Professional Documents
Culture Documents
Parker Handbook PDF
Parker Handbook PDF
Parker O-Ring
Handbook
Catalog ORD 5700A/US
Parker
O-Ring
Handbook
2001 Edition
Sections
I
II
III
IV
V
VI
VII
Seals
WARNING
Failure, improper selection or improper use of the products and/or systems described
herein or related items can cause death, personal injury or property damage.
This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provides product and/or system options for further
investigation by users having technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product or
system in the current product catalog. Due to the variety of operating conditions and applications for these products or systems, the user, through his or her own analysis
and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance, safety and warning requirements of the
application are met.
The products describes herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Parker Hannifin
Corporation and its subsidiaries at any time without notice.
OFFER OF SALE
The items described in this document are hereby offered for sale by Parker Hannifin Corporation, its subsidiaries and its authorized distributors. This offer and its
acceptance are governed by the provisions stated on the separate page of this document entitled Offer of Sale.
Copyright 1999, 2001, Parker Hannifin Corporation, Cleveland, OH. All rights reserved.
5700 Handbook
Table of
Contents
I. Introduction
Seals
Introduction
5700 Handbook
Section I
Introduction
1.0 How to Use This Handbook .................................................................................................................... 1-2
1.1 What is an O-ring?............................................................................................................................ 1-2
1.2 What is an O-ring Seal? .................................................................................................................... 1-2
1.3 Advantages of O-rings ...................................................................................................................... 1-2
1.4 Operation ......................................................................................................................................... 1-3
1.5 O-ring Characteristics....................................................................................................................... 1-3
1.6 Limitations of O-ring Use ................................................................................................................ 1-4
1.7 Scope of O-ring Use ......................................................................................................................... 1-4
1.7.1 Static Seals................................................................................................................................ 1-5
1.7.2 Reciprocating Seals .................................................................................................................. 1-5
1.7.3 Oscillating Seals ....................................................................................................................... 1-5
1.7.4 Rotary Seals .............................................................................................................................. 1-5
1.7.5 Seat Seals .................................................................................................................................. 1-6
1.7.6 Pneumatic Seals ........................................................................................................................ 1-6
1.7.7 Vacuum Seals ............................................................................................................................ 1-6
1.7.8 Cushion Installation .................................................................................................................. 1-6
1.7.9 Crush Installation...................................................................................................................... 1-6
1.7.10 Rod Wiper Installation ............................................................................................................ 1-6
1.8 O-rings as Drive Belts ...................................................................................................................... 1-7
1.9 Custom Molded Shapes .................................................................................................................... 1-7
1.10 Parker Engineering ......................................................................................................................... 1-7
1.11 Comparison of Common Seal Types .............................................................................................. 1-7
1.12 Recommended Design Procedure .................................................................................................. 1-7
1.12.1 O-Ring Design Procedure Using
inPHorm O-Ring Design & Material Selection Software ................................................. 1-8
1.12.2 Recommended Manual Design Procedure ............................................................................. 1-8
1-1
Seals
Introduction
5700 Handbook
I n t rro
oduction
Bore
Piston Rod
1-2
Seals
Introduction
5700 Handbook
O-Ring Seals in the Design of Hydraulic Mechanisms, a paper presented at the S.A.E. Annual Meeting, January, 1947 by Mr. D. R. Pearl of Hamilton Standard Prop.
Div. of United Aircraft Corp.
1-3
Seals
Introduction
5700 Handbook
1-4
Seals
, limitations of
Although it has been stated that O-rings offer a reasonable approach to the ideal hydraulic seal, they
should not be considered the immediate solution to all
sealing problems. It has been brought out in the foregoing discussion that there are certain definite limitations
on their use, i.e., high temperature, high rubbing speeds,
cylinder ports over which seals must pass and large
shaft clearances. Disregard for these limitations will
result in poor seal performance. Piston rings, lip type
seals, lapped fits, flat gaskets and pipe fittings all have
their special places in hydraulic design, but where the
design specifications permit the proper use of
O-ring seals, they will be found to give long and
dependable service.
(1)
Introduction
5700 Handbook
Seals
Introduction
5700 Handbook
Pressure
Wiper O-ring
O-ring Seal
Vent
Cut in two to
prevent pressure
trap
Seals
Introduction
5700 Handbook
Molded shapes consist of homogenous rubber parts functioning as sealing devices in both dynamic and static
applications. Relying on Parker custom designed seals can
mean total sealing, cost reduction, fast service, and quality
assurance to you. Contact the Parker O-Ring Division for
more specific information on the availability of custom
molded shapes.
Design Assistance
Our engineers will review your application, study all factors involved such as temperatures, pressures, gland design, bolt torque, surface finish, etc., and suggest several
alternate designs. They will work with you in researching
and testing those selected until the best possible seal is
achieved, based on performance and low manufacturing
cost.
Compound Development
Although the geometric configuration of the seal is critical, it
is also very important to select the most appropriate compound
for the specific application. Even though Parker has many
compounds available, we are always ready to develop a special
compound having its own distinct properties tailored to the
needs of a particular application. To insure that these physical
properties are achieved with each batch of material, Parker has
Static
Moving
Periodic
Adjustment
Required
O-ring
No
Medium
Close
No
Small
T-Seal
No
Medium
Fairly Close
No
Small
U-Packing
No
Low
Close
No
Small
V-Packing
Yes
Medium
Fairly Close
Yes
Large
No
Medium
Close
Yes
Medium
Flat Gasket
Yes
No
Large
Compression or
Jam Packing
Yes
High
Fairly Close
Yes
Large
Applications
Type
Moving
Friction
Tolerances
Required
(Moving Seals)
Gland
Adapters
Required
Space
Requirements
1-7
Seals
Introduction
5700 Handbook
1. Study the Basic O-ring Elastomers and O-ring Applications Sections (II and III, respectively) to see how a
compound is selected, learn the effects of various environments on them, and become familiar with those considerations that apply to all O-ring seal glands.
3. Find the recommended O-ring size and gland dimensions in the appropriate design table in Static O-Ring
Sealing or Dynamic O-Ring Sealing, Sections IV and V,
respectively.
1-8
Seals
Introduction
5700 Handbook
Seal Type
2.
Fluid Sealed
(In sequence if multiple)
A.
B.
C.
D.
Material Spec.
3.
Temperature
High
Low
Working
4.
Pressure
High
Low
Working
5.
Applied Pressure
Uni-Directional
Steady
Surge
Bi-Directional
Fluctuating
Frequency
OD
Finish
Material
ID
Finish
Material
Finish
Material
Dirt
Lint
Lube
Twisted
Blind
Pinching
6.
Gland Dimensions
8.
Assembly Problems
Over Threads
Corners, Holes, Etc.
MOVING SEALS
9.
Length of Stroke
(Reciprocating)
Arc of Travel
(Oscillating)
Frequency
(Oscillating or Reciprocating)
No
Eccentricity
Max.
Min.
Breakaway
Running
15. Lubrication
By Fluid Sealed
External
16. Cleanliness
Protected
Open
Bad
17. Please include a drawing or sketch if needed to clarify the assembly, and add any other pertinent information.
NOTE: For O-rings molded of compounds having other than standard shrinkage, determine the finished dimensions and tolerances as
described in the Appendix (Section X).
Seals
5700 Handbook
Section II
Basic O-Ring Elastomers
2.0 Elastomers ............................................................................................................................................... 2-3
2.1 Introduction to Elastomers ............................................................................................................... 2-3
2.1.1 Polymer ..................................................................................................................................... 2-4
2.1.2 Rubber ...................................................................................................................................... 2-4
2.1.3 Elastomer .................................................................................................................................. 2-4
2.1.4 Compound ................................................................................................................................ 2-4
2.2 Basic Elastomers for O-Ring Seals .................................................................................................. 2-4
2.2.1 Acrylonitrile-Butadiene (NBR) ................................................................................................ 2-4
2.2.2 Carboxylated Nitrile (XNBR) .................................................................................................. 2-5
2.2.3 Ethylene Acrylate (AEM) ......................................................................................................... 2-5
2.2.4 Ethylene Propylene Rubber (EPM, EPDM) ............................................................................. 2-5
2.2.5 Butyl Rubber (IIR) ................................................................................................................... 2-6
2.2.6 Butadiene Rubber (BR) ............................................................................................................ 2-6
2.2.7 Chlorobutyl Rubber (CIIR) ...................................................................................................... 2-6
2.2.8 Chloroprene Rubber (CR) ........................................................................................................ 2-6
2.2.9 Chlorosulfonated Polyethylene (CSM) .................................................................................... 2-7
2.2.10 Epichlorohydrin (CO, ECO) ................................................................................................... 2-7
2.2.11 Fluorocarbon (FKM, FPM) .................................................................................................... 2-7
2.2.12 Fluorosilicone (FVMQ) .......................................................................................................... 2-8
2.2.13 Hydrogenated Nitrile (HNBR) ............................................................................................... 2-8
2.2.14 Perfluoroelastomer (FFKM) ................................................................................................... 2-8
2.2.15 Polyacrylate (ACM) ............................................................................................................... 2-8
2.2.16 Polyurethane (AU, EU) .......................................................................................................... 2-9
2.2.17 Silicone Rubber (Q, MQ, VMQ, PVMQ) .............................................................................. 2-9
2.2.18 Styrene-Butadiene (SBR) ....................................................................................................... 2-9
2.2.19 Tetrafluoroethylene-Propylene (AFLAS) (FEPM) ............................................................. 2-10
2.3 Compound Selection ...................................................................................................................... 2-10
2.3.1 Selection of Base Polymer ..................................................................................................... 2-10
2.4 Physical and Chemical Characteristics........................................................................................... 2-12
2.4.1 Resistance to Fluid ................................................................................................................. 2-12
2.4.2 Hardness ................................................................................................................................. 2-13
2.4.3 Toughness ............................................................................................................................... 2-13
2.4.4 Tensile Strength ...................................................................................................................... 2-13
2.4.5 Elongation............................................................................................................................... 2-16
2.4.6 O-Ring Compression Force .................................................................................................... 2-16
2.4.7 Modulus .................................................................................................................................. 2-16
2.4.8 Tear Resistance ....................................................................................................................... 2-16
2.4.9 Abrasion Resistance................................................................................................................ 2-17
2.4.10 Volume Change ..................................................................................................................... 2-17
2-1
Seals
5700 Handbook
2-2
Seals
5700 Handbook
BASIC O-RING
ELASTOMERS
2.0 Elastomers
The basic core polymer of an elastomeric compound is
called a rubber, produced either as natural gum rubber in the
wild, on commercial rubber plantations or manufactured
synthetically by the chemical industry. Today, more than
32 synthetic rubbers are known, the most important ones
being listed in Table 2-1 (on the following page).
Modern elastomeric sealing compounds generally contain
50 to 60% base polymer and are often described simply as
rubber. The balance of an elastomer compound consists
of various fillers, vulcanizing agents, accelerators, aging
retardants and other chemical additives which modify and
improve the basic physical properties of the base polymer
to meet the particular requirements of a specific application.
Elastomers used in producing seals, and particularly, those
used in O-rings, will usually provide reliable, leak-free
function if fundamental design requirements are observed.
Cross-linking between the polymer chains is formed
during the vulcanization process, see Figure 2-1. Crosslinking of the molecules changes the rubber from a plasticlike material to an elastic material.
After vulcanization, including any required post-cure, an
elastomer compound attains the physical properties
Plastomer
no cross-links
Elastomer
cross-linked
ACM
CSM
EPDM
EPDM
FPM
FEPM
ACM
AEM
CSM
EPDM
EPM
FKM
FEPM
FFKM
CO
ECO
CO
ECO
BR
CR
IIR
CIIR
IR
NBR
SBR
XNBR
BR
CR
IIR
CIIR
IR
NBR
SBR
HNBR
XNBR
FMQ
PMQ
PMVQ
MQ
VMQ
FVMQ
PMQ
PVMQ
MQ
VMQ
AU
EU
AU
EU
Seals
Abbreviation
DIN/ISO ASTM
1629 D1418
Chemical
Name
5700 Handbook
2.1.2 Rubber
Rubber-like materials first produced from sources other
than rubber trees were referred to as synthetic rubber.
This distinguished them from natural gum rubber. Since
then, usage in the industry has broadened the meaning of
the term rubber to include both natural as well as synthetic materials having rubber-like qualities. This handbook uses the broader meaning of the word rubber.
2.1.3 Elastomer
Though elastomer is synonymous with rubber, it is
formally defined as a high molecular weight polymer that
can be, or has been modified, to a state exhibiting little
plastic flow and rapid, and nearly complete recovery from
an extending or compressing force. In most instances we
call such material before modification uncured or unprocessed rubber or polymer.
When the basic high molecular weight polymer, without the
addition of plasticizers or other dilutents, is converted by
appropriate means to an essentially non-plastic state and tested
at room temperature, it usually meets the following requirements in order to be called an elastomer:
A. It must not break when stretched approximately 100%.
B. After being held for five minutes at 100% stretch, it must
retract to within 10% of its original length within five minutes
of release.
Note: Extremely high hardness/modulus materials generally do not exhibit these properties even though they are
still considered elastomers.
The American Society for Testing and Materials (ASTM)
uses these criteria to define the term elastomer.
2.1.4 Compound
A compound is a mixture of base polymer and other
chemicals that form a finished rubber material. More precisely, a compound refers to a specific blend of chemical
ingredients tailored for particular required characteristics
to optimize performance in some specific service.
2-4
Seals
5700 Handbook
Swelling in
IRM 903 oil
90
3o
il
ility
xib
fle
d
l
co
Decrease
Increase
IR
M
Sw
ell
ing
20
30
40
Acrylonitrile Content in %
50
Cold flexibility
Depending on individual compound, between -18C
and -48C (0F and -55F).
Chemical resistance
Aliphatic hydrocarbons (propane, butane, petroleum
oil, mineral oil and grease, Diesel fuel, fuel oils)
vegetable and mineral oils and greases.
HFA, HFB and HFC fluids.
Many diluted acids, alkali and salt solutions at low
temperatures.
Water (special compounds up to 100C) (212F).
Not compatible with:
Fuels of high aromatic content (for flex fuels a special
compound must be used).
Aromatic hydrocarbons (benzene).
Chlorinated hydrocarbons (trichlorethylene).
Polar solvents (ketone, acetone, acetic acid, ethyleneester).
Strong acids.
Brake fluid with glycol base.
Seals
5700 Handbook
Chloroprene was the first synthetic rubber developed commercially and exhibits generally good ozone, aging and
chemical resistance. It has good mechanical properties over
a wide temperature range.
Heat resistance
Up to approximately 121C (250F).
Cold flexibility
Down to approximately -40C (-40F).
Chemical resistance
Paraffin base mineral oil with low DPI, e.g. ASTM oil
No. 1.
Silicone oil and grease.
Water and water solvents at low temperatures.
Refrigerants
Ammonia
Carbon dioxide
Improved ozone, weathering and aging resistance compared with NBR.
Limited compatibility
Naphthalene based mineral oil (IRM 902 and IRM 903
oils).
Low molecular aliphatic hydrocarbons (propane,
butane, fuel).
Glycol based brake fluids.
Not compatible with:
Aromatic hydrocarbons (benzene).
Chlorinated hydrocarbons (trichloroethylene).
Polar solvents (ketones, esters, ethers, acetones).
2-6
Seals
5700 Handbook
Cold flexibility
Down to approximately -40C (-40F).
Chemical resistance
Mineral oil and grease.
Aliphatic hydrocarbons (propane, butane, fuel).
Silicone oil and grease.
Limited compatibility
Low molecular aliphatic hydrocarbons (propane, butane, fuel).
Mineral oil and grease.
Limited swelling in aliphatic oils (ASTM oil No. 1).
High swelling in naphthene and aromatic base oils
(IRM 902 and IRM 903 oils).
Polar solvents (acetone, methyl ether, ketone, ethyl
acetate, diethyl ether, dioxane).
Phosphate-ester based fluids.
Heat resistance
Up to approximately 135C (275F).
Fluorocarbon (FKM) has excellent resistance to high temperatures, ozone, oxygen, mineral oil, synthetic hydraulic
fluids, fuels, aromatics and many organic solvents and
chemicals. Low temperature resistance is normally not
favorable and for static applications is limited to approximately -26C (-15F) although in certain situations it is
suitable down to -40C (-40F). Under dynamic conditions,
the lowest service temperature is between -15C and -18C
(5F and 0F).
Gas permeability is very low and similar to that of butyl
rubber. Special FKM compounds exhibit an improved
resistance to acids, fuels, water and steam.
Heat resistance
Up to 204C (400F) and higher temperatures with
shorter life expectancy.
Cold flexibility
Down to -26C (-15F) (some to -40C) (-40F).
Chemical resistance
Mineral oil and grease, low swelling in ASTM oil No.
1, and IRM 902 and IRM 903 oils.
Non-flammable hydraulic fuels in the group HFD.
Silicone oil and grease.
Mineral and vegetable oil and grease.
Aliphatic hydrocarbons (fuel, butane, propane, natural
gas).
Aromatic hydrocarbons (benzene, toluene).
Chlorinated hydrocarbons (trichlorethylene and carbon tetrachloride).
Fuels, also fuels with methanol content.
High vacuum.
Very good ozone, weather and aging resistance.
Not compatible with:
Glycol based brake fluids.
Ammonia gas, amines, alkalis.
Superheated steam.
Low molecular organic acids (formic and acetic acids).
2-7
Seals
5700 Handbook
2-8
Seals
5700 Handbook
Heat resistance
Up to approximately 204C (400F) (special compounds up to 232C (450F).
Cold flexibility
Down to approximately -59C to -54C (-75F to
-65F) with special compounds down to -115C
(-175F).
Chemical resistance
Mineral oil (engine, gear box, ATF oil).
Ozone, weather and aging resistance.
Not compatible with:
Glycol based brake fluid.
Aromatics and chlorinated hydrocarbons.
Hot water, steam.
Acids, alkalis, amines.
Chemical resistance
Engine and transmission oil (e.g.: ASTM oil No.1).
Animal and vegetable oil and grease.
Brake fluid (non-petroleum base).
Fire-resistant hydraulic fluid, HFD-R and HFD-S.
High molecular weight chlorinated aromatic hydrocarbons (including flame-resistant insulators, and coolant for transformers).
Moderate water resistance.
Diluted salt solutions.
Ozone, aging and weather resistant.
Not compatible with:
Superheated water steam over 121C (250F).
Acids and alkalis.
Low molecular weight chlorinated hydrocarbons
(trichloroethylene).
Aromatic mineral oil.
Hydrocarbon based fuels.
Aromatic hydrocarbons (benzene, toluene).
Heat resistance
Up to approximately 107C (225F).
Cold flexibility
Down to approximately -57C (-70F).
Compatible with
Water, alcohol, glycol and certain ketones (acetone).
Non-mineral oil based brake fluid.
Silicone oil and grease.
Diluted water solutions, weak acids.
2-9
Seals
5700 Handbook
P = Polyurethane
S = silicone
V = fluorocarbon, perfluorelastomer, AFLAS
Y = epichlorohydrin
Z = exotic or specialty blends
EXAMPLE:
N
= acrylonitrile-butadiene or simply nitrile
0674 = individual sequential compound identifier
-70 = nominal Shore A hardness
Heat resistance
Up to approximately 232C (450F).
Cold flexibility
Down to approximately -4C (25F).
Compatible with
Bases.
Phosphate Esters.
Amines.
Engine Oils.
Steam.
Pulp and paper liquors.
Not compatible with:
Aromatic Fuels.
Ketones.
Carbon Tetrachloride.
2-10
Seals
N0674-70 where
5700 Handbook
C -100
F -148
-75
-103
-50
-58
-25
-13
0
32
25
77
50
122
75
167
100
212
125
257
150
302
175
347
200
392
225
437
250
482
300
572
Temperature C
Normal recommended temperature range
Seals
5700 Handbook
Parker Compound
Prefix Letter
Abrasion Resistance
Acid Resistance
Chemical Resistance
Cold Resistance
Dynamic Properties
Electrical Properties
Flame Resistance
Heat Resistance
Impermeability
Oil Resistance
Ozone Resistance
Set Resistance
Tear Resistance
Tensile Strength
Water/Steam Resistance
Weather Resistance
AFLAS (TFE/Prop)
GE
PF
FG
GE
Butadiene
FG
FG
GE
FG
Butyl
FG
GE
FG
GE
Chlorinated
Polyethylene
FG
PF
GE
FG
FG
Chlorosulfonated
Polyethylene
FG
Epichlorohydrin
FG
GE
FG
FG
GE
PF
Ethylene
Acrylic
FG
PF
Ethylene
Propylene
GE
GE
GE
GE
GE
GE
Fluorocarbon
PF
GE
GE
GE
FG
Fluorosilicone
FG
GE
GE
Isoprene
FG
FG
GE
FG
Natural Rubber
FG
FG
GE
FG
Neoprene
FG
FG
FG
FG
GE
FG
HNBR
FG
GE
GE
FG
Nitrile or Buna N
FG
GE
GE
FG
GE
FG
Perfluorinated
Fluoroelastomer
PF
PF
FG
GE
Polyacrylate
FG
Polysulfide
Polyurethane
FG
FG
GE
SBR or Buna S
FG
FG
FG
GE
FG
Silicone
FG
GE
FG
GE
P - Poor
F- Fair
G- Good
E- Excellent
Elastomer
Type
(Polymer)
Seals
5700 Handbook
2.4.2 Hardness
Throughout the seal industry, the Shore A type durometer
scale, manufactured by a variety of manufacturers, is the
standard instrument used to measure the hardness of most
rubber compounds. It should be noted that there are other
hardness scales used to describe elastomers (B, C, D, DO,
O, OO) but these are typically not used by the seal industry.
The durometer has a calibrated spring which forces an
indentor point into the test specimen against the resistance
of the rubber. There is an indicating scale on which the
hardness is then read directly. It is calibrated to read 100 if
there is no penetration, as on a flat glass or steel surface.
(For specimens that are too thin or provide too small an area
for accurate durometer readings, Micro Hardness Testing is
recommended).
In the O-ring industry there is another hardness scale that is
used due to the curved surface of the O-ring cross-section
causing problems with accurately reading Shore A. The
scale is IRHD (International Rubber Hardness Degrees).
The size and shape of the indentor used in IRHD readings
is much smaller, thus allowing for more accurate measurements on curved surfaces such as an O-ring cross-section.
Unfortunately, there is not a direct correlation between the
readings of Shore A and IRHD Scales.
Softer sealing materials, with lower hardness readings, will
flow more easily into the microfine grooves and imperfections of the mating parts (the gland, bore, rod or seal
flanges). This is particularly important in low-pressure
seals because they are not activated by fluid pressure.
Conversely, the harder materials offer greater resistance to
extrusion. Referring back to the O-ring seal diagrams,
Figures 1-4 through 1-7, it can be seen that a harder O-ring
will have greater resistance to extrusion into the narrow gap
between the piston and bore. There are certain applications
in which the compressive load available for assembly is
limited. In these situations, Figures 2-4 through 2-8 are
helpful, providing compression load requirements for
O-rings of different hardnesses, for each of the five standard O-ring cross-sections.
2.4.3 Toughness
Toughness is not a measured property or parameter but
rather a qualitative term frequently used to summarize the
combination of resistance to physical forces other than
chemical action. It is used as a relative term in practice. The
following six terms (paragraphs 2.4.4 through 2.4.9) are
major indicators of, and describe the toughness of a
compound.
2-13
Seals
5700 Handbook
70
60
50
90
80
70
Ha
rd
ne
ss
60
50
90
Sh
or
e
Percent Compression
30%
20%
80
70
60
50
90
80
10%
70
60
50
90
80
5%
70
60
50
.1
.2
.3
.4 .5 .6 .7.8.91
5 6 7 8 9 10
5 6 7 8 9 100
5 6 7 8 9 1000
5 6 7 8 9 1000
70
60
50
90
80
70
Ha
rd
ne
ss
60
50
90
Sh
or
e
Percent Compression
30%
20%
80
70
60
50
90
80
10%
70
60
50
90
80
5%
70
60
50
.1
.2
.3
.4 .5 .6 .7.8.91
5 6 7 8 9 10
5 6 7 8 9 100
Seals
5700 Handbook
70
60
50
90
80
Ha
rd
ne
ss
70
60
50
Sh
or
e
Percent Compression
30%
90
80
20%
70
60
50
90
80
10%
70
60
50
90
80
5%
70
60
50
.1
.2
.3
.4 .5 .6 .7.8.91
5 6 7 8 9 10
5 6 7 8 9 100
5 6 7 8 9 1000
5 6 7 8 9 1000
70
60
50
90
80
60
50
Ha
rd
ne
ss
70
90
Sh
or
e
Percent Compression
30%
20%
80
70
60
50
90
80
10%
70
60
50
90
80
5%
70
60
50
.1
.2
.3
.4 .5 .6 .7.8.9 1
5 6 7 8 9 10
5 6 7 8 9 100
Seals
5700 Handbook
70
60
50
90
80
70
50
90
Ha
rd
ne
ss
60
80
Sh
or
e
Percent Compression
30%
20%
70
60
50
90
80
10%
70
60
50
90
80
5%
70
60
50
.1
.2
.3
.4 .5 .6 .7.8.91
5 6 7 8 9 10
5 6 7 8 9 100
5 6 7 8 9 1000
2.4.5 Elongation
2.4.7 Modulus
2-16
Seals
5700 Handbook
Volume Change %
Set % of Original
Deflection
Air
Fluorolube
Fluoroester
+19.5
-0.4
25.4
20.7
swell (see Table 2-3), (2) absorbed fluid may have somewhat the same effect on a compound as the addition of
plasticizers, softening and thus providing more seal flexibility at the low temperature end of its operating range.
These potential good effects however, should not be
relied on when choosing a compound for an application.
Awareness of these facts is of interest as they can and
frequently do contribute to enhanced seal performance.
The amount of volume swell after long-term immersion
stabilized volume is seldom reported because it takes
several readings to identify. The usual 70-hour ASTM
immersion test will indicate a swelling effect, whereas a
long-term test shows shrinkage. Thus swell indicated by
short-term testing may only be an interim condition.
Shrinkage or decrease in volume is usually accompanied by
an increase in hardness. Also, just as swell compensates for
compression set, shrinkage will intensify the compression
set effect causing the seal to pull away from sealing
surfaces, thus providing a leak path. It is apparent then, that
shrinkage is far more critical than swell. More than 3 or 4%
shrinkage can be serious for moving seals. In some instances, fluids present may extract plasticizers, causing the
seal to shrink when the fluid is temporarily removed from
contact with the seal, as by draining a valve body (dry- out
shrinkage). Such shrinkage may or may not be serious;
depending on its magnitude, gland design, and the degree
of leakage tolerable before the seal re-swells and regains its
sealing line of contact. However, even if the seal does reswell there is the danger that it may not properly reseat
itself. If any shrinkage is a possibility in an application, it
must be considered thoroughly and carefully.
2-17
Seals
5700 Handbook
Note that in air and in the fluid that caused slight shrinkage, the compound took a set of approximately 20 to 25%.
In the fluid that caused a 20% swell, there was no measurable compression set. The condition most to be feared is
the combination of high compression set and shrinkage.
This will always lead to seal failure unless exceptionally
high squeeze is employed. See Figures 2-10 through 2-13.
Deflection = to-ts
Return
Compression
Set = to-ti
Original
Thickness
to
Spacer
Bar
Example: to = 0.200 ts = 0.150 ti = 0.190
(ASTM normally requires
deflection equal to 1/4 to)
Recovered
Thickness
ti
Compression Set (As Percent of Original Deflection)
C=
to - ti
X 100
to - ts
100
90
Silicone
VMQ 70
70
1
60
2
80
Compression Set
Test at
T = 100C (212F)
t = 70 h
Cross-Section
^
1=
1.80 mm (.07 in.)
^
2=
7.00 mm (.28 in.)
50
40
50
1
40
2
30
20
20
10
10
10
20
30
40
Cross-Section Deformation (%)
10
20
30
40
Cross-Section Deformation (%)
Seals
Compression Set
Test at
T = 100C (212F)
t = 70 h
Cross-Section
^
1=
1.80 mm (.07 in.)
^
2=
3.55 mm (.14 in.)
^
3=
7.00 mm (.28 in.)
60
30
NitrileButadiene
NBR 70
70
80
5700 Handbook
50
Compression Set
Test at
t = 70 h
40
NBR 70-1
(Normal Temperature NBR)
NBR 70-2
(High Temperature NBR)
1
30
2
20
O-Ring Cross-Section
Deformed by 25%
Cross-Section = 3.55 mm
(.14 in.)
10
C
F
100
125
150
212
257
302
Test Temperature
Compression Set
Test at
t = 70 h
70
FKM 1
ACM 2
EPDM 3
VMQ 4
60
50
O-Ring Cross-Section
Deformed by 25%
Cross-Section = 3.55 mm
(.14 in.)
40
30
3
20
4
1
100
212
125
150
175
257
302
347
Test Temperature
10
C
F
200
392
Seals
5700 Handbook
95
Nitrile
Fl
uo
ro
ca
rb
on
Ethy
lene
-Pro
pyle
ne
Silicone
90
85
80
75
Neopre
ne
70
Nitr
ile
Nit
rile
55
2.4.13 Resilience
Resilience is essentially the ability of a compound to return
quickly to its original shape after a temporary deflection.
Reasonable resilience is vital to a moving seal. Resilience
is primarily an inherent property of the elastomer. It can be
improved somewhat by compounding. More important, it
can be degraded or even destroyed by poor compounding
techniques. It is very difficult to create a laboratory test
which properly relates this property to seal performance.
Therefore, compounding experience and functional testing
under actual service conditions are used to insure adequate
resilience.
2.4.14 Deterioration
This term normally refers to chemical change of an elastomer resulting in permanent loss of properties. It is not to
be confused with reversible or temporary property losses.
Both permanent and temporary property losses may be
accompanied by swell. The temporary condition is due to
physical permeation of fluid without chemical alteration.
2.4.15 Corrosion
65
60
Fluorosilicone
50
F -70 -60 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80
C -57 -51 -46 -40 -34 -29 -23 -18 -12 -7 -1 4 10 16 21 27
Temperature
Seals
5700 Handbook
2.4.16 Permeability
Permeability is the tendency of gas to pass or diffuse
through the elastomer. This should not be confused with
leakage which is the tendency of a fluid to go around the
seal. Permeability may be of prime importance in vacuum
service and some few pneumatic applications involving
extended storage but is seldom consequential in other
applications. It should be understood that permeability
increases as temperatures rise, that different gases have
different permeability rates, and that the more a seal is
compressed, the greater its resistance to permeability.
Refer to O-Ring Applications, Section III for additional
information on permeability and vacuum service.
2-21
Seals
5700 Handbook
For shielding purposes against electromagnetic interference (EMI), compounds filled with conductive-particles
have been developed with a volume resistivity of < 10-2
Ohm- cm.
Material
Nitrile
General Purpose
Neoprene
Fluorocarbon
Elastomer
Kel-F
Ethylene Propylene
Silicone
Low-Temperature
Type Silicone
Fluorosilicone
High-Temperature
Type Aluminum,
2017
Stainless Steel,
Type 302
Steel, Mild
Invar
Contraction
Expansion
24C to -54C 24C to 191C Coefficient
(75F to -65F) (75 to 375F) of Expansion
(in./ft.)
(in./ft.)
(in./in./F)
.108
.132
.224
.274
6.2 x 10-5
7.6 x 10-5
.156
.144
.155
.174
.324
.299
.320
.360
9.0 x 10-5
8.3 x 10-5
8.9 x 10-5
1.0 x 10-4
.193
N/A
.396
N/A
1.1 x 10-4
4.5 x 10-4
.023
.047
1.3 x 10-5
.017
.012
.001
.035
.024
.002
9.6 x 10-6
6.7 x 10-6
6.0 x 10-7
NBR
FKM
VMQ
Force
EPDM
CR
10
104
106
108
1010
1012
Ohm-cm
1014
1016
1018
1020
0
10
15
20
25
30
35
40
45
Gland Void After Seal Compression Percent
Seals
50
5700 Handbook
2.6 Aging
Deterioration with time or aging relates to the basic nature
of the rubber molecule. It is a long chain-like structure
consisting of many smaller molecules joined or linked
together. Points at which individual molecules join are
called bonds. Bond sites and certain other areas may be
particularly susceptible to chemical reaction. At least three
principle types of such reactions are associated with aging.
They usually occur concurrently, but in varying degrees:
a. Scission The molecular bonds are cut, dividing the
chain into smaller segments. Ozone, ultra-violet light, and
radiation cause degradation of this type.
b. Crosslinking An oxidation process whereby additional intermolecular bonds are formed. This process may
be a regenerative one. Heat and oxygen are principle causes
of this type of aging process.
2-23
Seals
5700 Handbook
2.7 Storage
The effective storage life of an O-ring varies with the
inherent resistance of each individual elastomer to normal
storage conditions. ARP 5316 places elastomers into three
groups according to Age resistance generally associated
with products fabricated from various rubbers. Realize
that this document, ARP 5316, is an Aerospace Recommended Practice, not a standard that must be met.
Where non-age sensitive elastomers are involved, considerable storage life without detectable damage is common
even under adverse conditions. For materials falling into
the 15 year category, which are subject to age deterioration,
the following conditions are suggested for maximum life:
1. Ambient temperature not exceeding 49C (120F)
2. Exclusion of air (oxygen)
3. Exclusion of contamination
4. Exclusion of light (particularly sunlight)
5. Exclusion of ozone generating electrical devices
6. Exclusion of radiation
Generally, sealed polyethylene bags stored in larger cardboard containers or polyethylene lined craft paper bags
insure optimal storage life. However, in normal warehousing conditions, life of even the relatively age-sensitive
elastomers is considerable. This is due to major improvements in modern compounding technique, and has been
documented through a number of investigations concerned
with effects of long-term storage of elastomeric materials
undertaken in the recent past. These include controlled
laboratory studies of many years duration in addition to
evaluation of seals recovered from salvaged World War II
aircraft and other sources after exposure to widely varying
conditions over many years.
2.10 Shrinkage
All rubber compounds shrink to some extent during the
molding process. The finished elastomeric part will be
smaller than the mold cavity from which it was formed.
Exactly how much smaller the part is we call the shrinkage
factor. The basic nitrile polymer was one of the first
synthetic polymers produced. As a result, it has become the
standard or measuring stick for shrinkage variations
between polymer families. This standard shrinkage factor
is often called AN shrinkage. For other compounds,
individual shrinkage factors can lead to different tolerances
and, thus, different designs. If, with the variation of compound and hardness, the ability to fall within expected
dimensional tolerances is compromised, is necessary to
manufacture compensating mold tooling in order to remain
within the specified tolerances, whatever they may be.
For more information on shrinkage, see Shrinkage in the
Appendix, Section X.
2-24
Seals
5700 Handbook
2-25
Seals
5700 Handbook
IRM 903 (formally ASTM Oil No. 3) has a low aniline point
70C (157F) and causes high or extreme swelling of seal
compounds.
3.2
4.7
6.9
7.9
8.1
8.7
9.5
10.2
10.4
13.5
13.6
15.0
15.7
16.0
17.3
17.5
20.0
24.0
33.9
35.5
+15
+10
+5
(+2)
0
10
15
20
25
30
-5
-10
Elastomer Compatibility Index (ECI) for Mineral Oils
Based on Standard Elastomer NBR No. 1
Percent Volume Change
2-26
Seals
+20
2.2
3.7
5.9
6.9
7.1
7.7
8.5
9.2
9.4
12.5
12.6
14.0
14.7
15.0
16.3
16.5
19.0
23.0
32.9
34.5
ECI
5700 Handbook
1 = A 607-70, 2 = N 3570-70
^
24
24
20
20
16
12
1
8
4
0
-4
-8
^
^
1=
N 741-75, 2 =
N 674-70
2.13.1 Fluid
16
1
12
8
4
0
-4
12 16 20 24 28 32 36
ECI
-8
12 16 20 24 28 32 36
ECI
Seals
52
48
44
40
36
32
28
24
20
16
12
8
4
0 4
12 16 20 24 28 32 36
Weight Change
on Test Elastomer NBR 1 (%)
5700 Handbook
2.13.2 Temperature
Temperature ranges are often over-specified. For example,
a torch or burner might reach temperatures of 400C to
540C (750F to 1000F). However, the tanks of gas being
sealed may be located a good distance from this heat source
and the actual ambient temperature at the seal might be as
low as 121C to 149C (250F to 300F).
A specification for aircraft landing gear bearing seals might
call out -54C to 760C (-65F to 1400F), yet the bearing
grease to be sealed becomes so viscous at -54C (-65F) it
cannot possibly leak out. At the high end, there is a timetemperature relationship in the landing rollout that allows
rapid heat dissipation through the magnesium wheel hous-
C -100
F -148
-75
-103
-50
-58
-25
-13
0
32
25
77
50
122
75
167
100
212
125
257
150
302
175
347
200
392
225
437
250
482
300
572
Temperature C
Normal recommended temperature range
Seals
5700 Handbook
2.13.3 Time
The three obvious dimensions in sealing are fluid, temperature, and pressure. The fourth dimension, equally important, but easily overlooked, is time.
100
90
80
70
Retraction %
60
With decreasing temperature, elastomers shrink approximately ten times as much as surrounding metal parts. In a
rod type assembly, whether static or dynamic, this effect
causes the sealing element to hug the rod more firmly as the
temperature goes down. Therefore, an O-ring may seal
below the recommended low temperature limit when used
as a rod type seal.
When excessive side loads are encountered on maximum
tolerance rods or glands, and the pressure is in the low
range, leakage may occur at temperatures 5or 8C (10or
15F) above the TR-10 value. It may be necessary to add as
much as 22C (40F) to the low temperature shown in the
tables for this type of service. See Figure 2-24.
50
40
30
20
10
C -60
F -76
-40
-40
0
32
10
50
20
68
2-29
Seals
-50
-58
5700 Handbook
80
Compound: NBR 80
60
40
20
0
C -50
F -58
-40
-40
-30
-22
-20
-4
-10
14
0
32
10
20
50
68
Temperature
30
86
40
40
50
104
60
122
70
140
80
176
Temperature C (F)
482
(900)
General Temperature
Limits of Basic
Elastomer Compounds
427
(800)
371
(700)
316
(600)
Fluo
roela
stom
er
260
(500)
Ethy
lene
Prop
ylen
e&
204
(400)
Silicone
Neo
pren
e
149
(300)
93
(200)
38
(100)
0
0.1
0.5
1.0
5.0
10
Exposure Time Hours
50
100
500
1000
Seals
5700 Handbook
2.13.4 Pressure
Butadiene, chlorosulfonated polyethylene, isoprene, natural rubber, and a few other elastomers do not generally
perform as well as the listed polymers in seal applications,
and Parker does not normally offer O-rings in these materials.
See Table 2-2 for comparison of similar properties by
polymer family.
2.16 Testing
An elastomer is seldom under the same confinement conditions when laboratory physical property tests are made as
when installed as a seal. The usual compression, lack of
tension, and limited room for expansion when installed, all
result in a different physical response from what is measured on an identical but unconfined part.
Example: A silicone compound tested in hydrocarbon fuel
in the free state may exhibit 150% swell. Yet seals of such
a compound confined in a gland having volume only 10%
larger than the seal, may well perform satisfactorily. Complete immersion may be much more severe than an actual
application where fluid contact with the seal is limited
through design. The service could involve only occasional
splash or fume contact with the fluid being sealed. Different
parts made from the same batch of compound under identical conditions will give varying results when tested in
exactly the same way because of their difference in shape,
thickness, and surface to volume relationship (see Figure 225). Humidity alone has been found to affect the tensile
strength of some compounds.
Correlation between test data and service conditions is not
a simple problem; it is an industry-wide problem. Until
improvement can be made, manufacturers and users must
use the available data to the best of their ability. In essence,
it is the misapplication of data, not the measurements,
which causes difficulty. However, with data in some other
form, such misapplication might be greatly reduced. ASTM
Designation D471 (Standard Method of Test for Change in
Properties of Elastomeric Vulcanizates Resulting from
Immersion in Liquids) states: In view of the wide variations often present in service conditions, this accelerated
test may not give any direct correlation with service perfor-
2-31
Seals
5700 Handbook
2.17 Specifications
Specifications are important, but so is progress. Therefore,
even though it may be more difficult to prepare, a performance specification is recommended. This allows new
developments and improvements to be adopted without any
appreciable effect on the specification.
Avoid specifying how to compound materials or process
compounds. Let the seal manufacturer examine the performance desired. A vendor should be allowed to supply his
best solution to a problem. It is not only possible, but also
probable that a well-qualified supplier knows of materials
and/or processes that will solve the problem and one should
be permitted to use them.
It must be recognized that physical properties provide a
means of screening new materials for an application by
setting realistic minimums. These can be established when
experience with certain properties gives a good indication
of the suitability of a new material for the application.
These properties also permit control of a material after it
has proven satisfactory for an application. Therefore, a
brief discussion of the main points that should be considered when preparing the physical and chemical test porRelative Effect of O-Ring Cross Section on Area
Exposed to Fluid Attack (Total Immersion)
60
50
40
30
Every well-written specification should contain both qualification and control sections. Although these two sections
may be combined in the actual specification, they are
discussed separately.
20
10
0
mm 0
Inch 0
2.5
3.8
5.1
.10
.15
.20
Cross Section (W)
6.4
.25
7.6
.30
Seals
5700 Handbook
c. Elongation
Investigate and determine the maximum amount of stretch
a seal must undergo for assembly in the application. Multiply this figure by 1.25 to allow a safety factor and to
provide for normal production variation of 20%.
a. Durometer
d. Modulus
b. Tensile Strength
Determine the minimum tensile strength necessary for the
application. Always take into consideration the inherent
strength of the elastomers most likely to be used to meet the
specification (most silicones have tensile strengths in the
e. Specific Gravity
A value for specific gravity should not be set in the
qualification section of the specification but the value
should be reported as determined. This value will then be
used in the control section.
10
6
MIL P-5516 Nitrile
Immersed in
MIL-H-5606 (J-43)
4
W
0.210
2
0.139*
0.275
Butyl Rubber
Immersed in
Skydrol 500A
0
0.103*
-2
0.070*
2-33
Seals
5700 Handbook
2-34
Seals
5700 Handbook
durometer with seal specimens rather than standard hardness discs, or platen plies.
A tolerance of 5 points is the standard allowance for
exper-imental error caused by reading techniques and production variance from batch to batch of the same compound. This tolerance is sometimes applied to the actual
qualification results. For example, if the qualification
section specified 70-durometer 5 and the qualification
value was a 68-durometer reading, the control section
would specify 68 5. This is the most desirable approach.
In some cases original qualification hardness and tolerance
remain in effect (i.e., both qualification and control values
of 70 5). This practice is more likely to result in unnecessary rejection of usable parts. Needless expense and much
higher prices may result.
b. Tensile Strength, a tolerance of 15% is standard for
any given compound. This tolerance was taken into consideration when establishing the tensile strength qualification
limit of 1200 psi for dynamic seals (see qualification
section, tensile strength). If a part qualified at the minimum,
82.8 Bar (1200 PSI), and the control tolerance is applied, it
is possible to receive a part with a tensile strength of 70.4
Bar (1020 PSI). This value, 70.4 Bar (1020 PSI), remains
above the (69 Bar (1,000 PSI) minimum that is usually
required for dynamic applications as previously stated.
c. Elongation, a tolerance of 20% is standard. Again this
must be taken into consideration as part of the safety factor,
when setting a limit for elongation for qualification.
d. Modulus, a tolerance of 20% is standard. This is a more
sensitive indicator of the condition of a compound than
either tensile strength or elongation.
e. Specific Gravity of a compound having been established
during qualification, a tolerance of .02 may be applied.
Specific gravity is the easiest and quickest control test
available to the industry today. It is also the most accurate
if the stringent .02 tolerance is applied. Specific gravity is
the only test some purchasers use.
f. Volume Change, a plus or minus tolerance on this
property is frequently unrealistic. A combination of variance in commercial fluids and sample size, gives such an
accumulation of negative factors that it is not always
feasible to use volume swell as a control. It can be done if,
(1) a controlled test fluid is used or control of the commercial fluid eliminates its variance, (2) time of the test is
extended, (3) a volume swell history over a long period of
time is established on every seal on which a check is
desired, and (4) when testing small size seals multiple
samples are used for each weighing, thus minimizing
inaccuracy (for example: if the balance being used is
accurate to .01 gram and a small seal with a weight of .03
gram is being tested, it is easy to see where an answer on this
size seal can be extremely inaccurate).
2-35
Seals
5700 Handbook
Compound
Per MIL-P-25732
138.0
(2000)
-57%
-46%
103.5
(1500)
-5%
Compound
Per MIL-R-7362
-10%
69.0
(1000)
34.5
(500)
Original
After Immersion
0
0
24
48
72
96
120
Immersion Time in MIL-L-7808 at 100C (212F) Hours
144
168
2-36
Seals
O-Ring Applications
5700 Handbook
Section III
O-Ring Applications
3.0 Introduction ............................................................................................................................................. 3-3
3.1 Factors Applying to All O-Ring Types ............................................................................................. 3-3
3.1.1 Compatibility ............................................................................................................................ 3-3
3.1.2 Temperature .............................................................................................................................. 3-4
3.1.3 Pressure ..................................................................................................................................... 3-4
3.1.4 Extrusion ................................................................................................................................... 3-4
3.1.5 Lubrication ............................................................................................................................... 3-5
3.1.5.1 Parker O-Lube .................................................................................................................. 3-5
3.1.5.2 Parker Super O-Lube ....................................................................................................... 3-5
3.1.5.3 Other Friction Reduction Methods .................................................................................. 3-6
3.1.5.4 Internal Lubrication ......................................................................................................... 3-6
3.2 Cleanliness ........................................................................................................................................ 3-6
3.3 Assembly .......................................................................................................................................... 3-6
3.4 Selecting the Best Cross-Section ...................................................................................................... 3-7
3.5 Stretch ............................................................................................................................................... 3-8
3.6 Squeeze ............................................................................................................................................. 3-8
3.7 Gland Fill .......................................................................................................................................... 3-9
3.8 O-Ring Compression Force .............................................................................................................. 3-9
3.9 Specific Applications ........................................................................................................................ 3-9
3.9.1 Automotive ............................................................................................................................... 3-9
3.9.2 Engine ..................................................................................................................................... 3-10
3.9.3 Brake System .......................................................................................................................... 3-10
3.9.4 Fuel System ............................................................................................................................ 3-10
3.9.5 Fuels for Automobile Engines ................................................................................................ 3-10
3.9.6 Transmission ........................................................................................................................... 3-11
3.9.7 Cooling & Heating Systems ................................................................................................... 3-11
3.9.8 Air Conditioning ..................................................................................................................... 3-12
3.9.9 Power Steering Systems ......................................................................................................... 3-12
3.9.10 Refrigeration and Air Conditioning ...................................................................................... 3-12
3.9.11 Food, Beverage and Potable Water ....................................................................................... 3-12
3.9.12 Aerospace Technology .......................................................................................................... 3-13
3.9.12.1 Jet Fuels ....................................................................................................................... 3-13
3.9.12.2 Liquid Rocket Propellants ........................................................................................... 3-13
3.9.13 Nuclear Technology .............................................................................................................. 3-14
3.9.14 Radiation ............................................................................................................................... 3-14
3.9.15 Chemical Processing/Oil Field Technology ......................................................................... 3-14
3-1
Seals
O-Ring Applications
5700 Handbook
3-2
Seals
O-Ring Applications
5700 Handbook
APPLICATIONS
3.0 Introduction
In designing an O-ring seal, it is best to determine the O-ring
compound first, as the selected compound may have significant influence on gland design parameters.
Essentially, the application determines the rubber compound; the primary factor being the fluid to be sealed. The
elastomer however, must also resist extrusion when exposed to the maximum anticipated system pressure and be
capable of maintaining good physical properties through
the full temperature range expected. In dynamic applications, the selected material must also have the toughness
and abrasion resistance so important in reciprocating and
rotary seals.
The Fluid Compatibility Tables in Section VII suggest
potential Parker Compounds for over two thousand different gases, fluids and solids. Normally, the Recommended
Parker O-Ring Compound indicated in the tables should
be the one specified for initial testing and evaluation.
In some instances, where there are two or more fluids to be
sealed, it may be necessary to compromise on a seal
material having the best overall resistance to all the fluids
involved. Whenever possible this should be a compound
rated 1 for all the fluids under consideration. For a static
seal application, a 2 rating is usually acceptable, but it
should, in all cases, be tested. Where a 2 rated compound
must be used, do not expect to re-use it after disassembly.
It may have degraded enough that it cannot safely be
reinstalled.
When a compound rated 3 is selected, be certain it is first
thoroughly tested under the full range of anticipated operating conditions. Some of these 3-rated compounds may
prove to be satisfactory as static seals, but many will not.
Note the operating temperature range of the chosen compound. The temperatures shown in Table 7-1 are general
temperature ranges, but the presence of a particular fluid
may modify the published limits. Remember, only appropriate testing can safely determine an acceptable O-ring
seal material.
3.1.1 Compatibility
Compatibility between the O-ring and the fluid or fluids to
be sealed must be the first consideration in the design
process. If the fluid will have an immediate adverse effect
3-3
Seals
O-Ring Applications
5700 Handbook
3.1.3 Pressure
Pressure has a bearing on O-ring seal design as it can affect
the choice of compound shore hardness. At very low
pressures, proper sealing may be more easily obtained with
lower durometer hardness (50-60 shore A). With higher
pressures, the combination of pressure and material shore
hardness determine the maximum clearance that may safely
be tolerated (see Figure 3-2). Cyclic fluctuation of pressure
can cause local extrusion of the O-ring resulting in nibbling (see Section VIII, Failure Analysis), particularly if
peak system pressures are high enough to cause expansion
of the cylinder wall. One remedy may be to stiffen the
cylinder to limit the expansion so that the bore to piston
clearance does not exceed a safe value.
3.1.2 Temperature
3.1.4 Extrusion
Extrusion of O-rings may also be prevented by the use of
anti-extrusion (back-up) devices. These are thin rings of
much harder material fitted into the gland between the seal
and the clearance gaps, which essentially provide zero
clearance. They are available in hard elastomer compounds,
leather, PTFE, Nylon and other similar materials. Parker
Limits for Extrusion
690.0
552.0
414.0
Such special designs for high and low temperature environments are seldom required. The minimum squeeze values
for the various O-ring cross-section diameters given in the
design charts of the static and dynamic seal design sections
are generally satisfactory.
10,000
8,000
6,000
276.0
4,000
207.0
3,000
138.0
2,000
Extrusion
69.0
55.2
1,000
800
41.4
600
No Extrusion
27.6
20.7
400
70
Hardness
Shore A
80 90
300
13.8
6.9
mm 0
In. 0
200
.3
.010
.5
.020
.8
.030
100
1.0
.040
O-Ring
Garter
Spring
Seals
O-Ring Applications
5700 Handbook
3.1.5 Lubrication
Lubrication of O-ring seals is extremely important for
installation and operation of dynamic seals as well as
proper seating of static seals. The general rule for use of
lubrication is: The greatest benefit in using a lubricant is
obtained during the initial installation of the O-ring.
Lubricants are commonly used on O-rings and other elastomeric seals. Using a suitable grease or oil during assembly helps protect the O-ring from damage by abrasion,
pinching, or cutting. It also helps to seat the O-ring properly, speeds up assembly operations, and makes automated
assembly line procedures possible. An additional benefit is
the protection that the lubricant provides as a surface film.
Proper lubrication also helps protect some polymers from
degradation by atmospheric elements such as ozone and its
3.1.5.1 Parker O-Lube is an outstanding general-purpose grease intended for use with O-ring and other seals in
hydrocarbon service. It can also be used in pneumatic
service. The useful temperature is from -29C to 82C
(-20F to 180F).
Super-O-Lube
Petroleum Grease
Temperature Range
-29C to 82C
(-20F to 180F)
-54C to 204C(2)
(-65F to 400F)
Seal Use
Hydrocarbon fluids
Pneumatic systems under 200 PSI
General Purpose
High pressure pneumatic
Suitable for
Use with Rubber
Compounds:
Fluorocarbon
Fluorosilicone
Neoprene
Nitrile
Polyacrylate
Polyurethane
Fluorocarbon
Fluorosilicone
Neoprene
Nitrile
Polyacrylate
Polyurethane
Butyl
Ethylene Propylene
SBR (GRS)
Silicone(2)
No
Yes
(1)
Seals
O-Ring Applications
5700 Handbook
There are special situations that may exist where one of the
two Parker lubricants would not be the best recommendation. For instance, there may be a need for a special high
vacuum grease, or a lubricant that would be especially
suited to phosphate ester service. For guidance in handling
these unique situations consult a Parker O-Ring Division
Inside Sales Engineer.
3.2 Cleanliness
3.3 Assembly
3-6
Seals
O-Ring Applications
5700 Handbook
Free Diameter
Free O-ring
12
11
10
9
8
Observed
(X Greater Than Y)
Calculated
Free
O-ring
5
4
Chamfer
Angle
10 to 20
3
2
Chamfer to Serve
as Shoe Horn
10 to 20
Cylinder Bore
1
0
4 6 8 10 12 14 16 18 20 22 24 26
Percent of Diametral Stretch on O-ring
Inside Diameter at Time of Assembly
Direction of
Installation
10 to 20
Bore
Piston Rod
Cross Drilled
Port
Pinched O-ring
Chamfer
Hole Junction
or
Undercut Bore
The calculated curve is based on the assumption that the O-ring section
remains round and the volume does not change after stretching.
Formula: Y = 100 1 -
10
100 + X
(Preferred)
View A Enlarged
Seals
O-Ring Applications
5700 Handbook
3.5 Stretch
When an O-ring is stretched, its cross-section is reduced
and flattened. When the centerline diameter is stretched
more than two or three percent, the gland depth must be
reduced to retain the necessary squeeze on the reduced and
flattened cross-section. The observed curve shown in
Figure 3-3 indicates how much the compression diameter is
reduced. The necessary percentage of squeeze should be
applied to this corrected compression diameter, reducing
the gland depth below the recommended dimensions shown
in the standard design charts.
Effects of Cross Section
Larger Section
Smaller Section
Less stable
More friction
Less friction
All Seals
Requires larger supporting
structure
3.6 Squeeze
The tendency of an O-ring to attempt to return to its original
uncompressed shape when the cross-section is deflected is
the basic reason why O-rings make such excellent seals.
Obviously then, squeeze is a major consideration in O-ring
seal design.
In dynamic applications, the maximum recommended
squeeze is approximately 16%, due to friction and wear
considerations, though smaller cross-sections may be
squeezed as much as 25%.
When used as a static seal, the maximum recommended
squeeze for most elastomers is 30%, though this amount
may cause assembly problems in a radial squeeze seal
design. In a face seal situation, however, a 30% squeeze is
often beneficial because recovery is more complete in this
range, and the seal may function at a somewhat lower
temperature. There is a danger in squeezing much more
than 30% since the extra stress induced may contribute to
early seal deterioration. Somewhat higher squeeze may be
used if the seal will not be exposed to high temperatures nor
to fluids that tend to attack the elastomer and cause additional swell.
The minimum squeeze for all seals, regardless of crosssection should be about .2 mm (.007 inches). The reason is
3-8
Seals
O-Ring Applications
5700 Handbook
Recovery
Percent of Original Delection
100
Recovery After
Compression of
70 Hours at
100C (212F)
Recovery is
Essentially
Independent of
Sample Thickness
50
75
0.1
0.005
0.3
0.010
Compression
0.4
0.015
0.5
0.020
Less than
25.4 mm (1")
Over 25.4 mm
(1")
Over nominal
Less than
25.4 mm (1")
Over nominal
Over 25.4 mm
(1")
Seals
Compression
Load
0
mm 0
In. 0
Diameter
O-Ring Applications
5700 Handbook
3.9.2 Engine
See Table 3-4.
General requirements:
Temperature:
Medium:
70
60
Free O-Ring
40
30
20
Linear
Shrinkage 10
Percent
15
10
5
General requirements:
Temperature:
Medium:
Fixed I.D.
10
15
20
25
30
35
40
10
Volume
Shrinkage
Percent
20
Engine Applications
Temperature
Compounds
Range
ASTM
Application Medium
C (F)
D1418
Parker
Motor oil
Oil filter
SAEOils
Wet
cylinders
(Diesel)
Water/
Oil
Airfilter
Air/
Fuel
-35C to 110C
(-31F to 230F)
-30C to 120C
(-22F to 248F)
-25C to 200C
(-13F to 392F)
-25 to 150
(-13F to 392F)
NBR
N0674-70
NBR
N0951-75
FKM
V1164-75
ACM
A1107-70
-30C to 100C
(-22F to 212F)
-25C to 120C
(-13F to 248F)
NBR
N0951-75
FKM
V1164-70
-35C to 90C
(-31F to 194F)
-60 to 210
(140F to 410F)
NBR
N0674-70
VMQ
S1224-70
3-10
Seals
Fixed O.D.
50
O-Ring Applications
5700 Handbook
3.9.6 Transmission
General requirements:
Temperature:
90C (158F)
(short periods up to 150C) (302F)
Medium:
Compound:
Medium:
Medium:
(2)
47-071
N0497-70
(2)
N0674-70
(2)
V0747-75
TR-10 in air
-40F
-23F
-15F
+5F
+5F
+5F
FUEL
Unleaded gasoline
Unleaded +10% ethanol(3)
Unleaded +20% ethanol
Unleaded +10% methanol
Unleaded +20% methanol
12%
26%
24%
35%
32%
14%
24%
24%
33%
30%
36%
53%
56%
66%
67%
1%
5%
4%
14%
26%
1%
2%
4%
6%
15%
1%
2%
5%
16%
36%
Leaded gasoline
Leaded +10% ethanol(3)
Leaded +20% ethanol
Leaded +10% methanol
Leaded +20% methanol
16%
30%
22%
38%
39%
16%
26%
20%
35%
25%
43%
57%
53%
72%
75%
1%
5%
3%
23%
37%
1%
2%
3%
6%
17%
1%
2%
4%
13%
53%
V0494-70 V0834-70
(1)
Volume swell of 2-214 O-ring immersed in the fuel for 70 hours at room temperature.
Stock standard compounds. Generally available off-the-shelf.
(3)
The gasohol mixture most commonly used in the United States consists of unleaded gasoline plus 10%
ethanol (ethyl alcohol.)
(2)
Seals
O-Ring Applications
5700 Handbook
Medium:
refrigerant R134a
refrigerant R12
polyalkylene glycol oil
mineral oil
Medium:
indicated are neither toxic nor carcinogenic (cancer producing). Rubber compounds produced entirely from these
ingredients and which also pass the FDA extraction tests
are said to meet the FDA requirements. (The FDA does
not approve rubber compounds. It is the responsibility of
the manufacturer to compound food grade materials from
the FDA list of ingredients and establish whether they pass
the necessary extraction requirements.)
3-A Sanitary Standards have been formulated by the United
States Public Health Service, the International Association
of Milk Food and Environmental Standards, and the Dairy
and Food Industries Supply Association. A similar document, E-3A Sanitary Standards, was later formulated by
this same group plus the United States Department of
Agriculture and the Institute of American Poultry Industries. The 3-A standards are intended for elastomers to be
used as product contact surfaces in dairy equipment, while
the E-3A standards are intended for elastomers used as
product contact surfaces in egg processing equipment. The
requirements of the two specifications are essentially identical, the intent in each case being to determine whether
rubber materials are capable of being cleaned and receiving
an effective bactericidal treatment while still maintaining
Compound Recommendation for Refrigerants
Fluorinated
Hydrocarbons
Refrigerant (R)
Parker
NBR
CR
FKM
N0674-70
C0873-70
V1164-75
FKM
V1164-75
13
13 B1
14
21
22
CR
CR
CR
CR
CR
C0873-70
C0873-70
C0873-70
C0873-70
C0873-70
CR
C0873-70
CR
CR
FKM
C0873-70
C0873-70
V1164-75
CR
CR
CR
CR
CR
CR
C0873-70
C0873-70
C0873-70
C0873-70
C0873-70
C0873-70
FKM
CR
CR
CR
NBR
CR
CR
V1164-75
C0873-70
C0873-70
C0873-70
N0674-70
C0873-70
C0873-70
11
12
12 and ASTM oil no. 2
(mixed 50:50)
12 and Suniso 4G
(mixed 50:50)
113
114
114 B2
115
502
134a
Fire extinguishers are propelled with Halon R1301 corresponding to Freon 13 B1.
Several of these refrigerants also are used as propellants in
aerosol containers. Further information on compounds can
be found in the Fluid Compatibility Tables in Section VII.
See Table 3-6.
BF (R112)
C318
K-152a
K-142b
MF (R11)
PCA (R113)
TF (R113)
ASTM
D1418
3-12
Seals
O-Ring Applications
5700 Handbook
(Nitrogen Tetroxide/Aerozine 50) Rocket propulsion systems utilizing oxidizer and fuel combinations such as
nitrogen tetroxide (N2O4) and Aerozine 50 (50/50 mixture
of UDMH and hydrazine) prompted development of an
elastomeric compound to seal against these fluids. The fuel
system (i.e. Aerozine 50) does not pose as difficult a sealing
problem as does the oxidizer. Most currently available
elastomeric compounds are degraded by the extremely
vigorous N2O4 oxidizer. However, Parker Seal Company
developed a number of compounds which demonstrate
markedly improved resistance to N2O4 in both liquid and
vapor phases.
NSF 61
Certified Materials
N1219-60
N1220-70
E0883-70
V0680-70
E3609-70
N0757-70
E3609-70
E1244-70
E1242-65
E1240-90
E1257-70
E1571-70
E1570-70
Polymer
Ethylene
Propylene
Fluorocarbon
Nitrile
Silicone
(1)
(2)
3A and
E3A
Classes
E0798-70
E1028-70
V0680-70
N1069-70
N1219-60
N1220-70
N0508-75
S0802-40
S0317-60
NT (1)
NT (1)
1,2,3,4
NT (1)
NT (1)
NT (1)
1,2,3,4
2,3,4
1,2,3,4
S1138-70
S0355-75
NT (1)
1,2,3,4
Color/
Other Features
Black
Black
Red/USDA
Black
Black
Black
Black, USDA (2)
White
Rust/ZZ-R-765,
Classes 1A, 1B,
2A, 2B/USDA
Rust
Rust/USDA (2)
NT = Not tested
USDA = Declared chemically acceptable by United States
Department of Agriculture, Animal and Plant Health Inspection
Service, Meat and Poultry Inspection Program. They may be
used in processing or storage areas for contact with meat or
poultry food product prepared under Federal inspection...
3-13
Seals
FDA
Compound
Number
O-Ring Applications
5700 Handbook
180C (350F)
107 rad
3.9.14 Radiation
One of the most important properties if an elastomer used
as an O-ring seal is its resistance to compression set. On
exposure to gamma radiation, it is compression set that is
most severely affected. After experiencing 1 x 108 rads, all
elastomers tested had taken over 85% set, enough loss of
memory that leakage would be expected. At 1 x107 rads,
there were big differences between compounds, while at
1 x 106 rads, the effects on all compounds were minor. It is
therefore in the range of 1 x 107, that an O-ring compound
must be selected with care, while at higher levels they
should not be considered, and at lower levels factors other
than radiation will be more significant.
Compound
S0604-70
N0674-70
N0741-75
E0740-75
S0455-70
E0515-80
P0642-70
A0607-70
V0747-75
L0677-70
Polymer
Silicone
Nitrile
Nitrile
Ethylene Propylene
Silicone (Hi Temp)
Ethylene Propylene
Polyurethane
Polyacrylate
Fluorocarbon
Fluorosilicone
Comp.
Set at
107 Rads (1)
20.0%
24.3%
24.3%
28.6%
31.4%
46.6%
55.2%
61.5%
66.7%
67.6%
Max.
Temp. (2)
204C (400F)
149C (300F)
149C (300F)
177C (350F)
177C (350F)
149C (300F)
82C (180F)
149C (300F)
204C (400F)
204C (400F)
Steam &
Water
Resistance
Silicone
Fluid
Resistance
Poor
OK to 49C (120F)
OK to 49C (120F)
Good
Poor
Good
Poor
Poor
Poor
Poor
Poor
Good
Good
Good
Poor
Good
Good
Good
Good
Good
(1)
Compression set after exposure to 107 rads of gamma radiation at room temperature. The lower values are
preferred. If over 40%, use only at lower dosage level.
(2)
Temperature at which .139 cross section ring takes a 90% compression set after 1000 hours when not exposed
to radiation or fluids.
Note: Some of these compounds may no longer be available.
Seals
O-Ring Applications
5700 Handbook
Temp. Range
Contact our Inside Sales Engineering Department regarding the above and more difficult conditions.
Phosphate Esters
Aircraft types (alkyl phosphate esters)
-54C to 149C
E1235-80, ethylene propylene
(-65F to 300F)
(NAS1613)
E0692-75, ethylene propylene
Industrial types (aryl phosphate esters)
-34C to 93C
E1253-80, ethylene propylene
(-30F to 200F)
V1164-75, fluorocarbon
V1226-75, fluorocarbon
With the possible exceptions of natural rubber and polyurethane, the base polymers for elastomers are normally nonnutrient to fungi. Nevertheless, there are compounds that
will support fungus growth because they contain nutrient
type ingredients. The plasticizer used is of particular importance in this respect. By studying all the ingredients of a
particular compound, a chemist can predict quite accurately
whether it will support fungus growth, without conducting
a test. Therefore, if it is desirable to use some compound not
listed below in an application that requires a non-nutrient
material, contact Parkers Inside Sales Engineering Department to determine whether the compound is a good candidate for the application.
Butyl
B0612-70
Neoprene
C0365-45
C0873-70
C1124-70
Ethylene
Propylene
E0692-75
E0740-75
E0515-80
E0540-80
Nitrile
N0545-40
N0299-80
N0406-60
N0525-60
N0506-65
47-071
N0103-70
N0497-70
N0602-70
N0674-70
N0818-70
N0304-75
N0951-75
N0507-90
N0552-90
Silicone
S0595-80
S0317-60
S0613-60
S0455-70
S0604-70
S0355-75
S0614-80
Fluorocarbon
V0680-70
V0747-75
V1164-75
V0709-90
Non-Nutrient
to Fungus Growth
O-Ring Compounds
Supports
Fungus Growth
Polyacrylate
A1107-70
Water-Glycol
-18C to 60C
(0F to 140F)
(But wider range
as a coolant)
Neoprene
C0267-50
Ethylene
Propylene
E0603-70
E0652-90
Nitrile
N1069-70
N0756-75
Buna S
G0244-70
Fluorosilicone
L1120-70
Polyurethane
P0642-70
P0648-90
3-15
Seals
O-Ring Applications
5700 Handbook
Content
Application
Oil in water
emulsion
Water in oil
emulsion
Water polymer
solutions
Waterless
synthetic fluid
3.9.17.3 Micro-Emulsions
Recently, new synthetic concentrates, which are similar to
oils, have been developed which form micro-emulsions
when mixed by 5% with water. This is neither a true
solution nor an emulsion, but can be better described as a
highly stable colloidal suspension of high viscosity oil
drops in water.
The concentrate contains both water and oil soluble, wear
resistant additives which form a high-pressure resistant
film with good lubricating properties. They are not prone to
the micro-biological attack, and have a useful life of more
than one year.
Concentrates currently available at this time are limited to
100 Bar (1450 PSI) working pressure and are mostly used
in automated production lines, industrial robots, etc.
3-16
Seals
O-Ring Applications
5700 Handbook
HFA/HFB
2
1)
Reference
HFC
HFD
0.3 to 2
20 to 70
12 to 50
viscosity/temperature relationship
good
very good
bad
ca. 0.99
1.04 to 1.09
1.15 to 1.45
temperature range
3C to 55C
(37F to 131F)
-25C to 60C
(-13F to 140F)
-20C to 150C
(-4F to 302F)
80 to 98
35 to 55
none
stability
emulsion poor
solution very good
very good
very good
life of bearings
5 to 10%
6 to 15%
50 to 100%
heat transfer
excellent
good
poor
lubrication
acceptable
good
excellent
corrosion resistance
poor to acceptable
good
excellent
combustion temperature
not possible
after vaporizing
of water under 1000C (1832F)
ca. 600C
(1112F)
environmental risk
special waste
special waste
regular inspection
pH-level
concentration
water hardness
micro-organisms
viscosity
water content
pH-level
viscosity
neutral pH
spec. gravity
seal material
NBR, FKM, AU
NBR
FKM, EPDM1)
Seals
O-Ring Applications
5700 Handbook
90
Conventional Nitrile Compound
80
% of Original Deflection
70
60
50
40
20
10
0
100C
(212F)
125C
(257F)
150C
(302F)
3-18
Seals
Compound N0951-75
30
O-Ring Applications
5700 Handbook
Air
110C (230F)
70C (158F)
90C (194F)
High
temperature
NBR
120C (248F)
100C (212F)
100C (212F)
FKM
200C (392F)1)
EPDM
not compatible
VMQ
150C (302F)1)
100C (212F)
210C (410F)
FMQ
1)
100C (212F)
175C (347F)
1)
NBR
175C (347F)
3)
ACM
150C (302F)
CR
100C (212F)
80C (176F)4)
150C (302F)
90C (194F)
3-19
Seals
O-Ring Applications
5700 Handbook
Polymer
B0612-70
C0873-70
E0515-80
E0529-60
E0692-75
L0449-65
L0677-70
N0406-60
N0674-70
P0648-90
S0455-70
S0604-70
V0747-75
V0884-75
V0894-90
Butyl
Neoprene
Ethylene Propylene
Ethylene Propylene
Ethylene Propylene
Fluorosilicone
Fluorosilicone
Nitrile
Nitrile
Polyurethane
Silicone
Silicone
Fluorocarbon
Fluorocarbon
Fluorocarbon
Compound
Number
10
Percent
Weight Loss
.18
.13
.39
.92
.76
.28
.25
3.45
1.06
1.29
.03
.31
.09
.07
.07
Dry
8
7
6
5
4
3
Lubricated With Dow
Corning DC11 Vacuum Grease
2
1
0
15
30
Seals
50
Squeeze Percent
O-Ring Applications
5700 Handbook
B Gland Flanks
Ra
Rmax
Vacuum
0.8
3.2
1.6
6.3
to 10-8 Torr
0.4
1.6
1.6
6.3
0.10
0.40
1.6
6.3
to 10
-11
Torr
3.12 Gases-Permeability
All elastomers are permeable to some extent, allowing air,
other gases under pressure or volatile liquids to penetrate
into the seal material and gradually escape on the low
pressure side.
