Professional Documents
Culture Documents
D D D D D D D
Short-Circuit Protection Offset-Voltage Null Capability Large Common-Mode and Differential Voltage Ranges No Frequency Compensation Required Low Power Consumption No Latch-Up Designed to Be Interchangeable With Fairchild A741
NC NC OFFSET N1 IN IN + VCC NC
1 2 3 4 5 6 7
14 13 12 11 10 9 8
description
The A741 is a general-purpose operational amplifier featuring offset-voltage null capability. The high common-mode input voltage range and the absence of latch-up make the amplifier ideal for voltage-follower applications. The device is short-circuit protected and the internal frequency compensation ensures stability without external components. A low value potentiometer may be connected between the offset null inputs to null out the offset voltage as shown in Figure 2. The A741C is characterized for operation from 0C to 70C. The A741I is characterized for operation from 40C to 85C.The A741M is characterized for operation over the full military temperature range of 55C to 125C.
OFFSET N1 IN IN + VCC
1 2 3 4
8 7 6 5
NC OFFSET N1 IN IN + VCC
1 2 3 4 5
10 9 8 7 6
symbol
OFFSET N1 IN + IN OFFSET N2 + OUT
NC IN NC IN + NC
4 5 6 7 8
3 2 1 20 19 18 17 16 15 14 9 10 11 12 13
PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.
NC VCC NC OFFSET N2 NC
AVAILABLE OPTIONS PACKAGED DEVICES TA 0C to 70C 40C to 85C 55C to 125C SMALL OUTLINE (D) A741CD A741ID A741MFK A741MJ A741MJG CHIP CARRIER (FK) CERAMIC DIP (J) CERAMIC DIP (JG) PLASTIC DIP (P) A741CP A741IP A741MU TSSOP (PW) A741CPW FLAT PACK (U) CHIP FORM (Y) A741Y
The D package is available taped and reeled. Add the suffix R (e.g., A741CDR).
schematic
VCC+
IN
OUT IN+
OFFSET N1 OFFSET N2
VCC
(7)
(6)
IN + IN
(3) (2)
(8)
OFFSET N1 OFFSET N2
(1) (5)
45
(5)
(1)
(4)
(2)
36
(3)
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
A741C Supply voltage, VCC+ (see Note 1) Supply voltage, VCC (see Note 1) Differential input voltage, VID (see Note 2) Input voltage, VI any input (see Notes 1 and 3) Voltage between offset null (either OFFSET N1 or OFFSET N2) and VCC Duration of output short circuit (see Note 4) Continuous total power dissipation Operating free-air temperature range, TA Storage temperature range Case temperature for 60 seconds Lead temperature 1,6 mm (1/16 inch) from case for 60 seconds FK package J, JG, or U package 0 to 70 65 to 150 18 18 15 15 15 unlimited A741I 22 22 30 15 0.5 unlimited 40 to 85 65 to 150 A741M 22 22 30 15 0.5 unlimited 55 to 125 65 to 150 260 300 C C C C UNIT V V V V V
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds D, P, or PW package 260 260 C Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. All voltage values, unless otherwise noted, are with respect to the midpoint between VCC+ and VCC . 2. Differential voltages are at IN+ with respect to IN . 3. The magnitude of the input voltage must never exceed the magnitude of the supply voltage or 15 V, whichever is less. 4. The output may be shorted to ground or either power supply. For the A741M only, the unlimited duration of the short circuit applies at (or below) 125C case temperature or 75C free-air temperature. DISSIPATION RATING TABLE PACKAGE D FK J JG P PW U TA 25C POWER RATING 500 mW 500 mW 500 mW 500 mW 500 mW 525 mW 500 mW DERATING FACTOR 5.8 mW/C 11.0 mW/C 11.0 mW/C 8.4 mW/C N/A 4.2 mW/C 5.4 mW/C DERATE ABOVE TA 64C 105C 105C 90C N/A 25C 57C TA = 70C POWER RATING 464 mW 500 mW 500 mW 500 mW 500 mW 336 mW 432 mW TA = 85C POWER RATING 377 mW 500 mW 500 mW 500 mW 500 mW N/A 351 mW TA = 125C POWER RATING N/A 275 mW 275 mW 210 mW N/A N/A 135 mW
All characteristics are measured under open-loop conditions with zero common-mode input voltage unless otherwise specified. Full range for the A741C is 0C to 70C, the A741I is 40C to 85C, and the A741M is 55C to 125C. NOTE 5: This typical value applies only at frequencies above a few hundred hertz because of the effects of drift and thermal feedback.
