Professional Documents
Culture Documents
May 2006
Description
The KA78XXE/KA78XXAE series of three-terminal positive regulator are available in the TO-220/D-PAK package and with several xed output voltages, making them useful in a wide range of applications. Each type employs internal current limiting, thermal shut down and safe operating area protection, making it essentially indestructible. If adequate heat sinking is provided, they can deliver over 1A output current. Although designed primarily as xed voltage regulators, these devices can be used with external components to obtain adjustable voltages and currents.
Ordering Information
Part Number
KA7805E / KA7806E KA7808E / KA7809E KA7810E KA7812E / KA7815E KA7818E / KA7824E KA7805AE / KA7806AE KA7808AE / KA7809AE KA7810AE KA7812AE/KA7815AE KA7818AE/KA7824AE KA7805ER / KA7806ER KA7808ER / KA7809ER KA7812ER 4% D-PAK 2%
Package
TO-220
Operating Temperature
0 to +125C
www.fairchildsemi.com
Block Diagram
Input 1 Current Generator SOA Protection Series Pass Element Output 3
Starting Circuit
Reference Voltage
Error Amplifier
Figure 1.
Pin Assignment
TO-220
GND GND
D-PAK
Figure 2.
Parameter
VO = 5V to 18V VO = 24V Thermal Resistance Junction-Cases (TO-220) Thermal Resistance Junction-Air (TO-220) Operating Temperature Range (KA78XXE/AE/ER) Storage Temperature Range
Value
35 40 5 65 0 to +125 -65 to +150
Unit
V C/W C/W C C
www.fairchildsemi.com
KA7805E/ER Symbol
VO
Parameter
Output Voltage TJ = +25C
Conditions
5.0mA IO 1.0A, PO 15W VI = 7V to 20V
Min.
4.8 4.75 62
Typ. Max.
5.0 5.0 4.0 1.6 9 4 5.0 0.03 0.3 -0.8 42 73 2 15 230 2.2 5.2 5.25 100 50 100 50 8.0 0.5 1.3
Unit
V
Regline
mV
Regload
Load
mV
mA mA mV/C V/VO dB V m mA A
IO = 5mA to 1.0A VI = 7V to 25V IO = 5mA f = 10Hz to 100kHz, TA = +25C f = 120Hz, VO = 8V to 18V IO = 1A, TJ = +25C f = 1kHz VI = 35V, TA = +25C TJ = +25C
Output Voltage
Notes: 1. Load and line regulation are specied at constant junction temperature. Changes in Vo due to heating effects must be taken into account separately. Pulse testing with low duty is used. 2. These parameters, although guaranteed, are not 100% tested in production.
www.fairchildsemi.com
KA7806E/ER Symbol
VO
Parameter
Output Voltage TJ = +25C
Conditions
5.0mA IO 1.0A, PO 15W VI = 8.0V to 21V
Unit
V
Regline
mV
Regload
Load
mV
mA mA mV/C V/Vo dB V m mA A
IO = 5mA to 1A VI = 8V to 25V IO = 5mA f = 10Hz to 100kHz, TA = +25C f = 120Hz VI = 9V to 19V IO = 1A, TJ = +25C f = 1kHz VI = 35V, TA = +25C TJ = +25C
Output Voltage
Notes: 3. Load and line regulation are specied at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with low duty is used. 4. These parameters, although guaranteed, are not 100% tested in production.
www.fairchildsemi.com
Electrical Characteristics (KA7808E/KA7808ER) (Continued) Refer to test circuit, 0C < TJ < 125C, IO = 500mA, VI = 14V, CI = 0.33F, CO = 0.1F, unless otherwise specied.
KA7808E/ER Symbol
VO
Parameter
Output Voltage TJ = +25C
Conditions
5.0mA IO 1.0A, PO 15W VI = 10.5V to 23V
Min.
7.7 7.6 56
Typ.
