Professional Documents
Culture Documents
Ii. Command
Ii. Command
Specify center point for circle or [3P/2P/Ttr (tan tan radius)]: Specify radius of circle or [Diameter] <6.0000>: 4
Specify next point or [Close/Undo]: @2<180 Command: LINE Specify first point: Specify next point or [Undo]: @19<180 Specify next point or [Close/Undo]: @16<90
Command: COMMANDLINE Specify next point or [Close/Undo]: *Cancel* Command: CIRCLE Specify center point for circle or [3P/2P/Ttr (tan tan radius)]: Specify radius of circle or [Diameter]: 6 Command: LINE Specify first point: Specify next point or [Undo]: >>Enter new value for ORTHOMODE <0>:
Current settings: Projection=UCS, Edge=None Select cutting edges ... Select objects or <select all>: 1 found
Command: '_zoom Specify corner of window, enter a scale factor (nX or nXP), or [All/Center/Dynamic/Extent s/Previous/Scale/Window/O bject] <real time>: _e Regenerating model.
Select objects: Resuming LINE command. Select object to trim or shiftselect to extend or [Fence/Crossing/Project/Ed ge/eRase/Undo]: Specify next point or [Undo]: @16<90 Select object to trim or shiftselect to extend or Specify next point or [Close/Undo]: @2<0 [Fence/Crossing/Project/Ed ge/eRase/Undo]:
Command: CIRCLE