Professional Documents
Culture Documents
CHAPTER - S-1
All items which are manufactured ISI marked, shall only be used. This condition shall be always incorporated in special condition of contract.
Description 2 Water Closets Providing and fixing Squatting Pan (Indian type) white glazed vitreous china 1st quality W.C. Pan (IS : 2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor (excluding the pair of foot rest).
Unit 3
Size 450 mm Size 510 mm Size 580 mm Providing and fixing Indian Type white glazed vitreous china 1st quality W.C. Orissa pan (IS : 2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor.
S-2
Description 2 Size 530 x 410 mm Size 580 x 440 mm Providing and fixing WVC Foot-rest (IS : 2556 Mark) including cutting and making good the floor size.
11.66 8.43
250 x 130 x 30 mm 250 x 125 x 25 mm Providing and fixing European type white glazed vitreous china 1st quality W.C. pan (IS : 2556 Mark) P or S Trap including cutting and making good the wall and floor. Providing and fixing European type white glazed vitreous china 1st quality Double syponic W.C. (IS : 2556 Mark) P or S Trap including cutting and making good the wall and floor. Providing and fixing Universal (anglo-Indian type) white glazed vitreous china W.C. pan 1st quality with P or S trap including cutting, making good the wall and floor.
Pair Pair
125.00 115.00
125.00 88.00
0.00 -23.48
Each
660.00
720.00
9.09
1.5
Each
2140.00
2300.00
7.48
1.6
Each
1200.00
1320.00
10.00
S-3
Description 2 Providing and fixing European type white glazed vitreous china 1st quality W.C. (IS : 2556 Mark) including cutting and making good the wall and floor. Wall mounting Wall mounting (Extended) Wall mounting (Syphonic) Add extra over Item No. 1.1 to 1.7 for using approved light coloured vitreous china ware instead of white vitreous china ware Providing and fixing Water Closet Seat Covers with brass hinges complete. Solid (PVC) (ISI marked) grade - I black for EWC -- do -- white -- do -- Coloured Non Breakable of other approved make black -- do -- white
Unit 3
Each
50%
0.50
0.00
1.8
S-4
Description 2 -- do -- Coloured Providing and fixing C.P. lugs for toilet seat cover Labour Charges for removing W.C. Pan (any type) of all sizes with care including all necessary fittings P or S Trap. Providing and fixing white glazed Conversion Bend for W.C. from P trap to S trap. Providing and fixing vitreous china P trap of approved quality. Add extra if C.I. P Trap is used in place of Vitreous china P Trap for W.C.
0.00 0.00
Each
80.00
80.00
0.00
1.11 1.12
Each Each
105.00 145.00
105.00 145.00
0.00 0.00
Each
90.00
90.00
0.00
1.14
Providing and fixing white Vitreous China Double Syphonic European W.C. (IS : 2556 Mark) with mounted WVC flushing cistern of (IS : 2556 Mark) of 10 litre capacity complete with all necessary internal fittings including cutting and making good the wall and floor. URINALS Providing and fixing 1st quality WVC Urinal (IS : 2556 mark) with 25 mm dia G.I. waste pipe, dome couplings, concealed iron brackets or screws etc.Complete
Each
3700.00
4200.00
13.51
1.15
S-5
Description 2 Flat Back (Small) size 440 x 265 x 315 mm Flat Back (large) or half stall size 590 x 375 x 390 mm Mini Stall size 440 x 315 x 320 mm Angle Back or Spree flat back size 430 x 370 x 340 mm or 440 x 350 x 370 mm Providing and fixing W.V.C. Urinal Partition Plate of approved standard make of size 630 x 315 mm including making good the wall. Providing and fixing Marble Urinal Partition slab both sides polished of approved design cut from marble size 900 x 600 mm. Makrana II quality marble having light spots Makrana 'Albeta' marble having light streaks Makrana 'Adanga' or Rajnagar 1st quality white or Andhi Indo- Italian marble
Unit 3 Each
11.11
Each Each
1230.00 750.00
1400.00 750.00
13.82 0.00
1.15.3 1.15.4
Each
500.00
500.00
0.00
1.16
Each
375.00
450.00
20.00
1.17
Each Each
550.00 490.00
600.00 550.00
9.09 12.24
Each
425.00
450.00
5.88
S-6
Description 2 Providing and fixing W.V.C. Half-Round Channel of approved make in C.M. 1 : 3, joints finished in white cement of. Size 100 mm dia Size 150 mm dia Providing and fixing W.V.C. (IS : 2556 Mark) Squatting Urinal of standard make complete including cutting & making good the floor. Size 450 x 350 mm Size 600 x 350 mm Labour Charges for removing and refixing of urinals (all type & sizes) including all necessary fittings. Providing and fixing High Level Flushing Cistern of 10 litres capacity of approved make including C.I. brackets duly painted, chain & pull and 32 mm dia G.I. concealed flush pipe with M.S. clamps, 20 mm dia G.I. overflow pipe upto 185 cm. Long brass ball cock (IS : 1703 Mark) with PVC ball and internal fittings and mosquito proof coupling, complete including cutting and making good the wall.
Unit 3
Mtr Mtr
350.00 450.00
327.00 450.00
-6.57 0.00
Each Each
370.00 450.00
400.00 450.00
8.11 0.00
Each
120.00
120.00
0.00
1.21
S-7
Description 2 Cast Iron (IS: 774 Mark) White PVC (IS: 7231 Mark) Providing and fixing Low Level Flushing Cistern of 10 litres capacity (IS : 2556 Mark) of approved make with complete fittings, C.I. brackets duly painted, brass ball cock with ball, (IS : 1703 Mark) complete including cutting and making good the wall. WVC with C.P. Brass bend PVC with PVC bend as per IS : 7231 WVC for syphonic EWC PVC with CP brass long band Providing and fixing Automatic Flushing Cistern of first quality (IS : 774 Mark) of approved make fitting, siphon with copper tube, C.I. brackets complete including cutting and making good the wall. C.I 5 Litres C.I 10 Litres
0.00 15.00
1.23.1 1.23.2
Each Each
430.00 515.00
430.00 515.00
0.00 0.00
S-8
Chapter Code No. 1 1.23.3 1.23.4 1.23.5 1.23.6 Note :1.24 1.24.1 1.24.2 1.24.3 1.24.4 1.25
Description 2 C.I 15 Litres White vitreous China 5 Litres as per IS 2556 -- do -- 10 Litres -- do -- 15 Litres Deduct if plastic syphon is used Providing and fixing Flush pipe of approved make with complete fittings for high level flushing cistern : 'B' class (Concealed) 25 mm G.I. --do-- 32 mm PVC exposed (heavy) 32 mm GI Sheet hot galvanized exposed (10 Litres) Providing and fixing WVC (10 Litres) low-level flushing cistern with cover. Providing and fixing WVC (10 Litres) low-level flushing cistern cover only. Providing and fixing WVC Syphon with plunger plate only
Each
525.00
630.00
20.00
1.26
Each
170.00
230.00
35.29
1.27
Each
145.00
165.00
13.79
S-9
Description 2 Providing and fixing WVC Auto cistern with cover only. Providing and fixing WVC Auto cistern cover only Providing and fixing C.P. Brass Urinal Flush Pipe set complete with flanged brackets of approved make. For 4 Urinals For 3 Urinals For 2 Urinals For 1 Urinal Providing and fixing C.P. Brass Urinal Spreader for stall urinal of approved make. --do-- Synthetic (PTMT) Providing and fixing C.P. Brass Doom Waste Coupling 32 mm dia. --do-- 40 mm dia Providing and fixing Plastic Syphon of approved make for automatic flush tank.
