
1. Electrical specification (typical value) The repeater complies with the FCC requirements Frequency band Up link Frequency band Down link Duplex spacing Absolute group delay Antenna isolation supervision Filter bandwidth (remotely adjustable) Filter setting resolution Gain adjustment range (in 1 dB steps) Gain (max variation 25 to +55 C) Selectivity BW3 dB Selectivity BW 45 dB Selectivity BW 50 dB Passband ripple Max output power Output power 2 carrier Automat gain control Noise figure at 85 dB gain, 25 C (typical) Maximum input power (non-destructive) Receiver input port return loss Power supply voltage (default) Power consumption, nom. (max) 1850 1890 1930 1970 80 <6 Continuously 0.5 16.9 25 45-85 6 16.9 BW3 dB + 1.2 BW3 dB + 2.2 6 + 36 + 30 Implemented 6 +13 14 115 130 MHz MHz MHz s MHz KHz dB dB MHz MHz MHz dB dBm dBm dB dBm dB V AC W
2. Environmental specification Temperature range Casing class 3. Mechanical specification Dimensions. (W x H x D) Mechanical outline Weight RF connectors
17.4 x 20.9 x 6.9 440 x 530 x 175 See Standard Low 46 21 N-type female
Inches mm lbs Kg
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-07
AR3400/901-201 E
Fil/file
PRODUCT SPECIFICATION
AR3400_901_E.doc
Specification of a band selective repeater 1900 MHz version, Upper band Product number: AR3400/901
1. Electrical specification (typical values) The repeater complies with FCC requirements Frequency band Up link Frequency band Down link Duplex spacing Absolute group delay Antenna isolation supervision Filter bandwidth (remotely adjustable) Filter setting resolution Gain adjustment range (in 1 dB steps) Gain (max variation 25 to +55 C) Selectivity BW 3 dB Selectivity BW 45 dB Selectivity BW 50 dB Pass band ripple Max output power Output power 2 carrier Automat gain control Noise figure at 85 dB gain, 25 C (typical) Maximum input power (non-destructive) Receiver input port return loss Power supply voltage (default) Power consumption, nom. (max) 2. Environmental specification Temperature range Casing class 3. Mechanical specification Dimensions. (W x H x D) Mechanical outline Weight RF connectors 1870 1910 1950 - 1990 80 <6 Continuously 0.5 - 16.9 25 45-85 6 16.9 BW3 dB + 1.2 BW3 dB + 2.2 6 + 36 + 30 Implemented 6 +13 14 115 130 MHz MHz MHz s MHz KHz dB dB MHz MHz MHz dB dBm dBm dB dBm dB VAC W
17.4 x 20.9 x 6.9 440 x 530 x 175 See Standard Low 46 21 N-type female
Inches mm lbs Kg
Product
AR4500_0014 AR4500_0514 AR4540_0514 AR4200_012
Description
2 Channel 2 Channel, MRX 2 Channel, High Power, MRX Band selective, 25 MHz
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-16
AR4500/0014-201 B
Fil/file
AR4500_0014_B.doc
Specification of a CDMA 800 channel selective repeater 2-channel version, standard Product Number: AR4500/0014
1. Electrical specification (typical values) The repeater complies with the requirements of FCC Frequency band Reverse link Frequency band Forward link Number of channels Duplex spacing Gain adjustment range (1 dB steps) Gain variation in temperature Absolute group delay Output power, RMS, one carrier Output power RMS, two carrier Max out of band spurious emission Automatic gain control Selectivity 615 kHz Selectivity 885 kHz Pass band ripple Noise figure at 85 dB gain, 25 C (typical) Maximum input power (non-destructive) Receiver input port return loss Antenna isolation supervision and regulation Antenna VSWR supervision Power supply voltage (default) Power consumption, max 2. Environmental specification Temperature range Casing class 3. Mechanical specification Dimensions. (W x H x D) Mechanical outline Weight RF connectors 17.4 x 20.9 x 6.9 440 x 530 x 175 See Standard Low 46 21 N-type female Inches mm lbs Kg -25 to + 55 C -13 to +131 F IP65 824 - 849 869 - 894 2 45 60-90 <4 <6 +33 +28 -13 Implemented > -3 < -50 3 3,5 +13 14 No No 115 160 MHz MHz MHz dB dB s dBm dBm/carrier dBm dB dB dB dB dBm dB
V AC W
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-16
AR4500/0514-201 B
Fil/file
AR4500_0514_B.doc
Specification of a CDMA 800 channel selective repeater 2-channel version, standard with MRX Product Number: AR4500/0514
1. Electrical specification (typical values) The repeater complies with the requirements of FCC Frequency band Reverse link Frequency band Forward link Number of channels Duplex spacing Gain adjustment range (1 dB steps) Gain variation in temperature Absolute group delay Output power, RMS, one carrier Output power RMS, two carrier Max out of band spurious emission Automatic gain control Selectivity 615 kHz Selectivity 885 kHz Pass band ripple Noise figure at 85 dB gain, 25 C (typical) Maximum input power (non-destructive) Receiver input port return loss Antenna isolation supervision and regulation Antenna VSWR supervision Power supply voltage (default) Power consumption, max 2. Environmental specification Temperature range Casing class 3. Mechanical specification Dimensions. (W x H x D) Mechanical outline Weight RF connectors 17.4 x 20.9 x 6.9 440 x 530 x 175 See Standard Low 46 21 N-type female Inches mm lbs Kg -25 to + 55 C -13 to +131 F IP65 824 - 849 869 - 894 2 45 60-90 <4 <6 +33 +28 -13 Implemented > -3 < -50 3 3,5 +13 14 Yes (MRX) Yes (MRX) 115 160 MHz MHz MHz dB dB s dBm dBm/carrier dBm dB dB dB dB dBm dB
V AC W
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-16
AR4540/0514201
Fil/file
AR4540_0514_B.doc
Specification of a CDMA 800 channel selective repeater 2-channel version, High Power with MRX Product Number: AR4540/0514
1. Electrical specification (typical values) The repeater complies with the requirements of FCC Frequency band Reverse link Frequency band Forward link Number of channels Duplex spacing Gain adjustment range (1 dB steps), DL Gain adjustment range (1 dB steps), UL Gain variation in temperature Absolute group delay Output power, RMS, one carrier Forward Output power RMS, two carrier Forward Output power, RMS, one carrier Reverse Output power RMS, two carrier Reverse Max out of band spurious emission Automatic gain control Selectivity 615 kHz Selectivity 885 kHz Pass band ripple Noise figure at 85 dB gain, 25 C (typical) Maximum input power (non-destructive) Receiver input port return loss Antenna isolation supervision and regulation Antenna VSWR supervision Power supply voltage (default) Power consumption, max 2. Environmental specification Temperature range Casing class 3. Mechanical specification Dimensions. (W x H x D) Mechanical outline Weight RF connectors -25 to + 55 C -13 to +131 F IP65 824 - 849 869 - 894 2 45 65-95 60-90 <4 <6 +38 +33 +33 +28 -13 Implemented > -3 < -50 3 3,5 +13 14 Yes (MRX) Yes (MRX) 115 320 MHz MHz MHz dB dB dB s dBm dBm/carrier dBm dBm/carrier dBm dB dB dB dB dBm dB
V AC W
17.4 x 20.9 x 9.5 440 x 530 x 240 See Standard High 75 34 N-type female
Inches mm lbs Kg
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-16
AR4200/012-201 C
Fil/file
AR4200_012_C.doc
Specification of a Band selective Repeater CDMA 800 MHz, 25 MHz BW version Product Number: AR4200/012
1. Electrical specification (typical values) The repeater complies with the requirements of FCC Frequency band Reverse link Frequency band Forward link Duplex spacing Absolute group delay Gain adjustment range (1 dB steps) Gain (max variation 25 to +55 C) Antenna isolation supervision Filter band width (remotely adjustable) Filter setting resolution Selectivity BW 3dB Selectivity BW 35dB Selectivity BW 45dB Pass band ripple Output power RMS, one carrier, DL Output power RMS, one carrier, UL Output power RMS, two carrier, DL Output power RMS, two carrier, UL Max out of band spurious emission Automatic gain control Noise figure at 85 dB gain, 25 C (typical) Maximum input power (non-destructive) Receiver input port return loss Power supply voltage Power consumption, max 2. Environmental specification Temperature range Casing class 3. Mechanical specification Dimensions. (W x H x D) Mechanical outline Weight RF connectors
824 - 849 869 - 894 45 <6 45-85 6 Continuously 0.5-25 25 25 BW 3dB + 1.2 BW 3dB + 2.2 6 +33 +30 +28 +25 -13 Implemented 4 +13 14 115 160
MHz MHz MHz s dB dB MHz kHz MHz MHz MHz dB dBm dBm dBm/carrier dBm/carrier dBm dB dBm dB V AC W
17.4 x 20.9 x 6.9 440 x 530 x 175 See Standard Low 46 21 N-type female
Inches mm lbs Kg
Product
AR1100_002 AR1100_004 AR1111_006 AR1111_008
Description
2 Channel 4 Channel 6 Channel 8 Channel
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-10
AR1100/002-201 E
Fil/file
PRODUCT SPECIFICATION
AR1100_002_E.doc
Specification of a GSM 900 channel selective repeater 2-channel version Product Number: AR1100/002
1. Electrical specification (typical values) The repeater complies with the requirements of ETS 300 609-4 Frequency band Up link Frequency band Down link Number of channels Duplex spacing Absolute group delay Gain adjustment range (1 dB steps) Gain (max variation 25 to +55 C) Antenna isolation supervision Group delay variation within any 100KHz segment in the pass band Output power per channel Automatic gain control Selectivity 100KHz Selectivity 400KHz Selectivity 600KHz Selectivity 1 MHz Selectivity 5 MHz Pass band ripple Noise figure at 85 dB gain, 25 C (typical) Maximum input power (non-destructive) Receiver input port return loss Power supply voltage (default) Power consumption, max 2. Environmental specification Temperature range Casing class 2. Mechanical specification Dimensions. (W x H x D) Mechanical outline Weight RF connectors 890 - 915 935 - 960 2 45 <5 50-90 4 Continuously < 200 +33 Implemented > -3 < -35 < -45 < -50 < -60 3 5 +13 14 230 85 MHz MHz MHz s dB dB ns dBm dB dB dB dB dB dB dB dBm dB V AC W
17.4 x 20.9 x 6.9 440 x 530 x 175 See Standard Low 46 21 N-type female
Inches mm lbs Kg
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-10
AR1100/004-201 E
Fil/file
PRODUCT SPECIFICATION
AR1100_004_E.doc
Specification of a GSM 900 channel selective repeater 4-channel version Product Number: AR1100/004
1. Electrical specification (typical values) The repeater complies with the requirements of ETS 300 609-4 Frequency band Up link Frequency band Down link Number of channels Duplex spacing Gain adjustment range (1 dB steps) Gain (max variation 25 to +55 C) Absolute group delay Group delay variation within any 100KHz segment in the pass band Output power per channel Automatic gain control Antenna isolation supervision Selectivity 100KHz Selectivity 400KHz Selectivity 600KHz Selectivity 1 MHz Selectivity 5 MHz Pass band ripple Noise figure at 85 dB gain, 25 C (typical) Maximum input power (non-destructive) Receiver input port return loss Power supply voltage (default) Power consumption, max 2. Environmental specification Temperature range Casing class 3. Mechanical specification Dimensions. (W x H x D) Mechanical outline Weight RF connectors 890 - 915 935 - 960 4 45 50-90 4 <5 < 200 +30 Implemented Continuously > -3 < -35 < -45 < -50 < -60 3 5 +13 14 230 155 MHz MHz MHz dB dB s ns dBm
dB dB dB dB dB dB dB dBm dB V AC W
17.4 x 20.9 x 6.9 440 x 530 x 175 See Standard Low 46 21 N-type female
Inches mm lbs Kg
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-10
AR1111/006-201 E
Fil/file
PRODUCT SPECIFICATION
AR1111_006_E.doc
Specification of a GSM 900 channel selective repeater 6-channel version Product Number: AR1111/006
1. Electrical specification (typical values) The repeater complies with the requirements of ETS 300 609-4 Frequency band Up link Frequency band Down link Number of channels Duplex spacing Gain adjustment range (1 dB steps) Gain (max variation 25 to +55 C) Absolute group delay Group delay variation within any 100KHz segment in the pass band Output power per channel Automatic gain control Antenna isolation supervision Selectivity 100KHz Selectivity 400KHz Selectivity 600KHz Selectivity 1 MHz Selectivity 5 MHz Pass band ripple Noise figure at 85 dB gain, 25 C (typical) Maximum input power (non-destructive) Receiver input port return loss Power supply voltage (default) Power consumption, max 2. Environmental specification Temperature range Casing class 3. Mechanical specification Dimensions. (W x H x D) Mechanical outline Weight RF connectors 890 - 915 935 - 960 6 45 50-90 4 <5 < 200 +27 Implemented Continuously > -3 < -35 < -45 < -50 < -60 3 5 +13 14 230 230 MHz MHz MHz dB dB s ns dBm
dB dB dB dB dB dB dB dBm dB V AC W
17.4 x 20.9 x 9.6 440 x 530 x 240 See Standard High 75 34 N-type female
Inches mm lbs Kg
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-10
AR1111/008-201 E
Fil/file
PRODUCT SPECIFICATION
AR1111_008_E.doc
Specification of a GSM 900 channel selective repeater 8-channel version Product Number: AR1111/008
1. Electrical specification (typical values) The repeater complies with the requirements of ETS 300 609-4 Frequency band Up link Frequency band Down link Number of channels Duplex spacing Gain adjustment range (1 dB steps) Gain (max variation 25 to +55 C) Absolute group delay Group delay variation within any 100KHz segment in the pass band Output power per channel Automatic gain control Antenna isolation supervision Selectivity 100KHz Selectivity 400KHz Selectivity 600KHz Selectivity 1 MHz Selectivity 5 MHz Pass band ripple Noise figure at 85 dB gain, 25 C (typical) Maximum input power (non-destructive) Receiver input port return loss Power supply voltage (default) Power consumption, max 2. Environmental specification Temperature range Casing class 3. Mechanical specification Dimensions. (W x H x D) Mechanical outline Weight RF connectors 890 - 915 935 - 960 8 45 50-90 4 <5 < 200 +27 Implemented Continuously > -3 < -35 < -45 < -50 < -60 3 5 +13 14 230 305 MHz MHz MHz dB dB s ns dBm
dB dB dB dB dB dB dB dBm dB V AC W
17.4 x 20.9 x 9.6 440 x 530 x 240 See Standard High 75 34 N-type female
Inches mm lbs Kg
Product
AR2100_002 AR2100_004 AR2100_902 AR2100_904 AR2121_006 AR2121_008 AR2121_906 AR2121_908
Description
2 Channel, Low Band 4 Channel, Low Band 2 Channel, High Band 4 Channel, High Band 6 Channel, Low Band 8 Channel, Low Band 6 Channel, High Band 8 Channel, High Band
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-10
AR2100/002-201 E
Fil/file
PRODUCT SPECIFICATION
AR2100_002_E.doc
Specification of a GSM 1800 channel selective repeater 2-channel version, Lower band Product Number: AR2100/002
1. Electrical specification (typical values) The repeater complies with the requirements of ETS 300609-4 Frequency band Up link Frequency band Down link Number of channels Duplex spacing Gain adjustment range (1 dB steps) Gain (max variation 25 to +55 C) Absolute group delay Group delay variation within any 100KHz segment in the pass band Output power per channel Automatic gain control Antenna isolation supervision Selectivity 100KHz Selectivity 400KHz Selectivity 600KHz Selectivity 1MHz Selectivity 5MHz Pass band ripple Noise figure at 85 dB gain, 25 C (typical) Maximum input power (non-destructive) Receiver input port return loss Power supply voltage (default) Power consumption, max 2. Environmental specification Temperature range Casing class 3. Mechanical specification Dimensions. (W x H x D) Mechanical outline Weight RF connectors 1710 - 1765 1805 - 1860 2 95 50-90 4 <5 < 200 +33 Implemented Continuously > -3 < -35 < -45 < -50 < -60 3 5 +13 14 230 85 MHz MHz MHz dB dB s ns dBm
dB dB dB dB dB dB dB dBm dB V AC W
17.4 x 20.9 x 6.9 440 x 530 x 175 See Standard Low 46 21 N-type female
Inches mm lbs Kg
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-10
AR2100/004-201 E
Fil/file
PRODUCT SPECIFICATION
AR2100_004_E.doc
Specification of a GSM 1800 channel selective repeater 4-channel version, Lower band Product Number: AR2100/004
1. Electrical specification (typical values) The repeater complies with the requirements of ETS 300609-4 Frequency band Up link Frequency band Down link Number of channels Duplex spacing Gain adjustment range (1 dB steps) Gain (max variation 25 to +55C) Absolute group delay Group delay variation within any 100KHz segment in the pass band Output power per channel Automatic gain control Antenna isolation supervision Selectivity 100KHz Selectivity 400KHz Selectivity 600KHz Selectivity 1MHz Selectivity 5MHz Pass band ripple Noise figure at 85 dB gain, 25 C (typical) Maximum input power (non-destructive) Receiver input port return loss Power supply voltage (default) Power consumption, max 2. Environmental specification Temperature range Casing class 3. Mechanical specification Dimensions. (W x H x D) Mechanical outline Weight RF connectors 1710 - 1765 1805 - 1860 4 95 50-90 4 <5 < 200 +30 Implemented Continuously > -3 < -35 < -45 < -50 < -60 3 5 +13 14 230 155 MHz MHz MHz dB dB s ns dBm
dB dB dB dB dB dB dB dBm dB V AC W
17.4 x 20.9 x 6.9 440 x 530 x 175 See Standard Low 46 21 N-type female
Inches mm lbs Kg
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-10
AR2100/902-201 E
Fil/file
PRODUCT SPECIFICATION
AR2100_902_E.doc
Specification of a GSM 1800 channel selective repeater 2-channel version, Upper band Product Number: AR2100/902
1. Electrical specification (typical values) The repeater complies with the requirements of ETS 300609-4 Frequency band Up link Frequency band Down link Number of channels Duplex spacing Gain adjustment range (1 dB steps) Gain (max variation 25 to +55 C) Absolute group delay Group delay variation within any 100KHz segment in the pass band Output power per channel Automatic gain control Antenna isolation supervision Selectivity 100KHz Selectivity 400KHz Selectivity 600KHz Selectivity 1MHz Selectivity 5MHz Pass band ripple Noise figure at 85 dB gain, 25 C (typical) Maximum input power (non-destructive) Receiver input port return loss Power supply voltage (default) Power consumption, max 2. Environmental specification Temperature range Casing class 3. Mechanical specification Dimensions. (W x H x D) Mechanical outline Weight RF connectors 1730 1785 1825 1880 2 95 50-90 4 <5 < 200 +33 Implemented Continuously > -3 < -35 < -45 < -50 < -60 3 5 +13 14 230 85 MHz MHz MHz dB dB s ns dBm
dB dB dB dB dB dB dB dBm dB V AC W
17.4 x 20.9 x 6.9 440 x 530 x 175 See Standard Low 46 21 N-type female
Inches mm lbs Kg
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-10
AR2100/904-201 E
Fil/file
PRODUCT SPECIFICATION
AR2100_904_E.doc
Specification of a GSM 1800 channel selective repeater 4-channel version, Upper band Product Number: AR2100/904
1. Electrical specification (typical values) The repeater complies with the requirements of ETS 300609-4 Frequency band Up link Frequency band Down link Number of channels Duplex spacing Gain adjustment range (1 dB steps) Gain (max variation 25 to +55 C) Absolute group delay Group delay variation within any 100KHz segment in the pass band Output power per channel Automatic gain control Antenna isolation supervision Selectivity 100KHz Selectivity 400KHz Selectivity 600KHz Selectivity 1MHz Selectivity 5MHz Pass band ripple Noise figure at 85 dB gain, 25 C (typical) Maximum input power (non-destructive) Receiver input port return loss Power supply voltage (default) Power consumption, max 2. Environmental specification Temperature range Casing class 3. Mechanical specification Dimensions. (W x H x D) Mechanical outline Weight RF connectors 1730 1785 1825 1880 4 95 50-90 4 <5 < 200 +30 Implemented Continuously > -3 < -35 < -45 < -50 < -60 3 5 +13 14 230 155 MHz MHz MHz dB dB s ns dBm
dB dB dB dB dB dB dB dBm dB V AC W
17.4 x 20.9 x 6.9 440 x 530 x 175 See Standard Low 46 21 N-type female
Inches mm lbs Kg
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-10
AR2121/006-201 E
Fil/file
PRODUCT SPECIFICATION
AR2121_006_E.doc
Specification of a GSM 1800 channel selective repeater 6-channel version, Lower band Product Number: AR2121/006
1. Electrical specification (typical values) The repeater complies with the requirements of ETS 300609-4 Frequency band Up link Frequency band Down link Number of channels Duplex spacing Gain adjustment range (1 dB steps) Gain (max variation 25 to +55 C) Absolute group delay Group delay variation within any 100KHz segment in the pass band Output power per channel Automatic gain control Antenna isolation supervision Selectivity 100KHz Selectivity 400KHz Selectivity 600KHz Selectivity 1MHz Selectivity 5MHz Pass band ripple Noise figure at 85 dB gain, 25 C (typical) Maximum input power (non-destructive) Receiver input port return loss Power supply voltage (default) Power consumption, max 2. Environmental specification Temperature range Casing class 3. Mechanical specification Dimensions. (W x H x D) Mechanical outline Weight RF connectors 1710 - 1765 1805 - 1860 6 95 50-90 4 <5 < 200 +27 Implemented Continuously > -3 < -35 < -45 < -50 < -60 3 5 +13 14 230 230 MHz MHz MHz dB dB s ns dBm
dB dB dB dB dB dB dB dBm dB V AC W
17.4 x 20.9 x 9.6 440 x 530 x 240 See Standard High 75 34 N-type female
Inches mm lbs Kg
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-10
AR2121/008-201 E
Fil/file
PRODUCT SPECIFICATION
AR2121_008_E.doc
Specification of a GSM 1800 channel selective repeater 8-channel version, Lower band Product Number: AR2121/008
1. Electrical specification (typical values) The repeater complies with the requirements of ETS 300609-4 Frequency band Up link Frequency band Down link Number of channels Duplex spacing Gain adjustment range (1 dB steps) Gain (max variation 25 to +55 C) Absolute group delay Group delay variation within any 100KHz segment in the pass band Output power per channel Automatic gain control Antenna isolation supervision Selectivity 100KHz Selectivity 400KHz Selectivity 600KHz Selectivity 1MHz Selectivity 5MHz Pass band ripple Noise figure at 85 dB gain, 25 C (typical) Maximum input power (non-destructive) Receiver input port return loss Power supply voltage (default) Power consumption, max 2. Environmental specification Temperature range Casing class 3. Mechanical specification Dimensions. (W x H x D) Mechanical outline Weight RF connectors 1710 - 1765 1805 - 1860 8 95 50-90 4 <5 < 200 +27 Implemented Continuously > -3 < -35 < -45 < -50 < -60 3 5 +13 14 230 305 MHz MHz MHz dB dB s ns dBm
dB dB dB dB dB dB dB dBm dB V AC W
17.4 x 20.9 x 9.6 440 x 530 x 240 See Standard High 75 34 N-type female
Inches mm lbs Kg
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-10
AR2121/906-201 E
Fil/file
PRODUCT SPECIFICATION
AR2121_906_E.doc
Specification of a GSM 1800 channel selective repeater 6-channel version, Upper band Product Number: AR2121/906
1. Electrical specification (typical values) The repeater complies with the requirements of ETS 300609-4 Frequency band Up link Frequency band Down link Number of channels Duplex spacing Gain adjustment range (1 dB steps) Gain (max variation 25 to +55 C) Absolute group delay Group delay variation within any 100KHz segment in the pass band Output power per channel Automatic gain control Antenna isolation supervision Selectivity 100KHz Selectivity 400KHz Selectivity 600KHz Selectivity 1MHz Selectivity 5MHz Pass band ripple Noise figure at 85 dB gain, 25 C (typical) Maximum input power (non-destructive) Receiver input port return loss Power supply voltage (default) Power consumption, max 2. Environmental specification Temperature range Casing class 3. Mechanical specification Dimensions. (W x H x D) Mechanical outline Weight RF connectors 1730 1785 1825 1880 6 95 50-90 4 <5 < 200 +27 Implemented Continuously > -3 < -35 < -45 < -50 < -60 3 5 +13 14 230 230 MHz MHz MHz dB dB s ns dBm
dB dB dB dB dB dB dB dBm dB V AC W
17.4 x 20.9 x 9.6 440 x 530 x 240 See Standard High 75 34 N-type female
Inches mm lbs Kg
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-10
AR2121/908-201 E
Fil/file
PRODUCT SPECIFICATION
AR2121_908_E.doc
Specification of a GSM 1800 channel selective repeater 8 channel version, Upper band Product Number: AR2121/908
1. Electrical specification (typical values) The repeater complies with the requirements of ETS 300609-4 Frequency band Up link Frequency band Down link Number of channels Duplex spacing Gain adjustment range (1 dB steps) Gain (max variation 25 to +55 C) Absolute group delay Group delay variation within any 100KHz segment in the pass band Output power per channel Automatic gain control Antenna isolation supervision Selectivity 100KHz Selectivity 400KHz Selectivity 600KHz Selectivity 1MHz Selectivity 5MHz Pass band ripple Noise figure at 85 dB gain, 25 C (typical) Maximum input power (non-destructive) Receiver input port return loss Power supply voltage (default) Power consumption, max 2. Environmental specification Temperature range Casing class 3. Mechanical specification Dimensions. (W x H x D) Mechanical outline Weight RF connectors 1730 1785 1825 1880 8 95 50-90 4 <5 < 200 +27 Implemented Continuously > -3 < -35 < -45 < -50 < -60 3 5 +13 14 230 305 MHz MHz MHz dB dB s ns dBm
dB dB dB dB dB dB dB dBm dB V AC W
17.4 x 20.9 x 9.6 440 x 530 x 240 See Standard High 75 34 N-type female
Inches mm lbs Kg
Product
AR3100_002 AR3100_004 AR3100_902 AR3100_904 AR3131_006 AR3131_008 AR3131_906 AR3131_908
Description
2 Channel, Low Band 4 Channel, Low Band 2 Channel, High Band 4 Channel, High Band 6 Channel, Low Band 8 Channel, Low Band 6 Channel, High Band 8 Channel, High Band
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-10
AR3100/002-201 E
Fil/file
PRODUCT SPECIFICATION
AR3100_002_E.doc
Specification of a GSM 1900 channel selective repeater 2-channel version, Lower band Product Number: AR3100/002
1. Electrical specification (typical values) The repeater complies with the FCC requirements Frequency band Up link Frequency band Down link Number of channels Duplex spacing Gain adjustment range (1 dB steps) Gain (max variation 25 to +55 C) Absolute group delay Group delay variation within any 100KHz segment in the pass band Output power per channel Automatic gain control Antenna isolation supervision Selectivity 100KHz Selectivity 400KHz Selectivity 600KHz Selectivity 1MHz Selectivity 5MHz Pass band ripple Noise figure at 85 dB gain, 25 C (typical) Maximum input power (non-destructive) Receiver input port return loss Power supply voltage (default) Power consumption, max 2. Environmental specification Temperature range Casing class 3. Mechanical specification Dimensions. (W x H x D) Mechanical outline Weight RF connectors 17.4 x 20.9 x 6.9 440 x 530 x 175 See Standard Low 46 21 N-type female Inches mm lbs Kg 1850 -1890 1930 - 1970 2 80 50-90 4 <5 < 200 +33 Implemented Continuously > -3 < -35 < -45 < -50 < -60 3 5 +13 14 115 85 MHz MHz MHz dB dB s ns dBm
dB dB dB dB dB dB dB dBm dB V AC W
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-10
AR3100/004-201 E
Fil/file
PRODUCT SPECIFICATION
AR3100_004_E.doc
Specification of a GSM 1900 channel selective repeater 4-channel version, Lower band Product Number: AR3100/004
1. Electrical specification (typical values) The repeater complies with the FCC requirements Frequency band Up link Frequency band Down link Number of channels Duplex spacing Gain adjustment range (1 dB steps) Gain (max variation 25 to +55 C) Absolute group delay Group delay variation within any 100KHz segment in the pass band Output power per channel Automatic gain control Antenna isolation supervision Selectivity 100KHz Selectivity 400KHz Selectivity 600KHz Selectivity 1MHz Selectivity 5MHz Pass band ripple Noise figure at 85 dB gain, 25 C (typical) Maximum input power (non-destructive) Receiver input port return loss Power supply voltage (default) Power consumption, max 2. Environmental specification Temperature range Casing class 3. Mechanical specification Dimensions. (W x H x D) Mechanical outline Weight RF connectors 1850 -1890 1930 - 1970 4 80 50-90 4 <5 < 200 +30 Implemented Continuously > -3 < -35 < -45 < -50 < -60 3 5 +13 14 115 155 MHz MHz MHz dB dB s ns dBm
dB dB dB dB dB dB dB dBm dB V AC W
17.4 x 20.9 x 6.9 440 x 530 x 175 See Standard Low 46 21 N-type female
Inches mm lbs Kg
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-10
AR3100/902-201 E
Fil/file
PRODUCT SPECIFICATION
AR3100_902_E.doc
Specification of a GSM 1900 channel selective repeater 2-channel version, High band Product Number: AR3100/902
1. Electrical specification (typical values) The repeater complies with the FCC requirements Frequency band Up link Frequency band Down link Number of channels Duplex spacing Gain adjustment range (1 dB steps) Gain (max variation 25 to +55 C) Absolute group delay Group delay variation within any 100KHz segment in the pass band Output power per channel Automatic gain control Antenna isolation supervision Selectivity 100KHz Selectivity 400KHz Selectivity 600KHz Selectivity 1MHz Selectivity 5MHz Pass band ripple Noise figure at 85 dB gain, 25 C (typical) Maximum input power (non-destructive) Receiver input port return loss Power supply voltage (default) Power consumption, max 2. Environmental specification Temperature range Casing class 3. Mechanical specification Dimensions. (W x H x D) Mechanical outline Weight RF connectors 1870 1910 1950 - 1990 2 80 50-90 4 <5 < 200 +33 Implemented Continuously > -3 < -35 < -45 < -50 < -60 3 5 +13 14 115 85 MHz MHz MHz dB dB s ns dBm
dB dB dB dB dB dB dB dBm dB V AC W
17.4 x 20.9 x 6.9 440 x 530 x 175 See Standard Low 46 21 N-type female
Inches mm lbs Kg
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-10
AR3100/904-201 E
Fil/file
PRODUCT SPECIFICATION
AR3100_904_E.doc
Specification of a GSM 1900 channel selective repeater 4-channel version, High band Product Number: AR3100/904
1. Electrical specification (typical values) The repeater complies with the FCC requirements Frequency band Up link Frequency band Down link Number of channels Duplex spacing Gain adjustment range (1 dB steps) Gain (max variation 25 to +55 C) Absolute group delay Group delay variation within any 100KHz segment in the pass band Output power per channel Automatic gain control Antenna isolation supervision Selectivity 100KHz Selectivity 400KHz Selectivity 600KHz Selectivity 1MHz Selectivity 5MHz Pass band ripple Noise figure at 85 dB gain, 25 C (typical) Maximum input power (non-destructive) Receiver input port return loss Power supply voltage (default) Power consumption, max 2. Environmental specification Temperature range Casing class 3. Mechanical specification Dimensions. (W x H x D) Mechanical outline Weight RF connectors 1870 1910 1950 - 1990 4 80 50-90 4 <5 < 200 +30 Implemented Continuously > -3 < -35 < -45 < -50 < -60 3 5 +13 14 115 155 MHz MHz MHz dB dB s ns dBm