The permeability rate of various gases through different
rubber materials varies in an unpredictable way. In fact, the
permeability of a given base polymer will vary according to
the proportions of the copolymer, among other things.
Figure 3-10 shows this very clearly for one class of butadiene-acrylonitrile copolymers.
The permeability also varies with temperature, and though
the rate increases with increasing temperature, there is no
easily defined relationship between these two variables.
Table 3-19 (found at the end of this section) lists some
permeability rates at various temperatures that may be
helpful in approximating leak rates through O-ring seals.
Temperature compatibility
Low weight loss in vacuum
Atmosphere
A
B
10-7
O2
10
-8
N2
10
20
Acrylonitrile Content (%)
30
40
Vacuum
Seals
H2
He
10- 9
CO 2
O-Ring Applications
5700 Handbook
soak period, gas trapped inside the seal expands and may
escape harmlessly into the atmosphere, or it may form
blisters on the surface. Some of these may rupture, leaving
cracks or pits. This phenomenon is called explosive decompression.
The severity of the damage varies with pressure, the gas, the
rubber compound, the size of the cross section, and other
factors, such as pressure drop rate.
Dry Ring
Factor Q
1.4
1.0
.8
Lubricated Ring
Dow Corning DC11
Vacuum Grease
.4
0
20
30
Percent Squeeze
3.14 Acids
Resistance of elastomeric compounds to acids often changes
dramatically with temperature and with concentration.
In strong solutions, the acid resistant fluorocarbon compound, V0834-70, often maintains its properties rather
well, particularly at room temperature. In the Fluid Compatibility Table in Section VII, it is shown as the only
compound that is likely to withstand the effects of concentrated nitric and hydrochloric acids at room temperature. At
higher temperatures in these acids, no readily available
elastomer can be expected to maintain a seal except on a
short term basis.
.2
10
1.2
.6
Where problems due to explosive decompression are anticipated, it may help to use a small cross section O-ring, as
smaller cross sections are less subject to explosive decompression problems than are large ones.
40
50
For helium leak rate, a variation of 50% from the predicted value
should be anticipated to allow for limitations in the accuracy of test
equipment and available standards, and for variations between
samples.
3-22
Seals
O-Ring Applications
5700 Handbook
Fluorocarbon
V0680-70
V0747-75
V0709-90 (marginal)
Neoprene
C0267-50
C0557-70
Polyurethane
P0642-70
P0648-90
Silicone
S0317-60
S0469-40
S0604-70
3.15 Semiconductor
The semiconductor industry is utilizing increased levels of
toxic fluids and gases, which place extreme demands upon
seal design and materials. Not only to prevent system
contamination from the external environment, but they
must not contribute any contaminates to the system in their
own right. Specific needs are required by each of the four
3-23
Seals
O-Ring Applications
5700 Handbook
Anhydrous Ammonia
V1264-90
V1263-75
V1262-65
Naptha or Kerosene
V1237-65
V1226-75
V1163-75
V0884-75
Gasoline/Alcohol Blends*
V0747-75
N1500-75
X
N1499-70
N0757-70
N0674-70
N0497-70
Compound
L1120-70
Gasoline
Service
N0299-50
Underwriters Laboratories
X
X
X
X
LP-Gas
*Contact factory for specific ratios of alcohol (methyl and/or ethyl) and gasoline
30
300
N0406-60
250
20
Percent Swell
Percent Swell
25
C0557-70
15
N0219-70
10
N0103-70
N0398-70
N0406-60
N0398-70
200
150
N0103-70
100
50 C0557-70
E0540-80
E0540-80
Time Years
Time Years
3-24
Seals
O-Ring Applications
5700 Handbook
3.17.1 Introduction
O-rings and lathe-cut rings are being used extensively as
low power drive belts because they are inexpensive and
simple to install. Due to their resilient nature, they do not
require the use of belt tensioning devices, and pulley
locations do not need to be extremely accurate.
For most elastic drive belt applications, O-rings are preferred over lathe-cut rings for a number of reasons:
(a) Ease of installation
(b) Uniform stress distribution
(c) Ready availability of many standard sizes
(d) Flexibility of usage.
Lathe-cuts are often completely adequate for the task, but
they are more likely to require special tooling, making the
cost prohibitive when only a small quantity is needed. For
large quantities, the tooling cost becomes insignificant, and
overall cost savings are generally realized in using lathe-cut
rings. Due to the special manufacturing techniques employed, all lathe-cut applications are reviewed by the O-Ring
Divisions Inside Sales Engineering Department.
Parker Seal is conducting a continuing program of testing
compounds for drive belt service, and developing new
drive belt compounds to optimize the properties that are
most needed in a drive belt. Minimum stress relaxation and
maximum flex life are especially important in a drive belt,
but several compounds must be available to provide resistance to the various fluids and temperature ranges that may
be encountered.
PSI Bar
34.5 500
27.6 400
0
4-7
60
S0
70
42P06 7-70
5
C05
1-65
7
0
E 5
20.7 300
13.8 200
10.4 150
8.3 120
6.9 100
6.2 90
10
20
30
Percent Stretch
40
50
Seals
O-Ring Applications
5700 Handbook
Temp C (F)
24 (75)
66 (150)
82 (180)
DBA(5) E0751-65
1.13
DBA(5) P0642-70
1.29
DBA(5) C0557-70
1.47
DBA(5) S0604-70
1.43
13%
19%
14%
21%
14%
18%
20%
21%
29%
36%
14%
19%
22%
2%
5%
2%
Good
Excellent
Acceptable
Excellent
82 (180)
54 (130)
82 (180)
149 (300)
655
135.9 (1970)
385
30.4 (440)
705
302.2 (4380)
535
29 (420)
705
138.0 (2000)
250
38.0 (550)
705
62.1 (900)
160
41.1 (600)
Poor
Excellent
Excellent
Excellent
Good
Excellent
Excellent
Fair
Excellent
Excellent
Good
Excellent
Good
Good
Good
Poor
Poor
Good
Excellent
Poor
(1)All values shown are typical. Do not use for specification limits. Specimens: 2-153 O-rings.
(2)After three days dynamic testing at room temperature Motor pulley pitch diameter: .611", speed: 1740 rpm. Cast iron driven pulley
pitch diameter: 2.623". Duty cycle 3 minutes on, 15 seconds off. Load: inertia of cast iron pulley.
(3)After 48 hours static testing at temperature indicated. Two " diameter pulleys.
(4)For information on resistance of these materials to other fluids, see Fluid Compatibility Table in Section VII.
(5)When ordering parts for drive belt applications, the letters DBA precede the part number. Example: DBAS0604-70 2-250.
Seals
O-Ring Applications
5700 Handbook
Elastomer
Temperature
F
Permeability (1)
x 10-8
Source (2)
Acetone
Silicone
25
77
14,850
Acetylene
Acetylene
Acetylene
Acetylene
Acetylene
Acetylene
Butyl
Butyl
Natural
Natural
Nitrile
Nitrile
25
50
25
50
25
50
77
122
77
122
77
122
1.26
5.74
74.5
192
18.7
67.4
I
I
I
I
I
I
Air
Air
Air
Air
Air
Air
Air
Air
Butyl
Butyl
Fluorosilicone
Natural
Natural
Silicone
Silicone
Polyurethane
0.2
100
48.4
6.7
262
18.0 to 25.6
74
0.5
DC
DC
DC
DC
DC
DC
DC
DC
Ammonia
Silicone
25
77
4396
Argon
Argon
Argon
Argon
Argon
Argon
Argon
Argon
Argon
Argon
Argon
Argon
Argon
Argon
Argon
Argon
Argon
Argon
Argon
Argon
Argon
Argon
Argon
Argon
Argon
Argon
Argon
Argon
Argon
Argon
Argon
Argon
Argon
Butyl (B0318-70)
Butyl (B0318-70)
Butyl (B0318-70)
Ethylene Propylene
Ethylene Propylene (E0529-65)
Ethylene Propylene (E0692-75)
Ethylene Propylene
Ethylene Propylene (E0529-65)
Ethylene Propylene (E0692-75)
Ethylene Propylene
Ethylene Propylene (E0529-65)
Ethylene Propylene (E0692-75)
Fluorocarbon-Viton4
Natural
Neoprene
Neoprene
Neoprene
Neoprene
Nitrile
Nitrile (N0741-75)
Nitrile
Nitrile (N0741-75)
Nitrile
Nitrile (N0741-75)
Polyacrylate (A0607-70)
Polyacrylate (A0607-70)
Polyacrylate (A0607-70)
Polyurethane (P0642-70)
Polyurethane (P0648-90)
Polyurethane (P0642-70)
Polyurethane (P0648-90)
Polyurethane (P0642-70)
Polyurethane (P0648-90)
35
82
124
38
40
38
93
94
93
149
155
149
93
25
36
38
52
86
38
39
79
80
121
118
38
91
153
39
39
66
67
94
94
95
180
255
100
104
100
200
202
199
300
311
300
200
77
97
100
126
187
100
103
175
176
250
245
100
195
307
103
102
151
152
202
201
1.19
9.04
36.1
11.3 to 22.9
22.9
15.58
57.0 to 108.7
105
77
170 to 375
375
280
31
17.2
0.67
18
1.42
6.46
1.60 to 3.88
2.06
6.39 to 16.7
7.36
13.7 to 62.3
34
8.28
40.66
327
1.5
0.99
5.45
4.07
20.8
7.3
A
A
A
A
A
A
A
A
A
A
A
A
A
I
I
A
I
I
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
Room
200
Room
Room
200
Room
200
Room
392
392
392
Seals
O-Ring Applications
5700 Handbook
Elastomer
Argon
Argon
Argon
Argon
Argon
Argon
Argon
Argon
Argon
Argon
Argon
Argon
SBR
SBR (G0244-70)
SBR (G0244-70)
SBR (G0244-70)
Silicone
Silicone (S0684-70)
Silicone
Silicone (S0684-70)
Silicone
Silicone (S0684-70)
Silicone
PTFE
Benzene
Temperature
F
Permeability (1)
x 10-8
Source (2)
A
A
A
A
A
A
A
A
A
A
I
A
38
38
84
122
38
38
93
91
149
156
Room
149
100
101
183
251
100
101
200
195
300
313
300
1.09 to 5.24
5.24
25.5
138
230 to 487
347
454 to 1500
454
566 to 2840
1020
450
12
Silicone
25
77
14300
Butane
Butane
Butane
Butane
Butane
Butane
Silicone
Silicone
Silicone
Silicone
Silicone
Silicone
25
30
40
50
60
70
77
86
104
122
140
158
6750
12980
12380
11630
11030
11330
I
I
I
I
I
I
iso-Butane
iso-Butane
iso-Butane
iso-Butane
iso-Butane
Silicone
Silicone
Silicone
Silicone
Silicone
30
40
50
60
70
86
104
122
140
158
7250 to 12980
7058 to 12380
6861 to 11630
6691 to 11030
6541 to 11330
I
I
I
I
I
Carbon Dioxide
Carbon Dioxide
Carbon Dioxide
Carbon Dioxide
Carbon Dioxide
Carbon Dioxide
Carbon Dioxide
Carbon Dioxide
Carbon Dioxide
Carbon Dioxide
Carbon Dioxide
Carbon Dioxide
Carbon Dioxide
Carbon Dioxide
Carbon Dioxide
Carbon Dioxide
Carbon Dioxide
Carbon Dioxide
Carbon Dioxide
Carbon Dioxide
Carbon Dioxide
Carbon Dioxide
Carbon Dioxide
Carbon Dioxide
Carbon Dioxide
Butadiene
Butadiene
Butadiene
Fluorosilicone
Fluorosilicone
Natural
Natural
Natural
Neoprene
Neoprene
Neoprene
Neoprene
Nitrile
Nitrile
Polysulfide
Polysulfide
Polyurethane
Polyurethane
Silicone
Silicone
Silicone
Silicone
SBR
SBR
FEP PTFE
25
30
50
Room
26
25
30
50
22.3
25
30
50
20
30
23
25
20
30
20.5
25
32
43.5
25
30
25
77
86
122
36.3 to 103.6
103.5
197.4
514
444
98.3 to 116
98.3
218
9.98
13.9 to 19.2
14.0 to 18.8
47.6
5.63
47.7
7.95
2.37
10.5
5.4 to 30.0
1028 to 1530
2280
1025 to 1545
1043 to 1538
92.8
93.0
7.51
I
I
I
DC
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
79
77
86
122
72
77
86
122
68
86
73
77
68
86
69
77
90
110
77
86
77
Seals
O-Ring Applications
5700 Handbook
Elastomer
Temperature
F
77
77
Permeability (1)
x 10-8
Source (2)
4.64
11.8
255
I
I
I
I
Carbon Monoxide
Carbon Monoxide
Carbon Monoxide
Butadiene
Natural
Silicone
25
25
Room
Carbon Tetrachloride
Silicone
Room
52500
Carbonyl Chloride
Silicone
Room
11250
Ethane
Ethane
Ethylene
Butadiene
Silicone
Silicone
25
25
Room
77
77
24.97
1875
1013
I
I
I
Formaldehyde
Silicone
Room
8830
Freon 11
Silicone
25
77
11250
Freon 12
Freon 12
Freon 12
Freon 12
Freon 12
Freon 12
Butyl
Fluorocarbon
Neoprene
Nitrile
Polyurethane
Silicone
25
25
25
25
25
25
77
77
77
77
77
77
1.05 to 55.5
2.4 to 63
8.78
.3 to 5.5
14.55
1035
I
I
I
I
I
I
Freon 22
Freon 22
Freon 22
Freon 22
Freon 22
Butyl
Fluorocarbon
Neoprene
Nitrile
Polyurethane
25
25
25
25
25
77
77
77
77
77
3.0
57
19.5
353
225
I
I
I
I
I
Helium
Helium
Helium
Helium
Helium
Helium
Helium
Helium
Helium
Helium
Helium
Helium
Helium
Helium
Helium
Helium
Helium
Helium
Helium
Helium
Helium
Helium
Helium
Helium
Helium
Helium
Helium
Butadiene
Butyl (B0612-70)
Butyl (B0612-70)
Butyl (B0612-70)
EP (E0515-80)
EP (E0515-80)
EP (E0515-80)
Fluorocarbon
Fluorocarbon (V0747-75)
Fluorocarbon (V0747-75)
Fluorocarbon (V0747-75)
Fluorosilicone (L0449-65)
Fluorosilicone (L0449-65)
Fluorosilicone (L0449-65)
Natural
Natural
Natural
Natural
Neoprene
Neoprene
Neoprene (C0557-70)
Neoprene
Neoprene
Neoprene
Neoprene
Neoprene (C0557-70)
Neoprene
25
25
80
150
25
80
150
30
25
80
150
25
80
150
25
30
34
50
0
25
25
30.4
41.5
57
73
80
101.3
77
77
176
302
77
176
302
86
77
176
302
77
176
302
77
86
93
122
32
77
77
87
107
135
163
176
214
11.8
6.5
52.0
240
19.7
61.0
320
12.8
12.7
131
490
143
461
973
17.25 to 32.3
27.0
43.0
51.6
1.7
.6 to 7.5
6.5
5.9
11.8
26.3
36.0
59.6
70.5
I
P
P
P
P
P
P
I
P
P
P
P
P
P
I
I
I
I
I
I
P
I
I
I
I
P
I
Seals
O-Ring Applications
5700 Handbook
Elastomer
Helium
Helium
Helium
Helium
Helium
Helium
Helium
Helium
Helium
Helium
Helium
Helium
Helium
Helium
Helium
Helium
Helium
Helium
Helium
Helium
Helium
Helium
Helium
Helium
Helium
Helium
Neoprene (C0557-70)
Nitrile
Nitrile (N0674-70)
Nitrile
Nitrile (N0674-70)
Nitrile (N0674-70)
Nitroso
Polyacrylate (A0607-70)
Polyacrylate (A0607-70)
Polyacrylate (A0607-70)
Polyurethane (P0642-70)
Polyurethane (P0642-70)
SBR
Silicone
Silicone (S0604-70)
Silicone
Silicone (S0604-70)
Silicone (S0604-70)
TFE PTFE
TFE PTFE
TFE PTFE
FEP PTFE
FEP PTFE
FEP PTFE
FEP PTFE
FEP PTFE
Permeability (1)
x 10-8
Source (2)
77
176
302
77
176
77
77
77
86
176
302
77
86
122
77
86
122
167
212
187
7.40
8.0
19.3
65.9
252
1050
16.3
110
310
3.6
33.5
17.3
263
238
173
560
1250
523 (sic)
90.0
128
30.1
46.5
58.5
94.4
157
P
I
P
I
P
P
I
P
P
P
P
P
I
I
P
I
P
P
I
I
I
I
I
I
I
I
Temperature
F
150
25
25
50
80
150
NR3
25
80
150
25
80
25
25
25
30
80
150
25
30
50
25
30
50
75
100
302
77
77
122
176
302
Hexane
Silicone
25
77
7050
Hydrogen
Hydrogen
Hydrogen
Hydrogen
Hydrogen
Hydrogen
Hydrogen
Hydrogen
Hydrogen
Hydrogen
Hydrogen
Hydrogen
Hydrogen
Hydrogen
Hydrogen
Hydrogen
Hydrogen
Hydrogen
Hydrogen
Hydrogen
Hydrogen
Hydrogen
Butadiene
Butadiene
Butyl (B0318-70)
Butyl (B0318-70)
Butyl (B0318-70)
Ethylene Propylene
Ethylene Propylene (E0529-65)
Ethylene Propylene (E0692-75)
Ethylene Propylene
Ethylene Propylene (E0529-65)
Ethylene Propylene (E0692-75)
Ethylene Propylene
Ethylene Propylene (E0529-65)
Ethylene Propylene (E0692-75)
Fluorocarbon-Viton4
Neoprene
Nitrile
Nitrile (N0741-75)
Nitrile
Nitrile (N0741-75)
Nitrile
Polyacrylate (A0607-70)
25
50
35
82
124
38
40
38
93
94
94
152
155
151
93
38
38
39
79
80
121
38
77
122
95
180
255
100
104
100
200
202
201
306
311
304
200
100
100
103
175
176
250
100
31.6
76.0
16.1
68.2
273
28.9 to 111
111
45.3
187 to 544
544
252
599 to 1730
1730
591
160
180
10.3 to 32.1
11.9
47.0 to 125
88.2
98.8 to 330
49.6
I
I
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
Seals
O-Ring Applications
5700 Handbook
Elastomer
Hydrogen
Hydrogen
Hydrogen
Hydrogen
Hydrogen
Hydrogen
Hydrogen
Hydrogen
Hydrogen
Hydrogen
Hydrogen
Hydrogen
Hydrogen
Hydrogen
Hydrogen
Hydrogen
Hydrogen
Hydrogen
Hydrogen
Hydrogen
Hydrogen
Hydrogen
Hydrogen
Hydrogen
Hydrogen
Hydrogen
Hydrogen
Hydrogen
Hydrogen
Hydrogen
Hydrogen
Hydrogen
Polyacrylate (A0607-70)
Polyacrylate (A0607-70)
Polysulfide
Polyurethane (P0642-70)
Polyurethane (P0648-90)
Polyurethane (P0642-70)
Polyurethane (P0648-90)
Polyurethane (P0642-70)
SBR
SBR (G0244-70)
SBR (G0244-70)
SBR (G0244-70)
Silicone
Silicone
Silicone (S0684-70)
Silicone
Silicone (S0684-70)
Silicone
Silicone (S0684-70)
FEP PTFE
FEP PTFE
FEP PTFE
FEP PTFE
FEP PTFE
FEP PTFE
FEP PTFE
FEP PTFE
FEP PTFE
FEP PTFE
TFE PTFE
TFE PTFE
TFE PTFE
Hydrogen Sulfide
Temperature
F
Source (2)
A
A
I
A
A
A
A
A
I
A
A
A
I
I
A
A
A
A
A
I
I
I
I
I
I
I
I
I
I
I
I
I
I
91
153
25
39
39
66
67
94
25
38
84
122
Room
25
39
93
91
149
156
-74
-46
-18
10
25
38
50
66
75
100
25
30
50
77
103
200
195
300
313
-101
-51
0
50
77
100
122
151
167
212
77
86
122
174
927
1.2
19.3
4.89
70.4
21.3
155
30.1
46.2
245
539
188 to 488
495
1010
1570 to 2070
2070
3300 to 8760
4300
.0113
.180
1.05
3.90
9.89
10.1
24.7
22.5
49.5
89.9
17.8
42.0
63.8
Silicone
25
77
4870
Iodine
Silicone
Room
Krypton
Krypton
Krypton
Krypton
Krypton
Krypton
Krypton
Krypton
Krypton
Krypton
Krypton
Krypton
Krypton
Krypton
Krypton
Butyl (B0318-70)
Butyl (B0318-70)
Butyl (B0318-70)
Ethylene Propylene (E0529-65)
Ethylene Propylene (E0692-75)
Ethylene Propylene (E0529-65)
Ethylene Propylene (E0692-75)
Ethylene Propylene (E0529-65)
Ethylene Propylene (E0692-75)
Fluorocarbon-Viton4
Natural
Neoprene
Nitrile
Nitrile (N0741-75)
Nitrile
35
82
124
40
38
94
94
155
151
93
35
38
38
39
79
195
307
77
103
102
151
152
202
77
101
183
251
Permeability (1)
x 10-8
95
180
255
104
101
202
201
311
304
200
95
100
100
103
175
75000
1.39
10.3
54.7
38.6
16.6
184
91.2
324
289
25
47.8
32
.935 to 4.40
1.82
10.7 to 30.1
A
A
A
A
A
A
A
A
A
A
I
A
A
A
A
Seals
O-Ring Applications
5700 Handbook
Elastomer
Krypton
Krypton
Krypton
Krypton
Krypton
Krypton
Krypton
Krypton
Krypton
Krypton
Krypton
Krypton
Krypton
Krypton
Krypton
Krypton
Krypton
Krypton
Krypton
Krypton
Krypton
Krypton
Krypton
Krypton
Krypton
Krypton
Nitrile (N0741-75)
Nitrile
Nitrile (N0741-75)
Polyacrylate (A0607-70)
Polyacrylate (A0607-70)
Polyacrylate (A0607-70)
Polyurethane (P0642-70)
Polyurethane (P0648-90)
Polyurethane (P0642-70)
Polyurethane (P0648-90)
Polyurethane (P0642-70)
Polyurethane (P0648-90)
SBR
SBR (G0244-70)
SBR
SBR (G0244-70)
SBR
SBR (G0244-70)
Silicone
Silicone
Silicone (S0684-70)
Silicone
Silicone (S0684-70)
Silicone
Silicone (S0684-70)
PTFE
Methane
Methane
Methane
Methane
Methane
Methane
Methane
Methane
Methane
Methane
Methane
Methane
Methane
Methane
Methane
Butadiene
Butyl
Fluorocarbon
Natural
Neoprene
Nitrile
Silicone
Silicone
FEP PTFE
FEP PTFE
FEP PTFE
FEP PTFE
FEP PTFE
TFE PTFE
TFE PTFE
Temperature
F
Permeability (1)
x 10-8
Source (2)
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
I
A
A
A
A
A
A
A
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
80
121
118
38
91
153
39
39
66
67
94
94
38
38
82
84
121
122
Room
38
38
93
91
149
156
149
176
250
245
100
195
307
103
102
151
152
202
201
100
101
180
183
250
251
100
101
200
195
300
313
300
11.6
27.8 to 86.6
48.9
14.8
90.4
464
2.06
.783
6.53
4.35
31.9
36.8
7.35 to 30.8
7.35
43.0 to 82.1
43.0
144 to 276
144
735
521 to 708
708
749
1440
1030 to 3190
2320
24
25
25
30
25
25
25
25
30
25
30
50
75
100
30
50
77
77
86
77
77
77
77
86
77
86
122
167
212
86
122
9.77
.56
.12
22.7
2.6
2.4
705
443
.702 to .83
1.05
2.02
4.50
8.99
1.13
3.0
Methanol
Silicone
Room
10430
Neon
Nitric Oxide
Natural
Silicone
35
Room
95
8.5
450
I
I
Nitrogen
Nitrogen
Nitrogen
Nitrogen
Nitrogen
Butadiene
Butadiene
Butadiene
Butyl
Butyl
25
25
50
25
30
77
77
122
77
86
3.0
4.85
14.3
.244
.234
I
I
I
I
I
Seals
O-Ring Applications
5700 Handbook
Elastomer
Nitrogen
Nitrogen
Nitrogen
Nitrogen
Nitrogen
Nitrogen
Nitrogen
Nitrogen
Nitrogen
Nitrogen
Nitrogen
Nitrogen
Nitrogen
Nitrogen
Nitrogen
Nitrogen
Nitrogen
Nitrogen
Nitrogen
Nitrogen
Nitrogen
Nitrogen
Nitrogen
Nitrogen
Nitrogen
Nitrogen
Nitrogen
Nitrogen
Nitrogen
Nitrogen
Nitrogen
Nitrogen
Nitrogen
Nitrogen
Temperature
F
122
86
122
Permeability (1)
x 10-8
Source (2)
1.25
.233
.975
40
5.3
16.8
4.8
6.04 to 9.9
6.06 to 7.9
19.1
.01 to 2
.885
4.35
16.7
.46
.177 to 1.89
.176 to .795
1.07 to 6.9
13.4
108
4.7
4.76
75 to 120
210
113 to 188
240
2.4
3.9
7.5
1.44
1.9
4.4
9.2
18.5
I
I
I
DC
I
I
DC
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
Butyl
Fluorocarbon
Fluorocarbon
Fluorosilicone
Isoprene
Isoprene
Natural
Natural
Natural
Natural
Neoprene
Neoprene
Neoprene
Neoprene
Nitrile
Nitrile
Nitrile
Nitrile
Nitrile
Nitroso
SBR
SBR
Silicone
Silicone
Silicone
Silicone
TFE PTFE
TFE PTFE
TFE PTFE
FEP PTFE
FEP PTFE
FEP PTFE
FEP PTFE
FEP PTFE
50
30
50
Room
25
50
Room
25
30
50
25
30
54
85
20
25
30
50
79
NR3
25
30
Room
Room
30
50
25
30
50
25
30
50
75
100
Nitrogen Dioxide
Silicone
Room
5701
Nitrogen Oxides
Nitrogen Oxides
TFE PTFE
FEP PTFE
NR3
NR3
3475
485
I
I
Nitrogen Tetroxide
Nitrogen Tetroxide
Nitrogen Tetroxide
TFE PTFE
TFE PTFE
TFE PTFE
25
28
28
0.050 to 1.00
12.4
3.9
I
I
I
3263
77
122
77
86
122
77
86
129
185
68
77
86
122
174
77
86
86
122
77
86
122
77
86
122
167
212
77
82
82
Nitrous Oxide
Silicone
Room
Octane
Silicone
25
77
6450
Oxygen
Oxygen
Oxygen
Oxygen
Oxygen
Oxygen
Butadiene
Butadiene
Butadiene
Butadiene
Butyl
Butyl
25
25
30
50
Room
25
77
77
86
122
8.5
14.3
14.3
35.5
.98 to 1.05
.89 to 4.2
I
I
I
I
I
I
77
Seals
O-Ring Applications
5700 Handbook
Elastomer
Permeability (1)
x 10-8
Source (2)
70
90
93
111
77
77
122
167
212
.98
3.98
1.7
81.3
82.5
78
13.0
17.5
17.48
46.4
3.1
3.0
1.13
13
4.73
.72 to 6.15
.72
3.45 to 18.9
.72 to 6.2
5.78
.22
1.3 to 4.0
.80
12.8
330 to 450
195 to 443
234
346
257 to 384
7.5
3.37
9.22
17.99
31.48
I
I
I
DC
I
I
DC
I
I
I
I
I
I
A
I
I
I
I
I
I
I
I
DC
I
I
I
I
I
I
I
I
I
I
I
15000
32600
28900
25700
22900
20700
I
I
I
I
I
I
Temperature
F
Oxygen
Oxygen
Oxygen
Oxygen
Oxygen
Oxygen
Oxygen
Oxygen
Oxygen
Oxygen
Oxygen
Oxygen
Oxygen
Oxygen
Oxygen
Oxygen
Oxygen
Oxygen
Oxygen
Oxygen
Oxygen
Oxygen
Oxygen
Oxygen
Oxygen
Oxygen
Oxygen
Oxygen
Oxygen
Oxygen
Oxygen
Oxygen
Oxygen
Oxygen
Butyl
Butyl
Fluorocarbon
Fluorosilicone
Fluorosilicone
Fluorosilicone
Natural
Natural
Natural
Natural
Neoprene
Neoprene
Neoprene
Neoprene
Neoprene
Nitrile
Nitrile
Nitrile
Nitrile
Polysulfide
Polysulfide
Polyurethane
Polyurethane
SBR
Silicone
Silicone
Silicone
Silicone
Silicone
TFE PTFE
FEP PTFE
FEP PTFE
FEP PTFE
FEP PTFE
30
50
26
Room
Room
26
Room
25
30
50
23
25
25
38
50
25
30
50
20-30
23
25
32
Room
25
Room
21
32
34
44
25
25
50
75
100
86
122
79
Pentane
Pentane
Pentane
Pentane
Pentane
Pentane
Silicone
Silicone
Silicone
Silicone
Silicone
Silicone
25
30
40
50
60
70
77
86
104
122
140
158
Phenol
Silicone
25
77
8100
Propane
Propane
Propane
Propane
Propane
Propane
Butadiene
Butyl
Natural
Neoprene
Polysulfide
Silicone
25
25
25
25
25
25
77
77
77
77
77
77
22 to 40.5
1.28
126
5.4
1.09
3080
I
I
I
I
I
I
Pyridene
Silicone
25
77
1580
79
77
86
122
73
77
77
100
122
77
86
122
68-86
73
77
90
77
Seals
O-Ring Applications
5700 Handbook
Elastomer
Temperature
F
Sulfur Dioxide
Silicone
Room
Toluene
Silicone
25
Water Vapor
Water Vapor
Ethylene Propylene
Ethylene Propylene (E0692-75)
Room
Room
Xenon
Xenon
Xenon
Xenon
Xenon
Xenon
Xenon
Xenon
Xenon
Xenon
Xenon
Xenon
Xenon
Xenon
Xenon
Xenon
Xenon
Xenon
Xenon
Xenon
Xenon
Xenon
Xenon
Xenon
Xenon
Xenon
Xenon
Xenon
Xenon
Xenon
Xenon
Xenon
Xenon
Xenon
Xenon
Xenon
Xenon
Xenon
Xenon
Xenon
Xenon
Xenon
Xenon
Xenon
Xenon
Butyl
Butyl (B0318-70)
Butyl (B0318-70)
Butyl (B0318-70)
Ethylene Propylene
Ethylene Propylene (E0529-65)
Ethylene Propylene (E0692-75)
Ethylene Propylene (E0692-75)
Ethylene Propylene (E0529-65)
Ethylene Propylene (E0692-75)
Ethylene Propylene
Ethylene Propylene (E0529-65)
Ethylene Propylene (E0692-75)
Fluorocarbon4
Natural
Natural
Neoprene
Neoprene
Nitrile
Nitrile
Nitrile (N0741-75)
Nitrile
Nitrile (N0741-75)
Nitrile
Polyacrylate (A0607-70)
Polyacrylate (A0607-70)
Polyacrylate (A0607-70)
Polyurethane (P0642-70)
Polyurethane (P0648-90)
Polyurethane (P0642-70)
Polyurethane (P0648-90)
Polyurethane (P0642-70)
Polyurethane (P0648-90)
SBR (G0244-70)
SBR (G0244-70)
SBR (G0244-70)
Silicone
Silicone
Silicone (S0684-70)
Silicone
Silicone (S0684-70)
Silicone (S0684-70)
Silicone
Silicone (S0684-70)
PTFE
25
35
82
124
38
40
38
93
94
94
149
155
151
93
25
35
25
38
25
38
38
79
81
121
38
91
153
39
39
66
67
94
94
38
84
122
Room
38
38
93
91
148
149
144
149
77
77
95
180
255
100
104
100
200
202
201
300
311
304
200
77
95
77
100
77
100
101
175
178
250
100
195
307
103
102
151
152
202
201
101
183
251
100
101
200
195
299
300
291
300
Permeability (1)
x 10-8
Source (2)
11250
6850
550 to 3700
550
A
A
.83 to 3.0
.70
6.73
38.1
12.2 to 44.5
44.5
37.8
112 to 214
195
167
260 to 520
520
460
10
17.3 to 32.2
72.5
3.4 to 7.5
40
.60 to 2.85
.94
3.31
7.83 to 36.8
13.2
38.5 to 101
10.9
108
549
2.57
1.03
9.58
6.58
43.0
24.5
14.9
66.2
173
1523
109 to 1220
1220
1290 to 2180
2180
700
1110 (sic) to 2200
2200
5.3
I
A
A
A
A
A
A
A
A
A
A
A
A
A
I
I
I
A
I
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
I
A
A
A
A
A
A
A
A
Seals
5700 Handbook
Section IV
Static O-Ring Sealing
4.0 Introduction ............................................................................................................................................. 4-2
4.1 Surface Finishes for Static O-Ring Seals ......................................................................................... 4-2
4.2 Static Male and Female O-Ring Design ........................................................................................... 4-2
4.3 Face Type O-Ring Seals ................................................................................................................... 4-3
4.4 Dovetail and Half-Dovetail Grooves ................................................................................................ 4-3
4.5 Boss Seals ......................................................................................................................................... 4-3
4.6 Failures and Leakage ........................................................................................................................ 4-3
4.7 O-ring Glands for Industrial Static Seals ......................................................................................... 4-4
Design Chart 4-1 .......................................................................................................................... 4-5
Design Table 4-1 .......................................................................................................................... 4-6
Face Seal Glands ............................................................................................................................. 4-14
Design Chart 4-2 ........................................................................................................................ 4-14
Dovetail Grooves ............................................................................................................................. 4-15
Design Chart 4-3 ........................................................................................................................ 4-15
Half Dovetail Grooves ..................................................................................................................... 4-16
Design Chart 4-4 ........................................................................................................................ 4-16
Tube Fitting Boss Seals MS33649 ............................................................................................. 4-17
Design Table 4-5 ........................................................................................................................ 4-17
Tube Fitting Boss Seals MS33656 ............................................................................................. 4-18
Design Table 4-6 ........................................................................................................................ 4-18
Design Table 4-7 ........................................................................................................................ 4-19
Vacuum Seal Glands ........................................................................................................................ 4-20
Design Chart 4-5 ........................................................................................................................ 4-20
4-1
Seals
5700 Handbook
Static
O-Ring Sealing
4.0 Introduction
It has been said that O-rings are the finest static seals ever
developed. Perhaps the prime reason for this is because
they are almost human proof. No adjustment or human
factor comes into play when O-rings are assembled originally or used in repairs if the gland has been designed and
machined properly. O-rings do not require high bolting
forces (torque) to seal perfectly. O-rings are versatile and
save space and weight. They seal over an exceptionally
wide range of pressures, temperatures and tolerances. Once
seated, they continue to seal even though some feel that they
theoretically should not. In addition, they are economical
and easy to use. Therefore, we agree that the O-ring is the
finest static seal ever developed.
4-2
Seals
5700 Handbook
O-ring
Pressure
The AS568-901 through -932 O-ring sizes (Parkers 3series) are intended to be used for sealing straight thread
tube fittings in a boss. Design Table 4-5 and Design Table
4-6 show the two standard boss designs that are used for this
purpose.
Both of these bosses use the same O-ring, but Parker Seal
Group recommends the Design Table 4-6 design when
there is a choice. It is the newer design, and it has not been
fully accepted yet by industry or by the military though
there is a military standard for it. The 4-6 dimensions
provide for closer tolerance control of the O-ring cavity and
distort the O-ring less when assembled. The improved
tolerance condition assures much less trouble due to leakage resulting from insufficient squeeze or extrusion when
the older cavity is too small. The reduced distortion gives a
longer life.
4-3
Seals
5700 Handbook
Select Closest
Dimension
In Column
Bore Dia.
male gland
B-1
C
G
Plug Dia.
male gland
A
B-1
G
Tube OD
female gland
A-1
D
G
Throat Dia.
female gland
A-1
B
G
Read Horizontally
In Column
To Determine
Dimension For
4-4
Seals
5700 Handbook
Female Gland
1/2 E
1/2 E
(e)
0 to 5
(Typ.)
B Dia.
D Dia.
A-1 Dia.
(A-1 Max. = B Min. +2 L Max.)
Break Corners
Approx. .005 RAD.
W
1/2 E
.005
Typ.
32
W
32
63
63
L Gland
Depth
Pressure
Pressure
W
I.D.
.003 Typ.
G
Section W-W
F Groove
Depth (Ref.)
Gland Detail
Pressure
G1
G2
No
Parbak
Ring
One
Parbak
Ring
Two
Parbak
Rings
Refer to Design Chart 4-1 (below) and Design Table 4-1 for dimensions
W
Cross-Section
Nominal Actual
L
Gland
Depth
Squeeze
Actual
%
E(a)
Diametral
Clearance
G - Groove Width
No Parbak One Parbak Two Parbak
Ring (G)
Ring (G1)
Rings (G2)
R
Groove
Radius
Max.
Eccentricity (b)
004
through
050
1/16
.070
.003
.050
to
.052
.015
to
.023
22
to
32
.002
to
.005
.093
to
.098
.138
to
.143
.205
to
.210
.005
to
.015
.002
102
through
178
3/32
.103
.003
.081
to
.083
.017
to
.025
17
to
24
.002
to
.005
.140
to
.145
.171
to
.176
.238
to
.243
.005
to
.015
.002
201
through
284
1/8
.139
.004
.111
to
.113
.022
to
.032
16
to
23
.003
to
.006
.187
to
.192
.208
to
.213
.275
to
.280
.010
to
.025
.003
309
through
395
3/16
.210
.005
.170
to
.173
.032
to
.045
15
to
21
.003
to
.006
.281
to
.286
.311
to
.316
.410
to
.415
.020
to
.035
.004
425
through
475
1/4
.275
.006
.226
to
.229
.040
to
.055
15
to
20
.004
to
.007
.375
to
.380
.408
to
.413
.538
to
.543
.020
to
.035
.005
(a) Clearance (extrusion gap) must be held to a minimum consistent with design requirements for temperature range variation.
(b) Total indicator reading between groove and adjacent bearing surface.
(c) Reduce maximum diametral clearance 50% when using silicone or fluorosilicone O-rings.
(d) For ease of assembly, when Parbaks are used, gland depth may be increased up to 5%.
Seals
5700 Handbook
+.005
-.000
*
*
*
.103
.136
.170
.042
.055
.069
.106
.137
.150
.181
.212
*
*
*
*
*
.204
.235
.248
.279
.310
.083
.114
.127
.158
.189
.218
.250
.312
.375
.437
.243
.275
.337
.400
.462
*
*
*
*
.341
.373
.435
.498
.560
.220
.252
.314
.377
.439
.600
.662
.725
.787
.850
.500
.562
.625
.687
.750
.525
.587
.650
.712
.775
.623
.685
.748
.810
.873
.502
.564
.627
.689
.752
.937
1.000
1.062
1.125
1.187
.912
.975
1.037
1.100
1.162
.812
.875
.937
1.000
1.062
.837
.900
.962
1.025
1.087
.935
.998
1.060
1.123
1.185
.814
.877
.939
1.002
1.064
1.254
1.316
1.379
1.441
1.504
1.250
1.312
1.375
1.437
1.500
1.225
1.287
1.350
1.412
1.475
1.125
1.187
1.250
1.312
1.375
1.150
1.212
1.275
1.337
1.400
1.248
1.310
1.373
1.435
1.498
1.127
1.189
1.252
1.314
1.377
.013
.013
.015
.015
.018
1.629
1.754
1.879
2.004
2.129
1.625
1.750
1.875
2.000
2.125
1.600
1.725
1.850
1.975
2.100
1.500
1.625
1.750
1.875
2.000
1.525
1.650
1.775
1.900
2.025
1.623
1.748
1.873
1.998
2.123
1.502
1.627
1.752
1.877
2.002
2.114
2.239
2.364
2.489
2.614
.018
.018
.018
.018
.020
2.254
2.379
2.504
2.629
2.754
2.250
2.375
2.500
2.625
2.750
2.225
2.350
2.475
2.600
2.725
2.125
2.250
2.375
2.500
2.625
2.150
2.275
2.400
2.525
2.650
2.248
2.373
2.498
2.623
2.748
2.127
2.252
2.377
2.502
2.627
2.739
2.864
2.989
3.239
3.489
.020
.020
.024
.024
.024
2.879
3.004
3.129
3.379
3.629
2.875
3.000
3.125
3.375
3.625
2.850
2.975
3.100
3.350
3.600
2.750
2.875
3.000
3.250
3.500
2.775
2.900
3.025
3.275
3.525
2.873
2.998
3.123
3.373
3.623
2.752
2.877
3.002
3.252
3.502
Dimensions
Parker
No. 2-
ID
Mean
OD (Ref)
+.002
-.000
-.000
2-001
002
003
.029
.042
.056
.004
.004
.004
.040
.050
.060
.109
.142
.176
.105
.138
.172
.101
.132
.162
004
005
006
007
008
.070
.101
.114
.145
.176
.005
.005
.005
.005
.005
.210
.241
.254
.285
.316
.206
.237
.250
.281
.312
009
010
011
012
013
.208
.239
.301
.364
.426
.005
.005
.005
.005
.005
.348
.379
.441
.504
.566
014
015
016
017
018
.489
.551
.614
.676
.739
.005
.007
.009
.009
.009
019
020
021
022
023
.801
.864
.926
.989
1.051
.009
.009
.009
.010
.010
024
025
026
027
028
1.114
1.176
1.239
1.301
1.364
029
030
031
032
033
Groove Dia.
(Male Gland)
+.001
-.000
Bore Dia.
(Male Gland)
+.000
.001
O-Ring Size
Groove
Width
Throat Dia.
(Female Gland)
B-1
Plug Dia.
(Male Gland)
B
Tube OD
(Female Gland)
A-1
Groove Dia.
(Female Gland)
+.000
-.002
+.000
.040
.053
.067
.044
.059
.077
.002
.181
.212
.225
.256
.287
.081
.112
.125
.156
.187
.343
.375
.437
.500
.562
.318
.350
.412
.475
.537
.629
.691
.754
.816
.879
.625
.687
.750
.812
.875
.941
1.004
1.066
1.129
1.191
.010
.011
.011
.011
.013
1.489
1.614
1.739
1.864
1.989
034
035
036
037
038
039
040
041
042
043
.070
.003
.002
.002
.002
.055
.070
.083
.093
+.005
-.000
This groove width does not permit the use of Parbak rings. For pressures above 103.5 Bar (1500 PSI), consult Design Chart 4-1 for
groove widths where back-up rings must be used.
* These designs require considerable installation stretch. If assembly breakage is incurred, use a compound having higher elongation
or use a two-piece piston.
Design Table 4-1: Gland Dimensions for Industrial O-Ring Static Seals, 103.5 Bar (1500 PSI) Max.
4-6
Seals
5700 Handbook
3.739
3.989
4.239
4.489
4.739
.027
.027
.030
.030
.030
049
050
4.989
5.239
102
103
104
105
106
Mean
OD (Ref)
+.002
-.000
-.000
Groove Dia.
(Male Gland)
+.000
-.002
+.000
3.750
4.000
4.250
4.500
4.750
3.775
4.025
4.275
4.525
4.775
+.000
.001
+.001
-.000
+.005
-.000
3.873
4.123
4.373
4.623
4.873
3.752
4.002
4.252
4.502
4.752
5.123
5.373
5.002
5.252
3.879
4.129
4.379
4.629
4.879
3.875
4.125
4.375
4.625
4.875
3.850
4.100
4.350
4.600
4.850
.037
.037
5.129
5.379
5.125
5.375
5.100
5.350
5.000
5.250
5.025
5.275
.049
.081
.112
.143
.174
.005
.005
.005
.005
.005
.255
.287
.318
.349
.380
.247
.278
.310
.342
.374
.224
.256
.287
.318
.349
.062
.094
.125
.156
.187
.085
.116
.148
.180
.212
*
*
*
*
*
.245
.276
.308
.340
.372
.064
.095
.127
.158
.189
107
108
109
110
111
.206
.237
.299
.362
.424
.005
.005
.005
.005
.005
.412
.443
.505
.568
.630
.405
.437
.500
.562
.625
.381
.412
.474
.537
.599
.219
.250
.312
.375
.437
.243
.275
.338
.400
.463
*
*
*
*
*
.403
.435
.498
.560
.623
.221
.252
.314
.377
.439
112
113
114
115
116
.487
.549
.612
.674
.737
.005
.007
.009
.009
.009
.693
.755
.818
.880
.943
.687
.750
.812
.875
.937
.662
.724
.787
.849
.912
.500
.562
.625
.687
.750
.525
.588
.650
.713
.775
*
*
.685
.748
.810
.873
.935
.502
.564
.627
.689
.752
117
118
119
120
121
.799
.862
.924
.987
1.049
.010
.010
.010
.010
.010
1.005
1.068
1.130
1.193
1.255
1.000
1.062
1.125
1.187
1.250
.974
1.037
1.099
1.162
1.224
.812
.875
.937
1.000
1.062
.838
.900
.963
1.025
1.088
.998
1.060
1.123
1.185
1.248
.814
.877
.939
1.002
1.064
122
123
124
125
126
1.112
1.174
1.237
1.299
1.362
.010
.012
.012
.012
.012
1.318
1.380
1.443
1.505
1.568
1.312
1.375
1.437
1.500
1.562
1.287
1.349
1.412
1.474
1.537
1.125
1.187
1.250
1.312
1.375
1.150
1.213
1.275
1.338
1.400
1.310
1.373
1.435
1.498
1.560
1.127
1.189
1.252
1.314
1.377
127
128
129
130
131
1.424
1.487
1.549
1.612
1.674
.012
.012
.015
.015
.015
1.630
1.693
1.755
1.818
1.880
1.625
1.687
1.750
1.812
1.875
1.599
1.662
1.724
1.787
1.849
1.437
1.500
1.562
1.625
1.687
1.463
1.525
1.588
1.650
1.713
1.623
1.685
1.748
1.810
1.873
1.439
1.502
1.564
1.627
1.689
132
133
134
135
136
1.737
1.799
1.862
1.925
1.987
.015
.015
.015
.017
.017
1.943
2.005
2.068
2.131
2.193
1.937
2.000
2.062
2.125
2.187
1.912
1.974
2.037
2.099
2.162
1.750
1.812
1.875
1.937
2.000
1.775
1.838
1.900
1.963
2.025
1.935
1.998
2.060
2.123
2.185
1.752
1.814
1.877
1.939
2.002
137
2.050
.017
2.256
2.250
2.224
2.062
2.088
2.248
2.064
.070
.003
.103
.003
.002
.002
.002
.002
Groove
Width
044
045
046
047
048
Throat Dia.
(Female Gland)
ID
B-1
Plug Dia.
(Male Gland)
Parker
No. 2-
B
Tube OD
(Female Gland)
Dimensions
A-1
Groove Dia.
(Female Gland)
Bore Dia.
(Male Gland)
O-Ring Size
.093
+.005
-.000
.140
+.005
-.000
This groove width does not permit the use of Parbak rings. For pressures above 103.5 Bar (1500 PSI), consult Design Chart 4-1 for
groove widths where back-up rings must be used.
* These designs require considerable installation stretch. If assembly breakage is incurred, use a compound having higher elongation
or use a two-piece piston.
Design Table 4-1: Gland Dimensions for Industrial O-Ring Static Seals, 103.5 Bar (1500 PSI) Max.
4-7
Seals
5700 Handbook
Groove
Width
2.127
2.189
2.252
2.315
2.377
2.437
2.500
2.562
2.625
2.687
2.463
2.525
2.588
2.650
2.713
2.623
2.685
2.748
2.810
2.873
2.439
2.502
2.564
2.627
2.689
2.750
2.812
2.875
3.000
3.250
2.775
2.838
2.900
3.025
3.275
2.935
2.998
3.060
3.185
3.435
2.752
2.814
2.877
3.002
3.252
3.500
3.750
4.000
4.250
4.500
3.525
3.775
4.025
4.275
4.525
3.685
3.935
4.185
4.435
4.685
3.502
3.752
4.002
4.252
4.502
4.912
5.162
5.412
5.662
5.912
4.750
5.000
5.250
5.500
5.750
4.775
5.025
5.275
5.525
5.775
4.935
5.185
5.435
5.685
5.935
4.752
5.002
5.252
5.502
5.752
6.187
6.437
6.687
6.937
7.187
6.162
6.412
6.662
6.912
7.162
6.000
6.250
6.500
6.750
7.000
6.025
6.275
6.525
6.775
7.025
6.185
6.435
6.685
6.935
7.185
6.002
6.252
6.502
6.752
7.002
7.443
7.693
7.943
8.193
8.443
7.437
7.687
7.937
8.187
8.437
7.412
7.662
7.912
8.162
8.412
7.250
7.500
7.750
8.000
8.250
7.275
7.525
7.775
8.025
8.275
7.435
7.685
7.935
8.185
8.435
7.252
7.502
7.752
8.002
8.252
8.693
8.943
9.193
9.443
9.693
8.687
8.937
9.187
9.437
9.687
8.662
8.912
9.162
9.412
9.662
8.500
8.750
9.000
9.250
9.500
8.525
8.775
9.025
9.275
9.525
8.685
8.935
9.185
9.435
9.685
8.502
8.752
9.002
9.252
9.502
9.943
9.937
9.912
9.750
9.775
9.935
9.752
.449
.512
.574
.437
.500
.562
.409
.472
.534
.187
.250
.312
.215
.278
.340
.434
.497
.559
.190
.253
.315
+.000
138
139
140
141
142
2.112
2.175
2.237
2.300
2.362
.017
.017
.017
.020
.020
2.318
2.381
2.443
2.506
2.568
2.312
2.375
2.437
2.500
2.562
2.287
2.349
2.412
2.474
2.537
2.125
2.187
2.250
2.312
2.375
143
144
145
146
147
2.425
2.487
2.550
2.612
2.675
.020
.020
.020
.020
.022
2.631
2.693
2.756
2.818
2.881
2.625
2.687
2.750
2.812
2.875
2.599
2.662
2.724
2.787
2.849
148
149
150
151
152
2.737
2.800
2.862
2.987
3.237
.022
.022
.022
.024
.024
2.943
3.006
3.068
3.193
3.443
2.937
3.000
3.062
3.187
3.437
2.912
2.974
3.037
3.162
3.412
153
154
155
156
157
3.487
3.737
3.987
4.237
4.487
.024
.028
.028
.030
.030
3.693
3.943
4.193
4.443
4.693
3.687
3.937
4.187
4.437
4.687
3.662
3.912
4.162
4.412
4.662
158
159
160
161
162
4.737
4.987
5.237
5.487
5.737
.030
.035
.035
.035
.035
4.943
5.193
5.443
5.693
5.943
4.937
5.187
5.437
5.687
5.937
163
164
165
166
167
5.987
6.237
6.487
6.737
6.987
.035
.040
.040
.040
.040
6.193
6.443
6.693
6.943
7.193
168
169
170
171
172
7.237
7.487
7.737
7.987
8.237
.045
.045
.045
.045
.050
173
174
175
176
177
8.487
8.737
8.987
9.237
9.487
.050
.050
.050
.055
.055
178
9.737
.055
201
202
203
.171
.234
.296
.005
.005
.005
.139
.004
Mean
OD (Ref)
+.002
-.000
Groove Dia.
(Male Gland)
2.310
2.373
2.435
2.498
2.560
+.000
-.002
.103
.003
2.150
2.213
2.275
2.338
2.400
ID
+.005
-.000
Parker
No. 2-
C
Plug Dia.
(Male Gland)
B-1
+.001
-.000
Dimensions
Tube OD
(Female Gland)
Groove Dia.
(Female Gland)
A-1
+.000
.001
Bore Dia.
(Male Gland)
O-Ring Size
-.000
.002
.002
.002
.002
*
*
*
.140
+.005
-.000
.187
+.005
-.000
This groove width does not permit the use of Parbak rings. For pressures above 103.5 Bar (1500 PSI), consult Design Chart 4-1 for
groove widths where back-up rings must be used.
* These designs require considerable installation stretch. If assembly breakage is incurred, use a compound having higher elongation
or use a two-piece piston.
Design Table 4-1: Gland Dimensions for Industrial O-Ring Static Seals, 103.5 Bar (1500 PSI) Max.
4-8
Seals
5700 Handbook
209
210
211
212
213
.403
.465
.528
.590
.653
.622
.684
.747
.809
.872
.378
.440
.503
.565
.628
.687
.750
.812
.875
.937
.715
.778
.840
.903
.965
.934
.997
1.059
1.122
1.184
.690
.753
.815
.878
.940
1.000
1.062
1.125
1.187
1.250
1.028
1.090
1.153
1.215
1.278
1.247
1.309
1.372
1.434
1.497
1.003
1.065
1.128
1.190
1.253
1.312
1.375
1.437
1.500
1.625
1.340
1.403
1.465
1.528
1.653
1.559
1.622
1.684
1.747
1.872
1.315
1.378
1.440
1.503
1.628
1.972
2.097
2.222
2.347
2.472
1.750
1.875
2.000
2.125
2.250
1.778
1.903
2.028
2.153
2.278
1.997
2.122
2.247
2.372
2.497
1.753
1.878
2.003
2.128
2.253
2.625
2.750
2.875
3.000
3.125
2.597
2.722
2.847
2.972
3.097
2.375
2.500
2.625
2.750
2.875
2.403
2.528
2.653
2.778
2.903
2.622
2.747
2.872
2.997
3.122
2.378
2.503
2.628
2.753
2.878
3.262
3.387
3.512
3.637
3.762
3.250
3.375
3.500
3.625
3.750
3.222
3.347
3.472
3.597
3.722
3.000
3.125
3.250
3.375
3.500
3.028
3.153
3.278
3.403
3.528
3.247
3.372
3.497
3.622
3.747
3.003
3.128
3.253
3.378
3.503
.028
.028
.028
.028
.028
3.887
4.012
4.137
4.262
4.387
3.875
4.000
4.125
4.250
4.375
3.847
3.972
4.097
4.222
4.347
3.625
3.750
3.875
4.000
4.125
3.653
3.778
3.903
4.028
4.153
3.872
3.997
4.122
4.247
4.372
3.628
3.753
3.878
4.003
4.128
.030
.030
.030
.030
4.512
4.637
4.762
4.887
4.500
4.625
4.750
4.875
4.472
4.597
4.722
4.847
4.250
4.375
4.500
4.625
4.278
4.403
4.528
4.653
4.497
4.622
4.747
4.872
4.253
4.378
4.503
4.628
+.002
-.000
-.000
.005
.005
.005
.007
.009
.637
.699
.762
.824
.887
.625
.687
.750
.812
.875
.671
.734
.796
.859
.921
.009
.010
.010
.010
.010
.949
1.012
1.074
1.137
1.199
214
215
216
217
218
.984
1.046
1.109
1.171
1.234
.010
.010
.012
.012
.012
219
220
221
222
223
1.296
1.359
1.421
1.484
1.609
.012
.012
.012
.015
.015
224
225
226
227
228
1.734
1.859
1.984
2.109
2.234
229
230
231
232
233
Groove Dia.
(Male Gland)
+.005
-.000
Mean
OD (Ref)
Tube OD
(Female Gland)
Groove Dia.
(Female Gland)
Groove
Width
.359
.421
.484
.546
.609
Throat Dia.
(Female Gland)
204
205
206
207
208
B-1
Plug Dia.
(Male Gland)
ID
+.001
-.000
Dimensions
Parker
No. 2-
A-1
+.000
.001
Bore Dia.
(Male Gland)
O-Ring Size
+.000
-.002
+.000
.597
.659
.722
.784
.847
.375
.437
.500
.562
.625
.937
1.000
1.062
1.125
1.187
.909
.972
1.034
1.097
1.159
1.262
1.324
1.387
1.449
1.512
1.250
1.312
1.375
1.437
1.500
1.222
1.284
1.347
1.409
1.472
1.574
1.637
1.700
1.762
1.887
1.562
1.625
1.687
1.750
1.875
1.534
1.597
1.659
1.722
1.847
.015
.015
.018
.018
.020
2.012
2.137
2.262
2.387
2.512
2.000
2.125
2.250
2.375
2.500
2.359
2.484
2.609
2.734
2.859
.020
.020
.020
.024
.024
2.637
2.762
2.887
3.012
3.137
234
235
236
237
238
2.984
3.109
3.234
3.359
3.484
.024
.024
.024
.024
.024
239
240
241
242
243
3.609
3.734
3.859
3.984
4.109
244
245
246
247
4.234
4.359
4.484
4.609
.139
.004
.002
.002
.187
+.005
-.000
This groove width does not permit the use of Parbak rings. For pressures above 103.5 Bar (1500 PSI), consult Design Chart 4-1 for
groove widths where back-up rings must be used.
* These designs require considerable installation stretch. If assembly breakage is incurred, use a compound having higher elongation
or use a two-piece piston.
Design Table 4-1: Gland Dimensions for Industrial O-Ring Static Seals, 103.5 Bar (1500 PSI) Max.
4-9
Seals
5700 Handbook
+.005
-.000
4.778
4.903
5.028
5.153
5.278
4.997
5.122
5.247
5.372
5.497
4.753
4.878
5.003
5.128
5.253
5.375
5.500
5.625
5.750
5.875
5.403
5.528
5.653
5.778
5.903
5.622
5.747
5.872
5.997
6.122
5.378
5.503
5.628
5.753
5.878
6.222
6.472
6.722
6.972
7.222
6.000
6.250
6.500
6.750
7.000
6.028
6.278
6.528
6.778
7.028
6.247
6.497
6.747
6.997
7.247
6.003
6.253
6.503
6.753
7.003
7.500
7.750
8.000
8.250
8.500
7.472
7.722
7.972
8.222
8.472
7.250
7.500
7.750
8.000
8.250
7.278
7.528
7.778
8.028
8.278
7.497
7.747
7.997
8.247
8.497
7.253
7.503
7.753
8.003
8.253
8.762
9.012
9.262
9.512
9.762
8.750
9.000
9.250
9.500
9.750
8.722
8.972
9.222
9.472
9.722
8.500
8.750
9.000
9.250
9.500
8.528
8.778
9.028
9.278
9.528
8.747
8.997
9.247
9.497
9.747
8.503
8.753
9.003
9.253
9.503
.055
.055
.055
.065
.065
10.012
10.262
10.762
11.262
11.762
10.000
10.250
10.750
11.250
11.750
9.972
10.222
10.722
11.222
11.722
9.750
10.000
10.500
11.000
11.500
9.778
10.028
10.528
11.028
11.528
9.997
10.247
10.747
11.247
11.747
9.753
10.003
10.503
11.003
11.503
11.984
12.984
13.984
14.984
15.955
.065
.065
.065
.065
.075
12.262
13.262
14.262
15.262
16.233
12.250
13.250
14.250
15.250
16.250
12.222
13.222
14.222
15.222
16.222
12.000
13.000
14.000
15.000
16.000
12.028
13.028
14.028
15.028
16.028
12.247
13.247
14.247
15.247
16.247
12.003
13.003
14.003
15.003
16.003
283
284
16.955
17.955
.080
.085
17.233
18.233
17.250
18.250
17.222
18.222
17.000
18.000
17.028
18.028
17.247
18.247
17.003
18.003
309
310
311
312
313
.412
.475
.537
.600
.662
.005
.005
.007
.009
.009
.832
.895
.957
1.020
1.082
.812
.875
.937
1.000
1.062
.777
.840
.902
.965
1.027
.437
.500
.562
.625
.687
.472
.535
.597
.660
.722
.809
.872
.934
.997
1.059
.440
.503
.565
.628
.690
314
.725
.010
1.145
1.125
1.090
.750
.785
1.122
.753
Dimensions
Parker
No. 2-
ID
+.000
-.002
+.000
248
249
250
251
252
4.734
4.859
4.984
5.109
5.234
.030
.035
.035
.035
.035
5.012
5.137
5.262
5.387
5.512
5.000
5.125
5.250
5.375
5.500
4.972
5.097
5.222
5.347
5.472
4.750
4.875
5.000
5.125
5.250
253
254
255
256
257
5.359
5.484
5.609
5.734
5.859
.035
.035
.035
.035
.035
5.637
5.762
5.887
6.012
6.137
5.625
5.750
5.875
6.000
6.125
5.597
5.722
5.847
5.972
6.097
258
259
260
261
262
5.984
6.234
6.484
6.734
6.984
.035
.040
.040
.040
.040
6.262
6.512
6.762
7.012
7.262
6.250
6.500
6.750
7.000
7.250
263
264
265
266
267
7.234
7.484
7.734
7.984
8.234
.045
.045
.045
.045
.050
7.512
7.762
8.012
8.262
8.512
268
269
270
271
272
8.484
8.734
8.984
9.234
9.484
.050
.050
.050
.055
.055
273
274
275
276
277
9.734
9.984
10.484
10.984
11.484
278
279
280
281
282
.139
.004
.210
.005
Mean
OD (Ref)
+.002
-.000
Groove Dia.
(Male Gland)
+.001
-.000
Bore Dia.
(Male Gland)
+.000
.001
O-Ring Size
Groove
Width
Throat Dia.
(Female Gland)
B-1
Plug Dia.
(Male Gland)
B
Tube OD
(Female Gland)
A-1
Groove Dia.
(Female Gland)
-.000
.002
.004
.002
.004
*
*
*
.187
+.005
-.000
.281
+.005
-.000
This groove width does not permit the use of Parbak rings. For pressures above 103.5 Bar (1500 PSI), consult Design Chart 4-1 for
groove widths where back-up rings must be used.
* These designs require considerable installation stretch. If assembly breakage is incurred, use a compound having higher elongation
or use a two-piece piston.
Design Table 4-1: Gland Dimensions for Industrial O-Ring Static Seals, 103.5 Bar (1500 PSI) Max.
4-10
Seals
5700 Handbook
+.005
-.000
.847
.910
.972
1.035
1.097
1.184
1.247
1.309
1.372
1.434
.815
.878
.940
1.003
1.065
1.125
1.187
1.250
1.312
1.375
1.160
1.222
1.285
1.347
1.410
1.497
1.559
1.622
1.684
1.747
1.128
1.190
1.253
1.315
1.378
1.840
1.965
2.090
2.215
2.340
1.500
1.625
1.750
1.875
2.000
1.535
1.660
1.785
1.910
2.035
1.872
1.997
2.122
2.247
2.372
1.503
1.628
1.753
1.878
2.003
2.500
2.625
2.750
2.875
3.000
2.465
2.590
2.715
2.840
2.965
2.125
2.250
2.375
2.500
2.625
2.160
2.285
2.410
2.535
2.660
2.497
2.622
2.747
2.872
2.997
2.128
2.253
2.378
2.503
2.628
3.145
3.270
3.395
3.520
3.645
3.125
3.250
3.375
3.500
3.625
3.090
3.215
3.340
3.465
3.590
2.750
2.875
3.000
3.125
3.250
2.785
2.910
3.035
3.160
3.285
3.122
3.247
3.372
3.497
3.622
2.753
2.878
3.003
3.128
3.253
.024
.024
.028
.028
.028
3.770
3.895
4.020
4.145
4.270
3.750
3.875
4.000
4.125
4.250
3.715
3.840
3.965
4.090
4.215
3.375
3.500
3.625
3.750
3.875
3.410
3.535
3.660
3.785
3.910
3.747
3.872
3.997
4.122
4.247
3.378
3.502
3.628
3.753
3.878
3.975
4.100
4.225
4.350
4.475
.028
.028
.030
.030
.030
4.395
4.520
4.645
4.770
4.895
4.375
4.500
4.625
4.750
4.875
4.340
4.465
4.590
4.717
4.840
4.000
4.125
4.250
4.375
4.500
4.035
4.160
4.285
4.410
4.535
4.372
4.497
4.622
4.747
4.872
4.003
4.128
4.253
4.378
4.503
350
351
352
353
354
4.600
4.725
4.850
4.975
5.100
.030
.030
.030
.037
.037
5.020
5.145
5.270
5.395
5.520
5.000
5.125
5.250
5.375
5.500
4.965
5.090
5.215
5.340
5.465
4.625
4.750
4.875
5.000
5.125
4.660
4.785
4.910
5.035
5.160
4.997
5.122
5.247
5.372
5.497
4.628
4.753
4.878
5.003
5.128
355
356
357
358
5.225
5.350
5.475
5.600
.037
.037
.037
.037
5.645
5.770
5.895
6.020
5.625
5.750
5.875
6.000
5.590
5.715
5.840
5.965
5.250
5.375
5.500
5.625
5.285
5.410
5.535
5.660
5.622
5.747
5.872
5.997
5.253
5.378
5.503
5.628
Dimensions
Parker
No. 2-
ID
315
316
317
318
319
.787
.850
.912
.975
1.037
.010
.010
.010
.010
.010
1.207
1.270
1.332
1.395
1.457
1.187
1.250
1.312
1.375
1.437
320
321
322
323
324
1.100
1.162
1.225
1.287
1.350
.012
.012
.012
.012
.012
1.520
1.582
1.645
1.707
1.770
325
326
327
328
329
1.475
1.600
1.725
1.850
1.975
.015
.015
.015
.015
.018
330
331
332
333
334
2.100
2.225
2.350
2.475
2.600
.018
.018
.018
.020
.020
335
336
337
338
339
2.725
2.850
2.975
3.100
3.225
.020
.020
.024
.024
.024
340
341
342
343
344
3.350
3.475
3.600
3.725
3.850
345
346
347
348
349
.210
.005
Mean
OD (Ref)
+.002
-.000
Groove Dia.
(Male Gland)
+.001
-.000
Bore Dia.
(Male Gland)
+.000
.001
O-Ring Size
Groove
Width
Throat Dia.
(Female Gland)
B-1
Plug Dia.
(Male Gland)
B
Tube OD
(Female Gland)
A-1
Groove Dia.
(Female Gland)
+.000
-.002
+.000
1.152
1.215
1.277
1.340
1.402
.812
.875
.937
1.000
1.062
1.500
1.562
1.625
1.687
1.750
1.465
1.527
1.590
1.652
1.715
1.895
2.020
2.145
2.270
2.395
1.875
2.000
2.125
2.250
2.375
2.520
2.645
2.770
2.895
3.020
-.000
.004
.004
.281
+.005
-.000
This groove width does not permit the use of Parbak rings. For pressures above 103.5 Bar (1500 PSI), consult Design Chart 4-1 for
groove widths where back-up rings must be used.
* These designs require considerable installation stretch. If assembly breakage is incurred, use a compound having higher elongation
or use a two-piece piston.
Design Table 4-1: Gland Dimensions for Industrial O-Ring Static Seals, 103.5 Bar (1500 PSI) Max.
4-11
Seals
5700 Handbook
+.005
-.000
5.785
5.910
6.035
6.285
6.535
6.122
6.247
6.372
6.622
6.872
5.753
5.878
6.003
6.253
6.503
6.750
7.000
7.250
7.500
7.750
6.785
7.035
7.285
7.535
7.785
7.122
7.372
7.622
7.872
8.122
6.753
7.003
7.253
7.503
7.753
8.340
8.590
8.840
9.090
9.340
8.000
8.250
8.500
8.750
9.000
8.035
8.285
8.535
8.785
9.035
8.372
8.622
8.872
9.122
9.372
8.003
8.253
8.503
8.753
9.003
9.625
9.875
10.125
10.375
10.875
9.590
9.840
10.090
10.340
10.840
9.250
9.500
9.750
10.000
10.500
9.285
9.535
9.785
10.035
10.535
9.622
9.872
10.122
10.372
10.872
9.253
9.503
9.753
10.003
10.503
11.395
11.895
12.395
13.395
14.395
11.375
11.875
12.375
13.375
14.375
11.340
11.840
12.340
13.340
14.340
11.000
11.500
12.000
13.000
14.000
11.035
11.535
12.035
13.035
14.035
11.372
11.872
12.372
13.372
14.372
11.003
11.503
12.003
13.003
14.003
.070
.075
.080
.085
.090
15.395
16.375
17.375
18.375
19.373
15.375
16.375
17.375
18.375
19.375
15.340
16.340
17.340
18.340
19.340
15.000
16.000
17.000
18.000
19.000
15.035
16.035
17.035
18.035
19.035
15.372
16.372
17.372
18.372
19.372
15.003
16.003
17.003
18.003
19.003
19.955
20.955
21.955
22.940
23.940
.095
.095
.100
.105
.110
20.373
21.373
22.373
23.360
24.360
20.375
21.375
22.375
23.375
24.375
20.340
21.340
22.340
23.340
24.340
20.000
21.000
22.000
23.000
24.000
20.035
21.035
22.035
23.035
24.035
20.372
21.372
22.372
23.372
24.372
20.003
21.003
22.003
23.003
24.003
394
395
24.940
25.940
.115
.120
25.360
26.360
25.375
26.375
25.340
26.340
25.000
26.000
25.035
26.035
25.372
26.372
25.003
26.003
425
426
427
428
429
4.475
4.600
4.725
4.850
4.975
.033
.033
.033
.033
.037
5.025
5.150
5.275
5.400
5.525
5.000
5.125
5.250
5.375
5.500
4.952
5.077
5.202
5.327
5.452
4.500
4.625
4.750
4.875
5.000
4.548
4.673
4.798
4.923
5.048
4.996
5.121
5.246
5.371
5.496
4.504
4.629
4.754
4.879
5.004
430
431
5.100
5.225
.037
.037
5.650
5.775
5.625
5.750
5.577
5.702
5.125
5.250
5.173
5.298
5.621
5.746
5.129
5.254
Dimensions
Parker
No. 2-
ID
+.000
-.002
+.000
359
360
361
362
363
5.725
5.850
5.975
6.225
6.475
.037
.037
.037
.040
.040
6.145
6.270
6.395
6.645
6.895
6.125
6.250
6.375
6.625
6.875
6.090
6.215
6.340
6.590
6.840
5.750
5.875
6.000
6.250
6.500
364
365
366
367
368
6.725
6.975
7.225
7.475
7.725
.040
.040
.045
.045
.045
7.145
7.395
7.645
7.895
8.145
7.125
7.375
7.625
7.875
8.125
7.090
7.340
7.590
7.840
8.090
369
370
371
372
373
7.975
8.225
8.475
8.725
8.975
.045
.050
.050
.050
.050
8.395
8.645
8.895
9.145
9.395
8.375
8.625
8.875
9.125
9.375
374
375
376
377
378
9.225
9.475
9.725
9.975
10.475
.055
.055
.055
.055
.060
9.645
9.895
10.145
10.395
10.895
379
380
381
382
383
10.975
11.475
11.975
12.975
13.975
.060
.065
.065
.065
.070
384
385
386
387
388
14.975
15.955
16.955
17.955
18.955
389
390
391
392
393
.210
.005
.275
.006
Mean
OD (Ref)
+.002
-.000
Groove Dia.