Unit 3
Each Each
325.00 85.00
365.00 95.00
12.31 11.76
1.29 1.30
1.31.1 1.32
Each Each
100.00 125.00
120.00 150.00
20.00 20.00
1.32.1 1.33
Each
80.00
96.00
20.00
S-10
Description 2 Providing and fixing Copper tube Syphon for auto flush tank Removing and refixing of wash hand basin including all necessary fittings. Providing and fixing C.I. Brackets duly painted including cutting & making good the wall. Providing and fixing C.P. Brass Flush Valve with C.P. flush bend of approved make. Lever type with Elbow 32 mm dia Push --- do --Concealed type for 112 mm -- Do -- for 225 mm Economy model 25 mm Economy model 32 mm
WASH BASIN
Unit 3
Each Each
200.00 100.00
260.00 100.00
30.00 0.00
1.36
Pair
80.00
80.00
0.00
1.37
S-11
Description 2 P & F WVC Wash Basin (1st quality IS : 2556 mark) of approved make with C.I. brackets duly painted, 1 No. 15 mm C.P.Pillar cock (IS : 8934 mark) & 32 mm C.P. brass waste coupling of approved make, 25 mm G.I. waste pipe complete including cutting & making good the wall. Size 450 mm x 300 mm Size 510 mm x 400 mm Size 510 mm x 250 mm Size 530 mm x 450 mm Size 550 mm x 400 mm Size 580 mm x 450 mm Size 610 mm x 510 mm Size 630 mm x 510 mm (With Anti Splash Rim) Size 400 mm x 400 mm or 450 mm x 390 mm Corner
Unit 3
Each Each
900.00 1350.00
1005.00 1350.00
11.67 0.00
S-12
Description
1 2 1.39.11 Size 550 x 400 mm dia for counter top 1.39.12 Size 630 x 500 mm dia for counter top 1.40 Providing and fixing Terrazo (Mosaic) wash hand basin with supporting brackets waste coupling and PVC waste pipe complete, including painting of brackets making good the walls. Size 450 mm x 280 mm Size 550 mm x 400 mm
KITCHEN & LAB SINKS
2.73 20.00
Each Each
450.00 500.00
450.00 500.00
0.00 0.00
P & F Kitchen & Lab Sink of approved make with C.I. brackets duly painted, 40 mm C.P. waste coupling, C.P. Brass chain with rubber plug, 40 mm G.I. waste pipe upto floor level complete including cutting & making good the wall & floor. Fire Clay glazed Kitchen Sink (I.S.Marked) size 600 x 450 x 250 mm Fire Clay glazed Kitchen Sink (I.S.Marked) size 600 x 450 x 200 mm WVC Lab Sink (I.S.2556 mark) size 530 x 430 x 180 mm
1.41.1
Each
2045.00
2100.00
2.69
1.41.2
Each
1975.00
2000.00
1.27
1.41.3
Each
1400.00
1550.00
10.71
S-13
Description 2 -- do --size 500 x 350 x 150 mm -- do --size 450 x 300 x 150 mm Mosaic fine polished Kitchen sink size 600 x 450 x 200 mm -- do -- size 450 x 450 x 200 mm -- do -- size 600 x 450 x 200 mm with 600 x 450 mm drain board 1.0 mm thick Salem stainless steel AISI - 304 Kitchen sink of approved make (Nirali, NeelKanth, Jaina, Faber, Criystal ) With large waste couplings
Over all size (Inches) Bowl Size (Inches)
1.41.7 1.41.8
Each
600.00
660.00
10.00
1.41.9
16 x 14 x 6 20 x 16 x 7 20 x 16 x 8
17 x 15 x 7 (with drain board) 20 x 16 x 8 (with drain board)
Deduct for Item No. 1.41.9 to 1.41.14 for using any other make than specified above
Each
35%
0.35
0.00
S-14
Description 2 Providing and fixing Drain Board of approved make with C.I. brackets duly painted complete including cutting & making good the wall. WVC (IS : 2556 Mark) size 580 x 350 mm WVC (IS : 2556 Mark) size 530 x 450 mm WVC (IS : 2556 Mark) size 600 x 450 mm Stainless Steel size 600 x 450 mm Mosaic Fine polished size 600 x 450 Providing and fixing 1st quality WVC Pedestal for wash basin
MISCELLANEOUS
Unit 3
Each
525.00
540.00
2.86
Providing and fixing Bottle Trap of approved make C.P. Brass 32 mm C.P. Brass 40 mm Synthetic Material (PTMT) 32 mm Synthetic Material (PTMT) 42 mm Each Each Each Each 350.00 375.00 280.00 300.00 350.00 375.00 280.00 300.00 0.00 0.00 0.00 0.00
S-15
Description 2 P.V.C. Providing and fixing Waste Coupling with fittings of approved quality / make. C.P. Brass 32 mm dia C.P. Brass 40 mm dia Synthetic Material (PTMT) 32 mm Synthetic Material (PTMT) 40 mm Providing and fixing Waste Pipe with all fittings. P.V.C. with C.P. nut 32 mm P.V.C. with P.V.C. nut 32 mm P.V.C. with C.P. nut 40 mm dia G.I. (B Class) 32 mm G.I. (B Class) 40 mm
Unit 3 Each
0.00
1.45.1 1.45.2 1.45.3 1.45.4 1.46 1.46.1 1.46.2 1.46.3 1.46.4 1.46.5
S-16
Description 2 Providing and fixing Beveled edge Mirror of special glass of approved make (Atul / equivalent) complete with 6 mm thick asbestos cement sheet ground fixed to wooden screws & washers. Size 600 x 450 x 4 mm thick Other Size For other quality approved make mirrors deduct 30 % P & F Looking Mirror with PVC Frame of approved (Atul/ Equivalent) Size 500 x 400 mm Oval Shape 450 x 350 mm Round 500 mm dia For other quality approved make mirrors deduct 30 % Providing and fixing Toilet Shelf of approved quality / make W.V.C. (IS : 2556 Mark) Size 300 mm.
Unit 3
Each Sqm
210.00 650.00
210.00 650.00
0.00 0.00
1.48
1.49
1.49.1
Each
115.00
135.00
17.39
S-17
Description 2 W.V.C. (IS : 2556 Mark) Size 550 mm. Synthetic Material white tumbler of approved quality / make size 470 x 114 x 36 mm. Hard Plastic of Commander / equivalent size 590 x 140 mm. Acrylic shelf on C.P. Brass casted brackets & guard rail of Commander equivalent make Size 550 x 125 mm. Glass Shelf with edges rounded off Anodised Aluminium angle frame & C.P. Brass brackets & guard rail Size 600 x 120 mm.. Providing and fixing Towel Rail or Ring of approved quality / make. C.P. Brass Towel rail elbow type with concealed screws size 450 mm (Heavy Duty). C.P. Brass Towel rail elbow type with concealed screws size 600 mm (Heavy Duty). C.P. Brass Towel rail with brackets 450 x 20 mm.
Unit 3 Each
0.00
Each
150.00
155.00
3.33
1.49.4
Each
150.00
150.00
0.00
1.49.5
Each
580.00
580.00
0.00
1.49.6
Each
105.00
105.00
0.00
1.50
1.50.1
Each
270.00
270.00
0.00
1.50.2
Each Each
300.00 150.00
300.00 150.00
0.00 0.00
1.50.3
S-18
Description 2 C.P. Brass Towel rail with brackets 600 x 20 mm Synthetic Material (PTMT) of approved quality / make Size 525 x 90 x 75 mm. Synthetic Material (PTMT) of approved quality / make Size 675 x 90 x 75 mm. WVC (1st quality, ISI Marked) of approved make, Recessed towel Hanger Size 108 x 108 mm. C.P. Brass Towel Ring revolving type. Synthetic Material (PTMT) Towel Ring of approved quality / make. P & F Grating of approved quality/ make Stainless Steel Sheet Size 125 mm dia (--do--) Heavy Quality of approved make 125 mm Synthetic Material (PTMT) of approved quality/ make size 125 mm dia (--do--) 150 mm dia (--do--) Square 150 x 150 x 8 mm (Anti Cockroach)
Unit 3 Each
0.00
Each
75.00
75.00
0.00
1.50.6
Each
85.00
85.00
0.00
1.50.7
Each Each
80.00 100.00
80.00 100.00
0.00 0.00
1.50.8 1.50.9
Each
90.00
90.00
0.00
Each Each
30.00 45.00
30.00 45.00
0.00 0.00
Each Each
40.00 55.00
40.00 55.00
0.00 0.00
1.51.4 1.51.5
Each
160.00
160.00
0.00
S-19
Description 2 C.P. Brass with frame (Heavy) & Superior quality size 125 mm dia (--do--) light & superior quality size 125 mm dia Cast Iron Providing and fixing Liquid Soap Container with brackets complete of approved make. C.P. Brass Synthetic Material of approved quality/ make Providing and fixing Tooth Paste & Brush Holder of approved quality / make. C.P. Brass C.P. Brass (Heavy & Superior Quality) Stainless Steel Providing and fixing Toilet Paper Holder with rod of approved quality / make. C.P. Brass C.P. Brass (Heavy & Superior Quality)
Unit 3
Each Each
100.00 85.00
100.00 85.00
0.00 0.00
Each Each
90.00 280.00
90.00 280.00
0.00 0.00
S-20
Description 2 WVC (1st quality ISI Marked) recessed size 150 x 150 mm (-- do -- ) exposed (-- do --) Providing and fixing Soap Dish or Tray of approved quality / make. C.P. Brass C.P. Brass (Heavy & Superior Quality) WVC (1st quality ISI Marked) recessed size 150 x 150 mm (--do--) 200 x 100 mm (--do--) Soap Tray 170 mm (--do--) Soap Dish 380 mm Providing and fixing Twin-peg of approved quality / make. C.P. Brass C.P. Brass (Heavy & Superior Quality) Acrylic
Unit 3
Each Each
130.00 110.00
150.00 120.00
15.38 9.09
Each Each
45.00 60.00
45.00 60.00
0.00 0.00
S-21
Description 2 Providing and fixing Shower arm 15 mm dia of approved quality / make. C.P. Brass heavy & superior quality 150 mm Projection (-- do --) Size 220 mm (--do--) (-- do --) Size 300 mm (--do--) (-- do --) Size 370 mm (--do--) Providing and fixing Bath Shower of approved quality / make. C.P. Brass fixed. C.P. Brass of Heavy & Superior quality 150 mm. C.P. Brass of Heavy & Superior quality, revolving with adjustable key 150 mm. WVC (IS : 2556 Mark) of approved make 125 mm
Unit 3
1.57.1
Each Each
75.00 190.00
75.00 190.00
0.00 0.00
Each
300.00
300.00
0.00
1.58.4
Each 1.59 1.59.1 Providing and fixing Extension Pipe for bib cocks of approved quality / make. C.P. Brass of heavy & superior quality 50 x 15 mm
90.00
90.00
0.00
Each
50.00
50.00
0.00
S-22
Description 2 (-- do --) 100 x 15 mm (-- do --) 150 x 15 mm Providing and fixing Acrylic Toilet accessories set consisting of Towel rail, shelf, towel ring, soap dish, paste & brush holder & twin peg of approved quality / make. Labour Charges for removing WVC, W.C. Pan Indian/ Orissa Pan European W.C. Flushing Cistern Providing and fixing Jet Spray for water closet with C.P. Copper Tube flange of approved make Providing & Fixing C.P. Flange for 15 mm dia taps
0.00 0.00
Each
70.00
70.00
0.00
1.63
S-23
Description 2 Providing and fixing 1st quality standard white/ Ivory Glazed Tiles ISI marke (IS: 13753) of size 300 x 200 mm in walls, Floors, Steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in white cement mixed with pigment to match the shade of tile complete (excluding the cost of cement plaster). Category - I Kajaria, Johnson, Orient, Somani make etc. Category - II : Bell, Thar make etc. Providing and fixing 1st quality MAT Finished Ceramic Tiles size 300 x 300 mm confirming to IS : 13753 colour such as white grey ivory, fume red brown in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry including nicely finished joints using water proof joint filler powder (Unitile or Roffe make) and finishing with flush pointing in white cement mixed with pigment to match the shade of tile complete (excluding cost of cement plaster).