dB dB dB dB dB dB dB dBm dB V AC W
17.4 x 20.9 x 6.9 440 x 530 x 175 See Standard Low 46 21 N-type female
Inches mm lbs Kg
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-10
AR3131/006-201 E
Fil/file
PRODUCT SPECIFICATION
AR3131_006_E.doc
Specification of a GSM 1900 channel selective repeater 6-channel version, Lower band Product Number: AR3131/006
1. Electrical specification (typical values)
The repeater complies with the FCC requirements Frequency band Up link Frequency band Down link Number of channels Duplex spacing Gain adjustment range (1 dB steps) Gain (max variation 25 to +55 C) Absolute group delay Group delay variation within any 100KHz segment in the pass band Output power per channel Automatic gain control Antenna isolation supervision Selectivity 100KHz Selectivity 400KHz Selectivity 600KHz Selectivity 1MHz Selectivity 5MHz Pass band ripple Noise figure at 85 dB gain, 25 C (typical) Maximum input power (non-destructive) Receiver input port return loss Power supply voltage (default) Power consumption, max 2. Environmental specification Temperature range Casing class 3. Mechanical specification Dimensions. (W x H x D) Mechanical outline Weight RF connectors 1850 -1890 1930 - 1970 6 80 50-90 4 <5 < 200 +27 Implemented Continuously > -3 < -35 < -45 < -50 < -60 3 5 +13 14 115 230 MHz MHz MHz dB dB s ns dBm
dB dB dB dB dB dB dB dBm dB V AC W
17.4 x 20.9 x 9.6 440 x 530 x 240 See Standard High 75 34 N-type female
Inches mm lbs Kg
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-10
AR3131/008-201 E
Fil/file
PRODUCT SPECIFICATION
AR3131_008_E.doc
Specification of a GSM 1900 channel selective repeater 8-channel version, Lower band Product Number: AR3131/008
1. Electrical specification (typical values) The repeater complies with the FCC requirements Frequency band Up link Frequency band Down link Number of channels Duplex spacing Gain adjustment range (1 dB steps) Gain (max variation 25 to +55 C) Absolute group delay Group delay variation within any 100KHz segment in the pass band Output power per channel Automatic gain control Antenna isolation supervision Selectivity 100KHz Selectivity 400KHz Selectivity 600KHz Selectivity 1MHz Selectivity 5MHz Pass band ripple Noise figure at 85 dB gain, 25 C (typical) Maximum input power (non-destructive) Receiver input port return loss Power supply voltage (default) Power consumption, max 2. Environmental specification Temperature range Casing class 3. Mechanical specification Dimensions. (W x H x D) Mechanical outline Weight RF connectors 1850 -1890 1930 - 1970 8 80 50-90 4 <5 < 200 +27 Implemented Continuously > -3 < -35 < -45 < -50 < -60 3 5 +13 14 115 305 MHz MHz MHz dB dB s ns dBm
dB dB dB dB dB dB dB dBm dB V AC W
17.4 x 20.9 x 9.6 440 x 530 x 240 See Standard High 75 34 N-type female
Inches mm lbs Kg
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-10
AR3131/906-201 E
Fil/file
PRODUCT SPECIFICATION
AR3131_906_E.doc
Specification of a GSM 1900 channel selective repeater 6-channel version, High band Product Number: AR3131/906
1. Electrical specification (typical values) The repeater complies with the FCC requirements Frequency band Up link Frequency band Down link Number of channels Duplex spacing Gain adjustment range (1 dB steps) Gain (max variation 25 to +55 C) Absolute group delay Group delay variation within any 100KHz segment in the pass band Output power per channel Automatic gain control Antenna isolation supervision Selectivity 100KHz Selectivity 400KHz Selectivity 600KHz Selectivity 1MHz Selectivity 5MHz Pass band ripple Noise figure at 85 dB gain, 25 C (typical) Maximum input power (non-destructive) Receiver input port return loss Power supply voltage (default) Power consumption, max 2. Environmental specification Temperature range Casing class 3. Mechanical specification Dimensions. (W x H x D) Mechanical outline Weight RF connectors 1870 1910 1950 - 1990 6 80 50-90 4 <5 < 200 +27 Implemented Continuously > -3 < -35 < -45 < -50 < -60 3 5 +13 14 115 230 MHz MHz MHz dB dB s ns dBm
dB dB dB dB dB dB dB dBm dB V AC W
17.4 x 20.9 x 9.6 440 x 530 x 240 See Standard High 75 34 N-type female
Inches mm lbs Kg
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-10
AR3131/908201 E
Fil/file
PRODUCT SPECIFICATION
AR3131_908_E.doc
Specification of a GSM 1900 channel selective repeater 8-channel version, High band Product Number: AR3131/908
1. Electrical specification (typical values) The repeater complies with the FCC requirements Frequency band Up link Frequency band Down link Number of channels Duplex spacing Gain adjustment range (1 dB steps) Gain (max variation 25 to +55 C) Absolute group delay Group delay variation within any 100KHz segment in the pass band Output power per channel Automatic gain control Antenna isolation supervision Selectivity 100KHz Selectivity 400KHz Selectivity 600KHz Selectivity 1MHz Selectivity 5MHz Pass band ripple Noise figure at 85 dB gain, 25 C (typical) Maximum input power (non-destructive) Receiver input port return loss Power supply voltage (default) Power consumption, max 2. Environmental specification Temperature range Casing class 3. Mechanical specification Dimensions. (W x H x D) Mechanical outline Weight RF connectors 1870 1910 1950 - 1990 6 80 50-90 4 <5 < 200 +27 Implemented Continuously > -3 < -35 < -45 < -50 < -60 3 5 +13 14 115 305 MHz MHz MHz dB dB s ns dBm
dB dB dB dB dB dB dB dBm dB V AC W
17.4 x 20.9 x 9.6 440 x 530 x 240 See Standard High 75 34 N-type female
Inches mm lbs Kg
Product
AR3500_001 AR3500_901 AR3530_001 AR3530_051 AR3530_901 AR3530_951 AR3535_022 AR3535_922 AR3400_011 AR3400_911
Description
2 Channel, Low Band 2 Channel, High Band 2 Channel, Low Band, High Power 2 Channel, Low Band, High Power, MRX 2 Channel, High Band, High Power 2 Channel, High Band, High Power, MRX 4 Channel, Low Band, 2+2 4 Channel, High Band, 2+2 Band selective, Low band Band selective, High band
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-07
AR3500/001-201 H
Fil/file
PRODUCT SPECIFICATION
AR3500_001_H.doc
Specification of a CDMA 1900 channel selective repeater 2-channel version, Lower band Product number: AR3500/001
1. Electrical specification (typical values) The repeater complies with FCC requirements Frequency band Reverse link Frequency band Forward link Number of channels Duplex spacing Gain adjustment range (1 dB steps) Gain (max variation 25 to +55 C) Absolute group delay Output power, RMS, one carrier Output power RMS, two carrier Automatic gain control Selectivity 615 kHz Selectivity 885 kHz Pass band ripple Noise figure at 85 dB gain, 25 C (typical) Maximum input power (non-destructive) Receiver input port return loss Power supply voltage (default) Power consumption, max 2. Environmental specification Temperature range Casing class 3. Mechanical specification Dimensions. (W x H x D) Mechanical outline Weight RF connectors 17.4 x 20.9 x 6.9 440 x 530 x 175 See Standard Low 46 21 N-type female Inches mm lbs Kg -25 to + 55 C -13 to +131 F IP65 1850 -1890 1930 - 1970 2 80 50-90 4 <5 +33 +27 Implemented > -3 < -50 3 5 +13 14 115 160 MHz MHz MHz dB dB s dBm dBm/carrier dB dB dB dB dBm dB V AC W
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-07
AR3500/901-201 H
Fil/file
PRODUCT SPECIFICATION
AR3500_901_H.doc
Specification of a CDMA 1900 channel selective repeater 2-channel version, Upper band Product number: AR3500/901
1. Electrical specification (typical value) The repeater complies with FCC requirements Frequency band Reverse link Frequency band Forward link Number of channels Duplex spacing Gain adjustment range (1 dB steps) Gain (max variation 25 to +55 C) Absolute group delay Output power, RMS, one carrier Output power RMS, two carrier Automatic gain control Selectivity 615 kHz Selectivity 885 kHz Pass band ripple Noise figure at 85 dB gain, 25 C (typical) Maximum input power (non-destructive) Receiver input port return loss Power supply voltage (default) Power consumption, max 2. Environmental specification Temperature range Casing class 3. Mechanical specification Dimensions. (W x H x D) Mechanical outline Weight RF connectors 1870 1910 1950 - 1990 2 80 50-90 4 <6 +33 +27 Implemented > -3 < -50 3 5 +13 14 115 320 MHz MHz MHz dB dB s dBm dBm/carrier dB dB dB dB dBm dB V AC W
17.4 x 20.9 x 6.9 440 x 530 x 175 See Standard Low 46 21 N-type female
Inches mm lbs Kg
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-07
AR3530/001-201 E
Fil/file
PRODUCT SPECIFICATION
AR3530_001_E.doc
Specification of a CDMA 1900 channel selective repeater 2-channel version, Lower band High Power Product Number: AR3530/001
1. Electrical specification (typical value) The repeater complies with FCC requirements Frequency band Reverse link Frequency band Forward link Number of channels Duplex spacing Gain adjustment range (1 dB steps) Gain (max variation 25 to +55 C) Absolute group delay Output power, RMS, one carrier Forward Output power RMS, two carrier Forward Output power, RMS, one carrier Reverse Output power RMS, two carrier Reverse Max out of band spurious emission Automatic gain control Selectivity 615 kHz Selectivity 885 kHz Pass band ripple Noise figure at 85 dB gain, 25 C (typical) Maximum input power (non-destructive) Receiver input port return loss Antenna isolation supervision and regulation Antenna VSWR supervision Power supply voltage (default) Power consumption, max 2. Environmental specification Temperature range Casing class 3. Mechanical specification Dimensions. (W x H x D) Mechanical outline Weight RF connectors 1850 1890 1930 - 1970 2 80 50-90 4 <6 +38 +33 +33 +28 -13 Implemented > -3 < -50 3 5 +13 14 MRX receiver implemented MRX receiver implemented 115 320 MHz MHz MHz dB dB s dBm dBm/carrier dBm dBm/carrier dBm dB dB dB dB dBm dB
V AC W
17.4 x 20.9 x 9.5 440 x 530 x 240 See Standard High 75 34 N-type female
Inches mm lbs Kg
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-07
AR3530/051-201 C
Fil/file
PRODUCT SPECIFICATION
AR3530_051_C.doc
Specification of a CDMA 1900 channel selective repeater 2-channel version, Lower band High Power, MRX Product Number: AR3530/051
1. Electrical specification (typical values) The repeater complies with the requirements to FCC Frequency band Reverse link Frequency band Forward link Number of channels Duplex spacing Gain adjustment range (1 dB steps) UL Gain adjustment range (1 dB steps) DL Gain (max variation 25 to +55 C) Absolute group delay Output power, RMS, one carrier Forward Output power RMS, two carrier Forward Output power, RMS, one carrier Reverse Output power RMS, two carrier Reverse Max out of band spurious emission Automatic gain control Selectivity 615 kHz Selectivity 885 kHz Band pass ripple Noise figure at 85 dB gain, 25 C (typical) Maximum input power (non-destructive) Receiver input port return loss Antenna isolation supervision and regulation Antenna VSWR supervision Power supply voltage (default) Power consumption, max 2. Environmental specification Temperature range Casing class 3. Mechanical specification Dimensions. (W x H x D) Mechanical outline Weight RF connectors 1850 1890 1930 - 1970 2 80 50-90 60-100 4 <6 +38 +33 +33 +28 -13 Implemented > -3 < -50 3 5 +13 14 MRX receiver implemented MRX receiver implemented 115 320 MHz MHz MHz dB dB dB s dBm dBm/carrier dBm dBm/carrier dBm dB dB dB dB dBm dB
V AC W
17.4 x 20.9 x 9.5 440 x 530 x 240 See Standard High 75 34 N-type female
Inches mm lbs Kg
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-07
AR3530/951-201 C
Fil/file
PRODUCT SPECIFICATION
AR3530_951_C.doc
Specification of a CDMA 1900 channel selective repeater 2-channel version, Upper band High Power, MRX Product Number: AR3530/951
1. Electrical specification (typical values) The repeater complies with the requirements to FCC Frequency band Reverse link Frequency band Forward link Number of channels Duplex spacing Gain adjustment range (1 dB steps) UL Gain adjustment range (1 dB steps) DL Gain (max variation 25 to +55 C) Absolute group delay Output power, RMS, one carrier Forward Output power RMS, two carrier Forward Output power, RMS, one carrier Reverse Output power RMS, two carrier Reverse Max out of band spurious emission Automatic gain control Selectivity 615 kHz Selectivity 885 kHz Pass band ripple Noise figure at 85 dB gain, 25 C (typical) Maximum input power (non-destructive) Receiver input port return loss Antenna isolation supervision and regulation Antenna VSWR supervision Power supply voltage (default) Power consumption, max 2. Environmental specification Temperature range Casing class 3. Mechanical specification Dimensions. (W x H x D) Mechanical outline Weight RF connectors 1870 1910 1950 - 1990 2 80 50-90 60-100 4 <6 +38 +33 +33 +28 -13 Implemented > -3 < -50 3 5 +13 14 MRX receiver implemented MRX receiver implemented 115 320 MHz MHz MHz dB dB dB s dBm dBm/carrier dBm dBm/carrier dBm dB dB dB dB dBm dB
V AC W
17.4 x 20.9 x 9.6 440 x 530 x 240 See Standard High 75 34 N-type female
Inches mm lbs Kg
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-16
AR3535/022-201 D
Fil/file
PRODUCT SPECIFICATION
AR3535_022_D.doc
Specification of a CDMA 1900 channel selective repeater 4-channel version, Lower band Product Number: AR3535/022
True 2+2 CDMA channels in one package The antenna connections 2+2 channels can either be combined (3dB loss) or separated
1. Electrical specification (typical values) The repeater complies with the requirements to FCC Frequency band Reverse link Frequency band Forward link Number of channels Duplex spacing Gain adjustment range (1 dB steps) Gain (max variation 25 to +55 C) Absolute group delay Output power, RMS, two carrier (no combiner) Output power RMS, four carrier (no combiner) Max out of band spurious emission Automatic gain control Selectivity 615 kHz Selectivity 885 kHz Pass band ripple Noise figure at 85 dB gain, 25 C (typical) Maximum input power (non-destructive) Receiver input port return loss Power supply voltage (default) Power consumption, max 2. Environmental specification Temperature range Casing class 3. Mechanical specification Dimensions. (W x H x D) Mechanical outline Weight RF connectors Lock type 1850 -1890 1930 - 1970 4 80 50-90 4 <6 +33 +28 -13 Implemented > -3 < -50 3 5 +13 14 115 320 MHz MHz MHz dB dB s dBm dBm/carrier dBm dB dB dB dB dBm dB V AC W
17.4 x 20.9 x 9.6 440 x 530 x 240 See Standard High 75 34 N-type female ABLOY
Inches mm lbs Kg
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-07
AR3535/922-201 D
Fil/file
PRODUCT SPECIFICATION
AR3535_922_D.doc
Specification of a CDMA 1900 channel selective repeater 4-channel version, Upper band Product Number: AR3535/922
True 2+2 CDMA channels in one package The antenna connections 2+2 channels can either be combined (3dB loss) or separated
1. Electrical specification (typical values) The repeater complies with the requirements to FCC Frequency band Reverse link Frequency band Forward link Number of channels Duplex spacing Gain adjustment range (1 dB steps) Gain (max variation 25 to +55 C) Absolute group delay Output power, RMS, two carrier (no combiner) Output power RMS, four carrier (no combiner) Max out of band spurious emission Automatic gain control Selectivity 615 kHz Selectivity 885 kHz Pass band ripple Noise figure at 85 dB gain, 25 C (typical) Maximum input power (non-destructive) Receiver input port return loss Power supply voltage (default) Power consumption, max 2. Environmental specification Temperature range Casing class 3. Mechanical specification Dimensions. (W x H x D) Mechanical outline Weight RF connectors 1870 -1910 1950 - 1990 4 80 50-90 4 <6 +33 +28 -13 Implemented > -3 < -50 3 5 +13 14 115 320 MHz MHz MHz dB dB s dBm dBm/carrier dBm dB dB dB dB dBm dB V AC W
17.4 x 20.9 x 9.5 440 x 530 x 240 See Standard High 75 34 N-type female
Inches mm lbs Kg
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-07
AR3400/011-201 D
Fil/file
PRODUCT SPECIFICATION
AR3400_011_D.doc
Specification of a band selective repeater CDMA 1900 MHz version, Lower band Product number: AR3400/011
1. Electrical specification (typical value) The repeater complies with the FCC requirements Frequency band Reverse link Frequency band Forward link Duplex spacing Absolute group delay Antenna isolation supervision Filter bandwidth (remotely adjustable) Filter setting resolution Gain adjustment range (in 1 dB steps) Gain (max variation 25 to +55 C) Selectivity BW 3 dB Selectivity BW 45 dB Selectivity BW 50 dB Passband ripple Output power RMS, one carrier, DL Output power RMS, one carrier, UL Output power RMS, two carrier, DL Output power RMS, two carrier, UL Automatic gain control Noise figure at 85 dB gain, 25 C (typical) Maximum input power (non-destructive) Receiver input port return loss Power supply voltage (default) Power consumption, max 1850 1890 1930 1970 80 <6 Continuously 0.5 16.9 25 45-85 6 16.9 BW3 dB + 1.2 BW3 dB + 2.2 6 + 33 +30 + 28 +25 Implemented 5 +13 14 115 160 MHz MHz MHz s MHz KHz dB dB MHz MHz MHz dB dBm dBm dBm dBm dB dBm dB V AC W
2. Environmental specification Temperature range Casing class 3. Mechanical specification Dimensions. (W x H x D) Mechanical outline Weight RF connectors
17.4 x 20.9 x 6.9 440 x 530 x 175 See Standard Low 46 21 N-type female
Inches mm lbs Kg
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-12
AR3400/901-201 D
Fil/file
PRODUCT SPECIFICATION
AR3400_911_D.doc
Specification of a band selective repeater CDMA 1900 MHz version, Upper band Product number: AR3400/911
1. Electrical specification (typical values) The repeater complies with FCC requirements Frequency band Reverse link Frequency band Forward link Duplex spacing Absolute group delay Antenna isolation supervision Filter bandwidth (remotely adjustable) Filter setting resolution Gain adjustment range (in 1 dB steps) Gain (max variation 25 to +55 C) Selectivity BW 3 dB Selectivity BW 45 dB Selectivity BW 50 dB Pass band ripple Output power RMS, one carrier, DL Output power RMS, one carrier, UL Output power RMS, two carrier, DL Output power RMS, two carrier, UL Automatic gain control Noise figure at 85 dB gain, 25 C (typical) Maximum input power (non-destructive) Receiver input port return loss Power supply voltage (default) Power consumption, max 2. Environmental specification Temperature range Casing class 3. Mechanical specification Dimensions. (W x H x D) Mechanical outline Weight RF connectors 1870 1910 1950 - 1990 80 <6 Continuously 0.5 - 16.9 25 45-85 6 16.9 BW3 dB + 1.2 BW3 dB + 2.2 6 + 33 + 30 + 28 + 25 Implemented 5 +13 14 115 160 MHz MHz MHz s MHz KHz dB dB MHz MHz MHz dB dBm dBm dBm dBm dB dBm dB VAC W
17.4 x 20.9 x 6.9 440 x 530 x 175 See Standard Low 46 21 N-type female
Inches mm lbs Kg
Product
ALR4200_001 ALR4200_002 ALR4600_001 ALR4200_011 ALR4200_012
Description
Adjustable 15 MHz BW Adjustable 25 MHz BW iDEN CDMA 15 MHz CDMA 25 MHz
Product
ALR1200_001 ALR1200_002 ALR1200_901
Description
Adjustable 15 MHz BW Adjustable 25 MHz BW EGSM, Adj. 15 MHz BW
Product
ALR2200_001 ALR2200_901
Description
Adjustable BW, Low Band Adjustable BW, High Band
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-10
ALR2200/001-201
Fil/file
PRODUCT SPECIFICATION
ALR2200-001_F.doc
COMPACT repeater with adjustable bandwidth 1800 MHz version, Low band Product Number: ALR2200/001
1. Electrical specification (typical values)
The repeater complies with the requirement of ETS 300 609-4 Frequency tuning band Up link Frequency tuning band Down link Filter bandwidth, software adjustable Filter setting resolution Duplex spacing Gain adjustment range Gain (max variation 25 to +55C) Gain step resolution Filter selectivity @ 400 kHz offset Filter selectivity @ 600 kHz offset Filter selectivity @ 1 MHz offset Output power, PEP Output power, 2 carrier Pass band ripple Max absolute group delay Noise figure at 70 dB gain, 25 C Maximum input power Receiver input port return loss Power supply voltage Power consumption 1710 1765 1805 1860 0.5 15 25 95 55-70 5 1 > 20 > 30 > 35 + 26 + 20 5 6 8 +13 14 85 - 265 55 MHz MHz MHz kHz MHz dB dB dB dB dB dB dBm dBm dB s dB dBm dB VAC W
15.2 x 15.2 x 4.3 385 x 385 x 110 See Compact Low < 22 < 10 N-type female
Inches mm lbs kg
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-10
ALR2200/901-201
Fil/file
PRODUCT SPECIFICATION
ALR2200-901_F.doc
COMPACT repeater with adjustable bandwidth 1800 MHz version, High band Product Number ALR2200/901
1. Electrical specification (typical values)
The repeater complies with the requirement of ETS 300609-4 Frequency tuning band Up link Frequency tuning band Down link Filter bandwidth, software adjustable Filter setting resolution Duplex spacing Gain adjustment range Gain (max variation 25 to +55 C) Gain step resolution Filter selectivity @ 400 kHz offset Filter selectivity @ 600 kHz offset Filter selectivity @ 1 MHz offset Output power, PEP Output power, 2 carrier Pass band ripple Max absolute group delay Noise figure at 70 dB gain, 25 C Maximum input power Receiver input port return loss Power supply voltage Power consumption 1730 1785 1825 1880 0.5 15 25 95 55-70 5 1 > 20 > 30 > 35 + 26 + 20 5 6 8 +13 14 85 - 265 55 MHz MHz MHz kHz MHz dB dB dB dB dB dB dBm dBm dB s dB dBm dB VAC W
15.2 x 15.2 x 4.3 385 x 385 x 110 See Compact Low < 22 < 10 N-type female
Inches mm lbs kg
Product
ALR3200_001 ALR3200_901 ALR3200_011 ALR3200_911
Description
Low Band High Band CDMA Low Band CDMA High Band
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-11
ALR3200/001-201
Fil/file
PRODUCT SPECIFICATION
ALR3200-001_F.doc
COMPACT repeater with adjustable bandwidth 1900 MHz version, Low band Product Number: ALR3200/001
1. Electrical specification (typical values)
The repeater complies with the requirements of FCC Frequency tuning band Up link Frequency tuning band Down link Filter bandwidth, software adjustable Filter setting resolution Duplex spacing Gain adjustment range Gain (max variation 25 to +55 C) Gain step resolution Filter selectivity @ 400 kHz offset Filter selectivity @ 600 kHz offset Filter selectivity @ 1 MHz offset Output power, PEP Output power, 2 carrier Pass band ripple Max absolute group delay Noise figure at 70 dB gain, 25 C Maximum input power Receiver input port return loss Power supply voltage Power consumption 1850 1890 1930 1970 0.5 15 25 80 55-70 5 1 > 20 > 30 > 35 + 28 + 22 5 6 8 +13 14 85 - 265 55 MHz MHz MHz kHz MHz dB dB dB dB dB dB dBm dBm dB s dB dBm dB VAC W
15.2 x 15.2 x 4.3 385 x 385 x 110 See Compact Low < 22 < 10 N-type female
Inches mm lbs kg
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-11
ALR3200/901-201
Fil/file
PRODUCT SPECIFICATION
ALR3200-901_F.doc
COMPACT repeater with adjustable bandwidth 1900 MHz version, High band Product Number: ALR3200/901
1. Electrical specification (typical values)
The repeater complies with the requirements of FCC Frequency tuning band Up link Frequency tuning band Down link Filter bandwidth, software adjustable Filter setting resolution Duplex spacing Gain adjustment range Gain (max variation 25 to +55 C) Gain step resolution Filter selectivity @ 400 kHz offset Filter selectivity @ 600 kHz offset Filter selectivity @ 1 MHz offset Output power, PEP Output power, 2 carrier Pass band ripple Max absolute group delay Noise figure at 70 dB gain, 25 C Maximum input power Receiver input port return loss Power supply voltage Power consumption 1870 1910 1950 1990 0.5 15 25 80 55-70 5 1 > 20 > 30 > 35 + 28 + 22 5 6 8 +13 14 85 - 265 55 MHz MHz MHz kHz MHz dB dB dB dB dB dB dBm dBm dB s dB dBm dB VAC W
15.2 x 15.2 x 4.3 385 x 385 x 110 See Compact Low < 22 < 10 N-type female Allgon Safety bolts
Inches mm lbs kg
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-07-18
ALR4200/001-201 H
Fil/file
PRODUCT SPECIFICATION
ALR4200-001_H.doc
COMPACT repeater with adjustable bandwidth 800 MHz version, 15 MHz BW Product Number: ALR4200/001
1. Electrical specification (typical value)
The repeater complies with the requirements of FCC Frequency tuning band Up link Frequency tuning band Down link Filter bandwidth standard, adjustable Filter setting resolution Duplex spacing Gain adjustment range Gain (max variation 25 to +55 C) Gain step resolution Filter selectivity @ 400 kHz offset Filter selectivity @ 600 kHz offset Filter selectivity @ 1 MHz offset Output power, PEP Output power, 2 carrier Pass band ripple Max absolute group delay Noise figure at 65 dB gain, 25 C Maximum input power Receiver input port return loss Power supply voltage Power consumption 824 849 869 - 894 0.5 15 12.5 45 55-70 5 1 > 20 > 30 > 35 + 28 + 22 5 6 8 +13 14 85 - 265 55 MHz MHz MHz kHz MHz dB dB dB dB dB dB dBm dBm dB s dB dBm dB VAC W
15.2 x 15.2 x 4.3 385 x 385 x 110 See Compact Low < 22 < 10 N-type female
Inches mm lbs kg
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-07-18
ALR4200/002-201 F
Fil/file
PRODUCT SPECIFICATION
ALR4200-002_F.doc
COMPACT repeater with adjustable bandwidth 800 MHz version, 25 MHz BW Product Number: ALR4200/002
1. Electrical specification (typical value)
The repeater complies with the requirements of FCC Frequency tuning band Up link Frequency tuning band Down link Filter bandwidth standard, adjustable Filter setting resolution Duplex spacing Gain adjustment range Gain (max variation 25 to +55 C) Gain step resolution Filter selectivity @ 400 kHz offset Filter selectivity @ 600 kHz offset Filter selectivity @ 1 MHz offset Output power, PEP Output power, 2 carrier Pass band ripple Max absolute group delay Noise figure at 65 dB gain, 25 C Maximum input power Receiver input port return loss Power supply voltage Power consumption 824 849 869 - 894 0.5 25 25 45 55-70 5 1 > 20 > 30 > 35 + 28 + 22 5 6 8 +13 14 85 - 265 55 MHz MHz MHz kHz MHz dB dB dB dB dB dB dBm dBm dB s dB dBm dB VAC W
15.2 x 15.2 x 4.3 385 x 385 x 110 See Compact Low < 22 < 10 N-type female
Inches mm lbs kg
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-11
ALR4600/001-201
Fil/file
PRODUCT SPECIFICATION
ALR4600-001_G.doc
COMPACT repeater with adjustable bandwidth 800 MHz version, iDEN/SMR, 15 MHz BW Product Number: ALR4600/001
1. Electrical specification (typical value)
The repeater complies with the requirements of FCC Frequency tuning band Up link Frequency tuning band Down link Filter bandwidth standard, adjustable Filter setting resolution Duplex spacing Gain adjustment range Gain (max variation 25 to +55 C) Gain step resolution Filter selectivity @ 400 kHz offset Filter selectivity @ 600 kHz offset Filter selectivity @ 1 MHz offset Output power, PEP Output power, 2 carrier Pass band ripple Max absolute group delay Noise figure at 65 dB gain, 25 C Maximum input power Receiver input port return loss Power supply voltage Power consumption 806 825 851 870 0.5 15 25 45 55-70 5 1 > 20 > 30 > 35 + 28 + 22 5 6 8 +13 14 85 - 265 55 MHz MHz MHz kHz MHz dB dB dB dB dB dB dBm dBm dB s dB dBm dB VAC W
15.2 x 15.2 x 4.3 385 x 385 x 110 See Compact Low < 22 < 10 N-type female Allgon Safety bolts
Inches mm lbs kg
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-11
ALR1200/001-201
Fil/file
PRODUCT SPECIFICATION
ALR1200-001_H.doc
COMPACT repeater with adjustable bandwidth 900 MHz version, 15 MHz BW Product Number: ALR1200/001
1. Electrical specification (typical values)
The repeater complies with the requirements of ETS 300 609-4 Frequency tuning band Up link Frequency tuning band Down link Filter bandwidth standard, adjustable Filter setting resolution Duplex spacing Gain adjustment range Gain (max variation 25 to +55 C) Gain step resolution Filter selectivity @ 400 kHz offset Filter selectivity @ 600 kHz offset Filter selectivity @ 1 MHz offset Output power, PEP Output power, 2 carrier Pass band ripple Max absolute group delay Noise figure at 70 dB gain, 25 C Maximum input power Receiver input port return loss Power supply voltage Power consumption 890 915 935 960 0.5 15 25 45 55-70 5 1 > 20 > 30 > 35 + 25 + 19 5 6 8 +13 14 85 - 265 55 MHz MHz MHz kHz MHz dB dB dB dB dB dB dBm dBm dB s dB dBm dB VAC W
15.2 x 15.2 x 4.3 385 x 385 x 110 See Compact Low < 22 < 10 N-type female Allgon Safety bolts
Inches mm lbs kg
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-11
ALR1200/002-201
Fil/file
PRODUCT SPECIFICATION
ALR1200-002_E.doc
COMPACT repeater with adjustable bandwidth 900 MHz version, 25 MHz BW Product Number: ALR1200/002
1. Electrical specification (typical values)
The repeater complies with the requirements of ETS 300 609-4 Frequency tuning band Up link Frequency tuning band Down link Filter bandwidth standard, adjustable Filter setting resolution Duplex spacing Gain adjustment range Gain (max variation 25 to +55 C) Gain step resolution Filter selectivity @ 400 kHz offset Filter selectivity @ 600 kHz offset Filter selectivity @ 1 MHz offset Output power, PEP Output power, 2 carrier Pass band ripple Max absolute group delay Noise figure at 70 dB gain, 25 C Maximum input power Receiver input port return loss Power supply voltage Power consumption 890 915 935 960 0.5 25 25 45 55-70 5 1 > 20 > 30 > 35 + 25 + 19 5 6 8 +13 14 85 - 265 55 MHz MHz MHz kHz MHz dB dB dB dB dB dB dBm dBm dB s dB dBm dB VAC W
15.2 x 15.2 x 4.3 385 x 385 x 110 See Compact Low < 22 < 10 N-type female Allgon Safety bolts
Inches mm lbs kg
2. Hardware & Software requirements OM-Online require a PC with capacity to run Suns Java 2 Standard Edition USEnglish version 1.4.0_02 or higher on 32-bit Windows operating system. Minimum display resolution 800x600 pixels. MS Windows NT 4.0 SP6, Windows 98 SE or Windows 2000 SP2. Access to IP-repeaters requires installation of RAS (Remote Access Service). CommServer SA102 61/1 R1A can be installed in same computer or accessible over network.