(Male Gland)
+.001
-.000
Bore Dia.
(Male Gland)
+.000
.001
O-Ring Size
Groove
Width
Throat Dia.
(Female Gland)
B-1
Plug Dia.
(Male Gland)
B
Tube OD
(Female Gland)
A-1
Groove Dia.
(Female Gland)
-.000
.004
.004
.004
.004
.281
+.005
-.000
.375
+.005
-.000
This groove width does not permit the use of Parbak rings. For pressures above 103.5 Bar (1500 PSI), consult Design Chart 4-1 for
groove widths where back-up rings must be used.
* These designs require considerable installation stretch. If assembly breakage is incurred, use a compound having higher elongation
or use a two-piece piston.
Design Table 4-1: Gland Dimensions for Industrial O-Ring Static Seals, 103.5 Bar (1500 PSI) Max.
4-12
Seals
5700 Handbook
+.005
-.000
5.423
5.548
5.673
5.798
5.923
5.871
5.996
6.121
6.246
6.371
5.379
5.504
5.629
5.754
5.879
6.000
6.250
6.500
6.750
7.000
6.048
6.298
6.548
6.798
7.048
6.496
6.746
6.996
7.246
7.496
6.004
6.254
6.504
6.754
7.004
7.702
7.952
8.202
8.452
8.952
7.250
7.500
7.750
8.000
8.500
7.298
7.548
7.798
8.048
8.548
7.746
7.996
8.246
8.496
8.996
7.254
7.504
7.754
8.004
8.504
9.500
10.000
10.500
11.000
11.500
9.452
9.952
10.452
10.952
11.452
9.000
9.500
10.000
10.500
11.000
9.048
9.548
10.048
10.548
11.048
9.496
9.996
10.496
10.996
11.496
9.004
9.504
10.000
10.504
11.004
12.025
12.525
13.025
13.525
14.025
12.000
12.500
13.000
13.500
14.000
11.952
12.452
12.952
13.452
13.952
11.500
12.000
12.500
13.000
13.500
11.548
12.048
12.548
13.048
13.548
11.996
12.496
12.996
13.496
13.996
11.504
12.004
12.504
13.004
13.504
.070
.070
.070
.070
.075
14.525
15.025
15.525
16.025
16.505
14.500
15.000
15.500
16.000
16.500
14.452
14.952
15.452
15.952
16.452
14.000
14.500
15.000
15.500
16.000
14.048
14.548
15.048
15.548
16.048
14.496
14.996
15.496
15.996
16.496
14.004
14.504
15.004
15.504
16.004
16.455
16.955
17.455
17.955
18.455
.075
.080
.085
.085
.085
17.005
17.505
18.005
18.505
19.005
17.000
17.500
18.000
18.500
19.000
16.952
17.452
17.952
18.452
18.952
16.500
17.000
17.500
18.000
18.500
16.548
17.048
17.548
18.048
18.548
16.996
17.496
17.996
18.496
18.996
16.504
17.004
17.504
18.004
18.504
467
468
469
470
471
18.955
19.455
19.955
20.955
21.955
.090
.090
.095
.095
.100
19.505
20.005
20.505
21.505
22.505
19.500
20.000
20.500
21.500
22.500
19.452
19.952
20.452
21.452
22.452
19.000
19.500
20.000
21.000
22.000
19.048
19.548
20.048
21.048
22.048
19.496
19.996
20.496
21.496
22.496
19.004
19.504
20.004
21.004
22.004
472
473
474
475
22.940
23.940
24.940
25.940
.105
.110
.115
.120
23.490
24.490
25.490
26.490
23.500
24.500
25.500
26.500
23.452
24.452
25.452
26.452
23.000
24.000
25.000
26.000
23.048
24.048
25.048
26.048
23.496
24.496
25.496
26.496
23.004
24.004
25.004
26.004
Dimensions
Parker
No. 2-
ID
+.000
-.002
+.000
432
433
434
435
436
5.350
5.475
5.600
5.725
5.850
.037
.037
.037
.037
.037
5.900
6.025
6.150
6.275
6.400
5.875
6.000
6.125
6.250
6.375
5.827
5.952
6.077
6.202
6.327
5.375
5.500
5.625
5.750
5.875
437
438
439
440
441
5.975
6.225
6.475
6.725
6.975
.037
.040
.040
.040
.040
6.525
6.775
7.025
7.275
7.525
6.500
6.750
7.000
7.250
7.500
6.452
6.702
6.952
7.202
7.452
442
443
444
445
446
7.225
7.475
7.725
7.975
8.475
.045
.045
.045
.045
.055
7.775
8.025
8.275
8.525
9.025
7.750
8.000
8.250
8.500
9.000
447
448
449
450
451
8.975
9.475
9.975
10.475
10.975
.055
.055
.055
.060
.060
9.525
10.025
10.525
11.025
11.525
452
453
454
455
456
11.475
11.975
12.475
12.975
13.475
.060
.060
.060
.060
.070
457
458
459
460
461
13.975
14.475
14.975
15.475
15.955
462
463
464
465
466
.275
.006
Mean
OD (Ref)
+.002
-.000
Groove Dia.
(Male Gland)
+.001
-.000
Bore Dia.
(Male Gland)
+.000
.001
O-Ring Size
Groove
Width
Throat Dia.
(Female Gland)
B-1
Plug Dia.
(Male Gland)
B
Tube OD
(Female Gland)
A-1
Groove Dia.
(Female Gland)
-.000
.004
.004
.375
+.005
-.000
This groove width does not permit the use of Parbak rings. For pressures above 103.5 Bar (1500 PSI), consult Design Chart 4-1 for
groove widths where back-up rings must be used.
* These designs require considerable installation stretch. If assembly breakage is incurred, use a compound having higher elongation
or use a two-piece piston.
Design Table 4-1: Gland Dimensions for Industrial O-Ring Static Seals, 103.5 Bar (1500 PSI) Max.
4-13
Seals
5700 Handbook
Section W-W
0 to 5
(Typ.)
Break Corners
Approx. .005 RAD.
.005
Max.
X
R
63
63
Surface finish X:
32 for liquids
16 for vacuum
and gases
Groove
Depth
(= Gland Depth)
I.D.
.003 Max.
G
Gland Detail
Finishes are RMS values
W
Cross Section
G
Groove Width
Squeeze
Gland
Depth
Actual
Liquids
Vacuum
and Gases
Groove
Radius
.070
.003
.050
to
.054
.013
to
.023
19
to
32
.101
to
.107
.084
to
.089
.005
to
.015
3/32
.103
.003
.074
to
.080
.020
to
.032
20
to
30
.136
to
.142
.120
to
.125
.005
to
.015
201
through
284
1/8
.139
.004
.101
to
.107
.028
to
.042
20
to
30
.177
to
.187
.158
to
.164
.010
to
.025
309
through
395
3/16
.210
.005
.152
to
.162
.043
to
.063
21
to
30
.270
to
.290
.239
to
.244
.020
to
.035
425
through
475
1/4
.275
.006
.201
to
.211
.058
to
.080
21
to
29
.342
to
.362
.309
to
.314
.020
to
.035
Special
3/8
.375
.007
.276
to
.286
.082
to
.108
22
to
28
.475
to
.485
.419
to
.424
.030
to
.045
Special
1/2
.500
.008
.370
to
.380
.112
to
.138
22
to
27
.638
to
.645
.560
to
.565
.030
to
.045
Nominal
Actual
004
through
050
1/16
102
through
178
Design Chart 4-2: Design Chart for O-Ring Face Seal Glands
4-14
Seals
5700 Handbook
66
R1
Mean Groove
Diameter Coincides
With Mean
O-ring Diameter.
W
Cross Section
L
Gland
Depth
Squeeze
%
Nominal
Actual
004
through
050
1/16
.070
.003
.050
to
.052
27
102
through
178
3/32
.103
.003
.081
to
.083
201
through
284
1/8
.139
.004
309
through
395
3/16
425
through
475
Special
G
Gland Width
(To sharp
corner)
R1
.055
to
.059
.005
1/64
21
.083
to
.087
.010
1/64
.111
to
.113
20
.113
to
.117
.010
1/32
.210
.005
.171
to
.173
18
.171
to
.175
.015
1/32
1/4
.275
.006
.231
to
.234
16
.231
to
.235
.015
1/16
3/8
.375
.007
.315
to
.319
16
.315
to
.319
.020
3/32
NOTE: These design recommendations assume metal-to-metal contact. In special applications, for example in the semiconductor
industry, deviation from these recommendations may be necessary. When designing with ParofluorTM elastomers, one should take into
consideration that perfluorinated elastomers may require more squeeze than an FKM material to obtain optimum sealing performance.
To increase squeeze, modifications of the design recommendations shown above are necessary.
4-15
Seals
5700 Handbook
L
66
Mean Groove
Diameter Coincides
With Mean
O-ring Diameter.
R1
W
Cross Section
L
Gland
Depth
Squeeze
%
Nominal
Actual
004
through
050
1/16
.070
.003
.052
to
.054
25
102
through
178
3/32
.103
.003
.083
to
.085
201
through
284
1/8
.139
.004
309
through
395
3/16
425
through
475
Special
G
Gland Width
(To sharp
corner)
R1
.064
to
.066
.005
1/64
19
.095
to
.097
.010
1/64
.113
to
.115
18
.124
to
.128
.010
1/32
.210
.005
.173
to
.176
17
.171
to
.175
.015
1/32
1/4
.275
.006
.234
to
.238
15
.255
to
.257
.015
1/16
3/8
.375
.007
.319
to
.323
14
.350
to
.358
.020
3/32
NOTE: These design recommendations assume metal-to-metal contact. In special applications, for example in the semiconductor
industry, deviation from these recommendations may be necessary. When designing with ParofluorTM elastomers, one should take into
consideration that perfluorinated elastomers may require more squeeze than an FKM material to obtain optimum sealing performance.
To increase squeeze, modifications of the design recommendations shown above are necessary.
4-16
Seals
5700 Handbook
125
120
0 30'
Height to
Suit Design
To G
32
Surf. K
Detail A
D Dia. to E Depth
32
B
J
.020R
Max.
45 5
Min. Clearance
Envelope for Fitting
Detail A
C
Min. Dia. for unrestricted
flow of fluid may be any
size or shape provided
clearance is maintained to
J depth for fitting.
Design Table 4-5 Boss Dimensions for Military Straight Thread Tube Fitting O-ring
Gaskets per MS33649 (Supersedes AND10049 and AND10050)
Parker
O-ring
Size
No.*
Actual O-Ring
Dimensions
W
ID
Equiv.
Tube Tube
A
Dia.
B
Full
D
Dia.
+.015
-.000
Dia.
Min.
Min.
0.063
0.602
0.665
0.577
0.583
0.728
0.656
Dash
No.
OD
Min.
Thread T
Per Mil-S-8879
+.015
-.000
Thd.
Depth
Dia.
+.005
-.000
0.482
0.538
0.062
0.125
0.328
0.390
0.172
0.454
0.234
0.517
3-902
3-903
.064 .003
.064 .003
.239 .005
.301 .005
2
3
.125
.188
.3125-24UNJF-3B
.3750-24UNJF-3B
0.438
0.500
3-904
.072 .003
.351 .005
.250
.4375-20UNJF-3B
0.562
3-905
.072 .003
.414 .005
.312
.5000-20UNJF-3B
0.625
3-906
.078 .003
.468 .005
.375
.5625-18UNJF-3B
0.688
0.598
0.297
0.580
3-907
.082 .003
.530 .007
.438
.6250-18UNJF-3B
0.750
0.614
0.360
0.643
3-908
.087 .003
.644 .009
.500
.7500-16UNJF-3B
0.875
0.714
0.391
0.769
3-909
.097 .003
.706 .009
.562
.8125-16UNJF-3B
0.938
0.730
0.438
0.832
3-910
.097 .003
.755 .009
10
.625
.8750-14UNJF-3B
1.000
0.802
0.484
0.896
3-911
.116 .004
.863 .009
11
.688
1.0000-12UNJF-3B
1.156
0.547
1.023
1.352
3-912
.116 .004
.924 .009
12
.750
1.0625-12UNJF-3B
1.234
0.609
1.086
1.415
3-914
.116 .004
1.047 .010
14
.875
1.1875-12UNJF-3B
1.362
0.734
1.211
1.540
3-916
.116 .004
1.171 .010
16
1.000
1.3125-12UNJF-3B
1.487
3-918
.116 .004
1.355 .012
18
1.125
1.5000-12UNJF-3B
1.675
0.568
0.877
0.844
1.336
0.953
1.524
0.075
0.083
0.094
0.107
0.003
0.790
0.852
0.709
0.915
0.725
1.040
0.834
1.102
0.850
1.165
0.960
0.004
0.005
1.064
1.665
0.125
1.790
1.116
3-920
.118 .004
1.475 .014
20
1.250
1.6250-12UNJF-3B
1.800
1.078
1.648
1.978
3-924
.118 .004
1.720 .014
24
1.500
1.8750-12UNJF-3B
2.050
1.312
1.898
2.228
1.127
3-928
.118 .004
2.090 .018
28
1.750
2.2500-12UNJF-3B
2.425
1.547
2.273
2.602
1.243
3-932
.118 .004
2.337 .018
32
2.000
2.5000-12UNJF-3B
2.675
1.781
2.524
2.852
1.368
0.907
0.008
0.010
Design Table 4-5: Boss Dimensions for Military Straight Thread Tube Fitting O-ring Gaskets per MS33649 (Supersedes
AND10049 and AND10050)
4-17
Seals
5700 Handbook
45 5
.031
.016
RAD
Squareness between
thread T and face of
hex shall not exceed
H at measured at
diameter K
Thread
T
Design Table 4-6 Fitting End MS33656 Used with MS16142 and MS33649 Bosses
(Only the dimensions that define the O-ring Cavity are shown below.)
O-ring
Parker
Tubing
Size No.
OD
3-902
3-903
1/8
3/16
5/16-24
3/8-24
3-904
1/4
7/16-20
3-905
5/16
1/2-20
3-906
3/8
9/16-18
.813
.481
3-908
1/2
3/4-16
1.000
3-910
5/8
7/8-14
1.125
3-912
3/7
1 1/16-12
1.375
3-914*
7/8
1 3/16-12
3-916
1 5/16-12
3-920
1 1/4
1 5/8-12
1.875
3-924
1 1/2
1 7/8-12
2.125
3-932
2 1/2-12
2.750
Thread
E Dimension
Across Hex
F
+.002
K
Dia.
Q
+.015
Flats
-.003
Max.
.010
-.000
.549
.611
.063
.063
.674
.075
T
.563
.625
UNJF-3A
.250
.312
.688
+.003
.364
.750
-.004
.426
1.500
UNJ-3A
1.625
.005
.736
.075
.799
.083
.660
.986
.094
.773
1.111
.107
.945
1.361
1.070
1.475
.016
1.195
.008
1.599
1.507
1.879
.020
1.756
2.095
2.381
2.718
.125
*No fitting end for the 3-914 O-ring size is included in MS33656, but the dimensions shown here follow the same pattern.
Design Table Table 4-6: Fitting End MS33656 Used With MS16142 and MS33649 Bosses (only the dimensions that define
the O-ring cavity are shown.)
4-18
Seals
5700 Handbook
F
L
Minimum Spotface
Diameter
D Dia.
Min. Boss
Height
Detail "A"
.010
Rad.
.005
J
100
E
THD. T
45 5
C Dia. this dim. applies
only when tap drill can
not pass thru entire boss
Detail A
Finished tapered counterbore (Detail A) shall be be free from longitudinal and spiral tool marks.
Annular tool marks up to 100 micro-inches maximum will be permissible.
Design Table 4-7 Boss Dimensions for Industrial Straight Thread Tube Fittings
Parker
O-ring
Size No.
Actual
O-Ring Dimensions
W
ID
Tube
Thread
B
Min.
Thread
OD
Depth
Min.
-.000
-.000
Min.
Min.
Min.
+.005 +.015
3-902
.064 .003
.239 .005
1/8
5/16-24
.390
.062
.358
.074
.672
.468
12
.438
3-903
.064 .003
.301 .005
3/16
3/8-24
.390
.125
.421
.074
.750
.468
12
.500
3-904
.072 .003
.351 .005
1/4
7/16-20
.454
.172
.487
.093
.828
.547
12
.563
3-905
.072 .003
.414 .005
5/16
1/2-20
.454
.234
.550
.093
.969
.547
12
.625
3-906
.078 .003
.468 .005
3/8
9/16-18
.500
.297
.616
.097
.909
.609
12
.688
3-908
.087 .003
.644 .009
1/2
3/4-16
.562
.391
.811
.100
1.188
.688
15
.875
3-910
.097 .003
.755 .009
5/8
7/8-14
.656
.484
.942
.100
1.344
.781
15
1.000
1 1/16-12
.750
.609
1.148
.130
1.625
.906
15
1.250
3-912
.116 .004
.924 .009
3/4
3-913
.116 .004
.986 .010
13/16
3-914
.116 .004
1.047 .010
7/8
1 3-16-12
3-916
.116 .004
1.171 .010
1 5/16-12
UNF-2B
UN-2B
.750
.719
1.273
.130
1.765
.906
15
1.375
.750
.844
1.398
.130
1.910
.906
15
1.500
3-918
.116 .004
1.355 .012
1 1/8
3-920
.118 .004
1.475 .014
1 1/4
1 5/8-12
.750
1.078
1.713
.132
2.270
.906
15
1.875
3-941
.118 .004
1.720 .014
1 1/2
1 7/8-12
.750
1.312
1.962
.132
2.560
.906
15
2.125
3-932
.118 .004
2.337 .018
2 1/2-12
.750
1.781
2.587
.132
3.480
.906
15
2.750
Design Table 4-7: Boss Dimensions for Industrial Straight Thread Tube Fitting O-ring Gaskets Per SAE J1926 and
MS16142
4-19
Seals
5700 Handbook
Female Gland
E
Gland Detail
0 to 5
(Typ.)
Break Corners
Approx. .005 Rad.
1/2E
.005
Typ.
16
32
32
R
16
Gland
Depth
I.D.
.003 Typ.
Section W-W
F Groove
Depth (Ref.)
W
Cross-Section
Nominal
Actual
L
Gland
Depth
E
Squeeze
Actual
%
Diametral
Clearance
G
Groove
Width
R
Groove
Radius
Max.*
Eccentricity
004
through
050
1/16
.070
.003
.050
to
.052
.015
to
.023
22
to
32
.002
to
.005
.093
to
.098
.005
to
.015
.002
102
through
178
3/32
.103
.003
.081
to
.083
.017
to
.025
17
to
24
.002
to
.005
.140
to
.145
.005
to
.015
.002
201
through
284
1/8
.139
.004
.111
to
.113
.022
to
.032
16
to
23
.003
to
.006
.187
to
.192
.010
to
.025
.003
309
through
395
3/16
.210
.005
.170
to
.173
.032
to
.045
15
to
21
.003
to
.006
.281
to
.286
.020
to
.035
.004
425
through
475
1/4
.275
.006
.226
to
.229
.040
to
.055
15
to
20
.004
to
.007
.375
to
.380
.020
to
.035
.005
Design Chart 4-5: Design Chart for Static Vacuum Seal Glands
4-20
Seals
5700 Handbook
Section V
Dynamic O-Ring Sealing
5.1 Introduction ............................................................................................................................................. 5-3
5.2 Hydraulic Reciprocating O-Ring Seals ................................................................................................... 5-3
5.3 Surface Finishes ...................................................................................................................................... 5-4
5.4 Temperature Effects on Dynamic Seals .................................................................................................. 5-6
5.5 Side Loads ............................................................................................................................................... 5-7
5.6 Direction of Pressure ............................................................................................................................... 5-7
5.7 Shock Loads and Pressures ..................................................................................................................... 5-7
5.8 High Frequency Motion or Vibration ...................................................................................................... 5-7
5.9 Squeeze ................................................................................................................................................... 5-7
5.10 Stretch ................................................................................................................................................... 5-8
5.11 Friction .................................................................................................................................................. 5-8
5.11.1 Break-Out Friction ...................................................................................................................... 5-8
5.11.2 Running Friction .......................................................................................................................... 5-8
5.12 Calculate Rubbing Surface ................................................................................................................... 5-9
5.13 Methods to Reduce Friction ................................................................................................................ 5-11
5.14 Friction and Wear ................................................................................................................................ 5-11
5.14.1 Friction ...................................................................................................................................... 5-11
5.14.2 Pneumatic Seals ......................................................................................................................... 5-13
5.14.3 Wear ........................................................................................................................................... 5-14
5.14.4 Interdependence of Friction Wear and an Effective Seal........................................................... 5-14
5.15 Spiral Failure ....................................................................................................................................... 5-15
5.15.1 Speed of Stroke .......................................................................................................................... 5-16
5.15.2 Lack of Lubrication ................................................................................................................... 5-16
5.15.3 Pressure Differential and Direction ........................................................................................... 5-16
5.15.4 Squeeze ...................................................................................................................................... 5-16
5.15.5 Shape of Groove and Split Groove ............................................................................................ 5-16
5.15.6 Temperature of Operation .......................................................................................................... 5-16
5.15.7 Length of Stroke ........................................................................................................................ 5-16
5.15.8 Surface Finish ............................................................................................................................ 5-16
5.15.9 Back-Up Rings .......................................................................................................................... 5-17
5.16 Modifications for Special Applications ............................................................................................... 5-17
5.16.1 Small Amount of Leakage ......................................................................................................... 5-17
5.16.2 Early Stress-Aging .................................................................................................................... 5-17
5.16.3 Low Temperature Leakage ........................................................................................................ 5-17
5.16.4 Excessive Swell (above 20%) .................................................................................................... 5-17
5.17 Gland Dimensions for Reciprocating Hydraulic O-Ring Seals .......................................................... 5-17
5-1
Seals
5700 Handbook
5-2
Seals
5700 Handbook
Dynamic
O-Ring Sealing
5.1 Introduction
Dynamic O-ring sealing applications are considerably more
involved than static applications due to the implied motion
against the O-ring seal interface. Resistance to fluids must
be more carefully scrutinized than in conventional static
seal designs since a volumetric increase in the O-ring in
excess of approximately 20% may lead to friction and wear
difficulties, and only a minimum of shrinkage (at most 4%),
can be tolerated.
The metal or other surface over which the O-ring will move
also becomes critical. It must be hard and wear resistant. It
also must be sufficiently smooth so that it will not abrade
the rubber, and yet there must be small microfine pockets
on the moving surfaces to hold lubricant.
The greatest dynamic use of O-rings is in reciprocating
hydraulic rod and piston seals. These are discussed first, but
many of the ideas expressed are also applicable to other
dynamic applications. Considerations applying only to
other types of dynamic seals are discussed in greater detail
later in the section.
Babbitt Bearings
5-3
Seals
5700 Handbook
Enlarged View
of Felt Wiper
Gland with Felt
Installed in Groove
in Squeeze Condition
1/8 Ref.
Felt
Ring
3/18
Ref.
Prefered Design
Oiling Hole
Direct to Felt
Snap Ring
Washer
Scraper
Felt Wiper
O-ring Packing
Piston Rod
Bearing
Example:
(A) Select O-ring with actual ID slightly smaller than Rod OD, B.
(B) Divide the actual minimum squeeze given in Design Chart A6-5
for this O-ring size by two (the same squeeze is permissible in
most cases).
(C) Add this amount to both max. and min. gland depth, L, given in
Design Chart A6-5 to get proper gland depth for wiper, LW.
(D) Calculate balance of gland dimensions same as for piston rod
seal.
Seals
5700 Handbook
lm
Rmax and Rz
Z2
Z1
Z3
e
lm = 5 x le
Rz = 1 (Z1 + Z2 + Z3 + Z4 + Z5)
5
Rp = Depth of Roughness
Ra = Middle Roughness Value
Rp
Ra
Z4 = Rmax Z5
lm
50.000
31.500
1000
500
20.000
12.500
Upper limit
for Rz when
transposing
from Ra to Rz
8.000
250
5.000
3.150
Ra-Value in inch
63
a
b
32
16
8
4
Ra Value in m
125
Deviation
Ra
Upper limit
for Ra when
transposing
from Rz to Ra
2.000
1.250
0.800
0.500
Ra
0.315
0.200
0.125
0.080
2
1
d
a) Dimensional Deviations
b) Surface Undulations (Waves)
0.032
0.16 0.40
2.5
6.3
16
40
100
250
1.0
10
25
63
160
1.6
4.0
0.25
0.63
Rz Value in m
Seals
Rz
Rz
0.020
c) Roughness
d) Superimposition (with a or b)
0.050
5700 Handbook
1. Rt
2. Rt
3. Rt
4. Rt
5. Rt
6. Rt
7. Rt
8. Rt
Rp
Rp
Rt
Rp
Ra
tP (%)
0.5
0.5
50
50
50
0.5
0.5
50
50
75
0.5
0.5
50
50
75
0.75
0.28 12.5
25
37.5
Rp
Rp
Rp1
Rt1
Rp
0.25
0.28 62.5
75
87.5
a) Cold Formed Surface
Rp
14
35
0.215 0.188 65
86
96.5
50
57
Rp2
Rp
Rt2
Rp
b) Machined Surface
0.5
0.39
43
5-6
Seals
5700 Handbook
5.9 Squeeze
The best squeeze for a reciprocating O-ring seal must be a
compromise of all the factors involved. The design tables in
this chapter are generally satisfactory. The greater the
temperature range to be sealed, the greater the squeeze that
5-7
Seals
5700 Handbook
5.10 Stretch
When an O-ring must be stretched more than two or three
percent as installed in a piston groove, the reduction in the
squeeze diameter that results should be allowed for in
determining the gland depth so that the desired percent
squeeze will be applied to the reduced section. The percent
of stretch should therefore be checked whenever the catalog
gland dimensions are not used.
Large diameter O-rings may fit the piston so loosely that
they must be carefully stuffed into the groove as the piston
enters the cylinder to prevent damage. For these, the danger
of damage is reduced if the next smaller size O-ring is used.
Since this will likely cause a stretch close to five percent, it
will usually be necessary to adjust the gland depth as
mentioned above. See Figure 3-3 for the reduction in
squeeze diameter with stretch.
5.11 Friction
Friction, either break-out, running, or both, can become
troublesome in some applications. At any given time, there
are anomalies and difficulties in the prediction of developed friction. These are accentuated if one of the surfaces
involved is deformable as in O-ring piston or shaft seals. An
understanding of the principles may prove helpful in the
solution of specific problems.
Factor
To Decrease
Friction
Increase
Increase RMS
Increase
Decrease
Decrease RMS
Decrease
Decrease
Increase
Increase
Speed of Motion
Cross Section of O-Ring
Pressure
Increase
Decrease
Decrease
Omit Lubrication
Decrease
Decrease
Lubrication
Temperature
Groove Width
Use Lubrication
Increase
Increase
Increase
Decrease
Stretch O-ring
Decrease
Increase
Compress O-Ring
Lower Durometer
of O-ring
Coefficient of Friction#
Increase
Durometer
Pounds of Friction
Steel
8 Micro-In. RMS
Glass
Running Friction with
15 Feet per Minute
Stroke Speed
300 Hrs.
2-1/2 Sec. 40 Min.
Delay Between Cycles
2-1/2 Sec.
300 Hrs.
Seals
40 Min.
with Lubrication
5700 Handbook
Example:
Parker 2-214 rubbing against OD of O-ring at 103.5 Bar
(1500 PSI), 10% compression, 70 durometer:
FC
FH
F
=
=
=
Rod Groove
fc x L p
fh x Ap
FC + F H
FC = fc x Lr
FH = fh x Ar
F = F C + FH
=
=
=
0.7 x 3.93
48 x 0.44
F C + FH
=
=
=
2.75
20.90
23.65 pounds
Data for the coefficients (fc and fh) are given in Figures 5-9
and 5-10. Projected areas and lengths of rubbing surface are
given in Table 5-4.
1 Running Friction
Due to Pressure
Only
2 15 Micro-Inch Finish
Chrome Plated Surface
4 Speeds in Excess of
1 Ft. per Min.
2 15 Micro-Inch Finish
Chrome Plated Surface
4 Speeds in Excess of
1 Ft. per Min.
4
re
ho
S
90
ss
e
n
rd
Ha
80
70
10
15
20
70
50
30
10
25
2000
3000
Seals
1000
5700 Handbook
Rod Groove
Piston Groove
Rod Groove
O-Ring Size
Parker No. 2-
Ap
Sq. In.
Lp
In.
Ar
Sq. In.
Lr
In.
O-Ring Size
Parker No. 2-
Ap
Sq. In.
Lp
In.
Ar
Sq. In.
Lr
In.
006
007
008
009
010
.03
.04
.05
.05
.06
.79
.89
.98
1.08
1.18
.03
.04
.04
.05
.05
.39
.49
.58
.68
.78
140
141
142
143
144
.66
.68
.70
.72
.73
7.66
7.86
8.05
8.25
8.45
.66
.68
.70
.71
.73
7.07
7.26
7.46
7.65
7.85
011
012
013
014
015
.07
.08
.09
.10
.11
1.38
1.57
1.77
1.97
2.16
.07
.08
.09
.10
.11
.98
1.17
1.37
1.57
1.76
145
146
147
148
149
.75
.77
.79
.80
.82
8.64
8.84
9.04
9.23
9.43
.75
.77
.78
.80
.82
8.05
8.24
8.44
8.64
8.83
016
017
018
019
020
.12
.14
.15
.16
.17
2.36
2.56
2.75
2.95
3.14
.12
.13
.14
.16
.17
1.96
2.16
2.35
2.55
2.75
210
211
212
213
214
.34
.36
.39
.41
.44
3.15
3.34
3.54
3.74
3.93
.34
.36
.38
.41
.43
2.35
2.54
2.74
2.94
3.14
021
022
023
024
025
.18
.19
.20
.21
.22
3.34
3.54
3.73
3.93
4.13
.18
.19
.20
.21
.22
2.94
3.14
3.33
3.53
3.73
215
216
217
218
219
.46
.48
.51
.53
.56
4.13
4.33
4.52
4.72
4.91
.46
.48
.50
.53
.55
3.33
3.53
3.72
3.92
4.12
026
027
028
.24
.25
.26
4.32
4.52
4.72
.23
.24
.26
3.92
4.12
4.32
220
221
222
.58
.61
.63
5.11
5.31
5.50
.58
.60
.63
4.31
4.51
4.71
110
111
112
113
114
.13
.15
.17
.19
.20
1.77
1.97
2.16
2.36
2.56
.13
.15
.17
.18
.20
1.17
1.37
1.57
1.76
1.96
325
326
327
328
329
1.00
1.07
1.14
1.22
1.29
5.90
6.29
6.68
7.07
7.47
.99
1.07
1.14
1.21
1.29
4.71
5.10
5.49
5.88
6.28
115
116
117
118
119
.22
.24
.26
.28
.29
2.75
2.95
3.14
3.34
3.54
.22
.24
.25
.27
.29
2.16
2.35
2.55
2.75
2.94
330
331
332
333
334
1.36
1.44
1.51
1.58
1.66
7.86
8.25
8.65
9.04
9.43
1.36
1.43
1.51
1.58
1.65
6.67
7.06
7.45
7.85
8.24
120
121
122
123
124
.31
.33
.35
.36
.38
3.73
3.93
4.13
4.32
4.52
.31
.32
.34
.36
.38
3.14
3.33
3.53
3.73
3.92
335
336
337
338
339
1.73
1.81
1.88
1.95
2.03
9.82
10.22
10.61
11.00
11.40
1.73
1.80
1.87
1.95
2.02
8.63
9.03
9.42
9.81
10.20
125
126
127
128
129
.40
.42
.43
.45
.47
4.72
4.91
5.11
5.30
5.50
.40
.41
.43
.45
.47
4.12
4.32
4.51
4.71
4.90
340
341
342
343
344
2.10
2.17
2.25
2.32
2.39
11.79
12.18
12.58
12.97
13.36
2.10
2.17
2.24
2.31
2.39
10.59
10.99
11.38
11.77
12.16
130
131
132
133
134
.49
.50
.52
.54
.56
5.70
5.89
6.09
6.29
6.48
.48
.50
.52
.54
.55
5.10
5.30
5.49
5.69
5.89
345
346
347
348
349
2.47
2.54
2.62
2.69
2.76
13.75
14.15
14.54
14.93
15.32
2.46
2.54
2.61
2.68
2.76
12.56
12.95
13.34
13.73
14.13
135
136
137
138
139
.58
.59
.61
.63
.65
6.68
6.88
7.07
7.27
7.46
.57
.59
.61
.63
.64
6.08
6.28
6.47
6.67
6.87
425
426
427
428
429
3.59
3.69
3.78
3.87
3.97
15.72
16.11
16.51
16.90
17.29
3.57
3.66
3.76
3.85
3.95
14.13
14.52
14.91
15.31
15.70
Table 5-4: Projected Areas and Lengths of Rubbing Surface for O-rings
5-10
Seals
5700 Handbook
Piston Groove
Rod Groove
O-Ring Size
Parker No. 2-
O-Ring Size
Parker No. 2-
Ap
Sq. In.
Lp
In.
Ar
Sq. In.
Lr
In.
430
431
432
433
434
4.06
4.16
4.25
4.35
4.44
17.68
18.08
18.47
18.86
19.25
4.04
4.14
4.23
4.32
4.42
16.09
16.48
16.88
17.27
17.66
445
446
447
448
449
435
436
437
438
439
4.53
4.63
4.72
4.91
5.10
19.65
20.04
20.43
21.22
22.00
4.51
4.61
4.70
4.89
5.08
18.05
18.45
18.84
19.63
20.41
440
441
442
443
444
5.29
5.48
5.67
5.85
6.04
22.79
23.57
24.36
25.15
25.93
5.27
5.46
5.64
5.83
6.02
21.20
21.98
22.77
23.55
24.34
Ap
Sq. In.
Rod Groove
Lp
In.
Ar
Sq. In.
Lr
In.
6.23
6.61
6.98
7.36
7.74
26.72
28.29
29.86
31.43
33.00
6.21
6.59
6.96
7.34
7.72
25.12
26.69
28.26
29.84
31.41
450
451
452
453
454
8.12
8.49
8.87
9.25
9.62
34.57
36.14
37.71
39.28
40.85
8.09
8.47
8.85
9.22
9.60
32.98
34.55
36.12
37.69
39.26
455
456
457
458
459
460
10.00
10.38
10.75
11.13
11.51
11.89
42.42
43.99
45.57
47.14
48.71
50.28
9.98
10.36
10.73
11.11
11.49
11.86
40.83
42.40
43.97
45.54
47.11
48.69
Table 5-4: Projected Areas and Lengths of Rubbing Surface for O-rings, Continued
5.14.1 Friction
Bmin = 0.559
B-1min = 0.571
Projected Area:
Ap = (/4) [(0.751 )- (0.571)] = 0.187 sq. in.
5-11
Seals
5700 Handbook
When the medium is mineral oil it would seem that sufficient lubrication is assured. However, the seal geometry
once again plays a role when, for example, a wiper seal
scrapes a shaft dry. Leakage at a wiper seal will not occur
until the seal wears. On the other hand lubrication can cause
leakage amounting to the thick lubricating film with every
stroke.
The optimum condition is a relatively thin lubricating film
with sufficient adhesive properties.
The dynamic piston actually causes less friction with increasing velocity. In absolute terms there are very large
discrepancies according to the thickness of the lubricating
film. The reduction of friction with increasing velocity
stems from the hydrodynamic properties of the lubricating
fluid. This is also true for harder compounds. At low
pressures the friction varies to the piston speed. At high
pressures friction is seen to be more or less constant.
Friction is directly influenced by the seal diameter because
the wear-area is greater. The greater the metal surface
roughness, the more the contact surface consists of metallic
islands and therefore again mixed friction occurs.
As in many other areas break-out friction of elastomers is
significantly higher than running friction. Apart from compound type and seal geometry, tendency to adhesion, deformation, the down-time and the surface finish play a role in
increasing break-out friction. The longer the down-time,
the more lubrication is squeezed from between the seal and
the running surface resulting in a non-lubricated vacuum.
In this condition the level of starting friction approaches
that for dry friction and is up to 10 times that found in
running friction (Figures 5-12 and 5-11).
For the same conditions, friction at high temperature (= low
viscosity) is high because the lubricating film is often
interrupted.
Level of Starting Friction
Dependant Upon Time and Compound
Coefficient of Friction
Stribeck diagram
Coefficient of Friction
Break-out friction
Mixed friction
Hydro-dynamic friction
1.2
a)
0.8
b)
0.4
10 sec. 1 min.
1 hr.
Downtime
V min.
Velocity V
Seals
5700 Handbook
Radial oscillation of the piston will occur when the lubricating film breaks down. Conversely oils with strong film
building properties do not break down under the same
working conditions using the same seals.
1.5
1.0
H
Coefficient of Friction
0.5
Ve
loc
ity
V
200
(m
/m
m)
100
e
Pr
ss
ur
(b
ar
V min.
Seals
Velocity (V)
5700 Handbook
5.14.3 Wear
Friction causes wear. However, friction can be anticipated
and taken into consideration in the design stage. The wear
rate however is difficult to predict but directly governs the
lifetime of an O-ring and the frequency of maintenance.
Todays high precision machinery tends in most cases to
eliminate hydrodynamic lubrication because of the increased
wipe-off effect. This means the seal always functions in
semidry condition and for this reason wear resistance
depends on:
properties of the compound;
lubricating properties of the medium;
running surface roughness;
working conditions.
Wear in fluid solutions can be divided into four groups:
Scuff wear develops with metal-to-metal contact in the
semidry condition where both materials tend to form
mixed crystals. High Performance Lubricating (HPL)
oils help to prevent this contact because of their additives. These additives have no influence in rubber/steel
or rubber/metal combinations.
lin
e
Bo
rd
er
Seal O-ring
Single Stroke (Not Pressurized)
4
2
3
Original Film Thickness (0)
v = 0.2 m/s.
v = 1.0 m/s.
5.14.4 Interdependence of
Friction Wear and an Effective Seal
In order to obtain a problem-free seal it is necessary to have
stability with regard to the clearance gap to avoid possible
extrusion. However, stability is difficult to achieve because
the relevant parameters often work conversely.
The first consideration is the lubricating film in the clearance gap. To estimate friction, lifetime and leakage it is
necessary to know the width of the gap and how it varies
under working conditions. To keep friction as low as
possible the lubricating film should be fairly substantial.
This, however, can result in leakage because the thick
film is wiped off the rod surface during the return stroke. In
the other extreme a lack of lubricating film causes problems
due to high friction. The effectiveness of a seal and friction
therefore are inversely proportional.
Hardness, together with the width and length of a clearance
gap is very important. The hardness determines the elasticity of the seal and assures that the seal gives way to the
lubricating film under pressure. The instantaneous viscosity of the fluid also plays an important role in resisting the
wiping effect of the seal.
v = 0.6 m/s.
v = 1.4 m/s.
5-14
Seals
5700 Handbook
Shaft
Fluid
Pressure
Large
Area
O-Ring
Delta-Ring
Square-Ring
X-Ring
All are subject to torsional or spiral failure.
5-15
Seals
Small Area
5700 Handbook
5.15.4 Squeeze
The aerospace industry has generally found that more than
0.043 mm (0.017 in.) of squeeze on the side of a 5.3 mm
(0.210") cross section (W) O-ring will make some long
stroke applications prone to spiral failure. It can be easily
seen that more rolling force is created on the cross section
with an increase in squeeze. Other factors are normally
involved when failure occurs with the standard squeezes
recommended for reciprocating seals.
5-16
Seals
5700 Handbook
4.
5.
3.
4.
2.
5-17
Seals
5700 Handbook
5.22 High-Pressure
5.20 Temperature
Nitrile rubber is generally the first compound considered
for a seal. It should be remembered, however, that it is less
resistant to dry heat than it is to hot oils or other liquids.
Nitrile compounds are used for pneumatic applications
more than any other polymer, but in this kind of use,
temperatures are usually low. In pneumatic applications
above 104C (220F) for extended periods of time, consider ethylene propylene, fluorocarbon, or even silicone or
fluorosilicone. The choice depends on temperature extremes, internal lubricant, severity of service, and overall
cost.
Snap
Ring
5.23 Lubrication
Most conventional pneumatic applications that fail prematurely do so because of inadequate lubrication. Rubber has
an inherently high coefficient of friction with all metals and
most non-metallic surfaces. Disregarding the necessity for
lubrication will result in high friction, excessive abrasion or
rapid wear of the rubber O-ring and heat build-up. For
pneumatic seal applications it is especially important that
adequate lubrication be provided. Of course, a lubricant
must be selected that will not cause deterioration of the
O-ring.
Seals
5700 Handbook
Seals
5700 Handbook
Speed
(fpm*)
Maximum Recommended
W Dimension
0 to 200
200 to 400
200 to 600
200 to 1500
5-20
Seals
5700 Handbook
2.
Problem: To design a rotary seal gland for a 76.2 mm (3") (desired) shaft running at 1750 RPM with oil pressure
at 6.9 Bar (100 PSI).
Procedural Steps:
Example:
(F)
A-1 min.
A-1 max.
A-1
= 2.991 + 2(0.065)
= 3.121
= 2.990 + (0.067)
= 3.124
= 3.121 (TOL: + .003, - .000)
D min.
D max.
D
Seals
5700 Handbook
O-Ring
O-Ring
Pressure
Pressure
O-Ring
Pressure
5-22
Seals
5700 Handbook
Select Closest
Dimension
In Column
Read
Horizontally
In Column
G
C
F
G
A
Rod or Gland
Sleeve O.D.
F
G
J
H
Rod Bore or
Female Gland
Housing Bore I.D.
G
J
B
To Determine
Dimension For
Groove Width*
Piston or Cylinder O.D.
Groove O.D.
Groove Width*
Cylinder Bore or Male Gland
Cylinder Bore I.D.
Groove O.D.
Groove Width*
Groove I.D.
Rod Bore or Female Gland
Housing Bore I.D.
Groove Width*
Groove I.D.
Rod or Gland Sleeve O.D.
After selecting gland dimension, read horizontally to determine proper O-ring size number per
AS568A.
There are a number of various O-ring gland design specifications in use throughout industry. These
include Aerospace Recommended Practice (ARP) 1232, 1233 and 1234. There also is the
International Standards Organization (better known as ISO) Specification 3601/2. Each of these
and other less accepted documents have slight dimensional variations from those found in this
Handbook.
5-23
Seals
5700 Handbook
Gland Width G
No Backup Ring
Gland Width G
One Backup Ring
Gland Width G
Two Backup Rings
Min.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
.037
.047
.057
.067
.067
.100
.135
.205
.269
.043
.053
.063
.073
.073
.106
.143
.215
.281
.070
.077
.088
.098
.094
.141
.188
.281
.375
.075
.082
.093
.103
.099
.151
.198
.291
.385
.154
.150
.183
.235
.334
.475
.164
.160
.193
.245
.344
.485
.210
.207
.245
.304
.424
.579
.220
.217
.255
.314
.434
.589
Design Chart 5-1A: Gland Design, O-Ring and Other Elastomeric Seals (SAE AS4716)
Diametral Clearance
E Max.
Min.
Max.
Exterior
Interior
.037
.047
.057
.067
.067
.100
.100
.100
.100
.100
.135
.135
.135
.135
.135
.135
.205
.205
.205
.205
.269
.269
.269
.269
.043
.053
.063
.073
.073
.106
.106
.106
.106
.106
.143
.143
.143
.143
.143
.143
.215
.215
.215
.215
.281
.281
.281
.281
.004
.004
.004
.004
.005
.005
.005
.006
.006
.007
.005
.006
.006
.007
.008
.008
.006
.006
.007
.008
.009
.009
.010
.011
.004
.004
.004
.004
.005
.005
.006
.006
.007
.007
.005
.006
.007
.007
.007
.008
.006
.007
.007
.007
.009
.010
.010
.010
5-24
Seals
5700 Handbook
1/2 E
16
R
Y
1/2 E
+.005
Break Edge .005 .000
1/2 E
Gland
L Depth
G
Groove
Depth (Ref.)
F Dia.
C Dia.
A Dia.
Pressure
Pressure
Pressure
Gland Detail
32
63
32
63
No
Back-up
Ring
One
Back-up
Ring
G
Two
Back-up
Rings
Break Edge
Pressure (PSIG)
X (Degrees)
Pressure (PSIG)
3000
4000 to 6000
>6000 to 8000
0.0 +5.0/-0.0
0.0 +2.0/-0.0
0.0 0.5
4000
0.005 +0.005/-0.000
> 4000
0.002 +0.008/-0.000
Gland
and
AS568
Dash
No.
Piston
or
Cylinder
OD
C
Cylinder
Bore
ID
A
Gland
OD
F
Rod or
Gland
Sleeve
OD
B
Rod
Bore
ID
H
Gland
ID
J
Actual
Minimum Squeeze
Actual
Maximum Squeeze
Piston
Rod
Piston
Rod
001
0.093
0.092
0.095
0.096
0.033
0.032
0.033
0.032
0.035
0.036
0.095
0.096
0.0000
0.0000
0.0145
0.0145
002
0.126
0.125
0.128
0.129
0.048
0.047
0.048
0.047
0.050
0.051
0.128
0.129
0.0000
0.0000
0.0139
0.0139
003
0.157
0.156
0.159
0.160
0.063
0.062
0.063
0.062
0.065
0.066
0.159
0.160
0.0000
0.0000
0.0154
0.0154
004
0.188
0.187
0.190
0.191
0.076
0.075
0.076
0.075
0.078
0.079
0.190
0.191
0.0003
0.0003
0.0176
0.0176
005
0.219
0.218
0.221
0.222
0.108
0.107
0.108
0.107
0.110
0.111
0.221
0.222
0.0020
0.0020
0.0178
0.0178
006
0.233
0.232
0.235
0.236
0.123
0.122
0.123
0.122
0.125
0.126
0.235
0.236
0.0023
0.0023
0.0177
0.0177
007
0.264
0.263
0.266
0.267
0.154
0.153
0.154
0.153
0.156
0.157
0.266
0.267
0.0032
0.0032
0.0179
0.0179
008
0.295
0.294
0.297
0.298
0.189
0.188
0.185
0.184
0.187
0.188
0.294
0.295
0.0050
0.0053
0.0193
0.0196
009
0.327
0.326
0.329
0.330
0.220
0.219
0.217
0.216
0.219
0.220
0.327
0.328
0.0052
0.0052
0.0192
0.0193
010
0.358
0.357
0.360
0.361
0.250
0.249
0.248
0.247
0.250
0.251
0.359
0.360
0.0052
0.0050
0.0190
0.0189
011
0.420
0.419
0.422
0.423
0.312
0.311
0.310
0.309
0.312
0.313
0.421
0.422
0.0057
0.0054
0.0193
0.0191
012
0.483
0.482
0.485
0.486
0.375
0.374
0.373
0.372
0.375
0.376
0.484
0.485
0.0060
0.0057
0.0194
0.0192
013
0.548
0.547
0.550
0.552
0.441
0.439
0.435
0.433
0.437
0.438
0.545
0.547
0.0050
0.0050
0.0196
0.0198
Design Table 5-1: Gland Design, O-Ring and Other Elastomeric Seals (SAE AS4716)
5-25
Seals
5700 Handbook
Piston
or
Cylinder
OD
C
Cylinder
Bore
ID
A
Gland
OD
F
Rod or
Gland
Sleeve
OD
B
Rod
Bore
ID
H
Gland
ID
J
Actual
Minimum Squeeze
Actual
Maximum Squeeze
Piston
Rod
Piston
Rod
014
0.611
0.610
0.613
0.615
0.504
0.502
0.498
0.496
0.500
0.501
0.608
0.610
0.0052
0.0051
0.0197
0.0199
015
0.673
0.672
0.675
0.677
0.566
0.564
0.560
0.558
0.562
0.563
0.670
0.672
0.0052
0.0051
0.0200
0.0202
016
0.736
0.735
0.738
0.740
0.629
0.627
0.623
0.621
0.625
0.626
0.733
0.735
0.0052
0.0051
0.0203
0.0205
017
0.798
0.797
0.800
0.802
0.691
0.689
0.685
0.683
0.687
0.688
0.795
0.797
0.0054
0.0052
0.0204
0.0205
018
0.861
0.860
0.863
0.865
0.753
0.751
0.748
0.746
0.750
0.751
0.858
0.860
0.0050
0.0053
0.0200
0.0205
019
0.923
0.922
0.925
0.927
0.815
0.813
0.810
0.808
0.812
0.813
0.920
0.922
0.0051
0.0053
0.0200
0.0205
020
0.989
0.988
0.991
0.993
0.881
0.879
0.873
0.871
0.875
0.876
0.983
0.985
0.0050
0.0054
0.0198
0.0205
021
1.051
1.050
1.053
1.055
0.943
0.941
0.935
0.933
0.937
0.938
1.045
1.047
0.0051
0.0055
0.0199
0.0205
022
1.114
1.113
1.116
1.118
1.006
1.004
0.998
0.996
1.000
1.001
1.108
1.110
0.0051
0.0055
0.0200
0.0205
023
1.176
1.175
1.178
1.180
1.068
1.066
1.060
1.058
1.062
1.063
1.170
1.172
0.0052
0.0055
0.0200
0.0205
024
1.239
1.238
1.241
1.243
1.131
1.129
1.123
1.121
1.125
1.126
1.233
1.235
0.0052
0.0056
0.0200
0.0205
025
1.301
1.300
1.303
1.305
1.193
1.191
1.185
1.183
1.187
1.188
1.295
1.297
0.0052
0.0056
0.0201
0.0205
026
1.384
1.363
1.366
1.368
1.256
1.254
1.248
1.246
1.250
1.251
1.358
1.360
0.0053
0.0056
0.0201
0.0205
027
1.426
1.425
1.428
1.430
1.318
1.316
1.310
1.308
1.312
1.313
1.420
1.422
0.0053
0.0056
0.0202
0.0205
028
1.489
1.488
1.491
1.493
1.381
1.379
1.373
1.371
1.375
1.376
1.483
1.485
0.0053
0.0056
0.0203
0.0205
110
0.548
0.547
0.550
0.552
0.379
0.377
0.373
0.371
0.375
0.376
0.546
0.548
0.0053
0.0052
0.0204
0.0204
111
0.611
0.610
0.613
0.615
0.441
0.439
0.435
0.433
0.437
0.438
0.609
0.611
0.0052
0.0050
0.0202
0.0201
112
0.673
0.672
0.675
0.677
0.502
0.500
0.498
0.496
0.500
0.501
0.672
0.674
0.0053
0.0053
0.0201
0.0203
113
0.736
0.735
0.738
0.740
0.565
0.563
0.560
0.558
0.562
0.563
0.734
0.736
0.0052
0.0052
0.0204
0.0207
114
0.798
0.797
0.800
0.802
0.627
0.625
0.623
0.621
0.625
0.626
0.797
0.799
0.0053
0.0052
0.0210
0.0211
115
0.861
0.860
0.863
0.865
0.689
0.687
0.685
0.683
0.687
0.688
0.859
0.861
0.0050
0.0054
0.0206
0.0212
116
0.923
0.922
0.925
0.927
0.751
0.749
0.748
0.746
0.750
0.751
0.923
0.925
0.0053
0.0050
0.0208
0.0207
Design Table 5-1: Gland Design, O-Ring and Other Elastomeric Seals (SAE AS4716)
5-26
Seals
5700 Handbook
Piston
or
Cylinder
OD
C
Cylinder
Bore
ID
A
Gland
OD
F
Rod or
Gland
Sleeve
OD
B
Rod
Bore
ID
H
Gland
ID
J
Actual
Minimum Squeeze
Actual
Maximum Squeeze
Piston
Rod
Piston
Rod
117
0.989
0.988
0.991
0.993
0.817
0.815
0.810
0.808
0.812
0.813
0.985
0.987
0.0050
0.0050
0.0205
0.0209
118
1.051
1.050
1.053
1.055
0.879
0.877
0.873
0.871
0.875
0.876
1.048
1.050
0.0052
0.0051
0.0207
0.0209
119
1.114
1.113
1.116
1.118
0.942
0.940
0.935
0.933
0.937
0.938
1.110
1.112
0.0053
0.0052
0.0206
0.0209
120
1.176
1.175
1.178
1.180
1.003
1.001
0.998
0.996
1.000
1.001
1.173
1.175
0.0050
0.0053
0.0204
0.0209
121
1.239
1.238
1.241
1.243
1.066
1.064
1.060
1.058
1.062
1.063
1.235
1.237
0.0050
0.0054
0.0203
0.0209
122
1.301
1.300
1.303
1.305
1.128
1.126
1.123
1.121
1.125
1.126
1.298
1.300
0.0052
0.0055
0.0204
0.0209
123
1.364
1.363
1.366
1.368
1.191
1.189
1.185
1.183
1.187
1.188
1.360
1.362
0.0051
0.0054
0.0205
0.0210
124
1.426
1.425
1.428
1.430
1.253
1.251
1.248
1.246
1.250
1.251
1.423
1.425
0.0052
0.0055
0.0206
0.0210
125
1.489
1.488
1.491
1.493
1.316
1.314
1.310
1.308
1.312
1.313
1.485
1.487
0.0052
0.0055
0.0206
0.0210
126
1.551
1.550
1.553
1.555
1.378
1.376
1.373
1.371
1.375
1.376
1.548
1.550
0.0053
0.0056
0.0207
0.0210
127
1.614
1.613
1.616
1.618
1.441
1.439
1.435
1.433
1.437
1.439
1.610
1.612
0.0053
0.0051
0.0206
0.0215
128
1.676
1.675
1.678
1.680
1.503
1.501
1.498
1.496
1.500
1.502
1.673
1.675
0.0054
0.0052
0.0207
0.0215
129
1.739
1.738
1.741
1.743
1.566
1.564
1.560
1.558
1.562
1.564
1.735
1.737
0.0053
0.0051
0.0208
0.0215
130
1.802
1.801
1.805
1.807
1.631
1.629
1.623
1.621
1.625
1.627
1.798
1.800
0.0053
0.0051
0.0217
0.0215
131
1.864
1.863
1.867
1.869
1.693
1.691
1.685
1.683
1.687
1.689
1.860
1.862
0.0053
0.0052
0.0217
0.0215
132
1.927
1.926
1.930
1.932
1.756
1.754
1.748
1.746
1.750
1.752
1.923
1.925
0.0054
0.0052
0.0217
0.0215
133
1.989
1.988
1.992
1.994
1.818
1.816
1.810
1.808
1.813
1.815
1.984
1.986
0.0054
0.0052
0.0218
0.0225
134
2.052
2.051
2.055
2.057
1.881
1.879
1.873
1.871
1.876
1.878
2.047
2.049
0.0055
0.0053
0.0218
0.0225
135
2.115
2.114
2.118
2.120
1.944
1.942
1.936
1.934
1.939
1.941
2.110
2.112
0.0054
0.0052
0.0219
0.0225
136
2.177
2.176
2.180
2.182
2.006
2.004
1.998
1.996
2.001
2.003
2.172
2.174
0.0055
0.0053
0.0219
0.0225
137
2.240
2.239
2.243
2.245
2.069
2.067
2.061
2.059
2.064
2.066
2.235
2.237
0.0055
0.0053
0.0219
0.0225
138
2.302
2.301
2.305
2.307
2.131
2.129
2.123
2.121
2.126
2.128
2.297
2.299
0.0055
0.0053
0.0219
0.0225
Design Table 5-1: Gland Design, O-Ring and Other Elastomeric Seals (SAE AS4716)
5-27
Seals
5700 Handbook
Piston
or
Cylinder
OD
C
Cylinder
Bore
ID
A
Gland
OD
F
Rod or
Gland
Sleeve
OD
B
Rod
Bore
ID
H
Gland
ID
J
Actual
Minimum Squeeze
Actual
Maximum Squeeze
Piston
Rod
Piston
Rod
139
2.365
2.364
2.368
2.370
2.194
2.192
2.186
2.184
2.189
2.191
2.360
2.362
0.0056
0.0054
0.0219
0.0225
140
2.427
2.426
2.430
2.432
2.256
2.254
2.248
2.246
2.251
2.253
2.422
2.424
0.0056
0.0054
0.0219
0.0225
141
2.490
2.488
2.493
2.495
2.319
2.317
2.311
2.309
2.314
2.316
2.485
2.487
0.0050
0.0053
0.0225
0.0225
142
2.552
2.550
2.555
2.557
2.381
2.379
2.373
2.371
2.376
2.378
2.547
2.549
0.0051
0.0053
0.0225
0.0225
143
2.615
2.613
2.618
2.620
2.444
2.442
2.436
2.434
2.439
2.441
2.610
2.612
0.0051
0.0054
0.0225
0.0225
144
2.677
2.675
2.680
2.682
2.506
2.504
2.498
2.496
2.501
2.503
2.672
2.674
0.0051
0.0054
0.0225
0.0225
145
2.740
2.738
2.743
2.745
2.569
2.567
2.561
2.559
2.564
2.566
2.735
2.737
0.0052
0.0054
0.0225
0.0225
146
2.802
2.800
2.805
2.807
2.631
2.629
2.623
2.621
2.626
2.628
2.797
2.799
0.0052
0.0054
0.0225
0.0225
147
2.865
2.863
2.868
2.870
2.694
2.692
2.686
2.684
2.689
2.691
2.860
2.862
0.0051
0.0054
0.0225
0.0225
148
2.927
2.925
2.930
2.932
2.756
2.754
2.748
2.746
2.751
2.753
2.922
2.924
0.0052
0.0054
0.0225
0.0225
149
2.990
2.988
2.993
2.995
2.819
2.817
2.811
2.809
2.814
2.816
2.985
2.987
0.0052
0.0054
0.0225
0.0225
210
0.989
0.988
0.991
0.993
0.750
0.748
0.748
0.746
0.750
0.751
0.989
0.991
0.0052
0.0054
0.0244
0.0247
211
1.051
1.050
1.053
1.055
0.812
0.810
0.810
0.808
0.812
0.813
1.051
1.053
0.0054
0.0055
0.0244
0.0248
212
1.114
1.113
1.116
1.118
0.874
0.872
0.873
0.871
0.875
0.876
1.115
1.117
0.0051
0.0052
0.0242
0.0243
213
1.176
1.175
1.178
1.180
0.936
0.934
0.935
0.933
0.937
0.938
1.177
1.179
0.0052
0.0053
0.0242
0.0244
214
1.239
1.238
1.241
1.243
0.999
0.997
0.998
0.996
1.000
1.001
1.240
1.242
0.0054
0.0054
0.0243
0.0244
215
1.301
1.300
1.303
1.305
1.064
1.062
1.060
1.058
1.062
1.063
1.302
1.304
0.0067
0.0056
0.0254
0.0244
216
1.364
1.363
1.366
1.368
1.124
1.122
1.123
1.121
1.125
1.126
1.365
1.367
0.0054
0.0055
0.0246
0.0247
217
1.426
1.425
1.428
1.430
1.186
1.184
1.185
1.183
1.187
1.188
1.427
1.429
0.0055
0.0056
0.0246
0.0247
218
1.489
1.488
1.491
1.493
1.249
1.247
1.248
1.246
1.250
1.251
1.490
1.492
0.0056
0.0057
0.0246
0.0247
219
1.551
1.550
1.553
1.555
1.311
1.309
1.310
1.308
1.312
1.313
1.552
1.554
0.0057
0.0058
0.0246
0.0248
220
1.614
1.613
1.616
1.618
1.374
1.372
1.373
1.371
1.375
1.376
1.615
1.617
0.0058
0.0059
0.0247
0.0248
Design Table 5-1: Gland Design, O-Ring and Other Elastomeric Seals (SAE AS4716)
5-28
Seals
5700 Handbook
Piston
or
Cylinder
OD
C
Cylinder
Bore
ID
A
Gland
OD
F
Rod or
Gland
Sleeve
OD
B
Rod
Bore
ID
H
Gland
ID
J
Actual
Minimum Squeeze
Actual
Maximum Squeeze
Piston
Rod
Piston
Rod
221
1.676
1.675
1.678
1.680
1.436
1.434
1.435
1.433
1.437
1.438
1.677
1.679
0.0059
0.0059
0.0247
0.0248
222
1.739
1.738
1.741
1.743
1.499
1.497
1.498
1.496
1.500
1.501
1.740
1.742
0.0057
0.0058
0.0250
0.0250
223
1.864
1.863
1.867
1.869
1.625
1.623
1.623
1.621
1.625
1.627
1.865
1.867
0.0053
0.0054
0.0254
0.0255
224
1.989
1.988
1.992
1.994
1.750
1.748
1.748
1.746
1.750
1.752
1.990
1.992
0.0055
0.0056
0.0254
0.0255
225
2.115
2.114
2.118
2.120
1.876
1.874
1.873
1.871
1.876
1.878
2.115
2.117
0.0054
0.0050
0.0255
0.0260
226
2.240
2.239
2.243
2.245
2.001
1.999
1.998
1.996
2.001
2.003
2.240
2.242
0.0055
0.0051
0.0255
0.0260
227
2.365
2.364
2.368
2.370
2.126
2.124
2.123
2.121
2.126
2.128
2.365
2.367
0.0056
0.0052
0.0255
0.0260
228
2.490
2.488
2.493
2.495
2.251
2.249
2.248
2.246
2.251
2.253
2.490
2.492
0.0051
0.0052
0.0260
0.0260
229
2.615
2.613
2.618
2.620
2.376
2.374
2.373
2.371
2.376
2.378
2.615
2.617
0.0051
0.0053
0.0260
0.2060
230
2.740
2.738
2.743
2.745
2.501
2.499
2.498
2.496
2.501
2.503
2.740
2.742
0.0052
0.0054
0.0260
0.0260
231
2.865
2.863
2.868
2.870
2.626
2.624
2.623
2.621
2.626
2.628
2.865
2.867
0.0053
0.0054
0.0260
0.0260
232
2.990
2.988
2.993
2.995
2.751
2.749
2.748
2.746
2.751
2.753
2.990
2.992
0.0052
0.0053
0.0260
0.0260
233
3.115
3.113
3.118
3.120
2.876
2.874
2.873
2.871
2.876
2.878
3.115
3.117
0.0053
0.0054
0.0260
0.0260
234
3.240
3.238
3.243
3.245
3.001
2.999
2.997
2.995
3.000
3.002
3.239
3.241
0.0053
0.0055
0.0260
0.0260
235
3.365
3.363
3.368
3.370
3.126
3.124
3.122
3.120
3.125
3.127
3.364
3.366
0.0054
0.0055
0.0260
0.0260
236
3.490
3.488
3.493
3.495
3.251
3.249
3.247
3.245
3.250
2.252
3.489
3.491
0.0054
0.0056
0.0260
0.0260
237
3.615
3.613
3.618
3.620
3.376
3.374
3.372
3.370
3.375
3.377
3.614
3.616
0.0055
0.0056
0.0260
0.0260
238
3.740
3.738
3.743
3.745
3.501
3.499
3.497
3.495
3.500
3.502
3.739
3.741
0.0055
0.0057
0.0260
0.0260
239
3.865
3.863
3.868
3.870
3.626
3.624
3.622
3.620
3.625
3.627
3.864
3.866
0.0055
0.0056
0.0260
0.0260
240
3.990
3.988
3.993
3.995
3.751
2.749
3.747
3.745
3.750
3.752
3.989
3.991
0.0055
0.0056
0.0260
0.0260
241
4.115
4.113
4.118
4.120
3.876
3.874
3.872
3.870
3.875
3.877
4.114
4.116
0.0056
0.0057
0.0260
0.0260
242
4.240
4.238
4.243
4.245
4.001
3.999
3.997
3.995
4.000
4.002
4.239
4.241
0.0056
0.0057
0.0260
0.0260
Design Table 5-1: Gland Design, O-Ring and Other Elastomeric Seals (SAE AS4716)
5-29
Seals
5700 Handbook
Piston
or
Cylinder
OD
C
Cylinder
Bore
ID
A
Gland
OD
F
Rod or
Gland
Sleeve
OD
B
Rod
Bore
ID
H
Gland
ID
J
Actual
Minimum Squeeze
Actual
Maximum Squeeze
Piston
Rod
Piston
Rod
243
4.365
4.363
4.368
4.370
4.126
4.124
4.122
1.120
4.125
4.127
4.364
4.366
0.0056
0.0057
0.0260
0.0260
244
4.489
4.487
4.493
4.495
4.251
4.249
4.247
4.245
4.250
4.252
4.489
4.491
0.0051
0.0057
0.0265
0.0260
245
4.614
4.612
4.618
4.620
4.376
4.374
4.372
4.370
4.375
4.377
4.614
4.616
0.0051
0.0058
0.0265
0.0260
246
4.739
4.737
4.743
4.745
4.501
4.499
4.497
4.495
4.501
4.503
4.739
4.741
0.0052
0.0053
0.0265
0.0265
247
4.864
4.862
4.868
4.870
4.626
4.624
4.622
4.620
4.626
4.628
4.864
4.866
0.0052
0.0053
0.0265
0.0265
325
1.864
1.863
1.867
1.869
1.495
1.493
1.498
1.496
1.500
1.502
1.870
1.872
0.0081
0.0079
0.0322
0.0318
326
1.989
1.988
1.992
1.994
1.620
1.618
1.623
1.621
1.625
1.627
1.995
1.997
0.0083
0.0081
0.0323
0.0319
327
2.115
2.114
2.118
2.120
1.746
1.744
1.748
1.746
1.750
1.752
2.120
2.122
0.0085
0.0083
0.0322
0.0320
328
2.240
2.239
2.243
2.245
1.871
1.869
1.873
1.871
1.876
1.878
2.245
2.247
0.0087
0.0080
0.0323
0.0325
329
2.365
2.364
2.368
2.370
1.996
1.994
1.998
1.996
2.001
2.003
2.370
2.372
0.0086
0.0080
0.0326
0.0329
330
2.490
2.488
2.493
2.495
2.121
2.119
2.123
2.121
2.126
2.128
2.495
2.497
0.0083
0.0081
0.0332
0.0330
331
2.615
2.613
2.618
2.620
2.246
2.244
2.248
2.246
2.251
2.253
2.620
2.622
0.0084
0.0083
0.0332
0.0330
332
2.740
2.738
2.743
2.745
2.371
2.369
2.373
2.371
2.376
2.378
2.745
2.747
0.0085
0.0084
0.0332
0.0330
333
2.865
2.863
2.868
2.870
2.496
2.494
2.498
2.496
2.501
2.503
2.870
2.872
0.0085
0.0084
0.0334
0.0332
334
2.990
2.988
2.993
2.995
2.621
2.619
2.623
2.621
2.626
2.628
2.995
2.997
0.0087
0.0085
0.0334
0.0332
335
3.115
3.113
3.118
3.120
2.746
2.744
2.748
2.746
2.751
2.753
3.120
3.122
0.0088
0.0087
0.0334
0.0332
336
3.240
3.238
3.243
3.245
2.871
2.869
2.873
2.871
2.876
2.878
3.245
3.247
0.0089
0.0088
0.0334
0.0332
337
3.365
3.363
3.368
3.370
2.996
2.994
2.997
2.995
3.000
3.002
3.369
3.371
0.0087
0.0087
0.0335
0.0335
338
3.490
3.488
3.493
3.495
3.121
3.119
3.122
3.120
3.125
3.127
3.494
3.496
0.0088
0.0088
0.0335
0.0335
339
3.615
3.613
3.618
3.620
3.246
3.244
3.247
3.245
3.250
3.252
3.619
3.621
0.0089
0.0089
0.0335
0.0335
340
3.740
3.738
3.743
3.745
3.371
3.369
3.372
3.370
3.375
3.377
3.744
3.746
0.0090
0.0090
0.0335
0.0335
341
3.865
3.863
3.868
3.870
3.496
3.494
3.497
3.495
3.500
3.502
3.869
3.871
0.0091
0.0090
0.0335
0.0335
Design Table 5-1: Gland Design, O-Ring and Other Elastomeric Seals (SAE AS4716)
5-30
Seals
5700 Handbook
Piston
or
Cylinder
OD
C
Cylinder
Bore
ID
A
Gland
OD
F
Rod or
Gland
Sleeve
OD
B
Rod
Bore
ID
H
Gland
ID
J
Actual
Minimum Squeeze
Actual
Maximum Squeeze
Piston
Rod
Piston
Rod
342
3.990
3.988
3.993
3.995
3.621
3.619
3.622
3.620
3.625
3.627
3.994
3.996
0.0090
0.0089
0.0335
0.0335
343
4.115
4.113
4.118
4.120
3.746
3.744
3.747
3.745
3.750
3.752
4.119
4.121
0.0090
0.0090
0.0335
0.0335
344
4.240
4.238
4.243
4.245
3.871
3.869
3.872
3.870
3.875
3.877
4.244
4.246
0.0091
0.0091
0.0335
0.0335
345
4.365
4.363
4.368
4.370
3.966
3.994
3.997
3.995
4.000
4.002
4.369
4.371
0.0092
0.0091
0.0335
0.0335
346
4.489
4.487
4.493
4.495
4.121
4.119
4.122
4.120
4.125
4.127
4.494
4.496
0.0087
0.0092
0.0340
0.0335
347
4.614
4.612
4.618
4.620
4.246
4.244
4.247
4.245
4.250
4.252
4.619
4.621
0.0087
0.0092
0.0340
0.0335
348
4.739
4.737
4.743
4.745
4.371
4.369
4.372
4.370
4.375
4.377
4.744
4.746
0.0088
0.0092
0.0340
0.0335
349
4.864
4.862
4.868
4.870
4.496
4.494
4.497
4.495
4.500
4.502
4.869
4.871
0.0088
0.0093
0.0340
0.0335
425
4.970
4.968
4.974
4.977
4.497
4.494
4.497
4.494
4.501
4.503
4.974
4.977
0.0175
0.0175
0.0480
0.0480
426
5.095
5.093
5.099
5.102
4.622
4.619
4.622
4.619
4.626
4.628
5.099
5.102
0.0176
0.0176
0.0480
0.0480
427
5.220
5.218
5.224
5.227
4.747
4.744
4.747
4.744
4.751
4.753
5.224
5.227
0.0176
0.0176
0.0480
0.0480
428
5.345
5.343
5.349
5.352
4.872
4.869
4.872
4.869
4.876
4.878
5.349
5.352
0.0177
0.0177
0.0480
0.0480
429
5.470
5.468
5.474
5.477
4.997
4.994
4.997
4.994
5.001
5.003
5.474
5.477
0.0176
0.0176
0.0480
0.0480
430
5.595
5.593
5.599
5.602
5.122
5.119
5.122
5.119
5.126
5.128
5.599
5.602
0.0176
0.0176
0.0480
0.0480
431
5.720
5.718
5.724
5.727
5.247
5.244
5.247
5.244
5.251
5.253
5.724
5.727
0.0177
0.0177
0.0480
0.0480
432
5.845
5.843
5.849
5.852
5.372
5.369
5.372
5.369
5.376
5.378
5.849
5.852
0.0178
0.0178
0.0480
0.0480
433
5.970
5.968
5.974
5.977
5.497
5.494
5.497
5.494
5.501
5.503
5.974
5.977
0.0178
0.0178
0.0480
0.0480
434
6.095
6.093
6.099
6.102
5.622
5.619
5.622
5.619
5.626
5.628
6.099
6.102
0.0179
0.0179
0.0480
0.0480
435
6.220
6.218
6.224
6.227
5.747
5.744
5.747
5.744
5.751
5.753
6.224
6.227
0.0179
0.0179
0.0480
0.0480
436
6.345
6.343
6.349
6.352
5.872
5.869
5.872
5.869
5.876
5.878
6.349
6.352
0.0180
0.0180
0.0480
0.0480
437
6.470
6.468
6.474
6.477
5.997
5.994
5.997
5.994
6.001
6.003
6.474
6.477
0.0180
0.0180
0.0480
0.0480
438
6.720
6.718
6.724
6.727
6.247
6.244
6.247
6.244
6.251
6.253
6.724
6.727
0.0180
0.0180
0.0480
0.0480
Design Table 5-1: Gland Design, O-Ring and Other Elastomeric Seals (SAE AS4716)
5-31
Seals
5700 Handbook
Piston
or
Cylinder
OD
C
Cylinder
Bore
ID
A
Gland
OD
F
Rod or
Gland
Sleeve
OD
B
Rod
Bore
ID
H
Gland
ID
J
Actual
Minimum Squeeze
Actual
Maximum Squeeze
Piston
Rod
Piston
Rod
439
6.970
6.968
6.974
6.977
6.497
6.494
6.497
6.494
6.501
6.504
6.974
6.977
0.0181
0.0176
0.0480
0.0485
440
7.220
7.218
7.224
7.227
6.747
6.744
6.747
6.744
6.751
6.754
7.224
7.227
0.0182
0.0177
0.0480
0.0485
441
7.470
7.468
7.474
7.477
6.997
6.994
6.997
6.994
7.001
7.004
7.474
7.477
0.0182
0.0177
0.0480
0.0485
442
7.720
7.718
7.724
7.727
7.247
7.244
7.247
7.244
7.251
7.254
7.724
7.727
0.0181
0.0176
0.0480
0.0485
443
7.970
7.968
7.974
7.977
7.497
7.494
7.497
7.494
7.501
7.504
7.974
7.977
0.0182
0.0177
0.0480
0.0485
444
8.220
8.218
8.224
8.227
7.747
7.744
7.747
7.744
7.751
7.754
8.224
8.227
0.0183
0.0178
0.0480
0.0485
445
8.470
8.468
8.474
8.477
7.997
7.994
7.997
7.994
8.001
8.004
8.474
8.477
0.0183
0.0178
0.0480
0.0485
446
8.970
8.967
8.974
8.977
8.497
8.494
8.497
8.494
8.501
8.504
8.974
8.977
0.0177
0.0177
0.0485
0.0485
447
9.470
9.467
9.474
9.478
8.997
8.994
8.997
8.994
9.001
9.004
9.474
9.478
0.0168
0.0173
0.0485
0.0485
448
9.970
9.967
9.974
9.978
9.497
9.494
9.497
9.494
9.501
9.504
9.974
9.978
0.0169
0.0174
0.0485
0.0485
449
10.470
10.467
10.474
10.478
9.997
9.994
9.997
9.994
10.001
10.004
10.474
10.478
0.0170
0.0175
0.0485
0.0485
450
10.970
10.967
10.974
10.978
10.497
10.494
10.497
10.494
10.501
10.504
10.974
10.978
0.0170
0.0175
0.0485
0.0485
451
11.470
11.467
11.474
11.478
10.997
10.994
10.997
10.994
11.001
11.004
11.474
11.478
0.0170
0.0176
0.0485
0.0485
452
11.970
11.967
11.974
11.978
11.497
11.494
11.497
11.494
11.501
11.504
11.974
11.978
0.0171
0.0176
0.0485
0.0485
453
12.470
12.467
12.474
12.478
11.997
11.994
11.997
11.994
12.001
12.004
12.474
12.478
0.0172
0.0177
0.0485
0.0485
454
12.970
12.967
12.974
12.978
12.497
12.494
12.497
12.494
12.501
12.504
12.974
12.978
0.0173
0.0178
0.0485
0.0485
455
13.470
13.467
13.474
13.478
12.997
12.994
12.997
12.994
13.001
13.004
13.474
13.478
0.0173
0.0178
0.0485
0.0485
456
13.970
13.967
13.974
13.978
13.497
13.494
13.497
13.494
13.501
13.504
13.974
13.978
0.0172
0.0177
0.0485
0.0485
457
14.470
14.467
14.474
14.478
13.997
13.994
13.997
13.994
14.001
14.004
14.474
14.478
0.0173
0.0178
0.0485
0.0485
458
14.970
14.967
14.974
14.978
14.497
14.494
14.497
14.494
14.501
14.504
14.974
14.978
0.0173
0.0178
0.0485
0.0485
459
15.470
15.467
15.474
15.478
14.997
14.994
14.997
14.994
15.001
15.004
15.474
15.478
0.0174
0.0179
0.0485
0.0485
460
15.970
15.967
15.974
15.978
15.497
15.494
15.497
15.494
15.501
15.504
15.974
15.978
0.0174
0.0179
0.0485
0.0485
Design Table 5-1: Gland Design, O-Ring and Other Elastomeric Seals (SAE AS4716)
5-32
Seals
5700 Handbook
Select Closest
Dimension
In Column
Read
Horizontally
In Column
To Determine
Dimension For
B-1
C
G
OD of piston
A
B-1
G
OD of rod
A-1
D
G
A-1
B
G
After selecting gland dimensions, read horizontally to determine proper O-ring size number.