Unit 3
(A)
Sqm Sqm
438.00 379.00
495.00 395.00
13.01 4.22
(B) 1.65
Sqm
449.00
525.00
16.93
S-24
Description 2 Providing and fixing 1st quality MAT Finished Ceramic Tiles size 300 x 300 mm confirming to IS : 13753 coloured tile except white grey ivory, fume red brown in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry including nicely finished joints using water proof joint filler powder (Unitile or Roffe make) and finishing with flush pointing in white cement mixed with pigment to match the shade of tile complete (excluding cost of cement plaster).
Unit 3
Sqm
478.00
450.00
-5.86
Note (1)
Add extra over item No. 7.3, 7.4 & 7.5 for floor work due to extra cost of cement mortar 1 : 4 ( 1 Cement : 4 fine sand) 20 mm thick Add extra over item No. 7.3,for using coloured glazed tiles instead of white / ivory Deduct over item No. 7.3, 7.4 & 7.5 for using tiles of approved make second quality tiles Add extra over item No. 7.3, 7.4 & 7.5 for Marble printed granite shade tiles Add extra over item No. 7.4 & 7.5 for using 400 x 400 mm size tiles
Sqm
31.00
50.00
61.29
(2)
Sqm
25.00
50.00
100.00
(3) (4)
Sqm Sqm
10 % 20 %
0.10 0.20
0.00 0.00
(5)
Sqm
50.00
50.00
0.00
S-264
CHAPTER - S-2
10
11
"A" Class
"B" Class
(a) 2.1.1 2.1.2 2.1.3 2.1.4 2.1.5 2.1.6 2.1.7 2.1.8 (b)
Mtr Mtr
80.00 95.00
85.00 108.00
94.00 114.00
102.00 127.00
17.50 20.00
20.00 17.59
S-274
Chapter Code No. 1 2.2.1 2.2.2 2.2.3 2.2.4 2.2.5 2.2.6 2.2.7 2.2.8 2.2.9 2.2.10 2.3
Description 2 15 mm dia nominal bore 20 mm dia nominal bore 25 mm dia nominal bore 32 mm dia nominal bore 40 mm dia nominal bore 50 mm dia nominal bore 65 mm dia nominal bore 80 mm dia nominal bore 100 mm dia nominal bore 125 mm dia nominal bore Making connection of G.I. distribution branch with G.I. main including all fittings. Upto 25 mm dia Beyond 25 mm & upto 100 mm dia Fixing water meter (IS : 779 Mark) and stop cock in G.I. pipe line including making chamber of approved size excluding cost of water meter & Stop cock. Mtr Mtr Mtr Mtr Mtr Mtr Mtr Mtr Mtr Mtr
Unit 3 58.00 74.00 107.00 136.00 142.00 198.00 246.00 336.00 516.00 672.00
Rate 2005 4 70.00 89.00 116.00 146.00 165.00 221.00 287.00 355.00 550.00 750.00
Proposed Rate 5 69.00 88.00 127.00 159.00 170.00 237.00 295.00 378.00 537.00 672.00 6 84.00 106.00 139.00 175.00 198.00 265.00 344.00 426.00 632.00 867.00
Variation A Increase
Variation B
7 18.966 18.919 18.692 16.912 19.718 19.697 19.919 12.500 4.070 0.000
9 20.00 19.10 19.83 19.86 20.00 19.91 19.86 20.00 14.91 15.60
10
11
Each Each
100.00 160.00
120.00 192.00
20.00 20.00
Each
120.00
122.00
1.67
2.5
Providing and fixing Water meter (IS : 779 Mark) of approved make.
S-284
Description 2
Variation A Increase
Variation B
10
11
Note :(a) The Rates are for ISI marked item (b) It the items are non ISI marked, reduce the rate by 25 % 2.6 Providing and fixing Pillar Cocks (IS : 8934 Mark) of superior quality and approved make. 2.6.1 2.6.2 2.6.3 C.P. Pillar cock, 15 mm dia nominal bore C.P. Pillar cock, Elbow action, 15 mm dia nominal bore C.P. Pillar cock, fancy type, 15 mm dia nominal bore C.P. Pillar cock, Swan neck with casted spout, 15 mm dia nominal bore C.P. Pillar cock, high neck, 15 mm dia nominal bore Synthetic Material (PTMT) pillar cock of approved quality. Make 15 mm nominal bore P & F bib cock (IS: 8931 mark) superior quality of approved make Brass 400 gm, 15 mm nominal bore Each 120.00 160.00 33.33 Each 230.00 310.00 34.78
Each Each
320.00 320.00
430.00 430.00
34.38 34.38
2.6.4 2.6.5
Each Each
390.00 250.00
515.00 330.00
32.05 32.00
2.6.6
Each
125.00
125.00
0.00
2.7
2.7.1
S-294
Description 2 P.V.C. heavy duty 15 mm nominal bore C.P. Brass bib cock, 15 mm nominal bore C.P. brass swan neck, 15 mm nominal bore (--do--) long body, 15 mm nominal bore weight not less than 690 gm (--do--) long nose, 15 mm nominal bore weight not less than 810 gm (--do--) Elbow action, 15mm nominal bore Synthetic Material (PTMT) bib cock of approved quality/ make nominal bore 15 mm 86 mm long (--do--) fancy type, 122 mm long (--do--) long body , 175 mm long Providing and fixing Stop Cock (IS : 8931 Mark) Superior quality & of approved make. Brass 400 gm, 15 mm nominal bore Brass 750 gm, 20 mm nominal bore Brass 1350 gm, 25 mm nominal bore C.P.Brass , 15 mm nominal bore (--do--) Concealed stop cock , 15 mm
Variation A Increase
Variation B
10
11
Each
255.00
335.00
31.37
2.7.6
Each Each
305.00 315.00
405.00 425.00
32.79 34.92
2.7.7 2.7.8
S-304
Description 2 Synthetic Material (PTMT) stop cock of approved quality/ make 15 mm (--do--) Concealed stop cock , 15 mm Providing and fixing Sink Cocks of superior quality of approved made. C.P.Sink Cock, swinging spout 15 mm (--do--) Casted Spout 15 mm Providing and fixing Push Cock, superior quality, of approved make. C.P. Brass 15 mm Synthetic Material (PTMT) push cock of approved quality/ make 15 mm Providing and fixing Ball Cock (IS : 1703 Mark) with Rod & P.V.C. Ball complete.
Unit 3
Rate 2005 4
Proposed Rate 5 6
Variation A Increase
Variation B
10
11
Each Each
100.00 140.00
100.00 140.00
0.00 0.00
Each Each
395.00 450.00
450.00 490.00
13.92 8.89
Each
180.00
215.00
19.44
Each
85.00
85.00
0.00
Brass wt. 400 gm 15 mm Brass wt. 750 gm 20 mm Brass wt. 1000 gm 25 mm Brass wt. 1000 gm 32 mm Brass wt. 1200 gm 40mm Brass wt. 2000 gm 50 mm
S-314
Description 2 Synthetic Material (PTMT) of quality/ make 15 mm nominal size (--do--) 20 mm nominal size (--do--) 25 mm nominal size
Variation A Increase
Variation B
10
11
2.11.8 2.11.9
2.11.10 (--do--) 50 mm nominal size 2.12 Providing and fixing Inlet Connection (Angle, Valves) Superior quality, of approved make.for wash basin Gyser etc. C.P. Inlet connection 15 mm.Brass (IS: 8931 marked) (--do--) with 37 cm long pipe and nut (--do--) with 37 cm long thread and nut
2.12.4. Synthetic Material (PTMT) Inlet connection of approved quality/ make 15 mm nominal size 2.13 Providing and fixing 15 mm dia Connection Pipe of approved quality / make. PVC Pipe with C.P. Brass nuts upto length 300 mm (--do--) upto length 370 mm (--do--) upto length 450 mm (--do--) upto length 600 mm CP Brass Pipe with CP brass nuts upto length 300 mm
Each
95.00
95.00
0.00
2.13.1
Each
32.00
32.00
0.00
S-324
Description 2 (--do--) upto length 370 mm (--do--) upto length 450 mm (--do--) upto length 600 mm Providing and fixing Flush Cock / Flush Valve (IS : 9758 Mark) for WC of approved quality make. CP Brass push type 15 mm nominal bore CP Brass push type 20 mm nominal bore (--do--) exposed 25 mm nominal bore (--do--) 32 mm nominal bore (--do--) concealed 25 mm nominal bore (--do--) concealed 32 mm nominal bore (--do--) half turn exposed 25 mm nominal bore (--do--) concealed 25 mm nominal bore Brass / Gun Metal Half turn wt. 1 Kg of approved quality / make 25 mm nominal bore
Variation A Increase
Variation B
10
11
Each Each
275.00 1230.00
300.00 1305.00
9.09 6.10
2.14.10 CP Brass flush valve 32 mm nominal bore 2.15 Providing and fixing Full -way Valve (IS : 778 Mark) or wheel valve of approved make. Gun Metal 15 mm nominal bore
2.15.1
Each
150.00
165.00
10.00
S-334
Description 2 Gun Metal 20 mm nominal bore Gun Metal 25 mm nominal bore Gun Metal 32 mm nominal bore Gun Metal 40 mm nominal bore Gun Metal 50 mm nominal bore Providing and fixing Gun Metal Non-return Valve or Check Valve (IS : Make) of approved make, superior quality.
