Page Katsuyuki Shiga ( PinoArt ) Canon Inc. Notation Key Scissors Paste, or woodwork glue Stencil pen, or bodkin Ruler A1, B1 Tools Scissors line Mountain fold Valley fold Glue spot Parts No. The Assembly instructions are divided into three blocks: A (head), B (body), and C (legs). Follow the instructions for each block to assemble your black rhinoceros.
mark is a basic assembly technique that remains the same regardless of the part. Instructions are printed only for the first instance. <Caution> Keep scissors and glue away from small children. Be careful not to cut your fingers when using scissors. Assemble the head A Use pattern: Page2 / Page3. Cut out A1 by cutting along the lines. Cut along the line marked . Triangular glue tab Glue spot Parts No. Cut a slot right into the apex of the triangular glue tab. Scissors line Make a valley fold on A1. Trace along the valley fold line with a stencil pen, scoring it to make it easier to fold. Using the photo as a guide, apply pressure with the palm of your hand, gradually curling the paper in the direction of the arrow. The parts will be easier to assemble if curled. Attach the triangular glue tabs so that the front side becomes convex. Add a slight curl to A1 when attaching it. Using the photo as a guide, attach in the direction of the arrow. Assemble the body Use pattern: Page4 to Page6. B Cut away the white part. Apply some glue here. Apply some glue here. Apply some glue here. Black Rhinoceros : Assembly Instructions Katsuyuki Shiga ( PinoArt ) Canon Inc. Page Attach A1 and A2, and attach A3 to them. Attach A4 to the head. Glue A5 and A6 together, and add a curve as you assemble them. Assemble A7 and A8 in the same way. Attach the ears to the head. Assemble A9, A10, A11, A12 and A13, A14, and attach them. Attach the horn to the head to complete the head. Assemble B1, B2 and B3. Black Rhinoceros : Assembly Instructions Katsuyuki Shiga ( PinoArt ) Canon Inc. Page Attach B4 and B5, and attach them to B2 and B3. Attach B6 and B7, and attach B8 to them. Attach the head and the body to complete the body. Assemble the legs Use pattern: Page7 to Page9. C Assemble C1 and C2. Attach C1 and C2 to the body. Assemble C3, C4 and C5. In the same way, assemble C6, C7 and C8. Attach C3, C4, and C5. In the same way, attach C6, C7 and C8. Attach the buttock to the body. Next, glue them one by one. Black Rhinoceros : Assembly Instructions Katsuyuki Shiga ( PinoArt ) Canon Inc. Page Assemble C9, C10 and C11. In the same way, assemble C12, C13 and C14. Attach C9, C10 and C11. In the same way, attach C12, C13 and C14. Assemble C15, C16, C17 and C18. Attach together without using glue. Without adding glue, fit the feet to the legs so that they stand on the ground. Next, attach them together with glue. Attach C19 to the body, and your black rhinoceros is complete.