You are on page 1of 3

Seminar On

VOLTAGE SAGS AND SWELLS MITIGATION BY USING DYNAMIC VOLTAGE RESTORER


by

MADASU SAIDULU Roll. No. 100511743308 M.E (PES)

INDEX
Pg No.

ABSTRACT INTRODUCTION

1
2

1. Basic Configuration Of DVR 1.1 An Injection/ Booster transformer 1.2 A Harmonic filter 1.3 A Voltage Source Converter (VSC) 1.4 DC charging circuit

4 4 5 5 6 7 7 8 8

2. Operating M odes of DVR:


2.1 Protection Mode 2.2 Standby Mode 2.3 Injection/Boost Mode.

3. Voltage Injection Methods of DVR


3.1 Pre-sag Compensation Method 3.2 In-Phase Compensation Method 3.3 In-Phase Advanced Compensation Method 3.4 Voltage Tolerance Method with Minimum Energy Injection

9
9 10 12 12 13 13 14 15 18

4. Control Techniques Used in Commercially Available DVRs


4.1 Fourier Transform 4.2 Phase Locked Loop (PLL) 4.3 Vector Control (Software Phase Locked Loop SPLL) 4.4 Peak Value Detection

5. Simulation
5.1 Voltage Sags 5.2 Voltage Swells

19 20 21 24

6. Conclusion 7. References

25

You might also like