Grinding machine & wheels

Surface Grinder

RPM = 6600

Mini-Surface Grinder

RPM = 9000

Grinding machine & wheels

Mini-straight Grinder & Its compatible wheels

RPM = 18000

Grinding machine & wheels

Pedestal Grinder

RPM = 2300

Mounting of Depressed Centre wheel on Surface Grinder

Grinder

Guard Back flange

Grinding wheel
Adopter Nut

Unsafe Method Mounting of Wheel on Surface Grinder

Grinder

Grinding wheel

Adopter Nut

The back flange Not used

Unsafe Method Mounting of Wheel on Surface Grinder

Grinder

Back flange

Grinding wheel

Adaptor nut not used

Unsafe Method Mounting of Wheel on Surface Grinder

Grinder

Back flange Grinding wheel Adopter Nut

Wheel used as support for paper wheel

Unsafe Method Mounting of Wheel on Surface Grinder

Grinder

Grinding wheel
Adopter Nut

Old used wheel or Metal plates used in place of back flange

Unsafe Method Mounting of Wheel on Surface Grinder

Grinder

Back flange

Grinding wheel
Adopter Nut

Cut-off wheel is used instead of Depressed centre wheel

Unsafe Method Mounting of Wheel on Surface Grinder

M/c RPM 6600

Wheel RPM 6500

Grinding wheel RPM is less than RPM of the machine

Mounting of Depressed Centre wheel on Surface Grinder

Grinder

Back flange

Grinding wheel
Adopter Nut

Grinding machine & wheels

Straight Grinder

RPM = 5630

Unsafe method of mounting of wheel on Straight Grinder

Guards Grinder Nut

D d=D/3

Grinding wheel flange

Mounting of Grinding wheel on Straight Grinder

Grinder

Grinding wheel

Using flange on one side only

Mounting of Grinding wheel on Straight Grinder

Grinder Grinder

d<D/3

Providing smaller size of flanges

Providing different size of flanges on both sides

Mounting of Grinding wheel on Straight Grinder

Grinder

Nut not mounted fully on the spindle of the grinder Guard missing

Mounting of Grinding wheel on Straight Grinder

Grinder

Flanges are put in reverse way

Mounting of Grinding wheel on Straight Grinder

Nut Grinder

D d=D/3

Grinding wheel flange