You are on page 1of 2

WTM7026 PRODUCT DATA SHEET

WTM7026 MOTHERBOARD WITH SIX-CORE PROCESSORS

Trenton's WTM7026 is designed and built in the U. S. to deliver performance, data security and system longevity in embedded applications
worldwide. The motherboard features extended-life, six-core or quad-core processors based on the Westmere-EP core. Here are some highlights
of the Trenton WTM7026 embedded motherboard:

ü Quad and Six-Core, Intel® Xeon® Series 5600 Processors ü Intel® 5520 Chipset with the Intel® ICH10R ü Six, dual-channel DDR3-1333 memory interfaces
ü Twelve, DDR3 DIMM slots (144GB max.) ü SSI-EEB Form Factor (12.0”/30.5cm x 13.0”/33.0cm) ü SSI-EEB Enterprise Electronics Bay Specification 2008
ü Trusted Computing support via TPM 1.2 ü Three x8 PCI Express® Gen 2 card slots (electrical) ü Two x4 PCI Express Gen 2 card slots (electrical)
ü One x4 PCI Express Gen 1.1 card slot (electrical) ü One 32-bit/33MHz PCI card slot ü Four 10/100/1000Base-T Ethernet ports
ü Ten USB 2.0 interfaces ü Six SATA II 300 ports with locking connectors ü On-board SATA RAID support
ü Graphic Processing Unit (GPU) ü PS/2 Mouse/Keyboard port ü Video Port
ü Audio Port ü Serial communication interfaces ü Intel® QuickPath Interconnect
ü Intel® TurboBoost ü Intel® Hyper-Threading Technology ü Intel® VT, Intel® VT-d and Intel® TXT Support

PROCESSORS: CHIPSET: OPTION CARD SLOTS:


Quad and Six-Core Intel Xeon Series 5600 Processors,
® ®
®
Combining the Intel 5520 Input Output Hub (IOH) with the A total of seven option card slots are supported on the Trenton
Embedded core speeds of 2.0GHz - 2.4GHz* ®
Intel ICH10R delivers chipset performance and functionality WTM7026 motherboard.
Package: LGA 1366 socket *Higher speeds are supported well suited for challenging embedded computing applications. Three x16 PCI Express (PCIe )mechanical slots driven with x8
Processor to IOH speeds of 4.8GT/s, 5.86GT/s and 6.4GT/s are PCIe Gen 2 electrical links
The Intel® 5520 chipset and each Intel® Xeon® E5600 series Two x8 PCIe mechanical slots driven with x4 PCIe Gen 2 links
supported and IOH to ICH10R communications are supported
processor on the WTM7026 supports the Intel® QuickPath One x8 PCIe mechanical slot driven with a x4 PCIe Gen 1.1
via the Controller Link (Clink) and the Enterprise Southbridge
Interconnect (QPI). The interface speed of an Intel® QPI is ® link
Interface (ESI). ESI features a x4 PCI Express link with a
determined by the specific processor and is measured in Giga One 32-bit/33MHz PCI slot
transfer rate of 2.5Gbps between the IOH and the ICH10R.
Transfers per second (GT/s). GT/s refers the how quickly data
Many advanced I/O capabilities are built into this chipset
packets are transferred from a processor to the chipset or from STANDARDS:
combination including SATA RAID array support and direct
processor-to-processor. The Intel® QPI enables the sharing of PCI Express® Base Specification 1.1 and 2.0
option card slot interface capabilities that include PCI Express
computing resources between processors and faster processor to PCI Local Bus Specification 2.3
Gen 2, PCI Express Gen 1.1 and 32-bit/33MHz PCI.
chipset communications. Other processor features include: IEEE P996, Personal Computer Bus Standard
• Quad-Core, 12MB Shared Last-Level Cache (LLC) DDR3-1333 MEMORY: SSI-EEB 2008 - Rev 1.0 (Extended ATX form factor std.)
• Intel® Hyper-Threading enables 8 threads per processor
Each processor on the WTM7026 features three, dual channel
• Intel® VT, Intel® VT-d and Intel® TXT support with
DDR3-1333 system memory interface connections directly to six
appropriate BIOS and application-level software DIMM sockets for a total of twelve DDR3 DIMMs supported on the
• Integrated Memory Controller (IMC) built into motherboard. PC3-10600, PC3-8500 or PC3-6400 DIMMs that
the processor for direct system memory connections are ECC registered, 72-bit, 240-pin gold-plated may be used.
• Three, dual-channel DDR3 1333MHz memory interfaces
144GB is the maximum memory capacity supported; however,
per processor memory market realities point to a practical maximum of 96GB.
Dependable, always.

