Professional Documents
Culture Documents
42CrMo4IM / 42CrMoS4IM
An improved machining, inclusion modified medium carbon alloy through hardening steel.
Features
Calcium treated steel for Inclusion modification Contains soft, deformable calcium aluminates encapsulated in manganese sulphide rather than hard alumina oxide inclusions Controlled analysis for consistent response to heat treatment, repeatable strength and fatigue properties Grain size 5 or finer Up to 30% longer tool life for a given cutting speed Up to 20% higher cutting speeds for a given tool life Compared with the standard grade the IM steel gives: Improved machinability with reduced machining cost
Benefits
The modified inclusions are less abrasive to cutting tools, acting as a lubricant and barrier at the tool / workpiece interface.
Related specifications
EN 10083-1
Technical Service
Please contact our Customer Technical Service Department for further information or assistance in the
Guaranteed Machinability
42CrMoS4 IM steel, in the hardened and tempered condition with a tensile strength of 900N/mm2 minimum, will give a V15 test speed > 150m/min using P10 uncoated carbide tools to ISO3685 condition C.
use of IM steels.
42CrMo4IM / 42CrMoS4IM
Mechanical properties (Hardened and Tempered)
Bar Size (dia) mm Proof Stress Re N/mm min
2
Elongation A5 % min
11 12 13 14
45 50 50 55
35 35 35 35
600 500 Machinability V15 m/min 300 200 100 0 100 150 200 250 300 Hardness HV IM Standard 350 400 400
www.corusgroup.com
Care has been taken to ensure that this information is accurate, but Corus Group plc, including its subsidiaries, does not accept responsibility or liability for errors or information which is found to be misleading. Copyright 2003 Corus
Corus Engineering Steels PO Box 50 Aldwarke Lane Rotherham S60 1DW United Kingdom T +44 (0) 1709 371234 F +44 (0) 1709 826233 www.corusengineeringsteels.com