Variation A Increase
Variation B
10
11
Hori
Vertical
Hori
Vertical
15 mm nominal bore 20 mm nominal bore 25 mm nominal bore 32 mm nominal bore 40 mm nominal bore 50 mm nominal bore Providing and fixing Flush Valve (Hydraulic) with level complete (IS : 9758 Mark) of approved make. 32 mm nominal bore 25 mm nominal bore
8 3.684211 0 0 0 -2.77778
2.17.1 2.17.2
Each Each
1500.00 1300.00
1650.00 1430.00
10.00 10.00
S-344
Description 2 Providing and fixing Oxidised Gas Taps, Bench type of superior quality and approved make One way Two Way Three way Four Way Providing and fixing Chromium plated Swanneck Laboratory Cock of approved quality / make. One way Two Way Three way Four Way Providing and fixing Spouts of superior quality and approved make. C.P. Brass spout (--do--) extra heavy with flange Providing and fixing Mixing Range (15 mm). C.P. One hole / close hole basin mixer with casted spout. Each Each Each Each
Unit 3
Rate 2005 4
Proposed Rate 5 6
Variation A Increase
Variation B
10
11
Each Each
375.00 460.00
450.00 552.00
20.00 20.00
Each
1025.00
1180.00
15.12
S-354
Description 2 C.P. One hole / close hole basin mixer with swinging spout casted. C.P. Sink mixer with swinging spout J-Pipe. C.P. Sink mixer with casted spout. C.P. Valve mixer non-telephonic type. C.P. Wall mixer telephonic type crutch & telephonic shower. C.P. Wall mixer telephonic type without crutch & telephonic shower. C.P. Bath tub mixer without telephonic shower but with crutch. C.P. Surgical basin mixer elbow action
Variation A Increase
Variation B
10
11
Each
1900.00
2000.00
5.26
2.21.7
Each
1500.00
1650.00
10.00
2.21.8
Each Each
1650.00 1400.00
1850.00 1550.00
12.12 10.71
2.21.9
2.21.10 C.P. Surgical basin mixer elbow action with shower (Wall type). 2.22 Providing and fixing Divertors of superior quality and approved make. C.P. Brass Tip-tone divertor bath spout with mixing valve. C.P. Brass Tip-tone divertor bath spout with Concealed Five day divertors. C.P. Brass Tip-tone divertor bath spout with Concealed Four Way divertors
Each
2000.00
2250.00
12.50
2.22.1
Each
1300.00
1560.00
20.00
2.22.2
Each
1300.00
1580.00
21.54
2.22.3
Each
1250.00
1495.00
19.60
S-364
Description 2 C.P. Brass Tip-tone divertor bath spout with Concealed Three Way divertors. C.P. Brass Tip-tone divertor bath spout with Concealed Two Way with 22 Cm. pipe flange. Providing and fixing Bidet (IS : 2556 Mark) of superior quality and approved make with fittings. C.P. Brass Bidet fittings without Pop-up. (--do--) with shower and pop- up watse Providing and fixing Precast RCC Water Storage Tank with RCC cover 25 mm thick and 15 Cm. long G.I. over-flow pipe including making connections etc. & hoisting upto 1 M ht. from ground level having. 340 Litres water capacity Size 90 x 75 x 60 Cm. 270 Litres water Capacity Size 90 x 60 x 60 Cm. Hoisting Charges of precast RCC Water storage tank on each floor. 340 Litres water capacity 270 Litres water capacity Each Each
Unit 3 Each
Variation A Increase
Variation B
9 20.42
10
11
2.22.5
Each
750.00
900.00
20.00
2.23
1900.00 2200.00
2250.00 2600.00
18.42 18.18
2.24.1
Each
450.00
540.00
20.00
2.24.2
Each
400.00
480.00
20.00
Each Each
100.00 75.00
120.00 90.00
20.00 20.00
S-374
Description 2 Providing and fixing PVC Storage tank confirming to IS : (12701 marked indicating the BIS license No) of approved make with cover, 25 mm dia 1 M long G.I. over-flow pipe & 25 Cm. Long wash out pipe with plug & socket, including making connection etc. complete of approved design. 200 Litres capacity 300 Litres capacity 500 Litres capacity 750 Litres capacity 1000 Litres capacity 2000 Litres capacity 3000 Litres capacity 5000 Litres capacity Hoisting Charges for each floor. For Items 2.26.1 to 2.26.4 For Items 2.26.5 to 2.26.8 Providing and fixing Bitumen Paint Coating over G.I. Pipes Complete as per Specifications. 15 mm dia 20 mm dia Rmt Rmt Each Each
Unit 3
Rate 2005 4
Proposed Rate 5 6
Variation A Increase
Variation B
10
11
2.26.1 2.26.2 2.26.3 2.26.4 2.26.5 2.26.6 2.26.7 2.26.4 2.27 2.27.1 2.27.2 2.28
25.00 50.00
25.00 50.00
0.00 0.00
2.28.1 2.28.2
0.75 1.00
0.75 1.00
0.00 0.00
S-384
Unit 3
Variation A Increase
Variation B
9 0.00 0.00
10
11
2.29.1
PE- AL- PE Composite pressure pipes and fittings :Providing and fixing Polyethylene Aluminium Polyethylene (PE-AL-PE) composite pressure pipes U.V. stabilised with carbon black confirming to ASTMF- 1282 - 1995 for water supply including clamps at one metre spacing cutting and making good the walls etc. (internal work) Exposed on wall Metre Metre Metre Metre Metre 107.20 127.35 163.35 223.00 294.35 115.00 140.00 175.00 245.00 315.00 7.28 9.93 7.13 9.87 7.02
2.29.1.1 1216 (16 mm OD) pipe 2.29.1.2 1620 (20 mm OD) pipe 2.29.1.3 2025 (25 mm OD) pipe 2.29.1.4 2532 (32 mm OD) pipe 2.29.1.5 3240 (40 mm OD) pipe 2.30 Providing and fixing Polyethylene Aluminium Polyethylene (PE-AL-PE) composite pressure pipes U.V. stabilised with carbon black confirming to ASTMF- 1282 - 1995 for water supply including cutting and making good the walls etc. Concealed installation including cutting chases and making good the walls etc. complete
2.30.1
S-394
Unit 3
Variation A Increase
Variation B
1 2.30.1.1 1216 (16 mm OD) pipe 2.30.1.2 1620 (20 mm OD) pipe 2.30.1.3 2025 (25 mm OD) pipe 2.30.1.4 2532 (32 mm OD) pipe 2.30.1.5 3240 (40 mm OD) pipe 2.31
10
11
Providing and fixing Polyethylene Aluminium Polyethylene (PE-AL-PE) composite pressure pipes U.V. stabilised with carbon black confirming to ASTMF- 1282 - 1995 for water supply including trenching & refilling etc. (External work)
1216 (16 mm OD) pipe 1620 (20 mm OD) pipe 2025 (25 mm OD) pipe 2532 (32 mm OD) pipe 3240 (40 mm OD) pipe
The pipes are denoted by ID OD eg , 1216 = 12mm inner dia x 16 mm outer dia
S-404
Description 2
Unit 3
Rate 2005 4
Proposed Rate 5 6
Variation A Increase
Variation B
10
11
S-65
CHAPTER - S-3
Unit
Proposed Rate
Variation Decrea se
3.1
Providing Laying & Jointing glazed S.W. pipes grade "A" (IS : 651 Marked) of approved make with spun yarn & stiff mixture of cement mortar 1:1 excavation & refilling of earth in all types of soil upto 1.2 m. depth, S.W. fittings, including testing of joints etc. complete. 100 mm dia 150 mm dia 200 mm dia 230 mm dia 250 mm dia 300 mm dia 400 mm dia
S-66
Description
Unit
Proposed Rate
Variation
If grade "AA" S.W. pipe (IS: 651 Mark) are used then add 5 % Deduct 5 % if jointing is done in CM 1 : 3 Providing and Laying C.C. 1 : 5 : 10 (stone aggregate 40 mm nominal size) all around S.W. pipe including 15 cm. thick bed concrete as per Rajasthan PWD specifications : (Width W = Diameter of pipe in Cm + 40 Cm.). (Excluding cost of pipe ) 100 mm dia S.W. Pipe 150 mm dia S.W. Pipe 200 mm dia S.W. Pipe 230 mm dia S.W. Pipe 250 mm dia S.W. Pipe 300 mm dia S.W. Pipe 350 mm dia S.W. Pipe 400 mm dia S.W. Pipe Providing and Laying C.C. 1 : 5 : 10 (stone aggregate 40 mm nominal size) upto haunches of S.W. pipes including 150 mm thick bed concrete as per Rajasthan PWD specifications : (Width W = Dia of pipe in Cm + 40 Cm.) concrete width to be reduced from width W at centre of pipe to '0' at top of pipe.(Excluding Cost of pipe ) 100 mm dia S.W. Pipe Mtr 85.00 90.00
5.88
2 3.2
3.3.1
S-67
Description
Unit
Proposed Rate
Variation
150 mm dia S.W. Pipe 200 mm dia S.W. Pipe 230 mm dia S.W. Pipe 250 mm dia S.W. Pipe 300 mm dia S.W. Pipe 350 mm dia S.W. Pipe 400 mm dia S.W. Pipe Providing and fixing S.W. square mouth Gully trap 'A' grade (ISI Marked) of approved make & design in existing man-hole. Size 100 x 100 mm Size 150 x 100 mm Size 225 x 150 mm Providing and fixing Square Mouth Gully trap 'A' grade (IS : Marked) of approved make complete with C.I. grating, frame & cover masonry chamber in C.M. 1 : 6, 100 mm thick C.C. 1 : 5 : 10 base concrete, 40 mm thick C.C. M-15 grade coping, 12 mm thick cement plaster in CM 1 : 3 complete as per approved design & type. Trap Size 150 x 100 mm, 7.2 Kg. C.I. cover with frame Internal Chamber Size 300 x 300 mm.