TRENTON Technology Inc. 2350 Centennial Drive, Gainesville, Georgia 30504 Sales: (800) 875-6031 Phone: (770) 287-3100 Fax: (770) 287-3150
E-mail: Sales@TrentonTechnology.com Web: www.TrentonTechnology.com
MCX
WTM7026 PRODUCT DATA SHEET
DIMM Module Sockets DIMM Module Sockets
Channel 02 Channel 12
Socket BK02 A & B Socket Bk12 A & B
DDR3-1333/1066/800*
Intel® Intel® DDR3-1333/1066/800*
Xeon® Xeon®
Intel® QPI
DIMM Module Sockets
Channel 01 Processor Processor Channel 11
DIMM Module Sockets
Socket BK01 A & B Socket Bk11 A & B
DDR3-1333/1066/800* Series 5600 Series 5600 DDR3-1333/1066/800*
CPU 1 CPU 2
DIMM Module Sockets Intel® QPI DIMM Module Sockets
Channel 00 Channel 10
Socket BK00 A & B Socket LGA1366 4.8GT/s, Socket LGA1366 Socket Bk10 A & B
DDR3-1333/1066/800* DDR3-1333/1066/800*
5.86 GT/s
or **Actual Quick Path Interface (QPI) speed is a function of which
5500-series processor options are installed on the board.
6.4GT/s**

IOH
PCIe Slot 7 x4 PCIe Gen2 Ethernet
PCIe[P3] x4 PCI Express LAN 1
PCIe[2:1] Controller
x8 PCIe Gen2 10/100/1000
PCIe Slot 6 PCIe[6:5] Intel® 5520 Intel Base-T
82575
x4 PCIe Gen2 PCIe[4] (Tylersburg 36D)
LAN 2
PCIe Slot 5
x8 PCIe Gen2 PCIe[8:7]
Intel
Ethernet
PCIe Slot 4 LAN 3
PCIe[10:9] AC5520 Controller 10/100/1000
PCIe Slot 3 x4 PCIe Gen1.1 Intel Base-T )
82575 LAN 4
x8 PCIe Gen2
PCIe Slot 2
ESI CLINK SERIAL Super
Rear Panel
PCI Slot 1 PCI 32/33 SERIAL I/O
I/O Ports
x1 PCI Express (PCIe)
PCIe[1:4] PCIe[6]
PS/2 Mouse
PCI32
TPM HDR
*The specific DDR3 memory DIMM SPI TPM PS/2 KBD
SPI
Flash
type supported is a function of which Optional IPMI
5600-series processor options are LPC Bus SMSC
LPC
installed on the board. The maximum LPC47B272 Video
memory capacity supported on the x1 PCI Express (PCIe) Video
Trenton WTM (7026) long-life PCIe[5]
motherboard is 144GB. GPU
USB 10 Audio
On-board Header ICH10R Audio CODEC
USB 11
I/O USB 7
USB 6
RAID 0, 1, 5 or 10 drive Controller USB 5
array configuration USB 4
Hub USB 3
RoHS Compatible or independent SATA SATA II 300
Intel USB 2
drive configuration Six Ports
USB 1
AF82801JIR USB 0