Specify compound.
5-33
Seals
5700 Handbook
B Rod O.D.
D Rod Bore Dia.
Gland Detail
0 to 5
(Typ.)
Break Corners
Approx. .005 Rad.
1/2E
32
Gland
Depth
Pressure
.005
Typ.
16
Pressure
Pressure
I.D.
F Groove
Depth (Ref.)
.003 Typ.
G1
G2
Section W-W
No
Parbak
Ring
One
Parbak
Ring
Two
Parbak
Rings
Surface Finish X:
32 Without Parbak Ring
63 With Parbak Ring
Refer to Design Chart 5-2 (below) and Design Table 5-2 for dimensions.
1/16
104
through
116
3/32
201
through
222
L
Gland
Depth
Squeeze
Actual
%
E(a)
G-GrooveWidth
Diametral NoParbak OneParbak TwoParbak
Clearance Ring(G)
Ring(G1)
Rings(G2)
R
Groove
Radius
Max.
Eccentricity(b)
.070
.003
.055
to
.057
.010
to
.018
15
to
25
.002
to
.005
.093
to
.098
.138
to
.143
.205
to
.210
.005
to
.015
.002
.103
.003
116
.088
to
.090
.010
to
.018
10
to
17
.002
to
.005
.140
to
.145
.171
to
.176
.238
to
.243
.005
to
.015
.002
1/8
.139
.004
.121
to
.123
.012
to
.022
9
to
16
.003
to
.006
.187
to
.192
.208
to
.213
.275
to
.280
.010
to
.025
.003
309
through
349
3/16
.210
.005
.185
to
.188
.017
to
.030
8
to
14
.003
to
.006
.281
to
.286
.311
to
.316
.410
to
.415
.020
to
.035
.004
425
through
460
1/4
.275
.006
.237
to
.240
.029
to
.044
11
to
16
.004
to
.007
.375
to
.380
.408
to
.413
.538
to
.543
.020
to
.035
.005
(a) Clearance (extrusion gap) must be held to a minimum consistent with design requirements for temperature range variation.
(b) Total indicator reading between groove and adjacent bearing surface.
Design Chart 5-2: Design Chart for Industrial Reciprocating O-Ring Packing Glands
5-34
Seals
5700 Handbook
Dimensions
I.D.
006
007
008
009
010
.114
.145
.176
.208
.239
.005
.005
.005
.005
.005
011
012
.301
.364
104
105
106
107
108
A
A-1
Bore Dia. Groove Dia.
(Cylinder) (Rod Gland)
Mean
+.002
+.002
O.D. (Ref)
-.000
-.000
B
OD
(Rod)
+.000
-.002
B-1
C
Groove Dia.
OD
*(Piston) (Piston)
+.000
+.000
-.002
-.001
D
Bore Dia.
(Rod)
+.001
-.000
.254
.285
.316
.348
.379
.249
.280
.311
.343
.374
.234
.265
.296
.328
.359
.124
.155
.186
.218
.249
.139
.170
.201
.233
.264
*.247
*.278
*.309
*.341
*.372
.126
.157
.188
.220
.251
.005
.005
.441
.504
.436
.499
.421
.484
.311
.374
.326
.389
*.434
*.497
.313
.376
.112
.143
.174
.206
.237
.005
.005
.005
.005
.005
.318
.349
.380
.412
.443
.312
.343
.374
.406
.437
.300
.331
.362
.394
.425
.124
.155
.186
.218
.249
.136
.167
.198
.230
.261
*.310
*.341
*.372
*.404
*.435
.126
.157
.188
.220
.251
109
110
111
112
113
.299
.362
.424
.487
.549
.005
.005
.005
.005
.007
.505
.568
.630
.693
.755
.499
.562
.624
.687
.749
.487
.550
.612
.675
.737
.311
.374
.436
.499
.561
.323
.386
.488
.511
.573
*.497
*.560
*.622
*.685
*.747
.313
.376
.438
.501
.563
114
115
116
.612
.674
.737
.009
.009
.009
.818
.880
.943
.812
.874
.937
.800
.862
.925
.624
.686
.749
.636
.698
.761
.810
.872
.935
.626
.688
.751
201
202
203
204
205
.171
.234
.296
.359
.421
.005
.005
.005
.005
.005
.449
.512
.574
.637
.699
.437
.500
.562
.625
.687
.427
.490
.552
.615
.677
.185
.248
.310
.373
.435
.195
.258
.320
.383
.445
*.434
*.497
*.559
.662
.684
.188
.251
.313
.376
.438
206
207
208
209
210
.484
.546
.609
.671
.734
.005
.007
.009
.009
.010
.762
.824
.887
.949
1.012
.750
.812
.875
.937
1.000
.740
.802
.865
.927
.990
.498
.560
.623
.685
.748
.508
.570
.633
.695
.758
.747
.809
.872
.934
.997
.501
.563
.626
.688
.751
211
212
213
214
215
.796
.859
.921
.984
1.046
.010
.010
.010
.010
.010
1.074
1.137
1.199
1.262
1.324
1.062
1.125
1.187
1.250
1.312
1.052
1.115
1.177
1.240
1.302
.810
.873
.935
.998
1.060
.820
.883
.945
1.008
1.070
1.059
1.122
1.184
1.247
1.309
.813
.876
.938
1.001
1.063
216
217
218
219
220
1.109
1.171
1.234
1.296
1.359
.012
.012
.012
.012
.012
1.387
1.449
1.512
1.574
1.637
1.375
1.437
1.500
1.562
1.625
1.365
1.427
1.490
1.552
1.615
1.123
1.185
1.248
1.310
1.373
1.133
1.195
1.258
1.320
1.383
1.372
1.434
1.497
1.559
1.622
1.126
1.188
1.251
1.313
1.376
221
222
1.421
1.484
.012
.015
1.699
1.762
1.687
1.750
1.677
1.740
1.435
1.498
1.445
1.508
1.684
1.747
1.438
1.501
.070
.003
.103
.003
.139
.004
G
Width
Groove
+.005
-.000
.093
.140
.187
* These designs require considerable installation stretch. If assembly breakage is incurred use a compound having higher elongation
or use a two-piece piston.
This groove width does not permit the use of Parbak rings. For pressures above 103.5 Bar (1500 PSI), consult Design Chart 5-2 for
groove widths where Parbak rings must be used.
Design Table 5-2: Gland Dimensions for Industrial Reciprocating O-Ring Seals, 103.5 Bar (1500 PSI) Max.
5-35
Seals
5700 Handbook
Dimensions
I.D.
A
A-1
Bore Dia. Groove Dia.
(Cylinder) (Rod Gland)
Mean
+.002
+.002
O.D. (Ref)
-.000
-.000
B
OD
(Rod)
+.000
-.002
B-1
C
Groove Dia.
OD
*(Piston) (Piston)
+.000
+.000
-.002
-.001
D
Bore Dia.
(Rod)
+.001
-.000
309
310
311
312
313
.412
.475
.537
.600
.662
.005
.005
.007
.009
.009
.832
.895
.957
1.020
1.082
.812
.875
.937
1.000
1.062
.805
.868
.930
.993
1.055
.435
.498
.560
.623
.685
.442
.505
.567
.630
.692
*.809
*.872
*.943
.997
1.059
.438
.501
.563
.626
.688
314
315
316
317
318
.725
.787
.850
.912
.975
.010
.010
.010
.010
.010
1.145
1.207
1.270
1.332
1.395
1.125
1.187
1.250
1.312
1.375
1.118
1.180
1.243
1.305
1.368
.748
.810
.873
.935
.998
.755
.817
.880
.942
1.005
1.122
1.184
1.247
1.309
1.372
.751
.813
.876
.938
1.001
319
320
321
322
323
1.037
1.100
1.162
1.225
1.287
.010
.012
.012
.012
.012
1.457
1.520
1.582
1.645
1.707
1.437
1.500
1.562
1.625
1.687
1.430
1.493
1.555
1.618
1.680
1.060
1.123
1.185
1.248
1.310
1.067
1.130
1.192
1.255
1.317
1.434
1.497
1.559
1.622
1.648
1.063
1.126
1.188
1.251
1.313
324
1.350
.012
1.770
1.750
1.373
1.376
1.475
1.600
.015
.015
1.895
2.020
1.875
2.000
1.498
1.623
1.380
+.000
-.004
1.505
1.630
1.747
325
326
1.743
+.004
-.000
1.868
1.993
1.872
1.997
1.501
1.626
327
328
329
330
331
1.725
1.850
1.975
2.100
2.225
.015
.015
.018
.018
.018
2.145
2.270
2.395
2.520
2.645
2.125
2.250
2.375
2.500
2.625
2.118
2.243
2.368
2.493
2.618
1.748
1.873
1.998
2.123
2.248
1.755
1.880
2.005
2.130
2.255
2.122
2.247
2.372
2.497
2.622
1.751
1.876
2.001
2.126
2.251
332
333
334
335
336
2.350
2.475
2.600
2.725
2.850
.018
.020
.020
.020
.020
2.770
2.895
3.020
3.145
3.270
2.750
2.875
3.000
3.125
3.250
2.743
2.868
2.993
3.118
3.243
2.373
2.498
2.623
2.748
2.873
2.380
2.505
2.630
2.755
2.880
2.747
2.872
2.997
3.122
3.247
2.376
2.501
2.626
2.751
2.876
337
338
339
340
341
2.975
3.100
3.225
3.350
3.475
.024
.024
.024
.024
.024
3.395
3.520
3.645
3.770
3.895
3.375
3.500
3.625
3.750
3.875
3.368
3.493
3.618
3.743
3.868
2.998
3.123
3.248
3.373
3.498
3.005
3.130
3.255
3.380
3.505
3.372
3.497
3.622
3.747
3.872
3.001
3.126
3.251
3.376
3.501
342
343
344
3.600
3.725
3.850
.028
.028
.028
4.020
4.145
4.270
4.000
4.125
4.250
3.993
4.118
4.243
3.623
3.748
3.873
3.630
3.755
3.880
3.997
4.122
4.247
3.626
3.751
3.876
345
346
347
348
349
3.975
4.100
4.225
4.350
4.475
.028
.028
.030
.030
.030
4.395
4.520
4.645
4.773
4.895
4.375
4.500
4.625
4.750
4.875
4.368
4.493
4.618
4.743
4.868
3.998
4.123
4.248
4.373
4.498
4.005
4.130
4.255
4.380
4.505
4.372
4.497
4.622
4.747
4.872
4.001
4.126
4.251
4.376
4.501
.210
.005
G
Width
Groove
+.005
-.000
.281
* These designs require considerable installation stretch. If assembly breakage is incurred use a compound having higher elongation
or use a two-piece piston.
This groove width does not permit the use of Parbak rings. For pressures above 103.5 Bar (1500 PSI), consult Design Chart 5-2 for
groove widths where Parbak rings must be used.
Design Table 5-2: Gland Dimensions for Industrial Reciprocating O-Ring Seals, 103.5 Bar (1500 PSI) Max.
5-36
Seals
5700 Handbook
Dimensions
A
A-1
Bore Dia. Groove Dia.
(Cylinder) (Rod Gland)
Mean
+.002
+.004
O.D. (Ref)
-.000
-.000
B
OD
(Rod)
+.000
-.002
B-1
C
Groove Dia.
OD
*(Piston) (Piston)
+.000
+.000
-.004
-.001
D
Bore Dia.
(Rod)
+.001
-.000
Parker No.
2-
I.D.
425
426
427
428
429
4.475
4.600
4.725
4.850
4.975
.033
.033
.033
.033
.037
5.025
5.150
5.275
5.400
5.525
5.002
5.127
5.252
5.377
5.502
4.971
5.096
5.221
5.346
5.471
4.497
4.622
4.747
4.872
4.997
4.528
4.653
4.778
4.903
5.028
4.998
5.123
5.248
5.373
5.498
4.501
4.626
4.751
4.876
5.001
430
431
432
433
434
5.100
5.225
5.350
5.475
5.600
.037
.037
.037
.037
.037
5.650
5.775
5.900
6.025
6.150
5.627
5.752
5.877
6.002
6.127
5.596
5.721
5.846
5.971
6.096
5.122
5.247
5.372
5.497
5.622
5.153
5.278
5.403
5.528
5.653
5.623
5.748
5.873
5.998
6.123
5.126
5.251
5.376
5.501
5.626
435
436
437
438
439
5.725
5.850
5.975
6.225
6.475
.037
.037
.037
.040
.040
6.275
6.400
6.525
6.775
7.025
6.252
6.377
6.502
6.752
7.002
6.221
6.346
6.471
6.721
6.971
5.747
5.872
5.997
6.247
6.497
5.778
5.903
6.028
6.278
6.528
6.248
6.373
6.498
6.748
6.998
5.751
5.876
6.001
6.251
6.501
440
441
442
443
444
6.725
6.975
7.225
7.475
7.725
.040
.040
.045
.045
.045
7.275
7.525
7.775
8.025
8.275
7.252
7.502
7.752
8.002
8.252
7.221
7.471
4.721
7.971
8.221
6.747
6.997
7.247
7.497
7.747
6.778
7.028
7.278
7.528
7.778
7.248
7.498
7.748
7.998
8.248
6.751
7.001
7.251
7.501
7.751
445
446
447
448
449
7.975
8.475
8.975
9.475
9.975
.045
.055
.055
.055
.055
8.525
9.025
9.525
10.025
10.525
8.502
9.002
9.502
10.002
10.502
8.471
8.971
9.471
9.971
10.471
7.997
8.497
8.997
9.497
9.997
8.028
8.528
9.028
9.528
10.028
8.498
8.998
9.498
9.998
10.498
8.001
8.501
9.001
9.501
10.001
450
451
452
453
454
10.475
10.975
11.475
11.975
12.475
.060
.060
.060
.060
.060
11.025
11.525
12.025
12.525
13.025
11.002
11.502
12.002
12.502
13.002
10.971
11.471
11.971
12.471
12.971
10.497
10.997
11.497
11.997
12.497
10.528
11.028
11.528
12.028
12.528
10.998
11.498
11.998
12.498
12.998
10.501
11.001
11.501
12.001
12.501
455
456
457
458
459
12.975
13.475
13.975
14.475
14.975
.060
.070
.070
.070
.070
13.525
14.025
14.525
15.025
15.525
13.502
14.002
14.502
15.002
15.502
13.471
13.971
14.471
14.971
15.471
12.997
13.497
13.997
14.497
14.997
13.028
13.528
14.028
14.528
15.028
13.498
13.998
14.498
14.998
15.498
13.001
13.501
14.001
14.501
15.001
460
15.475
.070
16.025
16.002
15.971
15.497
15.528
15.998
15.501
.275
.006
G
Width
Groove
+.005
-.000
.375
* These designs require considerable installation stretch. If assembly breakage is incurred use a compound having higher elongation
or use a two-piece piston.
This groove width does not permit the use of Parbak rings. For pressures above 103.5 Bar (1500 PSI), consult Design Chart 5-2 for
groove widths where Parbak rings must be used.
Design Table 5-2: Gland Dimensions for Industrial Reciprocating O-Ring Seals, 103.5 Bar (1500 PSI) Max.
5-37
Seals
5700 Handbook
Select Closest
Horizontally
In Column
Dimension
In Column
OD of piston
Read
To Determine
Dimension For
B-1
C
G
A
B-1
G
After selecting gland dimensions, read horizontally to determine proper O-ring size number.
Specify compound.
Refer to 8-2, Military Fluid Specification Description, Fluid Compatibility Tables, or Table
3-1 to select the proper compound. The effective part number for an O-ring consists of both
a size number and a compound number.
5-38
Seals
5700 Handbook
.005
Typ.
16
32
32
R
32
Gland
Depth
.
I.D
.003 Typ.
F Groove
Depth (Ref.)
Section W-W
Gland Detail
Finishes are RMS values
Refer to Design Chart 5-3 (below) and Design Table 5-3 for dimensions.
W
Cross Section
Nominal
Actual
1/16
.070
.003
3/32
.103
.003
1/8
.139
.004
3/16
.210
.005
1/4
.275
.006
P (c)
Peripheral
Squeeze
(Variable)
L
Gland
Depth
G
Groove
Width
E
Diametral
Clearance
.035
to
.042
.038
to
.062
.061
to
.082
.084
to
.124
.140
to
.175
.072
to
.076
.105
to
.109
.143
to
.147
.214
to
.218
.282
to
.286
.075
to
.079
.111
to
.115
.151
to
.155
.229
to
.233
.301
to
.305
.002
to
.010
.002
to
.010
.003
to
.011
.003
to
.011
.004
to
.012
Eccentricity
Max. (b)
.002
.002
.003
.004
.005
R
Groove
Radius
.005
to
.015
.005
to
.015
.010
to
.025
.020
to
.035
.020
to
.035
Design Chart 5-3: Design Chart for Floating Pneumatic Piston Ring Seal Glands
5-39
Seals
5700 Handbook
Dimensions
A
Bore Dia.
(Cylinder)
+.004
-.000
B-1
Groove Dia.
(Piston)
+.000
-.004
C
OD
(Piston)
+.000
-.004
G
Groove
Width
+.004
-.000
Mean
O.D. (Ref)
.070
.003
.254
.285
.316
.348
.379
.219
.249
.279
.309
.339
.075
.105
.135
.165
.195
*.217
*.247
*.277
*.307
*.377
.005
.005
.441
.504
.400
.462
.256
.318
*.398
.460
.041
.042
.112
.143
.174
.206
.237
.005
.005
.005
.005
.005
.318
.349
.380
.412
.443
.280
.309
.338
.368
.397
.070
.099
.128
.158
.187
*.278
*.307
*.336
*.366
*.395
.038
.040
.042
.044
.046
109
110
111
112
113
.299
.362
.424
.487
.549
.005
.005
.005
.005
.007
.505
.568
.630
.693
.755
.457
.518
.578
.639
.699
.247
.308
.368
.429
.489
*.455
*.516
*.576
.637
.697
114
115
116
.612
.674
.737
.009
.009
.009
.818
.880
.943
.760
.820
.881
.550
.610
.671
.758
.818
.879
.058
.060
.062
201
202
203
204
205
.171
.234
.296
.359
.421
.005
.005
.005
.005
.005
.449
.512
.574
.637
.699
.388
.450
.511
.573
.634
.102
.164
.255
.287
.348
*.385
*.447
*.508
.570
.631
.061
.062
.063
.064
.065
206
207
208
209
210
.484
.546
.609
.671
.734
.005
.007
.009
.009
.010
.762
.824
.887
.949
1.012
.696
.757
.819
.880
.942
.410
.471
.533
.594
.656
.693
.754
.816
.877
.939
.066
.067
.068
.069
.070
211
212
213
214
215
.796
.859
.921
.984
1.046
.010
.010
.010
.010
.010
1.074
1.137
1.199
1.262
1.324
1.003
1.065
1.126
1.188
1.249
.717
.779
.840
.902
.963
1.000
1.026
1.123
1.185
1.246
216
217
218
219
220
1.109
1.171
1.234
1.296
1.359
.012
.012
.012
.012
.012
1.387
1.449
1.512
1.574
1.637
1.311
1.372
1.434
1.495
1.557
1.025
1.086
1.148
1.209
1.271
1.308
1.369
1.431
1.492
1.554
.076
.077
.078
.079
.080
221
222
1.421
1.484
.012
.015
1.699
1.762
1.618
1.680
1.332
1.394
1.615
1.677
.081
.082
309
310
311
.412
.475
.537
.005
.005
.007
.832
.895
.957
.748
.810
.871
.320
.382
.443
.745
.807
.868
Parker No.
2-
I.D.
006
007
008
009
010
.114
.145
.176
.208
.239
.005
.005
.005
.005
.005
011
012
.301
.364
104
105
106
107
108
.103
.003
.139
.004
.210
.105
.075
.111
.151
.229
Peripheral
Squeeze
.035
.036
.037
.039
.040
.048
.050
.052
.054
.056
.071
.072
.073
.074
.075
.084
.085
.086
* These designs require considerable installation stretch. If assembly breakage is incurred use a compound having higher elongation
or use a two-piece piston.
Design Table 5-3: Floating Pneumatic Piston Ring Seal Gland Dimensions
5-40
Seals
5700 Handbook
Mean
O.D. (Ref)
.009
.009
.010
.010
.010
1.020
1.082
1.145
1.207
1.270
.933
.994
1.056
1.117
1.179
.505
.566
.628
.689
.751
.930
.991
1.053
1.114
1.176
.087
.088
.089
.090
.091
.912
.975
1.037
1.100
1.162
.010
.010
.010
.012
.012
1.332
1.395
1.457
1.520
1.582
1.240
1.302
1.363
1.425
1.486
.812
.874
.935
.997
1.058
1.237
1.299
1.360
1.422
1.483
.092
.093
.094
.095
.096
322
323
324
325
326
1.225
1.287
1.350
1.475
1.600
.012
.012
.012
.015
.015
1.645
1.707
1.770
1.895
2.020
1.548
1.609
1.671
1.795
1.919
1.120
1.181
1.243
1.367
1.491
1.545
1.636
1.668
1.792
1.916
.097
.098
.099
.100
.101
327
328
329
330
331
1.725
1.850
1.975
2.100
2.225
.015
.015
.018
.018
.018
2.145
2.270
2.395
2.520
2.645
2.043
2.167
2.291
2.415
2.539
1.615
1.739
1.863
1.987
2.111
2.040
2.164
2.288
2.412
2.536
.102
.103
.104
.105
.106
332
333
334
335
336
2.350
2.475
2.600
2.725
2.850
.018
.020
.020
.020
.020
2.770
2.895
3.020
3.145
3.270
2.663
2.787
2.991
3.035
3.159
2.235
2.359
2.483
2.607
2.731
2.660
2.784
2.908
3.032
3.156
.107
.108
.109
.110
.111
337
338
339
340
341
2.975
3.100
3.225
3.350
3.475
.024
.024
.024
.024
.024
3.395
3.520
3.645
3.770
3.895
3.283
3.407
3.531
3.655
3.779
2.855
2.979
3.103
3.270
3.351
3.280
3.404
3.528
3.652
3.776
.112
.113
.114
.115
.116
342
343
344
345
346
3.600
3.725
3.850
3.975
4.100
.028
.028
.028
.028
.028
4.020
4.145
4.270
4.395
4.520
3.903
4.027
4.151
4.275
4.399
3.475
3.599
3.723
3.847
3.971
3.900
4.024
4.148
4.272
4.396
.117
.118
.119
.120
.121
347
348
349
4.225
4.350
4.475
.030
.030
.030
4.645
4.773
4.895
4.523
4.647
4.771
4.095
4.219
4.343
4.520
4.644
4.768
.122
.123
.124
425
426
427
428
429
4.475
4.600
4.725
4.850
4.975
.033
.033
.033
.033
.037
5.025
5.150
5.275
5.400
5.525
4.885
5.009
5.133
5.257
5.381
4.321
4.445
4.569
4.693
4.817
4.881
5.005
5.129
5.253
5.377
.140
.141
.142
.143
.144
430
431
432
5.100
5.225
5.350
.037
.037
.037
5.650
5.775
5.900
5.505
5.629
5.753
4.941
5.065
5.189
5.501
5.625
5.749
Dimensions
Parker No.
2-
I.D.
312
313
314
315
316
.600
.662
.725
.787
.850
317
318
319
320
321
.210
.005
.275
.006
B-1
Groove Dia.
(Piston)
+.000
-.004
C
OD
(Piston)
+.000
-.004
A
Bore Dia.
(Cylinder)
+.004
-.000
O-Ring
Size
G
Groove
Width
+.004
-.000
.229
.301
Peripheral
Squeeze
.145
.146
.147
* These designs require considerable installation stretch. If assembly breakage is incurred use a compound having higher elongation
or use a two-piece piston.
Design Table 5-3: Floating Pneumatic Piston Ring Seal Gland Dimensions
5-41
Seals
5700 Handbook
Mean
O.D. (Ref)
A
Bore Dia.
(Cylinder)
+.004
-.000
B-1
Groove Dia.
(Piston)
+.000
-.004
Dimensions
C
OD
(Piston)
+.000
-.004
G
Groove
Width
+.004
-.000
Parker No.
2-
I.D.
433
434
435
436
437
438
5.475
5.600
5.725
5.850
5.975
6.225
.037
.037
.037
.037
.037
.040
6.025
6.150
6.275
6.400
6.525
6.775
5.877
6.001
6.125
6.249
6.373
6.622
5.313
5.437
5.561
5.685
5.809
6.058
5.873
5.997
6.121
6.245
6.369
6.618
.148
.149
.150
.151
.152
.153
439
440
441
442
443
6.475
6.725
6.975
7.225
7.475
.040
.040
.040
.045
.045
7.025
7.275
7.525
7.775
8.025
6.871
7.120
7.369
7.618
7.867
6.307
6.556
6.805
7.054
7.303
6.867
7.116
7.365
7.614
7.863
.154
.155
.156
.157
.158
444
445
446
447
448
7.725
7.975
8.475
8.975
9.475
.045
.045
.055
.055
.055
8.275
8.525
9.025
9.525
10.025
8.116
8.365
8.864
9.363
9.862
7.552
7.801
8.300
8.799
9.298
8.112
8.361
8.860
9.359
9.858
.159
.160
.161
.162
.163
449
450
451
452
453
9.975
10.475
10.975
11.475
11.975
.055
.060
.060
.060
.060
10.525
11.025
11.525
12.025
12.525
10.361
10.860
11.359
11.858
12.357
9.797
10.296
10.795
11.294
11.793
10.357
10.856
11.355
11.854
12.353
.164
.165
.166
.167
.168
454
455
456
457
458
12.475
12.975
13.475
13.975
14.475
.060
.060
.070
.070
.070
13.025
13.525
14.025
14.525
15.025
12.856
13.355
13.854
14.353
14.852
12.292
12.791
13.290
13.789
14.288
12.852
13.351
13.850
14.349
14.848
.169
.170
.171
.172
.173
459
460
14.975
15.475
.070
.070
15.525
16.025
15.351
15.850
14.787
15.286
15.347
15.846
.174
.175
.275
.006
.301
Peripheral
Squeeze
* These designs require considerable installation stretch. If assembly breakage is incurred use a compound having higher elongation
or use a two-piece piston.
Design Table 5-3: Floating Pneumatic Piston Ring Seal Gland Dimensions
5-42
Seals
5700 Handbook
Select Closest
Dimension
In Column
Read
Horizontally
In Column
To Determine
Dimension For
OD of shaft
A-1
D
G
Throat Dia.
A-1
B
G
After selecting gland dimensions, read horizontally to determine proper O-ring size number.
Specify compound. Refer to the discussion on rotary seals earlier in this chapter for the
selection of the proper compound The effective part number for an O-ring consists of both a
size number and a compound number.
5-43
Seals
5700 Handbook
Pressure
A-1 Dia.
(A-1 Min. = B Max. + 2L Min.)
1/2 E
16 Max.
M
B Dia. = O-ring I.D. + .002
D Dia.
(D Min. = B Max. + E Min.)
0 to 5 Typ.
Break Edges
(0 Preferred) Approx. .005 Rad.
1/2 E
.005
Typ.
16
32
32
32
R
F
Gland
Depth
I.D.
.003 Typ.
Section W-W
F Groove
Depth (Ref.)
Gland Detail
Finishes are RMS values
Note: Due to effect of centrifugal force, do not locate groove in shaft. Refer to Design Chart 5-4 (below) and Design Table 5-4 for
dimensions.
Design Chart 5-4 Rotary O-Ring Seal Glands, 55.2 Bar (800 PSI) Max. (c)
(Below 200 FPM, Use Design Chart 5-2)
O-Ring
Size
Parker
No. 2004
through
045
102
through
163
201
through
258
W
Cross Section
Maximum
Speed
FPM (a)
Squeeze
200
1500
0-11
Nominal
Actual
1/16
0.070
.003
3/32
0.103
.003
200
600
1-8 1/2
1/8
0.139
.004
200
400
0-7
L
Gland
Depth
G
Groove
Width
E (c)
Diametral
Clearance
0.065
to
0.067
0.097
to
0.099
0.133
to
0.135
0.075
to
0.079
0.108
to
0.112
0.144
to
0.148
0.012
to
0.016
0.012
to
0.016
0.016
to
0.020
Eccentricity
Max (b)
M
Bearing
Length
Min. (c)
0.002
0.700
0.002
1.030
0.003
1.390
R
Groove
Radius
0.005
to
0.015
0.005
to
0.015
0.010
to
0.025
Design Chart 5-4: Design Chart for Rotary O-Ring Seal Glands
5-44
Seals
5700 Handbook
Mean
O.D. (Ref)
B
OD
(Shaft)
+.000
-.001
A-1
Groove Dia.
(Gland)
+.003
-.000
Dimensions
D
Throat
Dia.
+.003
-.000
Parker No.
2-
I.D.
004
005
006
007
008
.070
.101
.114
.145
.176
.005
.005
.005
.005
.005
.210
.241
.254
.285
.316
.072
.103
.116
.147
.178
.202
.233
.246
.277
.308
.084
.115
.128
.159
.190
009
010
011
012
013
.208
.239
.301
.364
.426
.005
.005
.005
.005
.005
.348
.379
.441
.504
.566
.210
.241
.303
.366
.428
.340
.371
.433
.496
.558
.222
.253
.315
.378
.440
014
015
016
017
018
.489
.551
.614
.676
.739
.005
.007
.009
.009
.009
.629
.691
.754
.816
.879
.491
.553
.616
.678
.741
.621
.683
.746
.808
.871
.503
.565
.628
.693
.753
019
020
021
022
023
.801
.864
.926
.989
1.051
.009
.009
.009
.010
.010
.941
1.004
1.066
1.129
1.191
.803
.866
.928
.991
1.053
.933
.996
1.058
1.121
1.183
.815
.878
.940
1.003
1.065
024
025
026
027
028
1.114
1.176
1.239
1.301
1.364
.010
.011
.011
.011
.013
1.254
1.316
1.379
1.441
1.504
1.116
1.178
1.241
1.303
1.366
1.246
1.308
1.371
1.433
1.496
1.128
1.190
1.253
1.315
1.378
029
030
031
032
033
1.489
1.614
1.739
1.864
1.989
.013
.013
.015
.015
.018
1.629
1.754
1.879
2.004
2.129
1.491
1.616
1.741
1.866
1.991
1.621
1.746
1.871
1.996
2.121
1.503
1.628
1.753
1.878
2.003
034
035
036
037
038
2.114
2.239
2.364
2.489
2.614
.018
.018
.018
.018
.020
2.254
2.379
2.504
2.629
2.754
2.116
2.241
2.366
2.491
2.616
2.246
2.371
2.496
2.621
2.746
2.128
2.253
2.378
2.503
2.628
039
040
041
042
043
2.739
2.864
2.989
3.239
3.489
.020
.020
.024
.024
.024
2.879
3.004
3.129
3.379
3.629
2.741
2.866
2.991
3.241
3.491
2.871
2.996
3.121
3.371
3.621
2.753
2.878
3.003
3.253
3.503
044
045
3.739
3.989
.027
.027
3.879
4.129
3.741
3.991
3.871
4.121
3.753
4.003
102
103
104
105
106
.049
.081
.112
.143
.174
.005
.005
.005
.005
.005
.255
.287
.318
.349
.380
.051
.083
.114
.145
.176
.245
.277
.308
.339
.370
.063
.095
.126
.157
.188
.070
.003
.103
.003
G
Groove
Width
+.004
-.000
.075
.108
For pressures over 55.2 Bar (800 PSI), consult Design Chart 5-4 and the design sections of this Handbook.
Seals
5700 Handbook
Mean
O.D. (Ref)
B
OD
(Shaft)
+.000
-.001
A-1
Groove Dia.
(Gland)
+.003
-.000
Dimensions
D
Throat
Dia.
+.003
-.000
Parker No.
2-
I.D.
107
108
109
110
111
.206
.237
.299
.362
.424
.005
.005
.005
.005
.005
.412
.443
.505
.568
.630
.208
.239
.301
.364
.426
.402
.433
.495
.558
.620
.220
.251
.313
.376
.438
112
113
114
115
116
.487
.549
.612
.674
.737
.005
.007
.009
.009
.009
.693
.755
.818
.880
.943
.489
.551
.614
.676
.739
.683
.745
.808
.870
.933
.501
.563
.626
.688
.751
117
118
119
120
121
.799
.862
.924
.987
1.049
.010
.010
.010
.010
.010
1.005
1.068
1.130
1.193
1.255
.801
.864
.926
.989
1.051
.995
1.058
1.120
1.183
1.245
.813
.876
.938
1.001
1.063
122
123
124
125
126
1.112
1.174
1.237
1.299
1.362
.010
.012
.012
.012
.012
1.318
1.380
1.443
1.505
1.568
1.114
1.176
1.239
1.301
1.364
1.308
1.370
1.433
1.495
1.558
1.126
1.188
1.251
1.313
1.376
127
128
129
130
131
1.424
1.487
1.549
1.612
1.674
.012
.012
.015
.015
.015
1.630
1.693
1.755
1.818
1.880
1.426
1.489
1.551
1.614
1.676
1.620
1.683
1.745
1.808
1.870
1.438
1.501
1.563
1.626
1.688
132
133
134
135
136
1.737
1.799
1.862
1.925
1.987
.015
.015
.015
.017
.017
1.943
2.005
2.068
2.131
2.193
1.739
1.801
1.864
1.927
1.989
1.933
1.995
2.058
2.121
2.183
1.751
1.813
1.876
1.939
2.001
137
138
139
140
141
2.050
2.112
2.175
2.237
2.300
.017
.017
.017
.017
.020
2.256
2.318
2.381
2.443
2.506
2.052
2.114
2.177
2.239
2.302
2.246
2.308
2.371
2.433
2.496
2.064
2.126
2.189
2.251
2.314
142
143
144
145
146
2.362
2.425
2.487
2.550
2.612
.020
.020
.020
.020
.020
2.568
2.631
2.693
2.756
2.818
2.364
2.427
2.489
2.552
2.614
2.558
2.621
2.683
2.746
2.808
2.376
2.439
2.501
2.564
2.626
147
148
149
150
151
2.675
2.737
2.800
2.862
2.987
.022
.022
.022
.022
.024
2.881
2.943
3.006
3.068
3.193
2.677
2.739
2.802
2.864
2.989
2.871
2.933
2.996
3.058
3.183
2.689
2.751
2.814
2.876
3.001
152
153
3.237
3.487
.024
.024
3.443
3.693
3.239
3.489
3.433
3.683
3.251
3.501
.103
.003
G
Groove
Width
+.004
-.000
.108
For pressures over 55.2 Bar (800 PSI), consult Design Chart 5-4 and the design sections of this Handbook.
Seals
5700 Handbook
Dimensions
Parker No.
2-
I.D.
154
155
156
157
158
3.737
3.987
4.237
4.487
4.737
.028
.028
.030
.030
.030
159
160
161
162
163
4.987
5.237
5.487
5.737
5.987
201
202
203
204
205
Mean
O.D. (Ref)
B
OD
(Shaft)
+.000
-.001
A-1
Groove Dia.
(Gland)
+.003
-.000
D
Throat
Dia.
+.003
-.000
3.943
4.193
4.443
4.693
4.943
3.739
3.989
4.239
4.489
4.739
3.933
4.183
4.433
4.683
4.933
3.751
4.001
4.251
4.501
4.751
.035
.035
.035
.035
.035
5.193
5.443
5.693
5.943
6.193
4.989
5.239
5.489
5.739
5.989
5.183
5.433
5.683
5.933
6.183
5.001
5.251
5.501
5.751
6.001
.171
.234
.296
.359
.421
.005
.005
.005
.005
.005
.449
.512
.574
.637
.699
.173
.236
.298
.361
.423
.439
.502
.564
.627
.689
.189
.252
.314
.377
.439
206
207
208
209
210
.484
.546
.609
.671
.734
.005
.007
.009
.009
.010
.762
.824
.887
.949
1.012
.486
.548
.611
.673
.736
.752
.814
.877
.939
1.002
.502
.564
.627
.689
.752
211
212
213
214
215
.796
.859
.921
.984
1.046
.010
.010
.010
.010
.010
1.074
1.137
1.199
1.262
1.324
.798
.861
.923
.986
1.048
1.064
1.127
1.189
1.252
1.314
.814
.877
.939
1.002
1.064
216
217
218
219
220
1.109
1.171
1.234
1.296
1.359
.012
.012
.012
.012
.012
1.387
1.449
1.512
1.574
1.637
1.111
1.173
1.236
1.298
1.361
1.377
1.439
1.502
1.564
1.627
1.127
1.189
1.252
1.314
1.377
221
222
223
224
225
1.421
1.484
1.609
1.734
1.859
.012
.015
.015
.015
.018
1.699
1.762
1.887
2.012
2.137
1.423
1.486
1.611
1.736
1.861
1.689
1.752
1.877
2.002
2.127
1.439
1.502
1.627
1.752
1.877
226
227
228
229
230
1.984
2.109
2.234
2.359
2.484
.018
.018
.020
.020
.020
2.262
2.387
2.512
2.637
2.762
1.986
2.111
2.236
2.361
2.486
2.252
2.377
2.502
2.627
2.752
2.002
2.127
2.252
2.377
2.502
231
232
233
234
235
2.609
2.734
2.859
2.984
3.109
.020
.024
.024
.024
.024
2.887
3.012
3.137
3.262
3.387
2.611
2.736
2.861
2.986
3.111
2.877
3.002
3.127
3.252
3.377
2.627
2.752
2.877
3.002
3.127
236
237
3.234
3.359
.024
.024
3.512
3.637
3.236
3.361
3.502
3.627
3.252
3.377
.103
.003
.139
.004
G
Groove
Width
+.004
-.000
.108
.144
For pressures over 55.2 Bar (800 PSI), consult Design Chart 5-4 and the design sections of this Handbook.
Seals
5700 Handbook
Dimensions
Mean
O.D. (Ref)
B
OD
(Shaft)
+.000
-.001
A-1
Groove Dia.
(Gland)
+.003
-.000
D
Throat
Dia.
+.003
-.000
Parker No.
2-
I.D.
238
239
240
241
242
3.484
3.609
3.734
3.859
3.984
.024
.028
.028
.028
.028
3.762
3.887
4.012
4.137
4.262
3.486
3.611
3.736
3.861
3.986
3.752
3.877
4.002
4.127
4.252
3.502
3.627
3.752
3.877
4.002
243
244
245
246
247
4.109
4.234
4.359
4.484
4.609
.028
.030
.030
.030
.030
4.387
4.512
4.637
4.762
4.887
4.111
4.236
4.361
4.486
4.611
4.377
4.502
4.627
4.752
4.877
4.127
4.252
4.377
4.502
4.627
248
249
250
251
252
4.734
4.859
4.984
5.109
5.234
.030
.035
.035
.035
.035
5.012
5.137
5.262
5.387
5.512
4.736
4.861
4.986
5.111
5.236
5.002
5.127
5.252
5.377
5.502
4.752
4.877
5.002
5.127
5.252
253
254
255
256
257
5.359
5.484
5.609
5.734
5.859
.035
.035
.035
.035
.035
5.637
5.762
5.887
6.012
6.137
5.361
5.486
5.611
5.736
5.861
5.627
5.752
5.877
6.002
6.127
5.377
5.502
5.627
5.752
5.877
258
5.984
.035
6.262
5.986
6.252
6.002
.139
.004
G
Groove
Width
+.004
-.000
.144
For pressures over 55.2 Bar (800 PSI), consult Design Chart 5-4 and the design sections of this Handbook.
5-48
Seals
5700 Handbook
Rod O.D.
Piston O.D.
Gland Detail
0 to 5
(Typ.)
Break Corners
Approx. .005 Rad.
1/2E
.005
Typ.
16
32
16
16
R
F
Gland
Depth
I.D.
.003 Typ.
Section W-W
F Groove
Depth (Ref.)
W
Cross-Section
Nominal
Actual
L
Gland
Depth
E
Squeeze
Actual
%
Diametral
Clearance
G
Groove
Width
R
Groove
Radius
Max.*
Eccentricity
006
through
012
1/16
.070
.003
.055
to
.057
.010
to
.018
15
to
25
.002
to
.005
.093
to
.098
.005
to
.015
.002
104
through
116
3/32
.103
.003
.088
to
.090
.010
to
.018
10
to
17
.002
to
.005
.140
to
.145
.005
to
.015
.002
201
through
222
1/8
.139
.004
.121
to
.123
.012
to
.022
9
to
16
.003
to
.006
.187
to
.192
.010
to
.025
.003
309
through
349
3/16
.210
.005
.185
to
.188
.017
to
.030
8
to
14
.003
to
.006
.281
to
.286
.020
to
.035
.004
425
through
460
1/4
.275
.006
.237
to
.240
.029
to
.044
11
to
16
.004
to
.007
.375
to
.380
.020
to
.035
.005
Design Chart 5-5: Design Chart for Reciprocating Vacuum Packing Glands
5-49
Seals
Back-Up Rings
5700 Handbook
Section VI
Back-Up Rings
6.1 Introduction ............................................................................................................................................. 6-2
6.2 Anti-Extrusion Device Design Hints ...................................................................................................... 6-2
6.3 Parbak Elastomer Back-Up Rings ......................................................................................................... 6-2
6.4 Other Back-Up Ring Materials ............................................................................................................... 6-3
6.4.1 Polytetrafluoroethylene (PTFE) Back-Up Rings .......................................................................... 6-3
6.4.2 Metal Non-Extrusion Rings........................................................................................................... 6-3
6.4.3 Leather Back-Up Rings ................................................................................................................. 6-3
6.5 Parbak Compound Information ............................................................................................................... 6-3
6.6 Parker Parbak 8-Series Dimensions ........................................................................................................ 6-3
6-1
Seals
Back-Up Rings
5700 Handbook
Back-Up Rings
Parbaks are quick and easy to assemble, minimizing assembly costs, and they cannot fall out of the O-ring groove.
Besides their advantages as antiextrusion devices, Parbak
rings help trap lubricant, preserving the O-ring.
The standard sizes are listed in Table 6-1. Refer to the
appropriate Design Chart for recommended groove width.
Special sizes are also made to order.
6.1 Introduction
1.
2.
3.
4.
5.
6-2
Seals
Back-Up Rings
5700 Handbook
Developed primarily for service in petroleum base hydraulic fluids, at -40C to 121C (-40F to 250F), Parkers
standard Parbak compound N0300-90 provides the maximum benefits in back-up ring service. Compounds for use
in other fluids and for temperatures up to 204C (400F) are
available on request.
Parbaks will stretch up to 50%, and are quickly and easily
installed. Advantages of the contour design are obtained
regardless of how Parbaks are installed. They may be
installed with the concave face in either direction, toward
or away from the O-ring.
7 to 10
Scarf Cut
Spiral
Parbak
Seals
Back-Up Rings
5700 Handbook
I.D.
R
.010 R. Max.
Section W-W
Developed primarily for service in petroleum base hydraulic fluids, at 4C to 121C (-40F to 250F), Parker's
standard Parbak compound N0300-90, provides the maximum benefits in back-up ring service. Compounds for use
in other fluids and for temperatures up to 204C (400F) are
available on request.
Dash I.D.
No. (in.)
004
005
006
007
008
.096
.127
.140
.171
.202
009
010
011
012
013
.234
.265
.327
.390
.455
014
015
016
017
018
.518
.580
.643
.705
.768
019
020
021
022
023
.830
.893
.955
1.018
1.080
024
025
026
027
028
Tol.
R
T
A
.087
.049
.045
Tol.
W
(in.)
.003
.053
Tol.
.003
Dash I.D.
No. (in.)
Tol.
R
T
A
041
042
043
044
045
3.018
3.268
3.518
3.768
4.018
.240
.024
.024
.027
.027
046
047
048
049
050
4.268
4.518
4.768
5.018
5.268
102
103
104
105
106
.077
.109
.140
.171
.202
.009
.010
.010
107
108
109
110
111
.234
.265
.327
.390
.452
1.143
1.205
1.268
1.330
1.393
.010
.011
.011
.011
.013
112
113
114
115
116
.515
.577
.640
.702
.765
.005
.007
.009
.009
.009
029
030
031
032
033
1.518
1.643
1.768
1.893
2.018
.013
.013
.015
.015
.018
117
118
119
120
121
.831
.893
.956
1.018
1.081
.100
034
035
036
037
038
2.143
2.268
2.393
2.518
2.643
1.143
1.206
1.268
1.331
1.393
.010
.012
.018
.200
122
123
124
125
126
039
040
2.768
2.893
.200
.200
127
128
1.456
1.518
.005
.007
.009
.087
.049
.045
.003
.053
.003
W
(in.)
.003
.053
.087
.049
.030
.030
.030
.037
.037
.087
.049
.053
.005
.129
.053
.086
.129
.053
.012
.045
Tol.
.045
.003
.086
Tol.
.003
.003
Notes: 1. Parbak sizes are designed to correspond with the Parker 2-xxx, 3-xxx and AS568A series O-ring with which they are used.
2. Complete call-out consists of the digit 8, the dash number for the size wanted and the rubber material.
Example: N0300-90 8-009.
Seals
Back-Up Rings
5700 Handbook
Tol.
R
T
A
.129
.053
.045
Tol.
W
(in.)
.003
.086
Tol.
129
130
131
1.581
1.643
1.706
.003
132
133
134
135
136
1.768
1.831
1.893
1.956
2.018
137
138
139
140
141
2.081
2.143
2.206
2.268
2.331
142
143
144
145
146
2.393
2.456
2.518
2.581
2.643
147
148
149
150
151
2.706
2.768
2.831
2.893
3.018
.022
152
153
154
155
156
3.268
3.518
3.768
4.018
4.268
.024
.024
.028
.028
.030
157
158
159
160
161
4.518
4.768
5.018
5.268
5.518
.030
.030
.035
162
163
164
165
166
5.768
6.018
6.268
6.518
6.768
167
168
169
170
171
7.018
7.268
7.518
7.768
8.018
.040
.045
172
173
174
175
176
8.268
8.518
8.768
9.018
9.268
.050
177
178
9.518
9.768
.055
.055
.129
.053
.045
.086
.003
201
202
203
204
205
.202
.265
.327
.390
.455
.005
.174
.050
.040
.118
.004
.015
.015
.017
.017
.017
.017
.020
.020
.022
.024
.035
.040
.045
.050
.055
.005
.174
.050
.040
.003
.118
.004
Dash I.D.
No. (in.)
Tol.
R
T
A
206
207
208
209
210
.518
.580
.643
.705
.766
.005
.007
.009
.009
.010
211
212
213
214
215
.828
.891
.953
1.016
1.078
.010
.010
216
217
218
219
220
1.141
1.203
1.266
1.334
1.397
.012
221
222
223
224
225
1.459
1.522
1.647
1.772
1.897
.012
.015
.015
.015
.018
226
227
228
229
230
2.022
2.147
2.272
2.397
2.522
.018
.018
.020
.020
.020
231
232
233
234
235
2.631
2.756
2.881
3.006
3.131
.020
.024
236
237
238
239
240
3.256
3.381
3.506
3.631
3.756
241
242
243
244
245
3.881
4.006
4.131
4.256
4.381
246
247
248
249
250
4.506
4.631
4.768
4.893
5.018
251
252
253
254
255
5.143
5.268
5.393
5.518
5.643
256
257
258
259
260
5.768
5.893
6.018
6.268
6.518
.035
.040
.040
261
6.768
.040
Tol.
W
(in.)
Tol.
.174
.050
.040
.003
.118
.004
.174
.050
.040
.003
.118
.004
.024
.028
.028
.030
.030
.035
Notes: 1. Parbak sizes are designed to correspond with the Parker 2-xxx, 3-xxx and AS568A series O-ring with which they are used.
2. Complete call-out consists of the digit 8, the dash number for the size wanted and the rubber material.
Example: N0300-90 8-009.
Seals
Back-Up Rings
5700 Handbook
Tol.
R
T
A
Tol.
W
(in.)
.003
.118
Tol.
Dash I.D.
No. (in.)
Tol.
R
T
A
341
342
343
344
345
3.523
3.648
3.773
3.898
4.028
.024
.028
4.153
4.278
4.403
4.528
4.653
.028
.030
.050
.055
346
347
348
349
350
.055
.055
.055
.055
.065
351
352
353
354
355
4.778
4.903
5.028
5.153
5.278
11.518
12.018
13.018
14.018
15.018
5.403
5.528
5.653
5.778
5.903
.037
.065
356
357
358
359
360
282 15.989
283 16.989
284 17.989
.075
.080
.085
.450
.513
.575
.638
.700
.005
.005
.007
.009
.009
6.028
6.278
6.528
6.778
7.028
.037
.040
309
310
311
312
313
361
362
363
364
365
.763
.825
.888
.950
1.013
.010
7.278
7.528
7.778
8.028
8.278
.045
314
315
316
317
318
366
367
368
369
370
319
320
321
322
323
1.075
1.138
1.200
1.263
1.316
.010
.012
.012
.012
.012
371
372
373
374
375
8.528
8.778
9.028
9.278
9.528
324
325
326
327
328
1.388
1.513
1.638
1.763
1.888
.012
.015
376
377
378
379
380
9.778
10.028
10.528
11.028
11.528
.055
.060
.060
.065
329
330
331
332
333
2.013
2.138
2.268
2.393
2.518
.018
381
382
383
384
385
12.028
13.028
14.028
15.028
16.008
.065
.065
.070
.070
.075
334
335
336
337
338
2.643
2.768
2.893
3.018
3.143
.020
.020
.020
.024
386
387
388
389
390
17.008
18.008
19.006
20.006
21.006
.080
.085
.090
.095
.095
339
340
3.273
3.398
391
392
393
394
395
22.006
22.993
23.993
24.993
25.993
.100
.105
.110
.115
.120
262
263
264
265
266
7.018
7.268
7.518
7.768
8.018
.040
.045
267
268
269
270
271
8.268
8.518
8.768
9.018
9.268
.050
272 9.518
273 9.768
274 10.018
275 10.518
276 11.018
277
278
279
280
281
.174
.050
.040
.004
.045
.174
.050
.040
.003
.118
.004
.262
.076
.060
.004
.183
.005
.015
.018
.020
.024
.262
.076
.060
.004
.183
.005
Tol.
W
(in.)
Tol.
.262
.076
.060
.004
.183
.005
.262
.076
.060
.004
.183
.005
.030
.037
.037
.037
.040
.045
.050
.050
.055
Notes: 1. Parbak sizes are designed to correspond with the Parker 2-xxx, 3-xxx and AS568A series O-ring with which they are used.
2. Complete call-out consists of the digit 8, the dash number for the size wanted and the rubber material.
Example: N0300-90 8-009.
Seals
Back-Up Rings
5700 Handbook
4.551
4.676
4.801
4.926
5.051
430
431
432
433
434
Tol.
R
T
A
.344
.117
.096
Tol.
W
(in.)
Tol.
.005
.236
.006
Dash I.D.
No. (in.)
Tol.
R
T
A
451
452
453
454
455
11.024
11.524
12.024
12.524
13.024
5.176
5.301
5.426
5.551
5.676
456
457
458
459
460
13.524
14.024
14.524
15.024
15.524
.070
435
436
437
438
439
5.801
5.926
6.051
6.274
6.524
461
462
463
464
465
16.004
16.504
17.004
17.504
18.004
.075
.075
.080
.085
.085
440
441
442
443
444
6.774
7.024
7.274
7.524
7.774
466
467
468
469
470
18.504
19.004
19.504
20.004
21.004
.085
.090
.090
.095
.095
471
472
473
474
475
22.004
23.004
24.004
25.004
26.004
.100
.105
.110
.115
.120
.033
.037
.037
.040
.040
.045
445 8.024
446 8.524
447 9.024
448 9.524
449 10.024
.045
.055
450 10.524
.060
.055
.344
.117
.096
.005
.236
.060
Tol.
W
(in.)
Tol.
.344
.117
.096
.005
.236
.006
.344
.117
.096
.005
.236
.006
.060
.070
.006
Notes: 1. Parbak sizes are designed to correspond with the Parker 2-xxx, 3-xxx and AS568A series O-ring with which they are used.
2. Complete call-out consists of the digit 8, the dash number for the size wanted and the rubber material.
Example: N0300-90 8-009.
6-7
Seals
Back-Up Rings
5700 Handbook
Parker
N0300-90
Parker
Parbak
Size No.*1
8-004
8-005
8-006
8-007
8-008
8-009
8-010
8-011
8-012
8-013
MS275951
MS287742
Dash No.
AN6246-1
AN6246-2
AN6246-3
-004
-005
-006
-007
-008
AN6246-4
AN6246-5
AN6246-6
AN6246-7
-009
-010
-011
-012
-013
MS287823
MS287833
MS358031
Dash No.
MS28782-1
MS28782-2
MS28782-3
-6
-7
-8
MS28782-4
MS28782-5
MS28782-6
MS28782-7
-9
-10
-11
-12
Parker
Parbak
Size No.*1
AN62441
AN62461
8-130
8-131
8-132
8-133
8-134
-130
-131
-132
-133
-134
8-135
8-136
8-137
8-138
8-139
-135
-136
-137
-138
-139
MS287823
MS287833
MS358031
Dash No.
8-014
8-015
8-016
8-017
8-018
-014
-015
-016
-017
-018
8-140
8-141
8-142
8-143
8-144
-140
-141
-142
-143
-144
8-019
8-020
8-021
8-022
8-023
-019
-020
-021
-022
-023
8-145
8-146
8-147
8-148
8-149
-145
-146
-147
-148
-149
8-024
8-025
8-026
8-027
8-028
-024
-025
-026
-027
-028
8-210
8-211
8-212
8-213
8-214
AN6246-15
AN6246-16
AN6246-17
AN6246-18
AN6246-19
-210
-211
-212
-213
-214
MS28782-15
MS28782-16
MS28782-17
MS28782-18
MS28782-19
-210
-211
-212
-213
-214
8-110
8-111
8-112
8-113
8-114
AN6246-8
AN6246-9
AN6246-10
AN6246-11
AN6246-12
-110
-111
-112
-113
-114
MS28782-8
MS28782-9
MS28782-10
MS28782-11
MS28782-12
-110
-111
-112
-113
-114
8-215
8-216
8-217
8-218
8-219
AN6246-20
AN6246-21
AN6246-22
AN6246-23
AN6246-24
-215
-216
-217
-218
-219
MS28782-20
MS28782-21
MS28782-22
MS28782-23
MS28782-24
-215
-216
-217
-218
-219
8-115
8-116
8-117
8-118
8-119
AN6246-13
AN6246-14
-115
-116
-117
-118
-119
MS28782-13
MS28782-14
-115
-116
8-220
8-221
8-222
8-223
8-224
AN6246-25
AN6246-26
AN6246-27
AN6244-1
AN6244-2
-220
-221
-222
-223
-224
MS28782-25
MS28782-26
MS28782-27
MS28783-1
MS28783-2
-220
-221
-222
-223
-224
8-120
8-121
8-122
8-123
8-124
-120
-121
-122
-123
-124
8-225
8-226
8-227
8-228
8-229
AN6244-3
AN6244-4
AN6244-5
AN6244-6
AN6244-7
-225
-226
-227
-228
-229
MS28783-3
MS28783-4
MS28783-5
MS28783-6
MS28783-7
-225
-226
-227
-228
-229
8-125
8-126
8-127
8-128
8-129
-125
-126
-127
-128
-129
8-230
8-231
8-232
8-233
8-234
AN6244-8
AN6244-9
AN6244-10
AN6244-11
AN6244-12
-230
-231
-232
-233
-234
MS28783-8
MS28783-9
MS28783-10
MS28783-11
MS28783-12
-230
-231
-232
-233
-234
*Add Parker compound number N0300-90 to complete the call out. Example: N0300-90 8-009.
Note: These corresponding part numbers do not have identical dimensions, but they are intended for use with O-rings of the same
dimensions. Parbak sizes with no corresponding military part number are not shown.
1. Continuous back-up ring.
2. Single turn, scarf cut.
3. Double turn.
Seals
Back-Up Rings
5700 Handbook
Parker
MIL-R-5521 MIL-R-8791 MIL-R-8791 MIL-R-5521
N0300-90
Leather
PTFE
PTFE
Leather
Parker
Parbak
Size No.*1
AN62441
AN62461
MS275951
MS287742
Dash No.
MS287823
MS287833
MS358031
Dash No.
Parker
Parbak
Size No.*1
AN62441
AN62461
MS275951
MS287742
Dash No.
MS287823
MS287833
MS358031
Dash No.
8-235
8-236
8-237
8-238
8-239
AN6244-13
AN6244-14
AN6244-15
AN6244-16
AN6244-17
-235
-236
-237
-238
-239
MS28783-13
MS28783-14
MS28783-15
MS28783-16
MS28783-17
-235
-236
-237
-238
-239
8-336
8-337
8-338
8-339
8-340
AN6246-39
AN6246-40
AN6246-41
AN6246-42
AN6246-43
-336
-337
-338
-339
-340
MS28782-39
MS28782-40
MS28782-41
MS28782-42
MS28782-43
-336
-337
-338
-339
-340
8-240
8-241
8-242
8-243
8-244
AN6244-18
AN6244-19
AN6244-20
AN6244-21
AN6244-22
-240
-241
-242
-243
-244
MS28783-18
MS28783-19
MS28783-20
MS28783-21
MS28783-22
-240
-241
-242
-243
-244
8-341
8-342
8-343
8-344
8-345
AN6246-44
AN6246-45
AN6246-46
AN6246-47
AN6246-48
-341
-342
-343
-344
-345
MS28782-44
MS28782-45
MS28782-46
MS28782-47
MS28782-48
-341
-342
-343
-344
-345
8-245
8-246
8-247
8-248
8-249
AN6244-23
AN6244-24
AN6244-25
AN6244-26
AN6244-27
-245
-246
-247
MS28783-23
MS28783-24
MS28783-25
-245
-246
-247
8-346
8-347
8-348
8-349
8-425
AN6246-49
AN6246-50
AN6246-51
AN6246-52
AN6246-88
-346
-347
-348
-349
-425
MS28782-49
MS28782-50
MS28782-51
MS28782-52
MS28782-88
-346
-347
-348
-349
-425
8-250
8-251
8-252
8-253
8-254
AN6244-28
AN6244-29
AN6244-30
AN6244-31
AN6244-32
8-426
8-427
8-428
8-429
8-430
AN6246-53
AN6246-54
AN6246-55
AN6246-56
AN6246-57
-426
-427
-428
-429
-430
MS28782-53
MS28782-54
MS28782-55
MS28782-56
MS28782-57
-426
-427
-428
-429
-430
8-255
8-256
8-257
8-258
8-259
AN6244-33
AN6244-34
AN6244-35
AN6244-36
AN6244-37
8-431
8-432
8-433
8-434
8-435
AN6246-58
AN6246-59
AN6246-60
AN6246-61
AN6246-62
-431
-432
-433
-434
-435
MS28782-58
MS28782-59
MS28782-60
MS28782-61
MS28782-62
-431
-432
-433
-434
-435
8-260
8-261
8-262
8-263
8-264
AN6244-38
AN6244-39
AN6244-40
AN6244-41
AN6244-42
8-436
8-437
8-438
8-439
8-440
AN6246-63
AN6246-64
AN6246-65
AN6246-66
AN6246-67
-436
-437
-438
-439
-440
MS28782-63
MS28782-64
MS28782-65
MS28782-66
MS28782-67
-436
-437
-438
-439
-440
8-265
8-266
8-267
8-268
8-269
AN6244-43
AN6244-44
AN6244-45
AN6244-46
AN6244-47
8-441
8-442
8-443
8-444
8-445
AN6246-68
AN6246-69
AN6246-70
AN6246-71
AN6246-72
-441
-442
-443
-444
-445
MS28782-68
MS28782-69
MS28782-70
MS28782-71
MS28782-72
-441
-442
-443
-444
-445
8-270
8-271
8-272
8-273
8-274
AN6244-48
AN6244-49
AN6244-50
AN6244-51
AN6244-52
8-446
8-447
8-448
8-449
8-450
AN6246-73
AN6246-74
AN6246-75
AN6246-76
AN6246-77
-446
-447
-448
-449
-450
MS28782-73
MS28782-74
MS28782-75
MS28782-76
MS28782-77
-446
-447
-448
-449
-450
8-325
8-326
8-327
8-328
8-329
AN6246-28
AN6246-29
AN6246-30
AN6246-31
AN6246-32
-325
-326
-327
-328
-329
MS28782-28
MS28782-29
MS28782-30
MS28782-31
MS28782-32
-325
-326
-327
-328
-329
8-451
8-452
8-453
8-454
8-455
AN6246-78
AN6246-79
AN6246-80
AN6246-81
AN6246-82
-451
-452
-453
-454
-455
MS28782-78
MS28782-79
MS28782-80
MS28782-81
MS28782-82
-451
-452
-453
-454
-455
8-330
8-331
8-332
8-333
8-334
AN6246-33
AN6246-34
AN6246-35
AN6246-36
AN6246-37
-330
-331
-332
-333
-334
MS28782-33
MS28782-34
MS28782-35
MS28782-36
MS28782-37
-330
-331
-332
-333
-334
8-456
8-457
8-458
8-459
8-460
AN6246-83
AN6246-84
AN6246-85
AN6246-86
AN6246-87
-456
-457
-458
-459
-460
MS28782-83
MS28782-84
MS28782-85
MS28782-86
MS28782-87
-456
-457
-458
-459
-460
8-335
AN6246-38
-335
MS28782-38
-335
*Add Parker compound number N0300-90 to complete the call out. Example: N0300-90 8-009.
Note: These corresponding part numbers do not have identical dimensions, but they are intended for use with O-rings of the same
dimensions. Parbak sizes with no corresponding military part number are not shown.
1. Continuous back-up ring.
2. Single turn, scarf cut.
3. Double turn.
Seals
Back-Up Rings
5700 Handbook
Continuous ring.
Continuous ring.
No information available.
Uniform dimensions.
