Professional Documents
Culture Documents
LM 324 NNNNNN
LM 324 NNNNNN
com
LM2902,LM324/LM324A,LM224/ LM224A
Quad Operational Amplifier
Features
Internally Frequency Compensated for Unity Gain Large DC Voltage Gain: 100dB Wide Power Supply Range: LM224/LM224A, LM324/LM324A : 3V~32V (or 1.5 ~ 16V) LM2902: 3V~26V (or 1.5V ~ 13V) Input Common Mode Voltage Range Includes Ground Large Output Voltage Swing: 0V to VCC -1.5V Power Drain Suitable for Battery Operation
Description
The LM324/LM324A,LM2902,LM224/LM224A consist of four independent, high gain, internally frequency compensated operational amplifiers which were designed specifically to operate from a single power supply over a wide voltage range. operation from split power supplies is also possible so long as the difference between the two supplies is 3 volts to 32 volts. Application areas include transducer amplifier, DC gain blocks and all the conventional OP Amp circuits which now can be easily implemented in single power supply systems.
14-DIP
14-SOP
14 OUT4 1 _ + 4 _ 13 IN4 (-) 12 IN4 (+) 11 GND _ + 2 + _ 3 10 IN3 (+) 9 IN3 (-) 8 OUT3
5 6 7
Rev. 1.0.4
2002 Fairchild Semiconductor Corporation
LM2902,LM324/LM324A,LM224/LM224A
Schematic Diagram
(One Section Only)
VCC Q5 Q6 Q12
Q17 Q19
Q20 Q2 IN(-) Q1 R2 IN(+) Q11 Q21 Q7 Q8 Q9 Q10 Q13 Q15 Q14 Q16 OUTPUT Q3 Q4 C1 Q18 R1
GND
Thermal Data
Parameter Thermal Resistance Junction-Ambient Max. 14-DIP 14-SOP Symbol Rja Value 95 195 Unit C/W
LM2902,LM324/LM324A,LM224/LM224A
Electrical Characteristics
(VCC = 5.0V, VEE = GND, TA = 25C, unless otherwise specified) Parameter
Symbol Conditions
LM224
LM324
LM2902
Unit
Input Offset Voltage Input Offset Current Input Bias Current Input CommonMode Voltage Range Supply Current Large Signal Voltage Gain Output Voltage Swing Common-Mode Rejection Ratio Power Supply Rejection Ratio Channel Separation Short Circuit to GND
VIO
VCM = 0V to VCC -1.5V VO(P) = 1.4V, RS = 0 (Note1) VCM = 0V VCM = 0V Note1 RL = ,VCC = 30V (LM2902,VCC=26V) RL = ,VCC = 5V VCC = 15V,RL=2k VO(P) = 1V to 11V Note1 RL = 2k RL=10k
1.5
5.0
1.5
7.0
1.5
7.0
mV
0 50 26 27 70 65 20
0 25 26 27 65 65 20
50 250 3 1.2 20 60 -
0 25 22 23 50 50 20
nA nA V mA mA V/ mV V V mV dB dB dB mA mA
ICC
VI(+) = 1V, VI(-) = 0V ISOURCE VCC = 15V VO(P) = 2V Output Current ISINK VI(+) = 0V, VI(-) = 1V VCC = 15V VO(P) = 2V VI(+) = 0V, VI(-) = 1V VCC = 5V,VO(R) = 200mV -
10
13
10
13
10
13
mA
12 -
45 -
VCC
12 -
45 -
VCC
VCC
A V
VI(DIFF)
Note : 1. VCC=30V for LM224 and LM324 , VCC = 26V for LM2902 2. This parameter, although guaranteed, is not 100% tested in production.
LM2902,LM324/LM324A,LM224/LM224A
Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. 7.0 9.0 10.0
Input Offset Voltage Input Offset Voltage Drift Input Offset Current Input Offset Current Drift Input Bias Current Input Common-Mode Voltage Range Large Signal Voltage Gain
VIO
mV
0 25 26 27 10
7.0 10 28 5 20
0 15 26 27 10
7.0 10 28 5 20
0 15 22 23 10
7.0 10 24 5 20
VO(H) VO(L)
VI(+) = 1V, VI(-) ISOURCE = 0V VCC = 15V, VO(P) = 2V Output Current ISINK Differential Input Voltage VI(+) = 0V, VI(-) = 1V VCC = 15V, VO(P) = 2V -
10
13
mA
VI(DIFF)
VCC
VCC
VCC
Note: 1. VCC=30V for LM224 and LM324 , VCC = 26V for LM2902 2. These parameters, although guaranteed, are not 100% tested in production.
