Professional Documents
Culture Documents
Mesh Generation for SpaceClaim is an add-on module for Thermal Desktop providing a direct port to CRTech SpaceClaim, enhancing the CAD preparation process. Analysts can extend the CAD preparation features in SpaceClaim by meshing surfaces and solids during import into Thermal Desktop, tag surfaces for heat loads, contact conductance, convection, and easily update the mesh if the part geometry changes. Thermal Meshing Historically, thermal analysts have been burdened by having to use structural meshes which are not appropriate for modeling a thermal system. Structural meshes are focused on stress risers in a threaded bolt holes and fillets, both areas which are not of interest thermally. Consequently these meshes are too detailed for system-level thermal studies, and are inappropriate when you add convection or radiation, resulting in thermal models having too much detail and becoming slow to execute. With Mesh Generation for SpaceClaim, you can generate a very coarse mesh if need be, even skipping details that you didnt bother to eliminate using SpaceClaim. Meshes can be locally customized allowing more detail in certain areas, perhaps in a contact conductance zone, or they can be customized by type of mesh. Thermal Desktop and SpaceClaim Integration Being fully integrated with both SpaceClaim and Thermal Desktop, the Mesh Generation addon makes it possible to avoid repetitious tasks because you arent just generating a mesh, you are describing what to do with that mesh and with any thermal nodes and elements that result when the object is meshed and imported into Thermal Desktop. You can associate material properties and optical properties directly in SpaceClaim, allowing thermal capacitances, conductances and radiation attributes to be automatically defined during the mesh import process. You can explain to the program that the bottom of a battery sleeve should be available for thermal contact, for example. Whatever elements are subsequently generated will be automatically included in the contact conductance you have set up in Thermal Desktop.
CRTech SpaceClaim is devoted to the preparation of CAD models for thermal analysis.
The ability to repair and defeature geometry in SpaceClaim along with the advanced Thermal Mesher allow the creation of meshes appropriate for thermal modeling.
Domains in Mesh Generation for SpaceClaim translate into Thermal Desktop Tag Sets, allowing a surface to be selected for contact conductance, heat transfer, and heat loads. When the geometry changes, the domain remains in place for rapid design changes.
C&R TECHNOLOGIES
Phone 303.971.0292 Facsimile 303.971.0035
www.crtech.com
SpaceClaim is a registered trademark of SpaceClaim Corporation. 2011, Cullimore and Ring Technologies, Inc. All rights reserved. All other company, brand and product names are trademarked or registered to their respective manufacturers.