Professional Documents
Culture Documents
Procat 080920222351
Procat 080920222351
It is a standard conventional rust preventive primer. It has good adhesion and drying properties. It is widely used for ferrous metal surfaces.
SPECIFICATIONS
1. 2. 3. 4. 5. 6. 7.
Type Flash Point Consistency Thinner Specific Gravity Theoretical Coverage Solid Content
: Rust Preventive primer : 380C : Ready for use : Nippolac Turpentine : 1.4 : 200-220Sq.ft/Lt ( 40 ). : 39% 320C
DRYING TIME Set to touch Dry Hard For Overcoat * H : Hour Minute 30M 1H 3H *M:
COLOURS
TEXTURE
Matt
APPLICATION DETAILS
A. Surface Preparation Eliminate oil, water, grit, grease, dirt and any foreign matter
Silicone Coatings (Pvt.) Ltd. Colombo Office:Nippolac Towers,69,Buthgamuwa Road, Matara Office: 67,Kumaradasa Mawatha, Matara, Sri Lanka. Rajagiriya, Sri Lanka. Tel : 4 933530-8 Fax: 4 9335309 e-mail:matara@nippolac.lk Tel : 4 356900-8 Fax: 4 356909 e-mail:colombo@nippolac.lk
DATA SHEET
C. Application 1. Can be applied by brush, roller and airless spray. 2. Provide adequate ventilation. Avoid any kind of fire. Clean up the tools with Nippolac mineral turpentine after use. D. Suitable Overcoats Oil and Alkyd based paints are suitable. (Nippolac Enamel Paints) Over Coats not recommended N.C Lacquer, Vinyl, Chlorinated rubber, Epoxy and Acrylic and Urethane based paints are not suitable.
Silicone Coatings (Pvt.) Ltd. Colombo Office:Nippolac Towers,69,Buthgamuwa Road, Matara Office: 67,Kumaradasa Mawatha, Matara, Sri Lanka. Rajagiriya, Sri Lanka. Tel : 4 933530-8 Fax: 4 9335309 e-mail:matara@nippolac.lk Tel : 4 356900-8 Fax: 4 356909 e-mail:colombo@nippolac.lk