Uniform dimensions.
Variable dimensions.
6-10
Seals
5700 Handbook
Section VII
Compatibility Tables for Gases, Fluids, Solids
Fluid Compatibility Table ............................................................................................................................. 7-2
7-1
Seals
5700 Handbook
Fluorocarbon FKM
Hifluor FKM
Perfluoroelastomer FFKM
Neoprene/Chloroprene CR
Styrene-Butadiene SBR
Polyacrylate ACM
Polyurethane AU, EU
Butyl IIR
Butadiene BR
Isoprene IR
Natural Rubber NR
Hypalon CSM
Fluorosilicone FVMQ
X
3
1
3
X
2
2
4
3
3
4
3
3
2
4
2
4
4
4
1
4
4
2
X
X
X
X
3
2
4
1
1
1
2
2
1
4
4
3
X
3
1
3
X
2
2
4
4
3
4
3
X
2
4
2
4
4
4
1
4
4
2
X
X
X
X
3
2
4
1
1
1
2
2
1
4
4
3
X
2
1
1
1
1
1
3
2
1
1
1
1
4
1
4
1
1
4
1
1
1
4
X
X
X
X
1
4
4
2
4
4
4
4
4
1
1
1
X
4
3
3
X
1
2
4
4
3
4
3
1
1
4
1
4
1
1
1
1
1
1
X
X
X
X
3
1
3
X
1
1
1
1
1
4
4
4
1
1
1
1
1
1
1
2
1
1
2
1
1
1
2
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
3
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
X
3
2
X
X
1
3
3
2
X
2
X
1
X
2
X
2
2
2
1
1
1
X
X
X
X
X
X
X
3
2
2
2
2
2
2
2
2
2
X
3
1
1
X
1
4
4
2
1
4
1
X
4
4
4
4
4
4
2
2
2
4
X
X
X
X
1
4
4
X
1
2
4
2
2
4
4
4
X
3
4
1
X
2
2
4
2
1
4
1
X
4
4
4
4
4
4
2
4
4
4
X
X
X
X
1
4
3
X
2
4
4
4
4
4
4
4
X
4
4
4
X
4
4
4
4
4
4
4
X
4
4
4
4
4
4
4
X
X
4
X
X
X
X
4
4
4
X
1
1
2
1
1
4
4
X
X
4
4
4
X
4
4
4
4
4
4
4
X
3
4
3
4
4
4
4
4
4
3
X
X
X
X
4
3
4
X
1
1
4
1
1
4
4
4
X
2
2
1
X
1
2
4
2
1
1
1
X
4
2
4
1
1
4
1
1
1
4
X
X
X
X
1
4
4
X
4
4
4
4
4
2
2
1
X
2
4
1
X
2
2
4
2
1
4
1
X
4
4
4
4
4
4
2
X
X
4
X
X
X
X
1
4
X
X
4
4
4
4
4
4
4
4
X
2
4
1
X
2
2
4
2
1
4
1
X
4
4
4
4
4
4
2
X
X
4
X
X
X
X
1
4
3
X
4
4
4
4
4
4
4
4
X
2
4
1
X
2
2
4
2
1
4
1
X
4
4
4
4
4
4
2
X
X
4
X
X
X
X
1
4
3
X
4
4
4
4
4
4
4
4
X
3
2
1
X
1
3
3
2
1
3
1
X
4
4
4
4
4
4
2
X
X
4
X
X
X
X
1
4
3
X
1
1
4
1
1
4
4
4
X
4
1
1
X
2
2
4
4
1
4
1
X
2
4
2
4
4
1
X
X
X
2
X
X
X
X
1
2
4
X
1
1
2
1
1
3
3
4
X
2
2
2
X
1
1
3
2
2
4
2
X
X
4
X
4
4
4
2
X
X
X
X
X
X
X
2
X
4
X
2
2
4
2
2
3
3
4
V3819-75
E0540-80
C0873-70
E0540-80
E0540-80
E0540-80
E0540-80
V8545-75
C0873-70
E0540-80
E0540-80
E0540-80
E0540-80
V1164-75
E0540-80
V1164-75
E0540-80
V1164-75
V1164-75
E0540-80
V1164-75
V1164-75
V1164-75
V3819-75
V3819-75
V3819-75
V3819-75
E0540-80
V1164-75
V8545-75
E0540-80
N0674-70
N0674-70
V1164-75
N0674-70
N0674-70
E0540-80
E0540-80
E0540-80
7-2
Seals
AFLAS
Neoprene
Polyacrylate
Polyurethane
Butyl
Fluorosilicone
Silicone
Nitrile NBR
5700 Handbook
Fluorocarbon FKM
Hifluor FKM
Perfluoroelastomer FFKM
Neoprene/Chloroprene CR
Styrene-Butadiene SBR
Polyacrylate ACM
Polyurethane AU, EU
Butyl IIR
Butadiene BR
Isoprene IR
Natural Rubber NR
Hypalon CSM
Fluorosilicone FVMQ
2
3
4
4
2
1
1
4
2
3
1
1
1
1
2
2
2
1
2
3
3
2
1
3
1
X
1
X
3
2
1
1
3
1
3
1
3
1
1
1
2
3
4
4
2
1
1
4
2
3
1
1
1
1
2
2
2
1
2
3
3
2
1
3
1
X
1
X
3
X
1
1
3
1
3
1
3
1
1
1
1
2
4
4
4
4
4
4
4
1
4
4
4
4
4
4
4
4
4
1
1
1
1
1
1
X
1
X
1
1
4
1
1
1
1
1
1
1
1
4
1
1
1
3
1
1
1
2
1
3
1
1
1
1
1
1
1
1
1
3
3
4
1
3
1
X
1
X
3
2
1
1
3
1
3
1
3
1
4
1
1
1
1
2
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
3
X
X
X
2
X
X
X
X
X
X
X
X
X
X
X
X
X
2
1
X
1
X
1
X
X
1
X
1
X
1
X
1
X
1
2
2
1
2
4
4
4
2
2
4
4
1
2
2
2
2
4
4
4
2
1
1
1
2
1
1
1
X
1
X
1
X
2
1
1
1
1
1
1
1
1
2
2
4
4
4
4
4
4
4
4
1
4
4
4
4
4
4
4
4
X
1
1
2
1
1
1
X
1
X
1
X
4
1
1
X
1
1
1
2
1
4
1
2
4
4
4
1
1
4
4
4
1
1
1
1
4
4
4
1
X
4
4
4
1
4
1
X
X
X
4
X
1
X
4
X
4
1
4
4
4
1
2
3
4
4
3
1
1
4
3
4
1
1
1
1
3
3
3
1
X
4
4
4
3
4
3
X
3
X
4
X
1
3
4
X
4
3
4
4
X
2
1
2
4
4
4
4
4
4
4
1
4
4
4
4
4
4
4
4
X
1
1
1
1
1
1
X
1
X
1
X
4
1
1
X
1
1
1
1
1
4
2
4
4
4
4
4
4
4
4
1
4
4
4
4
4
4
4
4
X
1
1
4
1
1
1
X
1
X
1
X
4
1
1
X
1
1
1
1
1
4
2
4
4
4
4
4
4
4
4
1
4
4
4
4
4
4
4
4
X
1
1
1
1
1
1
X
1
X
1
X
4
1
1
X
1
1
1
1
1
4
2
4
4
4
4
4
4
4
4
1
4
4
4
4
4
4
4
4
X
1
1
1
1
1
1
X
2
X
1
X
4
1
1
X
1
1
1
1
1
4
1
2
4
4
4
2
2
4
4
1
2
2
2
2
4
4
4
2
X
1
1
4
1
1
1
X
1
X
1
X
2
1
1
X
1
1
1
1
1
3
1
1
2
4
2
1
1
2
2
1
1
1
1
1
2
2
2
1
X
1
1
4
1
1
1
X
1
X
1
X
1
X
1
X
1
1
1
1
4
3
1
1
1
2
X
2
2
4
X
2
2
2
2
2
X
X
X
2
X
2
2
4
1
2
2
X
2
X
2
2
2
2
2
2
2
1
2
1
1
4
E0540-80
S0604-70
S0604-70
S0455-70
V1164-75
N0674-70
N0674-70
V1164-75
V1164-75
E0540-80
N0674-70
N0674-70
N0674-70
N0674-70
V1164-75
V1164-75
V1164-75
N0674-70
V1164-75
E0540-80
E0540-80
E0540-80
N0674-70
E0540-80
N0674-70
V3819-75
N0674-70
V3819-75
E0540-80
E0540-80
N0674-70
N0674-70
E0540-80
E0540-80
E0540-80
N0674-70
E0540-80
N0674-70
N0674-70
N0674-70
7-3
Seals
AFLAS
Neoprene
Polyacrylate
Polyurethane
Butyl
Fluorosilicone
Silicone
Nitrile NBR
5700 Handbook
Fluorocarbon FKM
Hifluor FKM
Perfluoroelastomer FFKM
Neoprene/Chloroprene CR
Styrene-Butadiene SBR
Polyacrylate ACM
Polyurethane AU, EU
Butyl IIR
Butadiene BR
Isoprene IR
Natural Rubber NR
Hypalon CSM
Fluorosilicone FVMQ
1
4
X
X
X
X
X
X
2
2
1
4
2
3
3
3
3
3
1
3
4
1
3
3
3
1
X
3
1
4
1
3
3
3
1
1
3
3
X
4
1
4
X
X
X
X
X
X
2
2
1
4
2
3
3
3
3
3
1
3
4
1
3
3
3
1
X
3
1
4
1
3
3
3
1
1
3
3
X
4
3
2
X
X
X
X
X
X
1
2
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
X
1
1
1
1
1
1
1
1
1
1
1
X
1
1
4
X
X
X
X
X
X
4
4
4
4
4
3
3
3
3
3
1
3
1
1
3
3
3
1
X
3
3
4
1
3
3
3
X
X
3
3
X
X
1
3
1
1
1
1
1
1
3
4
2
3
3
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
3
1
1
1
1
X
1
1
1
1
X
1
2
1
1
1
1
1
1
2
4
1
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
1
1
1
1
X
1
1
1
1
X
2
3
X
X
X
X
X
X
2
3
2
2
2
X
X
X
X
X
1
X
1
1
X
X
X
1
X
X
2
2
1
X
X
X
2
2
X
X
X
2
2
2
X
X
X
X
X
X
1
X
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
X
1
1
1
1
1
1
1
1
1
1
1
X
1
4
2
X
X
X
X
X
X
4
4
1
4
4
1
1
1
1
1
1
1
1
1
1
1
1
1
X
1
2
3
1
1
1
1
1
1
1
1
X
4
1
4
X
X
X
X
X
X
4
4
4
4
4
4
4
4
4
4
X
4
4
X
4
4
4
X
X
4
4
4
X
4
4
4
2
X
4
4
X
4
1
4
X
X
X
X
X
X
4
4
X
X
4
4
4
4
4
4
1
4
4
1
4
4
4
1
X
4
4
4
1
4
4
4
X
X
4
4
X
4
3
2
X
X
X
X
X
X
1
2
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
X
1
1
1
1
1
1
1
1
1
1
1
X
1
4
2
X
X
X
X
X
X
4
4
1
4
4
1
1
1
1
1
X
1
X
X
1
1
1
X
X
1
2
3
X
1
1
1
X
1
1
1
X
X
4
2
X
X
X
X
X
X
4
4
1
4
4
1
1
1
1
1
X
1
X
X
1
1
1
X
X
1
2
3
X
1
1
1
X
1
1
1
X
1
4
2
X
X
X
X
X
X
4
4
1
4
4
1
1
1
1
1
1
1
1
1
1
1
1
1
X
1
2
3
1
1
1
1
3
1
1
1
X
1
2
4
X
X
X
X
X
X
4
4
1
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
X
1
1
1
1
1
1
1
1
1
1
1
X
X
1
4
X
X
X
X
X
X
4
4
4
4
4
1
1
1
1
1
X
1
X
X
1
1
1
X
X
1
1
1
X
1
1
1
X
X
1
1
X
X
2
2
X
X
X
X
X
X
2
4
1
X
2
2
2
2
2
2
X
2
X
X
2
2
2
X
X
2
1
1
X
2
2
2
X
2
2
2
X
X
N0674-70
C0873-70
V3819-75
V3819-75
V3819-75
V3819-75
V3819-75
V3819-75
C0873-70
E0540-80
C0873-70
C0873-70
C0873-70
E0540-80
E0540-80
E0540-80
E0540-80
E0540-80
N0674-70
E0540-80
C0873-70
N0674-70
E0540-80
E0540-80
E0540-80
N0674-70
V3819-75
E0540-80
E0540-80
E0540-80
N0674-70
E0540-80
E0540-80
E0540-80
N0674-70
N0674-70
E0540-80
E0540-80
V3819-75
E0540-80
7-4
Seals
AFLAS
Neoprene
Polyacrylate
Polyurethane
Butyl
Fluorosilicone
Silicone
Nitrile NBR
5700 Handbook
Fluorocarbon FKM
Hifluor FKM
Perfluoroelastomer FFKM
Neoprene/Chloroprene CR
Styrene-Butadiene SBR
Polyacrylate ACM
Polyurethane AU, EU
Butyl IIR
Butadiene BR
Isoprene IR
Natural Rubber NR
Hypalon CSM
Fluorosilicone FVMQ
4
1
1
1
1
3
3
3
3
1
3
1
1
1
3
3
3
3
3
3
1
2
1
1
X
4
2
2
2
4
3
3
X
1
2
2
2
2
2
4
4
1
1
1
1
3
3
3
3
1
3
1
1
1
3
3
3
3
3
3
1
2
1
1
X
4
2
2
2
4
3
3
X
1
2
2
2
2
2
4
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
3
1
4
4
4
4
4
4
4
4
1
1
X
4
4
4
4
4
1
2
X
4
X
X
X
3
3
3
3
3
3
4
4
4
3
3
3
3
3
3
4
2
1
1
1
1
1
1
1
1
3
3
X
1
1
1
1
1
1
3
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
2
2
2
X
X
X
X
2
X
2
2
2
X
X
X
X
X
X
3
1
2
X
2
2
X
X
X
2
X
X
X
X
2
2
2
2
1
2
X
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
4
2
1
2
4
4
4
4
4
4
1
1
X
2
4
4
4
4
2
4
4
1
1
1
1
1
1
1
1
1
1
2
2
2
1
1
1
1
1
1
4
2
4
4
4
4
4
4
4
4
1
1
X
4
4
4
4
4
2
4
4
X
X
X
X
4
4
4
4
3
4
4
4
4
4
4
4
4
4
4
4
4
X
1
4
4
4
4
4
2
4
4
X
1
2
2
2
2
4
4
4
X
X
X
X
4
4
4
4
X
4
X
X
X
4
4
4
4
4
4
4
4
X
1
X
X
3
3
3
4
4
4
X
1
4
4
4
4
4
4
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
3
1
4
4
4
4
4
4
4
4
1
1
X
4
4
4
4
4
2
2
X
X
X
X
X
1
1
1
1
X
1
1
1
1
1
1
1
1
1
1
4
2
4
4
4
4
4
4
4
4
1
1
X
4
4
4
4
4
2
4
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
4
2
4
4
4
4
4
4
4
4
1
1
X
4
4
4
4
4
2
4
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
4
2
4
4
4
4
4
4
4
4
1
1
X
4
4
4
4
4
2
4
X
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
4
2
1
2
4
4
4
4
4
4
1
1
X
2
4
4
4
4
2
4
X
X
X
X
X
1
1
1
1
3
1
X
X
X
1
1
1
1
1
1
4
1
X
1
2
2
2
2
2
1
1
1
X
1
2
2
2
2
2
3
X
1
1
1
1
2
2
2
2
1
2
X
X
X
2
2
2
2
2
2
4
4
X
2
4
4
X
X
X
4
2
2
X
2
4
4
4
2
2
4
E0540-80
N0674-70
N0674-70
N0674-70
N0674-70
E0540-80
E0540-80
E0540-80
E0540-80
N0674-70
E0540-80
N0674-70
N0674-70
N0674-70
E0540-80
E0540-80
E0540-80
E0540-80
E0540-80
E0540-80
N0674-70
E0540-80
N0674-70
N0674-70
V1164-75
V1164-75
V1164-75
V1164-75
V1164-75
V1164-75
E0540-80
E0540-80
V3819-75
N0674-70
V1164-75
V1164-75
V1164-75
V1164-75
E0540-80
E0540-80
7-5
Seals
AFLAS
Neoprene
Polyacrylate
Polyurethane
Butyl
Fluorosilicone
Silicone
Nitrile NBR
5700 Handbook
Fluorocarbon FKM
Hifluor FKM
Perfluoroelastomer FFKM
Neoprene/Chloroprene CR
Styrene-Butadiene SBR
Polyacrylate ACM
Polyurethane AU, EU
Butyl IIR
Butadiene BR
Isoprene IR
Natural Rubber NR
Hypalon CSM
Fluorosilicone FVMQ
4
2
4
3
3
1
1
X
X
1
1
1
3
2
X
X
3
1
1
X
X
1
1
1
1
1
4
X
1
3
4
1
2
1
X
1
1
1
X
X
4
2
4
3
3
1
1
X
X
1
1
1
3
2
X
X
3
1
1
X
X
1
1
1
1
1
3
X
1
3
4
1
2
1
X
1
1
1
X
X
2
2
2
1
1
2
2
X
X
4
4
4
3
4
X
X
1
4
4
X
X
4
4
4
4
4
3
X
1
2
2
X
4
1
X
4
4
4
X
X
2
2
3
3
3
1
1
X
X
1
1
1
4
1
X
X
3
1
1
X
X
1
1
1
1
1
2
X
1
1
1
1
1
1
X
4
4
4
X
X
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
2
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
2
X
X
1
2
X
X
1
2
1
3
X
X
X
X
1
1
X
X
1
1
1
1
1
3
X
1
1
1
1
2
1
X
X
X
X
X
X
2
4
4
1
1
2
2
X
X
2
2
2
4
4
X
X
1
2
2
X
X
2
2
2
2
2
4
X
1
4
4
1
4
1
X
1
1
1
X
X
2
3
4
1
1
X
4
X
X
4
4
4
4
4
X
X
1
4
4
X
X
4
4
4
4
4
X
X
1
4
4
1
4
1
X
X
X
X
X
X
4
4
4
4
4
X
1
X
X
1
1
1
4
4
X
X
4
1
1
X
X
1
1
1
1
2
X
X
1
4
4
4
4
3
X
X
X
X
X
X
4
4
4
4
4
X
2
X
X
1
1
1
2
3
X
X
4
1
1
X
X
1
1
1
1
2
X
X
1
4
4
4
4
3
X
X
X
X
X
X
2
2
2
1
1
X
2
X
X
4
4
4
3
4
X
X
1
4
4
X
X
4
4
4
4
4
X
X
1
2
4
1
4
1
X
X
X
X
X
X
2
4
4
1
1
X
4
X
X
4
4
4
4
4
X
X
1
4
4
X
X
4
4
4
4
4
X
X
1
4
4
1
4
1
X
X
X
X
X
X
2
2
4
1
1
X
4
X
X
4
4
4
4
4
X
X
1
4
4
X
X
4
4
4
4
4
X
X
1
4
4
1
4
1
X
X
X
X
X
X
2
2
4
1
1
X
4
X
X
4
4
4
4
4
X
X
1
4
4
X
X
4
4
4
4
4
X
X
1
4
4
1
4
2
X
X
X
X
X
X
2
4
4
1
1
X
2
X
X
2
2
2
4
4
X
X
1
2
2
X
X
2
2
2
2
2
X
X
1
4
4
1
4
1
X
X
X
X
X
X
2
2
3
1
1
X
1
X
X
1
1
1
3
2
X
X
1
1
1
X
X
1
1
1
1
1
X
X
1
2
2
1
2
1
X
X
X
X
X
X
3
3
4
2
2
X
2
X
X
2
4
4
4
X
X
X
2
4
4
X
X
4
4
4
4
4
X
X
1
2
3
1
4
1
X
X
X
X
X
X
E0540-80
E0540-80
E0540-80
E0540-80
E0540-80
N0674-70
N0674-70
V3819-75
V3819-75
N0674-70
N0674-70
N0674-70
V3819-75
V1164-75
V3819-75
V3819-75
E0540-80
N0674-70
N0674-70
V3819-75
V3819-75
N0674-70
N0674-70
N0674-70
N0674-70
N0674-70
V3819-75
V3819-75
B0612-70
V1164-75
V1164-75
V1164-75
V1164-75
E0540-80
V3819-75
N0674-70
N0674-70
N0674-70
V3819-75
V3819-75
7-6
Seals
AFLAS
Neoprene
Polyacrylate
Polyurethane
Butyl
Fluorosilicone
Silicone
Nitrile NBR
5700 Handbook
Fluorocarbon FKM
Hifluor FKM
Perfluoroelastomer FFKM
Neoprene/Chloroprene CR
Styrene-Butadiene SBR
Polyacrylate ACM
Polyurethane AU, EU
Butyl IIR
Butadiene BR
Isoprene IR
Natural Rubber NR
Hypalon CSM
Fluorosilicone FVMQ
V3819-75
E0540-80
V1164-75
E0540-80
V1164-75
N0674-70
N0674-70
N0674-70
V1164-75
V1164-75
N0674-70
N0674-70
V1164-75
V1164-75
V1164-75
N0674-70
N0674-70
V1164-75
N0304-75
V3819-75
N0674-70
E0667-70
V3819-75
V3819-75
X
3
2
3
2
1
1
1
2
1
1
1
2
2
2
1
1
1
1
X
1
3
X
X
X
3
2
3
2
1
1
1
2
1
1
1
2
2
2
1
1
1
1
X
1
3
X
X
X
1
4
1
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
X
4
1
X
X
X
3
1
3
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
X
1
4
X
X
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
X
X
2
X
2
1
1
1
1
1
1
1
1
4
1
2
1
2
2
X
2
2
X
X
X
1
4
1
2
1
2
4
4
2
2
4
4
4
4
2
2
2
2
X
2
2
X
X
X
1
4
1
4
4
4
4
4
X
4
4
4
X
4
4
X
4
4
X
4
1
X
X
X
4
4
4
2
1
1
1
2
X
2
4
4
X
2
1
X
1
1
X
1
4
X
X
X
4
4
4
2
1
2
2
4
X
1
2
4
X
4
2
X
1
1
X
2
4
X
X
X
1
4
1
4
4
4
4
4
X
4
4
4
X
4
4
X
4
4
X
4
2
X
X
X
1
4
1
4
4
4
4
4
X
4
4
4
X
4
4
X
4
4
X
4
X
X
X
X
1
4
1
4
4
4
4
4
X
4
4
4
X
4
4
X
4
4
X
4
X
X
X
X
1
4
1
4
4
4
4
4
X
4
4
4
X
4
4
X
4
2
X
4
X
X
X
X
1
4
1
2
2
4
4
4
X
2
4
4
X
4
4
X
4
4
X
3
2
X
X
X
1
2
1
2
1
1
1
2
X
1
1
2
X
2
1
X
1
4
X
X
4
X
X
X
2
4
2
4
1
4
3
4
X
4
4
4
X
4
4
X
4
4
X
4
3
X
X
V1164-75
E0540-80
E0540-80
N0674-70
N0674-70
N0674-70
N0674-70
E0540-80
N0674-70
E0540-80
E0540-80
N0674-70
N0674-70
N0674-70
N0674-70
4
3
3
1
1
1
1
3
1
3
3
1
1
1
1
4
3
3
1
1
1
1
3
1
3
3
1
1
1
1
4
1
1
1
1
1
1
1
1
1
1
1
1
1
4
1
3
3
1
1
1
1
3
1
3
3
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
X
X
1
1
1
1
X
1
X
X
1
1
1
2
4
1
1
1
1
1
1
1
1
1
1
1
1
1
2
4
1
1
1
1
1
1
1
1
1
1
1
X
2
4
4
4
4
1
1
4
1
4
4
4
4
1
X
4
1
4
4
4
1
1
4
1
4
4
4
4
1
X
1
2
4
1
1
1
1
1
1
1
1
1
1
1
X
1
4
4
1
1
1
1
1
1
1
1
1
1
1
X
2
4
4
1
1
1
1
1
1
1
1
1
1
1
X
1
4
4
1
1
1
1
1
1
1
1
1
1
1
X
1
4
4
1
1
1
1
1
1
1
1
1
1
1
X
1
4
2
1
1
1
1
1
1
1
1
1
1
1
X
1
1
4
2
2
1
1
1
1
2
1
2
2
1
X
1
4
7-7
Seals
AFLAS
Neoprene
Polyacrylate
Polyurethane
Butyl
Fluorosilicone
Silicone
Nitrile NBR
5700 Handbook
7-8
Seals
4
1
1
4
X
4
4
4
X
4
4
4
4
4
4
4
4
4
4
1
4
4
X
X
4
X
4
1
4
X
4
4
1
4
4
4
3
3
3
2
1
1
2
4
X
4
4
4
X
2
4
4
4
4
2
4
4
4
4
1
X
X
4
4
4
X
4
1
2
X
4
4
1
4
4
4
3
3
3
Fluorosilicone FVMQ
2
1
1
1
2
X
X
X
2
X
2
X
X
X
X
2
X
1
2
X
X
2
2
1
1
X
X
X
X
2
X
2
2
X
2
X
X
1
1
1
Hypalon CSM
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Natural Rubber NR
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
Isoprene IR
1
1
1
1
4
X
1
1
1
X
1
1
1
1
1
1
1
1
1
1
3
1
1
1
1
1
X
1
3
1
X
1
1
3
1
1
1
1
1
1
Butadiene BR
Neoprene/Chloroprene CR
4
1
1
1
1
X
4
4
4
X
4
4
4
4
4
4
4
1
4
4
1
2
2
1
1
X
X
4
1
2
X
4
4
1
4
4
4
1
1
1
Butyl IIR
1
1
1
1
4
X
2
2
4
X
4
2
2
2
2
1
2
4
4
2
3
X
X
4
4
X
X
2
3
4
X
4
4
3
4
2
2
1
1
1
Polyurethane AU, EU
Perfluoroelastomer FFKM
N0674-70
E1028-70
N0674-70
N0674-70
E0540-80
V8545-75
V1164-75
V1164-75
V1164-75
V3819-75
V1164-75
V1164-75
V1164-75
V1164-75
V1164-75
N0674-70
V1164-75
V1164-75
V1164-75
V1164-75
E0540-80
V1164-75
V1164-75
V1164-75
V1164-75
V1164-75
V3819-75
V1164-75
E0540-80
V1164-75
V8545-75
V1164-75
V1164-75
E0540-80
V1164-75
V1164-75
V1164-75
N0674-70
N0674-70
N0674-70
Polyacrylate ACM
Hifluor FKM
Bayol D
Beer
Beet Sugar Liquids
Beet Sugar Liquors
Benzaldehyde
Benzaldehyde Disulfonic Acid
Benzamide
Benzanthrone
Benzene
Benzene Hexachloride
Benzenesulfonic Acid 10%
Benzidine
Benzidine 3 Sulfonic Acid
Benzil
Benzilic Acid
Benzine (Ligroin)
Benzocatechol
Benzochloride
Benzoic Acid
Benzoin
Benzonitrile
Benzophenone
Benzoquinone
Benzotrichloride
Benzotrifluoride
Benzoyl Chloride
Benzoyl Peroxide
Benzoylsulfonilic Acid
Benzyl Acetate
Benzyl Alcohol
Benzyl Amine
Benzyl Benzoate
Benzyl Bromide
Benzyl Butyl Phthalate
Benzyl Chloride
Benzyl Phenol
Benzyl Salicylate
Beryllium Chloride
Beryllium Fluoride
Beryllium Oxide
Styrene-Butadiene SBR
Fluorocarbon FKM
1
1
1
1
4
X
2
2
4
X
4
2
2
2
2
1
2
4
4
2
3
X
X
4
4
X
X
2
3
4
X
4
4
3
4
2
2
1
1
1
AFLAS
Neoprene
Polyacrylate
Polyurethane
Butyl
Fluorosilicone
Silicone
Nitrile NBR
1
4
X
4
4
X
4
4
4
X
4
4
4
4
4
1
4
4
4
4
4
4
4
X
X
4
X
4
4
4
X
4
4
4
4
4
4
3
3
3
4
2
X
4
4
X
3
3
4
X
4
3
3
3
3
2
3
X
4
3
4
4
4
X
X
3
X
3
4
4
X
4
4
4
4
3
3
3
3
3
4
1
X
1
1
X
4
4
4
X
4
4
4
4
4
4
4
2
4
4
1
2
2
X
X
4
X
4
1
2
X
2
4
1
4
4
4
1
1
1
4
1
X
1
4
X
4
4
4
X
4
4
4
4
4
4
4
4
4
4
1
4
4
X
X
4
X
4
1
4
X
4
4
1
4
4
4
3
3
3
4
1
X
1
4
X
4
4
4
X
4
4
4
4
4
4
4
4
4
4
1
4
4
X
X
4
X
4
1
4
X
4
4
1
4
4
4
3
3
3
4
1
X
1
4
X
4
4
4
X
4
4
4
4
4
4
4
4
4
4
1
X
X
X
X
4
X
4
1
4
X
4
4
1
4
4
4
3
3
3
4
1
X
1
1
X
4
4
4
X
1
4
4
4
4
3
4
4
4
4
1
X
X
X
X
4
X
4
1
2
X
4
4
1
4
4
4
3
3
3
1
1
X
1
4
X
2
2
3
X
2
2
2
2
2
1
2
1
2
2
1
1
X
X
X
2
X
2
1
2
X
1
1
1
1
2
2
3
3
3
4
1
X
1
2
X
X
X
4
X
4
X
X
X
X
4
X
X
4
X
2
X
X
X
X
X
X
X
2
2
X
4
4
2
4
X
X
3
3
3
5700 Handbook
Fluorocarbon FKM
Hifluor FKM
Perfluoroelastomer FFKM
Neoprene/Chloroprene CR
Styrene-Butadiene SBR
Polyacrylate ACM
Polyurethane AU, EU
Butyl IIR
Butadiene BR
Isoprene IR
Natural Rubber NR
Hypalon CSM
Fluorosilicone FVMQ
3
3
3
3
X
2
1
4
3
X
2
X
2
1
3
2
2
2
2
2
X
X
X
X
X
X
3
2
3
2
2
2
1
1
3
2
3
4
4
4
3
3
3
3
X
X
1
4
3
X
2
X
2
1
3
2
2
2
2
2
X
X
X
X
X
X
3
2
3
2
2
2
1
1
3
2
3
4
4
4
1
1
1
1
X
1
1
4
1
1
1
1
1
1
1
4
4
4
4
4
X
X
X
X
X
X
1
4
1
4
1
1
1
3
4
4
1
4
4
4
3
3
3
3
X
1
1
1
1
1
1
1
1
1
3
1
1
1
1
1
X
X
X
X
X
X
4
1
4
1
4
4
1
1
X
2
3
1
4
4
1
1
1
1
1
4
1
1
1
1
1
1
1
1
2
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
X
1
1
1
2
2
1
1
1
1
1
3
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
X
1
1
1
2
2
X
X
X
X
X
1
1
2
1
X
1
X
1
1
X
X
X
X
X
2
X
X
X
X
X
X
2
2
2
2
2
2
X
1
3
3
X
2
3
3
1
1
1
1
X
1
3
4
2
X
4
X
2
1
1
4
4
4
4
4
X
X
X
X
X
X
2
4
2
4
2
2
X
4
4
2
1
4
4
4
1
1
1
1
X
X
3
4
3
X
2
X
2
1
1
4
4
4
4
4
X
X
X
X
X
X
1
4
X
4
2
2
X
X
4
4
1
4
4
4
4
4
4
4
X
X
3
4
4
X
2
X
4
4
4
4
4
4
4
4
X
X
X
X
X
X
X
2
4
2
3
3
X
X
X
X
4
4
4
4
4
4
4
4
X
X
3
4
4
X
1
X
4
1
4
3
3
3
3
4
X
X
X
X
X
X
4
4
4
1
3
3
X
X
X
X
4
4
4
4
1
1
1
1
X
X
1
4
1
X
1
X
1
1
1
4
4
4
4
4
X
X
X
X
X
X
2
4
2
4
1
1
X
X
4
4
1
4
4
4
1
1
1
1
X
X
3
4
2
X
2
X
2
1
1
4
4
4
4
4
X
X
X
X
X
X
X
4
2
4
1
1
X
X
X
4
1
4
4
4
1
1
1
1
X
X
3
4
2
X
2
X
2
1
1
4
4
4
4
4
X
X
X
X
X
X
X
4
2
4
1
1
X
X
X
4
1
4
4
4
1
1
1
1
X
X
3
4
3
X
2
X
2
1
1
4
4
4
4
4
X
X
X
X
X
X
X
4
2
4
1
1
X
X
X
4
1
4
4
4
1
1
1
1
X
X
3
4
1
X
4
X
1
1
1
4
4
4
4
4
X
X
X
X
X
X
2
4
2
4
1
1
X
X
4
2
1
4
4
4
1
1
1
1
X
X
3
2
2
X
2
X
2
1
1
2
2
2
2
2
X
X
X
X
X
X
4
2
2
2
4
4
X
X
X
X
1
2
4
4
2
2
2
2
X
X
3
1
2
X
2
X
2
1
2
X
X
X
X
4
X
X
X
X
X
X
3
4
2
4
4
4
X
X
4
4
2
4
4
4
E0540-80
E0540-80
E0540-80
E0540-80
V3819-75
E0540-80
N0674-70
S0604-70
E0540-80
E0540-80
E0540-80
E0540-80
E0540-80
N0674-70
E0540-80
V1164-75
V1164-75
V1164-75
V1164-75
V1164-75
V3819-75
V3819-75
V3819-75
V3819-75
V3819-75
V3819-75
E0667-70
V1164-75
E0603-70
V1164-75
E0540-80
E0540-80
N0674-70
N0674-70
V3819-75
V3819-75
E0540-80
V1164-75
Factory
Factory
7-9
Seals
AFLAS
Neoprene
Polyacrylate
Polyurethane
Butyl
Fluorosilicone
Silicone
Nitrile NBR
5700 Handbook
7-10
Seals
X
2
2
X
2
X
X
X
X
1
4
1
1
1
3
X
Fluorosilicone FVMQ
3
2
X
2
X
1
X
X
X
X
2
X
2
2
2
2
X
1
1
1
Hypalon CSM
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Natural Rubber NR
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Isoprene IR
1
1
3
1
1
1
X
X
3
X
1
1
1
1
1
1
3
1
1
1
4
1
4
1
1
1
4
3
1
X
1
3
4
3
2
1
4
3
3
3
Butadiene BR
2
4
1
4
4
4
X
X
1
X
4
X
4
4
4
4
1
2
4
1
2
1
1
2
2
2
3
1
1
X
1
1
2
1
2
4
3
1
1
1
Butyl IIR
Perfluoroelastomer FFKM
4
4
3
4
2
2
X
X
3
X
1
X
4
1
1
1
3
1
1
1
4
2
4
1
2
2
1
3
4
X
4
4
3
3
4
1
3
3
3
3
Polyurethane AU, EU
Hifluor FKM
4
4
3
4
2
2
X
X
3
X
1
1
4
1
1
1
3
1
1
1
4
2
4
1
2
2
1
3
4
X
4
4
3
3
4
1
3
3
3
3
Polyacrylate ACM
Fluorocarbon FKM
V1164-75
V1164-75
E0540-80
V1164-75
V1164-75
V1164-75
V3819-75
V3819-75
E0540-80
V3819-75
N0674-70
N0674-70
V1164-75
N0674-70
N0674-70
N0674-70
E0540-80
N0674-70
N0674-70
N0508-75
E0540-80
E0540-80
E0540-80
N0674-70
V1164-75
V1164-75
N0674-70
E0540-80
E0540-80
V3819-75
E0540-80
E0540-80
E0540-80
E0540-80
E0540-80
N0674-70
V3819-75
E0540-80
E0540-80
E0540-80
Bromine Water
Bromobenzene
Bromobenzene Cyanide
Bromochlorotrifluoroethane (Halothane)
Bromoform
Bromomethane (Methyl Bromide)
Bromotrifluoroethylene (BFE)
Bromotrifluoromethane (F-13B1)
Brucine Sulfate
Buffered Oxide Etchants
Bunker Oil
Bunkers C (Fuel Oil)
Butadiene (Monomer)
Butane
Butane, 2, 2-Dimethyl
Butane, 2, 3-Dimethyl
Butanedial
Butanol (Butyl Alcohol)
Butene 2-Ethyl (1-Butene 2-Ethyl)
Butter-Animal Fat
Butyl Acetate or n-Butyl Acetate
Butyl Acetyl Ricinoleate
Butyl Acrylate
Butyl Alcohol
Butyl Alcohol (Secondary)
Butyl Alcohol (Tertiary)
Butyl Amine or N-Butyl Amine
Butyl Benzoate
Butyl Benzoate or n-Butyl Benzoate
Butyl Benzolate
Butyl Butyrate or n-Butyl Butyrate
Butyl Carbitol
Butyl Cellosolve
Butyl Cellosolve Acetate
Butyl Cellosolve Adipate
Butyl Chloride
Butyl Ether or n-Butyl Ether
Butyl Glycolate
Butyl Lactate
Butyl Laurate
Nitrile NBR
Styrene-Butadiene SBR
AFLAS
Neoprene
Polyacrylate
Polyurethane
Butyl
Fluorosilicone
Silicone
Neoprene/Chloroprene CR
4
4
1
4
4
4
X
X
1
X
4
X
4
1
2
2
1
1
4
2
4
2
4
1
2
2
4
1
4
X
4
3
3
1
4
2
4
1
1
1
4
4
1
4
4
4
X
X
1
X
4
X
4
3
3
3
1
1
4
4
4
4
4
1
2
2
4
1
2
X
4
4
4
1
4
4
4
1
1
1
4
4
4
4
4
3
X
X
4
X
1
X
4
1
1
1
4
4
1
1
4
X
4
4
4
4
4
4
4
X
4
4
4
4
4
1
4
4
4
4
4
4
4
4
3
X
X
X
4
X
2
X
4
1
4
4
4
4
4
1
4
4
X
4
4
4
4
4
X
X
X
X
4
4
4
1
3
4
4
4
4
4
1
4
4
4
X
X
1
X
4
X
4
4
4
4
1
2
4
2
2
1
4
2
2
2
4
1
1
X
1
1
2
1
2
4
3
1
1
1
4
4
1
4
4
4
X
X
1
X
4
X
4
4
4
4
1
1
4
4
4
4
4
1
2
2
4
1
4
X
4
4
4
1
4
4
4
1
1
1
4
4
1
4
4
4
X
X
1
X
4
X
4
4
4
4
1
1
4
4
4
4
4
1
2
2
4
1
4
X
4
4
4
1
4
4
4
1
1
1
4
4
1
4
4
4
X
X
1
X
4
X
4
4
4
4
1
1
4
4
4
4
4
1
2
2
4
1
4
X
4
4
4
1
4
4
4
1
1
1
1
4
1
4
4
4
X
X
1
X
4
X
4
2
2
2
1
1
4
2
4
2
4
1
2
2
4
1
4
X
4
2
4
1
4
2
4
1
1
1
2
1
1
2
2
1
X
X
1
X
1
X
1
3
3
3
1
1
3
1
4
2
4
1
2
2
4
1
1
X
1
4
4
1
2
1
3
1
1
1
4
4
2
4
X
X
X
X
2
X
2
X
4
4
4
4
2
2
4
2
4
X
2
2
2
2
4
2
X
X
X
4
X
2
2
2
4
2
2
2
5700 Handbook
Fluorocarbon FKM
Hifluor FKM
Perfluoroelastomer FFKM
Neoprene/Chloroprene CR
Styrene-Butadiene SBR
Polyacrylate ACM
Polyurethane AU, EU
Butyl IIR
Butadiene BR
Isoprene IR
Natural Rubber NR
Hypalon CSM
Fluorosilicone FVMQ
V1164-75
E0540-80
V1164-75
E0540-80
V1164-75
V1164-75
V1164-75
E0540-80
V1164-75
E0540-80
E0540-80
V1164-75
4
3
4
3
2
2
2
4
4
3
3
2
4
3
4
3
2
2
2
4
4
3
3
2
4
1
2
1
4
4
4
2
2
1
1
4
1
3
1
3
1
1
1
4
2
3
3
1
1
2
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
X
2
X
2
X
2
2
1
X
X
X
4
1
4
1
4
4
3
4
4
1
1
4
4
1
4
1
4
4
4
4
4
1
1
4
4
4
X
4
X
4
4
4
4
4
4
4
4
4
X
4
X
3
4
4
X
4
4
3
4
1
2
1
4
4
4
2
2
1
1
4
4
1
4
1
4
4
4
4
4
1
1
4
4
1
X
1
4
4
4
4
X
1
1
4
4
1
4
1
4
4
4
4
X
1
1
4
4
1
4
1
4
4
4
4
4
1
1
4
X
1
2
1
2
2
2
4
X
1
1
2
4
2
X
2
X
X
4
4
X
2
2
X
E0540-80
E0540-80
E0540-80
E0540-80
E0540-80
E0540-80
N0674-70
E0540-80
E0540-80
V1164-75
E0540-80
E0540-80
E0540-80
N0674-70
V3819-75
N0674-70
E0540-80
N0674-70
E0540-80
V3819-75
N0674-70
N0674-70
E0540-80
N0674-70
E0540-80
N0674-70
E0540-80
3
3
3
3
3
3
1
2
3
2
3
3
2
1
X
1
3
1
3
X
1
1
3
1
3
1
2
3
3
3
3
3
3
1
2
3
2
3
3
2
1
X
1
3
1
3
X
1
1
3
1
3
1
2
1
1
1
1
1
1
1
1
1
4
1
1
1
1
X
1
1
1
1
X
1
1
1
1
1
1
1
3
3
3
3
3
3
1
4
3
1
3
3
2
1
X
1
3
1
3
X
X
1
3
1
3
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
X
X
X
X
X
X
1
2
X
X
X
X
1
1
X
1
X
1
X
X
1
1
X
1
X
1
1
1
1
1
1
1
1
X
2
1
4
1
1
2
1
X
1
1
1
1
X
1
1
1
1
1
1
2
1
1
1
1
1
1
X
4
1
4
1
1
2
1
X
1
1
1
1
X
1
1
1
1
1
1
2
4
4
4
4
4
4
4
4
4
4
4
4
3
1
X
3
4
1
4
X
X
1
4
1
4
4
4
4
4
4
4
4
4
4
4
4
3
4
4
3
1
X
3
4
1
4
X
X
1
4
1
4
2
4
1
1
1
1
1
1
1
1
1
4
1
1
1
1
X
1
1
1
1
X
1
1
1
1
1
1
1
1
1
1
1
1
1
X
4
1
4
1
1
4
1
X
1
1
1
1
X
1
1
1
1
1
1
2
1
1
1
1
1
1
X
1
1
4
1
1
4
1
X
1
1
1
1
X
1
1
1
1
1
1
2
1
1
1
1
1
1
X
1
1
4
1
1
4
1
X
1
1
1
1
X
1
1
1
1
1
1
2
1
1
1
1
1
1
X
2
1
4
1
1
1
1
X
1
1
1
1
X
1
1
1
1
1
1
1
1
1
1
1
1
1
1
4
1
2
1
1
3
1
X
1
1
1
1
X
X
1
1
1
1
1
2
2
2
2
2
2
2
X
4
2
X
2
2
3
1
X
1
2
1
2
X
1
1
2
1
2
1
2
7-11
Seals
AFLAS
Neoprene
Polyacrylate
Polyurethane
Butyl
Fluorosilicone
Silicone
Nitrile NBR
5700 Handbook
Fluorocarbon FKM
Hifluor FKM
Perfluoroelastomer FFKM
Neoprene/Chloroprene CR
Styrene-Butadiene SBR
Polyacrylate ACM
Polyurethane AU, EU
Butyl IIR
Butadiene BR
Isoprene IR
Natural Rubber NR
Hypalon CSM
Fluorosilicone FVMQ
3
3
X
1
3
1
X
X
3
1
3
3
X
1
1
2
2
3
1
1
3
2
3
1
2
2
2
1
1
1
X
1
1
3
X
2
4
4
1
1
3
3
X
1
3
1
X
X
3
1
3
3
X
1
1
2
2
3
1
1
3
2
3
1
2
2
2
1
1
1
X
1
1
3
X
2
4
4
1
1
1
1
X
1
1
1
X
X
1
1
1
1
X
1
1
4
4
1
1
1
1
1
1
1
4
4
4
1
4
4
2
4
4
2
X
2
2
4
1
1
3
3
X
1
3
1
X
X
3
1
3
3
X
1
1
1
1
3
1
1
3
1
3
1
1
1
1
1
1
1
4
1
1
1
X
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
X
X
X
1
X
1
X
X
X
1
X
X
X
1
1
X
X
X
1
1
X
1
X
1
X
X
X
1
X
X
3
X
X
1
X
1
1
2
1
1
1
1
X
1
1
1
X
X
1
2
1
1
X
1
1
4
4
1
1
1
1
1
1
1
4
4
4
1
2
2
X
2
2
2
X
2
4
4
1
1
1
1
X
1
1
1
X
X
1
1
1
1
X
1
1
4
4
1
2
2
1
2
1
1
4
4
4
1
4
4
X
4
4
4
X
2
4
4
1
1
4
4
X
1
4
1
X
X
4
1
4
4
X
1
X
4
4
4
4
4
4
4
4
1
4
4
4
4
1
1
4
1
1
4
X
4
4
3
1
1
4
4
X
1
4
1
X
X
4
1
4
4
X
1
X
3
3
4
1
1
4
1
4
1
3
3
3
4
1
1
4
1
1
4
X
4
3
X
1
1
1
1
X
1
1
1
X
X
1
1
1
1
X
1
1
4
4
1
1
1
1
1
1
1
4
4
4
1
4
4
2
4
4
2
X
2
2
4
1
1
1
1
X
1
1
1
X
X
1
1
1
1
X
1
1
4
4
1
2
2
1
2
1
1
4
4
4
1
4
4
2
4
4
4
X
2
4
4
1
1
1
1
X
1
1
1
X
X
1
1
1
1
X
1
1
4
4
1
2
2
1
2
1
1
4
4
4
1
4
4
2
4
4
4
X
2
4
4
1
1
1
1
X
1
1
1
X
X
1
1
1
1
X
1
1
4
4
1
2
2
1
2
1
1
4
4
4
1
4
4
2
4
4
4
X
2
4
4
1
1
1
1
X
1
1
1
X
X
1
1
1
1
X
1
1
4
4
1
1
1
1
1
1
1
4
4
4
1
2
2
X
2
2
2
X
2
4
4
1
1
1
1
X
1
1
1
X
X
1
X
1
1
X
1
X
2
2
1
1
1
1
1
1
1
2
2
2
1
1
1
4
1
1
1
X
2
1
1
1
1
2
2
X
2
2
1
X
X
2
1
2
2
X
2
X
X
X
2
1
1
2
1
2
2
X
X
X
1
2
2
2
2
2
X
X
2
4
4
1
1
E0540-80
E0540-80
V3819-75
N0674-70
E0540-80
N0674-70
V3819-75
V3819-75
E0540-80
N0674-70
E0540-80
E0540-80
V3819-75
N0674-70
N0674-70
V1164-75
V1164-75
E0540-80
N0674-70
N0674-70
E0540-80
E0540-80
E0540-80
N0674-70
V1164-75
V1164-75
V1164-75
N0674-70
N0674-70
N0674-70
E0540-80
N0674-70
N0674-70
V1164-75
V3819-75
E0540-80
V0494-70
V1164-75
N0674-70
E0962-90
7-12
Seals
AFLAS
Neoprene
Polyacrylate
Polyurethane
Butyl
Fluorosilicone
Silicone
Nitrile NBR
5700 Handbook
Fluorocarbon FKM
Hifluor FKM
Perfluoroelastomer FFKM
Neoprene/Chloroprene CR
Styrene-Butadiene SBR
Polyacrylate ACM
Polyurethane AU, EU
Butyl IIR
Butadiene BR
Isoprene IR
Natural Rubber NR
Hypalon CSM
Fluorosilicone FVMQ
4
2
1
X
2
2
2
3
1
3
3
3
4
4
4
1
3
3
3
3
3
X
2
3
3
3
3
1
1
X
1
3
X
2
2
2
3
4
4
2
4
2
1
X
2
2
2
3
1
3
3
3
4
4
4
1
3
3
3
3
3
X
2
3
3
3
3
1
1
X
1
3
X
2
2
2
3
4
4
2
4
4
1
X
4
4
1
1
2
1
1
1
2
2
2
1
1
1
1
1
1
X
4
1
1
1
1
4
4
X
4
1
X
4
4
4
1
4
4
4
1
1
1
X
1
1
1
3
1
3
3
3
4
4
4
1
3
3
3
3
3
X
1
3
3
3
3
1
1
X
1
3
X
1
1
1
3
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
1
X
2
2
1
X
1
X
X
X
3
2
2
1
X
X
X
X
X
X
2
X
X
X
X
2
X
X
2
X
X
X
2
2
X
2
2
X
4
4
2
X
4
4
1
1
1
1
1
1
4
4
4
1
1
1
1
1
1
X
4
1
1
1
1
2
2
X
2
1
X
4
3
2
1
4
4
4
4
4
2
X
4
4
2
1
1
1
1
1
4
4
4
1
1
1
1
1
1
X
4
1
1
1
1
4
4
X
4
1
X
4
4
4
1
4
4
4
3
4
X
X
4
4
1
4
1
4
4
4
4
4
4
3
4
4
4
4
4
X
2
4
4
4
4
1
1
X
X
4
X
4
X
2
4
4
4
4
X
4
1
X
4
4
1
4
1
4
4
4
4
4
4
4
4
4
4
4
4
X
4
4
4
4
4
4
1
X
3
4
X
3
X
4
4
4
4
3
4
4
1
X
4
4
1
1
2
1
1
1
2
2
2
1
1
1
1
1
1
X
4
1
1
1
1
4
4
X
3
1
X
4
4
4
1
4
4
4
4
4
2
X
4
4
2
1
1
1
1
1
4
4
4
1
1
1
1
1
1
X
4
1
1
1
1
4
4
X
4
1
X
4
4
4
1
4
4
4
4
4
2
X
4
4
1
1
1
1
1
1
4
4
4
1
1
1
1
1
1
X
4
1
1
1
1
4
4
X
4
1
X
4
4
4
1
4
4
4
4
4
2
X
4
4
1
1
1
1
1
1
4
4
4
1
1
1
1
1
1
X
4
1
1
1
1
4
4
X
4
1
X
4
4
4
1
4
4
4
4
4
2
X
4
4
1
1
1
1
1
1
4
4
4
1
1
1
1
1
1
X
4
1
1
1
1
2
2
X
3
1
X
4
3
4
1
4
4
4
1
2
2
X
2
2
1
1
1
1
1
1
4
4
4
1
1
1
1
1
1
X
2
1
1
1
1
3
1
X
2
1
X
2
2
2
1
1
1
2
4
4
1
X
4
4
1
2
1
2
2
2
4
4
4
1
2
2
2
2
2
X
4
2
2
2
2
4
2
X
4
2
X
X
4
4
2
4
4
X
V1164-75
V1164-75
N0674-70
V1164-75
V1164-75
V1164-75
E0540-80
E0540-80
N0674-70
E0540-80
E0540-80
E0540-80
E0540-80
E0540-80
E0540-80
N0674-70
E0540-80
E0540-80
E0540-80
E0540-80
E0540-80
V3819-75
V1164-75
E0540-80
E0540-80
E0540-80
E0540-80
N0674-70
N0674-70
V3819-75
N0674-70
E0540-80
E1235-80
V1164-75
V1164-75
V1164-75
E0540-80
V1164-75
V1164-75
V1164-75
7-13
Seals
AFLAS
Neoprene
Polyacrylate
Polyurethane
Butyl
Fluorosilicone
Silicone
Nitrile NBR
5700 Handbook
Fluorocarbon FKM
Hifluor FKM
Perfluoroelastomer FFKM
Neoprene/Chloroprene CR
Styrene-Butadiene SBR
Polyacrylate ACM
Polyurethane AU, EU
Butyl IIR
Butadiene BR
Isoprene IR
Natural Rubber NR
Hypalon CSM
Fluorosilicone FVMQ
X
X
4
4
4
3
4
X
2
3
4
4
X
3
3
3
4
4
2
2
2
2
4
2
4
1
4
1
3
2
4
3
4
3
4
2
2
X
4
4
X
X
4
4
4
3
4
X
2
3
4
4
X
3
3
3
4
4
2
2
2
2
4
2
4
1
4
1
3
2
4
3
4
3
4
2
2
X
4
4
X
X
3
4
4
2
4
X
4
1
2
1
X
1
1
1
4
4
4
4
4
4
2
4
4
4
4
4
1
4
4
1
4
1
4
4
4
X
4
4
X
X
1
1
4
1
4
X
1
3
4
4
X
3
3
3
1
1
1
1
1
1
1
1
1
1
1
1
3
1
1
3
1
3
1
1
1
X
4
1
3
2
1
1
2
1
1
2
1
2
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
1
1
2
1
1
2
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
X
X
2
2
4
1
3
X
X
X
2
2
X
X
X
X
2
2
X
X
X
X
1
X
2
X
2
X
X
X
2
X
X
X
X
X
X
X
4
2
X
X
4
4
4
4
4
X
4
1
4
4
X
1
1
1
4
4
4
4
4
4
4
4
4
2
4
2
1
4
4
1
4
1
4
4
4
X
4
4
X
X
4
4
4
X
4
X
4
1
4
4
X
1
1
1
4
4
4
4
4
4
4
4
4
4
4
4
1
4
4
1
4
1
4
4
4
X
4
4
X
X
4
4
4
X
4
X
4
4
4
4
X
4
4
4
4
4
4
4
4
4
4
4
4
1
4
1
4
4
4
4
4
4
4
4
4
X
4
4
X
X
4
4
4
X
4
X
3
4
4
4
X
4
4
4
4
4
3
3
3
3
4
3
4
1
4
1
4
3
4
4
4
4
4
3
3
X
4
4
X
X
3
4
4
X
4
X
4
1
2
2
X
1
1
1
4
4
4
4
4
4
2
4
4
4
4
4
1
4
4
1
4
1
4
4
4
X
4
4
X
X
4
4
4
X
4
X
4
1
4
4
X
1
1
1
4
4
4
4
4
4
4
4
4
4
4
4
1
4
4
1
4
1
4
4
4
X
4
4
X
X
4
4
4
X
4
X
4
1
4
4
X
1
1
1
4
4
4
4
4
4
4
4
4
4
4
4
1
4
4
1
4
1
4
4
4
X
4
4
X
X
4
4
4
X
4
X
4
1
4
4
X
1
1
1
4
4
4
4
4
4
4
4
4
4
4
4
1
4
4
1
4
1
4
4
4
X
4
4
X
X
3
4
4
X
4
X
4
1
1
4
X
1
1
1
4
4
4
4
4
4
4
4
4
2
4
2
1
4
4
1
4
1
4
4
4
X
4
4
X
X
2
2
4
X
4
X
2
1
4
4
X
1
1
1
2
2
2
2
2
2
2
2
2
1
1
1
1
2
4
1
2
1
2
2
2
X
4
2
X
X
X
X
4
X
4
X
X
2
X
4
X
2
2
2
4
4
X
X
X
X
4
X
4
2
4
2
2
X
4
2
4
2
4
X
X
X
4
4
V3819-75
V3819-75
V1164-75
V1164-75
Factory
V1164-75
Factory
V3819-75
V1164-75
E0540-80
E0540-80
E0540-80
V3819-75
E0540-80
E0540-80
E0540-80
V1164-75
V1164-75
V1164-75
V1164-75
V1164-75
V1164-75
V1164-75
V1164-75
V1164-75
N0674-70
V1164-75
N0674-70
E0540-80
V1164-75
V1164-75
E0540-80
V1164-75
E0540-80
V1164-75
V1164-75
V1164-75
V3819-75
Factory
V1164-75
7-14
Seals
AFLAS
Neoprene
Polyacrylate
Polyurethane
Butyl
Fluorosilicone
Silicone
Nitrile NBR
5700 Handbook
Fluorocarbon FKM
Hifluor FKM
Perfluoroelastomer FFKM
Neoprene/Chloroprene CR
Styrene-Butadiene SBR
Polyacrylate ACM
Polyurethane AU, EU
Butyl IIR
Butadiene BR
Isoprene IR
Natural Rubber NR
Hypalon CSM
Fluorosilicone FVMQ
3
2
X
2
X
2
1
4
4
X
X
X
X
4
X
X
2
X
2
2
2
1
1
1
1
1
2
1
1
1
3
1
X
X
3
1
1
2
1
4
3
2
X
2
X
2
1
4
4
X
X
X
X
4
X
X
X
X
2
2
2
1
1
1
1
1
X
X
1
1
3
1
X
X
3
1
1
2
1
4
1
4
X
2
X
4
1
2
2
X
X
X
X
2
X
X
2
X
4
4
4
4
1
4
4
4
2
X
1
1
1
1
X
X
1
3
1
4
1
4
3
1
X
1
X
1
1
1
1
X
X
X
X
1
X
X
1
X
1
1
1
1
1
1
1
1
1
1
1
1
3
1
X
X
3
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
X
X
X
1
X
X
1
1
X
X
X
X
X
1
X
X
2
X
X
X
X
2
1
2
2
2
X
X
1
1
X
1
X
X
X
2
1
X
1
2
1
4
X
2
X
4
1
4
4
X
X
X
X
4
X
X
X
X
4
4
4
2
1
2
2
2
X
X
1
1
1
1
X
X
1
3
2
4
1
4
1
4
X
4
X
4
1
4
4
X
X
X
X
X
X
X
X
X
4
4
4
4
1
4
4
4
X
X
1
1
1
1
X
X
1
4
4
4
1
4
4
4
X
4
X
4
4
4
4
X
X
X
X
X
X
X
X
X
4
4
4
1
X
1
1
1
X
X
1
4
4
4
X
X
4
1
1
4
4
4
4
3
X
4
X
3
X
4
3
X
X
X
X
X
X
X
X
X
3
3
3
1
1
2
1
2
X
X
1
4
4
4
X
X
4
3
1
3
4
4
1
4
X
2
X
4
1
2
4
X
X
X
X
X
X
X
X
X
4
4
4
4
1
4
4
4
X
X
1
1
1
1
X
X
1
3
1
4
1
4
1
4
X
4
X
4
1
4
4
X
X
X
X
X
X
X
X
X
4
4
4
4
1
4
4
4
X
X
1
1
1
1
X
X
1
4
4
4
1
4
1
4
X
4
X
4
1
4
4
X
X
X
X
X
X
X
X
X
4
4
4
4
1
4
4
4
X
X
1
1
1
1
X
X
1
4
4
4
1
4
1
4
X
4
X
4
1
4
4
X
X
X
X
X
X
X
X
X
4
4
4
4
1
4
4
4
X
X
1
1
1
1
X
X
1
4
4
4
1
4
1
4
X
2
X
4
1
4
4
X
X
X
X
X
X
X
X
X
4
4
4
2
1
4
2
4
X
X
1
1
1
1
X
X
1
3
2
4
1
4
1
2
X
1
X
2
X
2
2
X
X
X
X
X
X
X
X
X
2
2
2
1
1
1
1
1
X
X
1
1
1
1
X
X
1
1
1
2
1
2
2
X
X
X
X
X
1
2
X
X
X
X
X
X
X
X
X
X
X
X
X
4
1
4
4
4
X
X
2
1
2
1
X
X
2
1
2
X
1
2
E0540-80
V1164-75
V3819-75
V1164-75
V3819-75
V1164-75
N0674-70
V1164-75
V1164-75
V3819-75
V3819-75
V3819-75
V3819-75
V1164-75
V3819-75
V3819-75
V1164-75
V3819-75
V1164-75
V1164-75
V1164-75
N0674-70
C0873-70
N0674-70
N0674-70
N0674-70
V1164-75
N0674-70
N0674-70
N0674-70
E0540-80
N0674-70
V3819-75
V3819-75
E0540-80
N0674-70
N0674-70
V1164-75
N0508-75
V1164-75
7-15
Seals
AFLAS
Neoprene
Polyacrylate
Polyurethane
Butyl
Fluorosilicone
Silicone
Nitrile NBR
5700 Handbook
Fluorocarbon FKM
Hifluor FKM
Perfluoroelastomer FFKM
Neoprene/Chloroprene CR
Styrene-Butadiene SBR
Polyacrylate ACM
Polyurethane AU, EU
Butyl IIR
Butadiene BR
Isoprene IR
Natural Rubber NR
Hypalon CSM
Fluorosilicone FVMQ
2
4
1
2
3
3
1
1
3
X
2
1
1
1
1
1
1
1
1
1
X
4
4
2
2
2
2
4
X
2
1
X
X
X
X
X
X
1
1
4
2
4
1
2
3
3
1
1
3
X
X
1
1
1
1
1
1
1
1
1
X
4
4
2
2
2
2
4
X
X
1
X
X
X
X
X
X
1
1
4
2
X
3
1
1
1
1
1
1
X
2
1
1
1
1
1
3
3
4
4
X
4
4
4
4
4
4
4
X
2
4
X
X
X
X
X
X
4
4
2
X
X
1
4
3
3
1
1
3
X
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
X
1
1
X
X
X
X
X
X
1
1
4
X
X
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
X
X
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
X
2
2
X
X
1
1
X
X
2
1
1
1
1
1
2
2
2
2
X
2
2
X
X
2
X
2
X
2
2
X
X
X
X
X
X
2
2
3
1
4
2
2
1
1
2
1
1
X
X
1
1
1
1
1
3
3
2
2
X
4
4
4
4
4
4
4
X
X
2
X
X
X
X
X
X
3
2
4
2
4
4
4
1
1
1
1
1
X
X
1
1
2
2
2
4
4
4
4
X
4
4
4
4
4
4
4
X
X
4
X
X
X
X
X
X
4
4
4
X
X
4
4
4
4
1
1
4
X
X
1
1
4
4
4
1
1
1
1
X
4
4
4
4
1
4
4
X
X
1
X
X
X
X
X
X
2
X
4
X
2
1
4
4
4
1
1
4
X
X
1
1
1
2
3
1
1
3
3
X
X
4
3
3
X
3
4
X
X
1
X
X
X
X
X
X
1
X
4
2
4
4
1
1
1
1
1
1
X
X
1
1
2
2
2
3
3
4
4
X
4
4
4
4
4
4
4
X
X
4
X
X
X
X
X
X
4
4
2
1
4
4
4
1
1
1
1
1
X
X
1
1
2
2
2
4
4
4
4
X
4
4
4
4
4
4
4
X
X
4
X
X
X
X
X
X
4
4
4
1
4
4
1
1
1
1
1
1
X
X
1
1
2
2
2
4
4
4
4
X
4
4
4
4
4
4
4
X
X
4
X
X
X
X
X
X
4
4
4
1
4
4
1
1
1
1
1
1
X
X
1
1
2
2
1
4
4
4
4
X
4
4
4
4
4
4
4
X
X
4
X
X
X
X
X
X
4
4
4
X
4
2
2
1
1
2
1
1
X
X
1
1
1
1
1
2
2
4
4
X
4
4
4
4
4
4
4
X
X
2
X
X
X
X
X
X
4
2
4
X
X
1
4
1
1
1
1
1
X
X
1
1
1
1
1
1
2
1
1
X
X
X
2
2
2
2
2
X
X
1
X
X
X
X
X
X
1
1
4
X
4
4
4
2
2
1
1
2
X
X
1
1
1
1
1
1
1
4
4
X
4
4
X
X
4
X
4
X
X
4
X
X
X
X
X
X
4
4
4
C0873-70
Factory
V1164-75
E0540-80
E0540-80
E0540-80
N0674-70
N0674-70
E0540-80
V3819-75
V1164-75
N0674-70
N0674-70
N0674-70
N0674-70
N0674-70
N0674-70
N0674-70
N0674-70
N0674-70
V1164-75
V0834-70
V0834-70
V1164-75
V1164-75
V1164-75
V1164-75
V1164-75
V3819-75
V1164-75
N0674-70
V3819-75
V3819-75
V3819-75
V3819-75
V3819-75
V3819-75
N0674-70
N0674-70
E0540-80
7-16
Seals
AFLAS
Neoprene
Polyacrylate
Polyurethane
Butyl
Fluorosilicone
Silicone
Nitrile NBR
5700 Handbook
Fluorocarbon FKM
Hifluor FKM
Perfluoroelastomer FFKM
Neoprene/Chloroprene CR
Styrene-Butadiene SBR
Polyacrylate ACM
Polyurethane AU, EU
Butyl IIR
Butadiene BR
Isoprene IR
Natural Rubber NR
Hypalon CSM
Fluorosilicone FVMQ
V1164-75
N0674-70
V8545-75
N0674-70
V1164-75
N0674-70
V1164-75
V1164-75
2
1
X
1
2
1
1
4
2
1
X
1
2
1
1
4
4
4
X
4
4
4
4
4
1
1
X
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
X
X
X
X
X
2
2
X
4
2
X
2
4
3
3
4
4
4
X
4
4
4
4
4
4
1
X
1
4
2
2
4
3
1
X
1
3
1
1
4
4
4
X
4
4
4
4
4
4
4
X
4
4
4
4
4
4
4
X
4
4
4
4
4
4
4
X
4
4
4
4
4
4
2
X
2
4
4
4
4
2
1
X
1
2
1
1
2
X
2
X
2
X
4
4
4
V1164-75
V1164-75
N0674-70
E0603-70
N0674-70
E0540-80
N0674-70
N0674-70
N0674-70
E0540-80
N0674-70
E0540-80
E0540-80
E0540-80
E0540-80
E0540-80
V3819-75
V3819-75
N0674-70
V1164-75
V1164-75
Factory
V1164-75
V3819-75
V1164-75
V1164-75
E0540-80
Factory
V1164-75
E0540-80
E0540-80
2
4
1
3
1
1
1
1
1
3
1
3
2
4
4
3
X
X
1
3
2
4
4
X
2
4
3
4
2
4
4
2
4
1
3
1
1
1
1
1
3
1
3
X
4
4
3
X
X
1
3
2
4
4
X
2
4
3
4
2
4
4
4
4
4
1
1
1
2
4
4
1
4
1
1
1
1
1
X
X
4
4
4
2
2
X
4
4
1
3
4
2
2
1
1
1
4
1
1
1
1
1
3
1
3
2
4
4
3
X
X
1
2
1
4
2
X
1
1
3
3
1
3
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
X
2
2
2
1
1
1
2
X
X
1
X
X
2
2
X
X
X
X
2
X
2
2
X
X
2
X
3
X
3
2
4
4
3
2
1
2
1
2
2
1
2
1
1
4
2
1
X
X
2
3
4
4
4
X
4
4
1
4
4
4
4
4
4
4
1
1
2
2
4
4
1
X
1
1
4
4
1
X
X
4
4
4
4
4
X
4
4
1
4
4
4
4
4
X
1
X
4
4
X
1
1
4
X
4
4
4
4
4
X
X
1
X
4
X
4
X
4
4
4
3
4
4
4
3
X
2
X
4
4
X
2
1
4
X
4
4
4
4
4
X
X
1
X
3
2
2
X
3
4
4
2
3
3
4
4
4
4
2
1
1
2
4
4
1
X
1
1
1
1
1
X
X
4
4
4
2
2
X
4
4
1
3
4
3
2
4
4
4
X
1
2
2
4
4
1
X
1
1
4
4
1
X
X
4
4
4
4
4
X
4
4
1
4
4
4
4
4
4
4
X
1
2
1
4
4
1
X
1
1
4
4
1
X
X
4
4
4
4
4
X
4
4
1
4
4
4
4
4
4
4
X
1
2
1
4
4
1
X
1
1
4
4
1
X
X
4
4
4
4
4
X
4
4
1
4
4
4
4
4
4
3
2
1
2
1
4
2
1
X
1
1
4
2
1
X
X
2
3
4
4
4
X
4
4
1
4
4
4
4
2
1
1
4
1
1
1
2
1
1
X
1
1
4
4
1
X
X
1
2
2
X
3
X
2
2
1
3
2
3
2
X
4
2
3
1
1
1
4
2
2
X
2
2
4
4
2
X
X
2
4
X
X
3
X
X
4
2
4
X
2
2
7-17
Seals
AFLAS
Neoprene
Polyacrylate
Polyurethane
Butyl
Fluorosilicone
Silicone
Nitrile NBR
5700 Handbook
7-18
Seals
2
X
X
X
X
X
3
X
X
X
X
X
X
4
X
X
2
2
2
X
X
X
4
X
2
2
X
X
1
X
2
X
X
Fluorosilicone FVMQ
X
X
4
X
X
Hypalon CSM
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Natural Rubber NR
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
Isoprene IR
1
1
4
1
3
1
1
1
1
1
1
1
3
3
1
1
1
1
1
X
4
3
1
1
1
1
3
1
3
4
1
2
3
4
3
1
X
X
1
1
Butadiene BR
4
4
1
4
1
4
4
4
4
4
4
4
1
3
4
4
4
4
4
X
4
1
4
4
4
4
1
X
1
4
4
2
1
1
1
1
X
2
4
4
Butyl IIR
Perfluoroelastomer FFKM
2
2
4
2
3
4
4
2
2
2
2
2
3
4
2
2
2
2
2
X
1
3
2
1
2
2
3
X
3
4
2
2
X
X
3
1
X
4
2
2
Polyurethane AU, EU
Hifluor FKM
2
2
4
2
3
4
4
2
2
2
2
2
3
4
2
2
2
2
2
X
1
3
2
1
2
2
3
X
3
4
2
2
4
2
3
1
X
4
2
2
Polyacrylate ACM
Fluorocarbon FKM
V1164-75
V1164-75
E0540-80
V1164-75
E0540-80
V1164-75
V1164-75
V1164-75
V1164-75
V1164-75
V1164-75
V1164-75
E0540-80
Factory
V1164-75
V1164-75
V1164-75
V1164-75
V1164-75
V3819-75
N0674-70
E0540-80
V1164-75
N0674-70
V1164-75
V1164-75
E0540-80
V1164-75
E0540-80
Factory
V1164-75
V1164-75
E0540-80
E0540-80
E0540-80
E0540-80
V8545-75
E0540-80
V1164-75
V1164-75
Dibutyl Thioglycolate
Dibutyl Thiourea
Dibutylamine
Dichloroacetic Acid
Dichloroaniline
Dichlorobenzene or o-Dichlorobenzene
Dichlorobenzene or p-Dichlorobenzene
Dichlorobutane
Dichlorobutene
Dichlorodiphenyl-Dichloroethane (DDD)
Dichloroethane
Dichloroethylene
Dichlorohydrin
Dichloroisopropyl Ether
Dichloromethane
Dichlorophenol
Dichlorophenoxyacetic Acid
Dichloropropane
Dichloropropene
Dichlorosilane
Dicyclohexylamine
Dicyclohexylammonium Nitrate
Dieldrin
Diesel Oil
Di-ester Lubricant MIL-L-7808
Di-ester Synthetic Lubricants
Diethanolamine (DEA)
Diethyl Benzene
Diethyl Carbonate
Diethyl Ether
Diethyl Phthalate
Diethyl Sebacate
Diethyl Sulfate
Diethylamine
Diethylaniline
Diethylene Glycol
Diethylenetriamine
Difluorodibromomethane
Difluoroethane
Difluoromonochloroethane
Nitrile NBR
Styrene-Butadiene SBR
AFLAS
Neoprene
Polyacrylate
Polyurethane
Butyl
Fluorosilicone
Silicone
Neoprene/Chloroprene CR
4
4
3
4
1
4
4
4
4
4
4
4
1
4
4
4
4
4
4
X
4
1
4
3
4
4
1
X
1
3
4
4
4
1
1
1
X
4
4
4
4
4
4
4
1
4
4
4
4
4
4
4
1
4
4
4
4
4
4
X
4
1
4
4
4
4
1
X
1
4
4
4
X
1
1
1
X
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
3
4
4
4
4
4
X
4
4
4
1
2
2
4
X
4
3
4
4
X
4
4
2
X
4
4
4
3
3
4
3
4
4
4
4
3
3
3
3
4
2
3
3
3
3
3
X
4
4
3
3
4
4
4
X
4
1
3
4
X
4
4
4
X
4
3
3
4
4
4
4
1
4
4
4
4
4
4
4
1
4
4
4
4
4
4
X
4
1
4
4
4
4
1
X
1
4
4
2
X
1
1
1
X
2
4
4
4
4
4
4
1
4
4
4
4
4
4
4
1
4
4
4
4
4
4
X
4
1
4
4
4
4
1
X
1
4
4
4
X
1
1
1
X
4
4
4
4
4
4
4
1
4
4
4
4
4
4
4
1
4
4
4
4
4
4
X
4
1
4
4
4
4
1
X
1
4
4
4
X
1
1
1
X
4
4
4
4
4
4
4
1
4
4
4
4
4
4
4
1
4
4
4
4
4
4
X
4
1
4
4
4
4
1
X
1
4
4
4
X
1
1
1
X
4
4
4
4
4
4
4
1
4
4
4
4
4
4
4
1
4
4
4
4
4
4
X
4
1
4
3
4
4
1
X
1
4
4
4
X
