Professional Documents
Culture Documents
FEATURES
· Butterfly form factor supports PCI-Express™ option
cards
PICMG® 1.3
System Host Board
x8 PCIe · Supports 2U chassis designs
USB Connector x1 PCIe Link* Connector
(P11) (B1) (PCIe1)
· One SHB Express™ (PICMG® 1.3) System Host Board
Ethernet Connector
(P13) x1 PCIe Link*
x8 PCIe
Connector
Slot
BPX6736 Backplane
System Host Board Slot (B0) (PCIe3)
ATX or EPS Power
Connector (P1) (Edge connectors A, B and C) · One x16 PCI Express Slot (mechanical)
x8 PCIe Link x8 PCIe
+12V Power Connector (A2) Connector
(PCIe2)
(P2) · Three x8 PCI Express Slots (mechanical)
x16 PCIe
USB x8 PCIe Link Connector
To Speaker/Microphone Audio USB (A0) (PCIe4)
· Audio port for speaker and microphone interface
Interface Connections Port Audio
(P3) Controller
· Two USB 2.0 backplane I/O connections**
*Assumes Trenton MCX-series
System Host Board (SHB)
· One 10/100/1000Base-T backplane Ethernet port**
Specifications
3.150
2.479*
2.422 0.267
1.949 0.184*(0.135)
.577*
SIDE A 1.000 SIDE B
0.305
0.483*
x8 PCIe Link (A0) x8 PCIe Link (A0)
1.488*
PCIe1 PCIe2 PCIe3 PCIe4 PCIe4 PCIe3 PCIe2 PCIe1
Side B PCIe4
6.300 PCIe3
PCIe2
9.627 PCIe1 Side A
x1 PCIe 12.095 x1 PCIe SHB Slot
Link (B1) Link (B1)
x8 PCIe Link 1
12.900 x8 PCIe Link BPX6736 Backplane
(A2)
(A2) I/O Plate View
x1 PCIe Link (B0) P10 x1 PCIe Link (B0)
JU4
P1 1 0.983
P7
POWER INDICATORS
PWRBT#
Surface-mount LEDs provide a convenient visual check for +5V, -5V,
Power On
+5V AUX,+12V, -12V and +3.3V power connection and status. Switch
CAUTION: Never install or remove the SHB or any option card from Normally Open
Momentary
the BPX6736 backplane if the +5V AUX LED is GREEN. If the system
appears to be off and the+5V AUX LED is GREEN, you need to
remove or turn off the incoming power to the system power supply. ACPI signal usage is optional and may be turned off using the
SHB’s BIOS and/or signal jumpers. Specific power connections
PRINTED CIRCUIT LAYERS and BIOS parameters will differ depending on unique system
The backplane is a six-layer, .062” thick board with three separate design requirements. Refer to the Appendix B (Power
signal layers: +5V/+12V, +3.3V and ground. Multi-layer backplane Connection) and Advanced Setup BIOS sections found in the
construction provides excellent noise immunity. Technical Reference Manual for your specific Trenton system
host board for more information.
Trenton Technology Inc. 2350 Centennial Drive, Gainesville, Georgia 30504 Sales: (800) 875-6031 Phone: (770) 287-3100 Fax: (770) 287-3150
E-mail: Sales@TrentonTechnology.com Web: www.TrentonTechnology.com