Professional Documents
Culture Documents
Date: ______________________
Atten: Contrex Technical Support
Fax Number: 1-763-424-8734
From:
Name ____________________________________
Ext______________
Please turn the page to record any CPs that you have changed from the default value>
SK1607 Rev 7
Please record the Control Parameters that you have changed from the default value:
Code# Description
CP-01
CP-02
CP-03
CP-04
CP-05
CP-06
CP-10
CP-12
CP-13
CP-14
CP-15
CP-16
CP-17
CP-20
CP-21
Master Setpoint 1
Master Setpoint 2
Follower Setpoint 1
Follower Setpoint 2
Jog Setpoint
Direct Setpoint
Alarm Format
Low Alarm
High Alarm
Ramped Error
Scaled Error
Acceleration Time
Deceleration Time
Master Eng. Units
Follower Eng. Units
User
Record
Code# Description
CP-30
CP-31
CP-33
CP-34
CP-61
CP-62
CP-64
CP-65
CP-66
CP-67
CP-70
CP-71
CP-72
CP-73
CP-74
User
Record
PPR Lead
PPR-Feedback
Max RPM Lead
Max RPM Feedback
Direct Enable
Inverse Scaling
Display Mode Follower
Gain
Integral
Derivative
Device Address
Baud Rate
Character Format
Control Mask
Drive Enable Logic
Please record what the relevant Monitor Parameters display when the problem occurs:
Code# Description
MP-40
MP-41
MP-43
MP-44
MP-45
MP-46
MP-47
MP-48
MP-50
MP-51
Tach
Lead Frequency
Feedback Frequency
Deviation (Error)
Scaled Reference
Ramped Reference
Spd Command Output
Trim Output
Active Scaling Mode
Keypad Error
Displayed Code#
MP-52
MP-53
MP-54
MP-55
MP-56
MP-57
MP-58
MP-59
MP-99
MP-00
Description
Alarm Status
Control State
Logic Inputs-Group A
Logic Inputs-Group B
Logic Outputs
EEPROM Status
Serial Comm Error
Frequency Overflow
Software Code Rev
Software Part Number
Displayed