Professional Documents
Culture Documents
USC Girder
USKW 35 55 #10 screws A B 4 4 5 5 6 6 8 8 2 4 3 6 3 8 4 10 4 8 5 10 6 12 7 14
USC Tie-in
970 1215 1455 1940 340 510 640 850 890 1110 1335 1560
USD Tie-in
30 USW 035 End Vertical Fasten to Bent Angle w/ 2 rows of #10 SDS spaced evenly See chart for number of screws
35
USKW Fasten to Girder w/ #10 SDS spaced evenly See chart for number of screws
B A
55
USC Girder 1-Ply Tie-In Truss (shown as USC) 45 - 135 362 USWD 035 (Min.) Cap w/ 362T125 054 x 6" Fasten w/ 2 rows of #10 SDS spaced evenly (one row into each flange) See chart for number of screws
30 USW 035 End Vertical Fasten to Bent Angle w/ 2 rows of #10 SDS spaced evenly See chart for number of screws
USKW Fasten to Girder w/ #10 SDS spaced evenly See chart for number of screws
35
55
970 1215 1455 1940 2370 340 510 640 850 890 1110 1335 1560
USD Tie-in
TM
DETAIL NO.
US2US-21
CATEGORY
M E T A L F R A M I N G a divsion of MITEK
www.AEGISMETALFRAMING.COM
14515 N. Outer 40 Drive Suite 110 Chesterfield, MO 63017 Phone:866/902-3447 Fax:314/434-5234
STANDARD DETAILS
DATE
8/21/2008