8.0 8.0 5.0 2.0 10 5.0 5.0 0.05 0.5 -0.8 52 73 2 17 230 2.2
Max.
8.3 8.4 160 80 160 80 8.0 0.5 1.0
Unit
V
Regline
mV
Regload
Load
mV
mA mA mV/C V/Vo dB V m mA A
Current IO = 5mA to 1.0A VI = 10.5A to 25V Drift(6) IO = 5mA f = 10Hz to 100kHz, TA = +25C f = 120Hz, VI = 11.5V to 21.5V IO = 1A, TJ = +25C f = 1kHz VI = 35V, TA = +25C TJ = +25C
Notes: 5. Load and line regulation are specied at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with low duty is used. 6. These parameters, although guaranteed, are not 100% tested in production.
www.fairchildsemi.com
Electrical Characteristics (KA7809E/KA7809ER) (Continued) Refer to test circuit, 0C < TJ < 125C, IO = 500mA, VI = 15V, CI = 0.33F, CO = 0.1F, unless otherwise specied.
KA7809E/ER Symbol
VO
Parameter
Output Voltage TJ = +25C
Conditions
5.0mA IO 1.0A, PO 15W VI = 11.5V to 24V
Min.
8.65 8.6 56
Typ.
9 9 6 2 12 4 5.0 -1 58 71 2 17 250 2.2
Max.
9.35 9.4 180 90 180 90 8.0 0.5 1.3
Unit
V
Regline
mV
Regload
Load
mV
mA mA mV/C V/Vo dB V m mA A
IO = 5mA to 1.0A VI = 11.5V to 26V IO = 5mA f = 10Hz to 100kHz, TA = +25C f = 120Hz VI = 13V to 23V IO = 1A, TJ = +25C f = 1kHz VI = 35V, TA = +25C TJ = +25C
Output Voltage
Notes: 7. Load and line regulation are specied at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with low duty is used. 8. These parameters, although guaranteed, are not 100% tested in production.
www.fairchildsemi.com
Electrical Characteristics (KA7810E) (Continued) Refer to test circuit, 0C < TJ < 125C, IO = 500mA, VI = 16V, CI = 0.33F, CO = 0.1F, unless otherwise specied.
KA7810E Symbol
VO
Parameter
Output Voltage TJ = +25C
Conditions
5mA IO 1A, PO 15W VI = 12.5V to 25V
Min.
9.6 9.5 56.0
Typ.
10.0 10.0 10.0 3.0 12.0 4.0 5.1 -1.0 58.0 71.0 2.0 17.0 250 2.2
Max.
10.4 10.5 200 100 200 400 8.0 0.5 1.0
Unit
V
Regline
mV
Regload
Load
mV
mA mA mV/C V/Vo dB V m mA A
IO = 5mA to 1A VI = 12.5V to 29V IO = 5mA f = 10Hz to 100kHz, TA = +25C f = 120Hz VO = 13V to 23V IO = 1A, TJ = +25C f = 1kHz VI = 35V, TA = +25C TJ = +25C
Output Voltage
Notes: 9. Load and line regulation are specied at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with low duty is used. 10. These parameters, although guaranteed, are not 100% tested in production.
www.fairchildsemi.com
Electrical Characteristics (KA7812E/KA7812ER) (Continued) Refer to test circuit, 0C < TJ < 125C, IO = 500mA, VI = 19V, CI = 0.33F, CO = 0.1F, unless otherwise specied.
KA7812E/ER Symbol
VO
Parameter
Output Voltage TJ = +25C
Conditions
5.0mA IO 1.0A, PO 15W VI = 14.5V to 27V
Min.
11.5 11.4 55
Typ.
12 12 10 3.0 11 5.0 5.1 0.1 0.5 -1 76 71 2 18 230 2.2
Max.
