Professional Documents
Culture Documents
2013-7-16
Huawei confidential, no
spreading without permission
Page 1, Total7
Contents
HUAWEI P6-U06V100R001C00B107 SOFTWARE UPGRADE GUIDELINE .............................. 1
1
1.2
2.2
2.3
3.2
5.1
5.2
6.2
2013-7-16
Huawei confidential, no
spreading without permission
Page 2, Total7
1 Upgrade instruction
1.1 About software version
This is software version for P6-U06V100R001C00B107 product, please operate after
read the upgrade guideline carefully .
(1) Software requirement
a. Before upgrade, please guarantee the version you use is Huawei official
version, or else it may upgrade failed or cause unknown problem.
b. Dont try to upgrade software of other country or customization, or else it may
upgrade failed or cause unknown problem.
(2) Hardware requirment
This the software suits to P6-U06 product, it can only use for P6-U06 product ,
and it may cause cant power on if you use this software on other product.
Any problem cause by user dont follow the instructions, Huawei will not
provide in warranty service .
1.2
data.
To make sure that the power of the battery is enough to run the upgrade process.
Maybe you can connect the handset with the charger or the USB data cable to provide
power.
2013-7-16
Huawei confidential, no
spreading without permission
Page 3, Total7
2 Version introduction
2.1
SOFTWARE_VER_LIST.mbn
2.2
Upgrade prerequisite
The P6-U06 handset software should be updated with the MICRO SD card.
2.3
Upgrade files
File Name
Main package
dload\ UPDATE.APP
Update tools
SD card
3 Upgrade preparation
3.1
3.2
4 Upgrade introduction
There are two methods to upgrade: normal upgrade and force upgrade.
Normal upgrade needs to start the handset and enter the Setting module. Force
upgrade is often used when the handset cant boot up or cant enter the idle screen. If
need force upgrade, please pull out the battery and set again.
2013-7-16
Huawei confidential, no
spreading without permission
Page 4, Total7
5 Upgrade operations
Notices:
1. Upgrade will erase the user data, please backup your data before upgrade.
2. Ensure that the power is at least 15% left when upgrading.
5.1
Force upgrade
Step 1. A MICRO SD card of 2GB or more should be available. The MICRO SD card
made by Sandisk, Kingstone, or Kingmax is recommended.
Step 2. Format the MICRO SD card (This operation is optional).
Step 3. Make sure that there is an UPDATE.APP under the dload. Copy the Main
package of dload in PC to dload of SD card.
Step 4. Make sure your handset is power off. Insert the MICRO SD card into the
handset. Pressing the VOLUME UP key and VOLUME DOWN key, then press
the POWER key to power on the phone, and VOLUME UP key and VOLUME
DOWN key should be pressed more than 3 seconds, then enter the Software
Upgrade Mode.
5.2
Normal upgrade
Step 1. A MICRO SD card of 2GB or more should be available. The MICRO SD card
made by Sandisk, Kingstone, or Kingmax is recommended.
2013-7-16
Huawei confidential, no
spreading without permission
Page 5, Total7
6 Upgrade validate
6.1
By Setting ->About phone->Build number, to check the version. Just like the
picture below:
Build number P6-U06V100R001C00B107
2013-7-16
Huawei confidential, no
spreading without permission
Page 6, Total7
6.2
If you it still cant solve the problem , Please send your to nearest service center.
2013-7-16
Huawei confidential, no
spreading without permission
Page 7, Total7