3. Alarms Internal and external alarms locally or remotely monitored - LED sum alarm presentation on repeater front - Large number of internal alarms test points, each having a fixed alarm level - Four alarm ports for external alarm connections (e.g. intruder, fire, temperature etc), each having flexible alarm level settings Settable alarm levels: q None and ceasing q Warning q Error q Critical
4. Options and facilities q Dual band. Most repeaters can be dual band configured. q R2R (Repeater to Repeater) multidrop link is an advanced feature enabling data communication between repeaters over one single remote interface (RCU) q Fiber optic kit. The repeater can easily be upgraded to a Fiber Optic Repeater by adding a Fiber Optic Unit (FOU) or a Fiber Optic Node (FON). q Remote Control. All repeaters can be remote controlled either over a fixed wireline modem or a radio modem q Battery Back-Up (BBU) for either 25 or 50 Ah battery capacity q Door-switch to be connected to external alarm input q Operation and Maintenance System (OMS). System for managing multiple repeaters in a network. Requires MS Windows NT 4.0 with Service Pack 6 or higher or MS Windows 2000 with Service Pack 2 or higher. - Single or Multiuser as options - Polling of repeater - Status interrogation - Remote configuration - Supervision of ongoing configurations of multiple repeaters - Automatic downloading of new software - Scheduling activities - Report generating - External connections over the most common IP protocols (TCP/IP, UDP, Streamsocket) - High level of inbuilt security classes
q
Power Supply. Most repeaters can be equipped with following power suppliers: q 230 VAC q 115 VAC q +24 VDC q +48 VDC
1. General
The repeater program covers all major cellular standards (GSM, AMPS/TDMA, CDMA and WCDMA). The products are formed from generic design platforms with a high grade of modularity. Mechanical housing and all essential RF electronics for the function of a repeater are standardised. Components like duplex filters and RF SAW filters are frequency specific and adopted to the different cellular standards. These few components are classified as strategic ones and are carefully selected. 2.Declaration of conformity Environmental Allgon repeater products are designed in accordance with ETS300 019: Stationary use at non-weather protected locations, extended climatic tests. Repeater AR types Institute SEMKO Concerns Encapsulation test acc. to IP65 requirements Humidity Chock Vibration Encapsulation test acc. to IP65 requirements Encapsulation Humidity Chock Vibration ETS Reference EN 60 529 Institute reference 9749086-03
AR types
Packforsk
7861
ALR types
SEMKO
0012029-04
ALR types
SEMKO
ALR types
Packforsk
UL50/CAN/CSA/CS 0012029-05 A-C22.2 No 94 NEMA Type 4 ETS 300 019-2-5, C01686 class T4.1E (prel.)
Radio Transmission and reception Allgon repeaters are designed in accordance with ETS300 577, GSM05.05: Radio transmission and reception (GSM05.05) and ETS300 609-4, part 4. Europe - Radio Transmission and Reception ETS 300 609-4 (harmonized standard ETS301 502) - EMC emission and immunity ETS 300 342-3 (Harmonized standard ETS 301 489-7) - 3GPP TS25.106 (only applicable on AR65XX models)
Allgon Products AR1100/004 CS, 230 V, GSM AR1100/004 CS, 230 V, GSM AR1100/002 CS 24/48 VDC, GSM AR1112/104 COMB, 230 V, GSM AR1100/004 CS, 230 V, Opto, GSM AR2100/004 CS, 230 V, DCS, PCN AR1100/002 CS, 230 V, GSM AR1100/904 CS, 230 V, EGSM AR2200/901 CS, 230 V, DCS,PCN AR1111/008 CS 230 V, GSM900 AR6500/001 CS, 230 V, WCDMA AR1100/804, CS,230 V, RGSM ALR2200/001, BS, 230 V, DCS, PCN ALR2200/901, BS, 230 V, DCS, PCN AR1200/052, BS, 230 V, DCS, PCN AR2100/004, CS, 230V, DCS, PCN
Accredited Laboratory reference 1381/008/95 1381/002/96 1381/004/96 1381/009/96 1381/014/97 1381/015/97 1381/016/97 1381/047/97 D000063K, 983911D 9951195R 200622 G127872H 0014109R 0014109R 9951194R 9951196R
US and Canada Relevant products fulfils the US emission requirements according to the Federal Communications Commission rule part 15, 22 and 90 and Industry of Canada specification RSS133 issue 1. Allgon Products AR3100, CS, GSM 1900 AR3400, BS, DAMPS 1900 AR3500, SS, CDMA 1900 AR4200, BS, 800 MHz AR4200, BS, 800 MHz, New PA AR4500, SS, CDMA 800 MHz AR4540, SS, CDMA800 HP AR4600, BS, 800 MHz ALR4200, BS, 800 MHz, Compact ALR4600, BS, 800 MHz, iDEN, Compact FCC ref L6GAR3100 L6GAR3400 L6GAR3500 L6GAR4200 L6GAR4200A L6GAR4500 L6GAR4540 L6GAR4600 L6GALR4200 L6GALR4600 IC ref 2869331142A 2869331138A 2869331135A 2869311169A 2869311209A 2869311191A 2869311237A 2869311189A 2869311227A 2869311226A
CS= Channel selective, BS= Band selective, SS= Segment selective, COMBI= Combinations of CS, BS and CS
EMC Standards Allgon repeaters are designed to meet European EMC Directive 89/336/EEC. Standards for Electrical equipment for Train and Marine are also fulfilled. Repeater ALR types Concerns Immunity Generic standard Emission Generic standard EMC for radio equipment BTS and repeaters BTS systems equip. repeaters Railway applications, Rolling app. Immunity to cond. disturbance Maritime nav. and radio equip. EMC Marine equip. and installations ERM/EMC GSM base stations BTS systems equip. repeaters Limits and methods of measuring EMC for radio equipment Harmonic current emissions Voltage fluctuations and flicker Electrostatic discharge requirement Radiated electromagnetic field Burst Surge Conducted disturbance Voltage dips, interrupts and variation BTS and repeaters Electrostatic discharge requirement Radiated electromagnetic field Burst Surge Conducted disturbance Voltage dips, interrupts and variation Radio freq. electromagnetic field Maritime nav. and radio equip. EMC Marine equip. and installations AR types Immunity Generic standard Emission Generic standard EMC for radio equipment BTS and repeaters BTS systems equip. repeaters Standard EN 61000-6-2 EN 61000-6-3 ETS 301 489-1 ETS 300 342-3 ETS 300 609-4 EN 50121-3-2 EN 61000-4-6 EN 60945 BS 1597 ETS 301 489-8 ETS 300 609-4 EN 55022 ETS 301 489-1 EN 61000-3-2 EN 61000-3-3 EN 61000-4-2 EN 61000-4-3 EN 61000-4-4 EN 61000-4-5 EN 61000-4-6 EN 61000-4-11 ETS 300 342-3 EN 61000-4-2 EN 61000-4-3 EN 61000-4-4 EN 61000-4-5 EN 61000-4-6 EN 61000-4-11 EN 50204 EN 60945 BS 7027 EN 61000-6-2 EN 61000-6-3 ETS 301 489-1 ETS 300 342-3 ETS 300 609-4 Reference 200435-1
0014109D
E014-TR 020094
200433-1
Harmonic current emissions Voltage fluctuations and flicker Electrostatic discharge requirement Radiated electromagnetic field Burst Surge Conducted disturbance Power freq. magnetic field Voltage dips, interrupts and variation Immunity Generic standard Emission Generic standard EMC for radio equipment BTS and repeaters BTS systems equip. repeaters Harmonic current emissions Voltage fluctuations and flicker Electrostatic discharge requirement Radiated electromagnetic field Burst Surge Conducted disturbance Power freq. magnetic field Voltage dips, interrupts and variation Maritime nav. and radio equip. EMC Marine equip. and installations Maritime nav. and radio equip. EMC Marine equip. and installations
EN 61000-3-2 EN 61000-3-3 EN 61000-4-2 EN 61000-4-3 EN 61000-4-4 EN 61000-4-5 EN 61000-4-6 EN 61000-4-8 EN 61000-4-11 EN 61000-6-2 EN 61000-6-3 ETS 301 489-1 ETS 300 342-3 ETS 300 609-4 EN 61000-3-2 EN 61000-3-3 EN 61000-4-2 EN 61000-4-3 EN 61000-4-4 EN 61000-4-5 EN 61000-4-6 EN 61000-4-8 EN 61000-4-11 EN 60945 BS 1597 EN 60945 BS 7027 200434-1
DAS types
Limits and methods of measuring Immunity Generic standard Emission Generic standard EMC for radio equipment BTS and repeaters BTS systems equip. repeaters Railway applications, Rolling app. Immunity to cond. disturbance Maritime nav. and radio equip. EMC Marine equip. and installations ERM/EMC GSM base stations BTS systems equip. repeaters
EN 55022 EN 61000-6-2 EN 61000-6-3 ETS 301 489-1 ETS 300 342-3 ETS 300 609-4 EN 50121-3-2 EN 61000-4-6 EN 60945 BS 1597 ETS 301 489-8 ETS 300 609-4
200436-1 200435-1
Limits and methods of measuring EMC for radio equipment Harmonic current emissions Voltage fluctuations and flicker Electrostatic discharge requirement Radiated electromagnetic field Burst Surge Conducted disturbance Voltage dips, interrupts and variation BTS and repeaters Electrostatic discharge requirement Radiated electromagnetic field Burst Surge Conducted disturbance Voltage dips, interrupts and variation Radio freq. electromagnetic field Maritime nav. and radio equip. EMC Marine equip. and installations
EN 55022 ETS 301 489-1 EN 61000-3-2 EN 61000-3-3 EN 61000-4-2 EN 61000-4-3 EN 61000-4-4 EN 61000-4-5 EN 61000-4-6 EN 61000-4-11 ETS 300 342-3 EN 61000-4-2 EN 61000-4-3 EN 61000-4-4 EN 61000-4-5 EN 61000-4-6 EN 61000-4-11 EN 50204 EN 60945 BS 7027 0014109D
E014-TR 020094
Fibre Optic Transceiver The Fibre Optic Transceiver (FOT/FON) is to be regarded as a sub-assembly and is solely designed to fit Allgon repeater related products and consequently not allowed to be use in other kind of stand-alone applications. The FOT/FON is working with light in 1,3m and 1,5m wavelengths and can be integrated in any kind of Allgon repeater related products without affecting the radio performances. Safety The Allgon Fibre Optic Transceivers (FOT/FON) are classified as CLASS 1 LASER PRODUCT under the condition that they are integrated in any type of enclosure. Verification notice: - IEC/EN 60 825-1 - IEC/EN 60950 2:nd edition
Radiation safety of laser products for Europe and Canada Safety of Information Technology Equipment, including Electrical Business Equipment. - US Food and Drug Administration requirements, part 1040.10, 1998 EMC The Allgon Fibre Optic Transceiver complies with EMC Directive 89/336/EEC and been tested in accordance with ETS300 342-3.
Repeater safety IEC Publication 65 ETL recognition according to UL 1950 3:rd Edition and CAN/CSA C22.2 950-95: Listing Mark ETL 2002761 2002761 2002761 2002761 2002761 2002761 2002761 2002761
Repeater type AR31xx AR34xx AR35xx AR42xx AR45xx AR46xx ALR32xx ALR42xx
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-05-14
SA102 54/1-201
Fil/file
R3A
PRODUCT SPECIFICATION
SA102 54-1-201_R3A.doc
Hardware and software requirements The hardware requirements vary depending on if the computer will be used as a server machine or as a client. Server: Intel Pentium II based computer, running at a minimum of 600 MHz 256 MB RAM, 512 MB RAM recommended 2 GB available disk space Monitor capable of displaying a resolution of 1024 x 768 (1280 x 1024 recommended) Network card and TCP/IP protocol installed Windows NT4 with service pack 6 or higher, Windows 2000 with service pack 2 or higher
Client: Intel Pentium based computer, running at a minimum of 266 MHz 128 MB RAM, 256 MB RAM recommended 600 MB available disk space Monitor capable of displaying a resolution of 1024 x 768 (1280 x 1024 recommended) Network card and TCP/IP protocol installed Windows NT4 with service pack 6 or higher, Windows 2000 with service pack 2 or higher At least one serial communication port. (Multiport serial port board (DigiPort or compatible) is strongly recommended.) Hayes compatible modems (minimum 9600 bps) for serial ports. See the Modem Init Strings section for further information about compatible modems. One telephone line or mobile phone for each modem. If callback will be used, then each telephone line must have its own designated telephone number.
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-05-14
SA102 54/1-201
Fil/file
R3A
PRODUCT SPECIFICATION
SA102 54-1-201_R3A.doc
Alarm handling Alarms are graphically displayed Logged alarms can be sorted in any order
Multimedia Concept User defined colour setting of alarm and activity levels Alarm sound can be played
Traffic statistics Querying traffic statistics for the last week Report for 7 days displayed per hour or per 15 minutes periods Graph presenting RSSI percentage value over a peak and mean average time scale Export all information to a Microsoft Excel file Storage time settable from 1 to 1000 days
Repeater activities Directly executed Scheduled executed any time or recurrent Status shows all activities in progress and COM ports used
User and Client Management Repeater Manager shows a map over a number of regions, cells and repeaters User Manager contains all the user privileges Workstation manager for OMS client organisation
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-05-14
SA102 54/1-201
Fil/file
R3A
PRODUCT SPECIFICATION
SA102 54-1-201_R3A.doc
Internal Mail System Users in the OMS can communicate with each other Individual or groups Anyone to everyone event update
Data Export Enabling export of database to a number of databases Templates Efficient configurations Template profile includes all repeater parameter settings
Reports OMS database incl. repeater configuration, user preferences and logs Printed out, displayed or saved
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2001-01-05
K118-201
Fil/file
R1B
PRODUCT SPECIFICATION
K118-201_R1B
5. Mechanical specification Dimensions. (W x H x D) Weight Optical fibre RF connectors Optical connectors Software interface RS232
1 2
230 x 25 x 115 0,66 0,3 9/125 SMA FC-APC, DIN-APC 9 pin D-sub
The Fibre Optic Transceiver is connected to a duplexfilter thus limiting useful bandwidth to cellular standard in use. RF to RF system link gain is settable from 55 to 15 dB with 1 meter fibre jumper
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2001-01-05
K118-201
Fil/file
R1B
PRODUCT SPECIFICATION
K118-201_R1B
-4 to + 167 -20 to + 75
F C
5. Operation The Fibre Optic Transceiver (FOT) is to be regarded as a modular component and is solely designed to fit Allgon repeaters and Base Station master Units and consequently not possible to use in other standalone applications. The FOT is a generic product for all types of Allgon repeaters. 6. Hardware & Software requirements The FOT is controlled by specific Fibre Optic Operation Terminal (FOOT) software requiring at least: - 486 desktop or notebook - Windows 95, 98 or NT version 4.0 or higher 7. Alarms A summery alarm is generated by the FOT. The alarm connection is of an open collector type, open in normal mode and closed upon a failure. The summery alarm includes following individual alarms (accessible from FOOT software) - Laser failure (Tx) - No optic power received (Rx) - Temperature - Internal voltage 8. Declaration of conformity - Environmental specification - EMC emission and immunity - Electrical safety ETS300 019-2-4 ETS300 342-3 IEC/EN 60825-1 IEC/EN 60950
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2002-06-11
K129/1_201
Fil/file
R1B
PRODUCT SPECIFICATION
K129-201_R1B.doc
mm Lbs kg
1
2
The Fibre Optic Node is connected to a duplexfilter thus limiting useful bandwidth to cellular standard in use. RF to RF system link gain is settable from 60 to 20 dB with 1 meter fibre jumper
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2002-06-11
K129/1_201
Fil/file
R1B
PRODUCT SPECIFICATION
Optical fibre RF connectors Optical connectors Software interface RS232
K129-201_R1B.doc 9/125 SMA FC-APC, DIN-APC 9 pin D-sub Single mode Others available
-4 to + 167 -20 to + 75
F C
5. Operation The Fibre Optic Node (FON) is to be regarded as a modular component and is solely designed to fit Allgon repeaters and Base Station master Units and consequently not possible to use in other standalone applications. The FON is a generic product for all types of Allgon repeaters. 5,5. New Features Built-in input power meter (optic meter) Optical output power, software controlled, two levels IP addressing Settable alarm thresholds (two levels) Sub carrier for data communication Battery Back-up with charger External alarm inputs with settable levels and polarity R2R interface RCC support Remote software download 6. Hardware & Software The FON is locally/remotely controlled by standard Allgon Operation & Maintenance Terminal Software (OMT) and Operation & Management System (OMS). 7. Alarms The FON supervision and alarm handling is built identical to our repeater products, e.g. fully compatible with OMT and OMS. Following alarms are given from FON: Laser failure (Tx) No optic power received (Rx) Temperature Internal voltage Sub carrier link supervision External alarm
8. Declaration of conformity - Environmental specification - EMC emission and immunity - Electrical safety
Product
AR1100_902 AR1100_904 AR1111_906 AR1111_908
Description
2 Channel 4 Channel 6 Channel 8 Channel
Description
2 Channel 4 Channel
Product
AR1200_952
Description
16,5 MHz BW
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-07
AR1200/952-201 F
Fil/file
AR1200_952_F.doc
STANDARD Band selective Repeater EGSM 900 MHz, 16,9 MHz BW Product Number: AR1200/952
1. Electrical specification (typical values) The repeater complies with the requirements of ETS 300 609-4 Frequency band Up link 880 - 915 Frequency band Down link 925 - 960 Duplex spacing 45 Absolute group delay <6 Gain adjustment range (1 dB steps) 45-85 6 Gain (max variation -25 to +55 C) Antenna isolation supervision Continuously Filter band width (remotely adjustable) 0.5-16.9 Filter setting resolution 25 Automatic gain control Implemented Selectivity BW 3dB 16.9 Selectivity BW 45dB BW 3dB + 1.2 Selectivity BW 50dB BW 3dB + 2.2 Pass band ripple 6 Output power, PEP +29 Output power 2 carrier +23 6 Noise figure at 85 dB gain, 25 C (typical) Maximum input power (non-destructive) +13 Receiver input port return loss 14 Power supply voltage (default) 230 Power consumption, max 160 2. Environmental specification Temperature range Casing class 3. Mechanical specification Dimensions. (W x H x D) Mechanical outline Weight RF connectors
Note! Approx. 1 dB more Pass band ripple when EGSM+GSM band is utilized.