12.5 12.6 240 120 240 120 8.0 0.5 1.0
Unit
V
Regline
mV
Regload
Load
mV
mA mA mV/C V/Vo dB V m mA A
IO = 5mA to 1.0A VI = 14.5V to 30V IO = 5mA f = 10Hz to 100kHz, TA = +25C f = 120Hz VI = 15V to 25V IO = 1A, TJ = +25C f = 1kHz VI = 35V, TA = +25C TJ = +25C
Output Voltage
Notes: 11. Load and line regulation are specied at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with low duty is used. 12. These parameters, although guaranteed, are not 100% tested in production.
www.fairchildsemi.com
Electrical Characteristics (KA7815E) (Continued) Refer to test circuit, 0C < TJ < 125C, IO = 500mA, VI = 23V, CI = 0.33F, CO = 0.1F, unless otherwise specied.
KA7815E Symbol
VO
Parameter
Output Voltage TJ = +25C
Conditions
5.0mA IO 1.0A, PO 15W VI = 17.5V to 30V
Min.
14.4 14.25 54
Typ. Max.
15 15 11 3 12 4 5.2 -1 90 70 2 19 250 2.2 15.6 15.75 300 150 300 150 8.0 0.5 1.0
Unit
V
Regline
mV
Regload
Load
mV
mA mA mV/C V/Vo dB V m mA A
IO = 5mA to 1.0A VI = 17.5V to 30V IO = 5mA f = 10Hz to 100kHz, TA = +25C f = 120Hz VI = 18.5V to 28.5V IO = 1A, TJ = +25C f = 1kHz VI = 35V, TA = +25C TJ = +25C
Output Voltage
Notes: 13. Load and line regulation are specied at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with low duty is used. 14. These parameters, although guaranteed, are not 100% tested in production.
www.fairchildsemi.com
Electrical Characteristics (KA7818E) (Continued) Refer to test circuit, 0C < TJ < 125C, IO = 500mA, VI = 27V, CI = 0.33F, CO = 0.1F, unless otherwise specied.
KA7818E Symbol
VO
Parameter
Output Voltage TJ = +25C
Conditions
5.0mA IO 1.0A, PO 15W VI = 21V to 33V
Min.
17.3 17.1 53
Typ. Max.
18 18 15 5 15 5.0 5.2 -1 110 69 2 22 250 2.2 18.7 18.9 360 180 360 180 8.0 0.5 1
Unit
V
Regline
mV
Regload
Load
mV
mA mA mV/C V/Vo dB V m mA A
IO = 5mA to 1.0A VI = 21V to 33V IO = 5mA f = 10Hz to 100kHz, TA = +25C f = 120Hz VI = 22V to 32V IO = 1A, TJ = +25C f = 1kHz VI = 35V, TA = +25C TJ = +25C
Output Voltage
Notes: 15. Load and line regulation are specied at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with low duty is used. 16. These parameters, although guaranteed, are not 100% tested in production.
www.fairchildsemi.com
Electrical Characteristics (KA7824E) (Continued) Refer to test circuit, 0C < TJ < 125C, IO = 500mA, VI = 33V, CI = 0.33F, CO = 0.1F, unless otherwise specied.
KA7824E Symbol
VO
Parameter
Output Voltage TJ = +25C
Conditions
5.0mA IO 1.0A, PO 15W VI = 27V to 38V
Min.
23 22.8 50
Typ. Max.
24 24 17 6 15 5.0 5.2 0.1 0.5 -1.5 60 67 2 28 230 2.2 25 25.25 480 240 480 240 8.0 0.5 1
Unit
V
Regline
mV
Regload
Load
mV
mA mA mV/C V/Vo dB V m mA A
IO = 5mA to 1.0A VI = 27V to 38V IO = 5mA f = 10Hz to 100kHz, TA = +25C f = 120Hz VI = 28V to 38V IO = 1A, TJ = +25C f = 1kHz VI = 35V, TA = +25C TJ = +25C
Output Voltage
Notes: 17. Load and line regulation are specied at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with low duty is used. 18. These parameters, although guaranteed, are not 100% tested in production.
www.fairchildsemi.com
KA7805AE Symbol
VO
Parameter
Output Voltage
Conditions
TJ = +25C IO = 5mA to 1A, PO 15W VI = 7.5V to 20V
Min.
