You are on page 1of 4

How to use Chart Assistant with a new license

1. Exit Navi-Sailor and wait for approximately 30 sec 2. Start Chart Assistant for advanced users

Transas Marine Ltd. Datavgen 37 SE-436 32 Askim Sweden

www.transasmarine.com TADS@transas.com

Phone Fax 24h service

+46 31 769 56 80 +46 31 69 41 84 +46 705 69 41 80

3. Choose format SENC

Transas Marine Ltd. Datavgen 37 SE-436 32 Askim Sweden

www.transasmarine.com TADS@transas.com

Phone Fax 24h service

+46 31 769 56 80 +46 31 69 41 84 +46 705 69 41 80

4. Insert the USB stick with the new license; 5. Push the License button to install a new license:

6. Insert the TADS Base disc 1. 7. Click the Update button, and choose CD as the media you wish to install from:

8. Follow the instructions which are given on the screen; 9. Repeat procedures above (6-8) with the other TADS Base discs as well except for TADS ENC BASE CD no 9 and 10.

Transas Marine Ltd. Datavgen 37 SE-436 32 Askim Sweden

www.transasmarine.com TADS@transas.com

Phone Fax 24h service

+46 31 769 56 80 +46 31 69 41 84 +46 705 69 41 80

10. Insert the latest update disc and click Update button for further selection a media from where updates will be installed.

11. Close Chart Assistant and wait for approximately 30 sec. 12. Run Navi-Sailor!

Transas Marine Ltd. Datavgen 37 SE-436 32 Askim Sweden

www.transasmarine.com TADS@transas.com

Phone Fax 24h service

+46 31 769 56 80 +46 31 69 41 84 +46 705 69 41 80

You might also like