1
1
1
X
4
4
4
2
2
4
2
1
2
2
2
2
2
2
2
1
3
2
2
2
2
2
X
4
1
2
1
2
2
1
X
1
3
2
2
X
1
1
1
X
X
2
2
X
X
3
X
2
4
4
4
X
X
X
X
2
4
X
X
X
X
X
X
2
2
X
4
4
4
2
X
2
4
X
2
2
2
2
2
X
4
X
X
5700 Handbook
Fluorocarbon FKM
Hifluor FKM
Perfluoroelastomer FFKM
Neoprene/Chloroprene CR
Styrene-Butadiene SBR
Polyacrylate ACM
Polyurethane AU, EU
Butyl IIR
Butadiene BR
Isoprene IR
Natural Rubber NR
Hypalon CSM
Fluorosilicone FVMQ
3
3
3
X
1
2
3
X
4
2
2
3
2
1
1
3
2
3
2
2
4
3
2
2
2
X
4
4
4
1
4
4
2
4
4
2
X
2
X
X
3
3
3
X
1
2
3
X
4
2
2
3
2
1
X
3
2
3
2
2
4
3
2
2
2
X
4
4
4
1
4
4
2
4
4
2
X
2
X
X
1
1
1
1
4
4
3
X
1
4
4
1
4
4
2
1
1
1
4
4
2
1
4
1
4
X
4
2
2
4
2
2
4
4
4
4
X
4
X
X
3
3
3
X
1
1
2
X
4
1
1
3
1
1
2
3
4
3
1
1
2
3
1
4
1
X
4
2
2
1
4
4
1
1
1
1
X
1
X
X
1
1
2
2
1
1
1
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
X
X
X
1
X
2
2
X
2
X
X
X
X
X
4
X
2
X
X
X
2
X
X
2
X
X
4
2
2
X
3
3
2
2
2
X
X
X
X
X
1
1
1
X
2
4
4
X
4
4
4
1
4
2
3
1
3
1
4
4
4
1
4
2
4
X
4
4
4
2
4
4
4
4
4
4
X
4
X
X
1
1
1
X
4
4
4
X
4
4
4
1
4
4
X
1
4
1
4
4
4
1
4
2
4
X
4
4
4
4
4
4
4
4
4
4
X
4
X
X
4
4
4
X
1
4
4
X
4
4
4
4
4
1
X
4
4
4
4
4
4
4
4
4
4
X
4
4
4
1
4
4
4
4
4
4
X
4
X
X
4
4
4
X
1
4
4
X
4
3
3
4
3
1
X
4
4
4
3
3
X
4
3
3
3
X
4
4
2
1
4
4
4
4
4
3
X
3
X
X
1
1
1
1
4
4
4
X
1
4
4
1
4
4
X
1
2
1
4
4
2
1
4
2
4
X
4
2
2
4
2
3
4
4
4
4
X
4
X
X
1
1
1
X
4
4
4
X
4
4
4
1
4
4
X
1
X
1
4
4
4
1
4
2
4
X
4
4
4
4
4
4
4
4
4
4
X
4
X
X
1
1
1
X
4
4
4
X
4
4
4
1
4
4
X
1
X
1
4
4
4
1
4
2
4
X
4
4
4
4
4
4
4
4
4
4
X
4
X
X
1
1
1
X
4
4
4
X
4
4
4
1
4
4
X
1
4
1
4
4
4
1
4
2
4
X
4
4
4
4
4
4
4
4
4
4
X
4
X
X
1
1
1
X
2
4
4
X
4
4
4
1
4
2
X
1
4
1
4
4
4
1
4
3
4
X
4
4
4
2
4
4
4
4
4
4
X
4
X
X
1
1
1
X
1
3
3
X
4
2
2
1
2
1
X
1
4
1
2
2
2
1
2
4
2
X
4
2
3
1
4
4
2
2
2
2
X
2
X
X
2
2
2
X
2
4
3
X
4
X
X
2
X
2
X
2
2
2
X
X
X
2
X
2
X
X
4
3
3
2
4
4
4
4
3
X
X
X
X
X
E0540-80
E0540-80
E0540-80
E0540-80
N0674-70
V1164-75
V1164-75
V3819-75
E0540-80
V1164-75
V1164-75
E0540-80
V1164-75
N0674-70
N0674-70
E0540-80
E0540-80
E0540-80
V1164-75
V1164-75
V1164-75
E0540-80
V1164-75
E0540-80
V1164-75
V8545-75
Factory
V1164-75
E0540-80
N0674-70
E0540-80
E0540-80
N0674-70
V1164-75
V1164-75
V1164-75
V3819-75
V1164-75
V3819-75
V3819-75
7-19
Seals
AFLAS
Neoprene
Polyacrylate
Polyurethane
Butyl
Fluorosilicone
Silicone
Nitrile NBR
5700 Handbook
Fluorocarbon FKM
Hifluor FKM
Perfluoroelastomer FFKM
Neoprene/Chloroprene CR
Styrene-Butadiene SBR
Polyacrylate ACM
Polyurethane AU, EU
Butyl IIR
Butadiene BR
Isoprene IR
Natural Rubber NR
Hypalon CSM
Fluorosilicone FVMQ
V1164-75
E0540-80
Factory
E0540-80
E0540-80
N0674-70
E0540-80
E0540-80
N0674-70
E0540-80
E0540-80
E0540-80
E0540-80
E0540-80
E0540-80
E0540-80
E0540-80
E0540-80
E0540-80
E0540-80
N0674-70
N0674-70
V3819-75
E0540-80
V1164-75
V1164-75
E3609-70
V1164-75
V1164-75
N0674-70
2
X
4
3
2
1
2
2
1
2
2
2
2
2
2
2
2
2
2
2
1
1
X
3
4
4
1
3
2
1
2
X
4
3
2
1
2
2
1
2
2
2
2
2
2
2
2
2
2
2
1
1
X
3
4
4
1
3
2
1
4
1
X
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
X
1
4
4
1
4
4
4
1
4
X
4
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
X
4
1
1
1
1
1
1
1
3
X
3
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
X
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
X
2
X
2
1
1
1
1
1
X
X
X
X
X
X
X
X
X
X
X
1
X
X
X
X
X
X
X
2
2
4
2
4
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
X
2
4
4
2
4
1
2
4
1
4
1
1
X
1
1
X
1
1
1
1
1
1
1
1
1
1
1
X
1
X
X
4
4
1
4
X
4
4
X
3
X
1
X
1
1
X
1
1
1
1
1
1
1
1
1
1
1
X
3
X
X
4
4
4
4
2
X
3
X
2
X
1
X
1
1
X
1
1
1
1
1
1
1
1
1
1
1
X
3
X
X
4
4
4
4
1
1
4
2
4
2
1
X
1
1
X
1
1
1
1
1
1
1
1
1
1
1
X
1
X
2
4
4
1
4
4
4
4
X
4
X
1
X
1
1
X
1
1
1
1
1
1
1
1
1
1
1
X
1
X
X
4
4
1
4
X
4
4
X
4
X
1
X
1
1
X
1
1
1
1
1
1
1
1
1
1
1
X
1
X
X
4
4
1
4
X
X
4
X
4
X
1
X
1
1
X
1
1
1
1
1
1
1
1
1
1
1
X
1
X
X
4
4
1
4
2
3
4
2
4
2
1
X
1
1
X
1
1
1
1
1
1
1
1
1
1
1
X
1
X
X
4
4
1
4
2
1
2
4
X
4
1
X
3
2
X
1
2
1
2
2
2
2
2
2
2
2
X
1
X
3
2
2
1
2
2
1
X
X
4
X
2
X
1
3
X
2
3
2
3
3
3
3
3
3
3
3
X
1
X
3
4
4
1
4
4
3
N0674-70
E0540-80
E0540-80
V3819-75
E0540-80
N0674-70
V1164-75
N0674-70
N0674-70
1
4
X
X
X
1
2
1
1
1
4
X
X
X
1
2
1
1
4
2
1
X
1
4
4
4
4
1
4
4
X
4
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
X
X
X
X
X
X
X
X
X
3
4
1
X
2
2
4
3
2
4
4
X
X
1
4
4
4
4
1
4
X
X
X
1
4
1
1
1
4
X
X
X
4
4
4
3
4
2
1
X
2
4
4
4
4
4
4
X
X
X
4
4
4
4
4
4
X
X
X
4
4
4
4
4
4
X
X
X
4
4
4
4
4
4
X
X
2
3
4
4
4
1
4
X
X
4
1
1
1
1
2
4
X
X
X
4
4
4
4
7-20
Seals
AFLAS
Neoprene
Polyacrylate
Polyurethane
Butyl
Fluorosilicone
Silicone
Nitrile NBR
5700 Handbook
Fluorocarbon FKM
Hifluor FKM
Perfluoroelastomer FFKM
Neoprene/Chloroprene CR
Styrene-Butadiene SBR
Polyacrylate ACM
Polyurethane AU, EU
Butyl IIR
Butadiene BR
Isoprene IR
Natural Rubber NR
Hypalon CSM
Fluorosilicone FVMQ
1
1
1
1
3
2
4
3
4
4
4
3
X
4
4
2
4
2
1
4
4
3
4
1
3
4
3
4
4
2
1
2
X
X
2
4
3
1
3
4
1
1
1
1
3
2
4
3
4
4
4
3
X
4
4
2
4
2
1
4
4
3
4
1
3
4
3
4
4
2
1
2
X
X
2
4
3
1
2
4
4
4
4
4
1
1
3
1
2
2
2
1
X
4
4
4
2
2
3
2
2
3
2
1
1
X
1
1
4
4
1
4
1
X
4
2
1
4
4
4
1
1
1
1
3
4
3
3
4
4
4
3
X
1
1
1
4
4
1
1
4
4
1
1
3
2
3
2
1
1
1
1
4
X
1
X
3
1
2
2
1
1
1
1
1
1
1
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
X
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
X
1
1
1
1
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
1
X
X
X
X
X
X
X
4
2
2
2
1
2
4
1
4
4
4
1
X
4
4
4
4
2
4
4
4
4
2
1
1
3
1
4
4
4
1
4
X
X
4
2
1
3
4
4
4
4
4
4
1
2
4
1
4
3
4
1
X
4
4
X
4
2
4
4
4
4
4
1
1
4
1
4
4
4
2
4
X
X
4
4
1
4
4
4
2
1
1
1
4
4
3
4
4
4
4
4
X
4
4
X
4
4
3
4
4
4
X
4
4
X
4
4
4
4
X
4
X
X
4
4
4
2
4
4
4
1
2
3
4
3
2
4
4
4
4
4
X
4
4
X
4
2
2
4
4
2
X
4
4
X
4
X
4
3
X
3
X
X
3
4
4
1
4
4
4
4
4
4
1
2
4
1
2
2
2
1
X
4
4
4
2
2
4
4
3
3
2
1
1
4
1
4
4
4
1
4
X
X
4
2
1
4
4
4
4
4
4
4
1
2
4
1
4
3
4
1
X
4
4
4
4
2
2
4
4
4
4
1
1
4
1
4
4
4
2
4
X
X
4
4
1
4
4
4
4
4
4
4
1
2
4
1
4
3
4
1
X
4
4
4
4
2
1
4
4
4
4
1
1
4
1
1
4
4
2
4
X
X
4
4
1
4
4
4
4
4
4
4
1
2
4
1
4
3
4
1
X
4
4
4
4
2
4
4
4
4
4
1
1
4
1
4
4
4
2
4
X
X
4
4
1
4
4
4
4
2
4
2
1
3
4
1
4
4
4
1
X
4
4
4
4
2
4
4
4
4
2
1
1
3
1
4
4
4
2
4
X
X
4
4
1
4
4
4
1
1
1
3
1
4
3
1
4
4
4
1
X
1
1
1
4
4
1
2
4
3
1
1
1
X
1
2
2
2
1
2
X
X
2
4
1
1
2
2
4
4
4
4
2
2
4
2
2
2
2
2
X
4
4
X
4
2
4
4
4
4
X
2
2
3
2
4
4
X
X
X
X
X
X
4
2
4
4
4
V1164-75
N0674-70
N0674-70
N0674-70
E0540-80
E0540-80
V3819-75
E0540-80
E0540-80
E0540-80
E0540-80
E0540-80
V3819-75
V1164-75
V1164-75
V1164-75
E0540-80
N0674-70
N0674-70
V1164-75
E0540-80
Factory
V1164-75
N0674-70
E0540-80
V1164-75
E0540-80
E0540-80
V1164-75
V1164-75
E0540-80
V1164-75
E0540-80
V3819-75
V1164-75
E0540-80
E0540-80
N0674-70
V1164-75
V1164-75
7-21
Seals
AFLAS
Neoprene
Polyacrylate
Polyurethane
Butyl
Fluorosilicone
Silicone
Nitrile NBR
5700 Handbook
Fluorocarbon FKM
Hifluor FKM
Perfluoroelastomer FFKM
Neoprene/Chloroprene CR
Styrene-Butadiene SBR
Polyacrylate ACM
Polyurethane AU, EU
Butyl IIR
Butadiene BR
Isoprene IR
Natural Rubber NR
Hypalon CSM
Fluorosilicone FVMQ
V1164-75
V1164-75
E0540-80
V1164-75
V1164-75
E0540-80
V1164-75
V8545-75
V3819-75
V1164-75
V3819-75
E0540-80
V1164-75
E0540-80
4
2
1
4
4
1
4
4
3
4
X
4
2
3
4
2
1
4
4
1
4
4
3
4
X
4
2
3
2
4
1
3
3
1
3
3
2
3
X
2
4
1
1
1
4
1
1
1
1
4
4
1
X
4
1
3
1
1
2
1
1
1
1
1
4
1
1
1
1
1
1
1
2
1
1
1
1
1
2
1
1
1
1
1
X
X
X
X
X
X
X
X
X
X
X
X
X
X
2
4
1
4
4
1
4
4
4
4
X
X
4
1
2
4
2
4
4
1
4
4
4
4
X
4
4
1
4
4
4
4
4
4
4
4
4
4
X
X
4
4
4
3
4
4
4
2
4
4
4
4
X
X
3
4
2
4
1
3
3
1
3
3
2
3
X
2
4
1
2
4
2
4
4
1
4
4
4
4
X
X
4
1
2
4
1
4
4
1
4
4
4
4
X
X
4
1
2
4
1
4
4
1
4
4
4
4
X
X
4
1
2
4
2
4
4
1
4
4
4
4
X
X
4
1
2
2
4
3
3
1
3
4
4
3
X
X
2
1
3
X
1
4
4
1
4
4
4
4
X
X
X
2
E0540-80
E0540-80
V1164-75
N0674-70
E0540-80
E0540-80
E0540-80
N0674-70
E0540-80
E0540-80
N0674-70
N0674-70
N0674-70
E0540-80
E0540-80
E0540-80
N0674-70
E0540-80
E0540-80
E0540-80
V1164-75
E0540-80
V3819-75
V3819-75
V1164-75
1
1
2
1
1
3
3
1
3
3
1
1
1
3
3
3
X
3
3
3
2
X
X
X
4
1
1
2
1
1
3
3
1
3
3
1
1
1
3
3
3
X
3
3
3
2
X
X
X
4
1
1
3
1
1
1
1
1
1
1
1
1
1
1
1
1
X
1
1
1
4
2
1
X
4
1
1
1
1
2
3
3
1
3
3
1
1
1
3
3
3
X
3
3
3
1
X
X
X
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
X
1
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
X
1
2
2
X
X
X
X
X
X
X
X
X
X
X
1
1
X
X
X
X
X
X
X
X
X
X
X
X
1
1
2
1
1
1
1
2
1
1
1
1
1
1
1
1
X
1
1
1
4
X
X
X
X
1
1
4
4
4
1
1
1
1
1
1
X
X
1
1
1
X
1
1
1
4
X
X
X
X
1
1
X
X
X
4
4
1
4
4
1
X
X
4
4
4
X
4
4
4
4
X
X
X
X
1
1
X
X
X
4
4
1
4
4
1
X
X
4
4
4
X
4
4
4
3
X
X
X
X
1
1
3
1
1
1
1
1
1
1
1
X
X
1
1
1
X
1
1
1
4
X
X
X
X
1
1
4
X
X
1
1
1
1
1
1
X
X
1
1
1
X
1
1
1
4
X
X
X
X
1
1
4
X
X
1
1
1
1
1
1
X
X
1
1
1
X
1
1
1
4
X
X
X
X
1
1
4
X
X
1
1
1
1
1
1
X
X
1
1
1
X
1
1
1
4
X
X
X
X
1
1
2
1
1
1
1
2
1
1
1
X
X
1
1
1
X
1
1
1
4
X
X
X
X
1
1
X
1
2
1
1
1
1
1
1
X
X
1
1
1
X
1
1
1
2
X
X
X
X
4
4
3
1
1
2
2
2
2
2
2
X
X
2
2
2
X
2
2
2
X
X
X
X
X
7-22
Seals
AFLAS
Neoprene
Polyacrylate
Polyurethane
Butyl
Fluorosilicone
Silicone
Nitrile NBR
5700 Handbook
Fluorocarbon FKM
Hifluor FKM
Perfluoroelastomer FFKM
Neoprene/Chloroprene CR
Styrene-Butadiene SBR
Polyacrylate ACM
Polyurethane AU, EU
Butyl IIR
Butadiene BR
Isoprene IR
Natural Rubber NR
Hypalon CSM
Fluorosilicone FVMQ
2
1
X
X
1
X
1
X
3
3
X
4
2
1
1
1
2
1
2
2
2
X
X
X
1
X
1
1
X
2
X
4
1
4
4
X
4
1
2
2
2
X
X
X
1
X
1
X
3
3
X
4
2
1
X
1
2
1
2
2
2
X
X
X
1
X
1
1
X
2
X
4
X
4
4
X
4
1
2
2
4
1
1
X
1
X
2
X
2
1
1
4
4
4
X
1
4
1
3
4
4
X
X
X
1
X
1
1
X
4
X
4
1
3
4
X
1
1
1
4
1
X
X
X
2
X
2
X
4
3
4
2
1
2
X
1
2
2
3
1
1
X
X
X
1
X
1
1
X
2
X
4
1
4
2
X
4
4
2
1
1
1
2
1
1
1
1
1
1
1
1
2
1
4
4
2
2
2
2
1
1
4
2
2
1
4
2
1
1
4
4
1
1
1
1
1
2
2
2
2
1
1
2
1
1
1
1
1
1
1
1
2
1
3
3
2
2
2
2
1
1
4
2
2
1
3
2
1
1
3
3
1
1
1
1
1
2
2
2
2
X
X
X
X
X
X
1
X
X
X
3
X
X
X
4
X
X
X
X
X
X
X
X
X
X
X
X
X
X
4
X
X
X
X
X
X
X
X
X
X
4
X
X
X
1
X
1
X
3
1
1
4
2
1
X
1
2
1
1
3
3
X
X
X
1
X
1
1
X
1
X
3
X
1
2
X
1
1
1
2
4
X
X
X
4
X
X
X
3
1
X
4
4
2
X
1
4
1
1
4
4
X
X
X
1
X
1
1
X
X
X
4
X
1
4
X
2
1
1
4
4
X
X
X
X
X
X
X
4
4
X
4
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
2
2
X
X
X
X
X
3
X
X
X
X
X
X
X
4
4
X
X
X
1
X
X
X
X
1
X
X
X
X
X
X
X
X
1
X
X
X
X
X
4
X
X
X
X
X
X
4
X
X
X
1
X
X
X
2
1
X
4
4
4
X
1
4
1
3
4
4
X
X
X
1
X
1
1
X
X
X
4
X
3
4
X
1
1
1
4
4
X
X
X
X
X
X
X
2
1
X
X
X
X
X
X
X
X
4
4
4
X
X
X
X
X
X
X
X
X
X
4
X
X
X
X
X
X
X
X
4
X
X
X
X
X
X
X
2
1
X
X
X
X
X
X
X
X
4
4
4
X
X
X
1
X
X
X
X
X
X
4
X
X
X
X
X
X
X
X
4
X
X
X
X
X
X
X
2
1
X
4
4
4
X
1
4
1
2
4
4
X
X
X
1
X
1
1
X
X
X
4
X
1
4
X
2
1
1
4
4
X
X
X
1
X
X
X
2
1
X
1
2
1
X
X
1
X
1
2
2
X
X
X
1
X
1
1
X
X
X
4
X
1
X
X
2
1
X
2
2
X
X
X
2
X
X
X
4
1
X
2
X
X
X
X
X
X
3
2
2
X
X
X
4
X
2
X
X
X
X
X
X
4
2
X
X
X
X
X
X
X
X
X
1
X
X
X
2
2
X
4
4
4
X
4
4
X
4
4
4
X
X
X
4
X
4
4
X
X
X
4
X
4
4
X
X
X
X
4
V1164-75
N0674-70
E0540-80
V8545-75
E0540-80
V3819-75
N0674-70
V3819-75
E0540-80
E0540-80
E0540-80
V3819-75
V1164-75
C0873-70
N0674-70
C0873-70
C0873-70
C0873-70
C0873-70
V1164-75
V1164-75
C0873-70
C0873-70
V3819-75
C0873-70
C0873-70
N0674-70
C0873-70
V8545-75
V1164-75
V3819-75
V8545-75
N0674-70
C0873-70
C0873-70
V8545-75
C0873-70
C0873-70
C0873-70
V1164-75
7-23
Seals
AFLAS
Neoprene
Polyacrylate
Polyurethane
Butyl
Fluorosilicone
Silicone
Nitrile NBR
5700 Handbook
Fluorocarbon FKM
Hifluor FKM
Perfluoroelastomer FFKM
Neoprene/Chloroprene CR
Styrene-Butadiene SBR
Polyacrylate ACM
Polyurethane AU, EU
Butyl IIR
Butadiene BR
Isoprene IR
Natural Rubber NR
Hypalon CSM
Fluorosilicone FVMQ
N0674-70
C0873-70
C0873-70
C0873-70
N0674-70
N0674-70
N0674-70
N0674-70
N0674-70
V1164-75
N0674-70
V1164-75
V1164-75
N0674-70
N0674-70
N0674-70
V1164-75
E0540-80
V1164-75
E0540-80
E0540-80
E0540-80
V3819-75
E0540-80
E0540-80
E0540-80
V3819-75
1
1
1
1
2
1
1
1
1
2
1
2
2
1
1
1
4
4
4
4
4
4
X
4
4
4
4
X
1
1
1
2
1
X
X
1
X
X
X
2
1
1
1
4
4
4
4
4
4
X
4
4
4
4
1
1
1
1
4
4
2
2
4
3
1
2
4
4
4
2
4
2
3
2
2
2
X
2
1
1
2
1
2
4
4
2
2
3
1
2
1
1
1
1
1
1
1
1
4
1
4
4
X
X
X
1
1
4
2
2
4
4
2
1
2
2
2
2
2
2
1
1
1
1
1
2
1
1
1
1
1
X
1
1
1
2
2
4
4
2
1
2
2
2
2
2
2
1
1
1
1
1
2
1
1
1
1
1
X
1
1
1
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
4
X
X
X
X
X
X
X
1
2
X
1
1
1
4
1
X
X
1
X
X
X
4
2
2
2
4
4
4
4
4
4
X
4
4
X
4
X
1
1
1
4
2
X
X
2
X
X
X
4
4
4
2
4
X
4
4
4
4
X
4
4
X
X
X
X
X
X
X
X
X
X
X
X
X
X
1
1
1
4
4
X
4
4
4
4
X
4
4
X
X
X
X
X
X
3
1
X
X
1
X
X
X
2
2
2
X
4
X
X
3
3
4
X
4
4
X
X
X
1
1
1
4
4
X
X
4
X
X
X
4
4
4
4
4
X
4
2
2
2
X
2
1
X
X
X
X
X
X
X
X
X
X
X
X
X
X
4
4
4
2
4
X
4
4
4
4
X
4
4
X
X
X
X
X
X
X
X
X
X
X
X
X
X
4
4
4
1
4
X
4
4
4
4
X
4
4
X
X
X
1
2
1
4
4
X
X
4
X
X
X
4
4
4
3
4
X
4
4
4
4
X
4
4
X
X
X
1
1
4
1
1
X
X
1
X
X
X
4
3
4
2
4
X
4
3
3
4
X
4
4
X
X
X
X
X
X
X
X
X
X
X
X
X
X
1
1
1
1
X
X
X
X
X
4
X
4
2
X
X
X
X
X
X
4
4
X
X
4
X
X
X
1
4
1
2
4
X
X
4
4
4
X
4
1
X
X
V1164-75
N0497-70
N0674-70
V3819-75
E0603-70
V1164-75
E0540-80
N0674-70
V3819-75
E0540-80
N0674-70
E0540-80
2
1
1
X
3
4
3
1
X
3
1
3
2
1
1
X
3
4
3
1
X
3
1
3
2
4
1
X
1
2
1
1
X
1
1
1
1
1
1
X
4
1
3
1
X
3
1
3
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
X
X
X
X
X
X
X
X
X
X
X
X
2
4
1
X
2
2
1
1
X
1
1
1
2
4
1
X
1
4
1
1
X
1
1
1
4
4
4
X
X
4
4
X
X
4
4
4
4
2
4
X
X
X
4
4
X
4
4
4
2
4
1
X
2
2
1
1
X
1
1
1
X
4
1
X
X
4
1
1
X
1
1
1
1
4
1
X
X
2
1
1
X
1
1
1
1
4
1
X
X
2
1
1
X
1
1
1
2
4
1
X
2
2
1
1
X
1
1
1
1
1
1
X
4
1
1
1
X
1
1
1
X
4
1
X
X
X
2
1
X
2
1
2
7-24
Seals
AFLAS
Neoprene
Polyacrylate
Polyurethane
Butyl
Fluorosilicone
Silicone
Nitrile NBR
5700 Handbook
Fluorocarbon FKM
Hifluor FKM
Perfluoroelastomer FFKM
Neoprene/Chloroprene CR
Styrene-Butadiene SBR
Polyacrylate ACM
Polyurethane AU, EU
Butyl IIR
Butadiene BR
Isoprene IR
Natural Rubber NR
Hypalon CSM
Fluorosilicone FVMQ
E0540-80
E0540-80
E0540-80
E0540-80
E0540-80
V3819-75
E0540-80
E0540-80
E0540-80
N0674-70
E0540-80
N0674-70
N0674-70
E0540-80
E0540-80
N0674-70
N0674-70
N0674-70
N0674-70
N0674-70
N0674-70
3
3
3
3
3
X
3
1
3
1
2
1
1
1
4
1
1
1
1
1
1
3
3
3
3
3
X
3
1
3
1
2
1
1
1
4
1
1
1
1
1
1
1
1
1
1
1
X
1
1
1
4
1
4
4
1
2
4
4
4
4
4
4
3
3
3
3
3
X
3
1
3
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
1
1
1
1
1
X
1
1
1
3
2
2
2
1
4
2
2
2
2
2
2
1
1
1
1
1
X
1
1
1
4
2
4
4
1
4
4
4
4
4
4
4
4
4
4
4
4
X
4
4
4
1
4
1
1
4
4
1
1
1
1
1
1
4
4
4
4
4
X
4
4
4
1
4
1
1
2
4
1
1
1
2
2
1
1
1
1
1
1
X
1
1
1
4
1
4
4
1
2
4
4
4
4
4
4
1
1
1
1
1
X
1
1
1
4
2
4
4
1
4
4
4
4
4
4
4
1
1
1
1
1
X
1
1
1
4
2
4
4
1
4
4
4
4
4
4
4
1
1
1
1
1
X
1
1
1
4
2
4
4
1
4
4
4
4
4
4
4
1
1
1
1
1
X
1
1
1
4
2
4
4
1
4
4
4
4
4
4
4
1
1
1
1
1
X
1
1
1
1
2
1
1
1
2
1
1
1
1
1
1
2
2
2
2
2
X
2
1
2
4
X
4
4
1
1
4
4
4
4
4
4
V1164-75
V1164-75
N0674-70
N0674-70
V1164-75
B0612-70
V1164-75
V1164-75
N0674-70
N0674-70
N0674-70
E0540-80
V1164-75
V1164-75
V1164-75
V3819-75
V3819-75
V3819-75
4
4
1
1
2
1
2
2
1
1
1
3
2
2
2
X
X
X
4
4
1
1
2
1
2
2
1
1
1
3
2
2
2
X
X
X
4
4
4
1
4
1
4
4
4
4
4
1
4
4
4
X
X
X
1
1
1
X
1
1
1
1
1
1
1
3
1
1
1
X
X
X
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
4
4
1
2
4
1
4
4
2
2
2
1
4
4
4
X
X
X
4
4
2
1
4
1
4
4
4
4
4
1
4
4
4
X
X
X
4
X
1
4
4
1
4
4
1
1
1
4
4
4
4
X
X
X
4
X
1
4
4
1
3
3
1
2
1
4
3
3
3
X
X
X
4
4
4
1
4
1
4
4
4
4
4
1
4
4
4
X
X
X
4
4
4
1
4
1
4
4
4
4
4
1
4
4
4
X
X
X
4
4
4
1
4
1
4
4
4
4
4
1
4
4
4
X
X
X
4
4
4
1
4
1
4
4
4
4
4
1
4
4
4
X
X
X
4
4
1
1
4
1
4
4
2
2
2
1
4
4
4
X
X
X
2
1
1
1
2
1
2
2
1
3
1
1
2
2
2
X
X
X
4
4
2
1
4
1
X
X
2
4
2
2
X
X
X
X
X
X
7-25
Seals
AFLAS
Neoprene
Polyacrylate
Polyurethane
Butyl
Fluorosilicone
Silicone
Nitrile NBR
5700 Handbook
Fluorocarbon FKM
Hifluor FKM
Perfluoroelastomer FFKM
Neoprene/Chloroprene CR
Styrene-Butadiene SBR
Polyacrylate ACM
Polyurethane AU, EU
Butyl IIR
Butadiene BR
Isoprene IR
Natural Rubber NR
Hypalon CSM
Fluorosilicone FVMQ
X
4
X
1
2
3
3
1
2
3
1
1
3
2
1
1
4
4
4
4
1
1
1
1
1
2
2
4
3
3
2
X
4
4
1
4
4
2
2
4
X
4
X
1
2
3
3
1
2
3
1
1
3
2
1
1
4
4
4
4
1
1
1
1
1
2
2
4
3
3
2
X
4
4
1
X
X
2
2
4
X
1
X
4
4
1
1
4
4
1
4
3
1
4
1
1
1
1
1
2
1
1
4
1
4
4
1
2
1
1
4
X
1
1
4
3
3
1
2
4
X
4
X
1
1
3
3
1
1
3
1
1
3
1
1
1
4
1
1
1
2
X
1
2
1
1
4
4
3
3
1
X
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
X
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
X
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
2
X
X
X
X
X
X
X
1
X
X
X
X
X
1
X
2
4
1
1
2
2
1
2
2
1
4
2
2
4
4
4
4
2
X
2
2
2
4
2
2
1
1
4
X
4
2
2
4
4
2
X
4
X
4
X
4
4
1
1
4
4
1
4
1
1
4
1
1
4
4
4
4
1
X
4
1
4
4
2
1
1
1
4
X
4
4
4
X
4
3
X
4
X
X
X
1
4
4
4
1
1
4
1
4
4
4
4
4
4
4
4
4
4
X
4
4
1
4
X
4
4
4
4
X
4
4
1
X
4
3
X
4
X
2
X
1
3
4
4
2
2
4
1
4
4
3
4
4
4
X
X
4
4
X
4
4
1
3
4
4
4
4
3
X
4
4
2
X
3
4
X
4
X
2
X
4
4
1
1
4
4
1
4
3
1
4
1
1
2
1
1
1
2
X
4
2
4
4
1
2
1
1
4
X
1
1
4
X
4
1
X
4
X
4
X
4
4
1
1
4
4
1
4
1
1
4
2
2
4
4
4
4
X
X
4
X
4
4
X
4
1
1
4
X
4
4
4
X
4
X
X
X
X
4
X
4
4
1
1
4
4
1
4
1
1
4
X
X
4
4
4
4
X
X
4
X
4
4
X
4
1
1
4
X
1
1
4
X
4
X
X
X
X
4
X
4
4
1
1
4
4
1
4
1
1
4
X
X
4
4
4
4
X
X
4
X
4
4
1
4
1
1
4
X
1
1
4
X
4
3
X
4
X
3
X
2
4
1
1
2
2
1
2
2
1
4
X
X
4
4
4
4
X
X
4
X
2
4
2
2
1
1
4
X
1
1
3
X
4
1
X
X
X
4
X
1
2
1
1
3
4
1
1
2
1
2
2
2
3
2
2
2
2
X
2
2
1
2
4
4
1
1
2
X
3
3
1
X
2
3
X
4
X
2
X
2
X
2
2
4
4
2
2
2
2
X
1
1
3
3
3
3
2
X
3
2
2
X
2
X
2
2
X
X
4
4
4
X
X
4
X
4
V3819-75
E0540-80
V8545-75
N0674-70
V1164-75
E0540-80
E0540-80
N0674-70
V1164-75
E0540-80
N0674-70
N0674-70
E0540-80
V1164-75
N0674-70
N0674-70
E0540-80
E0540-80
E0540-80
V1164-75
N0674-70
N0674-70
N0674-70
N0674-70
N0674-70
V1164-75
E0540-80
E0540-80
E0540-80
E0540-80
V1164-75
V3819-75
E0540-80
E0540-80
N0674-70
V1164-75
V1164-75
V1164-75
V0834-70
V1164-75
7-26
Seals
AFLAS
Neoprene
Polyacrylate
Polyurethane
Butyl
Fluorosilicone
Silicone
Nitrile NBR
5700 Handbook
Fluorocarbon FKM
Hifluor FKM
Perfluoroelastomer FFKM
Neoprene/Chloroprene CR
Styrene-Butadiene SBR
Polyacrylate ACM
Polyurethane AU, EU
Butyl IIR
Butadiene BR
Isoprene IR
Natural Rubber NR
Hypalon CSM
Fluorosilicone FVMQ
E0540-80
N0674-70
N0674-70
V3819-75
V3819-75
V3819-75
E0540-80
V3819-75
V3819-75
E0540-80
V3819-75
V3819-75
E0540-80
E0540-80
E0540-80
V3819-75
V1164-75
V1164-75
V3819-75
E0540-80
E0540-80
E0540-80
E0540-80
N0674-70
V1164-75
V1164-75
V1164-75
E0540-80
E0540-80
E1235-80
E1235-80
E1235-80
E1235-80
V0834-70
2
1
1
X
X
4
2
X
X
4
X
X
4
1
1
X
2
4
X
1
4
4
4
1
X
4
3
3
2
4
4
4
4
4
2
1
1
X
X
X
2
X
X
X
X
X
4
1
1
X
2
4
X
1
4
4
4
1
X
4
3
3
2
4
4
X
4
4
1
4
4
X
X
4
1
X
X
1
X
X
1
1
1
X
1
3
X
1
1
1
1
1
X
4
2
1
1
1
1
1
1
2
1
1
1
X
X
3
1
X
X
1
X
X
4
1
1
X
1
1
X
4
4
4
4
1
1
1
2
3
4
4
4
4
4
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
X
X
X
X
X
X
X
X
X
1
X
X
2
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
2
X
2
2
X
2
2
2
X
X
X
2
X
X
2
X
X
X
1
1
X
1
4
X
1
2
1
2
2
4
4
4
1
2
4
4
4
4
4
2
4
4
X
X
X
2
X
X
X
X
X
4
2
2
X
2
4
X
1
4
4
4
1
4
X
4
1
2
X
4
X
X
4
4
1
1
X
X
X
X
X
X
X
X
X
4
2
2
X
4
4
X
4
4
4
4
4
4
X
4
4
4
X
4
X
X
4
X
2
2
X
X
X
X
X
X
X
X
X
X
1
1
X
X
X
X
X
X
X
X
4
3
X
X
4
X
X
4
X
X
X
1
4
4
X
X
X
1
X
X
X
X
X
1
1
1
X
1
3
X
1
1
1
1
2
4
X
4
1
2
X
2
X
X
2
2
4
4
X
X
X
X
X
X
X
X
X
4
1
1
X
2
4
X
1
4
4
4
X
4
X
4
1
2
X
4
X
X
4
1
4
4
X
X
X
1
X
X
X
X
X
4
1
1
X
2
4
X
1
4
4
4
X
4
X
2
1
2
X
4
X
X
2
1
4
4
X
X
X
1
X
X
X
X
X
4
2
2
X
2
4
X
1
4
4
4
X
4
X
2
1
2
X
4
X
X
2
1
4
4
X
X
X
1
X
X
X
X
X
X
1
1
X
2
3
X
1
3
2
3
X
4
X
4
1
X
X
4
X
X
1
2
1
1
X
X
X
4
X
X
X
X
X
4
3
3
X
1
2
X
3
3
3
3
2
2
X
2
1
4
X
4
X
X
X
3
2
2
X
X
X
4
X
X
X
X
X
X
3
3
X
1
2
X
3
3
3
3
2
X
X
X
2
4
X
4
X
X
X
V1164-75
N0674-70
N0674-70
N0674-70
N0674-70
X
1
1
1
1
X
1
1
1
1
X
4
4
4
4
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
X
X
X
X
X
4
2
2
2
2
4
4
4
4
4
4
1
1
1
1
3
2
2
2
2
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
2
1
1
1
1
X
4
4
4
4
7-27
Seals
AFLAS
Neoprene
Polyacrylate
Polyurethane
Butyl
Fluorosilicone
Silicone
Nitrile NBR
5700 Handbook
Fluorocarbon FKM
Hifluor FKM
Perfluoroelastomer FFKM
Neoprene/Chloroprene CR
Styrene-Butadiene SBR
Polyacrylate ACM
Polyurethane AU, EU
Butyl IIR
Butadiene BR
Isoprene IR
Natural Rubber NR
Hypalon CSM
Fluorosilicone FVMQ
E0540-80
E0540-80
V1164-75
Factory
V1164-75
E0540-80
E0540-80
E0540-80
V1164-75
N0674-70
E0540-80
E0540-80
V1164-75
V3819-75
E0540-80
E0540-80
E0540-80
V1164-75
E0540-80
N0674-70
V1164-75
N0674-70
N0674-70
N0674-70
N0674-70
N0674-70
E0540-80
E0540-80
E0540-80
E0540-80
V1164-75
N0674-70
E0540-80
E0540-80
3
3
2
4
X
3
3
3
X
1
3
2
4
2
3
4
3
X
3
1
X
1
1
1
1
1
4
2
4
2
4
2
3
3
3
3
2
4
X
3
3
3
X
1
3
2
4
2
3
4
3
X
2
1
X
1
1
1
1
1
4
2
4
2
4
2
3
3
1
1
2
4
4
1
1
1
X
4
1
1
4
4
1
1
1
X
2
2
X
4
4
4
4
4
2
1
2
1
4
4
1
1
3
3
1
4
1
3
3
3
1
1
3
1
1
4
3
1
3
1
4
4
1
1
1
1
1
1
4
1
4
1
1
4
3
3
1
1
1
2
1
2
2
2
1
1
2
1
1
2
2
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
X
X
X
X
X
X
X
X
X
X
X
X
4
4
X
X
X
X
4
3
X
X
X
X
X
X
X
X
X
X
X
X
X
X
1
1
4
4
4
1
1
1
4
2
1
1
4
3
1
4
1
4
3
4
4
2
2
2
2
2
4
2
4
2
4
3
1
1
1
1
2
4
4
1
1
1
4
4
1
2
X
X
1
4
1
4
X
X
4
4
4
4
4
4
4
2
4
2
4
4
1
1
4
4
X
4
4
4
4
4
4
1
4
4
X
X
4
4
4
4
X
X
4
1
4
1
1
1
4
4
4
4
4
3
4
4
4
4
X
4
3
4
4
4
3
1
4
4
X
X
4
X
4
3
X
X
3
1
X
1
2
1
4
4
4
4
4
2
4
4
1
1
2
4
4
1
1
1
4
4
1
1
X
X
1
1
1
4
X
X
4
4
4
4
4
4
2
1
2
1
4
4
1
1
1
1
X
4
4
1
1
1
4
4
1
2
X
X
1
4
1
4
X
X
4
4
4
4
4
4
4
2
4
2
4
4
1
1
1
1
4
4
4
1
1
1
4
4
1
1
X
X
1
4
1
4
X
X
4
4
4
4
4
4
4
1
4
1
4
4
1
1
1
1
X
4
4
1
1
1
4
4
1
1
X
X
1
4
1
4
X
X
4
4
4
4
4
4
4
1
4
1
4
4
1
1
1
1
2
4
4
1
1
1
4
2
1
1
X
X
1
4
1
4
X
X
4
2
2
2
1
2
4
1
4
1
4
3
1
1
1
1
1
4
2
1
1
1
2
1
1
2
X
X
1
1
1
2
X
X
2
1
1
1
1
1
4
2
2
2
2
3
1
1
2
2
X
4
X
2
2
2
X
2
2
1
X
X
2
X
2
X
X
2
X
2
4
2
4
2
4
1
4
1
4
4
2
2
V1164-75
V1164-75
N0674-70
N0602-70
N0602-70
2
3
1
1
1
2
3
1
1
1
4
4
4
4
4
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
X
X
2
X
X
4
4
4
4
4
4
4
X
4
4
4
4
X
2
2
3
3
X
2
2
4
4
X
4
4
4
X
X
4
4
4
X
X
4
4
4
4
X
4
4
4
X
X
4
4
2
1
X
2
2
X
4
X
4
4
7-28
Seals
AFLAS
Neoprene
Polyacrylate
Polyurethane
Butyl
Fluorosilicone
Silicone
Nitrile NBR
5700 Handbook
Fluorocarbon FKM
Hifluor FKM
Perfluoroelastomer FFKM
Neoprene/Chloroprene CR
Styrene-Butadiene SBR
Polyacrylate ACM
Polyurethane AU, EU
Butyl IIR
Butadiene BR
Isoprene IR
Natural Rubber NR
Hypalon CSM
Fluorosilicone FVMQ
N0602-70
N0602-70
V1164-75
V1164-75
N0674-70
1
1
3
4
1
1
1
3
4
1
4
4
4
4
4
1
1
1
1
4
1
1
1
1
1
1
1
1
1
1
X
X
X
X
2
4
3
4
4
2
4
4
4
4
X
2
1
4
4
X
2
1
3
4
X
4
4
4
4
X
4
X
X
X
X
4
X
X
X
X
4
4
4
4
X
4
X
X
X
X
2
2
2
2
X
4
4
4
4
X
E0540-80
N0674-70
N0674-70
1
1
1
1
1
1
1
4
4
2
1
1
1
1
1
1
1
1
X
X
X
X
2
4
1
4
4
X
1
1
X
1
1
1
4
4
X
4
4
X
4
4
X
4
4
1
4
4
2
1
1
1
4
4
V3819-75
V3819-75
E0540-80
N0674-70
V1164-75
E0540-80
N0674-70
N0674-70
V1164-75
N0674-70
V3819-75
E0540-80
E0540-80
V3819-75
E0540-80
E0540-80
E0540-80
E0540-80
E0540-80
E0540-80
V3819-75
N0674-70
E0540-80
C0873-70
N0674-70
N0674-70
N0674-70
N0674-70
N0674-70
V1164-75
4
4
4
1
4
4
1
1
2
1
X
2
3
X
3
3
3
3
3
3
X
1
3
2
1
1
1
1
1
X
4
4
4
1
4
4
1
1
2
1
X
2
3
X
3
3
3
3
3
3
X
1
3
2
1
1
1
1
1
X
4
4
2
1
4
2
2
4
4
1
X
1
1
X
1
1
1
1
1
1
X
1
1
1
4
4
4
4
1
X
4
4
4
1
1
4
1
1
1
1
X
4
3
X
3
3
3
3
3
3
X
X
3
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
X
X
X
X
X
X
X
X
1
1
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
1
X
1
X
4
4
2
1
4
4
2
2
4
1
X
2
1
X
1
1
1
1
1
1
X
1
1
1
2
2
4
2
1
4
4
4
4
1
4
4
4
4
X
X
X
4
1
X
1
1
1
1
1
1
X
1
1
2
4
4
X
4
X
4
4
4
X
4
4
4
1
1
X
X
X
4
4
X
4
4
4
4
4
4
X
X
4
4
1
1
X
1
X
4
4
4
X
X
X
4
1
1
X
X
X
4
4
X
4
4
4
4
4
4
X
X
4
X
1
1
X
2
X
3
4
4
2
1
4
2
2
4
X
X
X
1
1
X
1
1
1
1
1
1
X
1
1
1
4
4
X
4
X
4
4
4
4
1
4
4
4
4
X
X
X
4
1
X
1
1
1
1
1
1
X
1
1
2
4
4
X
4
X
4
4
4
4
1
4
4
4
4
X
X
X
1
1
X
1
1
1
1
1
1
X
1
1
2
4
4
X
4
X
4
4
4
4
1
4
4
4
4
X
X
X
1
1
X
1
1
1
1
1
1
X
1
1
2
4
4
X
4
X
4
4
4
2
1
3
4
4
2
X
X
X
4
1
X
1
1
1
1
1
1
X
1
1
1
2
2
X
3
X
4
4
4
4
1
2
4
1
1
X
X
X
4
1
X
1
1
1
1
1
1
X
1
1
1
1
1
X
1
X
2
4
4
X
1
2
2
2
2
X
X
X
4
2
X
2
2
2
2
2
2
X
2
2
2
4
4
X
4
X
X
7-29
Seals
AFLAS
Neoprene
Polyacrylate
Polyurethane
Butyl
Fluorosilicone
Silicone
Nitrile NBR
5700 Handbook
Fluorocarbon FKM
Hifluor FKM
Perfluoroelastomer FFKM
Neoprene/Chloroprene CR
Styrene-Butadiene SBR
Polyacrylate ACM
Polyurethane AU, EU
Butyl IIR
Butadiene BR
Isoprene IR
Natural Rubber NR
Hypalon CSM
Fluorosilicone FVMQ
E0540-80
S0604-70
N0674-70
Factory
N0674-70
N0674-70
E0540-80
E0540-80
E0540-80
E0540-80
E0540-80
E0540-80
E0540-80
E0540-80
E0540-80
E0540-80
E0540-80
V1164-75
V1164-75
V1164-75
N0674-70
N0674-70
E0540-80
4
2
1
4
1
1
3
3
3
3
3
3
3
3
3
3
3
2
X
2
1
1
2
4
2
1
4
1
1
3
3
3
3
3
3
3
3
3
3
3
2
X
2
1
1
2
1
4
3
4
4
4
1
1
1
1
1
1
1
1
1
1
1
4
X
4
4
4
1
2
2
1
4
1
1
3
3
3
3
3
3
3
3
3
3
3
1
1
1
1
1
2
1
1
1
3
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
1
X
X
X
X
X
4
2
3
4
2
2
1
1
1
1
1
1
1
1
1
1
1
3
4
3
2
2
2
4
4
4
4
4
4
1
1
1
1
1
1
1
1
1
1
1
X
4
4
4
4
2
4
X
1
4
3
1
4
4
4
4
4
4
4
4
4
4
4
X
4
2
1
1
4
4
X
2
4
1
2
4
4
4
4
4
4
4
4
4
4
4
X
3
X
2
2
4
1
4
3
4
4
4
1
1
1
1
1
1
1
1
1
1
1
X
4
4
4
4
1
4
4
4
4
4
4
1
1
1
1
1
1
1
1
1
1
1
X
4
4
4
4
2
4
4
4
4
4
4
1
1
1
1
1
1
1
1
1
1
1
X
4
4
4
4
2
4
4
4
4
4
4
1
1
1
1
1
1
1
1
1
1
1
X
4
4
4
4
1
4
2
2
4
4
4
1
1
1
1
1
1
1
1
1
1
1
X
4
X
4
4
1
3
X
1
4
3
1
1
1
1
1
1
1
1
1
1
1
1
X
2
2
1
1
2
3
2
1
4
3
4
2
2
2
2
2
2
2
2
2
2
2
X
X
4
4
4
2
N0674-70
E0540-80
N0674-70
N0674-70
V3819-75
V1164-75
V1164-75
E0540-80
E0540-80
V1164-75
E0540-80
E0540-80
E0540-80
E0540-80
E0540-80
E0540-80
1
2
1
1
X
2
4
4
3
1
3
3
3
3
3
3
1
2
1
1
X
2
4
4
3
1
3
3
3
3
3
3
1
1
1
1
X
4
4
2
1
2
1
1
1
1
1
1
1
1
1
1
X
1
1
4
3
1
3
3
3
3
3
3
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
1
2
1
1
X
X
4
4
1
2
1
1
1
1
1
1
1
2
1
2
X
4
4
4
1
2
1
1
1
1
1
1
X
4
1
4
X
X
4
4
4
4
4
4
4
4
4
4
1
4
1
X
X
X
X
X
4
X
4
4
4
4
4
4
1
1
1
1
X
4
4
2
1
4
1
1
1
1
1
1
1
2
1
2
X
4
4
4
1
2
1
1
1
1
1
1
1
2
1
2
X
4
4
4
1
1
1
1
1
1
1
1
1
2
1
2
X
4
4
4
1
3
1
1
1
1
1
1
1
1
1
1
X
X
4
4
1
2
1
1
1
1
1
1
1
X
1
1
X
2
X
X
1
1
1
1
1
1
1
1
1
X
1
1
X
4
X
X
2
2
2
2
2
2
2
2
7-30
Seals
AFLAS
Neoprene
Polyacrylate
Polyurethane
Butyl
Fluorosilicone
Silicone
Nitrile NBR
5700 Handbook
Fluorocarbon FKM
Hifluor FKM
Perfluoroelastomer FFKM
Neoprene/Chloroprene CR
Styrene-Butadiene SBR
Polyacrylate ACM
Polyurethane AU, EU
Butyl IIR
Butadiene BR
Isoprene IR
Natural Rubber NR
Hypalon CSM
Fluorosilicone FVMQ
3
3
X
3
3
3
3
3
3
4
4
4
3
1
X
3
1
3
3
3
3
3
3
1
3
3
3
1
4
X
3
3
X
3
X
1
4
X
3
X
3
3
X
3
3
3
3
3
3
4
4
4
3
1
X
3
1
3
3
3
3
3
3
1
3
3
3
1
4
X
3
3
X
3
X
1
4
X
3
X
1
1
X
1
1
1
1
1
1
4
1
1
1
4
X
1
1
1
1
1
1
1
1
1
1
1
1
1
2
X
1
1
X
1
X
4
1
X
1
X
3
3
X
3
3
3
3
3
3
1
4
4
3
1
1
3
1
3
3
3
3
3
3
1
3
3
3
1
4
1
3
3
1
3
1
1
4
X
3
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
1
1
X
1
1
1
1
1
1
4
4
4
1
2
4
1
1
1
1
1
1
1
1
1
1
1
1
1
4
4
1
1
4
1
4
2
1
X
1
4
1
1
X
1
1
1
1
1
1
4
4
4
1
4
4
1
1
1
1
1
1
1
1
1
1
1
1
1
4
4
1
1
4
1
4
4
1
X
1
4
4
4
X
4
4
4
4
4
4
4
4
4
4
1
4
4
X
4
4
4
4
4
4
X
4
4
4
X
4
4
4
4
4
4
4
1
4
X
4
4
4
4
X
4
4
4
4
4
4
X
4
4
4
1
3
4
X
4
4
4
4
4
4
X
4
4
4
X
4
3
4
4
3
4
3
3
4
X
4
3
1
1
X
1
1
1
1
1
1
4
2
2
1
4
4
1
1
1
1
1
1
1
1
1
1
1
1
1
2
4
1
1
4
1
4
4
1
X
1
4
1
1
X
1
1
1
1
1
1
4
4
4
1
4
4
1
1
1
1
1
1
1
1
1
1
1
1
1
4
4
1
1
4
1
4
4
1
X
1
4
1
1
X
1
1
1
1
1
1
4
4
4
1
4
4
1
1
1
1
1
1
1
1
1
1
1
1
1
4
4
1
1
4
1
4
4
1
X
1
4
1
1
X
1
1
1
1
1
1
4
4
4
1
4
4
1
1
1
1
1
1
1
1
1
1
1
1
1
4
4
1
1
4
1
4
4
1
X
1
4
1
1
X
1
1
1
1
1
1
X
4
4
1
2
4
1
1
1
1
1
1
1
1
1
1
1
1
1
4
4
1
1
4
1
4
2
1
X
1
4
1
1
X
1
1
1
1
1
1
1
3
3
1
1
2
1
X
1
1
1
1
1
1
X
1
1
1
X
4
2
1
1
2
1
2
3
1
X
1
2
2
2
X
2
2
2
2
2
2
1
3
3
2
2
X
2
X
2
2
2
2
2
2
X
2
2
2
X
4
X
2
2
X
2
X
4
1
X
2
X
E0540-80
E0540-80
V3819-75
E0540-80
E0540-80
E0540-80
E0540-80
E0540-80
E0540-80
V1164-75
E1235-80
E1235-80
E0540-80
N0674-70
V1164-75
E0540-80
N0674-70
E0540-80
E0540-80
E0540-80
E0540-80
E0540-80
E0540-80
N0674-70
E0540-80
E0540-80
E0540-80
N0674-70
E0540-80
V1164-75
E0540-80
E0540-80
V1164-75
E0540-80
V1164-75
N0674-70
E0540-80
V3819-75
E0540-80
V1164-75
7-31
Seals
AFLAS
Neoprene
Polyacrylate
Polyurethane
Butyl
Fluorosilicone
Silicone
Nitrile NBR
5700 Handbook
Fluorocarbon FKM
Hifluor FKM
Perfluoroelastomer FFKM
Neoprene/Chloroprene CR
Styrene-Butadiene SBR
Polyacrylate ACM
Polyurethane AU, EU
Butyl IIR
Butadiene BR
Isoprene IR
Natural Rubber NR
Hypalon CSM
Fluorosilicone FVMQ
4
4
X
4
4
3
X
4
2
4
3
3
4
3
2
4
3
4
4
X
3
1
X
1
4
4
X
4
3
1
4
3
4
X
3
X
4
4
X
X
4
4
X
4
4
3
X
4
2
4
3
3
4
3
2
4
3
4
4
X
3
1
X
1
4
4
X
4
3
1
4
3
4
X
3
X
X
4
X
X
2
2
X
2
1
1
X
4
4
1
1
1
4
2
2
3
1
4
4
X
1
4
X
4
1
4
X
2
1
4
3
1
2
X
1
1
4
2
X
X
4
4
1
4
4
3
1
1
1
4
3
3
1
4
4
1
3
1
1
X
3
1
1
1
4
4
1
X
3
1
4
3
4
1
3
X
4
1
1
1
2
1
2
1
1
2
1
1
1
2
1
1
1
1
1
1
2
1
1
1
1
1
1
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
4
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
2
4
4
2
1
1
4
4
4
4
1
1
4
3
2
4
1
4
4
X
1
2
4
3
4
4
4
2
1
2
4
1
4
4
1
X
4
4
4
4
4
X
4
4
1
1
4
4
4
4
1
1
4
4
2
4
1
X
4
X
1
4
4
4
4
4
4
4
1
4
4
1
4
4
1
X
4
4
4
4
4
4
4
4
4
4
4
4
3
4
4
4
4
4
4
4
4
X
4
X
4
1
4
4
4
4
4
X
4
1
4
4
4
4
4
X
4
X
4
4
4
4
3
4
4
4
3
4
X
4
4
4
4
4
2
4
4
X
4
X
4
1
3
X
4
4
3
X
4
1
4
4
4
3
4
X
X
X
3
3
2
2
4
2
1
1
4
4
4
1
1
1
4
2
2
3
1
X
4
X
1
4
4
4
1
4
4
2
1
4
3
1
2
4
1
1
4
2
4
4
4
X
4
4
1
1
4
4
4
4
1
1
4
4
2
4
1
X
4
X
1
4
4
1
4
4
4
4
1
4
4
1
4
4
1
X
4
4
4
4
4
X
4
4
1
1
4
4
4
4
1
1
4
4
2
4
1
X
4
X
1
4
4
1
4
4
4
4
1
4
4
1
4
4
1
X
4
X
4
4
4
X
4
4
1
1
4
4
4
4
1
1
4
4
2
4
1
X
4
X
1
4
4
4
4
4
4
4
1
4
4
1
4
4
1
X
4
4
4
4
4
4
4
4
1
1
4
4
4
4
1
1
4
2
2
4
1
X
4
X
1
2
4
4
4
4
4
2
1
2
4
1
4
4
1
X
4
4
4
4
4
4
2
4
1
1
2
1
1
4
1
1
2
4
4
2
1
X
2
X
1
1
2
1
4
4
2
X
1
1
4
1
4
2
1
X
4
2
2
2
4
2
X
4
1
2
X
4
X
4
2
2
4
4
2
4
2
X
4
X
2
2
X
1
4
2
X
X
2
2
4
2
4
X
2
X
4
X
X
X
E0540-80
E0540-80
V1164-75
E0540-80
E0540-80
E0540-80
V1164-75
V1164-75
V1164-75
E0540-80
E0540-80
E0540-80
V1164-75
E0540-80
N0674-70
V1164-75
E0540-80
V1164-75
V1164-75
V3819-75
E0540-80
N0674-70
V1164-75
N0674-70
E0540-80
S0604-70
V1164-75
C0873-70
E0540-80
N0674-70
Factory
E0540-80
E0540-80
V1164-75
E0540-80
E0540-80
V3819-75
V1164-75
V1164-75
V1164-75
7-32
Seals
AFLAS
Neoprene
Polyacrylate
Polyurethane
Butyl
Fluorosilicone
Silicone
Nitrile NBR
5700 Handbook
Fluorocarbon FKM
Hifluor FKM
Perfluoroelastomer FFKM
Neoprene/Chloroprene CR
Styrene-Butadiene SBR
Polyacrylate ACM
Polyurethane AU, EU
Butyl IIR
Butadiene BR
Isoprene IR
Natural Rubber NR
Hypalon CSM
Fluorosilicone FVMQ
4
3
X
X
4
X
3
3
4
X
4
X
3
1
X
X
3
2
1
1
2
1
1
1
1
1
2
3
2
1
1
1
1
1
2
2
1
2
1
2
4
3
X
X
4
X
3
3
4
X
4
X
3
1
X
X
3
2
1
1
2
1
1
1
1
1
2
3
2
1
1
1
1
1
2
2
1
2
1
2
2
3
X
2
2
X
1
1
4
X
4
X
1
4
X
X
1
1
4
4
4
1
4
4
4
4
1
4
4
4
4
1
1
4
4
4
4
3
4
4
X
3
1
X
3
X
3
3
1
1
2
1
3
1
1
1
3
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
X
2
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
4
3
4
X
2
X
1
1
4
4
4
4
1
2
4
4
1
1
4
2
4
1
3
2
2
4
2
4
4
2
2
1
2
2
2
4
2
2
4
2
3
X
4
X
4
X
1
1
4
4
4
4
1
4
4
4
1
1
4
4
4
1
4
4
4
4
2
4
4
4
4
1
1
4
4
4
4
1
4
4
X
X
4
X
4
X
4
4
4
4
4
4
4
1
4
4
4
4
1
2
3
4
1
1
1
2
4
4
1
2
1
1
1
2
2
1
1
1
2
3
X
X
3
X
4
X
4
4
4
3
4
3
4
1
3
3
4
4
1
1
4
4
3
3
1
2
2
3
1
1
1
1
3
1
2
2
1
1
2
3
2
X
4
X
2
X
1
1
4
4
4
4
1
4
4
4
1
1
4
4
4
1
4
4
4
4
1
4
4
4
4
1
1
4
4
4
4
3
4
4
X
X
4
X
4
X
1
1
4
4
4
4
1
4
4
4
1
1
4
4
4
1
4
4
4
4
2
X
1
4
4
1
4
4
4
4
4
1
4
4
X
X
4
X
4
X
1
1
4
4
4
4
1
4
4
4
1
1
4
4
4
1
4
4
4
4
1
X
1
4
4
1
4
4
4
4
4
1
4
4
3
X
4
X
4
X
1
1
4
4
4
4
1
4
4
4
1
1
4
4
4
1
4
4
4
4
1
4
1
4
4
1
2
4
4
4
4
1
4
4
4
X
4
X
4
X
1
1
4
4
4
4
1
2
4
4
1
1
4
4
4
1
3
2
2
4
1
X
X
2
2
1
2
2
2
4
2
1
4
2
X
X
2
X
4
X
1
1
2
2
2
2
1
1
2
2
1
1
1
1
2
1
1
2
1
2
1
2
1
1
2
1
1
1
2
2
1
1
1
1
X
X
X
X
4
X
2
2
4
X
4
X
2
2
X
X
2
1
3
4
4
1
4
4
4
4
1
4
4
4
4
4
4
4
4
4
4
3
4
4
E0540-80
V3819-75
V1164-75
E0540-80
E0540-80
V3819-75
E0540-80
E0540-80
V1164-75
V1164-75
V1164-75
V1164-75
E0540-80
N0674-70
V1164-75
V1164-75
E0540-80
E1235-80
N0304-75
N0602-70
V1164-75
E1235-80
N0304-75
N0304-75
N0602-70
N0602-70
E1235-80
V1164-75
N0602-70
N0304-75
N0304-75
E1235-80
V1164-75
N0304-75
V1164-75
L1120-70
N0304-75
V1164-75
N0602-70
N0304-75
7-33
Seals
AFLAS
Neoprene
Polyacrylate
Polyurethane
Butyl
Fluorosilicone
Silicone
Nitrile NBR
5700 Handbook
Fluorocarbon FKM
Hifluor FKM
Perfluoroelastomer FFKM
Neoprene/Chloroprene CR
Styrene-Butadiene SBR
Polyacrylate ACM
Polyurethane AU, EU
Butyl IIR
Butadiene BR
Isoprene IR
Natural Rubber NR
Hypalon CSM
Fluorosilicone FVMQ
1
2
1
1
4
2
1
1
1
1
1
1
1
1
1
2
2
1
1
1
1
1
1
2
2
1
1
1
2
2
2
1
1
2
1
2
1
1
2
2
1
2
1
1
4
2
1
1
1
1
1
1
1
1
1
2
2
1
1
1
1
1
1
2
2
1
1
1
2
2
2
1
1
2
1
2
1
1
2
2
4
4
4
1
2
1
4
4
4
4
4
4
4
4
1
4
4
1
4
4
4
4
4
4
1
4
4
4
4
4
4
4
4
4
4
1
4
4
4
4
1
1
1
1
1
X
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
X
1
1
1
1
1
1
1
1
1
X
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
X
1
1
1
1
1
1
1
1
1
X
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
X
1
1
1
1
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
4
2
4
1
4
2
2
2
2
2
2
2
2
1
2
1
4
1
2
2
X
2
2
3
2
2
2
2
4
4
4
2
2
4
2
2
2
2
4
4
4
4
4
1
4
2
4
4
4
4
4
4
4
4
2
4
4
1
4
4
4
4
4
4
2
4
4
4
4
4
4
4
4
4
4
2
4
4
4
4
1
4
2
2
4
X
1
2
2
2
2
2
2
1
4
3
1
4
1
1
X
1
1
3
2
2
1
1
2
2
2
1
1
2
2
X
1
1
3
3
1
2
1
4
4
X
3
2
2
2
2
2
2
1
4
4
2
4
1
1
X
1
1
3
3
2
1
1
3
1
4
2
3
2
1
X
1
1
2
2
4
4
4
1
1
1
4
4
4
4
4
4
4
4
1
4
4
1
4
4
4
4
4
4
1
4
4
4
4
4
4
4
4
4
4
1
4
4
4
4
4
4
4
1
4
X
4
4
4
4
4
4
4
4
3
4
4
1
4
4
4
4
4
4
2
4
4
4
4
4
4
4
4
4
4
X
4
4
4
4
4
4
4
1
4
X
4
4
4
4
4
4
4
4
3
4
4
1
4
4
4
4
4
4
2
4
4
4
4
4
4
4
4
4
4
X
4
4
4
4
4
4
4
1
4
X
4
4
4
4
4
4
4
2
2
4
4
1
4
4
4
4
4
4
2
4
4
4
4
4
4
4
4
4
4
X
4
4
4
4
4
2
4
1
4
2
3
2
2
2
2
2
2
2
2
X
4
1
2
2
X
3
2
3
2
2
2
2
4
4
4
4
2
4
2
2
2
2
4
4
1
2
1
2
4
X
2
1
1
1
1
1
1
1
1
1
1
1
2
2
X
1
1
2
2
1
1
1
2
2
2
1
2
2
1
X
1
1
2
2
4
4
2
4
3
4
4
4
4
4
4
4
4
4
1
4
4
1
4
4
4
4
4
4
4
4
4
3
4
4
4
4
4
4
4
4
4
4
4
4
N0304-75
L1120-70
N0304-75
E1235-80
V1164-75
E1235-80
V1164-75
V1164-75
N0756-75
N0756-75
N0756-75
N0304-75
N0756-75
N0304-75
E1235-80
V1164-75
N0602-70
N0508-75
N0304-75
N0304-75
V1164-75
N0304-75
N0304-75
V1164-75
V1164-75
N0304-75
N0304-75
N0304-75
V1164-75
V1164-75
V1164-75
N0304-75
N0304-75
V1164-75
N0304-75
E1235-80
N0602-70
N0602-70
N0602-70
N0602-70
7-34
Seals
AFLAS
Neoprene
Polyacrylate
Polyurethane
Butyl
Fluorosilicone
Silicone
Nitrile NBR
5700 Handbook
Fluorocarbon FKM
Hifluor FKM
Perfluoroelastomer FFKM
Neoprene/Chloroprene CR
Styrene-Butadiene SBR
Polyacrylate ACM
Polyurethane AU, EU
Butyl IIR
Butadiene BR
Isoprene IR
Natural Rubber NR
Hypalon CSM
Fluorosilicone FVMQ
1
1
1
1
1
1
1
3
3
3
2
2
1
X
1
1
1
3
3
1
1
1
3
3
2
2
2
2
2
X
3
1
1
1
3
3
3
4
X
X
1
1
1
1
1
1
1
3
3
3
2
2
1
X
1
1
1
3
3
1
1
1
3
3
2
2
2
2
2
X
3
1
1
X
3
3
3
4
X
X
4
4
4
1
4
4
3
1
4
4
4
4
4
X
4
4
1
4
4
4
4
4
3
3
4
4
4
4
4
X
3
4
4
4
1
1
1
4
X
X
1
1
1
1
1
1
1
3
1
1
1
1
1
X
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
X
1
1
1
1
3
3
3
1
1
X
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
X
X
X
X
X
X
X
X
X
X
X
X
1
X
1
X
1
X
X
1
1
1
X
X
X
X
X
X
X
X
X
1
1
1
X
X
X
X
X
X
4
1
2
1
4
3
2
1
4
4
1
1
2
X
2
2
1
2
2
2
2
2
1
2
2
2
2
2
3
X
1
2
2
4
1
1
1
4
4
X
4
4
4
1
4
4
4
1
4
4
4
4
X
X
X
X
X
X
4
X
X
X
4
4
4
4
4
4
4
X
4
X
X
X
1
1
1
4
4
X
1
1
1
1
2
1
1
4
3
3
X
3
X
X
X
X
X
1
1
X
X
X
1
1
1
1
1
1
1
X
1
X
X
X
4
4
4
4
4
X
1
1
1
1
2
1
1
4
3
3
1
1
X
X
X
X
X
2
1
X
X
X
2
2
1
1
1
1
1
X
2
X
X
X
4
4
4
4
3
X
4
4
4
1
4
4
3
1
4
4
4
4
X
X
X
X
X
4
4
X
X
X
3
3
4
4
4
4
4
X
3
X
X
X
1
1
1
4
4
X
4
4
4
1
4
X
4
1
4
4
4
4
X
X
X
X
X
X
X
X
X
X
3
3
X
X
X
X
X
X
3
X
X
X
1
1
1
4
4
X
4
4
4
1
4
X
4
1
4
4
4
4
X
X
X
X
X
X
X
X
X
X
4
4
4
4
4
4
4
X
4
X
X
X
1
1
1
4
4
X
4
4
4
1
4
4
4
1
4
4
4
4
X
X
X
X
X
X
X
X
X
X
4
4
4
4
4
4
4
X
4
X
X
X
1
1
1
4
4
X
4
1
2
1
4
X
2
1
4
4
4
3
X
X
X
X
X
2
2
X
X
X
2
2
3
3
3
3
3
X
2
X
X
X
1
1
1
4
4
X
1
1
1
2
2
2
1
1
3
3
2
1
X
X
X
X
X
2
2
X
X
X
1
1
1
1
1
1
1
X
1
X
X
X
1
1
1
2
2
X
2
3
2
3
4
4
2
2
4
4
4
4
X
X
X
X
X
2
3
X
X
X
1
1
2
2
2
2
2
X
1
X
X
X
2
2
2
4
X
X
N0674-70
N0674-70
N0674-70
E1235-80
N0602-70
N0602-70
N0674-70
E0540-80
V1164-75
V1164-75
V1164-75
V1164-75
N0674-70
V3819-75
N0674-70
N0674-70
N0674-70
V1164-75
V1164-75
N0674-70
N0674-70
N0674-70
V1164-75
V1164-75
V1164-75
V1164-75
V1164-75
V1164-75
V1164-75
V3819-75
V1164-75
N0674-70
N0674-70
N0674-70
E0540-80
E0540-80
E0540-80
V1164-75
V1164-75
V3819-75
7-35
Seals
AFLAS
Neoprene
Polyacrylate
Polyurethane
Butyl
Fluorosilicone
Silicone
Nitrile NBR
5700 Handbook
Fluorocarbon FKM
Hifluor FKM
Perfluoroelastomer FFKM
Neoprene/Chloroprene CR
Styrene-Butadiene SBR
Polyacrylate ACM
Polyurethane AU, EU
Butyl IIR
Butadiene BR
Isoprene IR
Natural Rubber NR
Hypalon CSM
Fluorosilicone FVMQ
E0540-80
V1164-75
V1164-75
V3819-75
E0540-80
E0540-80
E0540-80
E0540-80
V3819-75
N0674-70
E0540-80
E0540-80
V1164-75
E0540-80
E0540-80
E0540-80
E0603-70
V1164-75
N0674-70
E1235-80
V1164-75
3
4
X
X
4
3
3
4
X
1
2
3
4
3
4
1
3
X
1
X
X
3
4
X
X
4
3
3
X
X
X
2
3
4
3
4
1
3
X
1
X
X
1
4
X
X
2
1
1
1
X
4
1
1
2
1
1
1
1
X
4
X
X
3
1
1
X
4
3
3
2
X
1
X
3
2
3
3
1
4
1
1
X
1
1
1
1
1
2
1
1
1
2
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
1
4
4
X
4
1
1
1
X
X
2
1
4
1
4
2
2
4
2
X
4
1
4
4
X
2
1
1
1
X
X
2
1
4
1
4
2
1
4
4
X
4
4
4
4
X
4
4
4
4
X
X
X
4
4
4
4
X
X
4
1
X
4
4
4
3
X
4
4
4
4
X
X
X
4
4
4
4
X
X
3
1
X
3
1
4
4
X
2
1
1
1
X
X
1
1
2
1
4
1
2
4
4
X
4
1
4
4
X
2
1
1
1
X
X
X
1
4
1
4
2
X
4
4
X
4
1
4
4
X
2
1
1
1
X
X
X
1
4
1
4
2
X
4
4
X
4
1
4
4
X
2
1
1
1
X
X
X
1
4
1
4
2
X
4
4
X
4
1
4
4
X
4
1
1
1
X
X
2
1
4
1
4
2
2
4
2
X
4
1
2
2
X
4
1
1
1
X
X
X
1
X
1
3
X
4
2
1
X
2
2
4
X
X
2
2
2
2
X
X
4
2
X
2
4
2
3
X
2
X
X
V1164-75
V1164-75
V1164-75
V1164-75
V1164-75
V1164-75
V3819-75
V1164-75
N0674-70
N0674-70
B0612-70
V1164-75
E0540-80
E0540-80
N0674-70
E0540-80
E0540-80
N0674-70
4
X
X
X
X
2
X
2
1
1
1
4
2
3
1
3
3
1
4
X
X
X
X
2
X
2
1
1
1
4
2
3
1
3
3
1
4
X
X
X
X
4
X
4
4
2
1
2
1
1
1
1
1
1
1
1
1
1
1
1
X
1
1
1
1
1
4
3
1
3
3
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
4
4
4
4
4
4
X
4
1
4
1
4
2
1
2
1
1
2
4
4
4
4
4
4
X
4
2
4
1
4
4
1
1
1
1
1
X
4
4
4
4
X
X
2
2
1
1
4
4
4
3
4
4
3
2
3
3
3
3
X
X
2
2
1
1
X
4
4
3
4
4
3
4
4
4
4
4
4
X
4
4
2
1
2
1
1
1
1
1
1
4
4
4
4
4
4
X
4
2
4
1
4
4
1
1
1
1
1
4
4
4
4
4
4
X
4
2
4
1
4
1
1
1
1
1
1
4
4
4
4
4
4
X
4
2
4
1
4
1
1
1
1
1
1
4
4
4
4
4
4
X
4
1
4
1
4
4
1
1
1
1
1
1
2
2
2
2
1
X
2
3
1
1
2
4
1
1
1
1
1
4
X
X
X
X
4
X
4
4
2
1
4
4
2
1
2
2
1
7-36
Seals
AFLAS
Neoprene
Polyacrylate
Polyurethane
Butyl
Fluorosilicone
Silicone
Nitrile NBR
5700 Handbook
Fluorocarbon FKM
Hifluor FKM
Perfluoroelastomer FFKM
Neoprene/Chloroprene CR
Styrene-Butadiene SBR
Polyacrylate ACM
Polyurethane AU, EU
Butyl IIR
Butadiene BR
Isoprene IR
Natural Rubber NR
Hypalon CSM
Fluorosilicone FVMQ
1
X
3
X
3
1
4
X
4
4
4
X
4
3
4
3
3
3
3
3
X
4
3
1
3
4
X
3
3
3
4
3
4
X
X
3
3
3
1
1
1
X
3
X
3
1
4
X
X
X
4
X
4
3
4
3
3
3
3
3
X
4
3
1
3
3
X
3
3
3
4
3
4
X
X
3
3
3
1
1
1
X
1
X
1
1
4
X
2
4
2
4
4
1
1
1
1
1
1
1
X
2
1
1
1
4
X
1
1
1
2
1
2
X
X
1
1
1
1
4
1
1
3
1
3
1
2
X
1
3
3
2
4
3
2
3
3
3
3
3
X
4
3
1
3
4
X
3
3
3
4
3
4
X
X
3
3
3
1
1
1
1
1
1
1
1
1
2
1
1
2
1
3
1
1
1
1
1
1
1
1
1
1
1
1
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
2
1
2
1
1
1
1
1
1
1
1
1
1
1
1
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