4.9 4.8
Typ.
5 5 5 3 5 1.5 9 9 4 5.0 -0.8 10 68 2 17 250 2.2
Max.
5.1 5.2 50 50 50 25 100 100 50 6.0 0.5 0.8 0.8
Unit
V
Regline
Line Regulation(19)
mV
Regload
Load
Regulation(19)
mV
IQ IQ
mA mA
Output Voltage
Drift(20)
IO = 5mA f = 10Hz to 100kHz TA = +25C f = 120Hz, IO = 500mA VI = 8V to 18V IO = 1A, TJ = +25C f = 1kHz VI = 35V, TA = +25C TJ = +25C
mV/C V/Vo dB V m mA A
Notes: 19. Load and line regulation are specied at constant junction temperature. Change in VO due to heating effects must be taken into account separately. Pulse testing with low duty is used. 20. These parameters, although guaranteed, are not 100% tested in production.
www.fairchildsemi.com
KA7806AE Symbol
VO
Parameter
Output Voltage
Conditions
TJ = +25C IO = 5mA to 1A, PO 15W VI = 8.6V to 21V
Min.
5.58 5.76
Typ.
6 6 5 3 5 1.5 9 9 5.0 4.3 -0.8 10 65 2 17 250 2.2
Max.
6.12 6.24 60 60 60 30 100 100 50 6.0 0.5 0.8 0.8
Unit
V
Regline
Line Regulation(21)
mV
Regload
Load
Regulation(21)
mV
IQ IQ
mA mA
Output Voltage
Drift(22)
IO = 5mA f = 10Hz to 100kHz, TA = +25C f = 120Hz, IO = 500mA VI = 9V to 19V IO = 1A, TJ = +25C f = 1kHz VI = 35V, TA = +25C TJ = +25C
mV/C V/Vo dB V m mA A
Notes: 21. Load and line regulation are specied at constant junction temperature. Change in VO due to heating effects must be taken into account separately. Pulse testing with low duty is used. 22. These parameters, although guaranteed, are not 100% tested in production.
www.fairchildsemi.com
Electrical Characteristics (KA7808AE) (Continued) Refer to the test circuits. 0C < TJ < +125C, IO = 1A, VI = 14V, CI = 0.33F, CO = 0.1F, unless otherwise specied.
KA7808AE Symbol
VO
Parameter
Output Voltage
Conditions
TJ = +25C IO = 5mA to 1A, PO 15W VI = 10.6V to 23V
Min.
7.84 7.7
Typ.
8 8 6 3 6 2 12 12 5 5.0 -0.8 10 62 2 18 250 2.2
Max.
8.16 8.3 80 80 80 40 100 100 50 6.0 0.5 0.8 0.8
Unit
V
Regline
Line Regulation(23)
VI = 10.6V to 25V, IO = 500mA VI = 11V to 17V TJ = +25C VI = 10.4V to 23V VI = 11V to 17V
mV
Regload
Load
Regulation(23)
mV
IQ IQ
mA mA
Output Voltage
Drift(24)
IO = 5mA f = 10Hz to 100kHz, TA = +25C f = 120Hz, IO = 500mA VI = 11.5V to 21.5V IO = 1A, TJ = +25C f = 1kHz VI = 35V, TA = +25C TJ = +25C
mV/C V/Vo dB V m mA A
Notes: 23. Load and line regulation are specied at constant junction temperature. Change in VO due to heating effects must be taken into account separately. Pulse testing with low duty is used. 24. These parameters, although guaranteed, are not 100% tested in production.
www.fairchildsemi.com
KA7809AE Symbol
VO
Parameter
Output Voltage
Conditions
TJ = +25C IO = 5mA to 1A, PO 15W VI = 11.2V to 24V
Min.