3.5.1
Each
500.00
600.00
20.00
S-68
Description
Unit
Proposed Rate
Variation
3.5.2
Trap Size 225 x 150 mm, 15 Kg. C.I. cover with frame Internal Chamber Size 450 x 450 mm. Providing and fixing S.W. Master Trap (Inter cepting) 'A' grade (IS : 651 Marked) of approved quality / make. 100 mm dia 150 mm dia Labour Charges for Removing S.W. Pipes including breaking of joints & bed concrete stacking of useful material at site within 50 Mtr. lead and disposal of unserviceable material within 0.5 Km. lead. 100 & 150 mm dia pipe 200,230 & 250 mm dia pipe 300 mm dia pipe 350 mm dia pipe 400 mm dia pipe R.C.C. NON PRESSURE PIPES Providing, Laying and Jointing RCC Class NP-2 Non-pressure pipes (IS : 458 mark) of approved make with collars, jointed with C.M. 1 : 2 or having spigot and socket ends with flexible rubber rings joints including testing of joints etc. complete. 100 mm dia internal 150 mm dia internal 200 mm dia internal
Each
800.00
960.00
20.00
3.6
Each Each
205.00 280.00
205.00 280.00
0.00 0.00
3.8
S-69
Description
Unit
Proposed Rate
250 mm dia internal 300 mm dia internal 450 mm dia internal 500 mm dia internal 600 mm dia internal 700 mm dia internal
3.9
Providing and fixing Sand-Cast Iron (S.C.I.) Pipe (IS : 1729 mark) of approved make in wall or in floor with M.S. holder bat clamps in 10 x 10 x 10 Cm. M-15 grade concrete blocks, joints filled with CM 1 : 4 with spun yarn including cutting holes and making good the wall. 50 mm dia 75 mm dia 100 mm dia 150 mm dia Add extra for Lead Caulked joints (IS : 782-1978) in sand cast iron pipes / spun
Each
70.00
70.00
0.00
S-70
Description
Unit
Proposed Rate
3.10.2 100 mm dia 0.98 Kg pig lead 3.10.3 150 mm dia 1.48 Kg pig lead 3.11 Providing and fixing S.C.I. Fittings (IS : 1729 mark) in CM 1 : 4 with spun yarn.
Unit 3.11.1 3.11.2 3.11.3 3.11.4 3.11.5 3.11.6 3.11.7 3.11.8 50 mm w/o door 75 mm w/o door 100 mm w/o door 150 mm w/o door 50 mm with door 75 mm with door 100 mm with door 150 mm with door Each Each Each Each Each Each Each Each Offset -195.00 221.00 -----Socket 72.00 91.00 101.00 182.00 ----D/ door Cowel Y- tee -267.00 390.00 -----104.00 127.00 143.00 585.00 -----
Each Each
80.00 90.00
80.00 90.00
Bend 101.00
137.00 325.00 234.00 163.00 364.00 265.00 364.00 117.00 143.00 182.00 377.00 -----------
3.12
Providing and fixing Sand Cast Iron Floor Trap (Nahni) of (IS : 1729 mark) of approved quality / make with socket down or hinged grating including cutting and making good the floor. Each Each Each 225.00 180.00 170.00 262.00 197.00 170.00
16.44 9.44 0.00
3.12.1 Size 100 x 100 mm 3.12.2 Size 100 x 75 mm 3.12.3 Size 100 x 50 mm 3.13 Providing and fixing Sand Cast Iron 'P' or 'S' Trap (IS : 1729 Mark) of approved make.
Each
287.00
332.00
15.68
S-71
Description
Unit
Proposed Rate
Variation
3.14
Labour Charges for making connection of sewer line through main hole. Making connection with existing G.I. pipe lines of all sizes
Each
90.00
90.00
0.00
3.15
Each
60.00
60.00
0.00
Providing and fixing on wall face A.C. pipes (IS : 1626 part-I mark) of approved make with wooden plugs and M.S. clamps, jointing with spun yarn soaked in bitumen and C.M. 1 : 2 complete including making good the wall. 3.16.1 50 mm dia 3.16.2 75 mm dia 3.16.3 100 mm dia 3.16.4 150 mm dia Note :- Deduct 5% if M.S. clamps are not used in sand cast iron orA.C. pipes
3.16
S-72
Description
Unit
Proposed Rate
3.17
Providing and fixing A.C. fittings (IS : 1626 part-I mark) of approved quality / make with spun yarn soaked in bitumen & CM 1 : 2.
Dia Unit Each Each Each Each Cowel 21.00 25.00 30.00 40.00 Socket 9.00 10.00 11.00 15.00 Offset 25.00 30.00 42.00 43.00 Shoe 15.00 17.00 20.00 27.00 With Door Bend Tee 25.00 30.00 35.00 60.00 33.00 35.00 40.00 -Without door Bend Tee 21.00 24.00 26.00 40.00 25.00 26.00 35.00 55.00 Cowel 21.00 25.00 30.00 40.00 Socket 9.00 10.00 11.00 15.00 Offset 25.00 30.00 42.00 43.00 Shoe 15.00 17.00 20.00 27.00 With Door Bend Tee 25.00 30.00 35.00 60.00 33.00 35.00 40.00 -Without door Bend Tee 21.00 24.00 26.00 40.00 25.00 26.00 35.00 55.00
50 mm 75 mm 100 mm 150 mm
S-73
Description 2
Unit 3
% Variation A
Increase Decrease
% Variation B
Increase
10
3.18
Labour Charges for removing C.I./A.C. pipes of all sizes including accessories with care and stacking of useful material.
RIGID PVC SOIL, WASTE & RAIN WATER (SWR) PIPES
Mtr
5.00
5.00
0.00
3.19
Providing and fixing rigid PVC Pipe (IS : 4985 mark) Class II (4 Kg./Cm2) approved quality / make including jointing the pipe with solvent cement rubber ring and lubricant. Mtr Mtr Mtr Mtr 75.00 90.00 140.00 180.00 80.00 95.00 150.00 190.00
6.67 5.56 7.14 5.56
3.19.1 63 mm dia 3.19.2 75 mm dia 3.19.3 110 mm dia 3.19.4 160 mm dia 3.20 Providing and fixing rigid PVC Pipe fittings (IS : 4985 mark) of approved quality / make including jointing the pipe with solvent cement rubber ring and lubricant.