electrical characteristics at specified free-air temperature, VCC = 15 V, TA = 25C (unless otherwise noted)
PARAMETER VIO VIO(adj) IIO IIB VICR VOM AVD ri ro Ci CMRR kSVS IOS ICC Input offset voltage Offset voltage adjust range Input offset current Input bias current Common-mode input voltage range Maximum peak output voltage swing Large-signal differential voltage amplification Input resistance Output resistance Input capacitance Common-mode rejection ratio Supply voltage sensitivity (VIO /VCC) Short-circuit output current Supply current VO = 0, VO = 0, No load VIC = VICRmin VCC = 9 V to 15 V 70 VO = 0, See Note 5 RL = 10 k RL = 2 k RL 2 k TEST CONDITIONS VO = 0 VO = 0 VO = 0 VO = 0 12 12 10 20 0.3 A741Y MIN TYP 1 15 20 80 13 14 13 200 2 75 1.4 90 30 25 1.7 150 40 2.8 200 500 MAX 6 UNIT mV mV nA nA V V V/mV M pF dB V/V mA mA
PD Total power dissipation No load 50 85 mW All characteristics are measured under open-loop conditions with zero common-mode voltage unless otherwise specified. NOTE 5: This typical value applies only at frequencies above a few hundred hertz because of the effects of drift and thermal feedback.
TEST CIRCUIT
APPLICATION INFORMATION
Figure 2 shows a diagram for an input offset voltage null circuit.
IN + IN OFFSET N1 10 k + OUT OFFSET N2
To VCC
TYPICAL CHARACTERISTICS
INPUT OFFSET CURRENT vs FREE-AIR TEMPERATURE
400 350 I IB Input Bias Current nA 300 250 200 150 100 50 0 60 40 20
VCC+ = 15 V VCC = 15 V
VCC+ = 15 V VCC = 15 V
0 60 40 20
20
40
60
20
40
60
TA Free-Air Temperature C
TA Free-Air Temperature C
Figure 3
MAXIMUM PEAK OUTPUT VOLTAGE vs LOAD RESISTANCE
14 VOM Maximum Peak Output Voltage V 13 12 11 10 9 8 7 6 5 4 0.1 0.2 0.4 0.7 1 2 4 7 VCC+ = 15 V VCC = 15 V TA = 25C
Figure 4
10
RL Load Resistance k
Figure 5
Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
TYPICAL CHARACTERISTICS
OPEN-LOOP SIGNAL DIFFERENTIAL VOLTAGE AMPLIFICATION vs SUPPLY VOLTAGE
400 VCC+ = 15 V VCC = 15 V RL = 10 k TA = 25C VO = 10 V RL = 2 k TA = 25C
200
100
40
20
10
12
14
16
18
20
Figure 6
Figure 7
OPEN-LOOP LARGE-SIGNAL DIFFERENTIAL VOLTAGE AMPLIFICATION vs FREQUENCY
110 100 VCC+ = 15 V VCC = 15 V VO = 10 V RL = 2 k TA = 25C
90 80 70 60 50 40 30 20 10 0 10 1 10 100 1k 10k
100k
1M
10M
f Frequency Hz
TYPICAL CHARACTERISTICS
COMMON-MODE REJECTION RATIO vs FREQUENCY
100 CMRR Common-Mode Rejection Ratio dB 90 80 70 60 50 40 30 20 10 0 1 100 10k f Frequency Hz 1M 100M VCC+ = 15 V VCC = 15 V BS = 10 k TA = 25C VO Output Voltage mV 28 24 20 16 12 8 4 10% 0 tr 4 0 0.5 1 t Time s VCC+ = 15 V VCC = 15 V RL = 2 k CL = 100 pF TA = 25C 1.5 2 2.5
90%
Figure 8
VOLTAGE-FOLLOWER LARGE-SIGNAL PULSE RESPONSE
8 6 Input and Output Voltage V 4 VO 2 0 VI 2 4 6 8 0 10 20 30 40 50 60 70 80 90 t Time s VCC+ = 15 V VCC = 15 V RL = 2 k CL = 100 pF TA = 25C
Figure 9
Figure 10
10
18-Feb-2005
PACKAGING INFORMATION
Orderable Device UA741CD UA741CDR UA741CJG UA741CJG4 UA741CP UA741CPSR UA741MFKB UA741MJ UA741MJB UA741MJG UA741MJGB
(1)
Status (1) ACTIVE ACTIVE OBSOLETE OBSOLETE ACTIVE ACTIVE OBSOLETE OBSOLETE OBSOLETE OBSOLETE OBSOLETE
Package Type SOIC SOIC CDIP CDIP PDIP SO LCCC CDIP CDIP CDIP CDIP
Package Drawing D D JG JG P PS FK J J JG JG
Pins Package Eco Plan (2) Qty 8 8 8 8 8 8 20 14 14 8 8 50 2000 75 2500 Pb-Free (RoHS) Pb-Free (RoHS) None None Pb-Free (RoHS) Pb-Free (RoHS) None None None None None
Lead/Ball Finish CU NIPDAU CU NIPDAU Call TI Call TI CU NIPDAU CU NIPDAU Call TI Call TI Call TI Call TI Call TI
MSL Peak Temp (3) Level-2-260C-1 YEAR/ Level-1-235C-UNLIM Level-2-260C-1 YEAR/ Level-1-235C-UNLIM Call TI Call TI Level-NC-NC-NC Level-2-260C-1 YEAR/ Level-1-235C-UNLIM Call TI Call TI Call TI Call TI Call TI
The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - May not be currently available - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. None: Not yet available Lead (Pb-Free). Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Green (RoHS & no Sb/Br): TI defines "Green" to mean "Pb-Free" and in addition, uses package materials that do not contain halogens, including bromine (Br) or antimony (Sb) above 0.1% of total product weight.
