Professional Documents
Culture Documents
V4Plus VRF English - Features and Advantages
V4Plus VRF English - Features and Advantages
8/10HP
12/14/16HP
V4+Improvements
Whatimprovementswererealized
Efficiencyandperformance Controlandfunction Installationandmaintenance
DCtechnologyandoptimizedpipingdesign,improvetheefficiencyverymuch
Load(%)
Accordingtotherunningloadandsystempressure, itcontrolsthespeedofDCfantoachievethemin.energyconsumptionandbest performance. performance
heating
20
Incold winter
V4+Improvements
Whatimprovementswererealized
Efficiencyandperformance Controlandfunction Installationandmaintenance
decreased
MDV4+10HPnoise testingdata
Abovetesting gdatafromthenoiselab.
Load d%
Capacity%
Highestambienttemp.
Noise edB
Silencemode
Startnightsilencemode
Stopnightsilencemode
Nightnoisecontrolmode: Silentoperationmode
Cooling mode Indoor unit in cooling mode or fan only mode: indoor fan keeps running; Indoor unit in standby mode: indoor fan will not run. run
Heating mode Indoor unit in heating mode: indoor fan is controlled by anti-cold air function; Indoor unit in standby mode: indoor fan will not run. run
Heating onlymode
Cooling onlymode
Improvement
Whatimprovementswererealized
Efficiencyandperformance Controlandfunction Installationandmaintenance
Address setting
UPS
Indoorcentral
softdog
software
RS485232
outdoorcentral controller
ChangeableE.S.P.
NoNeedGas BalancePipe!
Maintenance S ft Software
Outdoor Unit
Digital ammeter Indoor CCM Communication between IN and OU Communication between OU Resistance connection
Air discharge g temp. p sensed p port at the 15 inverter compressor Water level switch Port for network module Port f for new display p y board Port for old display board Communication port of X Y E Communication port of P Q E Port for on-line writing program 16 17 18 19 20 21
The master outdoor and last indoor unit need Keep switch on
2 Display board connection selection NEW DISPLAY : connect with new display board which have digital tube showing showing. OLD DISPLAY : display board which have four light.
Key point
Old and New indoor matching issue
Old outdoor V3V4D3D4
New indoor unitcan match with old outdoor which produced after August. New indoor old indoor can match with old outdoor which produced after August. Old indoor matching no problem)
New indoor matching no problem) New indoor old indoormatching no problem) Old indoor matching no problem)
1 New indoor : new type indoor unit which designed for V4+ outdoor. 2Old indoor : current indoor units which designed for digital scroll and DC inverter system
Remark: R k 1The old indoor unit need manual address setting when V4+ match with old indoor 2When the new indoor and old indoor mixed installation in one system , the old i d indoor units it need d manual l switch it h address dd setting tti before b f power on , and d make k sure Last one indoor unit must be new type indoor unit.
Key point
V4+ outdoor with V4 outdoor issue : They y can not Mixed free f combination. V4+ system central control issue : one CCM03 just can connect one Refrigerant System when CCM03 connect from outdoor side. side