MHz MHz MHz s dB dB MHz kHz MHz MHz MHz dB dBm dBm/carrier dB dBm dB V AC W
17.4 x 20.9 x 6.9 440 x 530 x 175 See Standard Low 46 21 N-type female
Inches mm lbs Kg
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-10
AR1100/902-201 B
Fil/file
PRODUCT SPECIFICATION
AR1100_902_B.doc
Specification of a EGSM 900 channel selective repeater 2-channel version Product Number: AR1100/902
1. Electrical specification (typical values) The repeater complies with the requirements of ETS 300 609-4 Frequency band Up link Frequency band Down link Number of channels Duplex spacing Absolute group delay Gain adjustment range (1 dB steps) Gain (max variation 25 to +55 C) Antenna isolation supervision Group delay variation within any 100KHz segment in the pass band Output power per channel Automatic gain control Selectivity 100KHz Selectivity 400KHz Selectivity 600KHz Selectivity 1 MHz Selectivity 5 MHz Pass band ripple Noise figure at 85 dB gain, 25 C (typical) Maximum input power (non-destructive) Receiver input port return loss Power supply voltage (default) Power consumption, max 2. Environmental specification Temperature range Casing class 2. Mechanical specification Dimensions. (W x H x D) Mechanical outline Weight RF connectors 880 - 915 925 - 960 2 45 <5 50-90 4 Continuously < 200 +33 Implemented > -3 < -35 < -45 < -50 < -60 3 5 +13 14 230 85 MHz MHz MHz s dB dB ns dBm dB dB dB dB dB dB dB dBm dB V AC W
17.4 x 20.9 x 6.9 440 x 530 x 175 See Standard Low 46 21 N-type female
Inches mm lbs Kg
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-10
AR1100/904-201 B
Fil/file
PRODUCT SPECIFICATION
AR1100_904_B.doc
Specification of a EGSM 900 channel selective repeater 4-channel version Product Number: AR1100/904
1. Electrical specification (typical values) The repeater complies with the requirements of ETS 300 609-4 Frequency band Up link Frequency band Down link Number of channels Duplex spacing Absolute group delay Gain adjustment range (1 dB steps) Gain (max variation 25 to +55 C) Antenna isolation supervision Group delay variation within any 100KHz segment in the pass band Output power per channel Automatic gain control Selectivity 100KHz Selectivity 400KHz Selectivity 600KHz Selectivity 1 MHz Selectivity 5 MHz Pass band ripple Noise figure at 85 dB gain, 25 C (typical) Maximum input power (non-destructive) Receiver input port return loss Power supply voltage (default) Power consumption, max 2. Environmental specification Temperature range Casing class 3. Mechanical specification Dimensions. (W x H x D) Mechanical outline Weight RF connectors 880 - 915 925 - 960 4 45 <5 50-90 4 Continuously < 200 +30 Implemented > -3 < -35 < -45 < -50 < -60 3 5 +13 14 230 155 MHz MHz MHz s dB dB ns dBm dB dB dB dB dB dB dB dBm dB V AC W
17.4 x 20.9 x 6.9 440 x 530 x 175 See Standard Low 46 21 N-type female
Inches mm lbs Kg
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-10
AR1111/906-201 B
Fil/file
PRODUCT SPECIFICATION
AR1111_906_B.doc
Specification of an EGSM 900 channel selective repeater 6-channel version Product Number: AR1111/906
1. Electrical specification (typical values) The repeater complies with the requirements of ETS 300 609-4 Frequency band Up link Frequency band Down link Number of channels Duplex spacing Gain adjustment range (1 dB steps) Gain (max variation 25 to +55 C) Absolute group delay Group delay variation within any 100KHz segment in the pass band Output power per channel Automatic gain control Antenna isolation supervision Selectivity 100KHz Selectivity 400KHz Selectivity 600KHz Selectivity 1 MHz Selectivity 5 MHz Pass band ripple Noise figure at 85 dB gain, 25 C (typical) Maximum input power (non-destructive) Receiver input port return loss Power supply voltage (default) Power consumption, max 2. Environmental specification Temperature range Casing class 3. Mechanical specification Dimensions. (W x H x D) Mechanical outline Weight RF connectors Lock type 880 - 915 925 - 960 6 45 50-90 4 <5 < 200 +27 Implemented Continuously > -3 < -35 < -45 < -50 < -60 3 5 +13 14 230 230 MHz MHz MHz dB dB s ns dBm
dB dB dB dB dB dB dB dBm dB V AC W
17.4 x 20.9 x 9.6 440 x 530 x 240 See Standard High 75 34 N-type female ABLOY
Inches mm lbs Kg
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-10
AR1111/908-201 A
Fil/file
AR1111_908_B.doc
Specification of a EGSM 900 channel selective repeater 8-channel version Product Number: AR1111/908
1. Electrical specification (typical values) The repeater complies with the requirements of ETS 300 609-4 Frequency band Up link Frequency band Down link Number of channels Duplex spacing Absolute group delay Gain adjustment range (1 dB steps) Gain (max variation 25 to +55 C) Antenna isolation supervision Group delay variation within any 100KHz segment in the pass band Output power per channel Automatic gain control Selectivity 100KHz Selectivity 400KHz Selectivity 600KHz Selectivity 1 MHz Selectivity 5 MHz Pass band ripple Noise figure at 85 dB gain, 25 C (typical) Maximum input power (non-destructive) Receiver input port return loss Power supply voltage (default) Power consumption, max 2. Environmental specification Temperature range Casing class 3.Mechanical specification Dimensions. (W x H x D) Mechanical outline Weight RF connectors 880 - 915 925 - 960 8 45 <5 50-90 4 Continuously < 200 +27 Implemented > -3 < -35 < -45 < -50 < -60 3 5 +13 14 230 305 MHz MHz MHz s dB dB ns dBm dB dB dB dB dB dB dB dBm dB V AC W
17.4 x 20.9 x 9.6 440 x 530 x 240 See Standard High 75 34 N-type female
Inches mm lbs Kg
Product
ALR1212_001 ALR1212_002 ALR1212_901 ALR2212_001 ALR2212_901 ALR2222_001 ALR2222_095 ALR2222_501 ALR2222_901 ALR3232_001 ALR3232_901 ALR3242_001 ALR4242_002
Description
BS900/BS900 15 MHz BW BS900/BS900 25 MHz BW BS900/E-GSM 15 MHz BW BS1800/BS900 LB 15 MHz BW BS1800/BS900 UB 15 MHz BW BS1800/BS1800 LB 15 MHz BW BS1800/BS1800 LB/UB 15 MHz BW BS1800/BS1800 LB 25/15 MHz BW BS1800/BS1800 UB 15 MHz BW BS1900/BS1900 LB 15 MHz BW BS1900/BS1900 UB 15 MHz BW BS1900/BS800 LB 15 MHz BW BS800/BS800 15 MHz BW
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-07-18
ALR1212/001-201 D
Fil/file
ALR1212-001_D.doc
COMPACT repeater with adjustable bandwidth 900/900 MHz version Product Number: ALR1212/001
1. Electrical specification (typical values) GSM900 Bottom The repeater complies with the requirements of ETS 300 609-4 Frequency tuning band Up link Frequency tuning band Down link Filter bandwidth standard, adjustable Filter setting resolution Duplex spacing Gain adjustment range Gain (max variation 25 to +55 C) Gain step resolution Filter selectivity @ 400 kHz offset Filter selectivity @ 600 kHz offset Filter selectivity @ 1 MHz offset Output power, PEP* Output power, 2 carrier* Pass band ripple Max absolute group delay Noise figure at 70 dB gain, 25 C Maximum input power Receiver input port return loss Power supply voltage Power consumption 890 915 935 960 0.5 15 25 45 55-70 5 1 > 20 > 30 > 35 + 22 + 16 5 6 8 +13 14 85 - 265 < 55 MHz MHz MHz kHz MHz dB dB dB dB dB dB dBm dBm dB s dB dBm dB V AC W
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-07-18
ALR1212/001-201 D
Fil/file
ALR1212-001_D.doc
2. Electrical specification (typical values) GSM900 Door The repeater complies with the requirements of ETS 300 609-4 Frequency tuning band Up link Frequency tuning band Down link Filter bandwidth standard, adjustable Filter setting resolution Duplex spacing Gain adjustment range Gain (max variation 25 to +55 C) Gain step resolution Filter selectivity @ 400 kHz offset Filter selectivity @ 600 kHz offset Filter selectivity @ 1 MHz offset Output power, PEP* Output power, 2 carrier* Pass band ripple Max absolute group delay Noise figure at 70 dB gain, 25 C Maximum input power Receiver input port return loss Power supply voltage Power consumption 890 915 935 960 0.5 15 25 45 55-70 5 1 > 20 > 30 > 35 + 22 + 16 5 6 8 +13 14 85 - 265 < 55 MHz MHz MHz kHz MHz dB dB dB dB dB dB dBm dBm dB s dB dBm dB V AC W
3. Environmental specification Temperature range Casing class 4. Mechanical specification Dimensions. (W x H x D) Mechanical outline Weight RF connectors Lock type
*Hybrid combiner makes -3 dB less output power
15.2 x 15.2 x 6.3 385 x 385 x 159,5 See Compact High < 44 < 20 N-type female Allgon Safety bolts
Inches mm lbs kg
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-07-18
ALR1212/002-201 D
Fil/file
ALR1212-002_D.doc
COMPACT repeater with adjustable bandwidth BS900/BS900 25 MHz BW Product Number: ALR1212/002
1. Electrical specification (typical values) GSM900 Bottom The repeater complies with the requirements of ETS 300 609-4 Frequency tuning band Up link Frequency tuning band Down link Filter bandwidth standard, adjustable Filter setting resolution Duplex spacing Gain adjustment range Gain (max variation 25 to +55 C) Gain step resolution Filter selectivity @ 400 kHz offset Filter selectivity @ 600 kHz offset Filter selectivity @ 1 MHz offset Output power, PEP* Output power, 2 carrier* Pass band ripple Max absolute group delay Noise figure at 70 dB gain, 25 C Maximum input power Receiver input port return loss Power supply voltage Power consumption 890 915 890 915 0.5 25 25 45 55-70 5 1 > 20 > 30 > 35 + 22 + 16 5 6 8 +13 14 85 - 265 < 55 MHz MHz MHz kHz MHz dB dB dB dB dB dB dBm dBm dB s dB dBm dB V AC W
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-07-18
ALR1212/002-201 D
Fil/file
ALR1212-002_D.doc
2. Electrical specification (typical values) GSM900 Door The repeater complies with the requirements of ETS 300 609-4 Frequency tuning band Up link Frequency tuning band Down link Filter bandwidth standard, adjustable Filter setting resolution Duplex spacing Gain adjustment range Gain (max variation 25 to +55 C) Gain step resolution Filter selectivity @ 400 kHz offset Filter selectivity @ 600 kHz offset Filter selectivity @ 1 MHz offset Output power, PEP* Output power, 2 carrier* Pass band ripple Max absolute group delay Noise figure at 70 dB gain, 25 C Maximum input power Receiver input port return loss Power supply voltage Power consumption 890 915 890 915 0.5 25 25 45 55-70 5 1 > 20 > 30 > 35 + 22 + 16 5 6 8 +13 14 85 - 265 < 55 MHz MHz MHz kHz MHz dB dB dB dB dB dB dBm dBm dB s dB dBm dB V AC W
3. Environmental specification Temperature range Casing class 4. Mechanical specification Dimensions. (W x H x D) Mechanical outline Weight RF connectors Lock type
*Hybrid combiner makes -3 dB less output power
15.2 x 15.2 x 6.3 385 x 385 x 159,5 See Compact High < 44 < 20 N-type female Allgon Safety bolts
Inches mm lbs kg
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-12
ALR1212/901-201
Fil/file
ALR1212-901_E.doc
COMPACT repeater with adjustable bandwidth 900 GSM/E-GSM Product Number: ALR1212/901
1. Electrical specification (typical values) 900 GSM
The repeater complies with the requirements of ETS 300 609-4 Frequency tuning band Up link Frequency tuning band Down link Filter bandwidth standard, adjustable Filter setting resolution Duplex spacing Gain adjustment range Gain (max variation 25 to +55 C) Gain step resolution Filter sensitivity @ 400 kHz offset Filter sensitivity @ 600 kHz offset Filter sensitivity @ 1 MHz offset Output power, PEP Output power, 2 carrier Pass band ripple Max absolute group delay Noise figure at 65 dB gain, 25 C Maximum input power Receiver input port return loss Power supply voltage Power consumption 890 915 935 960 0.5 15 25 45 45-70 5 1 > 20 > 30 > 35 > + 22 + 16 5 6 8 +13 14 85 - 265 < 55 MHz MHz MHz kHz MHz dB dB dB dB dB dB dBm dBm dB s dB dBm dB V AC W
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-12
ALR1212/901-201
Fil/file
ALR1212-901_E.doc
15.2 x 15.2 x 6.3 385 x 385 x 159.5 See Compact High < 44 < 20 N-type female Allgon Safety bolts
Inches mm lbs kg
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-12
ALR2212/001-201
Fil/file
ALR2212-001_C.doc
COMPACT repeater with adjustable bandwidth 1800/900 MHz version, Low band Product Number: ALR2212/001
1. Electrical specification (typical values) 1800 MHz Low Band
The repeater complies with the requirement of ETS 300 609-4 Frequency tuning band Up link Frequency tuning band Down link Filter bandwidth, software adjustable Filter setting resolution Duplex spacing Gain adjustment range Gain (max variation 25 to +55C) Gain step resolution Filter selectivity @ 400 kHz offset Filter selectivity @ 600 kHz offset Filter selectivity @ 1 MHz offset Output power, PEP Output power, 2 carrier Pass band ripple Max absolute group delay Noise figure at 70 dB gain, 25 C Maximum input power Receiver input port return loss Power supply voltage Power consumption 1710 1765 1805 1860 0.5 15 25 95 55-70 5 1 > 20 > 30 > 35 + 26 + 20 5 6 8 +13 14 85 - 265 55 MHz MHz MHz kHz MHz dB dB dB dB dB dB dBm dBm dB s dB dBm dB VAC W
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-12
ALR2212/001-201
Fil/file
ALR2212-001_C.doc
15.2 x 15.2 x 6.3 385 x 385 x 159,5 See Compact High < 44 < 20 N-type female Allgon Safety bolts
Inches mm lbs kg
If common donor and service antennas are used, diplexers are installed in the repeater.
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-12
ALR2212/901-201
Fil/file
ALR2212-901_C.doc
COMPACT repeater with adjustable bandwidth 1800/900 MHz version, High band Product Number: ALR2212/901
1. Electrical specification (typical values) 1800 MHz High Band
The repeater complies with the requirement of ETS 300609-4 Frequency tuning band Up link Frequency tuning band Down link Filter bandwidth, software adjustable Filter setting resolution Duplex spacing Gain adjustment range Gain (max variation 25 to +55 C) Gain step resolution Filter sensitivity @ 400 kHz offset Filter sensitivity @ 600 kHz offset Filter sensitivity @ 1 MHz offset Output power, PEP Output power, 2 carrier Pass band ripple Max absolute group delay Noise figure at 70 dB gain, 25 C Maximum input power Receiver input port return loss Power supply voltage Power consumption 1730 1785 1825 1880 0.5 15 25 95 55-70 5 1 > 20 > 30 > 35 + 26 + 20 5 6 8 +13 14 85 - 265 <55 MHz MHz MHz kHz MHz dB dB dB dB dB dB dBm dBm dB s dB dBm dB VAC W
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-12
ALR2212/901-201
Fil/file
ALR2212-901_C.doc
15,2 x 15,2 x 6,3 385 x 385 x 159,5 See Compact High < 44 < 20 N-type female Allgon Safety bolts
Inches mm lbs kg
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-07-18
ALR2222/095-201 D
Fil/file
PRODUCT SPECIFICATION
ALR2222-095_D.doc
COMPACT repeater with adjustable bandwidth 1800 MHz version, Low band/High band, Dual cell Product Number ALR2222/095
Band 1 (Low Band) 1. Electrical specification (typical values)
The repeater complies with the requirement of ETS 300609-4 Frequency tuning band Up link Frequency tuning band Down link Filter bandwidth, software adjustable Filter setting resolution Duplex spacing Gain adjustment range Gain (max variation 25 to +55 C) Gain step resolution Filter sensitivity @ 400 kHz offset Filter sensitivity @ 600 kHz offset Filter sensitivity @ 1 MHz offset Output power, PEP* Output power, 2 carrier* Pass band ripple Max absolute group delay Noise figure at 70 dB gain, 25 C Maximum input power Receiver input port return loss Power consumption Power supply voltage 1710 1765 1805 1860 0.5 15 25 95 55-70 5 1 20 30 35 + 23 + 17 5 6 8 +13 14 55 85 - 265 MHz MHz MHz kHz MHz dB dB dB dB dB dB dBm dBm dB s dB dBm dB W VAC
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-07-18
ALR2222/095-201 D
Fil/file
PRODUCT SPECIFICATION
ALR2222-095_D.doc
15,2 x 15,2 x 6,3 385 x 385 x 159,5 See Compact High < 44 < 20 N-type female Allgon Safety bolts
Inches mm lbs kg
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-12
ALR2222/095-201
Fil/file
PRODUCT SPECIFICATION
ALR2222-095_C.doc
COMPACT repeater with adjustable bandwidth 1800 MHz version, Low band/High band, Dual cell Product Number ALR2222/095
Band 1 (Low Band) 1. Electrical specification (typical values)
The repeater complies with the requirement of ETS 300609-4 Frequency tuning band Up link Frequency tuning band Down link Filter bandwidth, software adjustable Filter setting resolution Duplex spacing Gain adjustment range Gain (max variation 25 to +55 C) Gain step resolution Filter sensitivity @ 400 kHz offset Filter sensitivity @ 600 kHz offset Filter sensitivity @ 1 MHz offset Output power, PEP Output power, 2 carrier Pass band ripple Max absolute group delay Noise figure at 70 dB gain, 25 C Maximum input power Receiver input port return loss Power consumption Power supply voltage 1710 1765 1805 1860 0.5 15 25 95 55-70 5 1 20 30 35 + 20 + 14 5 6 8 +13 14 55 85 - 265 MHz MHz MHz kHz MHz dB dB dB dB dB dB dBm dBm dB s dB dBm dB W VAC
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-12
ALR2222/095-201
Fil/file
PRODUCT SPECIFICATION
ALR2222-095_C.doc
15,2 x 15,2 x 6,3 385 x 385 x 159,5 See Compact High < 44 < 20 N-type female Allgon Safety bolts
Inches mm lbs kg
Note! -3 dB less output power according to combined antennas, 1 service and 1 donor antenna
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-12
ALR2222/901-201
Fil/file
ALR2222-901_C.doc
COMPACT repeater with adjustable bandwidth 1800 MHz version, High band, Dual band Product Number ALR2222/901
Band 1 1. Electrical specification (typical values)
The repeater complies with the requirement of ETS 300609-4 Frequency tuning band Up link Frequency tuning band Down link Filter bandwidth, software adjustable Filter setting resolution Duplex spacing Gain adjustment range Gain (max variation 25 to +55 C) Gain step resolution Filter sensitivity @ 400 kHz offset Filter sensitivity @ 600 kHz offset Filter sensitivity @ 1 MHz offset Output power, PEP Output power, 2 carrier Pass band ripple Max absolute group delay Noise figure at 70 dB gain, 25 C Maximum input power Receiver input port return loss Power consumption Power supply voltage 1730 1785 1825 - 1880 0.5 15 25 95 55-70 5 1 20 30 35 + 23 + 17 5 6 8 +13 14 55 85 - 265 MHz MHz MHz kHz MHz dB dB dB dB dB dB dBm dBm dB s dB dBm dB W VAC
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-12
ALR2222/901-201
Fil/file
ALR2222-901_C.doc
Band 2
2. Electrical specification (typical values) The repeater complies with the requirement of ETS 300609-4 Frequency tuning band Up link Frequency tuning band Down link Filter bandwidth, software adjustable Filter setting resolution Duplex spacing Gain adjustment range Gain (max variation 25 to +55 C) Gain step resolution Filter sensitivity @ 400 kHz offset Filter sensitivity @ 600 kHz offset Filter sensitivity @ 1 MHz offset Output power, PEP Output power, 2 carrier Pass band ripple Max absolute group delay Noise figure at 70 dB gain, 25 C Maximum input power Receiver input port return loss Power supply voltage Power consumption 1730 1785 1825 1880 0.5 15 25 95 55-70 5 1 20 30 35 + 23 + 17 5 6 8 +13 14 85 - 265 <55 MHz MHz MHz kHz MHz dB dB dB dB dB dB dBm dBm dB s dB dBm dB VAC W
15.2 x 15.2 x 6.3 385 x 385 x 159,5 See Compact Low < 44 < 20 N-type female
Inches mm lbs kg
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-07-18
ALR3232/001-201 D
Fil/file
ALR3232-001_D.doc
COMPACT repeater Dual band with adjustable bandwidth 1900/1900 MHz version, Low band Product Number: ALR3232/001
1. Electrical specification (typical values) 1900 Bottom
The repeater complies with the requirements of FCC Frequency tuning band Up link Frequency tuning band Down link Filter bandwidth, software adjustable Filter setting resolution Duplex spacing Gain adjustment range Gain (max variation 25 to +55 C) Gain step resolution Filter selectivity @ 400 kHz offset Filter selectivity @ 600 kHz offset Filter selectivity @ 1 MHz offset Output power, PEP Output power, 2 carrier Pass band ripple Max absolute group delay Noise figure at 70 dB gain, 25 C Maximum input power Receiver input port return loss Power supply voltage Power consumption 1850 1890 1930 1970 0.5 15 25 80 55-70 5 1 > 20 > 30 > 35 + 25 + 19 5 6 8 +13 14 85 - 265 <55 MHz MHz MHz kHz MHz dB dB dB dB dB dB dBm dBm dB s dB dBm dB VAC W
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-07-18
ALR3232/001-201 D
Fil/file
ALR3232-001_D.doc
15.2 x 15.2 x 6.3 385 x 385 x 159,5 See Compact High < 44 < 20 N-type female Allgon Safety bolts
Inches mm lbs kg
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-07-18
ALR3232/901-201 D
Fil/file
ALR3232-901_D.doc
COMPACT repeater with adjustable bandwidth 1900/1900 MHz version, High band Product Number: ALR3232/901
1. Electrical specification (typical values)
The repeater complies with the requirements of FCC Frequency tuning band Up link Frequency tuning band Down link Filter bandwidth, software adjustable Filter setting resolution Duplex spacing Gain adjustment range Gain (max variation 25 to +55 C) Gain step resolution Filter selectivity @ 400 kHz offset Filter selectivity @ 600 kHz offset Filter selectivity @ 1 MHz offset Output power, PEP* Output power, 2 carrier* Pass band ripple Max absolute group delay Noise figure at 70 dB gain, 25 C Maximum input power Receiver input port return loss Power supply voltage Power consumption 1870 1910 1950 1990 0.5 15 25 80 55-70 5 1 > 20 > 30 > 35 + 25 + 19 5 6 8 +13 14 85 - 265 <55 MHz MHz MHz kHz MHz dB dB dB dB dB dB dBm dBm dB s dB dBm dB VAC W
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-07-18
ALR3232/901-201 D
Fil/file
ALR3232-901_D.doc
15,2 x 15,2 x 6,3 385 x 385 x 159,5 See Compact High < 44 < 20 N-type female Allgon Safety bolts
Inches mm lbs kg
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-07-18
ALR3242/001-201 E
Fil/file
ALR3242-001_E.doc
COMPACT repeater Dual band with adjustable bandwidth 1900/800 MHz version, Low band Product Number: ALR3242/001
1. Electrical specification (typical values) 1900 Bottom
The repeater complies with the requirements of FCC Frequency tuning band Up link Frequency tuning band Down link Filter bandwidth, software adjustable Filter setting resolution Duplex spacing Gain adjustment range Gain (max variation 25 to +55 C) Gain step resolution Filter selectivity @ 400 kHz offset Filter selectivity @ 600 kHz offset Filter selectivity @ 1 MHz offset Output power, PEP Output power, 2 carrier Pass band ripple Max absolute group delay Noise figure at 70 dB gain, 25 C Maximum input power Receiver input port return loss Power supply voltage Power consumption 1850 1890 1930 1970 0.5 15 25 80 55-70 5 1 > 20 > 30 > 35 + 28 + 22 5 6 8 +13 14 85 - 265 <55 MHz MHz MHz kHz MHz dB dB dB dB dB dB dBm dBm dB s dB dBm dB VAC W
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-07-18
ALR3242/001-201 E
Fil/file
ALR3242-001_E.doc
15.2 x 15.2 x 6.3 385 x 385 x 159,5 See Compact High < 44 < 20 N-type female Allgon Safety bolts
Inches mm lbs kg
If common donor and service antennas are used, diplexers are installed in the repeater.
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-07-18
ALR4242/002-201 D
Fil/file
ALR4242-002_D.doc
COMPACT repeater with adjustable bandwidth Dual 800 MHz version, 25 MHz BW Product Number: ALR4242/002
1. Electrical specification (typical value) 800 Bottom
The repeater complies with the requirements of FCC Frequency tuning band Up link Frequency tuning band Down link Filter bandwidth standard, adjustable Filter setting resolution Duplex spacing Gain adjustment range Gain (max variation 25 to +55 C) Gain step resolution Filter sensitivity @ 400 kHz offset Filter sensitivity @ 600 kHz offset Filter sensitivity @ 1 MHz offset Output power, PEP* Output power, 2 carrier* Band pass ripple Max absolute group delay Noise figure at 65 dB gain, 25 C Maximum input power Receiver input port return loss Power supply voltage Power consumption 824 849 869 894 0.5 25 12.5 45 55-70 5 1 > 20 > 30 > 35 + 25 + 19 5 6 8 +13 14 85 265 <55 MHz MHz MHz kHz MHz dB dB dB dB dB dB dBm dBm dB s dB dBm dB VAC W
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-07-18
ALR4242/002-201 D
Fil/file
ALR4242-002_D.doc
15.2 x 15.2 x 6.3 385 x 385 x 159,5 See Compact High < 44 < 20 N-type female Allgon Safety bolts
Inches mm lbs kg
Product
AR1212_052 AR2111_024 AR2111_042 AR2111_924 AR2111_942 AR2122_021 AR2212_052 AR2212_952 AR3131_022 AR3131_044 AR3131_922 AR3442_052 AR3442_053 AR3542_052 AR4242_052
Description
GSM900 BS/BS 16,5 MHz BW GSM1800 2 CH/900 4 CH LB GSM1800 4 CH/900 2 CH LB GSM1800 2 CH/900 4 CH UB GSM1800 4 CH/900 2 CH UB GSM1800 2 CH/BS1800 16,5 MHz BW GSM1800 BS/900 BS LB GSM1800 BS/900 BS UB GSM1900 2+2 CH LB GSM1900 4+4 CH LB GSM1900 2+2 CH UB TDMA1900 BS/BS 800 16,5 MHz BW TDMA1900 BS/BS 800 25 MHz BW CDMA1900/BS800 BS800/BS800 16,5 MHz BW
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-12
AR1212/052-201 D
Fil/file
AR1212_052_D.doc
Specification of a Dual Band selective Repeater 900/900 MHz, 1 donor and 1 service antenna Product Number: AR1212/052
1. Electrical specification (typical values) The repeater complies with the requirements of ETS 300 609-4 Frequency band Up link Bottom 890 - 915 Frequency band Up link Door 890 - 915 Frequency band Down link Bottom 935 - 960 Frequency band Down link Door 935 - 960 Duplex spacing 45 Absolute group delay <6 Gain adjustment range (1 dB steps) 45-85 6 Gain (max variation -25 to +55 C) Antenna isolation supervision Continuously Filter band width (remotely adjustable) 0.5-16.9 Filter setting resolution 25 Automatic gain control Implemented Selectivity BW 3dB 16.9 Selectivity BW 45dB BW 3dB + 1.2 Selectivity BW 50dB BW 3dB + 2.2 Pass band ripple 5 Output power, PEP +26 Output power 2 carrier +20 6 Noise figure at 85 dB gain, 25 C (typical) Maximum input power (non-destructive) +13 Receiver input port return loss 14 Power supply voltage (default) 230 Power consumption, max 160 2. Environmental specification Temperature range Casing class 3. Mechanical specification Dimensions. (W x H x D) Mechanical outline Weight RF connectors
3 dB less output power due hybrid antenna ports.
MHz MHz MHz MHz MHz s dB dB MHz kHz MHz MHz MHz dB dBm dBm/carrier dB dBm dB V AC W
17.4 x 20.9 x 9.6 440 x 530 x 240 See Standard High 75 34 N-type female
Inches mm lbs Kg
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-12
AR2111/024-201 B
Fil/file
AR2111_024_B.doc
Specification of a GSM 1800/900 channel selective repeater 2+4 -channel version, Lower band Product Number: AR2111/024
The antenna connections 2+4 channels can either be combined diplexer or separated 1. Electrical specification (typical values) GSM 1800 2 channels The repeater complies with the requirements of ETS 300609-4 Frequency band Up link Frequency band Down link Number of channels Duplex spacing Gain adjustment range (1 dB steps) Gain (max variation 25 to +55 C) Absolute group delay Group delay variation within any 100KHz segment in the pass band Output power per channel Automatic gain control Antenna isolation supervision Selectivity 100KHz Selectivity 400KHz Selectivity 600KHz Selectivity 1MHz Selectivity 5MHz Pass band ripple Noise figure at 85 dB gain, 25 C (typical) Maximum input power (non-destructive) Receiver input port return loss Power supply voltage (default) Power consumption, max 1710 - 1765 1805 - 1860 2 95 50-90 4 <5 < 200 +33 Implemented Continuously > -3 < -35 < -45 < -50 < -60 3 5 +13 14 230 85 MHz MHz MHz dB dB s ns dBm
dB dB dB dB dB dB dB dBm dB V AC W
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-12
AR2111/024-201 B
Fil/file
AR2111_024_B.doc
2. Electrical specification (typical values) GSM 900 4 channels The repeater complies with the requirements of ETS 300 609-4 Frequency band Up link Frequency band Down link Number of channels Duplex spacing Gain adjustment range (1 dB steps) Gain (max variation 25 to +55 C) Absolute group delay Group delay variation within any 100KHz segment in the pass band Output power per channel Automatic gain control Antenna isolation supervision Selectivity 100KHz Selectivity 400KHz Selectivity 600KHz Selectivity 1 MHz Selectivity 5 MHz Pass band ripple Noise figure at 85 dB gain, 25 C (typical) Maximum input power (non-destructive) Receiver input port return loss Power supply voltage (default) Power consumption, max 3. Environmental specification Temperature range Casing class 4. Mechanical specification Dimensions. (W x H x D) Mechanical outline Weight RF connectors
If common donor and service antennas are used, diplexers are installed in the repeater. Approx. 1dB loss should be considered.
890 - 915 935 - 960 4 45 50-90 4 <5 < 200 +30 Implemented Continuously > -3 < -35 < -45 < -50 < -60 3 5 +13 14 230 155
dB dB dB dB dB dB dB dBm dB V AC W
17.4 x 20.9 x 9.6 440 x 530 x 240 See Standard High 75 34 N-type female
Inches mm lbs Kg
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-12
AR2111/042-201 B
Fil/file
AR2111_042_B.doc
Specification of a GSM 1800/900 channel selective repeater 4+2 -channel version, Lower band Product Number: AR2111/042
The antenna connections 4+2 channels can either be combined with diplexer or separated
1. Electrical specification (typical values) GSM 1800 4 channels The repeater complies with the requirements of ETS 300609-4 Frequency band Up link Frequency band Down link Number of channels Duplex spacing Gain adjustment range (1 dB steps) Gain (max variation 25 to +55C) Absolute group delay Group delay variation within any 100KHz segment in the pass band Output power per channel GSM 1800 Automatic gain control Antenna isolation supervision Selectivity 100KHz Selectivity 400KHz Selectivity 600KHz Selectivity 1MHz Selectivity 5MHz Pass band ripple Noise figure at 85 dB gain, 25 C (typical) Maximum input power (non-destructive) Receiver input port return loss Power supply voltage (default) Power consumption, max 1710 - 1765 1805 - 1860 4 95 50-90 4 <5 < 200 +30 Implemented Continuously > -3 < -35 < -45 < -50 < -60 3 5 +13 14 230 155 MHz MHz MHz dB dB s ns dBm
dB dB dB dB dB dB dB dBm dB V AC W
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-12
AR2111/042-201 B
Fil/file
AR2111_042_B.doc
2. Electrical specification (typical values) GSM 900 2 channels The repeater complies with the requirements of ETS 300 609-4 Frequency band Up link Frequency band Down link Number of channels Duplex spacing Absolute group delay Gain adjustment range (1 dB steps) Gain (max variation 25 to +55 C) Antenna isolation supervision Group delay variation within any 100KHz segment in the pass band Output power per channel Automatic gain control Selectivity 100KHz Selectivity 400KHz Selectivity 600KHz Selectivity 1 MHz Selectivity 5 MHz Pass band ripple Noise figure at 85 dB gain, 25 C (typical) Maximum input power (non-destructive) Receiver input port return loss Power supply voltage (default) Power consumption, max 890 - 915 935 - 960 2 45 <5 50-90 4 Continuously < 200 +33 Implemented > -3 < -35 < -45 < -50 < -60 3 5 +13 14 230 85 MHz MHz MHz s dB dB ns dBm dB dB dB dB dB dB dB dBm dB V AC W
3. Environmental specification Temperature range Casing class 4. Mechanical specification Dimensions. (W x H x D) Mechanical outline Weight RF connectors
If common donor and service antennas are used, diplexers are installed in the repeater. Approx. 1dB loss should be considered.
17.4 x 20.9 x 9.6 440 x 530 x 240 See Standard High 75 34 N-type female
Inches mm lbs Kg
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-12
AR2111/924-201 B
Fil/file
AR2111_924_B.doc
Specification of a GSM 1800/900 channel selective repeater 2+4 -channel version, High band Product Number: AR2111/924
The antenna connections 2+4 channels can either be combined diplexer or separated
1. Electrical specification (typical values) GSM 1800 2 channels The repeater complies with the requirements of ETS 300609-4 Frequency band Up link Frequency band Down link Number of channels Duplex spacing Gain adjustment range (1 dB steps) Gain (max variation 25 to +55 C) Absolute group delay Group delay variation within any 100KHz segment in the pass band Output power per channel Automatic gain control Antenna isolation supervision Selectivity 100KHz Selectivity 400KHz Selectivity 600KHz Selectivity 1MHz Selectivity 5MHz Pass band ripple Noise figure at 85 dB gain, 25 C (typical) Maximum input power (non-destructive) Receiver input port return loss Power supply voltage (default) Power consumption, max 1730 1785 1825 1880 2 95 50-90 4 <5 < 200 +33 Implemented Continuously > -3 < -35 < -45 < -50 < -60 3 5 +13 14 230 85 MHz MHz MHz dB dB s ns dBm
dB dB dB dB dB dB dB dBm dB V AC W
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-12
AR2111/924-201 B
Fil/file
AR2111_924_B.doc
2. Electrical specification (typical values) GSM 900 4 channels The repeater complies with the requirements of ETS 300 609-4 Frequency band Up link Frequency band Down link Number of channels Duplex spacing Gain adjustment range (1 dB steps) Gain (max variation 25 to +55 C) Absolute group delay Group delay variation within any 100KHz segment in the pass band Output power per channel Automatic gain control Antenna isolation supervision Selectivity 100KHz Selectivity 400KHz Selectivity 600KHz Selectivity 1 MHz Selectivity 5 MHz Pass band ripple Noise figure at 85 dB gain, 25 C (typical) Maximum input power (non-destructive) Receiver input port return loss Power supply voltage (default) Power consumption, max 890 - 915 935 - 960 4 45 50-90 4 <5 < 200 +30 Implemented Continuously > -3 < -35 < -45 < -50 < -60 3 5 +13 14 230 155 MHz MHz MHz dB dB s ns dBm
dB dB dB dB dB dB dB dBm dB V AC W
3. Environmental specification Temperature range Casing class 4. Mechanical specification Dimensions. (W x H x D) Mechanical outline Weight RF connectors
If common donor and service antennas are used, diplexers are installed in the repeater. Approx. 1dB loss should be considered.