8.82 8.65
Typ.
9.0 9.0 6 4 6 2 12 12 5 5.0 -1.0 10 62 2.0 17 250 2.2
Max.
9.18 9.35 90 45 90 45 100 100 50 6.0 0.8 0.8 0.5
Unit
V
Regline
Line Regulation(25)
VI = 11.7V to 25V, IO = 500mA VI = 12.5V to 19V TJ = +25C VI = 11.5V to 24V VI = 12.5V to 19V
mV
Regload
Load
Regulation(25)
mV
IQ IQ
mA mA
Output Voltage
Drift(26)
IO = 5mA f = 10Hz to 100kHz, TA = +25C f = 120Hz, IO = 500mA VI = 12V to 22V IO = 1A, TJ = +25C f = 1kHz VI = 35V, TA = +25C TJ = +25C
mV/C V/Vo dB V m mA A
Notes: 25. Load and line regulation are specied at constant junction temperature. Change in VO due to heating effects must be taken into account separately. Pulse testing with low duty is used. 26. These parameters, although guaranteed, are not 100% tested in production.
www.fairchildsemi.com
KA7810AE Symbol
VO
Parameter
Output Voltage
Conditions
TJ = +25C IO = 5mA to 1A, PO 15W VI = 12.8V to 25V
Min.
9.8 9.6
Typ.
10.0 10.0 8.0 4.0 8.0 3.0 12.0 12.0 5.0 5.0 -1.0 10.0 62.0 2.0 17.0 250 2.2
Max.
10.2 10.4 100 50.0 100 50.0 100 100 50.0 6.0 0.5 0.8 0.5
Unit
V
Regline
Line Regulation(27)
VI = 12.8V to 26V, IO = 500mA VI = 13V to 20V TJ = +25C VI = 12.5V to 25V VI = 13V to 20V
mV
Regload
Load
Regulation(27)
mV
IQ IQ
mA mA
Output Voltage
Drift(28)
IO = 5mA f = 10Hz to 100kHz, TA = +25C f = 120Hz, IO = 500mA VI = 14V to 24V IO = 1A, TJ = +25C f = 1kHz VI = 35V, TA = +25C TJ = +25C
mV/C V/Vo dB V m mA A
Notes: 27. Load and line regulation are specied at constant junction temperature. Change in VO due to heating effects must be taken into account separately. Pulse testing with low duty is used. 28. These parameters, although guaranteed, are not 100% tested in production.
www.fairchildsemi.com
KA7812AE Symbol
VO
Parameter
Output Voltage
Conditions
TJ = +25C IO = 5mA to 1A, PO 15W VI = 14.8V to 27V
Min.
11.75 11.5
Typ.
12 12 10 4 10 3 12 12 5 5.1 -1.0 10 60 2.0 18 250 2.2
Max.
12.25 12.5 120 120 120 60 100 100 50 6.0 0.8 0.8 0.5
Unit
V
Regline
Line Regulation(29)
VI = 14.8V to 30V, IO = 500mA VI = 16V to 22V TJ = +25C VI = 14.5V to 27V VI = 16V to 22V
mV
Regload
Load
Regulation(29)
mV
IQ IQ
mA mA
Output Voltage
Drift(30)
IO = 5mA f = 10Hz to 100kHz, TA = +25C f = 120Hz, IO = 500mA VI = 14V to 24V IO = 1A, TJ = +25C f = 1kHz VI = 35V, TA = +25C TJ = +25C
mV/C V/Vo dB V m mA A
Notes: 29. Load and line regulation are specied at constant junction temperature. Change in VO due to heating effects must be taken into account separately. Pulse testing with low duty is used. 30. These parameters, although guaranteed, are not 100% tested in production.
www.fairchildsemi.com
KA7815AE Symbol
VO
Parameter
Output Voltage
Conditions
TJ = +25C IO = 5mA to 1A, PO 15W VI = 17.7V to 30V
Min.
