You are on page 1of 1

S.No.

Specimen

Minimum Convenient time to Measure contact angle

Minimum Convenient time to coat and film formation @ speed 3000rpm) and (regular interval of time in hours) 2 hours

Remarks

Cement DGEBA + DETA system

1 hour with Formamide and Ethylene Glycol

Contact Angle with diiodomethane is pending -

1 hour

1 hour (even hours)

Note: 1. For confirmation whether film is formed or not again we can do contact angle measurements under the coated sampled and test with standard values.

Observations: 2. On Epoxy and hydrated cement we can directly see the film circumference and formation. 3. Only for initial curing of cement it is very completed to find out the circumference of film.

You might also like