17.4 x 20.9 x 9.6 440 x 530 x 240 See Standard High 75 34 N-type female
Inches mm lbs Kg
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-16
AR2111/942-201 B
Fil/file
AR2111_942_B.doc
Specification of a GSM 1800/900 channel selective repeater 4+2 -channel version, High band Product Number: AR2111/942
The antenna connections 4+2 channels can either be combined with diplexer or separated
1. Electrical specification (typical values) GSM 1800 4 channels The repeater complies with the requirements of ETS 300609-4 Frequency band Up link Frequency band Down link Number of channels Duplex spacing Gain adjustment range (1 dB steps) Gain (max variation 25 to +55C) Absolute group delay Group delay variation within any 100KHz segment in the pass band Output power per channel Automatic gain control Antenna isolation supervision Selectivity 100KHz Selectivity 400KHz Selectivity 600KHz Selectivity 1MHz Selectivity 5MHz Pass band ripple Noise figure at 85 dB gain, 25 C (typical) Maximum input power (non-destructive) Receiver input port return loss Power supply voltage (default) Power consumption, max 1730 - 1785 1825 - 1880 4 95 50-90 4 <5 < 200 +30 Implemented Continuously > -3 < -35 < -45 < -50 < -60 3 5 +13 14 230 155 MHz MHz MHz dB dB s ns dBm
dB dB dB dB dB dB dB dBm dB V AC W
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-16
AR2111/942-201 B
Fil/file
AR2111_942_B.doc
2. Electrical specification (typical values) GSM 900 2 channels The repeater complies with the requirements of ETS 300 609-4 Frequency band Up link Frequency band Down link Number of channels Duplex spacing Absolute group delay Gain adjustment range (1 dB steps) Gain (max variation 25 to +55 C) Antenna isolation supervision Group delay variation within any 100KHz segment in the pass band Output power per channel Automatic gain control Selectivity 100KHz Selectivity 400KHz Selectivity 600KHz Selectivity 1 MHz Selectivity 5 MHz Pass band ripple Noise figure at 85 dB gain, 25 C (typical) Maximum input power (non-destructive) Receiver input port return loss Power supply voltage (default) Power consumption, max 890 - 915 935 - 960 2 45 <5 50-90 4 Continuously < 200 +33 Implemented > -3 < -35 < -45 < -50 < -60 3 5 +13 14 230 85 MHz MHz MHz s dB dB ns dBm dB dB dB dB dB dB dB dBm dB V AC W
3. Environmental specification Temperature range Casing class 4. Mechanical specification Dimensions. (W x H x D) Mechanical outline Weight RF connectors
If common donor and service antennas are used, diplexers are installed in the repeater. Approx. 1dB loss should be considered.
17.4 x 20.9 x 9.6 440 x 530 x 240 See Standard High 75 34 N-type female
Inches mm lbs Kg
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-12
AR2122/021-201 C
Fil/file
AR2122_021_C.doc
Specification of a Channel/Band selective Repeater GSM1800 2 CH/BS1800 MHz, Lower band Product Number: AR2122/021
1. Electrical specification (typical values) GSM 1800 2 CH The repeater complies with the requirements of ETS 300609-4 Frequency band Up link Frequency band Down link Number of channels Duplex spacing Gain adjustment range (1 dB steps) Gain (max variation 25 to +55 C) Absolute group delay Group delay variation within any 100KHz segment in the pass band Output power per channel Automatic gain control Antenna isolation supervision Selectivity 100KHz Selectivity 400KHz Selectivity 600KHz Selectivity 1MHz Selectivity 5MHz Pass band ripple Noise figure at 85 dB gain, 25 C (typical) Maximum input power (non-destructive) Receiver input port return loss Power supply voltage (default) Power consumption, max 1710 - 1765 1805 - 1860 2 95 50-90 4 <5 < 200 +30 Implemented Continuously > -3 < -35 < -45 < -50 < -60 3 5 +13 14 230 85 MHz MHz MHz dB dB s ns dBm
dB dB dB dB dB dB dB dBm dB V AC W
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-12
AR2122/021-201 C
Fil/file
AR2122_021_C.doc
2. Electrical specification (typical values) GSM 1800 BS The repeater complies with the requirements of ETS 300 609-4 Frequency band Up link Frequency band Down link Duplex spacing Absolute group delay Antenna isolation supervision Filter bandwidth (remotely adjustable) Filter setting resolution Gain adjustment range (in 1 dB steps) Gain (max variation 25 to +55 C) Selectivity BW 3 dB Selectivity BW 45 dB Selectivity BW 50 dB Pass band ripple Output power, PEP Output power 2 carrier Automatic gain control Noise figure at 85 dB gain, 25 C (typical) Maximum input power (non-destructive) Receiver input port return loss Power supply voltage (default) Power consumption, max 3. Environmental specification Temperature range Casing class 4. Mechanical specification Dimensions. (W x H x D) Mechanical outline Weight RF connectors
If common donor and service antennas are used, -3 dB less output power
1710 1765 1805 - 1860 95 <6 Continuously 0.5 - 16.9 25 45-85 6 16.9 BW3 dB + 1.2 BW3 dB + 2.2 5 + 29 + 23 Implemented 6 +13 14 230 160
MHz MHz MHz s MHz KHz dB dB MHz MHz MHz dB dBm dBm/carrier dB dBm dB V AC W
17.4 x 20.9 x 9.6 440 x 530 x 240 See Standard High 75 34 N-type female
Inches mm lbs Kg
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-12
AR2212/952/01_201 C
Fil/file
AR2212_952_C.doc
Specification of a Band Selective Repeater Dual band 1800 MHz/900 MHz High Band Product Number: AR2212/952
1. Electrical specification (typical values) 1800 MHz High Band Bottom The repeater complies with the requirements of ETS 300 609-4 Frequency band Up link Frequency band Down link Duplex spacing Absolute group delay Antenna isolation supervision Filter bandwidth (remotely adjustable) Filter setting resolution Gain adjustment range (in 1 dB steps) Gain (max variation 25 to +55 C Selectivity BW 3 dB Selectivity BW 45 dB Selectivity BW 50 dB Output power, PEP Output power 2 carrier Pass band ripple Automatic gain control Noise figure at 85 dB gain, 25 C (typical) Maximum input power (non-destructive) Receiver input port return loss Power supply voltage Power consumption, max 1730 - 1785 1825 1880 95 <6 Continuously 0.5 - 16.9 25 45-85 6 16.9 BW3 dB + 1.2 BW3 dB + 2.2 + 32 + 26 6 Implemented 6 +13 14 230 160 MHz MHz MHz s MHz KHz dB dB MHz MHz MHz dBm dBm/carrier dB dB dBm dB V AC W
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-12
AR2212/952/01_201 C
Fil/file
AR2212_952_C.doc
2. Electrical specification (typical values) 900 MHz Door The repeater complies with the requirements of ETS 300 609-4 Frequency band Up link Frequency band Down link Duplex spacing Absolute group delay Gain adjustment range (1 dB steps) Gain (max variation -25 to +55 C) Antenna isolation supervision Filter band width (remotely adjustable) Filter setting resolution Selectivity BW 3dB Selectivity BW 45dB Selectivity BW 50dB Output power, PEP Output power 2 carrier Pass band ripple Automatic gain control Noise figure at 85 dB gain, 25 C (typical) Maximum input power (non-destructive) Receiver input port return loss Power supply voltage Power consumption, max 3. Environmental specification Temperature range Casing class 4. Mechanical specification Dimensions. (W x H x D) Mechanical outline Weight RF connectors
If common donor and service antennas are used, diplexers are installed in the repeater. Approx. 1dB loss should be considered.
890 - 915 935 - 960 45 <6 45-85 6 Continuously 0.5-16.9 25 16.9 BW 3dB + 1.2 BW 3dB + 2.2 +29 +23 5 Implemented 6 +13 14 230 160
MHz MHz MHz s dB dB MHz KHz MHz MHz MHz dBm dBm/carrier dB dB dBm dB V AC W
17.4 x 20.9 x 9.6 440 x 530 x 240 See Standard High 75 34 N-type female
Inches mm lbs Kg
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-12
AR3131/022-201 B
Fil/file
AR3131_022_B.doc
Specification of a Dual GSM 1900 channel selective repeater 2+2 -channel version, Lower band Product Number: AR3131/022
1. Electrical specification (typical values) GSM1900 Bottom The repeater complies with the requirements of ETS 300 609-4 Frequency band Up link Frequency band Down link Number of channels Duplex spacing Gain adjustment range (1 dB steps) Gain (max variation 25 to +55 C) Absolute group delay Group delay variation within any 100KHz segment in the pass band Output power per channel Automatic gain control Antenna isolation supervision Selectivity 100KHz Selectivity 400KHz Selectivity 600KHz Selectivity 1MHz Selectivity 5MHz Pass band ripple Noise figure at 85 dB gain, 25 C (typical) Maximum input power (non-destructive) Receiver input port return loss Power supply voltage (default) Power consumption, max 1850 -1890 1930 - 1970 2 80 50-90 4 <5 < 200 +33 Implemented Continuously > -3 < -35 < -45 < -50 < -60 3 5 +13 14 115 85 MHz MHz MHz dB dB s ns dBm
dB dB dB dB dB dB dB dBm dB V AC W
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-12
AR3131/022-201 B
Fil/file
AR3131_022_B.doc
2. Electrical specification (typical values) GSM1900 Door The repeater complies with the requirements of ETS 300 609-4 Frequency band Up link Frequency band Down link Number of channels Duplex spacing Gain adjustment range (1 dB steps) Gain (max variation 25 to +55 C) Absolute group delay Group delay variation within any 100KHz segment in the pass band Output power per channel Automatic gain control Antenna isolation supervision Selectivity 100KHz Selectivity 400KHz Selectivity 600KHz Selectivity 1MHz Selectivity 5MHz Pass band ripple Noise figure at 85 dB gain, 25 C (typical) Maximum input power (non-destructive) Receiver input port return loss Power supply voltage (default) Power consumption, max 1850 -1890 1930 - 1970 2 80 50-90 4 <5 < 200 +33 Implemented Continuously > -3 < -35 < -45 < -50 < -60 3 5 +13 14 115 85 MHz MHz MHz dB dB s ns dBm
dB dB dB dB dB dB dB dBm dB V AC W
3. Environmental specification Temperature range Casing class 4.Mechanical specification Dimensions. (W x H x D) Mechanical outline Weight RF connectors
If common donor and service antennas are used, -3 dB less output power
17.4 x 20.9 x 9.6 440 x 530 x 240 See Standard High 75 34 N-type female
Inches mm lbs Kg
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-12
AR3131/044-201 B
Fil/file
AR3131_044_B.doc
Specification of a Dual GSM 1900 channel selective repeater 4+4-channel version, Lower band Product Number: AR3131/044
1. Electrical specification (typical values) GSM1900 Bottom The repeater complies with the requirements of ETS 300 609-4 Frequency band Up link Frequency band Down link Number of channels Duplex spacing Gain adjustment range (1 dB steps) Gain (max variation 25 to +55 C) Absolute group delay Group delay variation within any 100KHz segment in the pass band Output power per channel Automatic gain control Antenna isolation supervision Selectivity 100KHz Selectivity 400KHz Selectivity 600KHz Selectivity 1MHz Selectivity 5MHz Pass band ripple Noise figure at 85 dB gain, 25 C (typical) Maximum input power (non-destructive) Receiver input port return loss Power supply voltage (default) Power consumption, max 1850 -1890 1930 - 1970 4 80 50-90 4 <5 < 200 +30 Implemented Continuously > -3 < -35 < -45 < -50 < -60 3 5 +13 14 115 155 MHz MHz MHz dB dB s ns dBm
dB dB dB dB dB dB dB dBm dB V AC W
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-12
AR3131/044-201 B
Fil/file
AR3131_044_B.doc
2. Electrical specification (typical values) GSM1900 Door The repeater complies with the requirements of ETS 300 609-4 Frequency band Up link Frequency band Down link Number of channels Duplex spacing Gain adjustment range (1 dB steps) Gain (max variation 25 to +55 C) Absolute group delay Group delay variation within any 100KHz segment in the pass band Output power per channel Automatic gain control Antenna isolation supervision Selectivity 100KHz Selectivity 400KHz Selectivity 600KHz Selectivity 1MHz Selectivity 5MHz Pass band ripple Noise figure at 85 dB gain, 25 C (typical) Maximum input power (non-destructive) Receiver input port return loss Power supply voltage (default) Power consumption, max 1850 -1890 1930 - 1970 4 80 50-90 4 <5 < 200 +30 Implemented Continuously > -3 < -35 < -45 < -50 < -60 3 5 +13 14 115 155 MHz MHz MHz dB dB s ns dBm
dB dB dB dB dB dB dB dBm dB V AC W
3. Environmental specification Temperature range Casing class 4.Mechanical specification Dimensions. (W x H x D) Mechanical outline Weight RF connectors
If common donor and service antennas are used, -3 dB less output power
17.4 x 20.9 x 9.6 440 x 530 x 240 See Standard High 75 34 N-type female
Inches mm lbs Kg
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-12
AR3131/922-201 B
Fil/file
AR3131_922_B.doc
Specification of a Dual GSM 1900 channel selective repeater 2+2-channel version, High band Product Number: AR3131/922
1. Electrical specification (typical values) GSM1900 Bottom The repeater complies with the requirements of ETS 300 609-4 Frequency band Up link Frequency band Down link Number of channels Duplex spacing Gain adjustment range (1 dB steps) Gain (max variation 25 to +55 C) Absolute group delay Group delay variation within any 100KHz segment in the pass band Output power per channel Automatic gain control Antenna isolation supervision Selectivity 100KHz Selectivity 400KHz Selectivity 600KHz Selectivity 1MHz Selectivity 5MHz Pass band ripple Noise figure at 85 dB gain, 25 C (typical) Maximum input power (non-destructive) Receiver input port return loss Power supply voltage (default) Power consumption, max 1870 1910 1950 - 1990 2 80 50-90 4 <5 < 200 +33 Implemented Continuously > -3 < -35 < -45 < -50 < -60 3 5 +13 14 115 85 MHz MHz MHz dB dB s ns dBm
dB dB dB dB dB dB dB dBm dB V AC W
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-12
AR3131/922-201 B
Fil/file
AR3131_922_B.doc
2. Electrical specification (typical values) GSM1900 Door The repeater complies with the requirements of ETS 300 609-4 Frequency band Up link Frequency band Down link Number of channels Duplex spacing Gain adjustment range (1 dB steps) Gain (max variation 25 to +55 C) Absolute group delay Group delay variation within any 100KHz segment in the pass band Output power per channel Automatic gain control Antenna isolation supervision Selectivity 100KHz Selectivity 400KHz Selectivity 600KHz Selectivity 1MHz Selectivity 5MHz Pass band ripple Noise figure at 85 dB gain, 25 C (typical) Maximum input power (non-destructive) Receiver input port return loss Power supply voltage (default) Power consumption, max 1870 1910 1950 - 1990 2 80 50-90 4 <5 < 200 +33 Implemented Continuously > -3 < -35 < -45 < -50 < -60 3 5 +13 14 115 85 MHz MHz MHz dB dB s ns dBm
dB dB dB dB dB dB dB dBm dB V AC W
3. Environmental specification Temperature range Casing class 4. Mechanical specification Dimensions. (W x H x D) Mechanical outline Weight RF connectors
If common donor and service antennas are used, -3 dB less output power
17.4 x 20.9 x 9.6 440 x 530 x 240 See Standard High 75 34 N-type female
Inches mm lbs Kg
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-12
AR3442/052-201 C
Fil/file
AR3442_052_C.doc
Specification of a band selective repeater 1900/800 MHz version, Lower band Product number: AR3442/052
1. Electrical specification (typical value) BS1900 The repeater complies with the FCC requirements Frequency band Up link Frequency band Down link Duplex spacing Absolute group delay Antenna isolation supervision Filter bandwidth (remotely adjustable) Filter setting resolution Gain adjustment range (in 1 dB steps) Gain (max variation 25 to +55 C) Selectivity BW 3 dB Selectivity BW 45 dB Selectivity BW 50 dB Passband ripple Max output power PEP ? Output power 2 carrier ? Automat gain control Noise figure at 85 dB gain, 25 C (typical) Maximum input power (non-destructive) Receiver input port return loss Power supply voltage (default) Power consumption, max 1850 1890 1930 1970 80 <6 Continuously 0.5 16.9 25 45-85 6 16.9 BW3 dB + 1.2 BW3 dB + 2.2 6 + 36 + 30 Implemented 6 +13 14 115 160 MHz MHz MHz s MHz KHz dB dB MHz MHz MHz dB dBm dBm dB dBm dB V AC W
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-12
AR3442/052-201 C
Fil/file
AR3442_052_C.doc
2. Electrical specification (typical value) BS800 The repeater complies with the requirements of FCC Frequency band Up link Frequency band Down link Duplex spacing Absolute group delay Gain adjustment range (1 dB steps) Gain (max variation 25 to +55 C) Antenna isolation supervision Filter band width (remotely adjustable) Filter setting resolution Selectivity BW 3dB Selectivity BW 45dB Selectivity BW 50dB Pass band ripple Output power, PEP ? Output power 2 carrier ? Automatic gain control Noise figure at 85 dB gain, 25 C (typical) Maximum input power (non-destructive) Receiver input port return loss Power supply voltage (default) Power consumption, max
824 - 849 869 - 894 45 <6 45-85 6 Continuously 0.5-16.9 25 16.9 BW 3dB + 1.2 BW 3dB + 2.2 5 +36 +30 Implemented 5 +13 14 115 160
s
dB dB MHz kHz MHz MHz MHz dB dBm dBm/carrier dB dBm dB V AC W
3. Environmental specification Temperature range Casing class 4. Mechanical specification Dimensions. (W x H x D) Mechanical outline Weight RF connectors
17.4 x 20.9 x 9.6 440 x 530 x 240 See Standard High 75 34 N-type
Inches mm lbs Kg
Remark ? : If common donor and service antennas are used, diplexers are installed in the repeater. Approx. 1dB loss should be considered.
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-12
AR3442/053-201 B
Fil/file
AR3442_053_B.doc
Specification of a band selective repeater 1900/800 MHz version, Lower band Product number: AR3442/053
1. Electrical specification (typical value) BS1900 The repeater complies with the FCC requirements Frequency band Up link Frequency band Down link Duplex spacing Absolute group delay Antenna isolation supervision Filter bandwidth (remotely adjustable) Filter setting resolution Gain adjustment range (in 1 dB steps) Gain (max variation 25 to +55 C) Selectivity BW3 dB, 16.5 MHz filter Selectivity BW35 dB Selectivity BW45 dB Passband ripple Max output power PEP ? Output power 2 carrier ? Automat gain control Noise figure at 85 dB gain, 25 C (typical) Maximum input power (non-destructive) Receiver input port return loss Power supply voltage (default) Power consumption, max 1850 1890 1930 1970 80 <6 Continuously 0.5 16.5 25 45-85 6 16.5 BW3 dB + 1.2 BW3 dB + 2.2 5 + 36 + 30 Implemented 6 +13 14 115 160 MHz MHz MHz s MHz KHz dB dB MHz MHz MHz dB dBm dBm dB dBm dB V AC W
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-12
AR3442/053-201 B
Fil/file
AR3442_053_B.doc
2. Electrical specification (typical value) BS800 The repeater complies with the requirements of FCC Frequency band Up link Frequency band Down link Duplex spacing Absolute group delay Gain adjustment range (1 dB steps) Gain (max variation 25 to +55 C) Antenna isolation supervision Filter band width (remotely adjustable) Filter setting resolution Selectivity BW 3dB Selectivity BW 35dB Selectivity BW 45dB Pass band ripple Output power, PEP ? Output power 2 carrier ? Automatic gain control Noise figure at 85 dB gain, 25 C (typical) Maximum input power (non-destructive) Receiver input port return loss Power supply voltage (default) Power consumption, max
824 - 849 869 - 894 45 <6 45-85 6 Continuously 0.5-25 25 25 BW 3dB + 1.2 BW 3dB + 2.2 5 +36 +30 Implemented 5 +13 14 115 160
MHz MHz MHz s dB dB MHz kHz MHz MHz MHz dB dBm dBm/carrier dB dBm dB V AC W
3. Environmental specification Temperature range Casing class 4. Mechanical specification Dimensions. (W x H x D) Mechanical outline Weight RF connectors
17.4 x 20.9 x 9.6 440 x 530 x 240 See Standard High 75 34 7/16-type
Inches mm lbs Kg
Remark ? : If common donor and service antennas are used, diplexers are installed in the repeater. Approx. 1dB loss should be considered.
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-12
AR3442/052-201 C
Fil/file
AR3442_052_C.doc
Specification of a band selective repeater 1900/800 MHz version, Lower band Product number: AR3442/052
1. Electrical specification (typical value) BS1900 The repeater complies with the FCC requirements Frequency band Up link Frequency band Down link Duplex spacing Absolute group delay Antenna isolation supervision Filter bandwidth (remotely adjustable) Filter setting resolution Gain adjustment range (in 1 dB steps) Gain (max variation 25 to +55 C) Selectivity BW 3 dB Selectivity BW 45 dB Selectivity BW 50 dB Passband ripple Max output power PEP ? Output power 2 carrier ? Automat gain control Noise figure at 85 dB gain, 25 C (typical) Maximum input power (non-destructive) Receiver input port return loss Power supply voltage (default) Power consumption, max 1850 1890 1930 1970 80 <6 Continuously 0.5 16.9 25 45-85 6 16.9 BW3 dB + 1.2 BW3 dB + 2.2 6 + 36 + 30 Implemented 6 +13 14 115 160 MHz MHz MHz s MHz KHz dB dB MHz MHz MHz dB dBm dBm dB dBm dB V AC W
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-12
AR3442/052-201 C
Fil/file
AR3442_052_C.doc
2. Electrical specification (typical value) BS800 The repeater complies with the requirements of FCC Frequency band Up link Frequency band Down link Duplex spacing Absolute group delay Gain adjustment range (1 dB steps) Gain (max variation 25 to +55 C) Antenna isolation supervision Filter band width (remotely adjustable) Filter setting resolution Selectivity BW 3dB Selectivity BW 45dB Selectivity BW 50dB Pass band ripple Output power, PEP ? Output power 2 carrier ? Automatic gain control Noise figure at 85 dB gain, 25 C (typical) Maximum input power (non-destructive) Receiver input port return loss Power supply voltage (default) Power consumption, max
824 - 849 869 - 894 45 <6 45-85 6 Continuously 0.5-16.9 25 16.9 BW 3dB + 1.2 BW 3dB + 2.2 5 +36 +30 Implemented 5 +13 14 115 160
s
dB dB MHz kHz MHz MHz MHz dB dBm dBm/carrier dB dBm dB V AC W
3. Environmental specification Temperature range Casing class 4. Mechanical specification Dimensions. (W x H x D) Mechanical outline Weight RF connectors
17.4 x 20.9 x 9.6 440 x 530 x 240 See Standard High 75 34 N-type
Inches mm lbs Kg
Remark ? : If common donor and service antennas are used, diplexers are installed in the repeater. Approx. 1dB loss should be considered.
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-16
AR4242/052-201 C
Fil/file
AR4242_052_C.doc
Specification of a Dual Band selective Repeater 800/800 MHz Product Number: AR4242/052
1. Electrical specification (typical value) BS800 Bottom The repeater complies with the requirements of FCC Frequency band Up link 824 - 849 Frequency band Down link 869 - 894 Duplex spacing 45 Absolute group delay <6 Gain adjustment range (1 dB steps) 45-85 6 Gain (max variation 25 to +55 C) Antenna isolation supervision Continuously Filter band width (remotely adjustable) 0.5-16.9 Filter setting resolution 25 Selectivity BW 3dB 16.9 Selectivity BW 45dB BW 3dB + 1.2 Selectivity BW 50dB BW 3dB + 2.2 Pass band ripple 5 Output power, PEP +36 Output power 2 carrier +30 Max out of band spurious emission -13 Automatic gain control Implemented 5 Noise figure at 85 dB gain, 25 C (typical) Maximum input power (non-destructive) +13 Receiver input port return loss 14 Power supply voltage (default) 115 Power consumption, max 160 MHz MHz MHz s dB dB MHz kHz MHz MHz MHz dB dBm dBm/carrier dBm dB dBm dB V AC W
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-16
AR4242/052-201 C
Fil/file
AR4242_052_C.doc
2. Electrical specification (typical value) BS800 Door The repeater complies with the requirements of FCC Frequency band Up link Frequency band Down link Duplex spacing Absolute group delay Gain adjustment range (1 dB steps) Gain (max variation 25 to +55 C) Antenna isolation supervision Filter band width (remotely adjustable) Filter setting resolution Selectivity BW 3dB Selectivity BW 45dB Selectivity BW 50dB Pass band ripple Output power, PEP Output power 2 carrier Max out of band spurious emission Automatic gain control Noise figure at 85 dB gain, 25 C (typical) Maximum input power (non-destructive) Receiver input port return loss Power supply voltage (default) Power consumption, max 824 - 849 869 - 894 45 <6 45-85 6 Continuously 0.5-16.9 25 16.9 BW 3dB + 1.2 BW 3dB + 2.2 5 +36 +30 -13 Implemented 5 +13 14 115 160 MHz MHz MHz s dB dB MHz kHz MHz MHz MHz dB dBm dBm/carrier dBm dB dBm dB V AC W
3. Environmental specification Temperature range Casing class 4. Mechanical specification Dimensions. (W x H x D) Mechanical outline Weight RF connectors
If common donor and service antennas are used, -3 dB less output power.
17.4 x 20.9 x 9.6 440 x 530 x 240 See Standard High 75 34 N-type female
Inches mm lbs Kg
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-12
AR2212/052/01_201 C
Fil/file
AR2212_052_C.doc
Specification of a Band Selective Repeater Dual band 1800 MHz/900 MHz Low Band Product Number: AR2212/052
1. Electrical specification (typical values) 1800 MHz Low Band Bottom The repeater complies with the requirements of ETS 300 609-4 Frequency band Up link Frequency band Down link Duplex spacing Absolute group delay Antenna isolation supervision Filter bandwidth (remotely adjustable) Filter setting resolution Gain adjustment range (in 1 dB steps) Gain (max variation 25 to +55 C Selectivity BW 3 dB Selectivity BW 45 dB Selectivity BW 50 dB Output power, PEP Output power 2 carrier Pass band ripple Automatic gain control Noise figure at 85 dB gain, 25 C (typical) Maximum input power (non-destructive) Receiver input port return loss Power supply voltage Power consumption, max 1710 - 1765 1805 1860 95 <6 Continuously 0.5 - 16.9 25 45-85 6 16.9 BW3 dB + 1.2 BW3 dB + 2.2 + 32 + 26 6 Implemented 6 +13 14 230 160 MHz MHz MHz s MHz KHz dB dB MHz MHz MHz dBm dBm/carrier dB dB dBm dB V AC W
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-12
AR2212/052/01_201 C
Fil/file
AR2212_052_C.doc
2. Electrical specification (typical values) 900 MHz Door The repeater complies with the requirements of ETS 300 609-4 Frequency band Up link Frequency band Down link Duplex spacing Absolute group delay Gain adjustment range (1 dB steps) Gain (max variation -25 to +55 C) Antenna isolation supervision Filter band width (remotely adjustable) Filter setting resolution Selectivity BW 3dB Selectivity BW 45dB Selectivity BW 50dB Output power, PEP Output power 2 carrier Pass band ripple Automatic gain control Noise figure at 85 dB gain, 25 C (typical) Maximum input power (non-destructive) Receiver input port return loss Power supply voltage Power consumption, max 3. Environmental specification Temperature range Casing class 4. Mechanical specification Dimensions. (W x H x D) Mechanical outline Weight RF connectors
If common donor and service antennas are used, diplexers are installed in the repeater. Approx. 1dB loss should be considered.
