Professional Documents
Culture Documents
To begin, I decided to insert an S from a text font editor, and chose a font which was horrific to represent our group logo Triple S
2. Secondly, I decided to change the colour of the letter, by using the colour tool located at the side of the page.
3. I then added an outline of black to the letter by using the outline tool with the design button.
4. I then adjusted the look of the letter by adding an outer glow effect making it more outstanding.
5. To make the S look more bold, I chose to make the glows line more thicker, to make the S look more eye catchy.
6. I then decided to give the letter a more bloody/horrific look by adding layer effects, with the use of the design tool by also giving the inner layer a glow as well as the outer layer whilst making it more thicker too.
7. Furthermore, I then chose a bold font to add next to the S by using the text tool, choosing the colour to be red as well as it being much smaller than the letter S.
8. Finally, I decided I would use a simple font for the word productions, keeping it black and more bigger underneath to represent our logo.
To End - This Power point involved the steps showing the making of our designed group logo TRIPLE S PRODUCTIONS