To successfully run simulations in Cadence, users must:
1) Add "setenv CDS_Netlisting_Mode "Analog"" to their .cshrc file.
2) Re-login to eelaps.seas.ucla.edu and open Cadence.
3) For those who built the schematic but had simulation problems, re-compile the netlist by clicking "Simulation -> Netlist -> Create" or making a small change to the schematic after updating the .cshrc file.
To successfully run simulations in Cadence, users must:
1) Add "setenv CDS_Netlisting_Mode "Analog"" to their .cshrc file.
2) Re-login to eelaps.seas.ucla.edu and open Cadence.
3) For those who built the schematic but had simulation problems, re-compile the netlist by clicking "Simulation -> Netlist -> Create" or making a small change to the schematic after updating the .cshrc file.
To successfully run simulations in Cadence, users must:
1) Add "setenv CDS_Netlisting_Mode "Analog"" to their .cshrc file.
2) Re-login to eelaps.seas.ucla.edu and open Cadence.
3) For those who built the schematic but had simulation problems, re-compile the netlist by clicking "Simulation -> Netlist -> Create" or making a small change to the schematic after updating the .cshrc file.