LM2902,LM324/LM324A,LM224/LM224A
Min. Typ. Max. Min. Typ. Max. 0 50 26 27 70 65 20 10 12 1.0 2 40 1.5 0.7 100 28 5 85 100 120 40 40 20 50 3.0 15 80 VCC -1.5 3 1.2 20 60 VCC 0 25 26 27 65 65 20 10 12 1.5 3.0 40 1.5 0.7 100 28 5 85 100 120 40 40 20 50 3.0 30 100 VCC -1.5 3 1.2 20 60 VCC
Input Offset Voltage Input Offset Current Input Bias Current Input Common-Mode Voltage Range Supply Current Large Signal Voltage Gain
mV nA nA V mA mA V/mV V V mV dB dB dB mA mA mA A V
Output Voltage Swing Common-Mode Rejection Ratio Power Supply Rejection Ratio Channel Separation Short Circuit to GND
VCC = 5V, RL=10k f = 1kHz to 20kHz (Note2) VCC = 15V VI(+) = 1V, VI(-) = 0V VCC =15V, VO(P) = 2V VI(+) = 0V, VI(-) = 1V VCC = 15V, VO(P) = 2V
VI(DIFF)
Note: 1. VCC=30V for LM224A, LM324A 2. This parameter, although guaranteed, is not 100% tested in production.
LM2902,LM324/LM324A,LM224/LM224A
LM324A
Typ. Max.
Unit
Input Offset Voltage Input Offset Voltage Drift Input Offset Current Input Offset Current Drift Input Bias Current Input Common-Mode Voltage Range Large Signal Voltage Gain Output Voltage Swing
0 25 26 27 10 5 -
7.0 10 40 28 5 20 8 -
0 15 26 27 10 5 -
7.0 10 40 28 5 20 8 -
VCC = 5V, RL= 10k VI(+) = 1V, VI(-) = 0V VCC = 15V, VO(P) = 2V VI(+) = 0V, VI(-) = 1V VCC = 15V, VO(P) = 2V -
Note: 1. VCC=30V for LM224A and LM324A. 2. These parameters, although guaranteed, are not 100% tested in production.
LM2902,LM324/LM324A,LM224/LM224A
Supply Voltage(v)
Temperature Tj ( C)
Frequency (Hz)
Frequency (Hz)
LM2902,LM324/LM324A,LM224/LM224A
LM2902,LM324/LM324A,LM224/LM224A
Mechanical Dimensions
Package Dimensions in millimeters
14-DIP
6.40 0.20 0.252 0.008
#7
#8
7.62 0.300
0.25 0.05
+0.10
0~15
0.010 0.002
+0.004
2.54 0.100
#1
#14
2.08 ) 0.082
LM2902,LM324/LM324A,LM224/LM224A
14-SOP
MIN 1.55 0.10 0.061 0.004 0.05 0.002
#1
#14
#8
+0.10 -0.05
0.20
5.72 0.225
10
0~
MAX0.10 MAX0.004
1.27 0.050
0.016 -0.002
0.406
+0.004
+0.10
-0.05
0.47 ) 0.019
LM2902,LM324/LM324A,LM224/LM224A
Ordering Information
Product Number LM324N LM324AN LM324M LM324AM LM2902N LM2902M LM224N LM224AN LM224M LM224AM Package 14-DIP 0 ~ +70C 14-SOP 14-DIP 14-SOP 14-DIP -25 ~ +85C 14-SOP -40 ~ +85C Operating Temperature
11
LM2902,LM324/LM324A,LM224/LM224A
DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILDS PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user.
www.fairchildsemi.com 11/19/02 0.0m 001 Stock#DSxxxxxxxx 2002 Fairchild Semiconductor Corporation
2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.
This datasheet has been download from: www.datasheetcatalog.com Datasheets for electronics components.