Professional Documents
Culture Documents
AIM:
To draw the 2d view of following v block (front view, top view and side
view) using Auto CAD Software
Command: limits
Reset Model space limits:
Specify lower left corner or [ON/OFF] <0.0000,0.0000>: 0,0
Specify upper right corner <12.0000,9.0000>: 300,300
Command: zoom
[All/Center/Dynamic/Extents/Previous/Scale/Window] <real time>: all
Regenerating model.
FRONT VIEW
Command: Line
Specify first point: pick any point
Specify next point or [Undo]: @5<180
Specify next point or [Undo]: @20< 270
Specify next point or [Undo]: @30<0
Specify next point or [Undo]: @20<90
Specify next point or [Undo]: @5<180
Specify next point or [Close/Undo]: Close
Command: Line
Specify first point: (SELECT END 1)
Specify next point or [Undo]: @14.1<315 ENTER
Command: Line
Specify first point: (SELECT END 2)
Specify next point or [Undo]: @14.1<225 ENTER
TOP VIEW
Command: Line
Specify first point: pick any point with reference to front view
Specify next point or [Undo]: @30<0
Specify next point or [Undo]: @30<270
Specify next point or [Undo]: close
COMPUTER AIDED DRAFTING AND MODELING LAB
COMPUTER AIDED DRAFTING AND MODELING LAB
Command: Offset
Specify offset distance or [Through] <25.0000>:5
Select object to offset or <exit>: LINE 1
Specify point on side to offset: ↑ UPSIDE
Select object to offset or <exit>: ENTER
Command: Offset
Specify offset distance or [Through] <25.0000>:10
Select object to offset or <exit>: LINE 2
Specify point on side to offset: → RIGHT SIDE
Select object to offset or <exit>: ENTER
SIDE VIEW
Command: Line
Specify first point: pick any point with reference to front view
Specify next point or [Undo]: @30<0
Specify next point or [Undo]: @20<90
Specify next point or [Undo]: @30<180
Specify next point or [Undo]: close
Command: Offset
Specify offset distance or [Through] : 10
Select object to offset or <exit>: SELECT LINE
Specify point on side to offset: ↑ UPSIDE
Select object to offset or <exit>: ENTER
Command: Text
Specify starting point: pick any point
Specify the height: 5
Type the text: front view, top view, side view
RESULT:
Thus the 2D view of V block drawing was successfully created using
Auto CAD Software