75 mm dia
110 mm dia
75 mm dia
110 mm dia
3.20.1 Coupler (Socket) 3.20.2 Reducer 110 x 75 mm 3.20.3 Plain Tee 3.20.4 Door Tee
S-74
Description 2
Unit 3
% Variation A
Increase Decrease
% Variation B
Increase
5 105.00 110.00 130.00 45.00 56.00 75.00 90.00 25.00 38.00 25.00 15.00 -----130.00 175.00 220.00 200.00 90.00 87.00 110.00 31.00 45.00 35.00 20.00 120.00 125.00 130.00 150.00 120.00
10
3.20.5 Door 'Y' 3.20.6 Double 'Y' 3.20.7 Double Door 'Y' 3.20.8 Bend 45 3.20.9 Bend 87.5 3.20.10 Door Bend (Top Side) 3.20.11 Door Bend (Left & Right ) 3.20.12 Vent Cowel 3.20.13 Socket Plug 3.20.14 Door Cap 3.20.15 Pipe Clip 3.20.16 W.C. Connector with lipring 3.20.17 W.C. Connector bent type 3.20.18 Plain floor trap 3.20.19 Multi Floor Trap 3.20.20 Height Raiser
Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each
105.00 110.00 130.00 45.00 56.00 75.00 90.00 25.00 38.00 25.00 15.00 ------
130.00 175.00 220.00 200.00 90.00 87.00 110.00 31.00 45.00 35.00 20.00 120.00 125.00 130.00 150.00 120.00
0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
S-75
Description 2
Unit 3
% Variation A
Increase Decrease
% Variation B
Increase
10
3.20.21 Top Tile & Straine 3.20.22 Top Tile Only 3.20.23 P Trap 3.20.24 Q- Trap 3.20.25 S- Trap 3.20.26 Ring Fitting 3.20.27 Gully Trap 3.21 Construction of Manhole in all types of soil inner size 90 x 60 Cm thick masonry in CM 1 : 6, 10 cm. thick cement concrete 1 : 5 : 10 in foundation, 20 mm thick inside plaster in CM 1 : 6, finished with floating neat cement, 50 mm thick M-15 grade C.C. flooring, making channels, 80 mm. thick stone slab covering with 40 mm thick M-15 grade C. C. flooring, 25 Kg. CI cover with frame of 450 mm dia earthwork etc. complete as per design including disposal of surplus earth within 50 Mtr. Lead.
--------
3.21.1 Depth upto 0.5 M Each 3.21.2 Add extra over item 3.21.1 for every additional 0.10 m depth above 0.5 m depth 1500.00 1800.00
20.00
Each
100.00
120.00
20.00
S-76
Description 2
Unit 3
% Variation A
Increase Decrease
% Variation B
Increase
10
3.22
Construction of Manhole in all types of soil inner size 1.5 x 1.2 M. with 450 mm thick masonry in CM 1 : 6, 10 cm. thick cement concrete 1 : 5 : 10 in foundation, 20 mm thick inside plaster in CM 1 : 6, finished with floating neat cement, 50 mm thick M15 grade C.C. flooring, making channels, 80 mm. thick stone and covering with 40 mm thick M-15 grade C.C. flooring, 38 Kg. CI cover with frame of 450 mm dia earthwork etc. complete including disposal of surplus earth within 50 Mtr. lead as per design. Each 6100.00 7320.00
20.00
3.22.1 Depth upto 1.5 M 3.22.2 Add extra over item 3.22.1 for every additional 0.10 m depth above 1.5 m depth 3.23 Construction of Chamber in all types of soil with 300 mm thick masnory in CM. 1 : 6, 100 mm thick C.C. 1 : 5 : 10 in foundation , 20 mm thick inside plaster in Cm 1 : 6, finished with floating neat cement 50 mm thick M-15 grade C.C. flooring earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 Mtr.
Each
280.00
336.00
20.00
3.23.1 Inside size 300 x 300 mm & depth upto 0.5 M & 5 Kg CI cover with frame 3.23.2 Inside size 450 x 450 mm depth upto 0.5 M & 15 Kg CI cover with frame
Each
300.00
360.00
20.00
Each
630.00
756.00
20.00
S-77
Description 2
Unit 3
% Variation A
Increase Decrease
% Variation B
Increase
5 960.00 1224.00
10
3.23.3 Inside size 600 x 450 mm upto depth of 1.5 M & 38 Kg CI cover with frame 3.23.4 --do-- depth upto 0.5 M to 1.0 M --do-3.24 Construction of Soakage well in all types of soil 300mm thick dry stone masonry, top and bottom 300 mm course in CM 1 : 6, 80 mm thick stone slab, jointing of slab in CM 1 : 3, Ralthal, Kharanja, 40 mm thick M-15 grade C.C. flooring earthwork complete as per approved drawing including disposal of earth within a lead of 50 Mtr.
Each Each
800.00 1020.00
20.00 20.00
3.24.1 Size 300 cm dia outside & 300 cm depth 3.24.2 Size 300 cm dia outside & 240 cm depth 3.24.3 Size 240 cm dia outside & 240 cm depth 3.25 Construction of Soakage Trench in all types of soil of with 300mm thick dry stone masonry, 80 mm thick stone slab covering jointing of slab in CM 1 : 3, Ralthal, Kharanja, 40 mm thick M-15 grade C.C. flooring earthwork etc. complete as per approved drawing including disposal of earth within a lead of 50 Mtr.
3.25.1 Top Width 180 cm , bottom width 90 cm & depth 240 cm 3.25.2 --do-- 240 cm , --do--150 cm & depth 300 cm
Mtr Mtr
1600.00 2700.00
1920.00 3240.00
20.00 20.00
S-78
Description 2
Unit 3
% Variation A
Increase Decrease
% Variation B
Increase
10
3.26
Construction of Soakage well in all types of soil of approved drawing top dia 90 Cm. portion in 450 mm thick masonry with CM 1 : 6, 80mm thick stone slab covering jointing of slab in CM 1 : 3, Ralthal, Kharanja, 40 mm thick M-15 grade C.C. flooring earthwork etc. complete including disposal of surplus earth within a lead of 50 Mtr.
3.26.1 Inner Dia 90 cm & 10 to 12 Mtr deep 3.26.2 Inner Dia 60 cm & 10 to 12 Mtr deep 3.27 Labour Charges for construction of Soakage well of 90 Cm. dia (Earth work & its disposal, within a lead of 0.5 Km. only). Add extra if Soakage Well is filled with dry stones Construction of Septic Tank in all types of soil with 40 Cm. thick masonry in CM 1 : 6, 15 Cm. thick C.C. bed of 1 : 5 : 10, M-15 grade C.C. flooring & over stone slab covering, 80 mm thick slab, jointing of slab in CM 1 : 3 Ralthal, Kharanja, 50 mm thick stone partition walls, 20 mm thick plaster in CM 1 : 6 finished with neat floating cement, 4 Nos C.I. foot rests of approved design, two No. 450 mm dia 25 Kg. of each C.I. cover with frame, earth work etc. complete as per approved drawing including disposal of surplus earth within a lead of 50 Mtr.
Each Each
1500.00 1400.00
1500.00 1400.00
0.00 0.00
Mtr Cum
45.00 180.00
45.00 180.00
0.00 0.00
3.28 3.29
S-79
Description 2
Unit 3
% Variation A
Increase Decrease
% Variation B
Increase
10
3.29.1 Size 200 x 100 x 130 cm (for 10 users) 3.29.2 Size 230 x 110 x 150 cm (for 20 users) 3.29.3 Size 400 x 140 x 150 cm (for 50 users) Note :- Add or substract proportinally for every 0.5 M increase or decrease in length - 12.5 % Breadth & Depth - 18 % each 3.30 Emptying of Septic tank, Soakage well etc. by disposing or sludge upto 50 M lead & taking out sewage including cleaning of site. Add extra if RCC Slab of designed thickness & reinforcement is provided on manholes in place of stone slab (Actul area of RCC Slab to be measured). Providing and fixing M.S. Foot Rests in with CM 1 : 3, standard design in 20 mm square M.S. bar 50 mm embedded in wall & 10 cms. projected out Supplying and fixing C.I. Cover with frame, C.I. gratings for chambers & man holes. Supplying and fixing Ferro-cement cover with C.I. frame for chambers & man holes of size.
Cum
120.00
120.00
0.00
3.31
Sqm
130.00
130.00
0.00
3.32
Each
100.00
100.00
0.00
3.33
Kg
14.50
17.00
17.24
3.34
3.34.1 450 mm dia, 5 Kg. C.I. frame to with stand 3 MT centre point load & minimum unfractured load of 1 MT (Light duty).