X
X
X
X
X
X
3
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
1
4
1
4
1
1
4
X
X
X
4
X
4
1
4
1
1
1
1
1
X
2
1
1
1
4
X
1
1
1
3
1
4
X
X
1
1
1
X
2
2
4
1
4
1
1
X
X
X
X
3
X
4
1
4
1
1
1
1
1
X
2
1
1
1
4
X
1
1
1
3
1
4
X
X
1
1
1
X
4
4
4
4
4
4
4
X
X
X
X
4
X
4
4
4
4
4
4
4
4
X
4
4
1
4
4
X
4
4
4
4
4
4
X
X
4
4
4
X
1
3
3
4
3
4
1
X
X
X
X
4
X
4
4
4
4
4
4
4
4
X
4
4
1
4
4
X
4
4
4
4
4
4
X
X
4
4
4
X
1
1
4
1
4
1
1
X
X
X
X
2
X
4
1
1
1
1
1
1
1
X
2
1
1
1
3
X
1
1
1
2
1
2
X
X
1
1
1
X
4
2
4
1
4
1
1
X
X
X
X
X
X
X
1
4
1
1
1
1
1
X
2
1
1
1
4
X
1
1
1
2
1
4
X
X
1
1
1
X
4
2
4
1
4
1
1
X
X
X
X
X
X
X
1
4
1
1
1
1
1
X
2
1
1
1
4
X
1
1
1
2
1
4
X
X
1
1
1
X
4
2
4
1
4
1
1
X
X
X
X
X
X
4
1
4
1
1
1
1
1
X
2
1
1
1
4
X
1
1
1
2
1
4
X
X
1
1
1
X
4
1
4
1
4
1
1
X
X
X
X
2
X
X
1
4
1
1
1
1
1
X
2
1
1
1
4
X
1
1
1
2
1
4
X
X
1
1
1
X
2
1
2
1
2
1
1
X
X
X
X
4
X
4
1
4
1
1
1
1
1
X
4
1
1
1
4
X
1
1
1
4
1
4
X
X
1
1
1
X
1
1
X
2
X
2
1
X
X
X
X
4
X
4
2
4
2
2
2
2
2
X
4
2
1
2
4
X
2
2
2
4
2
4
X
X
2
2
2
1
2
N0674-70
V1164-75
E0540-80
V1164-75
E0540-80
N0674-70
V3819-75
V3819-75
V1164-75
V3819-75
E0540-80
V0834-70
V3819-75
E0540-80
E0540-80
E0540-80
E0540-80
E0540-80
E0540-80
E0540-80
V3819-75
E0540-80
E0540-80
B0612-70
E0540-80
Factory
V3819-75
E0540-80
E0540-80
E0540-80
E0540-80
E0540-80
E0540-80
V3819-75
V3819-75
E0540-80
E0540-80
E0540-80
E0540-80
N0674-70
7-37
Seals
AFLAS
Neoprene
Polyacrylate
Polyurethane
Butyl
Fluorosilicone
Silicone
Nitrile NBR
5700 Handbook
Fluorocarbon FKM
Hifluor FKM
Perfluoroelastomer FFKM
Neoprene/Chloroprene CR
Styrene-Butadiene SBR
Polyacrylate ACM
Polyurethane AU, EU
Butyl IIR
Butadiene BR
Isoprene IR
Natural Rubber NR
Hypalon CSM
Fluorosilicone FVMQ
N0674-70
N0674-70
1
1
1
1
1
1
X
1
X
1
X
1
X
X
X
2
X
4
X
X
X
X
X
4
X
4
X
X
X
4
X
3
X
X
X
X
V1164-75
N0674-70
N0674-70
V1164-75
E0540-80
V1164-75
N0674-70
V1164-75
V1164-75
V0834-70
V1164-75
V1164-75
V1164-75
N0674-70
V1164-75
V1164-75
V1164-75
E0540-80
E0540-80
E0540-80
V1164-75
E0540-80
V3819-75
V1164-75
V1164-75
V1164-75
E0540-80
V1164-75
S0604-70
C0873-70
V3819-75
E0540-80
E0540-80
4
1
1
1
3
2
1
X
X
3
4
2
X
1
2
2
4
3
3
3
4
3
X
2
2
2
2
4
4
2
4
3
4
4
1
1
1
3
2
1
X
X
3
4
2
X
1
2
2
4
3
3
3
4
3
X
2
2
2
2
4
4
2
4
3
4
4
4
4
4
1
3
4
X
X
4
4
4
X
2
4
4
4
1
1
1
4
1
X
4
4
4
1
4
4
1
4
1
1
1
1
1
1
3
1
1
1
1
2
1
1
1
1
1
1
1
3
3
3
1
3
X
1
1
1
1
2
2
1
4
3
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
3
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
1
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
4
2
2
4
1
2
2
4
4
4
4
3
4
2
1
1
4
1
1
1
4
1
X
1
1
1
2
4
4
4
4
1
2
4
4
4
4
4
4
4
4
4
4
4
1
1
1
4
1
X
4
4
4
2
4
2
1
4
4
4
1
4
4
4
4
X
4
1
X
X
4
4
4
4
4
4
X
X
X
X
X
4
1
1
4
4
4
1
3
3
2
4
3
3
1
1
1
4
4
4
4
4
4
X
4
4
4
X
4
4
4
4
1
2
4
4
4
4
4
4
4
2
4
4
4
1
1
1
4
1
X
4
4
4
1
4
4
4
4
1
2
4
4
4
4
4
4
4
4
4
4
4
1
1
1
4
1
X
4
4
4
2
4
4
4
4
1
2
4
4
4
4
4
4
4
4
4
4
4
1
1
1
4
1
X
4
4
4
2
4
4
4
4
1
2
4
4
4
4
4
4
4
4
4
4
4
1
1
1
4
1
X
4
4
4
2
4
2
2
4
1
2
2
4
4
4
4
2
4
2
4
4
4
1
1
1
4
1
X
2
2
2
2
2
1
1
2
1
2
1
2
2
X
X
2
2
1
1
1
2
1
1
1
2
1
X
2
2
2
1
4
4
2
4
2
2
2
X
X
4
4
4
X
3
4
4
4
2
2
2
4
2
X
4
4
4
2
X
X
4
X
X
4
1
4
1
2
4
2
X
1
4
4
2
X
4
2
4
1
X
4
1
4
1
X
1
2
4
2
X
1
4
4
2
X
1
4
4
2
X
1
4
4
1
X
1
1
4
1
X
1
1
1
1
X
2
1
V1164-75
N0674-70
E0540-80
4
1
3
4
1
3
4
2
1
2
1
3
1
1
1
1
1
1
X
X
X
4
2
1
4
2
1
4
X
4
4
1
4
4
2
1
4
2
1
4
2
1
4
2
1
4
3
1
2
1
1
4
4
2
7-38
Seals
AFLAS
Neoprene
Polyacrylate
Polyurethane
Butyl
Fluorosilicone
Silicone
Nitrile NBR
5700 Handbook
Fluorocarbon FKM
Hifluor FKM
Perfluoroelastomer FFKM
Neoprene/Chloroprene CR
Styrene-Butadiene SBR
Polyacrylate ACM
Polyurethane AU, EU
Butyl IIR
Butadiene BR
Isoprene IR
Natural Rubber NR
Hypalon CSM
Fluorosilicone FVMQ
3
X
3
X
4
1
3
3
4
3
3
3
X
3
1
1
X
X
X
X
3
3
3
X
1
1
1
1
X
1
3
4
2
X
X
X
X
1
1
4
3
X
3
X
4
1
3
3
4
3
3
3
X
3
1
1
X
X
X
X
3
3
3
X
1
1
1
1
X
1
3
4
2
X
X
X
X
1
1
4
1
X
1
X
4
4
1
1
4
1
1
1
X
1
4
3
X
X
X
X
1
1
1
X
4
4
4
4
X
4
1
1
4
X
X
X
X
4
4
4
3
X
3
1
1
1
3
3
4
3
3
3
1
3
1
1
1
X
1
1
3
3
3
X
1
1
1
1
X
1
3
1
1
X
X
X
X
1
1
2
1
1
1
1
1
1
1
1
X
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
X
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
2
2
1
1
1
1
1
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
1
X
1
4
4
2
1
1
4
1
1
1
4
1
1
3
4
X
4
4
1
1
1
X
1
2
2
2
X
2
1
2
4
X
X
X
X
2
2
4
1
X
1
4
4
4
1
1
4
1
1
1
4
1
2
4
4
X
4
4
1
1
1
X
3
4
4
4
X
4
1
4
4
X
X
X
X
4
4
4
4
X
4
4
4
1
4
4
4
4
4
4
4
4
1
1
4
X
4
4
4
4
4
X
1
1
1
1
X
1
4
4
4
X
X
X
X
1
1
4
4
X
4
3
4
1
4
4
4
4
4
4
3
4
1
2
3
X
3
3
4
4
4
X
4
4
4
4
X
1
4
4
4
X
X
X
X
1
1
4
1
X
1
4
4
4
1
1
4
1
1
1
4
1
4
3
4
X
4
4
1
1
1
X
4
4
4
4
X
4
1
2
4
X
X
X
X
4
4
4
1
X
1
4
4
4
1
1
4
1
1
1
4
1
4
4
4
X
4
4
1
1
1
X
4
4
4
4
X
4
1
4
4
X
X
X
X
4
4
4
1
X
1
4
4
4
1
1
4
1
1
1
4
1
4
4
4
X
4
4
1
1
1
X
4
4
4
4
X
4
1
4
4
X
X
X
X
4
4
4
1
X
1
4
4
4
1
1
4
1
1
1
4
1
4
4
4
X
4
4
1
1
1
X
4
4
4
4
X
4
1
4
4
X
X
X
X
4
4
4
1
X
1
4
4
2
1
1
4
1
1
1
4
1
1
2
4
X
4
4
1
1
1
X
2
2
2
2
X
2
1
2
4
X
X
X
X
2
2
4
1
X
1
2
2
1
1
1
4
1
1
1
2
1
1
1
2
X
2
2
1
1
1
X
3
3
3
3
X
1
1
1
2
X
X
X
X
1
1
4
2
X
2
X
4
2
2
2
4
2
2
2
X
2
2
1
X
X
X
X
2
2
2
X
4
4
4
4
X
2
2
2
4
X
X
X
X
4
2
4
E0540-80
V3819-75
E0540-80
V1164-75
V1164-75
N0674-70
E0540-80
E0540-80
Factory
E0540-80
E0540-80
E0540-80
V1164-75
E0540-80
N0674-70
N0674-70
V1164-75
V3819-75
V1164-75
V1164-75
E0540-80
E0540-80
E0540-80
V3819-75
N0674-70
N0674-70
N0674-70
N0674-70
V3819-75
N0674-70
E0540-80
E0540-80
V1164-75
V3819-75
V3819-75
V8545-75
V3819-75
N0674-70
N0674-70
V1164-75
7-39
Seals
AFLAS
Neoprene
Polyacrylate
Polyurethane
Butyl
Fluorosilicone
Silicone
Nitrile NBR
5700 Handbook
Fluorocarbon FKM
Hifluor FKM
Perfluoroelastomer FFKM
Neoprene/Chloroprene CR
Styrene-Butadiene SBR
Polyacrylate ACM
Polyurethane AU, EU
Butyl IIR
Butadiene BR
Isoprene IR
Natural Rubber NR
Hypalon CSM
Fluorosilicone FVMQ
1
1
4
4
4
3
3
X
3
3
4
X
X
4
X
3
4
3
3
4
X
X
1
2
4
X
X
X
X
4
4
3
3
4
1
2
1
1
2
X
1
1
4
4
4
3
3
X
3
3
4
X
X
4
X
3
4
3
3
4
X
X
1
2
4
X
X
X
X
4
4
3
3
4
1
2
1
1
2
X
4
4
4
4
4
1
1
X
1
1
4
X
X
4
X
1
2
1
1
3
X
X
1
1
1
X
X
X
X
1
1
1
1
3
1
2
4
4
4
X
1
1
1
1
1
3
3
1
3
3
1
X
1
4
1
3
1
3
3
4
X
X
1
1
1
X
X
X
X
1
1
3
3
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
1
X
X
X
X
X
X
X
X
X
2
2
4
4
4
1
1
4
1
1
4
X
4
4
4
1
4
1
1
4
X
X
2
2
3
X
X
X
X
4
4
1
1
4
1
2
4
2
3
4
4
4
4
4
4
1
1
4
1
1
4
X
4
4
4
1
2
1
1
4
X
X
2
1
2
X
X
X
X
4
X
1
1
4
2
2
4
4
4
4
2
1
4
4
4
4
4
4
4
4
4
X
4
4
4
4
4
4
4
4
X
X
3
2
3
X
X
X
X
X
X
4
4
4
X
X
X
1
4
4
2
1
4
4
4
4
4
3
4
4
4
X
3
4
3
4
X
4
4
4
X
X
4
4
4
X
X
X
X
X
X
4
4
4
X
X
X
1
2
3
4
4
4
4
4
1
1
4
1
1
4
X
4
4
4
1
4
1
1
3
X
X
1
1
1
X
X
X
X
1
X
1
1
3
1
2
4
4
4
4
4
4
4
4
4
1
1
4
1
1
4
X
4
4
4
1
2
1
1
4
X
X
X
X
X
X
X
X
X
X
X
1
1
4
2
2
4
4
4
4
4
4
4
4
4
1
1
4
1
1
4
X
4
4
4
1
1
1
1
4
X
X
X
X
X
X
X
X
X
X
X
1
1
4
2
2
4
4
4
4
4
4
4
4
4
1
1
4
1
1
4
X
4
4
4
1
1
1
1
4
X
X
X
X
X
X
X
X
X
4
X
1
1
4
1
2
4
4
4
4
2
2
4
4
4
1
1
4
1
1
4
X
4
4
4
1
4
1
1
4
X
X
1
1
1
X
X
X
X
4
X
1
1
2
1
2
4
2
4
4
2
1
2
2
2
1
1
2
1
1
2
X
2
4
2
1
X
1
1
4
X
X
2
3
3
X
X
X
X
1
X
1
1
4
2
2
1
1
1
2
2
4
4
4
4
2
2
X
2
2
4
X
X
4
X
2
X
2
2
4
X
X
2
3
4
X
X
X
X
X
X
2
2
4
X
4
4
2
4
X
N0674-70
N0674-70
V1164-75
V1164-75
V1164-75
E0540-80
E0540-80
V1164-75
E0540-80
E0540-80
V1164-75
V8545-75
V1164-75
V8545-75
V1164-75
E0540-80
V1164-75
E0540-80
E0540-80
Factory
V3819-75
V3819-75
E0540-80
E0540-80
E0540-80
E0540-80
V3819-75
V3819-75
V3819-75
E0540-80
E0540-80
E0540-80
E0540-80
V0834-70
C0873-70
V0834-70
N0674-70
N0674-70
V1164-75
V1164-75
7-40
Seals
AFLAS
Neoprene
Polyacrylate
Polyurethane
Butyl
Fluorosilicone
Silicone
Nitrile NBR
5700 Handbook
Fluorocarbon FKM
Hifluor FKM
Perfluoroelastomer FFKM
Neoprene/Chloroprene CR
Styrene-Butadiene SBR
Polyacrylate ACM
Polyurethane AU, EU
Butyl IIR
Butadiene BR
Isoprene IR
Natural Rubber NR
Hypalon CSM
Fluorosilicone FVMQ
4
X
1
4
1
1
2
3
3
X
X
2
3
3
3
3
3
3
3
3
3
3
3
3
3
1
3
3
1
3
1
1
3
3
3
3
2
3
3
3
4
X
1
4
1
1
2
3
3
X
X
2
3
3
3
3
3
3
3
3
3
3
3
3
3
1
3
3
1
3
1
1
3
3
3
3
2
3
3
3
4
X
1
2
1
1
1
1
1
1
X
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
X
1
1
1
1
3
3
3
X
X
4
3
3
3
3
3
3
3
3
3
3
3
3
3
1
3
3
1
3
1
1
3
3
3
3
4
3
3
3
1
1
1
1
1
1
1
1
1
1
4
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
4
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
X
X
1
X
X
X
1
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
4
X
X
4
4
1
2
1
1
2
X
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
4
X
X
4
4
4
X
1
1
4
X
4
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
4
X
X
4
X
4
X
4
4
X
X
4
4
4
4
4
4
4
4
4
4
4
4
4
4
1
4
4
1
4
1
1
4
4
4
4
4
4
4
4
3
X
X
4
X
1
X
4
4
X
X
4
4
4
4
4
4
4
4
4
4
4
4
4
4
1
4
4
1
4
1
2
4
4
4
4
4
4
4
4
4
X
X
2
1
1
X
1
1
1
X
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
4
X
X
4
X
4
X
1
1
X
X
4
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
4
X
X
4
X
4
X
1
1
X
X
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
4
X
X
4
4
4
X
1
1
2
X
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
4
X
X
4
1
1
X
1
1
2
X
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
X
X
2
X
4
X
1
1
X
X
4
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
3
1
1
1
4
X
X
2
4
4
X
2
2
X
X
4
2
2
2
2
2
2
2
2
2
2
2
2
2
1
2
2
1
2
1
1
2
2
2
2
3
2
2
2
V1164-75
V3819-75
N0674-70
V1164-75
E0540-80
N0674-70
E0540-80
E0540-80
E0540-80
E0540-80
V3819-75
E0540-80
E0540-80
E0540-80
E0540-80
E0540-80
E0540-80
E0540-80
E0540-80
E0540-80
E0540-80
E0540-80
E0540-80
E0540-80
E0540-80
N0674-70
E0540-80
E0540-80
N0674-70
E0540-80
N0674-70
N0674-70
E0540-80
E0540-80
E0540-80
E0540-80
E0540-80
E0540-80
E0540-80
E0540-80
7-41
Seals
AFLAS
Neoprene
Polyacrylate
Polyurethane
Butyl
Fluorosilicone
Silicone
Nitrile NBR
5700 Handbook
Fluorocarbon FKM
Hifluor FKM
Perfluoroelastomer FFKM
Neoprene/Chloroprene CR
Styrene-Butadiene SBR
Polyacrylate ACM
Polyurethane AU, EU
Butyl IIR
Butadiene BR
Isoprene IR
Natural Rubber NR
Hypalon CSM
Fluorosilicone FVMQ
3
3
X
3
1
3
3
3
X
3
X
3
3
3
3
3
1
X
3
3
3
1
3
1
3
3
3
3
1
2
1
1
3
3
1
4
4
1
4
3
3
3
X
3
1
3
3
3
X
3
X
3
3
3
3
3
1
X
3
3
3
1
3
1
3
3
3
3
1
2
1
1
3
3
1
4
4
1
4
3
1
1
X
1
1
1
1
1
X
1
X
1
1
1
1
1
1
X
1
1
1
1
1
1
1
1
1
1
1
4
4
4
1
1
4
2
1
1
2
1
3
3
X
3
1
3
3
3
X
3
X
3
3
3
3
3
1
X
3
3
3
1
3
1
3
3
3
3
1
1
1
1
3
3
1
4
4
1
4
3
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
1
X
X
X
X
X
1
1
X
1
1
1
1
1
X
1
X
1
1
1
1
1
1
X
1
1
1
1
1
1
1
1
1
1
1
2
2
2
1
1
2
4
4
1
4
1
1
1
X
1
1
1
1
1
X
1
X
1
1
1
1
1
1
X
1
1
1
2
1
2
1
1
1
1
1
4
4
4
1
1
X
4
4
1
4
1
4
4
X
4
1
4
4
4
X
4
X
4
4
4
4
4
1
X
4
4
4
4
4
4
4
4
4
4
4
1
2
1
4
4
X
4
4
4
4
4
4
4
X
4
1
4
4
4
X
4
X
4
4
4
4
4
1
X
4
4
4
1
4
1
4
4
4
4
4
2
1
3
4
4
X
4
4
4
X
4
1
1
X
1
1
1
1
1
X
1
X
1
1
1
1
1
1
X
1
1
1
1
1
1
1
1
1
1
1
4
4
4
1
1
X
2
1
1
2
1
1
1
X
1
1
1
1
1
X
1
X
1
1
1
1
1
1
X
1
1
1
1
1
1
1
1
1
1
1
4
4
4
1
1
X
4
4
1
4
1
1
1
X
1
1
1
1
1
X
1
X
1
1
1
1
1
1
X
1
1
1
2
1
2
1
1
1
1
1
4
4
4
1
1
X
4
4
1
4
1
1
1
X
1
1
1
1
1
X
1
X
1
1
1
1
1
1
X
1
1
1
2
1
2
1
1
1
1
1
4
4
4
1
1
X
4
4
1
4
1
1
1
X
1
1
1
1
1
X
1
X
1
1
1
1
1
1
X
1
1
1
2
1
2
1
1
1
1
1
4
2
2
1
1
X
4
4
1
4
1
1
1
X
1
1
1
1
1
X
1
X
1
1
1
1
1
1
X
1
1
1
1
1
1
1
1
1
1
1
1
2
2
1
1
X
4
4
1
4
1
2
2
X
2
1
2
2
2
X
2
X
2
2
2
2
2
1
X
2
2
2
1
2
1
2
2
2
2
1
2
2
4
2
2
X
4
4
1
4
2
E0540-80
E0540-80
V3819-75
E0540-80
N0674-70
E0540-80
E0540-80
E0540-80
V3819-75
E0540-80
V3819-75
E0540-80
E0540-80
E0540-80
E0540-80
E0540-80
N0674-70
V3819-75
E0540-80
E0540-80
E0540-80
N0674-70
E0540-80
N0674-70
E0540-80
E0540-80
E0540-80
E0540-80
N0674-70
V1164-75
N0674-70
N0674-70
E0540-80
E0540-80
N0674-70
E0540-80
E0540-80
N0674-70
E0540-80
E0540-80
7-42
Seals
AFLAS
Neoprene
Polyacrylate
Polyurethane
Butyl
Fluorosilicone
Silicone
Nitrile NBR
5700 Handbook
Fluorocarbon FKM
Hifluor FKM
Perfluoroelastomer FFKM
Neoprene/Chloroprene CR
Styrene-Butadiene SBR
Polyacrylate ACM
Polyurethane AU, EU
Butyl IIR
Butadiene BR
Isoprene IR
Natural Rubber NR
Hypalon CSM
Fluorosilicone FVMQ
E0540-80
V1164-75
V1164-75
V1164-75
V1164-75
V1164-75
E0540-80
V1164-75
E0540-80
E0540-80
E0540-80
V1164-75
V1164-75
V1164-75
N0674-70
V1164-75
E0540-80
E0540-80
E0540-80
V1164-75
E0540-80
E0540-80
N0674-70
E0540-80
V1164-75
E0540-80
V1164-75
E0540-80
E0540-80
3
X
3
X
X
X
3
X
4
4
4
4
4
4
1
4
4
3
3
2
4
4
1
4
4
3
2
4
3
3
X
3
X
X
X
3
X
4
4
4
4
4
4
1
4
4
3
3
2
4
4
1
4
4
3
2
4
3
1
X
4
X
X
X
1
X
2
1
1
1
4
1
4
2
2
1
1
4
1
1
4
2
2
1
4
4
1
3
1
1
1
1
1
3
1
4
1
4
1
1
1
1
1
4
3
3
1
1
1
4
4
1
3
1
4
3
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
X
X
X
X
X
X
X
X
X
1
X
X
X
X
X
X
X
X
X
X
2
X
X
X
X
X
X
X
X
1
4
4
4
4
4
1
4
4
4
4
4
4
4
2
4
4
1
1
4
4
4
2
2
4
1
4
4
1
1
4
4
4
4
4
1
4
4
X
4
4
4
4
4
4
4
1
1
4
X
4
4
4
4
1
4
2
1
4
4
4
4
4
4
4
4
4
X
4
4
4
4
1
4
4
4
4
4
X
4
X
4
4
4
4
4
4
4
3
4
3
3
3
4
3
4
X
4
4
4
4
2
3
X
4
4
3
X
4
1
4
4
4
3
X
4
1
4
4
4
4
4
1
4
2
X
1
1
4
1
4
4
2
1
1
4
X
1
4
2
2
1
4
4
1
1
4
4
4
4
4
1
4
4
X
4
4
4
4
4
4
4
1
1
4
X
4
4
4
4
1
4
2
1
1
4
4
4
4
4
1
4
4
X
4
4
4
4
4
4
4
1
1
4
X
4
4
4
4
1
4
2
1
1
4
4
4
4
4
1
4
4
X
4
4
4
4
4
4
4
1
1
4
X
4
4
4
4
1
4
2
1
1
4
4
4
4
4
1
4
4
X
4
4
4
4
2
4
4
1
1
4
X
4
1
2
4
1
4
2
1
1
2
3
2
2
2
1
2
4
X
4
3
4
1
1
2
4
1
1
2
X
4
2
4
2
1
2
4
1
2
X
4
X
X
X
2
X
4
X
1
4
4
1
4
X
4
2
2
X
X
4
3
X
2
2
X
2
2
V1164-75
V1164-75
E0540-80
E0540-80
E0540-80
E0540-80
V1164-75
V1164-75
V1164-75
2
2
3
3
3
3
2
2
2
2
2
3
3
3
3
2
2
2
4
4
1
1
1
1
4
4
4
1
1
3
3
3
3
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
X
X
X
X
X
X
X
X
X
4
4
1
1
1
1
4
4
4
4
4
1
1
1
1
4
4
4
4
4
4
4
4
4
4
4
4
3
3
4
4
4
4
3
3
3
4
4
1
1
1
1
4
4
4
4
4
1
1
1
1
4
4
4
4
4
1
1
1
1
4
4
4
4
4
1
1
1
1
4
4
4
4
4
1
1
1
1
4
4
4
2
2
1
1
1
1
2
2
2
X
X
2
2
2
2
X
X
X
7-43
Seals
AFLAS
Neoprene
Polyacrylate
Polyurethane
Butyl
Fluorosilicone
Silicone
Nitrile NBR
5700 Handbook
Fluorocarbon FKM
Hifluor FKM
Perfluoroelastomer FFKM
Neoprene/Chloroprene CR
Styrene-Butadiene SBR
Polyacrylate ACM
Polyurethane AU, EU
Butyl IIR
Butadiene BR
Isoprene IR
Natural Rubber NR
Hypalon CSM
Fluorosilicone FVMQ
E0740-75
V1164-75
E0540-80
N0674-70
N0674-70
E0540-80
V3819-75
V1164-75
V1164-75
N0602-70
N0602-70
V1164-75
N0602-70
3
2
2
1
1
3
X
2
2
1
2
2
1
3
2
2
1
1
3
X
2
2
1
2
2
1
2
4
1
4
4
1
X
4
4
4
4
4
4
4
1
1
1
1
3
X
1
1
1
1
1
1
3
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
X
X
X
X
X
X
X
X
X
X
X
X
X
X
4
2
2
2
1
X
4
4
2
4
4
2
X
4
4
4
4
1
X
4
4
4
4
4
4
X
4
2
1
1
4
X
4
4
1
2
4
1
4
3
2
1
1
4
X
3
3
1
2
3
1
4
4
1
4
4
1
X
4
4
4
4
4
4
X
4
4
4
4
1
X
4
4
4
X
4
4
X
4
4
4
4
1
X
4
4
4
X
4
4
4
4
4
4
4
1
X
4
4
4
4
4
4
X
4
2
2
2
1
X
4
4
2
X
4
2
4
2
1
1
1
1
X
2
2
1
1
2
1
2
X
4
4
4
2
X
X
X
4
4
X
4
E0540-80
E0540-80
E0540-80
V1164-75
N0674-70
E0540-80
E0540-80
E0540-80
N0674-70
E0740-75
V1164-75
E0740-75
N0674-70
N0674-70
N0674-70
N0674-70
N0674-70
N0674-70
N0674-70
N0674-70
N0674-70
N0674-70
N0674-70
N0674-70
E0540-80
3
1
2
4
1
3
3
3
1
2
2
2
1
1
1
1
1
1
1
1
1
1
1
1
3
3
1
2
4
1
3
3
3
1
2
2
2
1
1
1
1
1
1
1
1
1
1
1
1
3
1
1
1
3
1
1
1
1
1
1
3
1
4
4
4
4
4
4
4
4
4
4
4
4
1
3
1
1
1
1
3
3
3
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
3
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
1
1
X
X
1
1
X
4
2
1
1
1
2
1
X
1
2
2
4
2
2
2
2
2
2
2
2
2
1
1
1
2
4
1
1
1
1
1
1
X
1
4
4
4
4
4
4
4
4
4
X
X
4
1
4
1
X
4
4
4
4
4
4
1
X
1
4
1
1
1
1
1
1
1
1
X
X
1
4
4
1
X
X
2
4
4
4
4
2
X
2
4
1
2
2
1
2
2
1
1
X
X
1
4
1
1
1
3
1
1
1
1
1
1
3
1
4
4
4
4
4
4
4
4
4
X
X
4
1
1
1
2
4
1
1
1
1
1
X
X
1
4
4
4
4
4
4
4
4
4
X
X
4
1
1
1
1
4
1
1
1
1
1
1
X
1
4
4
4
4
4
4
4
4
4
X
X
4
1
1
1
1
4
1
1
1
1
1
1
X
1
4
4
4
4
4
4
4
4
4
X
X
4
1
1
1
X
X
1
1
1
1
1
1
X
1
2
4
4
4
4
4
4
4
4
X
X
4
1
1
1
1
1
1
1
1
1
1
1
X
1
1
1
1
1
1
1
1
1
1
X
X
1
1
2
2
X
1
1
2
2
2
1
4
4
4
X
2
X
4
4
4
4
4
4
X
X
4
2
7-44
Seals
AFLAS
Neoprene
Polyacrylate
Polyurethane
Butyl
Fluorosilicone
Silicone
Nitrile NBR
5700 Handbook
Fluorocarbon FKM
Hifluor FKM
Perfluoroelastomer FFKM
Neoprene/Chloroprene CR
Styrene-Butadiene SBR
Polyacrylate ACM
Polyurethane AU, EU
Butyl IIR
Butadiene BR
Isoprene IR
Natural Rubber NR
Hypalon CSM
Fluorosilicone FVMQ
X
2
X
X
X
1
1
3
3
3
2
3
1
1
4
4
4
1
1
1
1
1
X
2
3
3
3
3
3
3
3
3
3
3
1
3
3
1
3
3
X
2
X
X
X
1
1
3
3
3
2
3
1
1
4
4
4
1
1
1
1
1
X
2
3
3
3
3
3
3
3
3
3
3
1
3
3
1
3
3
X
4
X
X
X
1
1
1
1
1
1
1
4
4
1
1
1
1
4
4
4
1
X
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
X
1
X
X
X
1
1
3
3
3
1
3
1
1
4
2
4
1
1
1
1
1
X
4
3
3
3
3
3
3
3
3
3
3
1
3
3
1
3
3
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
4
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
4
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
1
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
1
X
X
X
1
1
1
1
1
1
1
2
4
4
4
4
2
2
2
2
1
X
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
X
4
X
X
X
1
1
1
1
1
1
1
4
4
4
X
4
2
4
4
4
1
X
4
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
X
X
X
X
X
1
1
4
4
4
1
4
1
X
4
X
4
4
1
1
1
X
X
3
4
4
4
4
4
4
4
4
4
4
X
4
4
4
4
4
X
1
X
X
X
1
1
4
4
4
1
4
1
X
4
X
4
4
2
2
1
X
X
3
4
4
4
4
4
4
4
4
4
4
X
4
4
X
4
4
X
4
X
X
X
1
1
1
1
1
1
1
4
4
2
X
2
1
4
4
4
1
X
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
X
4
X
X
X
1
1
1
1
1
1
1
4
4
4
X
4
1
4
4
4
1
X
4
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
X
4
X
X
X
1
1
1
1
1
1
1
4
4
4
X
4
1
4
4
4
1
X
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
X
4
X
X
X
1
1
1
1
1
1
1
4
4
4
X
4
2
4
4
4
1
X
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
X
X
X
X
X
1
1
1
1
1
1
1
2
4
4
X
4
1
4
4
2
1
X
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
X
1
X
X
X
2
3
1
1
1
1
1
1
1
3
X
3
1
2
2
1
1
X
4
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
X
4
X
X
X
3
3
2
2
2
1
2
4
X
3
X
3
1
4
4
4
1
X
4
2
2
2
2
2
2
2
2
2
2
1
2
2
1
2
2
V3819-75
V1164-75
V3819-75
V3819-75
V3819-75
E0540-80
E0540-80
E0540-80
E0540-80
E0540-80
E0540-80
E0540-80
N0674-70
N0674-70
E1235-80
E1235-80
E1235-80
E0540-80
N0674-70
N0674-70
N0674-70
N0674-70
V3819-75
E0540-80
E0540-80
E0540-80
E0540-80
E0540-80
E0540-80
E0540-80
E0540-80
E0540-80
E0540-80
E0540-80
N0674-70
E0540-80
E0540-80
N0674-70
E0540-80
E0540-80
7-45
Seals
AFLAS
Neoprene
Polyacrylate
Polyurethane
Butyl
Fluorosilicone
Silicone
Nitrile NBR
5700 Handbook
Fluorocarbon FKM
Hifluor FKM
Perfluoroelastomer FFKM
Neoprene/Chloroprene CR
Styrene-Butadiene SBR
Polyacrylate ACM
Polyurethane AU, EU
Butyl IIR
Butadiene BR
Isoprene IR
Natural Rubber NR
Hypalon CSM
Fluorosilicone FVMQ
1
3
3
1
3
1
3
3
3
3
3
3
1
3
3
3
3
3
3
3
3
3
3
X
3
3
3
2
2
3
3
3
3
3
1
3
3
3
2
3
1
3
3
1
3
1
3
3
3
3
3
3
1
3
3
3
3
3
3
3
3
3
3
X
3
3
3
2
2
3
3
3
3
3
1
3
3
3
2
3
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
X
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
3
3
1
3
1
3
3
3
3
3
3
X
3
3
3
3
3
3
3
3
3
3
X
3
3
3
2
1
3
3
3
3
3
1
3
3
3
X
3
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
X
1
1
1
2
2
1
1
1
1
1
2
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
X
1
1
1
2
2
1
1
1
1
1
1
1
1
1
2
1
X
4
4
X
4
X
4
4
4
4
4
4
X
4
4
4
4
4
4
4
4
4
4
X
4
4
4
4
4
4
4
4
4
4
X
4
4
4
X
4
X
4
4
X
4
1
4
4
4
4
4
4
X
4
4
4
4
4
4
4
4
4
4
X
4
4
4
2
4
4
4
4
4
4
X
4
4
4
X
4
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
X
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
X
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
X
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
X
1
1
1
1
2
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
X
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
X
1
1
1
1
1
1
X
1
1
1
1
1
1
1
1
1
1
X
1
1
1
2
2
1
1
1
1
1
1
1
1
1
X
1
1
2
2
1
2
1
2
2
2
2
2
2
1
2
2
2
2
2
2
2
2
2
2
X
2
2
2
1
2
2
2
2
2
2
X
2
2
2
4
2
N0674-70
E0540-80
E0540-80
N0674-70
E0540-80
N0674-70
E0540-80
E0540-80
E0540-80
E0540-80
E0540-80
E0540-80
N0674-70
E0540-80
E0540-80
E0540-80
E0540-80
E0540-80
E0540-80
E0540-80
E0540-80
E0540-80
E0540-80
V3819-75
E0540-80
E0540-80
E0540-80
E0540-80
E0540-80
E0540-80
E0540-80
E0540-80
E0540-80
E0540-80
N0674-70
E0540-80
E0540-80
E0540-80
E0540-80
E0540-80
7-46
Seals
AFLAS
Neoprene
Polyacrylate
Polyurethane
Butyl
Fluorosilicone
Silicone
Nitrile NBR
5700 Handbook
Fluorocarbon FKM
Hifluor FKM
Perfluoroelastomer FFKM
Neoprene/Chloroprene CR
Styrene-Butadiene SBR
Polyacrylate ACM
Polyurethane AU, EU
Butyl IIR
Butadiene BR
Isoprene IR
Natural Rubber NR
Hypalon CSM
Fluorosilicone FVMQ
3
3
2
3
3
2
3
3
3
1
1
1
3
3
3
3
1
X
1
X
3
1
1
3
3
3
3
3
3
3
2
3
3
X
3
3
3
1
2
1
3
3
2
3
3
2
3
3
3
1
1
1
3
3
3
3
1
X
1
X
3
1
1
3
3
3
3
3
3
3
2
3
3
X
3
3
3
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
X
1
X
1
1
1
1
1
1
1
1
1
1
1
1
1
X
1
4
4
4
4
3
3
3
1
3
3
1
3
3
3
1
1
1
3
3
3
3
1
X
1
X
3
1
1
3
3
3
3
3
3
3
1
3
3
X
3
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
1
1
2
1
1
2
1
1
1
2
2
2
1
1
1
1
2
X
1
X
1
1
1
1
1
1
1
1
1
1
1
1
1
X
1
4
4
2
2
3
1
1
2
1
1
2
1
1
1
1
1
1
1
1
1
1
1
X
1
X
1
2
2
1
1
1
1
1
1
1
2
1
1
X
1
4
4
4
4
4
4
4
X
4
4
4
4
4
4
1
1
1
4
4
4
4
1
X
X
X
4
4
4
4
4
4
4
4
4
4
4
4
4
X
4
4
4
2
2
1
4
4
X
4
4
4
4
4
4
1
1
1
4
4
4
4
1
X
X
X
4
1
1
4
4
4
4
4
4
4
1
4
4
X
4
4
4
2
2
X
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
X
1
X
1
1
1
1
1
1
1
1
1
1
1
1
1
X
1
4
4
4
4
3
1
1
2
1
1
2
1
1
1
1
1
1
1
1
1
1
1
X
1
X
1
2
2
1
1
1
1
1
1
1
2
1
1
X
1
4
4
4
4
4
1
1
2
1
1
2
1
1
1
1
1
1
1
1
1
1
1
X
1
X
1
2
2
1
1
1
1
1
1
1
2
1
1
X
1
4
4
4
4
4
1
1
2
1
1
2
1
1
1
1
1
1
1
1
1
1
1
X
1
X
1
2
2
1
1
1
1
1
1
1
2
1
1
X
1
4
4
4
4
4
1
1
2
1
1
2
1
1
1
1
1
1
1
1
1
1
1
X
1
X
1
1
1
1
1
1
1
1
1
1
1
1
1
X
1
X
X
2
2
3
1
1
1
1
1
1
1
1
1
X
X
X
1
1
1
1
1
X
X
X
1
1
1
1
1
1
1
1
1
1
1
1
1
X
1
4
4
1
1
1
2
2
2
2
2
4
2
2
2
4
4
1
2
2
2
2
1
X
X
X
2
1
1
2
2
2
2
2
2
2
1
2
2
X
2
4
4
4
4
1
E0540-80
E0540-80
E0540-80
E0540-80
E0540-80
E0540-80
E0540-80
E0540-80
E0540-80
N0674-70
N0674-70
N0674-70
E0540-80
E0540-80
E0540-80
E0540-80
N0674-70
V3819-75
N0674-70
V3819-75
E0540-80
N0674-70
N0674-70
E0540-80
E0540-80
E0540-80
E0540-80
E0540-80
E0540-80
E0540-80
E0540-80
E0540-80
E0540-80
V3819-75
E0540-80
V1238-95
V1238-95
N0674-70
V1164-75
N0674-70
7-47
Seals
AFLAS
Neoprene
Polyacrylate
Polyurethane
Butyl
Fluorosilicone
Silicone
Nitrile NBR
5700 Handbook
Fluorocarbon FKM
Hifluor FKM
Perfluoroelastomer FFKM
Neoprene/Chloroprene CR
Styrene-Butadiene SBR
Polyacrylate ACM
Polyurethane AU, EU
Butyl IIR
Butadiene BR
Isoprene IR
Natural Rubber NR
Hypalon CSM
Fluorosilicone FVMQ
1
1
2
1
3
1
1
3
3
3
1
3
3
2
4
4
X
2
1
3
3
3
3
3
4
3
1
3
3
2
2
3
2
2
3
3
4
4
4
4
1
1
2
1
3
1
1
3
3
3
1
3
3
2
4
4
X
2
1
3
3
3
3
3
4
3
1
3
3
2
2
3
2
2
3
3
4
4
4
4
2
4
4
4
1
1
1
1
1
1
1
1
1
4
1
3
X
2
4
1
1
1
1
1
4
1
1
1
1
4
4
1
1
4
1
1
1
3
4
1
1
1
1
1
3
1
1
3
3
3
1
3
3
1
4
4
X
X
1
3
3
3
3
3
2
3
1
3
3
1
1
3
2
1
3
3
1
1
1
4
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
1
X
X
X
X
X
X
X
2
4
4
2
1
4
4
1
1
1
1
1
1
4
4
4
X
2
2
1
1
1
1
1
4
1
2
1
1
4
4
1
2
4
1
1
1
3
4
4
4
4
4
4
1
1
1
1
1
1
1
1
1
4
4
4
X
2
4
1
1
1
1
1
4
1
1
1
1
4
4
1
X
4
1
1
4
4
4
2
1
2
2
1
4
X
X
4
4
4
X
4
4
2
4
4
X
X
1
4
4
4
4
4
4
4
4
4
4
4
4
4
X
4
4
4
4
4
4
4
1
2
2
1
4
X
X
4
4
4
X
4
4
X
4
4
X
X
1
4
4
4
4
4
X
4
4
4
4
3
3
4
X
3
4
4
X
4
X
X
2
4
4
4
1
1
1
1
1
1
1
1
1
4
2
4
X
2
4
1
1
1
1
1
4
1
1
1
1
4
4
1
X
4
1
1
1
3
4
2
4
4
4
4
1
1
1
1
1
1
1
1
1
4
4
4
X
2
4
1
1
1
1
1
4
1
1
1
1
4
4
1
X
4
1
1
4
4
4
2
4
4
4
4
1
1
1
1
1
1
1
1
1
4
4
4
X
2
4
1
1
1
1
1
4
1
1
1
1
4
4
1
X
4
1
1
4
4
4
2
4
4
4
4
1
1
1
1
1
1
1
1
1
4
4
4
X
2
4
1
1
1
1
1
4
1
1
1
1
4
4
1
X
4
1
1
4
4
4
2
4
4
4
2
1
4
4
1
1
1
1
1
1
4
4
4
X
2
4
1
1
1
1
1
4
1
2
1
1
4
4
1
X
4
1
1
X
4
4
4
1
1
1
1
1
1
1
1
1
1
1
1
1
2
4
4
X
X
1
1
1
1
1
1
3
1
1
1
1
2
2
1
X
2
1
1
1
3
1
2
1
4
4
4
2
2
2
2
2
2
2
2
2
4
3
4
X
2
4
2
2
2
2
2
4
2
1
2
2
X
X
2
X
X
2
2
X
3
3
2
N0674-70
N0674-70
V1164-75
N0674-70
E0540-80
N0674-70
N0674-70
E0540-80
E0540-80
E0540-80
N0674-70
E0540-80
E0540-80
V1164-75
E0692-75
E0962-90
V8545-75
N0674-70
N0674-70
E0540-80
E0540-80
E0540-80
E0540-80
E0540-80
V1164-75
E0540-80
N0674-70
E0540-80
E0540-80
V1164-75
V1164-75
E0540-80
E0540-80
V1164-75
E0540-80
E0540-80
E0540-80
V1164-75
V1164-75
E0540-80
7-48
Seals
AFLAS
Neoprene
Polyacrylate
Polyurethane
Butyl
Fluorosilicone
Silicone
Nitrile NBR
5700 Handbook
Fluorocarbon FKM
Hifluor FKM
Perfluoroelastomer FFKM
Neoprene/Chloroprene CR
Styrene-Butadiene SBR
Polyacrylate ACM
Polyurethane AU, EU
Butyl IIR
Butadiene BR
Isoprene IR
Natural Rubber NR
Hypalon CSM
Fluorosilicone FVMQ
E0540-80
E0540-80
E0540-80
V0834-70
N0674-70
V3819-75
V1164-75
E0540-80
E0540-80
V1164-75
V1164-75
E0540-80
V1164-75
N0674-70
N0674-70
N0674-70
N0674-70
N0497-70
E0540-80
N0674-70
N0674-70
4
4
2
2
1
X
4
3
2
X
4
3
2
1
1
1
1
1
3
1
1
4
4
2
2
1
X
4
3
2
X
X
3
2
1
1
1
1
1
3
1
1
1
1
1
2
4
X
2
1
1
3
4
1
2
4
4
4
4
4
1
4
4
4
4
3
1
1
X
1
3
1
1
1
3
1
1
1
1
1
1
3
1
1
1
1
2
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
X
X
3
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
4
2
1
2
2
X
4
1
2
X
4
1
2
2
2
2
2
2
1
4
2
4
4
X
2
4
X
3
1
3
X
4
1
2
4
4
4
4
4
1
4
4
4
4
X
4
1
X
4
4
2
X
4
4
4
1
1
1
4
2
4
1
1
X
X
X
X
1
X
X
4
4
3
4
4
3
1
1
1
4
2
4
1
1
2
1
X
2
4
X
2
1
1
X
4
1
2
4
4
4
4
4
1
4
4
4
4
X
2
4
X
2
1
X
X
X
1
2
4
4
4
4
4
1
4
4
4
4
X
2
4
X
2
1
X
X
X
1
2
4
4
4
4
4
1
4
4
4
4
X
2
4
X
2
1
X
X
X
1
2
4
4
4
4
4
1
4
4
4
3
X
2
2
X
4
1
1
X
X
1
1
2
2
2
2
4
1
4
4
2
2
X
2
1
X
2
1
1
X
4
1
X
1
1
1
1
2
1
1
1
2
2
X
4
2
X
2
2
1
X
4
2
4
4
4
4
X
4
2
4
4
N0674-70
N0674-70
V1164-75
N0674-70
V3819-75
E0540-80
V1164-75
V1164-75
V3819-75
V1164-75
V1164-75
V1164-75
V1164-75
E0540-80
V1164-75
V1164-75
V1164-75
V1164-75
1
1
2
1
X
3
2
2
X
4
4
4
2
2
4
4
2
2
1
1
2
1
X
3
2
2
X
4
4
4
2
2
4
4
2
2
4
1
4
2
X
1
3
4
X
2
4
4
4
1
4
4
4
4
1
1
1
1
X
3
1
1
X
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
2
1
3
2
X
1
4
4
X
2
X
4
4
2
4
4
2
4
4
2
4
4
X
1
4
4
X
2
X
4
4
2
4
4
4
4
1
4
4
X
X
4
X
4
X
4
X
4
4
X
4
4
X
X
1
X
X
1
X
4
2
3
X
4
X
X
3
X
4
4
X
X
4
1
4
2
X
1
3
4
X
2
X
4
4
2
4
4
4
4
4
1
4
2
X
1
4
4
X
2
X
4
4
2
4
4
4
4
4
1
2
1
X
1
4
4
X
4
X
4
4
2
4
4
4
4
4
1
3
3
X
1
4
4
X
4
X
4
4
2
4
4
4
4
2
1
4
1
X
1
4
4
X
2
X
4
4
4
4
4
4
4
1
1
1
1
X
1
1
2
X
1
X
2
2
4
2
2
2
2
2
2
2
1
X
2
X
X
X
X
X
4
X
4
4
X
X
X
7-49
Seals
AFLAS
Neoprene
Polyacrylate
Polyurethane
Butyl
Fluorosilicone
Silicone
Nitrile NBR
5700 Handbook
Fluorocarbon FKM
Hifluor FKM
Perfluoroelastomer FFKM
Neoprene/Chloroprene CR
Styrene-Butadiene SBR
Polyacrylate ACM
Polyurethane AU, EU
Butyl IIR
Butadiene BR
Isoprene IR
Natural Rubber NR
Hypalon CSM
Fluorosilicone FVMQ
X
4
4
3
X
2
2
3
X
1
1
1
1
1
1
1
1
1
1
1
4
2
X
X
4
X
1
3
3
3
4
4
2
2
3
3
3
1
1
3
X
4
4
3
X
2
2
3
X
1
1
1
1
1
1
1
1
1
1
1
4
2
X
X
4
X
1
3
3
3
4
4
2
2
3
3
3
1
1
3
X
2
4
1
X
4
4
1
X
4
4
4
4
4
4
4
4
4
4
4
4
4
X
X
4
X
4
1
1
1
1
1
4
4
1
1
1
4
4
1
X
4
1
3
X
1
1
3
X
1
1
1
1
1
1
1
1
1
1
1
1
1
X
X
1
X
1
3
3
3
1
1
1
1
3
3
3
1
1
3
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
4
4
1
X
4
4
1
X
4
2
2
4
2
2
2
2
2
2
2
4
4
X
X
4
X
2
1
1
1
2
2
4
4
1
1
1
2
2
1
X
4
4
1
X
4
4
1
X
4
4
4
4
4
4
4
4
4
4
4
X
X
X
X
X
X
4
1
1
1
4
4
4
4
1
1
1
4
4
1
X
4
X
4
X
4
4
4
X
1
1
1
1
1
1
1
1
1
1
1
4
2
X
X
4
X
1
4
4
4
X
X
4
4
4
4
4
1
1
4
X
3
X
4
X
3
3
4
X
1
2
2
1
1
2
2
2
2
2
1
X
X
X
X
X
X
1
4
4
4
X
X
3
3
4
4
4
1
1
4
X
2
4
1
X
4
4
1
X
4
4
4
4
4
4
4
4
4
4
4
4
4
X
X
4
X
4
1
1
1
1
1
4
4
1
1
1
4
4
1
X
4
4
1
X
4
4
1
X
4
4
4
4
4
4
4
4
4
4
4
X
X
X
X
X
X
4
1
1
1
X
X
4
4
1
1
1
4
4
1
X
4
4
1
X
4
4
1
X
4
4
4
4
4
4
4
4
4
4
4
X
X
X
X
X
X
4
1
1
1
X
X
4
4
1
1
1
4
4
1
X
4
4
1
X
4
4
1
X
4
4
4
4
4
4
4
4
4
4
4
X
X
X
X
X
X
4
1
1
1
X
X
4
4
1
1
1
4
4
1
X
4
4
1
X
4
4
1
X
4
4
4
4
4
4
4
4
4
4
4
X
X
X
X
X
X
2
1
1
1
2
2
4
4
1
1
1
2
4
1
X
4
1
1
X
2
2
1
X
1
1
1
1
1
2
2
2
2
2
1
X
X
X
X
X
X
1
1
1
1
2
2
2
2
1
1
1
1
1
1
X
4
4
2
X
X
X
2
X
4
4
4
4
2
4
4
4
4
4
2
4
4
X
X
2
X
2
2
2
2
X
X
X
X
2
2
2
4
2
2
V3819-75
V8545-75
V1164-75
E0540-80
V3819-75
V1164-75
V1164-75
E0540-80
V3819-75
N0674-70
N0674-70
N0674-70
N0674-70
N0674-70
N0674-70
N0674-70
N0674-70
N0674-70
N0674-70
N0674-70
V1164-75
V1164-75
V3819-75
V3819-75
V1164-75
V3819-75
N0674-70
E0540-80
E0540-80
E0540-80
E0540-80
E0540-80
V1164-75
V1164-75
E0540-80
E0540-80
E0540-80
N0674-70
N0674-70
E0540-80
7-50
Seals
AFLAS
Neoprene
Polyacrylate
Polyurethane
Butyl
Fluorosilicone
Silicone
Nitrile NBR
5700 Handbook
Fluorocarbon FKM
Hifluor FKM
Perfluoroelastomer FFKM
Neoprene/Chloroprene CR
Styrene-Butadiene SBR
Polyacrylate ACM
Polyurethane AU, EU
Butyl IIR
Butadiene BR
Isoprene IR
Natural Rubber NR
Hypalon CSM
Fluorosilicone FVMQ
1
1
3
3
3
2
4
X
4
2
3
2
3
2
3
1
1
2
4
2
4
3
4
4
X
2
2
2
4
3
3
4
3
X
4
4
4
3
2
X
1
1
3
3
3
2
4
X
4
2
3
2
3
2
3
1
1
2
4
2
4
3
4
4
X
2
2
2
4
3
3
4
3
X
4
4
4
3
2
X
4
4
1
1
1
4
4
X
2
4
1
4
1
4
1
4
4
1
1
4
1
1
4
1
X
2
4
4
4
1
4
4
1
X
4
4
1
2
4
X
1
1
3
3
3
1
1
X
4
1
3
1
3
1
3
1
1
4
1
1
1
3
1
4
X
3
1
1
1
3
1
1
3
X
1
1
2
4
1
X
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
2
2
1
1
1
4
4
X
4
4
1
4
1
4
1
2
2
2
4
4
4
1
4
4
X
4
4
4
4
1
4
4
1
X
4
4
3
2
4
X
4
4
1
1
1
4
4
X
4
4
1
4
1
4
1
4
4
3
4
4
2
1
4
4
X
2
4
4
4
1
4
4
1
X
4
4
2
2
4
X
1
1
4
4
4
4
4
X
4
4
4
4
4
4
4
2
1
4
4
4
4
4
4
4
X
4
4
4
4
4
4
4
4
X
4
4
4
4
4
X
1
1
4
4
4
4
4
X
X
3
4
3
4
3
4
1
1
4
4
3
4
4
X
4
X
4
3
3
4
4
4
4
4
X
4
4
4
4
3
X
4
4
1
1
1
4
4
X
2
4
1
4
1
4
1
4
4
1
1
4
1
1
4
2
X
2
4
4
4
1
4
4
1
X
4
4
1
2
4
X
4
4
1
1
1
4
4
X
4
4
1
4
1
4
1
4
4
2
4
4
2
1
4
4
X
2
4
4
4
1
4
4
1
X
4
4
4
2
4
X
4
4
1
1
1
4
4
X
4
4
1
4
1
4
1
4
4
2
4
4
4
1
4
2
X
2
4
4
4
1
4
4
1
X
4
4
4
2
4
X
4
4
1
1
1
4
4
X
4
4
1
4
1
4
1
4
4
2
4
4
2
1
4
2
X
2
4
4
4
1
4
4
1
X
4
4
4
2
4
X
2
2
1
1
1
4
4
X
4
4
1
4
1
4
1
4
2
2
4
4
4
1
4
4
X
4
4
4
4
1
4
4
1
X
4
4
4
2
4
X
1
1
1
1
1
2
2
X
4
2
1
2
1
2
1
1
1
4
2
2
2
1
3
4
X
4
2
2
2
1
2
2
1
X
2
2
2
4
2
X
2
2
2
2
2
4
4
X
4
X
2
X
2
X
2
2
2
X
3
X
X
2
4
4
X
X
X
X
4
2
4
4
2
X
4
4
3
X
X
X
N0674-70
N0674-70
E0540-80
E0540-80
E0540-80
V1164-75
V1164-75
V3819-75
E0540-80
V1164-75
E0540-80
V1164-75
E0540-80
V1164-75
E0540-80
N0674-70
N0674-70
E0540-80
E0540-80
V1164-75
E0540-80
E0540-80
V1164-75
E0540-80
V8545-75
E0540-80
V1164-75
V1164-75
V1164-75
E0540-80
V1164-75
V1164-75
E0540-80
V3819-75
V1164-75
V1164-75
E0540-80
E0540-80
V1164-75
V3819-75
7-51
Seals
AFLAS
Neoprene
Polyacrylate
Polyurethane
Butyl
Fluorosilicone
Silicone
Nitrile NBR
5700 Handbook
Fluorocarbon FKM
Hifluor FKM
Perfluoroelastomer FFKM
Neoprene/Chloroprene CR
Styrene-Butadiene SBR
Polyacrylate ACM
Polyurethane AU, EU
Butyl IIR
Butadiene BR
Isoprene IR
Natural Rubber NR
Hypalon CSM
Fluorosilicone FVMQ
V3819-75
E0540-80
E0540-80
E0540-80
V1164-75
V1164-75
V1164-75
V1164-75
E0540-80
E0540-80
V1164-75
V1164-75
N0674-70
V1164-75
E0540-80
E0540-80
E0540-80
E0540-80
E0540-80
Factory
N0674-70
V3819-75
V3819-75
N0674-70
V1164-75
N0674-70
N0674-70
N0602-70
N0602-70
N0602-70
X
3
3
3
4
4
2
2
3
3
2
2
1
4
4
3
4
3
3
X
1
X
X
1
2
1
1
1
2
2
X
3
3
3
4
4
2
2
3
3
2
2
1
4
4
3
4
3
3
X
1
X
X
1
2
1
1
1
2
2
X
1
1
1
4
4
4
4
1
1
4
4
4
4
1
1
1
1
1
X
4
X
X
4
4
4
4
4
4
4
X
3
3
3
1
1
1
1
3
3
1
1
1
2
2
3
2
3
3
X
1
X
X
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
X
1
2
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
X
1
2
1
1
1
1
1
1
1
1
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
1
1
1
4
4
4
4
1
1
4
4
2
2
4
1
3
1
1
X
2
X
X
4
4
2
4
2
4
4
X
1
1
1
4
4
4
4
1
1
4
4
4
4
4
1
4
1
1
X
4
X
X
4
4
4
4
4
4
4
X
4
4
4
4
4
4
4
4
4
4
4
1
4
4
4
4
4
4
X
X
X
X
1
2
1
2
1
3
3
X
4
4
4
4
4
3
3
4
4
3
3
1
X
4
4
4
4
4
X
3
X
X
1
4
1
4
1
2
2
X
1
1
1
4
4
4
4
1
1
4
4
4
4
1
1
1
1
1
X
3
X
X
4
4
4
4
4
4
4
X
1
1
1
4
4
4
4
1
1
4
4
4
4
4
1
4
1
1
X
4
X
X
4
4
4
4
4
4
4
X
1
1
1
4
4
4
4
1
1
4
4
4
4
4
1
4
1
1
X
4
X
X
4
4
4
4
4
4
4
X
1
1
1
4
4
4
4
1
1
4
4
4
4
4
1
4
1
1
X
4
X
X
4
4
4
4
4
4
4
X
1
1
1
4
4
4
4
1
1
4
4
2
2
4
1
4
1
1
X
3
X
X
4
4
4
4
2
4
4
X
1
1
1
2
2
2
2
1
1
2
2
1
2
2
1
1
1
1
X
2
X
X
1
2
1
2
1
2
2
X
2
2
2
4
4
X
X
2
2
X
X
2
X
3
2
3
2
2
X
4
X
X
4
4
4
4
4
4
4
N0674-70
N0674-70
N0674-70
N0674-70
N0674-70
N0674-70
N0674-70
N0674-70
N0674-70
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
X
X
X
X
X
X
X
X
X
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
4
X
X
X
X
X
X
X
X
4
X
X
X
X
X
X
X
X
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
X
1
1
1
1
1
1
1
1
X
1
1
1
1
1
1
1
1
X
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
7-52
Seals
AFLAS
Neoprene
Polyacrylate
Polyurethane
Butyl
Fluorosilicone
Silicone
Nitrile NBR
5700 Handbook
Fluorocarbon FKM
Hifluor FKM
Perfluoroelastomer FFKM
Neoprene/Chloroprene CR
Styrene-Butadiene SBR
Polyacrylate ACM
Polyurethane AU, EU
Butyl IIR
Butadiene BR
Isoprene IR
Natural Rubber NR
Hypalon CSM
Fluorosilicone FVMQ
N0674-70
N0674-70
N0674-70
E0540-80
N0674-70
N0674-70
N0674-70
V1164-75
V1164-75
N0674-70
N0674-70
E0540-80
E0540-80
V1164-75
Factory
Factory
E0540-80
1
1
1
2
1
1
1
2
2
1
1
2
3
X
X
X
3
1
1
1
2
1
1
1
2
2
1
1
2
3
X
X
X
3
1
1
1
1
1
1
1
4
4
4
4
1
1
X
X
X
1
1
1
1
3
1
1
1
1
1
1
1
4
3
1
X
X
3
1
1
1
1
1
1
1
1
1
1
1
1
1
1
X
X
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
X
X
1
X
X
X
1
X
X
X
X
X
X
X
X
X
X
X
X
X
1
1
1
2
1
1
1
4
4
2
2
2
1
X
X
X
1
1
1
2
X
1
1
1
4
4
4
4
2
1
X
X
X
1
X
X
X
X
X
X
X
4
4
1
1
X
4
X
X
X
4
X
X
X
X
X
X
X
3
3
1
1
X
4
X
X
X
4
1
1
1
X
1
1
1
4
4
4
4
1
1
X
X
X
1
1
1
2
X
1
1
1
4
4
4
4
1
1
X
X
X
1
1
1
2
X
1
1
1
4
4
4
4
1
1
X
X
X
1
1
1
2
X
1
1
1
4
4
4
4
1
1
X
X
X
1
1
1
2
X
1
1
1
4
4
2
4
1
1
X
X
X
1
1
1
1
X
1
1
1
2
2
1
1
4
1
X
X
X
1
1
1
1
X
1
1
1
X
X
4
4
4
2
X
X
X
2
E0540-80
E0540-80
N0674-70
N0674-70
V1164-75
N0674-70
N0674-70
E0540-80
E0540-80
E0540-80
V1164-75
V1164-75
V1164-75
V1164-75
V1164-75
V1164-75
E0540-80
E0540-80
3
3
1
1
2
1
1
1
2
2
2
2
2
2
2
2
3
3
3
3
1
1
2
1
1
1
2
2
2
2
2
2
2
2
3
3
1
1
4
4
4
3
1
1
2
1
4
4
4
4
4
4
1
1
3
3
1
1
1
1
1
1
3
3
1
1
1
1
1
1
3
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
X
X
X
X
X
X
1
X
X
1
X
X
X
X
X
X
X
X
1
1
2
2
4
3
1
1
2
2
4
4
4
4
4
4
1
2
1
1
4
4
4
4
X
1
2
X
4
4
4
4
4
4
1
1
4
4
1
1
4
1
X
1
4
X
4
4
4
4
4
4
4
2
4
4
1
1
3
X
X
1
4
X
3
3
3
3
3
3
4
4
1
1
4
4
4
3
X
1
2
X
4
4
4
4
4
4
1
2
1
1
4
4
4
4
X
1
2
X
4
4
4
4
4
4
1
2
1
1
4
4
4
4
X
1
2
X
4
4
4
4
4
4
1
2
1
1
4
4
4
4
X
1
2
X
4
4
4
4
4
4
1
2
1
1
2
2
4
X
X
1
X
X
4
4
4
4
4
4
1
2
1
1
1
1
2
1
X
1
3
X
2
2
2
2
2
2
1
2
2
2
2
2
4
1
X
3
3
X
X
X
X
X
X
X
2
2
E0667-70
E0540-80
N0674-70
3
1
1
3
2
1
1
1
4
4
2
1
1
1
1
1
1
1
X
X
X
2
2
2
1
1
4
X
4
1
X
4
1
2
1
4
X
1
4
X
1
4
2
1
4
2
1
4
4
1
1
3
1
4
7-53
Seals
AFLAS
Neoprene
Polyacrylate
Polyurethane
Butyl
Fluorosilicone
Silicone
Nitrile NBR
5700 Handbook
Fluorocarbon FKM
Hifluor FKM
Perfluoroelastomer FFKM
Neoprene/Chloroprene CR
Styrene-Butadiene SBR
Polyacrylate ACM
Polyurethane AU, EU
Butyl IIR
Butadiene BR
Isoprene IR
Natural Rubber NR
Hypalon CSM
Fluorosilicone FVMQ
N0508-75
N0674-70
N0674-70
V1164-75
N0674-70
N0674-70
N0674-70
1
1
1
2
1
1
1
1
1
1
2
1
1
1
1
1
4
4
1
1
4
1
1
1
1
1
4
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
X
1
X
X
X
X
X
1
1
2
4
2
1
2
1
X
4
4
1
1
4
4
X
1
X
2
4
1
4
X
1
X
1
4
3
1
X
4
4
1
1
3
1
X
4
4
1
1
4
1
X
4
4
1
1
4
1
X
4
4
1
1
4
1
X
4
4
1
1
3
1
X
1
1
1
1
2
1
X
4
4
1
1
4
N0674-70
V1164-75
E0540-80
V1164-75
1
4
3
4
1
1
3
4
1
4
1
4
1
1
4
1
1
1
1
1
1
1
1
1
X
X
X
X
1
4
4
4
1
4
4
4
1
4
4
4
1
4
4
4
1
4
4
4
1
4
4
4
1
4
4
4
1
4
4
4
1
4
4
4
1
1
4
1
1
4
4
4
N0674-70
E0540-80
E0540-80
N0674-70
E0540-80
E0540-80
E0540-80
E0540-80
V3819-75
E0540-80
V3819-75
N0674-70
N0674-70
E0540-80
N0674-70
N0674-70
V3819-75
E0540-80
N0674-70
E0540-80
N0674-70
1
2
3
1
3
3
3
3
X
3
X
1
1
3
1
1
X
3
1
3
1
1
2
3
1
3
3
3
3
X
3
X
1
1
3
1
1
X
3
1
3
1
1
1
1
1
1
1
1
1
X
1
X
1
1
1
1
1
X
1
1
1
1
1
4
3
1
3
3
3
3
X
3
X
1
1
3
1
1
X
3
1
3
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
1
2
1
1
1
1
1
1
X
1
X
X
X
1
1
1
X
1
1
1
1
1
4
1
1
1
1
1
1
X
1
X
1
1
1
1
1
X
1
2
1
2
X
4
4
4
4
4
4
4
X
4
X
4
4
4
4
4
X
4
4
4
4
X
4
4
X
4
4
4
4
X
4
X
X
X
4
1
1
X
4
4
4
4
1
1
1
1
1
1
1
1
X
1
X
1
1
1
1
1
X
1
1
1
1
1
4
1
1
1
1
1
1
X
1
X
1
1
1
1
1
X
1
2
1
2
1
1
1
1
1
1
1
1
X
1
X
1
1
1
1
1
X
1
2
1
2
1
1
1
1
1
1
1
1
X
1
X
1
1
1
1
1
X
1
2
1
2
1
4
1
1
1
1
1
1
X
1
X
1
1
1
1
1
X
1
1
1
1
1
4
1
1
1
1
1
1
X
1
X
1
1
1
1
1
X
1
1
1
1
X
4
2
X
2
2
2
2
X
2
X
X
X
2
1
1
X
2
1
2
1
7-54
Seals
AFLAS
Neoprene
Polyacrylate
Polyurethane
Butyl
Fluorosilicone
Silicone
Nitrile NBR
Specifications
5700 Handbook
Section VIII
Specifications
8.1 How To Order O-Rings and Other Parts ................................................................................................. 8-2
8.1.1 Parker Compound Numbering System ....................................................................................... 8-2
Table 8-2 Military Fluid Specification Description ................................................................ 8-3
Table 8-3 Military Rubber Specifications ............................................................................... 8-4
Table 8-4 AMS and NAS Rubber Specifications .................................................................... 8-5
Table 8-5 Compound Specifications For Commonly Used
SAE and ASTM Specifications .............................................................................. 8-6
8.2 International O-Ring Standards and Test Methods ................................................................................. 8-8
Germany ............................................................................................................................................... 8-8
International ......................................................................................................................................... 8-9
United Kingdom ................................................................................................................................... 8-9
France ................................................................................................................................................... 8-9
Italy ...................................................................................................................................................... 8-9
Sweden ................................................................................................................................................. 8-9
United States ........................................................................................................................................ 8-9
8.3 Ordering Addresses ................................................................................................................................. 8-9
8-1
Seals
Specifications
5700 Handbook
How to Or
der
Order
Note that there is only one base polymer and one hardness
associated with each basic number (i.e. there is not both
N0674-70 and N0674-90).