14.7 14.4
Typ.
15 15 10 5 11 3 12 12 5 5.2 -1.0 10 58 2.0 19 250 2.2
Max.
15.3 15.6 150 150 150 75 100 100 50 6.0 0.8 0.8 0.5
Unit
V
Regline
Line Regulation(31)
VI = 17.9V to 30V, IO = 500mA VI = 20V to 26V TJ = +25C VI = 17.5V to 30V VI = 20V to 26V
mV
Regload
Load
Regulation(31)
mV
IQ IQ
mA mA
Output Voltage
Drift(32)
IO = 5mA f = 10Hz to 100kHz, TA = +25C f = 120Hz, IO = 500mA VI = 18.5V to 28.5V IO = 1A, TJ = +25C f = 1kHz VI = 35V, TA = +25C TJ = +25C
mV/C V/Vo dB V m mA A
Notes: 31. Load and line regulation are specied at constant junction temperature. Change in VO due to heating effects must be taken into account separately. Pulse testing with low duty is used. 32. These parameters, although guaranteed, are not 100% tested in production.
www.fairchildsemi.com
KA7818AE Symbol
VO
Parameter
Output Voltage
Conditions
TJ = +25C IO = 5mA to 1A, PO 15W VI = 21V to 33V
Min.
17.64 17.3
Typ.
18 18 15 5 15 5 15 15 7 5.2 -1.0 10 57 2.0 19 250 2.2
Max.
18.36 18.7 180 180 180 90 100 100 50 6.0 0.8 0.8 0.5
Unit
V
Regline
Line Regulation(33)
VI = 21V to 33V, IO = 500mA VI = 21V to 33V TJ = +25C VI = 20.6V to 33V VI = 24V to 30V
mV
Regload
Load
Regulation(33)
mV
IQ IQ
mA mA
Output Voltage
Drift(34)
IO = 5mA f = 10Hz to 100kHz, TA = +25C f = 120Hz, IO = 500mA VI = 22V to 32V IO = 1A, TJ = +25C f = 1kHz VI = 35V, TA = +25C TJ = +25C
mV/C V/Vo dB V m mA A
Notes: 33. Load and line regulation are specied at constant junction temperature. Change in VO due to heating effects must be taken into account separately. Pulse testing with low duty is used. 34. These parameters, although guaranteed, are not 100% tested in production.
www.fairchildsemi.com
KA7824AE Symbol
VO
Parameter
Output Voltage
Conditions
TJ = +25C IO = 5mA to 1A, PO 15W VI = 27.3V to 38V
Min.
23.5 23
Typ.
24 24 18 6 18 6 15 15 7 5.2 -1.5 10 54 2.0 20 250 2.2
Max.
24.5 25 240 240 240 120 100 100 50 6.0 0.8 0.8 0.5
Unit
V
Regline
Line Regulation(35)
VI = 27V to 38V, IO = 500mA VI = 21V to 33V TJ = +25C VI = 26.7V to 38V VI = 30V to 36V
mV
Regload
Load
Regulation(35)
mV
IQ IQ
mA mA
Output Voltage
Drift(36)
IO = 5mA f = 10Hz to 100kHz, TA = 25C f = 120Hz, IO = 500mA VI = 28V to 38V IO = 1A, TJ = +25C f = 1kHz VI = 35V, TA = +25C TJ = +25C
mV/C V/Vo dB V m mA A
Notes: 35. Load and line regulation are specied at constant junction temperature. Change in VO due to heating effects must be taken into account separately. Pulse testing with low duty is used. 36. These parameters, although guaranteed, are not 100% tested in production.