Each
500.00
600.00
20.00
S-80
Description 2
Unit 3
% Variation A
Increase Decrease
% Variation B
Increase
5 937.00
10
3.34.2 500 mm dia, 12 Kg. C.I. frame to with stand 15 MT centre point load (Heavy duty). 3.34.3 500 mm dia, 22 Kg. C.I. frame to with stand 22 MT centre point load ( Medium duty). 3.34.4 500 mm dia, 25 Kg. C.I. frame to with stand 70 MT centre point load seal type (Heavy duty). 3.34.5 Rectangular Shape 600 x 450 mm to withstand 3 MT center point load & minimum unfractured load of 1 MT (Light duty ) Supplying and fixing R.C.C. Manhole covers with frame of approved make (Light duty). 3.35.1 Size 500 mm dia (Double Seal) 3.35.2 Size 450 mm dia 3.35.3 Size 400 mm dia 3.35.4 Size 600 x 600 mm (Double Seal) 3.35.5 Size 600 x 450 mm 3.35.6 Size 450 x 450 mm 3.35.7 Size 300 x 300 mm 3.35.8 Size 250 x 250 mm 3.35.9 Size 180 x 180 mm 3.35
Each
900.00
4.11
Each
1250.00
1254.00
0.32
Each
1600.00
1920.00
20.00
Each
690.00
725.00
5.07
S-81
Description 2
Unit 3
% Variation A
Increase Decrease
% Variation B
Increase
10
3.36
Construction of Open Surface Drain with 112 mm thick brick masonry in CM 1 : 4, 110 mm thick base concrete 1 : 5 : 10, 37 mm thick M-15 grade C.C. flooring, 12 mm 1 : 4 cement plaster on all exposed faces of walls including top surface excavation & disposal of earth complete as per approved design /
drawings. 3.36.1 112 mm drain, 225 mm Av. Depth 3.36.2 150 mm drain, 225 mm Av. Depth 3.36.3 250 mm drain, 300 mm Av. Depth Construction of Open Drain with 112 mm thick brick masonry in CM 1 : 4, Semi circular S.W. glazed channel (confirming to IS Standards) fixed with cement mortar 1 : 1 over a bed of 100 mm thick C.C. 1 : 5 : 10, filling of edges with M-15 grade C.C. flooring, 12 mm cement Plaster 1 : 4, over all exposed surfaces, excavation & disposal of earth with in a lead of 50 Mtr. complete as per approved drawings. 3.37.1 112 mm drain, 225 mm Av. Depth width 10 cm & S.W. glazed channel 3.37.2 150 mm drain, 225 m av. Depth width 15 cm & S.W. glazed channel 3.37
Mtr
175.00
210.00
20.00
Mtr
215.00
255.00
18.60
S-82
Description 2
Unit 3
% Variation A
Increase Decrease
% Variation B
Increase
5 420.00
10
3.37.3 250 mm drain, 225 mm av. Depth width 250 cm S.W.glazed channel 3.38 3.39 Extra for additional 5 Cm. average depth of drain of all sizes. Providing and fixing precast dense cement concrete (Vibro-pressed) drain section Block of different Size as per drawing and design and Strength as per IS Code 2185 Part-I of Grade 'D' (5.00 mm2) proper quality of additive / admixture like plasticizer etc. added to produce high quality and durable drain section Blocks of 'L' Shape 'U' Shape etc. as per approved design and drawing complete with fixing and jointing in CM 1 : 4 in proper grade and level complete in all respect including earth work and disposal of surplus earth within 0.5 Km. lead. (Cost of Steel / welded mesh etc. shall be paid extra).
Mtr
350.00
20.00
Mtr
20.00
24.00
20.00
3.39.1 40 mm thick 3.39.2 Upto 60 mm thick 3.39.3 Upto 80 mm thick 3.40 Construction of Cement Concrete Chamber with 125 mm dia.
3.40.1 C.P. Brass Grating 3.40.2 C.P. Brass doom Grating 3.40.3 C.I. Grating
S-83
Description 2
Unit 3
% Variation A
Increase Decrease
% Variation B
Increase
3.40.4 Stainless steel sheet grating 3.40.A Construction of Cement Concrete Chamber 125 mm dia on depressed floor upto 45 cm. height from floor with. 3.40.A1 C.P. Brass Grating 3.40.A2 C.P. doom Grating 3.40.A3 C.I. Grating 3.40.A4 Stainless steel sheet grating
SPUN- CENTRIFUGAL CAST IRON SOIL WATER & RAIN WATER PIPES
Each
80.00
5 80.00
10
0.00
Providing and fixing Spun-Centrifugally Cast Iron Pipes (IS : 3989 Mark) of Approved make in wall or in floor with M.S. Holder bat clamps in 10 x 10 x 10 cm. M-15 Grade concrete blocks, joints filled with CM 1 : 4 with spun yarn including cutting holes and making good the wall. 3.41.1 75 mm dia 3.41.2 100 mm dia 3.41.3 150 mm dia 3.42 Providing and fixing Spun-Centrifugally Cast Iron pipe (IS : 3989 Mark) in CM 1 : 4 with Spun Yarn.
Unit 3.42.1 3.42.2 3.42.3 75 mm w/o door 100 mm w/o door 100 mm w/o door Each Each Each offset 330 374 -Socket 143 215 382 D/Door Y- Tee 400 500 1350 Bend 209 294 671
3.41
S-84
Description 2
75 mm with door 100 mm with door 150 mm w/o door Each Each Each ---------242 308 682
Unit 3
230 683 999
% Variation A
Increase Decrease
% Variation B
Increase
1
3.42.4 3.42.5 3.42.6
10
Providing and fixing Spun-Cast Iron floor trap(Nahni) of (IS : 3989 Mark) approved quality / make with socket down or hinged grating including cutting and making good the floor. 3.43.1 Size 100 x 100 mm 3.43.2 Size 100 x 75 mm 3.44 Add 10% extra over Item No. 3.41 if the pies are laid under suspended condition under the roof. Providing and fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes Type B for sciland waste discharge system (IS : 13592 : 1992 Marked) of approved quality / make 3.45.1 75 mm dia 3.45.2 110 mm dia 3.46 Providing and fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings Type B for sciland waste discharge system (IS : 13592 : 1992 Marked) of approved quality / make.
75 mm dia
3.43
450.00 425.00
450.00 425.00
0.00 0.00
3.45
Mtr Mtr
100.00 200.00
100.00 200.00
0.00 0.00
110 mm dia
75 mm dia
110 mm dia
Each Each
41.00 44.00
62.00 71.00
41.00 44.00
62.00 71.00
0.00 0.00
S-85
Description 2
Unit 3
% Variation A
Increase Decrease
% Variation B
Increase
5 42.00 54.00 45.00 71.00 83.00 107.00 113.00 171.00 35.00 11.00 192.00 --68.00 78.00 122.00 73.00 89.00 76.00 111.00 159.00 199.00 203.00 262.00 44.00 17.00 328.00 124.00 130.00 121.00 139.00 211.00
10
3.46.3 Single push fit coupler 3.46.4 Bend 87.5 degree 3.46.5 Bend 45 Degree 3.46.6 Door Bend 87.5 Dg 3.46.7 Single 'Y' 3.46.8 Single 'Y' with door 3.46.9 Double 'Y' 3.46.10 Double 'Y' with door 3.46.11 Socket Plug 3.46.12 Pipe Clip 3.46.13 Double tee with door 3.46.14 W.C. connector 3.46.15 W.C. connector (Bend) with ring 3.46.16 Single Tee 3.46.17 Single Tee with door 3.46.18 Double Tee (4 Ways)
Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each
42.00 54.00 45.00 71.00 83.00 107.00 113.00 171.00 35.00 11.00 192.00 --68.00 78.00 122.00
73.00 89.00 76.00 111.00 159.00 199.00 203.00 262.00 44.00 17.00 328.00 124.00 130.00 121.00 139.00 211.00
0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
S-86
Description 2
Unit 3
% Variation A
Increase Decrease
% Variation B
Increase
5 ----8.00 -------138.00 162.00 22.00 15.00 10.00 393.00 98.00 86.00 87.00 77.00 28.00 34.00
10
3.46.19 Multi floor trap 3.46.20 Offset 3.46.21 Extra square Jali 3.46.22 Extra Round Jali 3.46.23 Extra 4 SWR Ring 3.46.24 Gully Trap 160 mm 3.46.25 Nahni Trap with Jali 4 " 3.46.26 Nahni Trap without Jali 4 " 3.46.27 Nahni Trap with Jali 3 " 3.46.28 Nahni Trap without Jali 3.46.29 Vent Cowel 75 mm 3.46.30 Vent Cowel 100 mm 3.47 Raising manhole cover and frames slab to required level including dismentalling existing slab and making good the damage as required (raising depth of manhole masonry to be paid separately)
Each Each Each Each Each Each Each Each Each Each Each Each
----8.00 --------
138.00 162.00 22.00 15.00 10.00 393.00 98.00 86.00 87.00 77.00 28.00 34.00
0.00
Each
485.00
500.00
3.09
S-87
Description 2
Unit 3
% Variation A
Increase Decrease
% Variation B
Increase
Each
757.00
5 765.00
10
1.06
S-88
Description 2
Unit 3
% Variation
Increase 7 Decrease 8
3.42
Providing and fixing Spun-Centrifugally Cast Iron pipe (IS : 3989 Mark) in CM 1 : 4 with Spun Yarn.
Unit offset 330 374 ----Socket 143 215 382 ---D/Door Y- Tee 400 500 1350 ---Bend 209 294 671 242 308 682 Door cross 506 663 990 230 683 999 Cowel 200 335 575 ---Tee 365 452 901 401 482 991
75 mm w/o door 100 mm w/o door 100 mm w/o door 75 mm with door 100 mm with door 150 mm w/o door
Providing and fixing Spun-Cast Iron floor trap(Nahni) of (IS : 3989 Mark) approved quality / make with socket down or hinged grating including cutting and making good the floor. 3.43.1 Size 100 x 100 mm 3.43.2 Size 100 x 75 mm 3.44 Add 10% extra over Item No. 3.41 if the pies are laid under suspended condition under the roof.
3.43
450.00 425.00
450.00 425.00
0.00 0.00
S-89
Description 2
Unit 3
% Variation
Increase 7 Decrease 8
3.45
Providing and fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes Type B for sciland waste discharge system (IS : 13592 : 1992 Marked)
of approved quality / make 3.45.1 75 mm dia 3.45.2 110 mm dia 3.46 Providing and fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings Type B for sciland waste discharge system (IS : 13592 : 1992 Marked) of approved quality / make.
