Professional Documents
Culture Documents
Features Frame Stracture Switching Points DL Control Channel UL Control Channel PRACH Preamble Format PRACH Configuration Special Slot usage HARQ Timing Ack/Nack Feedback Mode System Information Variation N/A K = 4 (fixed) DL : Async, UL :Sync N/A FDD
Go Back To Index
Home : www.sharetechnote.com
Can Schedule 1 DL and 1 UL subframe at a Can schedule 1 DL and multiple UL subtime frame at a time Single Ack/Nack corresponding to 1DLsub frame 0,1,2,3 Ack/Nack corresponding to multiple DL sub frame 0,1,2,3,4(Short RACH) DwPTS : RS, Data and Control UpPTS : SRS and Short RACH K = varying depending on Subframe Config DL : Async, UL : Sync Bundling or Multiplexed SIB1
Length in Samples (Normal CP) DwPTS 6592 Ts 19760 Ts 21952 Ts 24144 Ts GP UpPTS 2560 Ts 2560 Ts 2560 Ts 2560 Ts
0 1 2 3
4 5 6 7 8
12 3 9 10 11
1 9 3 2 1
1 2 2 2 2
Switching Points
PRACH Preamble Format Refer to 36.211 5.7 Physical random access channel for the details.
RACH Configuration
Special Slot Usage < RB Allocation on Special Subframe > Refer to 36.213 7.1.7 Modulation order and transport block size determination for the details.
Ack/Nack Feedback Mode As described above, in TDD LTE ibe subframe can transmit ACK/NACK for multiple subframe as shown below. In the following figure as an example, UE send ACK/NACK for 4 PDSCHs in subframe 2. What should eNB do if the subframe 2 send NACK ? Does it have to retransmit the whole 4 PDSCHs ? or transmit only PDSCH which is NACKed ?
The answer to the question gets different depending on tdd-AckNackFeedbackMode setting in RRC message (e.g, RRC Connection Setup or RRC Connection Reconfiguration). If it is set to be 'bundling', eNB should retransmit all the PDSCH. If it is sent to be 'multiplexing', eNB should retransmit the only PDSCH which is NACKed.