890 - 915 935 - 960 45 <6 45-85 6 Continuously 0.5-16.9 25 16.9 BW 3dB + 1.2 BW 3dB + 2.2 +29 +23 5 Implemented 6 +13 14 230 160
MHz MHz MHz s dB dB MHz KHz MHz MHz MHz dBm dBm/carrier dB dB dBm dB V AC W
17.4 x 20.9 x 9.6 440 x 530 x 240 See Standard High 75 34 N-type female
Inches mm lbs Kg
Product
AR6500_001 AR6560_002 AR6565_022 ALR6200_001
Description
1-2 Channel 1-2 Channel, High Power 3-4 Channel 15 MHz Band selective Compact
Utfrdare/Issued by
Dattum/Date
Godknd/Approved
Dok nr/Doc no
Rev
Sida/Page
Product Management
Dok namn/Doc name
2003-10-14
SYKLK
AR6500/001-201 K
Fil/file
PRODUCT SPECIFICATION
AR6500_001_K.doc
Specification of a WCDMA channel selective repeater 1-2 channel version Product Number: AR6500/001
1. Electrical specification (typical values) The repeater complies with the requirements of 3G TS 25.106 V4.1.0 Frequency band Up link Frequency band Down link Duplex spacing Number of channels Nominal channel spacing Channel frequency steps Channel band width @ -3 dB Automatic gain control Gain adjustment range (1 dB steps) Absolute group delay Output power (DL) RMS, one WCDMA carrier 1 Output power (DL) RMS, two WCDMA carrier 1 Output power (UL) RMS, one WCDMA carrier 1 Output power (UL) RMS, two WCDMA carrier 1 Spurious and Intermodulation 2 Pass band ripple within 4,0 MHz Gain variation at 80 dB gain, over freq. band Noise figure at max gain, 25 C Maximum input power (non-destructive) Receiver input port return loss RF-connectors Power supply voltage Power consumption, max
1 2
1920 -1980 2110 - 2170 190 1-2 5 200 4,4 Implemented 60-90 <6 +30 +25 +20 +15 -30 2 4 3 +13 14 N-type female 230 160
MHz MHz MHz MHz kHz MHz dB s dBm dBm/carrier dBm dBm/carrier dBm dB dB dB dBm dB V AC W
Measured with test model 1/64 DPCH active channels According to 3G TS 25.106 V4.1.0
2. Environmental specification Temperature range Humidity (relative) Casing class 3. Mechanical specification Dimensions. (W x H x D) Mechanical outline Weight RF connectors
17.4 x 20.9 x 6.9 440 x 530 x 175 See Standard Low 46 21 N-type female
Inches mm lbs Kg
Utfrdare/Issued by
Dattum/Date
Godknd/Approved
Dok nr/Doc no
Rev
Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2004-02-05
AR6560_002-201 K
Fil/file
AR6560_002_K.doc
Specification of a WCDMA channel selective repeater 1-2 channel version, high power Product number: AR6560/002
1. Electrical specification (typical values) The repeater complies with the requirements of 3G TS 25.106 V4.1.0 Frequency band Up link Frequency band Down link Duplex spacing Number of channels Nominal channel spacing Channel frequency steps Channel band width @ -3 dB Automatic gain control Gain adjustment range (1 dB steps) Absolute group delay Output power (DL) RMS, one WCDMA carrier 1 Output power (DL), RMS, two WCDMA carrier 1 Output power (UL), RMS, one WCDMA carrier 1 Output power (UL), RMS, two WCDMA carrier 1 Spurious and Intermodulation 2 Pass band ripple within 4,0 MHz Gain variation at 80 dB gain, over freq. band Noise figure at max gain, 25 C Maximum input power (non-destructive) Receiver input port return loss (typical) RF-connectors Power supply voltage Power consumption, max
1 2
1920 1980 2110 2170 190 1-2 5 200 4,4 Implemented 65-95 <6 +38 +33 +20 +15 -30 2 4 3 +13 14 N-type female 230 320
MHz MHz MHz MHz KHz MHz dB s dBm dBm/carrier dBm dBm/carrier dBm dB dB dB dBm dB V AC W
Measured with test model 1/64 DPCH active channels at 61% clipping ratio fulfilling spectrum emission mask According to 3G TS 25.106 V4.1.0
2. Environmental specification Temperature range Humidity (relative) Casing class 3. Mechanical specification Dimensions. (W x H x D) Mechanical outline Weight RF connectors
17.4 x 20.9 x 9.6 440 x 530 x 240 See Standard High 75 34 N-type female
Inches mm lbs Kg
Utfrdare/Issued by
Dattum/Date
Godknd/Approved
Dok nr/Doc no
Rev
Sida/Page
Product Management
Dok namn/Doc name
2003-10-14
SYKLK
AR6565/022-201 I
Fil/file
PRODUCT SPECIFICATION
AR6565_022_I.doc
Specification of a WCDMA channel selective repeater 2+2 channel version Product Number: AR6565/022
! ! True 2+2 CDMA channels in one package The antenna connections 2+2 channels can either be combined (3dB loss) or separated
1. Electrical specification (typical values) The repeater complies with the requirements of 3G TS 25.106 V4.0.0 Frequency band Up link Frequency band Down link Duplex spacing Number of channels Nominal channel spacing Channel frequency steps Channel band width @ -3 dB Automatic gain control Gain adjustment range (1 dB steps) Absolute group delay 1 Output power ( DL) RMS, one WCDMA carrier 1 Output power ( DL) RMS, two WCDMA carrier 1 Output power ( UL) RMS, one WCDMA carrier 1 Output power ( UL) RMS, two WCDMA carrier 2 Spurious and Intermodulation Pass band ripple within 4,0 MHz Gain variation at 80 dB gain, over freq. band Noise figure at max gain, 25 C Maximum input power (non-destructive) Receiver input port return loss RF-connectors Power supply voltage (default) Power consumption, max
1 2
1920 -1980 2110 - 2170 190 3-4 5 200 4,4 Implemented 55-90 <6 +30 +25 +20 +15 -30 2 4 3 +13 14 N-type female 230 320
MHz MHz MHz MHz kHz MHz dB s dBm dBm/carrier dBm dBm/carrier dBm dB dB dB dBm dB V AC W
2. Environmental specification Temperature range Humidity (relative) Casing class MTBF 3. Mechanical specification Dimensions. (W x H x D) Mechanical outline Weight RF connectors
17,4 x 20,9 x 9,6 440 x 530 x 240 See Standard High 75 34 N-type female
Utfrdare/Issued by
Dattum/Date
Godknd/Approved
Dok nr/Doc no
Rev
Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2004-02-05
ALR6200-201
Fil/file
PRODUCT SPECIFICATION
ALR6200_G.doc
Specification of a compact WCDMA band selective repeater 1-3 channel capacity Product number: ALR6200/001
1. Electrical specification (typical values)
The repeater complies with 3G TS 25.106 V4.1.0 requirements Frequency band Up link Frequency band Down link Duplex spacing Filter bandwidth, software adjustable Number of carriers Filter setting resolution Automatic gain control Gain adjustment range (1 dB steps) Absolute group delay Output power, RMS, DL Output power RMS, DL, two WCDMA carrier Output power RMS DL, three WCDMA carrier Output power, RMS, UL Output power RMS, UL, two WCDMA carrier Output power RMS UL, three WCDMA carrier Spurious and Intermodulation Pass band ripple in each WCDMA channel Noise figure UL max gain, 25 C Noise figure DL max gain, 25 C Maximum input power (non-destructive) Receiver input port return loss RF-connectors Power supply voltage Power consumption, max 2. Environmental specification Temperature range Casing class 3. Mechanical specification Dimensions. (W x H x D) Mechanical outline Weight RF-connectors Lock type 1920 1980 2110 2170 190 5-15 1-3 25 Implemented 55-70 <6 +24 +19 +18 +20 +15 +14 -30 3 3 5 +13 14 N-type female 85-260 55 MHz MHz MHz MHz KHz dB s dBm dBm/carrier dBm/carrier dBm dBm/carrier dBm/carrier dBm dB dB dB dBm dB VAC W
15.2 x 15.2 x 4.3 385 x 385 x 110 See Compact Low < 22 < 10 N-type female Allgon Safety bolts
Inches mm lbs kg
ALLGON SYSTEMS AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-10
AR1100/802-201 D
Fil/file
PRODUCT SPECIFICATION
AR1100_802_D.doc
Specification of a RGSM 900 channel selective repeater 2-channel version Product Number: AR1100/802
1. Electrical specification (typical values) The repeater complies with the requirements of ETS 300 609-4 Frequency band Up link Frequency band Down link Number of channels Duplex spacing Gain adjustment range (1 dB steps) Gain (max variation 25 to +55 C) Absolute group delay Group delay variation within any 100KHz segment in the pass band Max output power per channel Automatic gain control Antenna isolation supervision Selectivity 100KHz Selectivity 400KHz Selectivity 600KHz Selectivity 1 MHz Selectivity 5 MHz Pass band ripple Noise figure at 85 dB gain, 25 C (typical) Maximum input power (non-destructive) Receiver input port return loss Power supply voltage (default) Power consumption, typ. (max) 2. Environmental specification Temperature range Casing class 3. Mechanical specification Dimensions. (W x H x D) Mechanical outline Weight RF connectors 876 - 880 921 - 925 2 45 50-90 4 <5 < 200 +33 Implemented Continuously > -3 < -35 < -45 < -50 < -60 3 5 +13 14 230 80 MHz MHz MHz dB dB s ns dBm
dB dB dB dB dB dB dB dBm dB V AC W
17.4 x 20.9 x 6.9 440 x 530 x 175 See Standard Low 46 21 N-type female
Inches mm lbs Kg
ALLGON SYSTEMS AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-10
AR1100/804-201 D
Fil/file
PRODUCT SPECIFICATION
AR1100_804_D.doc
Specification of a RGSM 900 channel selective repeater 4-channel version Product Number: AR1100/804
1. Electrical specification (typical values) The repeater complies with the requirements of ETS 300 609-4 Frequency band Up link Frequency band Down link Number of channels Duplex spacing Gain adjustment range (1 dB steps) Gain (max variation 25 to +55 C) Absolute group delay Group delay variation within any 100KHz segment in the pass band Max output power per channel Automatic gain control Antenna isolation supervision Selectivity 100KHz Selectivity 400KHz Selectivity 600KHz Selectivity 1 MHz Selectivity 5 MHz Pass band ripple Noise figure at 85 dB gain, 25 C (typical) Maximum input power (non-destructive) Receiver input port return loss Power supply voltage (default) Power consumption, typ. (max) 2. Environmental specification Temperature range Casing class 3. Mechanical specification Dimensions. (W x H x D) Mechanical outline Weight RF connectors 876 - 880 921 - 925 4 45 50-90 4 <5 < 200 +30 Implemented Continuously > -3 < -35 < -45 < -50 < -60 3 5 +13 14 230 120 MHz MHz MHz dB dB s ns dBm
dB dB dB dB dB dB dB dBm dB V AC W
17.4 x 20.9 x 6.9 440 x 530 x 175 See Standard Low 46 21 N-type female
Inches mm lbs Kg
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-11
ALR1200/901-201
Fil/file
PRODUCT SPECIFICATION
ALR1200-901_F.doc
COMPACT repeater with adjustable bandwidth 900 MHz version, EGSM, 15 MHz BW Product Number: ALR1200/901
1. Electrical specification (typical values)
The repeater complies with the requirements of ETS 300 609-4 Frequency tuning band Up link Frequency tuning band Down link Filter bandwidth standard, adjustable Filter setting resolution Duplex spacing Gain adjustment range Gain (max variation 25 to +55 C) Gain step resolution Filter sensitivity @ 400 kHz offset Filter sensitivity @ 600 kHz offset Filter sensitivity @ 1 MHz offset Output power, PEP Output power, 2 carrier Pass band ripple Max absolute group delay Noise figure at 70 dB gain, 25 C Maximum input power Receiver input port return loss Power supply voltage Power consumption 2. Environmental specification Temperature range Temperature range Casing class 3. Mechanical specification Dimensions. (W x H x D) Mechanical outline Weight RF-connectors Lock type 880 915 925 960 0.5 15 25 45 55-70 5 1 > 20 > 30 > 35 + 25 + 19 5 6 8 +13 14 85 - 265 55 MHz MHz MHz kHz MHz dB dB dB dB dB dB dBm dBm/carrier dB s dB dBm dB VAC W
15.2 x 15.2 x 4.3 385 x 385 x 110 See Compact Low < 22 < 10 N-type female Allgon Safety bolts
Inches mm lbs kg
Product
UA117 01/1 UA119 01/1
Description
OCM, Opto Coverter Module RCM, RF Combining Module
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2001-11-01
UA117 01/1-201
Fil/file
1 (2)
OCM_UA117 01-1_A
Features
Operation capability - Inbuilt input power meter (optic meter) - Optical output power, software controlled, two levels - IP addressing for supporting large system build out - Settable alarm thresholds (two levels) - Sub carrier for data communication over fiber, only one remote access point - Battery Back-up with charger - External alarm inputs with settable levels and polarity - R2R interface for communication between Allgon HW products via RS485 - RCC support - Remote software download - Compatible with OMT and OMS software
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2001-11-01
UA117 01/1-201
Fil/file
2 (2)
OCM_UA117 01-1_A
ETS300 019-2-4 ETS300 609-4 ETS300 342-3 IEC 801-2,4 and 5 IEC/EN 60 825-1 IEC/EN 609 50 Part 1040.10, 1998 IEC publication 65 1950 third Edition CAN/CVSA-C22.2 No 950-M95
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2001-11-01
UA116 01/1-201
Fil/file
1 (2)
RCM_UA116 01-1_A
Weight Temp range Weather protection RF connectors BTS IN/OUT RF connectors IN/OUT (to OCM)
Max +40 dBm RMS/port Max +36 dBm (depending on configuration) 50 Ohm Standard 19 W=412 (483 panel) D= 500 H= 88 (2U) Max 4 kg 0 to +50 C IP42 N-type female (Max 24) SMA-type female (Max 6)
Features The RCM has a modular design allowing: - single and multiband configurations - single and multi operator capability - Easy up gradable The RCM is designed in such way that electrical and mechanical data are fully compatible to Allgon approved sub components like: - Hybrid couplers in frequency range 800-2300 MHz - Duplex filters 800, 900, 1800, 1900 and 2100 MHz frequency bands - Diplex filters for combining 800/1900, 900/1800, 900/2100, 1800/2100 MHz Diplex/Duplex filters are supposed to work in the frequency bands with respect to standard duplex spacing like GSM (900/1800/1900), PCS, AMPS/TDMA/iDEN and UMTS
Max power handling capability of hybrid input connector. The input power and number of installed hybrid couplers must be in such way that the temperature of the RCM never will exceed 100 C. Forced air cooling is always to recommend.
Note 1
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2001-11-01
UA116 01/1-201
Fil/file
2 (2)
RCM_UA116 01-1_A
System
Single band 900 MHz Single band 1800 MHz Dual band 800/1900 MHz Dual band 900/1800 MHz
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2001-11-27
RCE200141-201
Fil/file
Output power (RMS) reference table (dBm) at antenna port No Carrier 900 2 +19 4 +14
Following parameters are adjustable in the system: RH: 55 70 dB, CM: optical transmitter/receiver attenuation range 0 20 dB.
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2001-11-27
RCE200141-201
Fil/file
Weight Temp range Weather protection RF connectors BTS IN/OUT RF connectors IN/OUT (to OCM)
Max +40 dBm RMS/port Max +36 dBm (depending on configuration) 50 Ohm Standard 19 W=412 (483 panel) D= 500 H= 88 (2U) Max 4 kg 0 to +50 C IP42 N-type female (Max 24) SMA-type female (Max 6)
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2001-11-27
RCE200141-201
Fil/file
Band width @ 3 dB Input impedance Laser transmitter optical wavelength Optical receiver wavelength Optical RF transmitter/receiver attenuation settable by SW in 1 dB steps Third order Ipin Receiver settable alarm level WARNING Receiver settable alarm level ERROR Supply voltage Package (sizes in mm)
800 2200 MHz 50 Ohm DFB 1310 or 1550 nm 1250 - 1600 nm 0 20 dB + 55 to +75 dBm 0 to -40 dBm in 1 dB steps 0 to -40 dBm in 1 dB steps 85 265 VAC Standard 19 W=412 (483 panel) D= 500 H= 88 (2U) Max 5 kg 0 to +50 C IP42 SMA-type female (max 6) FC-APC (max 24)
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2001-11-27
RCE200141-201
Fil/file
System Features Inbuilt input power meter (optic meter) Optical output power, software controlled, two levels IP addressing over Fiber To Fiber link (F2F) Settable alarm thresholds (two levels) Sub carrier for data communication over fiber Battery Back-up with charger External alarm inputs with settable levels and polarity R2R interface RCC support Remote software download Compatible with OMT and OMS software 5. Alarms Laser failure (Tx) No optic power received (Rx) Temperature Internal voltage Sub carrier link supervision External alarm
Note 1
In dual band applications calculate approx. 1 dB loss caused by the inbuilt diplex filters.
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2001-11-27
RCE200141-201
Fil/file
Management OMT (Operation & Maintenance Terminal) software for local and remote access mainly for installation and commissioning; PC connected via RS232 PC connected via modem in CM OMS (Operation & Maintenance System) software for fleet management T1 connected via modem in CM Software requirements OMT The OMT software package requires at least: Windows 95, 98 or NT version 4.0 or higher 8 MB of RAM (16 is recommended) 4 MB free hard disk space Software requirements OMS Intel Pentium II based computer, running at a minimum of 450 MHz 256 MB RAM 2000 MB available disk space Monitor capable of displaying a resolution of 1024 x 768 (1280 x 1024 recommended) Network card and TCP/IP protocol installed Windows NT4 with service pack 5 or higher Declaration of conformity - Environmental specification - Radio Transmission and Reception - EMC emission and immunity - EMC immunity - Electrical safety - Laser safety - UL - UL - FCC
ETS300 019-2-4 ETS300 609-4 ETS300 342-3 IEC 801-2,4 and 5 IEC publication 65 US Food and Drug Administration req. Part 1040.10, 1998 1950 third Edition CAN/CVSA-C22.2 No 950-M95 24E
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2001-11-27
RCE200141-201
Fil/file
Output power (RMS) reference table (dBm) at antenna port No Carrier 1800 2 +20 4 +15
Following parameters are adjustable in the system: RH: 55 70 dB, CM: optical transmitter/receiver attenuation range 0 20 dB. Upper and lower band is available
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2001-11-27
RCE200141-201
Fil/file
Weight Temp range Weather protection RF connectors BTS IN/OUT RF connectors IN/OUT (to OCM)
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2001-11-27
RCE200141-201
Fil/file
Band width @ 3 dB Input impedance Laser transmitter optical wavelength Optical receiver wavelength Optical RF transmitter/receiver attenuation settable by SW in 1 dB steps Third order Ipin Receiver settable alarm level WARNING Receiver settable alarm level ERROR Supply voltage Package (sizes in mm)
800 2200 MHz 50 Ohm DFB 1310 or 1550 nm 1250 - 1600 nm 0 20 dB + 55 to +75 dBm 0 to -40 dBm in 1 dB steps 0 to -40 dBm in 1 dB steps 85 265 VAC Standard 19 W=412 (483 panel) D= 500 H= 88 (2U) Max 5 kg 0 to +50 C IP42 SMA-type female (max 6) FC-APC (max 24)
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2001-11-27
RCE200141-201
Fil/file
System Features Inbuilt input power meter (optic meter) Optical output power, software controlled, two levels IP addressing over Fiber To Fiber link (F2F) Settable alarm thresholds (two levels) Sub carrier for data communication over fiber Battery Back-up with charger External alarm inputs with settable levels and polarity R2R interface RCC support Remote software download Compatible with OMT and OMS software 5. Alarms Laser failure (Tx) No optic power received (Rx) Temperature Internal voltage Sub carrier link supervision External alarm
Note 1
In dual band applications calculate approx. 1 dB loss caused by the inbuilt diplex filters.
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2001-11-27
RCE200141-201
Fil/file
Management OMT (Operation & Maintenance Terminal) software for local and remote access mainly for installation and commissioning; PC connected via RS232 PC connected via modem in CM OMS (Operation & Maintenance System) software for fleet management T1 connected via modem in CM Software requirements OMT The OMT software package requires at least: Windows 95, 98 or NT version 4.0 or higher 8 MB of RAM (16 is recommended) 4 MB free hard disk space Software requirements OMS Intel Pentium II based computer, running at a minimum of 450 MHz 256 MB RAM 2000 MB available disk space Monitor capable of displaying a resolution of 1024 x 768 (1280 x 1024 recommended) Network card and TCP/IP protocol installed Windows NT4 with service pack 5 or higher Declaration of conformity - Environmental specification - Radio Transmission and Reception - EMC emission and immunity - EMC immunity - Electrical safety - Laser safety - UL - UL - FCC
ETS300 019-2-4 ETS300 609-4 ETS300 342-3 IEC 801-2,4 and 5 IEC publication 65 US Food and Drug Administration req. Part 1040.10, 1998 1950 third Edition CAN/CVSA-C22.2 No 950-M95 24E
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2001-11-27
RCE200141-201
Fil/file
Output power (RMS) reference table (dBm) at antenna port No Carrier 900 1800 2 +19 +20 4 +14 +15
Following parameters are adjustable in the system: RH: 55 70 dB, CM: optical transmitter/receiver attenuation range 0 20 dB. Upper and lower band is available
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2001-11-27
RCE200141-201
Fil/file
RF Combining Module (RCM) RF in/out from BTS RF in/out to CM Impedance Package (sizes in mm) Max +40 dBm RMS/port Max +36 dBm (depending on configuration) 50 Ohm Standard 19 W=412 (483 panel) D= 500 H= 88 (2U) Max 4 kg 0 to +50 C IP42 N-type female (Max 24) SMA-type female (Max 6)
Weight Temp range Weather protection RF connectors BTS IN/OUT RF connectors IN/OUT (to OCM)
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2001-11-27
RCE200141-201
Fil/file
Band width @ 3 dB Input impedance Laser transmitter optical wavelength Optical receiver wavelength Optical RF transmitter/receiver attenuation settable by SW in 1 dB steps Third order IPin Receiver settable alarm level WARNING Receiver settable alarm level ERROR Supply voltage Package (sizes in mm)
800 2200 MHz 50 Ohm DFB 1310 or 1550 nm 1250 - 1600 nm 0 20 dB + 55 to +75 dBm 0 to -40 dBm in 1 dB steps 0 to -40 dBm in 1 dB steps 85 265 VAC Standard 19 W=412 (483 panel) D= 500 H= 88 (2U) Max 5 kg 0 to +50 C IP42 SMA-type female (max 6) FC-APC (max 24)
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2001-11-27
RCE200141-201
Fil/file
System Features Inbuilt input power meter (optic meter) Optical output power, software controlled, two levels IP addressing over Fiber To Fiber link (F2F) Settable alarm thresholds (two levels) Sub carrier for data communication over fiber Battery Back-up with charger External alarm inputs with settable levels and polarity R2R interface RCC support Remote software download Compatible with OMT and OMS software 5. Alarms Laser failure (Tx) No optic power received (Rx) Temperature Internal voltage Sub carrier link supervision External alarm
Note 1
In dual band applications calculate approx. 1 dB loss caused by the inbuilt diplex filters.
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2001-11-27
RCE200141-201
Fil/file
Management OMT (Operation & Maintenance Terminal) software for local and remote access mainly for installation and commissioning; PC connected via RS232 PC connected via modem in CM OMS (Operation & Maintenance System) software for fleet management T1 connected via modem in CM Software requirements OMT The OMT software package requires at least: Windows 95, 98 or NT version 4.0 or higher 8 MB of RAM (16 is recommended) 4 MB free hard disk space Software requirements OMS Intel Pentium II based computer, running at a minimum of 450 MHz 256 MB RAM 2000 MB available disk space Monitor capable of displaying a resolution of 1024 x 768 (1280 x 1024 recommended) Network card and TCP/IP protocol installed Windows NT4 with service pack 5 or higher Declaration of conformity - Environmental specification - Radio Transmission and Reception - EMC emission and immunity - EMC immunity - Electrical safety - Laser safety - UL - UL - FCC
ETS300 019-2-4 ETS300 609-4 ETS300 342-3 IEC 801-2,4 and 5 IEC publication 65 US Food and Drug Administration req. Part 1040.10, 1998 1950 third Edition CAN/CVSA-C22.2 No 950-M95 24E
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2002-01-26
RCE200150-201
Fil/file
Output power (RMS) reference table (dBm) at antenna port No Carrier CDMA TDMA GSM 1 +22 +25 +25 2 +17 +22 +22 4 +12 +17 +17
Following parameters are adjustable in the system: RH: 55 70 dB, CM: optical transmitter/receiver attenuation range 0 20 dB.
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2002-01-26
RCE200150-201
Fil/file
Weight Temp range Weather protection RF connectors BTS IN/OUT RF connectors IN/OUT (to CM)
Max +40 dBm RMS/port Max +36 dBm (depending on configuration) 50 Ohm Standard 19 W=412 (483 panel) D= 500 H= 88 (2U) Max 4 kg 0 to +50 C IP42 N-type female (Max 6) SMA-type female (Max 24)
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2002-01-26
RCE200150-201
Fil/file
Band width @ 3 dB Input impedance Laser transmitter optical wavelength Optical receiver wavelength RF transmitter/receiver attenuation settable by SW in 1 dB steps Receiver settable alarm level WARNING Receiver settable alarm level ERROR Supply voltage Package (sizes in mm)
800 2200 MHz 50 Ohm DFB 1310 or 1550 nm 1250 - 1600 nm 0 20 dB 0 to -40 dB 0 to -40 dBm 85 265 VAC Standard 19 W=412 (483 panel) D= 500 H= 88 (2U) Max 5 kg 0 to +50 C IP42 SMA-type female (max 6) FC-APC (max 24)
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2002-01-26
RCE200150-201
Fil/file
Max composit output power (IM 13 dBm) Max composit output power (IM 30 dBm) Max composit output power (IM 36 dBm) Max composit output power @ 4 antenna ports Max absolute group delay Noise figure @ 25 C Maximum input power Supply voltage Power consumption Dimension (WxHxD) in mm Weight Temp range Weather protection RF connectors
+ 29 dBm + 26 dBm + 25 dBm Above 6 dB/port 6 s 8 dB + 13 dBm 85 265 VAC 55 W 385x385x100 8 kg 0 to +50 C IP42 N-type female (max 4)
System Features Inbuilt input power meter (optic meter) Optical output power, software controlled, two levels IP addressing over Fiber To Fiber link (F2F) Settable alarm thresholds (two levels) Sub carrier for data communication Battery Back-up with charger External alarm inputs with settable levels and polarity R2R interface RCC support Remote software download Compatible with OMT and OMS software 5. Alarms Laser failure (Tx) No optic power received (Rx) Temperature Internal voltage Sub carrier link supervision External alarm
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2002-01-26
RCE200150-201
Fil/file
Operation Set-up and control of the system via OMT (Operation & Maintenance Terminal) software PC connected via RS232 PC connected via modem in CM Set-up, monitoring and control of the system via OMS (Operation & Maintenance System) software PC connected via modem in CM Software requirements OMT The OMT software package requires at least: Windows 95, 98 or NT version 4.0 or higher 8 MB of RAM (16 is recommended) 4 MB free hard disk space Software requirements OMS Intel Pentium II based computer, running at a minimum of 450 MHz 256 MB RAM 2000 MB available disk space Monitor capable of displaying a resolution of 1024 x 768 (1280 x 1024 recommended) Network card and TCP/IP protocol installed Windows NT4 with service pack 5 or higher Declaration of conformity - Environmental specification - Radio Transmission and Reception - EMC emission and immunity - EMC immunity - Electrical safety - Laser safety - UL - UL - FCC
ETS300 019-2-4 ETS300 609-4 ETS300 342-3 IEC 801-2,4 and 5 IEC publication 65 US Food and Drug Administration req. Part 1040.10, 1998 1950 third Edition CAN/CVSA-C22.2 No 950-M95 24E
Product
LinDAS Unit specification LinDAS System specification Allgon Fiber 19 rack BMU
COVERAGE SYSTEMS
Product Description
19 Rack mounted Base station Master Unit 19 Rack mounted Site Distribution Unit
COVERAGE SYSTEMS
Table of content
List of abbreviations ............................................................................. 2 General Information ............................................................................. 3 System Concept ................................................................................... 4 Features & Advantages ........................................................................ 5 Product Description.............................................................................. 6
POI Point Of Interconnect...................................................................................................................... 6 OCU - Optical Conversion Unit ............................................................................................................... 8 XCU Cross Coupling Unit ...................................................................................................................... 10
1 (13)
BMU BTS CH DAN DL ETS FCC FON IM LAN LED OMS OMT OCU PEP POI PSTN RF RH R2R RMS Rx SDU Tx UL VAC VDC WAN WDM XCU 3G
Base Station Master Unit Base station Transceiver System Central Hub Distributed Antenna Network Down Link European Telecommunication Standards Federal Communications Commission Fibre Optic Node Inter modulation Local Area Network Light Emitted Diode Operation & Maintenance System Operation & Maintenance Terminal Optical Conversion Unit Peak Envelope Power Point Of Interconnect Public Switched Telephone Network Radio Frequency Remote Hub Repeater to Repeater (communication link) Root Mean Square Receiver Site Distribution Unit Transmitter Up Link Voltage Alternating Current Voltage Direct Current Wide Area Network Wave length Division Multiplexing Cross Coupling Unit Third Generation mobile system
2 (13)
The products are based on the well-proven Allgon repeater platforms and focus on cost-effective coverage while maintaining quality and flexibility. Our standard repeater and fiber optic products are successfully used in RF applications for subways, road tunnels and airports. These applications exist in harsh environments and require equipment with a special focus on robust mechanical design, weather protection while providing for high level of supervision and control.