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDECindustry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
Addendum-Page 1
MECHANICAL DATA
MCER001A JANUARY 1995 REVISED JANUARY 1997
JG (R-GDIP-T8)
0.400 (10,16) 0.355 (9,00) 8 5
CERAMIC DUAL-IN-LINE
0.023 (0,58) 0.015 (0,38) 0.100 (2,54) 0.014 (0,36) 0.008 (0,20)
015
4040107/C 08/96 NOTES: A. B. C. D. E. All linear dimensions are in inches (millimeters). This drawing is subject to change without notice. This package can be hermetically sealed with a ceramic lid using glass frit. Index point is provided on cap for terminal identification. Falls within MIL STD 1835 GDIP1-T8
MECHANICAL DATA
MLCC006B OCTOBER 1996
FK (S-CQCC-N**)
28 TERMINAL SHOWN
18
17
16
15
14
13
12
NO. OF TERMINALS ** 11 10 28 9 8 7 6 68 5 84 44 52 20
A MIN 0.342 (8,69) 0.442 (11,23) 0.640 (16,26) 0.739 (18,78) 0.938 (23,83) 1.141 (28,99) MAX 0.358 (9,09) 0.458 (11,63) 0.660 (16,76) 0.761 (19,32) 0.962 (24,43) 1.165 (29,59) MIN 0.307 (7,80) 0.406 (10,31) 0.495 (12,58) 0.495 (12,58) 0.850 (21,6) 1.047 (26,6)
B MAX 0.358 (9,09) 0.458 (11,63) 0.560 (14,22) 0.560 (14,22) 0.858 (21,8) 1.063 (27,0)
19 20 21 B SQ 22 A SQ 23 24 25
26
27
28
4040140 / D 10/96 NOTES: A. B. C. D. E. All linear dimensions are in inches (millimeters). This drawing is subject to change without notice. This package can be hermetically sealed with a metal lid. The terminals are gold plated. Falls within JEDEC MS-004
MECHANICAL DATA
MPDI001A JANUARY 1995 REVISED JUNE 1999
P (R-PDIP-T8)
0.400 (10,60) 0.355 (9,02) 8 5
PLASTIC DUAL-IN-LINE
4 0.070 (1,78) MAX 0.325 (8,26) 0.300 (7,62) 0.015 (0,38) 0.200 (5,08) MAX Seating Plane 0.125 (3,18) MIN 0.010 (0,25) NOM Gage Plane
4040082/D 05/98 NOTES: A. All linear dimensions are in inches (millimeters). B. This drawing is subject to change without notice. C. Falls within JEDEC MS-001
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TIs terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TIs standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Amplifiers Data Converters DSP Interface Logic Power Mgmt Microcontrollers amplifier.ti.com dataconverter.ti.com dsp.ti.com interface.ti.com logic.ti.com power.ti.com microcontroller.ti.com Applications Audio Automotive Broadband Digital Control Military Optical Networking Security Telephony Video & Imaging Wireless Mailing Address: Texas Instruments Post Office Box 655303 Dallas, Texas 75265 Copyright 2005, Texas Instruments Incorporated www.ti.com/audio www.ti.com/automotive www.ti.com/broadband www.ti.com/digitalcontrol www.ti.com/military www.ti.com/opticalnetwork www.ti.com/security www.ti.com/telephony www.ti.com/video www.ti.com/wireless
This datasheet has been download from: www.datasheetcatalog.com Datasheets for electronics components.