Routes Due Report

The Routes Due Report produces a listing of all routes in the current folder that are due to be recorded today. To change the date, for example to see which routes are due next week, right-click the background and choose Setup Report. Enter a new date and click Continue.

Structure and Route Reports

The Structure Report and Route Report generate textual descriptions of the contents of your database. The Structure Report lists all machines, points, measurement locations and schedule entries in the current selection. Click a machine then click Reports and select Structure Report from the list.
Section 3: Reports 57

To include bearing part numbers in the report, right-click the background and choose Setup Report. Tick the box beside 'Include Bearing Part Numbers' then click Click here to continue to generate the report. The Route Report creates a list of all route entries (the measurement locations on a route). Click a route to produce a list of route entries or click a machine to generate a report for all routes that include this machine. Now click the Report button and select Route Report.
Section 3: Reports 58

To include schedule entries or remove them from the report, right-click the background and choose Setup Report. Tick or un-tick the Include Schedule Entries tick box, then click Click here to continue to generate the report.

Automated Reports
If you need to print a large number of charts or reports this process can be carried out very quickly using the software's Automated Report system. An automated report creates a printable multi-page output of the latest recordings using the chart or report of your choice. For example you can create an alarm report of the latest recordings at every schedule entry on a machine and compile these into one printable report (1 alarm report per page). To generate an automated report, open the chart or report you want to print, select an item in the navigator e.g. a machine then choose View>Automated Report from the main menu.