3 (13)
The SDU consists of two types of modules. OCU POI Optical Conversion Unit Point Of Interconnect
4 (13)
5 (13)
OCU RF IN/OUT
Figure 2. POI
6 (13)
COVERAGE SYSTEMS
Note! The POI is customer configurable. Not used connectors (blind holes) are protected with a cover plate.
Main characteristics RF in/out from BTS RF in/out to OCU Impedance Package (sizes in mm)
Weight Temp range Weather protection RF connectors BTS IN/OUT RF connectors IN/OUT (to OCU) Cross coupling connectors IN/OUT
Max +50 dBm total RMS Note 1 Max +40 dBm RMS/port Note 1 Max +36 dBm (depending on configuration) 50 Ohm Standard 19 W=412 (483 panel) D= 500 H= 132,5 (3U) Max 5 kg 0 to +50 C IP42 N-type and/or 7/16 female (Max 12) SMA-type female (Max 8) SMA-type female (Max 32)
Note 1
Max power handling capability of hybrid input connector. The input power and number of installed hybrid couplers must be in such way that the temperature of the POI never will exceed 100 C. Forced air cooling is always to recommend. 7 (13)
Mains switch
WLI - Wire link interface for communication between different units in a repeatre
Figure 3. OCU
8 (13)
Note! The OCU is customer configurable. Not used connectors (blind holes) are protected with a cover plate Main characteristics Band width @ 3 dB Input impedance Max RF input power Laser transmitter optical wavelength Optical receiver wavelength Optical RF transmitter/receiver attenuation settable by SW in 1 dB steps Third order IPin Receiver settable alarm level WARNING Receiver settable alarm level ERROR Supply voltage Package (sizes in mm)
800 2200 MHz 50 Ohm +36 dBm DFB 1310 or 1550 nm 1250 - 1600 nm 0 20 dB + 55 to +75 dBm 0 to -40 dBm in 1 dB steps 0 to -40 dBm in 1 dB steps 85 265 VAC Standard 19 W=412 (483 panel) D= 500 H= 177 (4U) Max 10 kg 0 to +50 C IP42 SMA-type female (max 8) DIN-APC (max 32)
9 (13)
POI RF IN/OUT
Figure 4. XCU
10 (13)
COVERAGE SYSTEMS
Main characteristics RF in/out from BTS RF in/out to POI Impedance Package (sizes in mm) Max +50 dBm total RMS Note 1 Max +40 dBm RMS/port Note 1 Max +36 dBm 50 Ohm Standard 19 W=412 (483 panel) D= 500 H= 132,5 (3U) Max 5 kg 0 to +50 C IP42 N-type and/or 7/16 female (Max 12) SMA-type female (Max 4) SMA-type female (Max 40)
Weight Temp range Weather protection RF connectors BTS IN/OUT RF connectors IN/OUT (to POI) Cross coupling connectors IN/OUT
Note 1
Max power handling capability of hybrid input connector. The input power and number of installed hybrid couplers must be in such way that the temperature of the RCM never will exceed 100 C. Forced air cooling is always to recommend. 11 (13)
12 (13)
Product list
2002-12-19
Product nr. ABR5500/00101 ALM1200/00202 ALM2200/00202 ALR1200/00101 ALR1200/00102 ALR1200/00201 ALR1200/00202 ALR1200/00401 ALR1200/00402 ALR1200/04201 ALR1200/04202 ALR1200/90101 ALR1200/90102 ALR1212/00101 ALR1212/00102 ALR1212/00201 ALR1212/00202 ALR2200/00101 ALR2200/00102 ALR2200/00201 ALR2200/00202 ALR2200/90101 ALR2200/90102 ALR2200/90201 ALR2200/90202 ALR2212/00101 ALR2212/00102 ALR2212/90101 ALR2212/90102 ALR2222/00101 ALR2222/00102 ALR2222/09501 ALR2222/09502 ALR3200/00101 ALR3200/00102 ALR3200/90101 ALR3200/90102 ALR3232/00101 ALR3232/00102 ALR3232/09501 ALR3232/09502 ALR3232/90101 ALR3232/90102 ALR3242/00101 ALR3242/00102 ALR3242/00301 ALR3242/00302 ALR3242/90201 ALR3242/90202
Information Repeater DMB-1500 Mhz Compact Maritime 900 MHz ABW 25 MHz, RCC Compact Maritime 1800 MHz ABW 25 MHz, RCC Compact 900 MHz, ABW 15 MHz Compact 900 MHz, ABW 15 MHz, RCC Compact 900 MHz, ABW 25 MHz Compact 900 MHz, ABW 25 MHz, RCC Compact 900 MHz, ABW 25 MHz, DC Compact 900 MHz, ABW 25 MHz, DC, RCC Compact 900 MHz, ABW 25 MHz China Compact 900 MHz, ABW 25 MHz, RCC, China Compact 900 MHz EGSM, ABW 15 MHz Compact 900 MHz EGSM, ABW 15 MHz, RCC Compact Dual 900 15 MHz Compact Dual 900 15 MHz, RCC Compact Dual 900 25 MHz Compact Dual 900 25 MHz, RCC Compact BS-1800 LB 15 Compact BS-1800 LB 15 RCC Compact BS-1800 LB 25 MHz Compact BS-1800 LB 25 MHz RCC Compact BS-1800 UB 15 Compact BS-1800 UB 15 RCC Compact BS-1800 UB 25 MHz Compact BS-1800 UB 25 MHz RCC Compact BS Dual1800/900 LB Compact Dual 1800/ 900 15 MHz, RCC Compact.BS Dual 1800/900 UB Compact.BS Dual 1800/900 UB, RCC Compact BS Dual 1800 15 Compact BS Dual 1800 15 RCC Compact BS Dual 1800 15 LB, UB 1 service 1 donor Compact BS Dual 1800 15 LB, UB 1 service 1 donor RCC Compact BS1900 LB Compact BS1900 LB, RCC GSM Compact BS1900 UB Compact BS1900 UB, RCC GSM Compact Dual 1900 LB Compact Dual 1900 LB, RCC GSM Compact Dual 1900 LB, UB 1 service 1 donor Compact Dual 1900 LB, UB 1 service 1 donor RCC GSM Compact Dual 1900 UB Compact Dual 1900 UB, RCC GSM Compact Dual 1900/800 LB 15+15 MHz Compact Dual 1900/800 LB 15+15 MHz RCC GSM Compact Dual 1900/800 LB 15+15 MHz 1 service 2 donor Compact Dual 1900/800 LB 15+15 MHz 1 service 2 donor, RCC GSM Compact Dual 1900/800 UB 25+25 MHz Compact Dual 1900/800 UB 25+25 MHz, RCC GSM
ALR3242/90301 ALR3242/90302 ALR3242/00501 ALR3242/00502 ALR3242/90501 ALR3242/90502 ALR3246/00301 ALR4200/00101 ALR4200/00102 ALR4200/00201 ALR4200/00202 ALR4242/00101 ALR4242/00102 ALR4600/00101 ALT1200/00202 ALT2200/00202 AM1200/00202 AM2200/00202 AR1100/00201 AR1100/00202 AR1100/00203 AR1100/00204 AR1100/00205 AR1100/00206 AR1100/00207 AR1100/00208 AR1100/00401 AR1100/00402 AR1100/00403 AR1100/00404 AR1100/00405 AR1100/00406 AR1100/00407 AR1100/00408 AR1100/80201 AR1100/80202 AR1100/80203 AR1100/80204 AR1100/80205 AR1100/80206 AR1100/90202 AR1100/90204 AR1100/90206 AR1100/90401 AR1100/90402 AR1100/90404 AR1100/90406 AR1111/00601 AR1111/00602 AR1111/00603 AR1111/00604 AR1111/00605 AR1111/00606 AR1111/00801 AR1111/00802 AR1111/00803
Compact Dual 1900/800 UB 15+15 MHz 1 service 2 donor Compact Dual 1900/800 UB 15+15 MHz 1 service 2 donor, RCC GSM Compact Dual 1900/800 LB 15+15 MHz 1 service 1 donor Compact Dual 1900/800 LB 15+15 MHz 1 service 1 donor. RCC GSM Compact Dual 1900/800 UB 15+15 MHz 1 service 1 donor Compact Dual 1900/800 UB 15+15 MHz 1 service 1 donor, RCC GSM Compact Dual 1900/800 SMR LB 15+15 MHz 1 service 2 donor Compact BS 800 15 MHz Compact BS 800 15 MHz, RCC TDMA Compact BS 800 25MHz Compact BS 800 25MHz, RCC TDMA Compact Dual 800 15 Compact Dual 800 15 RCC TDMA Compact 800 SMR-IDEN Compact In-Train 900, 25 MHz, RCC Compact In-Train 1800, 25 MHz, RCC Repeater Maritime 900 MHz, 25 MHz, RCU Repeater Maritime 1800 MHz, 25 MHz, RCU Repeater GSM900 2 ch 230VAC Repeater GSM900 2 ch 230VAC, RCU Repeater GSM900 2 ch 24VDC Repeater GSM900 2 ch 24VDC, RCU Repeater GSM900 2 ch 48 VDC Repeater GSM900 2 ch 48, RCU Repeater GSM900 2 ch 115VDC Repeater GSM900 2 ch 115VDC, RCU Repeater GSM900 4 ch 230VAC Repeater GSM900 4 ch 230VAC, RCU Repeater GSM900 4 ch 24VDC Repeater GSM900 4 ch 24VDC, RCU Repeater GSM900 4 ch 48 VDC Repeater GSM900 4 ch 48 VDC, RCU Repeater GSM900 4 ch 115VAC Repeater GSM900 4 ch 115VAC, RCU Repeater RGSM900 2 ch 230VAC Repeater RGSM900 2 ch 230VAC, RCU Repeater RGSM900 2 ch 24VDC Repeater RGSM900 2 ch 24VDC+RCU Repeater RGSM900 2 ch 48VDC Repeater RGSM900 2 ch 48VDC, RCU Repeater EGSM 2 ch 230VAC, RCU Repeater EGSM 2 ch 24VDC, RCU. Repeater EGSM 2 ch 48VDC, RCU. Repeater EGSM 4 ch 230VAC. Repeater EGSM 4 ch 230VAC, RCU. Repeater EGSM 4 ch 24VDC, RCU Repeater EGSM 4 ch 48VDC, RCU Repeater GSM900 6 ch 230VAC Repeater GSM900 6 ch 230VAC, RCU Repeater GSM900 6 ch 24VDC Repeater GSM900 6 ch 24VDC, RCU Repeater GSM900 6 ch 48VDC Repeater GSM900 6 ch 48VDC, RCU Repeater GSM900 8 ch 230VAC Repeater GSM900 8 ch 230VAC, RCU Repeater GSM900 8 ch 24VDC
AR1111/00804 AR1111/04201 AR1111/04202 AR1111/04401 AR1111/04402 AR1111/90601 AR1111/90602 AR1111/90606 AR1111/90801 AR1111/90802 AR1111/90806 AR1200/04301 AR1200/04302 AR1200/05201 AR1200/05202 AR1200/05203 AR1200/05204 AR1200/05301 AR1200/05302 AR1200/95201 AR1200/95202 AR1200/95203 AR1200/95204 AR1212/05201 AR1212/05202 AR1212/05203 AR1212/05204 AR2100/00201 AR2100/00202 AR2100/00203 AR2100/00204 AR2100/00207 AR2100/00208 AR2100/00401 AR2100/00402 AR2100/00407 AR2100/00408 AR2100/90201 AR2100/90202 AR2100/90207 AR2100/90208 AR2100/90401 AR2100/90402 AR2111/02201 AR2111/02401 AR2111/04401 AR2111/04402 AR2111/54401 AR2111/54402 AR2111/94401 AR2111/94402 AR2121/00601 AR2121/00602 AR2121/00606 AR2121/00801 AR2121/00802
Repeater GSM900 8 ch 24VDC, RCU Repeater Dual Cell GSM 900 4+2 ch 230VAC Repeater Dual Cell GSM 900 4+2 ch 230VAC, RCU Repeater Dual Cell GSM 900 4+4 ch 230VAC Repeater Dual Cell GSM 900 4+4 ch 230VAC, RCU Repeater EGSM 6 ch 230VAC Repeater EGSM 6 ch 230VAC, RCU Repeater EGSM 6 ch 48VDC, RCU Repeater EGSM 8 ch 230VAC Repeater EGSM 8 ch 230VAC, RCU Repeater EGSM 8 ch 48VDC, RCU Repeater, BS 25 MHz 230 VAC, China Repeater, BS 25 MHz 230 VAC, RCU, China Repeater, BS 16,5 MHz 230VAC Repeater, BS 16,5MHz 230VAC, RCU Repeater, BS 16,5MHz 21-60VDC Repeater, BS 16,5MHz 21-60VDC, RCU Repeater, BS 25 MHz 230VAC Repeater, BS 25 MHz 230VAC, RCU Repeater, EGSM, BS 16,9 MHz 230VAC Repeater, EGSM, BS 16,9 MHz 230VAC, RCU Repeater, EGSM, BS 16,9 MHz 21-60VDC Repeater, EGSM, BS 16,9 MHz 21-60VDC, RCU Repeater, Dual BS 900. 16,9 MHz 230VAC Repeater, Dual BS 900. 16,9 MHz 230VAC, RCU Repeater, Dual BS 900. 16,9 MHz 21-60VDC Repeater, Dual BS 900. 16,9 MHz 21-60VDC, RCU Repeater DCS-1800 2 ch.LB 230VAC Repeater DCS-1800 2 ch.LB 230VAC, RCU Repeater DCS-1800 2 ch.LB 24VDC Repeater DCS-1800 2 ch.LB 24VDC RCU Repeater DCS-1800 2 ch LB 115VAC Repeater DCS-1800 2 ch.LB 115VAC, RCU Repeater DCS-1800 4 ch.LB 230VAC Repeater DCS-1800 4 ch.LB 230VAC,RCU Repeater DCS-1800 4 ch.LB 115VAC Repeater DCS-1800 4 ch.LB 115VAC, RCU Repeater DCS-1800 2 ch.UB 230VAC Repeater DCS-1800 2 ch.UB 230VAC, RCU Repeater DCS-1800 2 ch UB 115VAC Repeater DCS-1800 2 ch UB 115VAC, RCU Repeater DCS-1800 4 ch.UB 230VAC Repeater DCS-1800 4 ch.UB 230VAC, RCU Repeater Dual 1800/900 2+2 ch LB 230VAC Repeater Dual 1800/900 2+4 ch LB 230VAC Repeater Dual 1800/900 4+4 ch LB 230VAC Repeater Dual 1800/900 4+4 ch LB 230VAC RCU Repeater Dual 1800/900 4+4 ch FB 230VAC Repeater Dual 1800/900 4+4 ch FB 230VAC RCU Repeater Dual 1800/900 4+4 ch UB 230VAC Repeater Dual 1800/900 4+4 ch UB 230VAC, RCU Repeater DCS-1800 6 ch LB 230VAC Repeater DCS-1800 6 ch LB 230VAC RCU Repeater DCS-1800 6 ch LB 48VDC RCU Repeater DCS-1800 8 ch LB 230VAC Repeater DCS-1800 8 ch LB 230VAC, RCU
AR2121/00806 AR2121/90601 AR2121/90602 AR2121/90801 AR2122/02101 AR2122/02107 AR2142/04201 AR2142/04202 AR2142/04207 AR2200/00101 AR2200/00102 AR2200/00103 AR2200/00104 AR2200/00107 AR2200/00108 AR2200/90101 AR2200/90102 AR2200/90103 AR2200/90104 AR2212/95201 AR2212/95202 AR2212/95203 AR2212/95204 AR2222/00207 AR3100/00201 AR3100/00204 AR3100/00207 AR3100/00401 AR3100/00404 AR3100/00407 AR3100/00408 AR3100/50201 AR3100/50207 AR3100/50401 AR3100/50404 AR3100/50407 AR3100/90201 AR3100/90207 AR3131/02201 AR3131/04401 AR3131/92201 AR3400/00101 AR3400/00103 AR3400/00104 AR3400/00107 AR3400/01101 AR3400/01102 AR3400/01103 AR3400/01104 AR3430/01101 AR3430/01102 AR3400/90101 AR3400/90103 AR3400/90104 AR3400/90107 AR3400/91101
Repeater DCS-1800 8 ch LB 48VDC, RCU Repeater DCS-1800 6 ch UB 230VAC Repeater DCS-1800 6 ch UB 230VAC RCU Repeater DCS-1800 8 ch UB 230VAC Repeater DCS-1800 2 ch/BS 16,9 LB 230VAC Repeater DCS-1800 2 ch/BS 16,9 LB 115VAC Repeater Dual 1800 4 CH/800 BS 230VAC Repeater Dual 1800 4 CH/800 BS 230VAC RCU Repeater Dual 1800 4 CH/800 BS 115VAC Repeater BS1800 LB adj 16,9 MHZ 230VAC Repeater BS1800 LB adj 16,9 MHz 230VAC, RCU Repeater BS1800 LB adj 16,9 MHz 21-60VDC Repeater BS1800 LB adj 16,9 MHz 21-60VDC, RCU Repeater BS1800 LB adj 16,9 MHz 115VAC Repeater BS1800 LB adj 16,9 MHz 115VAC, RCU Repeater BS1800 UB adj 16,9 MHz 230VAC Repeater BS1800 UB adj 16,9 MHz 230VAC, RCU Repeater BS1800 UB adj 16,9 MHz 21-60VDC Repeater BS1800 UB adj 16,9 MHz 21-60VDC, RCU Repeater Dual BS1800/BS900 UB 230VAC Rep. Dual BS1800/BS900 UB 230VAC, RCU Rep. Dual BS1800/BS900 UB 21-60VDC Rep. Dual BS1800/BS900 UB 21-60VDC, RCU Rep. Dual BS1800 LB 115VAC Repeater GSM1900 2 ch.LB 115 VAC Repeater GSM1900 2 ch.LB 24 VDC, RCU Repeater GSM1900 2 ch.LB 230VAC Repeater GSM1900 4 ch.LB 115VAC Repeater GSM1900 4 ch.LB 24VDC, RCU Repeater GSM1900 4 ch.LB 230VAC Repeater GSM1900 4 ch.LB 230VAC RCU Repeater GSM1900 2 ch FB, 115 V Repeater GSM1900 2 ch FB, 230 V Repeater GSM1900 4 ch FB 115VAC Repeater GSM1900 4 ch FB 24VDC RCU Repeater GSM1900 4 ch FB 230VAC Repeater GSM1900 2 ch.UB 115VAC Repeater GSM1900 2 ch UB 230VAC Repeater Dual GSM1900 2+2 CH LB 115VAC Repeater Dual GSM1900 4+4 CH LB 115VAC Repeater Dual GSM1900 2+2 CH UB 115VAC Repeater BS 1900 LB, 115 V Repeater BS 1900 LB, 21-60VDC Repeater BS 1900 LB, 21-60VDC, RCU Repeater BS 1900 LB, 230 V Repeater BS CDMA 1900 LB, 115 V Repeater BS CDMA 1900 LB, 115 V RCU Repeater BS CDMA 1900 LB, 21-60VDC Repeater BS CDMA 1900 LB, 21-60VDC, RCU Repeater BS CDMA 1900 LB HP, 115 V Repeater BS CDMA 1900 LB HP, 115 V RCU Repeater BS 1900 UB 115VAC Repeater BS 1900 UB 21-60VDC Repeater BS 1900 UB 21-60VDC, RCU Repeater BS 1900 UB 230VAC Repeater BS CDMA 1900 UB, 115 V
AR3400/91102 AR3430/91101 AR3430/91102 AR3434/00101 AR3434/51101 AR3434/51102 AR3434/51103 AR3434/51104 AR3442/05201 AR3442/05301 AR3442/05303 AR3446/01101 AR3500/00101 AR3500/00103 AR3500/00104 AR3500/00107 AR3500/05101 AR3500/05103 AR3500/05104 AR3500/05107 AR3500/90101 AR3500/90103 AR3500/90104 AR3500/90107 AR3500/95107 AR3530/05101 AR3530/05103 AR3530/05104 AR3530/05107 AR3530/95101 AR3530/95102 AR3530/95103 AR3530/95104 AR3530/95107 AR3535/95107 AR3434/51101 AR3434/51102 AR3434/51103 AR3434/51104 AR3535/00201 AR3535/00202 AR3535/00203 AR3535/00204 AR3535/00207 AR3535/02201 AR3535/02202 AR3535/02203 AR3535/02204 AR3535/02207 AR3535/90201 AR3535/90202 AR3535/90203 AR3535/90204 AR3535/90207 AR3535/90208 AR3535/92201
Repeater BS CDMA 1900 UB, 115 V RCU Repeater BS CDMA 1900 UB HP, 115 V Repeater BS CDMA 1900 UB HP, 115 V RCU Repeater Dual BS 1900 TDMA LB 115VAC Repeater Dual BS 1900 CDMA FB 115VAC Repeater Dual BS 1900 CDMA FB 115VAC, RCU Repeater Dual BS 1900 CDMA FB 21-60VDC Repeater Dual BS 1900 CDMA FB 21-60VDC, RCU Repeater Dual BS1900/800 LB 115VAC Repeater Dual BS1900/800 LB, 25 MHz 115VAC Repeater Dual BS1900/800 LB, 25 MHz 24VDC Repeater Dual BS CDMA 1900/800 SMR LB, 115 VAC Repeater CDMA-1900 2 CH 115VAC LB Repeater CDMA-1900 2 CH 21-60VDC LB Repeater CDMA-1900 2 CH 21-60VDC, RCU LB Repeater CDMA-1900 2 CH 230VAC LB Repeater CDMA-1900 2 CH MRX 115VAC LB Repeater CDMA-1900 2 CH MRX 21-60VDC LB Repeater CDMA-1900 2 CH MRX 21-60VDC, RCU LB Repeater CDMA-1900 2 CH MRX 230VAC LB Repeater CDMA-1900 UB 2 CH 115VAC Repeater CDMA-1900 UB 2 CH 21-60VDC Repeater CDMA-1900 UB 2 CH 21-60VDC, RCU Repeater CDMA-1900 UB 2 CH 230VAC Repeater CDMA-1900 UB 2 CH MRX 230VAC Repeater CDMA-1900 MRX HP 2 CH 115VAC LB Repeater CDMA-1900 MRX HP 2 CH 21-60VDC LB Repeater CDMA-1900 MRX HP 2 CH 21-60VDC, RCU LB Repeater CDMA-1900 MRX HP 2 CH 230VAC LB Repeater CDMA-1900 MRX HP 2 CH 115VAC UB Repeater CDMA-1900 MRX HP 2 CH 115VAC UB RCU Repeater CDMA-1900 MRX HP 2 CH 24VDC UB Repeater CDMA-1900 MRX HP 2 CH 24VDC UB RCU Repeater CDMA-1900 MRX HP 2 CH 230VAC UB Repeater CDMA-1900 MRX 4 CH 230VAC UB Repeater Dual CDMA 1900 BS, 16,5 MHz, LB, UB Repeater Dual CDMA 1900 BS, 16,5 MHz, LB, UB RCU Repeater Dual CDMA 1900 BS, 16,5 MHz, 21-60VDC LB, UB Repeater Dual CDMA 1900 BS, 16,5 MHz, 21-60 VDC LB, UB RCU Repeater CDMA-1900 4 CH 115VAC LB Repeater CDMA-1900 4 CH 115VAC LB, RCU Repeater CDMA-1900 4 CH 21-60 VDC LB Repeater CDMA-1900 4 CH 21-60 VDC LB, RCU Repeater CDMA-1900 4 CH 230VAC LB Repeater CDMA-1900 2+2 CH 115VAC LB Repeater CDMA-1900 2+2 CH 115VAC, RCU LB Repeater CDMA-1900 2+2 CH 21-60VDC LB Repeater CDMA-1900 2+2 CH 21-60VDC, RCU LB Repeater CDMA-1900 2+2 CH 230VAC LB Repeater CDMA-1900 4 CH 115VAC UB Repeater CDMA-1900 4 CH 115VAC UB, RCU Repeater CDMA-1900 4 CH 21-60VDC UB Repeater CDMA-1900 4 CH 21-60VDC UB, RCU Repeater CDMA-1900 4 CH 230VAC UB Repeater CDMA-1900 4 CH 230VAC UB, RCU Repeater CDMA-1900 2+2 CH UB 115VAC
AR3535/92202 AR3535/92203 AR3535/92204 AR3535/92207 AR3535/95107 AR3542/05201 AR3542/05203 AR3542/05204 AR4200/01201 AR4200/01202 AR4200/01203 AR4200/01204 AR4200/01207 AR4200/01208 AR4200/05201 AR4200/05203 AR4200/05204 AR4200/05207 AR4200/05301 AR4200/05303 AR4200/05304 AR4200/05307 AR4240/01201 AR4240/01202 AR4240/01203 AR4240/01204 AR4240/01207 AR4240/01208 AR4242/01101 AR4242/01102 AR4242/01103 AR4242/01104 AR4242/01107 AR4242/01108 AR4242/01207 AR4242/05201 AR4242/05203 AR4242/05204 AR4242/05207 AR4500/00141 AR4500/00142 AR4500/00147 AR4500/05141 AR4500/05142 AR4500/05147 AR4500/05148 AR4540/05141 AR4540/05142 AR4540/05147 AR4540/05148 AR4545/00201 AR4545/00202 AR4545/00203 AR4545/00204 AR4545/00207 AR4545/00208
Repeater CDMA-1900 2+2 CH UB 115VAC, RCU Repeater CDMA-1900 2+2 CH UB 21-60VDC Repeater CDMA-1900 2+2 CH UB 21-60VDC, RCU Repeater CDMA-1900 2+2 CH UB 230VAC Repeater CDMA-1900 4 CH UB MRX 230VAC Repeater Dual CDMA1900/BS800 115VAC LB Repeater Dual CDMA1900/BS800 21-60VDC LB Repeater Dual CDMA1900/BS800 21-60VDC, RCU LB Repeater BS CDMA 800, 25 MHz 230 V Repeater BS CDMA 800, 25 MHz 230 V RCU Repeater BS CDMA 800, 25 MHz 21-60VDC Repeater BS CDMA 800, 25 MHz 21-60VDC RCU Repeater BS CDMA 800, 25 MHz 115VAC Repeater BS CDMA 800, 25 MHz 115 VAC RCU Repeater BS 800 16,9 230VAC Repeater BS 800 16,9 21-60VDC Repeater BS 800 16,9 21-60VDC, RCU Repeater BS-800 16,9 115VAC Repeater BS 800 25 230VAC Repeater BS 800 25 21-60VDC Repeater BS 800 25 21-60VDC, RCU Repeater BS 800 25 115VAC Repeater BS CDMA 800 HP, 25 MHz 230 VAC Repeater BS CDMA 800 HP, 25 MHz 230 VAC RCU Repeater BS CDMA 800 HP, 25 MHz 21-60 VDC Repeater BS CDMA 800 HP, 25 MHz 21-60 VDC RCU Repeater BS CDMA 800 HP, 25 MHz 115 VAC Repeater BS CDMA 800 HP, 25 MHz 115 VAC RCU Repeater Dual BS CDMA 800 16,9 230VAC Repeater Dual BS CDMA 800 16,9 230VAC, RCU Repeater Dual BS CDMA 800 16,9 21-60VDC Repeater Dual BS CDMA 800 16,9 21-60VDC, RCU Repeater Dual BS CDMA 800 16,9 115VAC Repeater Dual BS CDMA 800 16,9 115VAC, RCU Repeater Dual BS CDMA 800 25 MHz 115VAC Repeater Dual BS 800 16,9 230VAC Repeater Dual BS 800 16,9 21-60VDC Repeater Dual BS 800 16,9 21-60VDC, RCU Repeater Dual BS 800 16,9 115VAC Repeater CDMA-800 2 CH 230VAC Repeater CDMA-800 2 CH 230VAC, RCU Repeater CDMA-800 2 CH 115VAC Repeater CDMA-800 2 CH 230VAC, MRX Repeater CDMA-800 2 CH 230VAC, RCU, MRX Repeater CDMA-800 2 CH 115VAC, MRX Repeater CDMA-800 2 CH 115VAC, MRX, RCU Repeater CDMA-800 2 CH 230VAC, MRX HP Repeater CDMA-800 2 CH 230VAC, MRX, HP, RCU Repeater CDMA-800 2 CH 115VAC, MRX, HP Repeater CDMA-800 2 CH 115VAC, MRX, HP, RCU Repeater CDMA-800 4 CH 230VAC Repeater CDMA-800 4 CH 230VAC, RCU Repeater CDMA-800 4 CH 21-60VDC Repeater CDMA-800 4 CH 21-60VDC, RCU Repeater CDMA-800 4 CH 115VAC Repeater CDMA-800 4 CH 115VAC, RCU
AR4545/02241 AR4545/02243 AR4545/02244 AR4545/02247 AR4600/05201 AR4600/05203 AR4600/05204 AR4600/05207 AR6500/00101 AR6500/00102 AR6500/00103 AR6500/00104 AR6560/00101 AR6560/00102 AR6560/00103 AR6560/00104 AR6565/02201 AR6565/02202 AR6565/02203 AR6565/02204 EA101 02/1 EA101 09/1 EA101 10/5 EA101 10/6 EA101 12/1 EA101 14/1 EA101 16/1 EA101 19/1 EA101 20/1 EA101 21/1 EA101 22/1 EA101 25/1 EA101 31/1 EA101 32/1 EA101 33/1 EA101 35/1 EA101 35/2 EA101 36/1 EA101 36/2 EA101 37/1 EA101 37/2 EA101 38/1 EA101 38/2 EA101 39/1 EA101 43/1 EA101 47/1 EA101 47/2 EA101 48/1 EA101 49/1 EA101 50/1 EA101 52/1 EA101 54/1 EA101 56/1 EA101 57/1 EA101 58/1 EA101 59/1
Repeater CDMA-800 2+2 CH 230VAC Repeater CDMA-800 2+2 CH 21-60VDC Repeater CDMA-800 2+2 CH 21-60VDC, RCU Repeater CDMA-800 2+2 CH 115VAC Repeater BS 800 SMR IDEN 230VAC Repeater BS 800 SMR IDEN 21-60VDC Repeater BS 800 SMR IDEN 21-60VDC, RCU Repeater BS 800 SMR IDEN 115VAC Repeater W-CDMA 1-2 Ch 230VAC Repeater W-CDMA 1-2 Ch 230VAC, RCU Repeater W-CDMA 1-2 Ch 21-60VDC Repeater W-CDMA 1-2 Ch 21-60VDC, RCU Repeater W-CDMA 1-2 Ch, HP 230VAC Repeater W-CDMA 1-2 Ch, HP 230VAC, RCU Repeater W-CDMA 1-2 Ch, HP 21-60VDC Repeater W-CDMA 1-2 Ch, HP 21-60VDC, RCU Repeater W-CDMA 3-4 Ch 230VAC Repeater W-CDMA 3-4 Ch 230VAC, RCU Repeater W-CDMA 3-4 Ch 21-60VDC Repeater W-CDMA 3-4 Ch 21-60VDC, RCU Software kit English Weather Shield kit RCU Kit GSM-1900, Wavecom RCU Kit GSM 900/1800, Wavecom Door switch kit Expansion Kit 2->4 ch. 1900 MHz Expansion Kit 4->6 ch. 900 MHz Expansion Kit 2->4 ch. 1800 MHz Expansion Kit EGSM 2-4 ch Expansion Kit EGSM 4-6 ch Expansion Kit 900MHz 2-4ch Expansion Kit AMPS Expansion Kit 4-8 ch. 900MHz Dual band Kit 900, adj 16.5 MHz Dual band Kit 1800, 2 ch. LB POI 900/1800 Kit, 1-port, N-type POI 900/1800 Kit, 1-port, 7/16-type POI 900/1800 Kit, 2-port, N-type POI 900/1800 Kit, 2-port, 7/16-type POI 800/1900 Kit, 1-port, N-type POI 800/1900 Kit, 1-port, 7/16-type POI 800/1900 Kit, 2-port, N-type POI 800/1900 Kit, 2-port, 7/16-type Fiber Optic Installation Kit Expansion Kit 4-8 ch. 1800MHz R2R-Kit Internal R2R-Kit External Expansion Kit 4-6 ch. 1800MHz RCC KIT 900, Wavecom RCC KIT 1800, Wavecom RCC KIT 1900, Wavecom Expansion Kit CDMA1900 Mhz Dual band Kit BS 1800 Mhz Pole mounting bracket for Compact Expansion Kit 4->6 ch 1900 Mhz Repeater Tool Kit
EA101 60/1 EA101 61/1 EA101 63/1 EA101 64/1 EA101 65/1 EA101 66/1 EA101 70/1 EA101 73/1 EA101 74/1 EA101 75/1 EA101 75/3 EA101 76/1 EA101 77/1 EA101 78/1 EA101 78/2 RL102 00/01 RL102 01/01 RL104 00/01 RL104 01/01 RL104 01/02 RL105 00/01 RL105 01/01 RL105 01/02 RS108/1 RS108/2 RS108/3 RS108/4 RS108/7 UA102 04/1 UA102 04/2 UA104 04/1 UA104 04/1 UA104 04/1 UA104 04/1 UA104 04/1 UA104 04/1 UA104 04/1 UA104 04/1 UA104 04/1 UA104 04/1 UA109 00/1 UA109 01/1-A UA109 01/1-B UA109 01/1-C UA109 01/1-D UA109 01/1-WA UA109 01/1-WB UA109 01/1-WC UA109 01/1-WD UA111 00/1 UA111 01/1-SS11L UA111 01/1-SS22L UA111 01/1-St12L UA111 01/1-St13L UA111 01/1-St14L UA111 01/1-St23L
