Professional Documents
Culture Documents
Installation for the production of prestressed beams and hollow core slabs
Saws
Saw S-300
Saw CR-900
Saw CR-1300
Saw S-300
Saw S-300
Maximum cutting height 300 mm with blade 900 mm Blade motor 45 kW Manual operation Water tank capacity 1000 l with level gauge
Saw S-300
300 mm
Saw CR-900
Saw CR-900
Maximum cutting height 300 mm Able to cut with blades 700, 800 or 900 mm (only by adjusting the stops) Blade motor power 45 kW Option for programmed cuts (as an option) Enrollers for the electric cable and water hose (as an option) Minimum maintenance
Saw CR-900
300 mm
Maximum cutting height 300 mm
Saw CR-1300
Saw CR-1300
Maximum cutting height 500 mm Able to cut with blades 1.300 mm Blade motor power 45 kW Option for programmed cuts (as an option) Enrollers for the electric cable and water hose (as an option) Minimum maintenance
Saw CR-1300
500 mm
Maximum cutting height 300 mm with blade 900 mm 45 cuts in one cycle, from 45 to 70 in two cycles Blade motor 45 kW Longitudinal cuts Semiautomatic operation
300 mm
Maximum cutting height 300 mm
70
Turning carriage
Allowing cuts to 70
500 mm
CROSS CUT
Turnig carriage
ANGLE CUT
www.prensoland.com