Mtr Mtr
100.00 200.00
100.00 200.00
0.00 0.00
75 mm dia
110 mm dia
3.46.1 Coupler 3.46.2 Repair coupler 3.46.3 Single push fit coupler 3.46.4 Bend 87.5 degree 3.46.5 Bend 45 Degree 3.46.6 Door Bend 87.5 Dg 3.46.7 Single 'Y' 3.46.8 Single 'Y' with door
S-90
Description 2
Unit 3
% Variation
Increase 7 Decrease 8
3.46.9 Double 'Y' 3.46.10 Double 'Y' with door 3.46.11 Socket Plug 3.46.12 Pipe Clip 3.46.13 Double tee with door 3.46.14 W.C. connector 3.46.15 W.C. connector (Bend) with ring 3.46.16 Single Tee 3.46.17 Single Tee with door 3.46.18 Double Tee (4 Ways) 3.46.19 Multi floor trap 3.46.20 Offset 3.46.21 Extra square Jali 3.46.22 Extra Round Jali
Each Each Each Each Each Each Each Each Each Each Each Each Each Each
203.00 262.00 44.00 17.00 328.00 124.00 130.00 121.00 139.00 211.00 138.00 162.00 22.00 15.00
6 203.00 262.00 44.00 17.00 328.00 124.00 130.00 121.00 139.00 211.00 138.00 162.00 22.00 15.00
S-91
Description 2
Unit 3
% Variation
Increase 7 Decrease 8
3.46.23 Extra 4 SWR Ring 3.46.24 Gully Trap 160 mm 3.46.25 Nahni Trap with Jali 4 " 3.46.26 Nahni Trap without Jali 4 " 3.46.27 Nahni Trap with Jali 3 " 3.46.28 Nahni Trap without Jali 3.46.29 Vent Cowel 75 mm 3.46.30 Vent Cowel 100 mm 3.47 Raising manhole cover and frames slab to required level including dismentalling existing slab and making good the damage as required (raising depth of manhole masonry to be paid separately)
8.00 --------
5 8.00 --------
0.00
Each Each
485.00 757.00
500.00 765.00
3.09 1.06
S-711
CHAPTER S-4
TUBE WELL
Chapter Code No. 1 4.1
% Variation
Description 2 Construction of tube well from ground level and upto 100 Metre depth and above sizes in all types of soils in alluvium strata by "bailing" method and without gravel packing as per IS : 2800 (Part-I & II) 1979 specifications (The work includes formation of cavity well at bottom by development with appropriate air compressor or bailer pumping and also lowering of casing pipe but excluding cost of the casing pipe. The tube well should have a throughout bore as per nominal bore of casing pipe. The work would be completed after obtaining sand free water.). 100 mm dia nominal bore 125 mm dia nominal bore 150 mm dia nominal bore
Unit 3
Rate (Rs) 4
Proposed Rate 5
Increase 0 Decrease 7
S-721
% Variation
Description 2 Construction of tube well 100 Metre depth and above in all type of rocks by DTH system and over burden, to accommodate casing pipe of following size in all types of soils and over-burden including lowering of casing pipes, but excluding cost of casing pipes as per IS : 2800 (Part-I & II) 1979 specifications. The work would be completed after obtaining sand free water. The tube-well should have a throughout bore as per nominal dia of casing pipe. 100 mm dia nominal bore 125 mm dia nominal bore 150 mm dia nominal bore 200 mm dia nominal bore Construction of tube well from ground levels and upto 100 Meter depth and above to accommodate housing and assembly pipe of following size in all types of alluvium strata by percussion / rotary drilling method and with
Unit 3
Rate (Rs) 4
Proposed Rate 5
Increase 0 Decrease 7
S-731
% Variation
Description 2 gravel as per IS : 4097-1967 and packing as per IS : 2800 (Part- I & II) 1979 as amended upto date (the work includes the cost of gravel & Its primary packing and packing during development, lowering of housing & strainer assembly pipes, with supply and wrapping of coir rope, wherever necessary, for arresting fine sand particles. The work will not include cost of housing pipe and strainer pipe assembly and development work, but work would be completed after obtaining sand free water. 150 mm dia nominal bore 200 mm dia nominal bore 250 mm dia nominal bore Development of tube well as per IS specifications using suitable compressor to give sand free water for required yield of the gravel packed tube well. Supply of ERW M.S. black casing pipe ISI marked (IS : 4270/1992) of grade Fe 410 of following sizes at site of work.
Nominal bore Out side dia of of pipe (mm) pipe (mm) Thickness of pipe (mm) Mass of Plane tube (Kg/m)
Unit 3
Rate (Rs) 4
Proposed Rate 5
Increase 0 Decrease 7
Hr
450.00
450.00
0.00
4.5
Unit
Rate (Rs)
Rate (Rs)
S-741
% Variation
Description 2
114.3 141.3 168.3 219 273 5.00 5.00 5.00 5.40 7.10 13.48 16.80 20.13 28.46 46.57
Unit 3
Mtr Mtr Mtr Mtr Mtr
Rate (Rs) 4
490.00 630.00 850.00 1250.00 1400.00
Proposed Rate 5
Increase 0 Decrease 7
4.6
Supply of strainer pipes made of ERW M.S. black pipe ISI Marked of following size at the site of work including required size of slotting as per IS : 8110-1985. 150 mm dia nominal bore 200 mm dia nominal bore 250 mm dia nominal bore Testing verticality of tube-well by plumbing system and yield test and draw down test by pumping system as per IS : 2800 (Part -II) - 1979. Supply & fixing tube well cover of M.S. Sheet (6 mm thick) with nuts and bolts complete for casing size.
Mtr. Mtr. Mtr. 950.00 1300.00 1800.00 950.00 1300.00 1800.00
0.00 0.00 0.00
Each
6300.00
6300.00
0.00
4.8
S-751
Chapter Code No. 1 4.8.1 4.8.2 4.8.3 4.8.4 4.8.5 4.9 100 mm dia 125 mm dia 150 mm dia 200 mm dia 250 mm dia
% Variation
Description 2
Unit 3
Each Each Each Each Each
Rate (Rs) 4
140.00 170.00 210.00 280.00 300.00
Proposed Rate 5
Increase 0 Decrease 7
Supply & fixing M.S. clamp, set of 50 x 6 mm flat from iron with nuts and bolts etc. for holding the riser pipe assembly of submersible pump set. Supply of 50 mm dia G.I. medium class pipe (each length 5.8 m to 6.0 m) tripod as per drawing and design with chain pulley of 3 Mtr capacity . Installation of submersible motor pump set in Tube-well / open well complete (labour charges only) including transportation of tripod, chain pulley block & any other material required for lowering purpose.
Each
200.00
200.00
0.00
4.10
Each
9000.00
9000.00
0.00
4.11
Each
2800.00
2800.00
0.00
S-761
% Variation
Description 2 Providing and fixing 60 cm. wide M.S. Ladder in open well made of flat iron 32 x5 mm and 10 mm dia bars @ 200 mm c/c with angle iron hold fasts at suitable interval complete as per drawing Installation of India mark II hand pump set, complete on existing plate form. Construction of 185 cm. dia platform as per approved design and drawing of UNICEF. Supplying of India mark II hand pump set complete ISI Marked with cylinder and ten connecting rods etc. ISI. Supplying and Installation of 32 mm dia G.I. pipe medium class ISI marked in 3 m. length including all accessories and fittings required for installation of hand pump.
Unit 3
Rate (Rs) 4
Proposed Rate 5
Increase 0 Decrease 7
Mtr
170.00
170.00
0.00
4.13.1
Each
700.00
700.00
0.00
4.13.2
Each
2200.00
2200.00
0.00
4.14
Each
6500.00
6500.00
0.00
4.15
Mtr
140.00
175.00
20.00
S-771
% Variation
Description 2 Supplying and Installation of submersible pumping motor pump sets ISI Marked (IS : 8304-1989) of approved make like K.S.B., KIRLOSKAR, CALAMA etc. or equivalent, making connection suitable for T.W. / D.C.B. / Open well. The job includes screwing and welding of flanges on G.I. riser pipes, installation of complete fitting and assessories, with riser pipes, jointing of electrical cables and other connections making switch board electrical connections, all labour for testing of submersible pump set and supply of water to water mains, complete in all respect.(Refer Electrical BSR) For item of earthing refer to Electrical BSR For item of submersible cable refer to Electrical BSR Item of panel board if required shall be as per design and specification approved by the Engineer In charge as per the requirement. Providing and lowering of G.I. Pipes, flange pipe including rubber washer and nuts of 8 mm dia complete in all respect ISI Make.
Unit 3
Rate (Rs) 4
Proposed Rate 5
Increase 0 Decrease 7
4.20
4.20.1 4.20.2
R. Mtr R. Mtr
170.00 280.00
205.00 350.00
17.07 20.00
S-781
% Variation
Unit 3
R. Mtr
Rate (Rs) 4
440.00
Proposed Rate 5
Increase 0 Decrease 7
540.00
18.52
Unlowering of submersible pump set with all piping from a tube well / open well complete (Labour charge only ) including transportation of tripod, chain, pulley block and other materials required and lowering of repaired/ new pump in the tube well/ open well complete in all respect Each Job
3500.00
3500.00
0.00