Key Kit Compact Fiber Optic Maintenance Kit RCU Kit CDMA 800, Sierra RCU Kit CDMA 1900, Sierra RCU Kit TDMA 800 RCC Kit Wireline modem Expansion Kit WCDMA 1-2 CH Hinge kit RCC Kit TDMA 800 RCC Kit CDMA 800 RCC Kit CDMA 1900 RCC Kit GSM 900/1800 Expansion Kit Compact 1800, 15 MHz Expansion Kit Compact 900, 15 MHz Expansion Kit Compact 900, 25 MHz OMS Nokia Alarm Interface Demo OMS Nokia Alarm Interface Lic. OMS Single User, Demo Version OMS Single User License OMS Single User License Add. OMS Multi User, Demo Version OMS Multi User License 5 users OMS Multi User License Add. OMS Single User Ann. Sup. & UG OMS Single User Add. Sup. & UG OMS Multi User Ann. Sup. & UG OMS Multi User Add An Sup.& UG OMS Nokia Alarm In An Sup.& UG BBU 25Ah with 24VDC output BBU 50Ah with 24VDC output Solar Panel 1 Solar Panel 2 Solar Panel 3 Solar Panel 4 Solar Panel 5 Solar Panel 6 Solar Panel 7 Solar Panel 8 Solar Panel 9 Solar Panel 10 ACE FOU FOU Type A, excl. repeater FOU Type B, excl. repeater FOU Type C, excl. repeater FOU Type D, excl. repeater FOU Type A, WDM, excl. repeater FOU Type B, WDM, excl. repeater FOU Type C, WDM, excl. repeater FOU Type D, WDM, excl. repeater ACE BMU BMU. 1 LINE Star/Serial 1 FOT/FON BMU. 2 LINE Star/Serial 2 FOT/FON BMU. 2 LINE Star 1 FOT/FON BMU. 3 LINE Star 1 FOT/FON BMU. 4 LINE Star 1 FOT/FON BMU. 3 LINE Star 2 FOT/FON
UA111 01/1-St24L BMU. 4 LINE Star 2 FOT/FON UA111 01/1-St25L BMU. 5 LINE Star 2 FOT/FON UA111 01/1-St26L BMU. 6 LINE Star 2 FOT/FON UA111 01/1-St27L BMU. 7 LINE Star 2 FOT/FON UA111 01/1-St28L BMU. 8 LINE Star 2 FOT/FON UA111 01/1-WSS11L BMU. 1 LINE ,WDM Star/Serial 1 FOT/FON UA111 01/1-WSS22L BMU. 2 LINE, WDM Star/Serial 2 FOT/FON UA111 01/1-WSt12LBMU. 2 LINE, WDM Star 1 FOT/FON UA111 01/1-WSt13LBMU. 3 LINE, WDM Star 1 FOT/FON UA111 01/1-WSt14LBMU. 4 LINE, WDM Star 1 FOT/FON UA111 01/1-WSt23LBMU. 3 LINE, WDM Star 2 FOT/FON UA111 01/1-WSt24LBMU. 4 LINE, WDM Star 2 FOT/FON UA111 01/1-WSt25LBMU. 5 LINE, WDM Star 2 FOT/FON UA111 01/1-WSt26LBMU. 6 LINE, WDM Star 2 FOT/FON UA111 01/1-WSt27LBMU. 7 LINE, WDM Star 2 FOT/FON UA111 01/1-WSt28LBMU. 8 LINE, WDM Star 2 FOT/FON UA111 02/1 ACE BMU Rack UA113 00/1 ACE RMU UA113 01/1-SS1L RMU. 1 LINE Star/Serial UA113 01/1-St2L RMU. 2 LINE Star UA113 01/1-St3L RMU. 3 LINE Star UA113 01/1-St4L RMU. 4 LINE Star UA113 01/1-WSS1LRMU. 1 LINE Star/Serial, WDM UA113 01/1-WSt2L RMU. 2 LINE Star, WDM UA113 01/1-WSt3L RMU. 3 LINE Star, WDM UA113 01/1-WSt4L RMU. 4 LINE Star, WDM UA115 00/1 Site Distribution Unit UA115 02/1 ACE SDU Rack VE007 96/1 External R2R Cable for Compact VE008 17/1 BBU Compact Alarm Cable
Maritime Repeaters
Product
ALM1200_00202 ALM2200_00102 ALM2200_90102 AM1200_05302 AM2200_00102 AM2200_90102
Description
Compact 900 MHz Compact 1800 MHz, Low Band Compact 1800 MHz, High Band Standard 900 MHz Standard 1800 MHz, Low Band Standard 1800 MHz, High Band
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-16
ALM1200/002-201 B
Fil/file
ALM1200-002_B.doc
Ferry repeater with adjustable bandwidth 900 MHz version, 25 MHz BW Product Number: ALM1200/002
1. Electrical specification (typical values)
The repeater complies with following standards: Radio Transmission and Reception ETS 300 609-4 EMC for GSM and DCS repeaters ETS301 489-1 EMC for Maritime applications EN60945 Emission for Maritime applications BS1597 Immunity for Maritime application BS7027
Frequency tuning band Up link Frequency tuning band Down link Filter bandwidth standard, adjustable Filter setting resolution Duplex spacing Gain adjustment range Gain (max variation 25 to +55 C) Gain step resolution Gain trail dynamic range DL/UL gain trail tracking accuracy Filter selectivity @ 400 kHz offset Filter selectivity @ 600 kHz offset Filter selectivity @ 1 MHz offset Output power, PEP Output power, 2 carrier Pass band ripple Max absolute group delay Noise figure at 70 dB gain, 25 C Maximum input power Receiver input port return loss Power supply voltage Power consumption
890 915 935 960 0.5 25 25 45 55-70 5 1 25 2 > 20 > 30 > 35 + 25 + 19 5 6 8 +13 14 85 - 265 55
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-16
ALM1200/002-201 B
Fil/file
ALM1200-002_B.doc
2. Environmental specification
Temperature range Casing class -13 to + 131 F -25 to + 55 C NEMA4/IP65
15.2 x 15.2 x 4.3 385 x 385 x 110 See Compact Low < 22 < 10 N-type female Allgon Safety bolts
Inches mm lbs kg
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-18
ALM2200/001-201 B
Fil/file
ALM2200-001_B.doc
Ferry repeater with adjustable bandwidth 1800 MHz version, Low band Product Number: ALM2200/001
1. Electrical specification (typical values)
The repeater complies with following standards: Radio Transmission and Reception ETS 300 609-4 EMC for GSM and DCS repeaters ETS301 489-1 EMC for Maritime applications EN60945 Emission for Maritime applications BS1597 Immunity for Maritime application BS7027
Frequency tuning band Up link Frequency tuning band Down link Filter bandwidth, software adjustable Filter setting resolution Duplex spacing Gain adjustment range Gain (max variation 25 to +55C) Gain step resolution Gain trail dynamic range DL/UL gain trail tracking accuracy Filter selectivity @ 400 kHz offset Filter selectivity @ 600 kHz offset Filter selectivity @ 1 MHz offset Output power, PEP Output power, 2 carrier Pass band ripple Max absolute group delay Noise figure at 70 dB gain, 25 C Maximum input power Receiver input port return loss Power supply voltage Power consumption
1710 1765 1805 1860 0.5 15 25 95 55-70 5 1 25 2 > 20 > 30 > 35 + 26 + 20 5 6 8 +13 14 85 - 265 55
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-18
ALM2200/001-201 B
Fil/file
ALM2200-001_B.doc
15.2 x 15.2 x 4.3 385 x 385 x 110 See Compact Low < 22 < 10 N-type female Allgon Safety bolts
Inches mm lbs kg
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-18
ALM2200/901-201 B
Fil/file
ALM2200-901_B.doc
Ferry repeater with adjustable bandwidth 1800 MHz version, High band Product Number: ALM2200/901
1. Electrical specification (typical values)
The repeater complies with following standards: Radio Transmission and Reception ETS 300 609-4 EMC for GSM and DCS repeaters ETS301 489-1 EMC for Maritime applications EN60945 Emission for Maritime applications BS1597 Immunity for Maritime application BS7027
Frequency tuning band Up link Frequency tuning band Down link Filter bandwidth, software adjustable Filter setting resolution Duplex spacing Gain adjustment range Gain (max variation 25 to +55C) Gain step resolution Gain trail dynamic range DL/UL gain trail tracking accuracy Filter selectivity @ 400 kHz offset Filter selectivity @ 600 kHz offset Filter selectivity @ 1 MHz offset Output power, PEP Output power, 2 carrier Pass band ripple Max absolute group delay Noise figure at 70 dB gain, 25 C Maximum input power Receiver input port return loss Power supply voltage Power consumption
1730 1785 1825 1880 0.5 15 25 95 55-70 5 1 25 2 > 20 > 30 > 35 + 26 + 20 5 6 8 +13 14 85 - 265 55
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-18
ALM2200/901-201 B
Fil/file
ALM2200-901_B.doc
15.2 x 15.2 x 4.3 385 x 385 x 110 See Compact Low < 22 < 10 N-type female Allgon Safety bolts
Inches mm lbs kg
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-16
AM1200/053-201 D
Fil/file
AM1200_053_D.doc
Maritime repeater with adjustable bandwidth 900 MHz version Product Number: AM1200/053
1. Electrical specification (typical values)
The repeater complies with following standards: Radio Transmission and Reception ETS 300 609-4 EMC for GSM and DCS repeaters ETS301 489-1 EMC for Maritime applications EN60945 Emission for Maritime applications BS1597 Immunity for Maritime application BS7027 890 915 935 960 0.5 25 25 45 45-85 6 1 30 2 25 BW 3dB + 1.2 BW 3dB + 2.2 + 29 + 23 5 6 6 +13 14 230 160 MHz MHz MHz kHz MHz dB dB dB dB dB MHz MHz MHz dBm dBm dB s dB dBm dB VAC W
Frequency tuning band Up link Frequency tuning band Down link Filter bandwidth, software adjustable Filter setting resolution Duplex spacing Gain adjustment range Gain (max variation 25 to +55C) Gain step resolution Gain trail dynamic range DL/UL gain trail tracking accuracy Selectivity BW 3 dB Selectivity BW 35 dB Selectivity BW 45 dB Output power, PEP Output power, 2 carrier Pass band ripple Max absolute group delay Noise figure at 70 dB gain, 25 C Maximum input power Receiver input port return loss Power supply voltage, default Power consumption 1
Repeater equipped with AC power supply must have power line filter EA101 84/2 and DC power supply must have power line filter EA101 84/3
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-16
AM1200/053-201 D
Fil/file
AM1200_053_D.doc
2. Environmental specification Temperature range Casing class 3. Mechanical specification Dimensions. (W x H x D) Mechanical outline Weight RF connectors
C F
17.4 x 20.9 x 6.9 440 x 530 x 175 See Standard Low < 46 < 21 N-type female
Inches mm lbs Kg
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-16
AM2200/001-201
Fil/file
AM2200-001_C.doc
Maritime repeater with adjustable bandwidth 1800 MHz version, Low band Product Number: AM2200/001
1. Electrical specification (typical values)
The repeater complies with following standards: Radio Transmission and Reception ETS 300 609-4 EMC for GSM and DCS repeaters ETS301 489-1 EMC for Maritime applications EN60945 Emission for Maritime applications BS1597 Immunity for Maritime application BS7027
Frequency tuning band Up link Frequency tuning band Down link Filter bandwidth, software adjustable Filter setting resolution Duplex spacing Gain adjustment range Gain (max variation 25 to +55C) Gain step resolution Gain trail dynamic range DL/UL gain trail tracking accuracy Filter selectivity @ 400 kHz offset Filter selectivity @ 600 kHz offset Filter selectivity @ 1 MHz offset Output power, PEP Output power, 2 carrier Pass band ripple Max absolute group delay Noise figure at 70 dB gain, 25 C Maximum input power Receiver input port return loss Power supply voltage 1 Power consumption
1710 1765 1805 1860 0.5 16,9 25 95 45-85 6 1 30 2 > 20 > 30 > 35 + 32 + 26 5 6 6 +13 14 85 - 265 160
Repeater equipped with AC power supply must have power line filter EA101 84/2 and DC power supply must have power line filter EA101 84/3
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-16
AM2200/001-201
Fil/file
AM2200-001_C.doc
C F
17.4 x 20.9 x 6.9 440 x 530 x 175 See Standard Low < 46 < 21 N-type female
Inches mm lbs kg
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-16
AM2200/901-201
Fil/file
AM2200-901_C.doc
Maritime repeater with adjustable bandwidth 1800 MHz version, Upper band Product Number: AM2200/901
1. Electrical specification (typical values)
The repeater complies with following standards: Radio Transmission and Reception ETS 300 609-4 EMC for GSM and DCS repeaters ETS301 489-1 EMC for Maritime applications EN60945 Emission for Maritime applications BS1597 Immunity for Maritime application BS7027
Frequency tuning band Up link Frequency tuning band Down link Filter bandwidth, software adjustable Filter setting resolution Duplex spacing Gain adjustment range Gain (max variation 25 to +55C) Gain step resolution Gain trail dynamic range DL/UL gain trail tracking accuracy Filter selectivity @ 400 kHz offset Filter selectivity @ 600 kHz offset Filter selectivity @ 1 MHz offset Output power, PEP Output power, 2 carrier Pass band ripple Max absolute group delay Noise figure at 70 dB gain, 25 C Maximum input power Receiver input port return loss Power supply voltage Power consumption 1
1730 1785 1825 1880 0.5 16,9 25 95 45-85 6 1 30 2 > 20 > 30 > 35 + 32 + 26 5 6 6 +13 14 85 - 265 160
Repeater equipped with AC power supply must have power line filter EA101 84/2 and DC power supply must have power line filter EA101 84/3
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-16
AM2200/901-201
Fil/file
AM2200-901_C.doc
C F
17.4 x 20.9 x 6.9 440 x 530 x 175 See Standard Low < 46 < 21 N-type female
Inches mm lbs kg
In-train Repeaters
Product
ALT1200_00202 ALT2200_00102 ALT2200_90102
Description
Compact 900 MHz Compact 1800 MHz, Low Band Compact 1800 MHz, High Band
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-16
ALT1200/002-201
Fil/file
PRODUCT SPECIFICATION
ALT1200-002_B.doc
In-Train repeater with adjustable bandwidth 900 MHz version, 25 MHz BW Product Number: ALT1200/002
1. Electrical specification (typical values)
The repeater complies with following standards: Radio Transmission and Reception ETS 300 609-4 EMC for GSM and DCS repeaters ETS301 489-1 EMC for railway applications-apparatus EN50121-3-2 890 915 935 960 0.5 25 25 45 55-70 5 1 25 2 > 20 > 30 > 35 + 25 + 19 5 6 8 +13 14 85 - 265 55 MHz MHz MHz kHz MHz dB dB dB dB dB dB dB dB dBm dBm dB s dB dBm dB VAC W
Frequency tuning band Up link Frequency tuning band Down link Filter bandwidth standard, adjustable Filter setting resolution Duplex spacing Gain adjustment range Gain (max variation 25 to +55 C) Gain step resolution Gain trail dynamic range DL/UL gain trail tracking accuracy Filter selectivity @ 400 kHz offset Filter selectivity @ 600 kHz offset Filter selectivity @ 1 MHz offset Output power, PEP Output power, 2 carrier Pass band ripple Max absolute group delay Noise figure at 70 dB gain, 25 C Maximum input power Receiver input port return loss Power supply voltage Power consumption
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-16
ALT1200/002-201
Fil/file
PRODUCT SPECIFICATION
ALT1200-002_B.doc
2. Environmental specification
Temperature range Casing class -13 to + 131 F -25 to + 55 C NEMA4/IP65
15.2 x 15.2 x 4.3 385 x 385 x 110 See Compact Low < 22 < 10 N-type female Allgon Safety bolts
Inches mm lbs kg
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-16
ALT2200/001-201
Fil/file
ALT2200-001_B.doc
In-Train repeater with adjustable bandwidth 1800 MHz version, Low band Product Number: ALT2200/001
1. Electrical specification (typical values)
The repeater complies with following standards: Radio Transmission and Reception ETS 300 609-4 EMC for GSM and DCS repeaters ETS301 489-1 EMC for railway applications-apparatus EN50121-3-2
Frequency tuning band Up link Frequency tuning band Down link Filter bandwidth, software adjustable Filter setting resolution Duplex spacing Gain adjustment range Gain (max variation 25 to +55C) Gain step resolution Gain trail dynamic range DL/UL gain trail tracking accuracy Filter selectivity @ 400 kHz offset Filter selectivity @ 600 kHz offset Filter selectivity @ 1 MHz offset Output power, PEP Output power, 2 carrier Pass band ripple Max absolute group delay Noise figure at 70 dB gain, 25 C Maximum input power Receiver input port return loss Power supply voltage Power consumption
1710 1765 1805 1860 0.5 15 25 95 55-70 5 1 25 2 > 20 > 30 > 35 + 26 + 20 5 6 8 +13 14 85 - 265 55
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-16
ALT2200/001-201
Fil/file
ALT2200-001_B.doc
15.2 x 15.2 x 4.3 385 x 385 x 110 See Compact Low < 22 < 10 N-type female Allgon Safety bolts
Inches mm lbs kg
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-16
ALT2200/901-201
Fil/file
ALT2200-901_B.doc
In-Train repeater with adjustable bandwidth 1800 MHz version, Upper band Product Number: ALT2200/901
1. Electrical specification (typical values)
The repeater complies with following standards: Radio Transmission and Reception ETS 300 609-4 EMC for GSM and DCS repeaters ETS301 489-1 EMC for railway applications-apparatus EN50121-3-2
Frequency tuning band Up link Frequency tuning band Down link Filter bandwidth, software adjustable Filter setting resolution Duplex spacing Gain adjustment range Gain (max variation 25 to +55C) Gain step resolution Gain trail dynamic range DL/UL gain trail tracking accuracy Filter selectivity @ 400 kHz offset Filter selectivity @ 600 kHz offset Filter selectivity @ 1 MHz offset Output power, PEP Output power, 2 carrier Pass band ripple Max absolute group delay Noise figure at 70 dB gain, 25 C Maximum input power Receiver input port return loss Power supply voltage Power consumption
1730 1785 1825 1880 0.5 15 25 95 55-70 5 1 25 2 > 20 > 30 > 35 + 26 + 20 5 6 8 +13 14 85 - 265 55
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-16
ALT2200/901-201
Fil/file
ALT2200-901_B.doc
15.2 x 15.2 x 4.3 385 x 385 x 110 See Compact Low < 22 < 10 N-type female Allgon Safety bolts
Inches mm lbs kg
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-18
ALR4200/011-201
Fil/file
PRODUCT SPECIFICATION
ALR4200-011_G.doc
COMPACT repeater with adjustable bandwidth 800 MHz version, CDMA, 15 MHz Product Number: ALR4200/011
1. Electrical specification (typical values)
The repeater complies with the requirements of FCC Frequency tuning band Up link Frequency tuning band Down link Filter bandwidth, software adjustable Filter setting resolution Duplex spacing Gain adjustment range Gain (max variation 25 to +55 C) Gain step resolution Filter selectivity @ 400 kHz offset Filter selectivity @ 600 kHz offset Filter selectivity @ 1 MHz offset Output power DL, RMS Output power UL, RMS Output power DL, 2 carrier Output power UL, 2 carrier Pass band ripple Max absolute group delay Noise figure DL, at 70 dB gain, 25 C Noise figure UL, at 70 dB gain, 25 C Maximum input power Receiver input port return loss Power supply voltage Power consumption 824 849 869 894 0.5 15 25 45 55-70 5 1 > 20 > 30 > 35 + 27 + 24 + 23 + 20 5 6 6 5 +13 14 85 - 265 55 MHz MHz MHz kHz MHz dB dB dB dB dB dB dBm dBm dBm dBm dB s dB dB dBm dB VAC W
15.2 x 15.2 x 4.3 385 x 385 x 110 See Compact Low < 22 < 10 N-type female Allgon Safety bolts
Inches mm lbs kg
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-18
ALR4200/012-201
Fil/file
PRODUCT SPECIFICATION
ALR4200-012_F.doc
COMPACT repeater with adjustable bandwidth 800 MHz version, CDMA 25 MHz Product Number: ALR4200/012
1. Electrical specification (typical values)
The repeater complies with the requirements of FCC Frequency tuning band Up link Frequency tuning band Down link Filter bandwidth, software adjustable Filter setting resolution Duplex spacing Gain adjustment range Gain (max variation 25 to +55 C) Gain step resolution Filter selectivity @ 400 kHz offset Filter selectivity @ 600 kHz offset Filter selectivity @ 1 MHz offset Output power DL, RMS Output power UL, RMS Output power DL, 2 carrier Output power UL, 2 carrier Pass band ripple Max absolute group delay Noise figure DL, at 70 dB gain, 25 C Noise figure UL, at 70 dB gain, 25 C Maximum input power Receiver input port return loss Power supply voltage Power consumption 2. Environmental specification Temperature range Casing class 3. Mechanical specification Dimensions. (W x H x D) Mechanical outline Weight RF-connectors Lock type 824 849 869 894 0.5 25 25 45 55-70 5 1 > 20 > 30 > 35 + 27 + 24 + 23 + 20 5 6 6 4 +13 14 85 265 55 MHz MHz MHz kHz MHz dB dB dB dB dB dB dBm dBm dBm dBm dB s dB dB dBm dB VAC W
15.2 x 15.2 x 4.3 385 x 385 x 110 See Compact Low < 22 < 10 N-type female Allgon Safety bolts
Inches mm lbs kg
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-18
ALR3200/011-201
Fil/file
ALR3200-011_C.doc
COMPACT repeater with adjustable bandwidth 1900 MHz version, CDMA Low band Product Number: ALR3200/011
1. Electrical specification (typical values)
The repeater complies with the requirements of FCC Frequency tuning band Up link Frequency tuning band Down link Filter bandwidth, software adjustable Filter setting resolution Duplex spacing Gain adjustment range Gain (max variation 25 to +55 C) Gain step resolution Filter selectivity @ 400 kHz offset Filter selectivity @ 600 kHz offset Filter selectivity @ 1 MHz offset Output power, PEP Output power, RMS Output power, 2 carrier Pass band ripple Max absolute group delay Noise figure at 70 dB gain, 25 C Maximum input power Receiver input port return loss Power supply voltage Power consumption 2. Environmental specification Temperature range Casing class 3. Mechanical specification Dimensions. (W x H x D) Mechanical outline Weight RF-connectors Lock type 1850 1890 1930 1970 0.5 15 25 80 55-70 5 1 > 20 > 30 > 35 + 27 +24 + 23 5 6 8 +13 14 85 - 265 55 MHz MHz MHz kHz MHz dB dB dB dB dB dB dBm dBm dBm dB s dB dBm dB VAC W
15.2 x 15.2 x 4.3 385 x 385 x 110 See Compact Low < 22 < 10 N-type female Allgon Safety bolts
Inches mm lbs kg
ALLGON SYSTEM AB
Utfrdare/Issued by Dattum/Date Godknd/Approved Dok nr/Doc no Rev Sida/Page
Kjell Knuutinen
Dok namn/Doc name
2003-06-18
ALR3200/911-201
Fil/file
ALR3200-911_C.doc
COMPACT repeater with adjustable bandwidth 1900 MHz version, CDMA High band Product Number: ALR3200/911
1. Electrical specification (typical values)
The repeater complies with the requirements of FCC Frequency tuning band Up link Frequency tuning band Down link Filter bandwidth, software adjustable Filter setting resolution Duplex spacing Gain adjustment range Gain (max variation 25 to +55 C) Gain step resolution Filter selectivity @ 400 kHz offset Filter selectivity @ 600 kHz offset Filter selectivity @ 1 MHz offset Output power, PEP Output power, RMS Output power, 2 carrier Pass band ripple Max absolute group delay Noise figure at 70 dB gain, 25 C Maximum input power Receiver input port return loss Power supply voltage Power consumption 2. Environmental specification Temperature range Casing class 3. Mechanical specification Dimensions. (W x H x D) Mechanical outline Weight RF-connectors Lock type 1870 1910 1950 1990 0.5 15 25 80 55-70 5 1 > 20 > 30 > 35 + 27 + 24 + 23 5 6 8 +13 14 85 - 265 55 MHz MHz MHz kHz MHz dB dB dB dB dB dB dBm dBm dBm dB s dB dBm dB VAC W
15.2 x 15.2 x 4.3 385 x 385 x 110 See Compact Low < 22 < 10 N-type female Allgon Safety bolts
Inches mm lbs kg