www.fairchildsemi.com
TJ = 25C VO = 100mV
-25
25
50
75
100
125
10
15
20
25
30
35
VI VO = 5V IO = 5mA
TJ = 25C VO = 5V IO = 10mA
1.01
.99
.98 -50
-25
25
50
75
100
125
10
15
20
25
30
35
www.fairchildsemi.com
Typical Applications
1
KA78XXE
2
Input CI
0.33F
Output CO
0.1F
Figure 7. DC Parameters
1 Input
KA78XXE
2
0.33F
2N6121 OR EQ
100
VO
5.1 Input
KA78XXE 2
3 Output
0.33F
RL
470F 120Hz +
www.fairchildsemi.com
KA78XXE
2
Input CI
0.33F
Output CO
0.1F
KA78XXE
2
Output
0.1F
Input CI
0.33F
CO
Vxx R1 IO RL
IQ
Vxx IO = + R1 IQ
KA78XXE
2
Input CI
0.33F
CO IQ
0.1F
R1
R2
IRI 51Q VO = VXX(1 + R2 / R1) + IQR2
www.fairchildsemi.com
Input
KA7805E 2
Output
CI
0.33F
- 2 KA741 + 3 4
CO 10K
0.1F
Input VI
KA78XXE
KA78XXE
2
Vo Output
0.33F
0.1F
www.fairchildsemi.com
1 VI
KA78XXE
2
3 VO
0.33F
0.1F
4.7k
COMMON 6
COMMON
KA741 4
+
4.7k
-VIN
TIP42
-VO
1 +20V 0.33F
KA7815E
2
2.2F 1 2
1F + 1N4001 3 -15V
-20V
KA7915E
www.fairchildsemi.com
KA78XXE
Input
D45H11
1mH
Output
4.7 Z1
470
KA78XXE
2
+ 10uF 0.5
0.33uF
+ 2000F
www.fairchildsemi.com
Mechanical Dimensions
Dimensions in millimeters
TO-220
9.90 0.20 4.50 0.20
1.30 0.10
2.80 0.10
(1.70)
1.30 0.05
+0.10
9.20 0.20
(1.46)
13.08 0.20
(1.00)
(3.00)
15.90 0.20
1.27 0.10
1.52 0.10
10.08 0.30
18.95MAX.
(3.70)
(45 )
0.50 0.05
+0.10
2.40 0.20
10.00 0.20
www.fairchildsemi.com
D-PAK
6.60 0.20 5.34 0.30 (0.50) (4.34) (0.50)
0.70 0.20
0.60 0.20
6.10 0.20
2.70 0.20
9.50 0.30
0.91 0.10
0.80 0.20
0.89 0.10
(0.70)
6.10 0.20
9.50 0.30
2.70 0.20
(2XR0.25)
0.76 0.10
(1.00)
www.fairchildsemi.com
MIN0.55
TRADEMARKS
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx FAST FASTr ActiveArray FPS Bottomless FRFET Build it Now GlobalOptoisolator CoolFET GTO CROSSVOLT HiSeC DOME I2C EcoSPARK i-Lo E2CMOS ImpliedDisconnect EnSigna IntelliMAX FACT FACT Quiet Series Across the board. Around the world. The Power Franchise Programmable Active Droop ISOPLANAR LittleFET MICROCOUPLER MicroFET MicroPak MICROWIRE MSX MSXPro OCX OCXPro OPTOLOGIC OPTOPLANAR PACMAN POP Power247 PowerEdge PowerSaver PowerTrench QFET QS QT Optoelectronics Quiet Series RapidConfigure RapidConnect SerDes ScalarPump SILENT SWITCHER SMART START SPM Stealth SuperFET SuperSOT-3 SuperSOT-6 SuperSOT-8 SyncFET TCM TinyLogic TINYOPTO TruTranslation UHC UniFET UltraFET VCX Wire
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILDS WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS.
2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.
Preliminary
No Identification Needed
Full Production
Obsolete
Not In Production
www.fairchildsemi.com