FOUR ETHERNET INTERFACES - 10/100/1000BASE-T: WTM7026 APPLICATION CONSIDERATIONS: ADDITIONAL PRODUCT FEATURES:
The WTM7026 features Ethernet connectivity that supports four Power Requirements: I/O Features:
Gigabit Ethernet ports on the board’s rear panel I/O plate. RJ- Typical Values - 100% Stress State with 12GB of system memory • Audio and video ports (I/O plate)
45 connectors on the I/O plate provide the mechanical interface ®
• PS/2 mouse and keyboard connector (I/O plate)
CPU Intel No. +5V +12V +3.3V • Two high-speed serial ports (on-board header)
to these Ethernet networks.
2.4GHz E5645* 4.61A 13.70A 2.15A Security & Diagnostic Features:
VIDEO INTERFACE - GRAPHIC PROCESSING UNIT (GPU): 2.4GHz E5620# 4.62A 13.39A 2.08A • TPM 1.2 Trusted Computing capability
The WTM7026’s GPU uses 8MB of integrated video memory to 2.0GHz L5638* 4.61A 11.21A 2.04A • Intel® TXT support
• Fan control, polling for health and status LED interfaces
support the motherboard’s standard VGA video display port.
Typical Values - Static Desktop (Idle) with 12GB of system memory • Optional IMPI support (on-board header)
CPU Intel® No. +5V +12V +3.3V
SERIAL ATA/300 PORTS: ORDERING INFORMATION:
2.4GHz E5645* 4.59A 7.77A 1.98A
The integrated Serial ATA (SATA) controller inside the ICH10R 2.4GHz E5620# 4.62A 7.11A 1.96A Model # CPU Speed Intel® No. Embedded CPU
provides six SATA II 300 ports with data transfer rates up to 2.0GHz L5638* 4.60A 7.60A 2.06A Model Name: WTM7026
300MB/s. Independent SATA drive operation and RAID 0, 1, 5 -12V @ <100mA 507026-610-0G 2.4GHz E5645* Yes
and 10 drive array configurations are supported. SATA Tolerance for all voltages is +/- 5% 507026-710-0G 2.4GHz E5620# Yes
technology provides lower pin counts, reduced signaling Trenton recommends an EPS-style power supply for use with the 507026-631-0G 2.0GHz L5638* Yes
voltages, simplified cabling, CRC error detection and hot-plug WTM7026. Dual +12V power connectors are provided on the (0G = Memory) * = Six-core CPU # = Quad-core CPU
device support. motherboard and must be used when using dual Intel® Xeon®
Series 5600 processors and a large number of DIMMs. AGENCY APPROVALS:
UNIVERSAL SERIAL BUS INTERFACES (USB 2.0):
Designed for UL60950, CAN/CSA C22.2 No. 60950-00,
There are a total of ten available USB 2.0 interfaces on the Temperature/Environment:0 EN55022:1998 Class B, EN61000-4-2:1995, EN61000-4-3:1997,
motherboard. USB ports 0 though 7 are located on the I/O Operating Temperature: 0 to 500 C. EN61000-4-4:1995, EN61000-4-5:1995, EN61000-4-6:1996,
plate and on-board headers contain ports 10 and 11. Air Flow Requirement: 350LFM continuous airflow EN61000-4-11:1994
Storage Temperature: - 400 to 700 C. The stated bus speed, memory and communication interface speeds are component
BIOS (FLASH): Humidity: 5% to 90% non-condensing maximums; actual system performance may vary.
Intel, Intel QPI, Intel Hyper-Threading, Intel VT, Intel VT-d, Intel TXT and Intel Xeon are
The WTM7026 uses AMIBIOS8® located in the motherboard’s trademarks or registered trademarks of Intel Corporation. All other product names are
Mechanical:
SPI flash devices. AMIBIOS8 contains features such as: trademarks of their respective owners.
The Extended ATX form factor of the WTM7026 complies with
Support for flash devices for BIOS upgrading Copyright ©2010 by TRENTON Technology Inc. All rights reserved
the SSI-EEB 2008 - Rev 1.0 industry standard for overall board
Integrated support for USB mass storage devices such as dimensions [12.0” (30.5cm) x 13.0” (33.1cm)] and mounting
USB, DVD-RW, CD-ROM, CD-RW, etc. hole placements. The standard height cooling solution is
Boot from network, USB mass storage devices, IDE or ATAPI designed for 2U and greater chassis heights. Contact Trenton if
Serial port console redirection to support headless operation your system design requires a lower profile cooling solution.
Dependable, always.

TRENTON Technology Inc. 2350 Centennial Drive, Gainesville, Georgia 30504 Sales: (800) 875-6031 Phone: (770) 287-3100 Fax: (770) 287-3150
E-mail: Sales@TrentonTechnology.com Web: www.TrentonTechnology.com 8417026 06150 1.2

You might also like