B
C
E
G
L
Letter Polymer
Polyacrylate,
Ethylene Acrylic
Butyl
Neoprene
Ethylene Propylene
SBR
Fluorosilicone
N
P
S
V
Nitrile, Hydrogenated,
Carboxylated
Polyurethane
Silicone
Fluorocarbon,
Perfluorinated
elastomer, AFLAS
8-2
Seals
durometer
hardness
Specifications
5700 Handbook
Parker
Fluid
O-Ring
Specification Compound
Description
MIL-L-2104
MlL-S-3136
MlL-L-3150
MlL-G-3278
MlL-O-3503
N0304-75
N0602-70
N0304-75
L1120-70
N0304-75
Oil, Engine
Standard Test Fluids, Hydrocarbon
Oil, Preservative
Aircraft Grease
Oil, Preservative
MlL-G-3545
MIL-G-4339
MIL-G-4343
MIL-J-5161
MIL-F-5566
N0304-75
N0304-75
N0304-75
N0602-70
E1235-80
Hi-Temperature Grease
Soluble Oil
Pneumatic System Grease
Jet Fuel, Referee
Isopropyl Alcohol
MIL-G-5572
N0602-70
MlL-H-5606
(1)
MlL-T-5624
MlL-L-6081
MlL-L-6082
N0602-70
N0304-75
N0304-75
MlL-H-6083
MlL-L-6085
MlL-A-6091
MlL-L-6387
N0304-75
V1164-75
E1235-80
V1164-74
MlL-C-7024
MlL-H-7083
MlL-G-7118
MlL-G-7187
MLO-7277
N0602-70
E1235-80
N0304-75
N0304-75
V1164-75
MlL-G-7421
L1120-70
MLO-7557
V1164-75
MlL-G-7711
MlL-L-7808
N0304-75
V1164-75
MlL-L-7870
N0304-75
MlL-C-8188
V1164-75
MLO-8200
V1164-75
MlL-H-8446
V1164-75
MLO-8515
V1164-75
MlL-L-9000
MlL-L-9236
N0304-75
V1164-75
MlL-E-8500
E1235-80
MIL-G-10924 N0304-75
MIL-H-13910 E1235-80
MIL-L-15017 N0304-75
MIL-G-15793 N0304-75
MIL-F-16884 N0304-75
MlL-F-17111 N0304-75
MlL-L-17331 V1164-75
MlL-H-19457 E1235-80
MlL-L-21260
N0304-75
MlL-S-21568 E1235-80
MlL-H-22251 E1235-80
MlL-L-23699 V1164-75
MlL-G-23827 N0602-70
MlL-G-25013 V1164-75
MlL-G-25537 N0304-75
MIL-F-25558
MlL-C-25576
MlL-F-25656
MlL-L-25681
N0602-70
N0602-70
N0602-70
V1164-75
MlL-G-25760 V1164-75
MlL-P-27402 E1235-80
MlL-H-27601 V1164-75
MlL-L-46167
N0304-75
MIl-H-46170
V1164-75
MIL-F-81912 V1164-75
MlL-F-82522 N0602-75
MIL-T-83133 47-071
MIL-H-83282 (2)
MIL-H-87257 (2)
Description
Ethylene Glycol, Technical,
Uninhibited
Automotive Grease
Hydraulic Fluid, Non-petroleum
Automotive Brake
Oil, Hydraulic
Grease, Instrument
Fuel Oil, Diesel, Marine
Power Transmission Fluid
Lubricating Oil, Non-corrosive,
Steam Turbine
Fire Resistant Hydraulic Fluid
(phosphate-ester base)
Lubricating Oil, Engine,
Preservative
Silicone Fluid, Dimethyl
Polysiloxane
Hydrazine Solution, 22%
Lubricating Oil, Aircraft
Turbine Engine, Synthetic Base
Grease, Aircraft and Instrument
Bearing Grease, Extreme High
Temperature
Aircraft, Helicopter Oscillating
Bearing Grease
Fuel, Ram Jet (RJ1)
Rocket and Ram Jet Fuel (RP1)
Jet Fuel, Grade JP6
Oil, Moly Disulphide, Silicone Base
High Temperature
Bearing Grease, Wide Temp. Range
Propellent, Aerozine-50
Hydraulic Fluid, Petroleum Base,
High Temperature, Flight Vehicle
Lubricating Oil, Internal
Combustion Engine, Arctic
Hydraulic Fluid, Rust Inhibited,
Fire Resistant, Synthetic
Fuel, Expendable, Turbine Engine
Fuel, Ramjet Engine, T-H Dimer
Grade RJ-4
Turbine Fuel, Aviation, Kerosene
Type, Grade JP-8
Hydraulic Fluid, Fire Resistant,
Synthetic Hydrocarbon Base,
Aircraft
Hydraulic Fluid, Fire Resistant,
Synthetic Hydrocarbon Base,
Aircraft, Low Temperature
Seals
Specifications
5700 Handbook
Parker
Compound
Description
ZZ-R-765E
Class
Grade
Temperature Range(2)
1a. 1b. 2a. 2b.
40
S1198-40 - 103 to 437F (-75 to 225C)
1a. 1b. 2a. 2b.
50
S0899-50 - 103 to 437F (-75 to 225C)
1a. 1b
70
S0383-70 - 103 to 437F (-75 to 225C)
2a. 2b
80
S0614-80 - 80 to 437F (-62 to 225C)
2a. 2b
70
S1224-70 - 80 to 437F (-62 to 225C)
Rubber, Silicone
Low and High Temperature Resistant, Low Compression Set
Low and High Temperature Resistant, Low Compression Set
Low Temperature Resistant, Low Compression Set
High Temperature Resistant, Low Compression Set
High Temperature Resistant, Low Compression Set
Type I
Class 1
Type II
Class 2
C0267-50
G0244-70
Type I
Grade B
N0602-70
MIL-P-5315B - Packing, O-ring, Hydrocarbon Fuel Resistant (Jet Fuels) (Military O-ring series MS29512 and MS29513)
N0602-70
MIL-P-5510C - Gasket, Straight Thread Tube Fitting Boss (MIL-H-5606 Petroleum Based Hydraulic Fluid,
N0507-90
(-45 to 160F) (-43 to 71C)(2) (Military O-ring series MS28778)
MIL-R-6855D - Synthetic Rubber Sheets, Strips, Molded or Extruded Shapes (-65 to 212F) (-54 to 100C)(2)
Class 1Grade 60
N0406-60
Fuel and Petroleum Oil Resistant
Class 2 Type B Grade 70 C1124-70
Petroleum Oil, Weather and Ozone Resistant
MIL-R-7362D - Rubber, Sheet, Molded and Extruded Shapes, Synthetic Oil Resistant (AMS3021)
Types I, II
47-071 Synthetic, Di-Ester Base Lubricant (-65 to 275F) (-54 to 135C)(2)
(Military O-ring series MS29561 and WAS617)
MIL-G-21569B - Gaskets, Cylinder Liner Seal, Synthetic
Class I
N0674-70(1)
Class II
S0604-70
E0515-80
MIL-R-83248C, Type I - Rubber, Fluorocarbon Elastomer, High Temperature Fluid and Compression
Class I
V0747-75, V1164-75, V1226-75
Set Resistant (-15 to 400F) (-5 to 105C)
Class 2
V0709-90
MIL-R-83485
8-4
Seals
Specifications
5700 Handbook
Description
Durometer
Title
AMS3201
AMS3205
AMS3208
AMS3209
AMS3212
N0545-40
N0299-50
C0267-50
C1124-70
N0525-60
35-45
45-55
45-55
65-75
55-65
AMS3238
AMS3240
AMS3301
AMS3302
AMS3303
B0318-70
C0356-45
S0469-40
S0595-50
S0613-60
65-75
35-45
35-45
45-55
55-65
AMS3304
AMS3305
AMS3325
AMS3337
S1224-70
S0614-80
L1223-60
S0383-70
65-75
75-85
55-65
65-75
AMS3345
AMS3357
AMS7257
AMS7259
AMS7267
AMS7271
S0899-55
S1224-70
V8545-75
V0709-90
S0355-75
N0506-65
45-55
65-75
70-80
85-95
70-80
60-70
Silicone Rubber
Silicone Rubber, Lubricating Oil, Compression Set Resistant
Sealing Rings, Perfluorocarbon, High Temperature Resistant
High Temp, Fluid Resistant, Very Low Compression Set FKM
Silicone, Heat Resistant, Low Compression Set
Fuel and Low Temperature Resistant
AMS7272
AMS7276
NAS1613
N0287-70
V1164-75
E1267-80, E1235-80
65-75
70-80
75-85
AMS-P-5315
AMS-P-5510
AMS-R-6855
N0602-70
N0507-90
N0406-60, C1124-70
65-75
85-95
55-75
AMS-R-7362 47-071
AMS-P-25732 N0304-75
65-75
70-80
70-80
Note: When ordering parts made with military, AMS, or NAS specification material, see section on ordering.
(1)Aerospace Material Specification issued by the Society of Automotive Engineers, Inc.
(2)National Aerospace Standard issued by Aerospace Industries Association of America, Inc.
8-5
Seals
Specifications
5700 Handbook
ASTM D2000-97
Specification
M2AA708 A13 EA14 F17
M2AA710 A13 B13 F17
M2AA810 A13 EA14 F17 Z1 (Purple)
M2AA810 A13 EA14 F17
M2AA810 A13 EA14 F17
M2AA907 A13 EA14 F17
M2BC410 A14 B14 EO14 EO34 F17 Z1 (45 5 Type A Durometer)
M2BC510 A14 B14 EO14 EO34 F17
M3BC614 A14 B14 EO14 EO34 F17
M3BC710 A14 B14 EP14 EO34
M3BC714 A14 B14 EO14 EO34 F17
M2BE510 A14 B14 EO14 EO34 F17
M2BE614 A14 B14 EO14 EO34 F17
M3BE710 A14 B14 EO14 EO34
M2BE714 A14 B14 EO14 EO34 F17
M2BF714 B34 EO14 EO34
M2BG410 B34 EA14 EF11 EF21 EO14 EO34
M5BG410 A14 B34 EO14 EO34
M2BG510 B14 EA14 EF11 EF21 EO14 EO34 F17
M2BG510 B14
M2BG608 B34 EA14 EO14 F17 Z1 (65 5 Type A Durometer)
M2BG614 B34 EA14 EF11 EF21 EO14 EO34 F17
M2BG708 EA14 EF11 EF21 EO14 EO34 F17
M2BG708 EF11 EF21 EO34 F17
M5BG710 A14 B14
M2BG710 B14 B34 EA14 EF11 EF21
M2BG710 B34 EA14 EF21 EO14 EO34 F17 Z1 (Molydisulfide filled)
M2BG714 B14 B34 EA14 EF11 EF21 EO14 EO34
M(5)BG714 A14 B14 B34 EO14 EO34
M2BG714 B14 B34 EA14 EF11 EF21 EO34 F17
M4BG721 B14 EO14 EO34
M7BG810 EA14 EF11 EF21 EO14 EO34 Z1 (75 5 Type A Durometer) Z2 (1)
M7BG810 EA14 EF11 EO14 EO34 F16 Z1 (75 5 Type A Durometer)
M7BG814 EA14 EF11 EO14 EO34 Z1 (85 5 Type A Durometer) Z2 (Graphite filled)
M6BG910 A14 EO14 EO34
M7BG910 B14 EA14 EF11 EF21 EO14 EO34 F16
M2BG910 B14 EA14 EF21 EO14 EO34
M7BG910 EA14 EF11 EF21 EO14 EO34
M(2)CA614 A25 B44
M4CA714 A25 B35 EA14 F17 G21
M8CA814 A25 B35 EA14 F17
R810BF2
R810BF2
SC515BE1E3F2
SC615BE1E3F1
SC715BE3F1
SC715BE3F2
SB415BE1E3F1
SB515BE1E3F2
SB712BE1F2
SB620BE1F1
SB715BE1E3F1
SB715BE1E3F2
SB708E1E3F2
SB820BE1E3
SB915E1E3
SB915BE1E3
Parker
Compound
Number
E0603-70
G0244-70
E0893-80
E0515-80
E0540-80
E0652-90
C0356-45
C0267-50
C0518-70
C0873-70
C0147-70
C0267-50
C0518-60
C0873-70
C0147-70
N0674-70
N0545-40
N0545-40
N0299-50
N0299-50
N0506-65
N0525-60
N0602-70
47-071
N0497-70
N0497-70
N0163-70
N0674-70
N0103-70
N0103-70
P0642-70
N0951-75
N0304-75
N0258-85
P0648-90
N0507-90
N0552-90
P0648-90
E0529-60
E0803-70
E0810-80
Prefix (grade) numbers and suffix letters in parenthesis are technically not permitted, but nevertheless, they describe a property of the material.
Explanations in parenthesis apply to the Z suffix letters.
(1) Compression Set = 20% max. after 70 hours at 125C when tested on plied discs per ASTM D395.
Table 8-5: Compound Selectons for Commonly Used SAE and ASTM Specifications
8-6
Seals
Specifications
5700 Handbook
ASTM D2000-97
Specification
M2CH608 A25 B34 F17 Z1 (65 5 Type A Durometer)
M3CH708 A25 EO16 EO36
M2CH708 A25 EO35 F17
M3CH710 A25 B34 EO16 EO36 Z1 (Molydisulfide filled)
M3CH714 A25 B34 EO16 EO36
M3CH810 A25 EO16 Z1 (70 5 Type A Durometer) Z2 (1)
M3CH810 A25 EO16 Z1 (75 5 Type A Durometer)
M3CH910 B34 EO16 EO36
M3DA810 A26 B36 EA14
M3DH710 A26 B16 EO16 EO36 F13
M2FK606 A19 EA36
M2GE405 A19 B37 EA14 EO16 EO36 F19 G11
M3GE503 A19 B37 EA14 EO16 EO36 F19 G11
M3GE603 A19 B37 EA14 EO16 EO36 F19 G11
M7GE705 A19 B37 EA14 EO16 EO36 F19 G11
A7GE705 A19 B37 EA14 EO16 EO36 F19 G11
M6GE803 A19 B37 EA14 EO16 EO36 F19 G11
M2HK710 A1 - 10 B37 B38 EF31 EO78 F15 Z1 (75 5 Type A Durometer)
M2HK710 A1 - 10 B37 B38 EF31 EO78 F15 Z1 (75 5 Type A Durometer) Z2 (Brown)
M4HK710 A1 - 11 B38 EF31 EO78 Z1 (75 5 Type A Durometer)
M4HK710 A1 - 11 B38 EF31 EO78 Z1 (75 5 Type A Durometer) Z2 (Brown)
M3HK910 A1 - 10 B37 EF31 EO78
M3HK910 A1 - 10 B37 B38 EF31 EO78 Z1 (Brown)
M5HK910 A1 - 11 B38 EF31 EO78 F15
M5HK910 A1 - 11 B38 EF31 EO78 F15 Z1 (Brown)
SAE 120R1 Class 2
SAE J515 Type 1
SAE J515 Type 2
TB715E1E3
TA507BE1E3F2
TA605BE1E3F2
TA705BE1E3F2
TA705BE1E3F2
TA805BE1E3F2
Parker
Compound
Number
N0506-65
N0497-70
47-071
N0163-70
N0674-70
N0951-75
N0304-75
N0552-90
E0540-80
A1107-70
L1223-60
S0469-40
S0595-50
S0613-60
S0455-70
S1224-70
S0614-80
V1164-75
V1226-75
V1164-75
V1226-75
V0709-90
V0894-90
V0709-90
V0894-90
N0497-70
N0552-90
E0652-90
Prefix (grade) numbers and suffix letters in parenthesis are technically not permitted, but nevertheless, they describe a property of the material.
Explanations in parenthesis apply to the Z suffix letters.
(1) Compression Set = 20% max. after 70 hours at 125C when tested on plied discs per ASTM D395.
Table 8-5: Compound Selectons for Commonly Used SAE and ASTM Specifications (Continued)
8-7
Seals
Specifications
5700 Handbook
DIN 51 600
Liquid fuels, leaded petroleum oils; minimum requirements.
DIN 51 601
Liquid fuels, Diesel oil; minimum requirements.
DIN 51 603 Part 1
Liquid fuels; heating oils, heating oil EL; minimum
requirements.
DIN 51 603 Part 2
Liquid fuels; heating oils, heating oils L. M and S;
minimum requirements.
DIN 53 479
Testing of plastics and elastomers; measurement of
specific gravity.
DIN 53 504
Testing of elastomers; measurement of tensile strength,
maximum stress, elongation at break and stress values at
tensile test.
DIN 53 505
Testing of elastomers; Shore A and D hardness tests.
DIN 53 507
Testing of elastomers; determination of tear growth,
strip specimen.
DIN 53 512
Testing of rubbers; determination of rebound resilience.
DIN 53 516
Testing of rubbers and elastomers; determination of
abrasion resistance.
DIN 53 517
Testing of elastomers - determination of compression
set.
DIN 53 519 Part 1
Testing of elastomers; determination of indentation
hardness of soft rubber (IRHD),hardness test on samples.
DIN 53 519 Part 2
Testing of elastomers; determination of indentation
hardness of soft rubber (IRHD), microhardness on
samples of minor dimensions.
DIN 53 521
Testing of rubber and elastomers; determination of the
resistance to liquids, vapors and gases.
DIN 53 522
Testing of elastomers; determination of resistance to
flex-cracking and crack growth.
DIN 53 538
Standard reference elastomer; nitrile-butadiene rubber
(NBR), cross-linked by peroxide to characterize working fluids with respect to their reaction on NBR.
8-8
Seals
Specifications
5700 Handbook
France
The following French standards base upon ISO 3601
Parts 1 to 3:
NF-T-47-501 is comparable with ISO 3601 Part 1.
NF-T-47-502 is comparable with ISO 3601 Part 2.
NF-T-47-503 is comparable with ISO 3601 Part 3.
French purchase codes R 1 to R 27 are identical with
Parker sizes 5-578 to 5-606. R 28 to R 88 are identical
with Parker sizes 2-325 to 2-349 and 2-425 to 2-460. For
more details, cf European O-ring codes, Table 11.1.
Italy
A committee for seal and hose standardization exists in
the UNI which recommends the use of the American AS
568 A standard specification.
In certain areas the French R 1 to R 88 are used.
Sweden
International
ISO 3601/1
Fluid systems, O-rings - Part 1. Inner diameters, crosssections, tolerances and size coding.
ISO 3601/2 (under preparation)
Fluid systems, O-rings - Part 2. Design criteria for
O-ring grooves.
ISO 3601/3 (under preparation)
Fluid systems. O-rings - Part 3. Quality acceptance
levels.
ISO 3601/4 (under preparation)
Fluid systems, O-rings - Part 4. O-ring grooves with
back-up rings.
ISO 3601/5 (under preparation)
Fluid systems, O-rings - Part 5. O-rings for connectors
to ISO 6149.
United States
AS 568 A (Aerospace Standard)
Published by the SAE (Society of Automotive Engineers) specifies sizes and tolerances.
The cross-section tolerances correspond to ISO 3601/1
and DIN 3771 Part 1 (within a few hundredths of a
millimeter), see Table 11.1, Cross Reference List.
United Kingdom
BS 1806
Specifies dimensions (inches) for inner diameters and
cross-sections and their tolerances including grooves.
O-ring dimensions are identical with the Parker 2-xxx
series. Table 11.1 gives a cross-reference among the
various European standard specifications.
BS 4518
Specifies dimensions and tolerances together with groove
dimensions. Cross-section diameters are: 1.6 / 2.4 / 3.0 / 5.7
and 8.4 mm
8-9
Seals
Sizes
5700 Handbook
Section IX
Sizes
Parker Series 2-XXX O-Ring Sizes .............................................................................................................. 9-2
Parker Series 3-XXX O-Ring Sizes ........................................................................................................... .9-11
Parker Series 5-XXX O-Ring Sizes ........................................................................................................... .9-12
Series 5- XXX Locator Table...................................................................................................................... 9-17
ISO 3601-1, Series A Sizes ......................................................................................................................... 9-19
ISO 3601-1, Series G Sizes ......................................................................................................................... 9-20
JIS B2401 Sizes .......................................................................................................................................... 9-21
9-1
Seals
Sizes
5700 Handbook
Parker
Size No.
(Size Only)
(a)
Size
Only
Nominal
Size
(Ref.
Only)
(Size Only)
(Inches)
AS 568A
Uniform
(Ref. Only)
Tolerance
I.D.
Basic
Volume
Cu. In.
Parker
Size No.
(Size Only)
Tolerance
Dash No.
I.D.
O.D.
W.
2-001
2-002
2-003
2-004
2-005
2-006
2-007
2-008
2-009
2-010
2-011
2-012
2-013
2-014
2-015
-001
-002
-003
-004
-005
-006
-007
-008
-009
-010
-011
-012
-013
-014
-015
1/32
3/64
1/16
5/64
3/32
1/8
5/32
3/16
7/32
1/4
5/16
3/8
7/16
1/2
9/16
3/32
9/64
3/16
13/64
7/32
1/4
9/32
5/16
11/32
3/8
7/16
1/2
9/16
5/8
11/16
1/32
3/64
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
.029
.042
.056
.070
.101
.114
.145
.176
.208
.239
.301
.364
.426
.489
.551
.004
.004
.004
.005
.005
.005
.005
.005
.005
.005
.005
.005
.005
.005
.007
.040
.050
.060
.070
.070
.070
.070
.070
.070
.070
.070
.070
.070
.070
.070
.003
.003
.003
.003
.003
.003
.003
.003
.003
.003
.003
.003
.003
.003
.003
.0003
.0006
.0010
.0017
.0021
.0022
.0026
.0030
.0034
.0037
.0045
.0052
.0060
.0068
.0075
I.D.
0,74
1,07
1,42
1,78
2,57
2,90
3,68
4,47
5,28
6,07
7,65
9,25
10,82
12,42
14,00
0,10
0,10
0,10
0,13
0,13
0,13
0,13
0,13
0,13
0,13
0,13
0,13
0,13
0,13
0,18
1,02
1,27
1,52
1,78
1,78
1,78
1,78
1,78
1,78
1,78
1,78
1,78
1,78
1,78
1,78
0,08
0,08
0,08
0,08
0,08
0,08
0,08
0,08
0,08
0,08
0,08
0,08
0,08
0,08
0,08
2-001
2-002
2-003
2-004
2-005
2-006
2-007
2-008
2-009
2-010
2-011
2-012
2-013
2-014
2-015
2-016
2-017
2-018
2-019
2-020
-016
-017
-018
-019
-020
5/8
11/16
3/4
13/16
7/8
3/4
13/16
7/8
15/16
1
1/16
1/16
1/16
1/16
1/16
.614
.676
.739
.801
.864
.009
.009
.009
.009
.009
.070
.070
.070
.070
.070
.003
.003
.003
.003
.003
.0083
.0090
.0098
.0105
.0113
15,60
17,17
18,77
20,35
21,95
0,23
0,23
0,23
0,23
0,23
1,78
1,78
1,78
1,78
1,78
0,08
0,08
0,08
0,08
0,08
2-016
2-017
2-018
2-019
2-020
2-021
2-022
2-023
2-024
2-025
-021
-022
-023
-024
-025
15/16
1
1 1/16
1 1/8
1 3/16
1 1/16
1/8
1 3/16
1 1/4
1 5/16
1/16
1/16
1/16
1/16
1/16
.926
.989
1.051
1.114
1.176
.009
.010
.010
.010
.011
.070
.070
.070
.070
.070
.003
.003
.003
.003
.003
.0120
.0128
.0136
.0143
.0151
23,52
25,12
26,70
28,30
29,87
0,23
0,25
0,25
0,25
0,28
1,78
1,78
1,78
1,78
1,78
0,08
0,08
0,08
0,08
0,08
2-021
2-022
2-023
2-024
2-025
2-026
2-027
2-028
2-029
2-030
2-031
2-032
2-033
2-034
2-035
2-036
2-037
2-038
2-039
2-040
-026
-027
-028
-029
-030
-031
-032
-033
-034
-035
-036
-037
-038
-039
-040
1 1/4
1 5/16
1 3/8
1 1/2
1 5/8
1 3/4
1 7/8
2
2 1/8
2 1/4
2 3/8
2 1/2
2 5/8
2 3/4
2 7/8
1 3/8
1 7/16
1 1/2
1 5/8
1 3/4
1 7/8
2
2 1/8
2 1/4
2 3/8
2 1/2
2 5/8
2 3/4
2 7/8
3
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1.239
1.301
1.364
1.489
1.614
1.739
1.864
1.989
2.114
2.239
2.364
2.489
2.614
2.739
2.864
.011
.011
.013
.013
.013
.015
.015
.018
.018
.018
.018
.018
.020
.020
.020
.070
.070
.070
.070
.070
.070
.070
.070
.070
.070
.070
.070
.070
.070
.070
.003
.003
.003
.003
.003
.003
.003
.003
.003
.003
.003
.003
.003
.003
.003
.0158
.0166
.0173
.0188
.0204
.0219
.0234
.0249
.0264
.0279
.0294
.0309
.0324
.0340
.0355
31,47
33,05
34,65
37,82
41,00
44,17
47,35
50,52
53,70
56,87
60,05
63,22
66,40
69,57
72,75
0,28
0,28
0,33
0,33
0,33
0,38
0,38
0,46
0,46
0,46
0,46
0,46
0,51
0,51
0,51
1,78
1,78
1,78
1,78
1,78
1,78
1,78
1,78
1,78
1,78
1,78
1,78
1,78
1,78
1,78
0,08
0,08
0,08
0,08
0,08
0,08
0,08
0,08
0,08
0,08
0,08
0,08
0,08
0,08
0,08
2-026
2-027
2-028
2-029
2-030
2-031
2-032
2-033
2-034
2-035
2-036
2-037
2-038
2-039
2-040
(a) The rubber compound must be added when ordering by the 2-size number (i.e., 2-007 N0674-70).
(b) This chart provides dimensions for standard (AN) shrinkage materials ONLY. These correspond to AS568A
dimensions. O-rings manufactured out of compounds with different shrinkage rates (other than AN) will produce
slightly different dimensions and tolerances. For more information on shrinkage rates, see the Appendix.
(c) When ordering O-rings to a Military, AMS or NAS material Specification, see Section VIII, Specifications, for more
information.
(a)
Seals
Sizes
5700 Handbook
Parker
Size No.
(Size Only)
(a)
Size
Only
Nominal
Size
(Ref.
Only)
(Size Only)
(Inches)
AS 568A
Uniform
(Ref. Only)
Dash No.
I.D.
Tolerance
I.D.
Basic
Volume
Cu. In.
Parker
Size No.
(Size Only)
Tolerance
O.D.
W.
2-041
2-042
2-043
2-044
2-045
2-046
2-047
2-048
2-049
2-050
2-102
2-103
2-104
2-105
2-106
-041
-042
-043
-044
-045
-046
-047
-048
-049
-050
-102
-103
-104
-105
-106
3
3 1/4
3 1/2
3 3/4
4
4 1/4
4 1/2
4 3/4
5
5 1/4
1/16
3/32
1/8
5/32
3/16
3 1/8
3 3/8
3 5/8
3 7/8
4 1/8
4 3/8
4 5/8
4 7/8
5 1/8
5 3/8
1/4
9/32
5/16
11/32
3/8
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
3/32
3/32
3/32
3/32
3/32
2.989
3.239
3.489
3.739
3.989
4.239
4.489
4.739
4.989
5.239
.049
.081
.112
.143
.174
.024
.024
.024
.027
.027
.030
.030
.030
.037
.037
.005
.005
.005
.005
.005
.070
.070
.070
.070
.070
.070
.070
.070
.070
.070
.103
.103
.103
.103
.103
.003
.003
.003
.003
.003
.003
.003
.003
.003
.003
.003
.003
.003
.003
.003
.0370
.0400
.0430
.0460
.0491
.0521
.0551
.0581
.0612
.0642
.0040
.0048
.0056
.0064
.0072
75,92
82,27
88,62
94,97
101,32
107,67
114,02
120,37
126,72
133,07
1,24
2,06
2,84
3,63
4,42
I.D.
0,61
0,61
0,61
0,69
0,69
0,76
0,76
0,76
0,94
0,94
0,13
0,13
0,13
0,13
0,13
1,78
1,78
1,78
1,78
1,78
1,78
1,78
1,78
1,78
1,78
2,62
2,62
2,62
2,62
2,62
0,08
0,08
0,08
0,08
0,08
0,08
0,08
0,08
0,08
0,08
0,08
0,08
0,08
0,08
0,08
2-041
2-042
2-043
2-044
2-045
2-046
2-047
2-048
2-049
2-050
2-102
2-103
2-104
2-105
2-106
2-107
2-108
2-109
2-110
2-111
-107
-108
-109
-110
-111
7/32
1/4
5/16
3/8
7/16
13/32
7/16
1/2
9/16
5/8
3/32
3/32
3/32
3/32
3/32
.206
.237
.299
.362
.424
.005
.005
.005
.005
.005
.103
.103
.103
.103
.103
.003
.003
.003
.003
.003
.0081
.0089
.0105
.0122
.0138
5,23
6,02
7,59
9,19
10,77
0,13
0,13
0,13
0,13
0,13
2,62
2,62
2,62
2,62
2,62
0,08
0,08
0,08
0,08
0,08
2-107
2-108
2-109
2-110
2-111
2-112
2-113
2-114
2-115
2-116
-112
-113
-114
-115
-116
1/2
9/16
5/8
11/16
3/4
11/16
3/4
13/16
7/8
15/16
3/32
3/32
3/32
3/32
3/32
.487
.549
.612
.674
.737
.005
.007
.009
.009
.009
.103
.103
.103
.103
.103
.003
.003
.003
.003
.003
.0154
.0171
.0187
.0203
.0220
12,37
13,94
15,54
17,12
18,72
0,13
0,18
0,23
0,23
0,23
2,62
2,62
2,62
2,62
2,62
0,08
0,08
0,08
0,08
0,08
2-112
2-113
2-114
2-115
2-116
2-117
2-118
2-119
2-120
2-121
2-122
2-123
2-124
2-125
2-126
2-127
2-128
2-129
2-130
2-131
-117
-118
-119
-120
-121
-122
-123
-124
-125
-126
-127
-128
-129
-130
-131
13/16
7/8
15/16
1
1 1/16
1 1/8
1 3/16
1 1/4
1 5/16
1 3/8
1 7/16
1 1/2
1 9/16
1 5/8
1 11/16
1
1 1/16
1 1/8
1 3/16
1 1/4
1 5/16
1 3/8
1 7/16
1 1/2
1 9/16
1 5/8
1 11/16
1 3/4
1 13/16
1 7/8
3/32
3/32
3/32
3/32
3/32
3/32
3/32
3/32
3/32
3/32
3/32
3/32
3/32
3/32
3/32
.799
.862
.924
.987
1.049
1.112
1.174
1.237
1.299
1.362
1.424
1.487
1.549
1.612
1.674
.010
.010
.010
.010
.010
.010
.012
.012
.012
.012
.012
.012
.015
.015
.015
.103
.103
.103
.103
.103
.103
.103
.103
.103
.103
.103
.103
.103
.103
.103
.003
.003
.003
.003
.003
.003
.003
.003
.003
.003
.003
.003
.003
.003
.003
.0236
.0253
.0269
.0285
.0302
.0318
.0334
.0351
.0367
.0383
.0400
.0416
.0432
.0449
.0465
20,30
21,89
23,47
25,07
26,64
28,24
29,82
31,42
32,99
34,59
36,17
37,77
39,34
40,94
42,52
0,25
0,25
0,25
0,25
0,25
0,25
0,30
0,30
0,30
0,30
0,30
0,30
0,38
0,38
0,38
2,62
2,62
2,62
2,62
2,62
2,62
2,62
2,62
2,62
2,62
2,62
2,62
2,62
2,62
2,62
0,08
0,08
0,08
0,08
0,08
0,08
0,08
0,08
0,08
0,08
0,08
0,08
0,08
0,08
0,08
2-117
2-118
2-119
2-120
2-121
2-122
2-123
2-124
2-125
2-126
2-127
2-128
2-129
2-130
2-131
(a) The rubber compound must be added when ordering by the 2-size number (i.e., 2-007 N0674-70).
(b) This chart provides dimensions for standard (AN) shrinkage materials ONLY. These correspond to AS568A dimensions.
O-rings manufactured out of compounds with different shrinkage rates (other than AN) will produce slightly different
dimensions and tolerances. For more information on shrinkage rates, see the Appendix.
(c) When ordering O-rings to a Military, AMS or NAS material Specification, see Section VIII, Specifications, for more
information.
(a)
Seals
Sizes
5700 Handbook
Parker
Size No.
(Size Only)
(a)
Size
Only
Nominal
Size
(Ref.
Only)
(Size Only)
(Inches)
AS 568A
Uniform
(Ref. Only)
Dash No.
I.D.
O.D.
Tolerance
W.
I.D.
Basic
Volume
W
Cu. In.
Parker
Size No.
(Size Only)
Tolerance
I.D.
(a)
2-132
2-133
2-134
2-135
2-136
-132
-133
-134
-135
-136
1 3/4
1 13/16
1 7/8
1 15/16
2
1 15/16
2
2 1/16
2 1/8
2 3/16
3/32
3/32
3/32
3/32
3/32
1.737
1.799
1.862
1.925
1.987
.015
.015
.015
.017
.017
.103
.103
.103
.103
.103
.003
.003
.003
.003
.003
.0482
.0498
.0514
.0531
.0547
44,12
45,69
47,29
48,90
50,47
0,38
0,38
0,38
0,43
0,43
2,62
2,62
2,62
2,62
2,62
0,08
0,08
0,08
0,08
0,08
2-132
2-133
2-134
2-135
2-136
2-137
2-138
2-139
2-140
2-141
2-142
2-143
2-144
2-145
2-146
2-147
2-148
2-149
2-150
2-151
2-152
2-153
2-154
2-155
2-156
-137
-138
-139
-140
-141
-142
-143
-144
-145
-146
-147
-148
-149
-150
-151
-152
-153
-154
-155
-156
2 1/16
2 1/8
2 3/16
2 1/4
2 5/16
2 3/8
2 7/16
2 1/2
2 9/16
2 5/8
2 11/16
2 3/4
2 13/16
2 7/8
3
3 1/4
3 1/2
3 3/4
4
4 1/4
2 1/4
2 5/16
2 3/8
2 7/16
2 1/2
2 9/16
2 5/8
2 11/16
2 3/4
2 13/16
2 7/8
2 15/16
3
3 1/16
3 3/16
3 7/16
3 11/16
3 15/16
4 3/16
4 7/16
3/32
3/32
3/32
3/32
3/32
3/32
3/32
3/32
3/32
3/32
3/32
3/32
3/32
3/32
3/32
3/32
3/32
3/32
3/32
3/32
2.050
2.112
2.175
2.237
2.300
2.362
2.425
2.487
2.550
2.612
2.675
2.737
2.800
2.862
2.987
3.237
3.487
3.737
3.987
4.237
.017
.017
.017
.017
.020
.020
.020
.020
.020
.020
.022
.022
.022
.022
.024
.024
.024
.028
.028
.030
.103
.103
.103
.103
.103
.103
.103
.103
.103
.103
.103
.103
.103
.103
.103
.103
.103
.103
.103
.103
.003
.003
.003
.003
.003
.003
.003
.003
.003
.003
.003
.003
.003
.003
.003
.003
.003
.003
.003
.003
.0564
.0580
.0596
.0612
.0629
.0645
.0662
.0678
.0694
.0711
.0727
.0743
.0760
.0776
.0809
.0874
.0940
.1005
.1071
.1136
52,07
53,64
55,25
56,82
58,42
59,99
61,60
63,17
64,77
66,34
67,95
69,52
71,12
72,69
75,87
82,22
88,57
94,92
101,27
107,62
0,43
0,43
0,43
0,43
0,51
0,51
0,51
0,51
0,51
0,51
0,56
0,56
0,56
0,56
0,61
0,61
0,61
0,71
0,71
0,76
2,62
2,62
2,62
2,62
2,62
2,62
2,62
2,62
2,62
2,62
2,62
2,62
2,62
2,62
2,62
2,62
2,62
2,62
2,62
2,62
0,08
0,08
0,08
0,08
0,08
0,08
0,08
0,08
0,08
0,08
0,08
0,08
0,08
0,08
0,08
0,08
0,08
0,08
0,08
0,08
2-137
2-138
2-139
2-140
2-141
2-142
2-143
2-144
2-145
2-146
2-147
2-148
2-149
2-150
2-151
2-152
2-153
2-154
2-155
2-156
2-157
2-158
2-159
2-160
2-161
-157
-158
-159
-160
-161
4 1/2
4 3/4
5
5 1/4
5 1/2
4 11/16
4 15/16
5 3/16
5 7/16
5 11/16
3/32
3/32
3/32
3/32
3/32
4.487
4.737
4.987
5.237
5.487
.030
.030
.035
.035
.035
.103
.103
.103
.103
.103
.003
.003
.003
.003
.003
.1202
.1267
.1332
.1398
.1463
113,97
120,32
126,67
133,02
139,37
0,76
0,76
0,89
0,89
0,89
2,62
2,62
2,62
2,62
2,62
0,08
0,08
0,08
0,08
0,08
2-157
2-158
2-159
2-160
2-161
2-162
2-163
2-164
2-165
2-166
-162
-163
-164
-165
-166
5 3/4
6
6 1/4
6 1/2
6 3/4
5 15/16
6 3/16
6 7/16
6 11/16
6 15/16
3/32
3/32
3/32
3/32
3/32
5.737
5.987
6.237
6.487
6.737
.035
.035
.040
.040
.040
.103
.103
.103
.103
.103
.003
.003
.003
.003
.003
.1529
.1594
.1660
.1725
.1790
145,72
152,07
158,42
164,77
171,12
0,89
0,89
1,02
1,02
1,02
2,62
2,62
2,62
2,62
2,62
0,08
0,08
0,08
0,08
0,08
2-162
2-163
2-164
2-165
2-166
2-167
2-168
2-169
2-170
2-171
-167
-168
-169
-170
-171
7
7 1/4
7 1/2
7 3/4
8
7 3/16
7 7/16
7 11/16
7 15/16
8 3/16
3/32
3/32
3/32
3/32
3/32
6.987
7.237
7.487
7.737
7.987
.040
.045
.045
.045
.045
.103
.103
.103
.103
.103
.003
.003
.003
.003
.003
.1856
.1921
.1987
.2052
.2118
177,47
183,82
190,17
196,52
202,87
1,02
1,14
1,14
1,14
1,14
2,62
2,62
2,62
2,62
2,62
0,08
0,08
0,08
0,08
0,08
2-167
2-168
2-169
2-170
2-171
(a) The rubber compound must be added when ordering by the 2-size number (i.e., 2-007 N0674-70).
(b) This chart provides dimensions for standard (AN) shrinkage materials ONLY. These correspond to AS568A dimensions.
O-rings manufactured out of compounds with different shrinkage rates (other than AN) will produce slightly different
dimensions and tolerances. For more information on shrinkage rates, see the Appendix.
(c) When ordering O-rings to a Military, AMS or NAS material Specification, see Section VIII, Specifications, for more
information.
Seals
Sizes
5700 Handbook
Parker
Size No.
(Size Only)
(a)
Size
Only
Nominal
Size
(Ref.
Only)
(Size Only)
(Inches)
AS 568A
Uniform
(Ref. Only)
Dash No.
I.D.
O.D.
Tolerance
W.
I.D.
Basic
Volume
W
Cu. In.
Parker
Size No.
(Size Only)
Tolerance
I.D.
(a)
2-172
2-173
2-174
2-175
2-176
-172
-173
-174
-175
-176
8 1/4
8 1/2
8 3/4
9
9 1/4
8 7/16
8 11/16
8 15/16
9 3/16
9 7/16
3/32
3/32
3/32
3/32
3/32
8.237
8.487
8.737
8.987
9.237
.050
.050
.050
.050
.055
.103
.103
.103
.103
.103
.003
.003
.003
.003
.003
.2183
.2249
.2314
.2379
.2445
209,22
215,57
221,92
228,27
234,62
1,27
1,27
1,27
1,27
1,40
2,62
2,62
2,62
2,62
2,62
0,08
0,08
0,08
0,08
0,08
2-172
2-173
2-174
2-175
2-176
2-177
2-178
2-201
2-202
2-203
-177
-178
-201
-202
-203
9 1/2
9 3/4
3/16
1/4
5/16
9 11/16
9 15/16
7/16
1/2
9/16
3/32
3/32
1/8
1/8
1/8
9.487
9.737
.171
.234
.296
.055
.055
.055
.005
.005
.103
.103
.139
.139
.139
.003
.003
.004
.004
.004
.2510
.2576
.0148
.0178
.0207
240,97
247,32
4,34
5,94
7,52
1,40
1,40
0,13
0,13
0,13
2,62
2,62
3,53
3,53
3,53
0,08
0,08
0,10
0,10
0,10
2-177
2-178
2-201
2-202
2-203
2-204
2-205
2-206
2-207
2-208
-204
-205
-206
-207
-208
3/8
7/16
1/2
9/16
5/8
5/8
11/16
3/4
13/16
7/8
1/8
1/8
1/8
1/8
1/8
.359
.421
.484
.546
.609
.005
.005
.005
.007
.009
.139
.139
.139
.139
.139
.004
.004
.004
.004
.004
.0237
.0267
.0297
.0327
.0357
9,12
10,69
12,29
13,87
15,47
0,13
0,13
0,13
0,18
0,23
3,53
3,53
3,53
3,53
3,53
0,10
0,10
0,10
0,10
0,10
2-204
2-205
2-206
2-207
2-208
2-209
2-210
2-211
2-212
2-213
2-214
2-215
2-216
2-217
2-218
2-219
2-220
2-221
2-222
2-223
2-224
2-225
2-226
2-227
2-228
-209
-210
-211
-212
-213
-214
-215
-216
-217
-218
-219
-220
-221
-222
-223
-224
-225
-226
-227
-228
11/16
3/4
13/16
7/8
15/16
1
1 1/16
1 1/8
1 3/16
1 1/4
1 5/16
1 3/8
1 7/16
1 1/2
1 5/8
1 3/4
1 7/8
2
2 1/16
2 1/4
15/16
1
1 1/16
1 1/8
1 3/16
1 1/4
1 5/16
1 3/8
1 7/16
1 1/2
1 9/16
1 5/8
1 11/16
1 3/4
1 7/8
2
2 1/8
2 1/4
2 3/8
2 1/2
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
.671
.734
.796
.859
.921
.984
1.046
1.109
1.171
1.234
1.296
1.359
1.421
1.484
1.609
1.734
1.859
1.984
2.109
2.234
.010
.010
.010
.010
.010
.010
.010
.012
.012
.012
.012
.012
.012
.015
.015
.015
.018
.018
.018
.020
.139
.139
.139
.139
.139
.139
.139
.139
.139
.139
.139
.139
.139
.139
.139
.139
.139
.139
.139
.139
.004
.004
.004
.004
.004
.004
.004
.004
.004
.004
.004
.004
.004
.004
.004
.004
.004
.004
.004
.004
.0386
.0416
.0446
.0476
.0505
.0535
.0565
.0595
.0624
.0654
.0684
.0714
.0744
.0774
.0833
.0893
.0952
.1012
.1072
.1131
17,04
18,64
20,22
21,82
23,39
24,99
26,57
28,17
29,74
31,34
32,92
34,52
36,09
37,69
40,87
44,04
47,22
50,39
53,57
56,74
0,23
0,25
0,25
0,25
0,25
0,25
0,25
0,30
0,30
0,30
0,30
0,30
0,30
0,38
0,38
0,38
0,46
0,46
0,46
0,51
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
0,10
0,10
0,10
0,10
0,10
0,10
0,10
0,10
0,10
0,10
0,10
0,10
0,10
0,10
0,10
0,10
0,10
0,10
0,10
0,10
2-209
2-210
2-211
2-212
2-213
2-214
2-215
2-216
2-217
2-218
2-219
2-220
2-221
2-222
2-223
2-224
2-225
2-226
2-227
2-228
2-229
2-230
2-231
2-232
2-233
-229
-230
-231
-232
-233
2 3/8
2 1/2
2 5/8
2 3/4
2 7/8
2 5/8
2 3/4
2 7/8
3
3 1/8
1/8
1/8
1/8
1/8
1/8
2.359
2.484
2.609
2.734
2.859
.020
.020
.020
.024
.024
.139
.139
.139
.139
.139
.004
.004
.004
.004
.004
.1191
.1250
.1310
.1370
.1429
59,92
63,09
66,27
69,44
72,62
0,51
0,51
0,51
0,61
0,61
3,53
3,53
3,53
3,53
3,53
0,10
0,10
0,10
0,10
0,10
2-229
2-230
2-231
2-232
2-233
(a) The rubber compound must be added when ordering by the 2-size number (i.e., 2-007 N0674-70).
(b) This chart provides dimensions for standard (AN) shrinkage materials ONLY. These correspond to AS568A dimensions.
O-rings manufactured out of compounds with different shrinkage rates (other than AN) will produce slightly different
dimensions and tolerances. For more information on shrinkage rates, see the Appendix.
(c) When ordering O-rings to a Military, AMS or NAS material Specification, see Section VIII, Specifications, for more
information.
Seals
Sizes
5700 Handbook
Parker
Size No.
(Size Only)
(a)
Size
Only
Nominal
Size
(Ref.
Only)
(Size Only)
(Inches)
AS 568A
Uniform
(Ref. Only)
Dash No.
I.D.
Tolerance
O.D.
W.
I.D.
Basic
Volume
W
Cu. In.
Parker
Size No.
(Size Only)
Tolerance
I.D.
(a)
2-234
2-235
2-236
2-237
2-238
-234
-235
-236
-237
-238
3
3 1/8
3 1/4
3 3/8
3 1/2
3 1/4
3 3/8
3 1/2
3 5/8
3 3/4
1/8
1/8
1/8
1/8
1/8
2.984
3.109
3.234
3.359
3.484
.024
.024
.024
.024
.024
.139
.139
.139
.139
.139
.004
.004
.004
.004
.004
.1489
.1548
.1608
.1668
.1727
75,79
78,97
82,14
85,32
88,49
0,61
0,61
0,61
0,61
0,61
3,53
3,53
3,53
3,53
3,53
0,10
0,10
0,10
0,10
0,10
2-234
2-235
2-236
2-237
2-238
2-239
2-240
2-241
2-242
2-243
2-244
2-245
2-246
2-247
2-248
2-249
2-250
2-251
2-252
2-253
2-254
2-255
2-256
2-257
2-258
-239
-240
-241
-242
-243
-244
-245
-246
-247
-248
-249
-250
-251
-252
-253
-254
-255
-256
-257
-258
3 5/8
3 3/4
3 7/8
4
4 1/8
4 1/4
4 3/8
4 1/2
4 5/8
4 3/4
4 7/8
5
5 1/8
5 1/4
5 3/8
5 1/2
5 5/8
5 3/4
5 7/8
6
3 7/8
4
4 1/8
4 1/4
4 3/8
4 1/2
4 5/8
4 3/4
4 7/8
5
5 1/8
5 1/4
5 3/8
5 1/2
5 5/8
5 3/4
5 7/8
6
6 1/8
6 1/4
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
3.609
3.734
3.859
3.984
4.109
4.234
4.359
4.484
4.609
4.734
4.859
4.984
5.109
5.234
5.359
5.484
5.609
5.734
5.859
5.984
.028
.028
.028
.028
.028
.030
.030
.030
.030
.030
.035
.035
.035
.035
.035
.035
.035
.035
.035
.035
.139
.139
.139
.139
.139
.139
.139
.139
.139
.139
.139
.139
.139
.139
.139
.139
.139
.139
.139
.139
.004
.004
.004
.004
.004
.004
.004
.004
.004
.004
.004
.004
.004
.004
.004
.004
.004
.004
.004
.004
.1787
.1846
.1906
.1966
.2025
.2085
.2144
.2204
.2264
.2323
.2383
.2442
.2502
.2561
.2621
.2681
.2740
.2800
.2859
.2919
91,67
94,84
98,02
101,19
104,37
107,54
110,72
113,89
117,07
120,24
123,42
126,59
129,77
132,94
136,12
139,29
142,47
145,64
148,82
151,99
0,71
0,71
0,71
0,71
0,71
0,76
0,76
0,76
0,76
0,76
0,89
0,89
0,89
0,89
0,89
0,89
0,89
0,89
0,89
0,89
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
0,10
0,10
0,10
0,10
0,10
0,10
0,10
0,10
0,10
0,10
0,10
0,10
0,10
0,10
0,10
0,10
0,10
0,10
0,10
0,10
2-239
2-240
2-241
2-242
2-243
2-244
2-245
2-246
2-247
2-248
2-249
2-250
2-251
2-252
2-253
2-254
2-255
2-256
2-257
2-258
2-259
2-260
2-261
2-262
2-263
-259
-260
-261
-262
-263
6 1/4
6 1/2
6 3/4
7
7 1/4
6 1/2
6 3/4
7
7 1/4
7 1/2
1/8
1/8
1/8
1/8
1/8
6.234
6.484
6.734
6.984
7.234
.040
.040
.040
.040
.045
.139
.139
.139
.139
.139
.004
.004
.004
.004
.004
.3038
.3157
.3277
.3396
.3515
158,34
164,69
171,04
177,39
183,74
1,02
1,02
1,02
1,02
1,14
3,53
3,53
3,53
3,53
3,53
0,10
0,10
0,10
0,10
0,10
2-259
2-260
2-261
2-262
2-263
2-264
2-265
2-266
2-267
2-268
-264
-265
-266
-267
-268
7 1/2
7 3/4
8
8 1/4
8 1/2
7 3/4
8
8 1/4
8 1/2
8 3/4
1/8
1/8
1/8
1/8
1/8
7.484
7.734
7.984
8.234
8.484
.045
.045
.045
.050
.050
.139
.139
.139
.139
.139
.004
.004
.004
.004
.004
.3634
.3753
.3872
.3992
.4111
190,09
196,44
202,79
209,14
215,49
1,14
1,14
1,14
1,27
1,27
3,53
3,53
3,53
3,53
3,53
0,10
0,10
0,10
0,10
0,10
2-264
2-265
2-266
2-267
2-268
2-269
2-270
2-271
2-272
2-273
-269
-270
-271
-272
-273
8 3/4
9
9 1/4
9 1/2
9 3/4
9
9 1/4
9 1/2
9 3/4
10
1/8
1/8
1/8
1/8
1/8
8.734
8.984
9.234
9.484
9.734
.050
.050
.055
.055
.055
.139
.139
.139
.139
.139
.004
.004
.004
.004
.004
.4230
.4349
.4468
.4588
.4707
221,84
228,19
234,54
240,89
247,24
1,27
1,27
1,40
1,40
1,40
3,53
3,53
3,53
3,53
3,53
0,10
0,10
0,10
0,10
0,10
2-269
2-270
2-271
2-272
2-273
(a) The rubber compound must be added when ordering by the 2-size number (i.e., 2-007 N0674-70).
(b) This chart provides dimensions for standard (AN) shrinkage materials ONLY. These correspond to AS568A dimensions.
O-rings manufactured out of compounds with different shrinkage rates (other than AN) will produce slightly different
dimensions and tolerances. For more information on shrinkage rates, see the Appendix.
(c) When ordering O-rings to a Military, AMS or NAS material Specification, see Section VIII, Specifications, for more
information.
Seals
Sizes
5700 Handbook
Parker
Size No.
(Size Only)
(a)
Size
Only
Nominal
Size
(Ref.
Only)
(Size Only)
(Inches)
AS 568A
Uniform
(Ref. Only)
Dash No.
I.D.
O.D.
Tolerance
W.
I.D.
Basic
Volume
W
Cu. In.
Parker
Size No.
(Size Only)
Tolerance
I.D.
(a)
2-274
2-275
2-276
2-277
2-278
-274
-275
-276
-277
-278
10
10 1/2
11
11 1/2
12
10 1/4
10 3/4
11 1/4
11 3/4
12 1/4
1/8
1/8
1/8
1/8
1/8
9.984
10.484
10.984
11.484
11.984
.055
.055
.065
.065
.065
.139
.139
.139
.139
.139
.004
.004
.004
.004
.004
.4826
.5064
.5303
.5541
.5779
253,59
266,29
278,99
291,69
304,39
1,40
1,40
1,65
1,65
1,65
3,53
3,53
3,53
3,53
3,53
0,10
0,10
0,10
0,10
0,10
2-274
2-275
2-276
2-277
2-278
2-279
2-280
2-281
2-282
2-283
2-284
2-309
2-310
2-311
2-312
2-313
2-314
2-315
2-316
2-317
2-318
2-319
2-320
2-321
2-322
-279
-280
-281
-282
-283
-284
-309
-310
-311
-312
-313
-314
-315
-316
-317
-318
-319
-320
-321
-322
13
14
15
16
17
18
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1
1 1/16
1 1/8
1 3/16
1 1/4
13 1/4
14 1/4
15 1/4
16 1/4
17 1/4
18 1/4
13/16
7/8
15/16
1
1 1/16
1 1/8
1 3/16
1 1/4
1 5/16
1 3/8
1 7/16
1 1/2
1 9/16
1 5/8
1/8
1/8
1/8
1/8
1/8
1/8
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
12.984
13.984
14.984
15.955
16.955
17.955
.412
.475
.537
.600
.662
.725
.787
.850
.912
.975
1.037
1.100
1.162
1.225
.065
.065
.065
.075
.080
.085
.005
.005
.007
.009
.009
.010
.010
.010
.010
.010
.010
.012
.012
.012
.139
.139
.139
.139
.139
.139
.210
.210
.210
.210
.210
.210
.210
.210
.210
.210
.210
.210
.210
.210
.004
.004
.004
.004
.004
.004
.005
.005
.005
.005
.005
.005
.005
.005
.005
.005
.005
.005
.005
.005
.6256
.6733
.7210
.7672
.8149
.8626
.0677
.0745
.0813
.0881
.0949
.1017
.1085
.1153
.1221
.1289
.1357
.1425
.1493
.1561
329,79
355,19
380,59
405,26
430,66
456,06
10,46
12,07
13,64
15,24
16,81
18,42
19,99
21,59
23,16
24,77
26,34
27,94
29,51
31,12
1,65
1,65
1,65
1,91
2,03
2,16
0,13
0,13
0,18
0,23
0,23
0,25
0,25
0,25
0,25
0,25
0,25
0,30
0,30
0,30
3,53
3,53
3,53
3,53
3,53
3,53
5,33
5,33
5,33
5,33
5,33
5,33
5,33
5,33
5,33
5,33
5,33
5,33
5,33
5,33
0,10
0,10
0,10
0,10
0,10
0,10
0,13
0,13
0,13
0,13
0,13
0,13
0,13
0,13
0,13
0,13
0,13
0,13
0,13
0,13
2-279
2-280
2-281
2-282
2-283
2-284
2-309
2-310
2-311
2-312
2-313
2-314
2-315
2-316
2-317
2-318
2-319
2-320
2-321
2-322
2-323
2-324
2-325
2-326
2-327
-323
-324
-325
-326
-327
1 5/16
1 3/8
1 1/2
1 5/8
1 3/4
1 11/16
1 3/4
1 7/8
2
2 1/8
3/16
3/16
3/16
3/16
3/16
1.287
1.350
1.475
1.600
1.725
.012
.012
.015
.015
.015
.210
.210
.210
.210
.210
.005
.005
.005
.005
.005
.1629
.1697
.1833
.1970
.2106
32,69
34,29
37,47
40,64
43,82
0,30
0,30
0,38
0,38
0,38
5,33
5,33
5,33
5,33
5,33
0,13
0,13
0,13
0,13
0,13
2-323
2-324
2-325
2-326
2-327
2-328
2-329
2-330
2-331
2-332
-328
-329
-330
-331
-332
1 7/8
2
2 1/8
2 1/4
2 3/8
2 1/4
2 3/8
2 1/2
2 5/8
2 3/4
3/16
3/16
3/16
3/16
3/16
1.850
1.975
2.100
2.225
2.350
.015
.018
.018
.018
.018
.210
.210
.210
.210
.210
.005
.005
.005
.005
.005
.2242
.2378
.2514
.2650
.2786
46,99
50,17
53,34
56,52
59,69
0,38
0,46
0,46
0,46
0,46
5,33
5,33
5,33
5,33
5,33
0,13
0,13
0,13
0,13
0,13
2-328
2-329
2-330
2-331
2-332
2-333
2-334
2-335
2-336
2-337
-333
-334
-335
-336
-337
2 1/2
2 5/8
2 3/4
2 7/8
3
2 7/8
3
3 1/8
3 1/4
3 3/8
3/16
3/16
3/16
3/16
3/16
2.475
2.600
2.725
2.850
2.975
.020
.020
.020
.020
.024
.210
.210
.210
.210
.210
.005
.005
.005
.005
.005
.2922
.3058
.3194
.3330
.3466
62,87
66,04
69,22
72,39
75,57
0,51
0,51
0,51
0,51
0,61
5,33
5,33
5,33
5,33
5,33
0,13
0,13
0,13
0,13
0,13
2-333
2-334
2-335
2-336
2-337
(a) The rubber compound must be added when ordering by the 2-size number (i.e., 2-007 N0674-70).
(b) This chart provides dimensions for standard (AN) shrinkage materials ONLY. These correspond to AS568A dimensions.
O-rings manufactured out of compounds with different shrinkage rates (other than AN) will produce slightly different
dimensions and tolerances. For more information on shrinkage rates, see the Appendix.
(c) When ordering O-rings to a Military, AMS or NAS material Specification, see Section VIII, Specifications, for more
information.
Seals
Sizes
5700 Handbook
Parker
Size No.
(Size Only)
(a)
Size
Only
Nominal
Size
(Ref.
Only)
(Size Only)
(Inches)
AS 568A
Uniform
(Ref. Only)
Dash No.
I.D.
O.D.
Tolerance
W.
I.D.
Basic
Volume
W
Cu. In.
Parker
Size No.
(Size Only)
Tolerance
I.D.
(a)
2-338
2-339
2-340
2-341
2-342
-338
-339
-340
-341
-342
3 1/8
3 1/4
3 3/8
3 1/2
3 5/8
3 1/2
3 5/8
3 3/4
3 7/8
4
3/16
3/16
3/16
3/16
3/16
3.100
3.225
3.350
3.475
3.600
.024
.024
.024
.024
.028
.210
.210
.210
.210
.210
.005
.005
.005
.005
.005
.3602
.3738
.3874
.4010
.4146
78,74
81,92
85,09
88,27
91,44
0,61
0,61
0,61
0,61
0,71
5,33
5,33
5,33
5,33
5,33
0,13
0,13
0,13
0,13
0,13
2-338
2-339
2-340
2-341
2-342
2-343
2-344
2-345
2-346
2-347
2-348
2-349
2-350
2-351
2-352
2-353
2-354
2-355
2-356
2-357
2-358
2-359
2-360
2-361
2-362
-343
-344
-345
-346
-347
-348
-349
-350
-351
-352
-353
-354
-355
-356
-357
-358
-359
-360
-361
-362
3 3/4
3 7/8
4
4 1/8
4 1/4
4 3/8
4 1/2
4 5/8
4 3/4
4 7/8
5
5 1/8
5 1/4
5 3/8
5 1/2
5 5/8
5 3/4
5 7/8
6
6 1/4
4 1/8
4 1/4
4 3/8
4 1/2
4 5/8
4 3/4
4 7/8
5
5 1/8
5 1/4
5 3/8
5 1/2
5 5/8
5 3/4
5 7/8
6
6 1/8
6 1/4
6 3/8
6 5/8
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3.725
3.850
3.975
4.100
4.225
4.350
4.475
4.600
4.725
4.850
4.975
5.100
5.225
5.350
5.475
5.600
5.725
5.850
5.975
6.225
.028
.028
.028
.028
.030
.030
.030
.030
.030
.030
.037
.037
.037
.037
.037
.037
.037
.037
.037
.040
.210
.210
.210
.210
.210
.210
.210
.210
.210
.210
.210
.210
.210
.210
.210
.210
.210
.210
.210
.210
.005
.005
.005
.005
.005
.005
.005
.005
.005
.005
.005
.005
.005
.005
.005
.005
.005
.005
.005
.005
.4282
.4418
.4554
.4690
.4826
.4962
.5098
.5234
.5370
.5506
.5642
.5778
.5914
.6050
.6186
.6322
.6458
.6594
.6730
.7002
94,62
97,79
100,97
104,14
107,32
110,49
113,67
116,84
120,02
123,19
126,37
129,54
132,72
135,89
139,07
142,24
145,42
148,59
151,77
158,12
0,71
0,71
0,71
0,71
0,76
0,76
0,76
0,76
0,76
0,76
0,94
0,94
0,94
0,94
0,94
0,94
0,94
0,94
0,94
1,02
5,33
5,33
5,33
5,33
5,33
5,33
5,33
5,33
5,33
5,33
5,33
5,33
5,33
5,33
5,33
5,33
5,33
5,33
5,33
5,33
0,13
0,13
0,13
0,13
0,13
0,13
0,13
0,13
0,13
0,13
0,13
0,13
0,13
0,13
0,13
0,13
0,13
0,13
0,13
0,13
2-343
2-344
2-345
2-346
2-347
2-348
2-349
2-350
2-351
2-352
2-353
2-354
2-355
2-356
2-357
2-358
2-359
2-360
2-361
2-362
2-363
2-364
2-365
2-366
2-367
-363
-364
-365
-366
-367
6 1/2
6 3/4
7
7 1/4
7 1/2
6 7/8
7 1/8
7 3/8
7 5/8
7 7/8
3/16
3/16
3/16
3/16
3/16
6.475
6.725
6.975
7.225
7.475
.040
.040
.040
.045
.045
.210
.210
.210
.210
.210
.005
.005
.005
.005
.005
.7274
.7546
.7818
.8090
.8362
164,47
170,82
177,17
183,52
189,87
1,02
1,02
1,02
1,14
1,14
5,33
5,33
5,33
5,33
5,33
0,13
0,13
0,13
0,13
0,13
2-363
2-364
2-365
2-366
2-367
2-368
2-369
2-370
2-371
2-372
-368
-369
-370
-371
-372
7 3/4
8
8 1/4
8 1/2
8 3/4
8 1/8
8 3/8
8 5/8
8 7/8
9 1/8
3/16
3/16
3/16
3/16
3/16
7.725
7.975
8.225
8.475
8.725
.045
.045
.050
.050
.050
.210
.210
.210
.210
.210
.005
.005
.005
.005
.005
.8634
.8906
.9178
.9450
.9722
196,22
202,57
208,92
215,27
221,62
1,14
1,14
1,27
1,27
1,27
5,33
5,33
5,33
5,33
5,33
0,13
0,13
0,13
0,13
0,13
2-368
2-369
2-370
2-371
2-372
2-373
2-374
2-375
2-376
2-377
-373
-374
-375
-376
-377
9
9 1/4
9 1/2
9 3/4
10
9 3/8
9 5/8
9 7/8
10 1/8
10 3/8
3/16
3/16
3/16
3/16
3/16
8.975
9.225
9.475
9.725
9.975
.050
.055
.055
.055
.055
.210
.210
.210
.210
.210
.005
.005
.005
.005
.005
.9994
1.0266
1.0538
1.0810
1.1083
227,97
234,32
240,67
247,02
253,37
1,27
1,40
1,40
1,40
1,40
5,33
5,33
5,33
5,33
5,33
0,13
0,13
0,13
0,13
0,13
2-373
2-374
2-375
2-376
2-377
(a) The rubber compound must be added when ordering by the 2-size number (i.e., 2-007 N0674-70).
(b) This chart provides dimensions for standard (AN) shrinkage materials ONLY. These correspond to AS568A dimensions.
O-rings manufactured out of compounds with different shrinkage rates (other than AN) will produce slightly different
dimensions and tolerances. For more information on shrinkage rates, see the Appendix.
(c) When ordering O-rings to a Military, AMS or NAS material Specification, see Section VIII, Specifications, for more
information.
Seals
Sizes
5700 Handbook
Parker
Size No.
(Size Only)
(a)
Size
Only
Nominal
Size
(Ref.
Only)
(Size Only)
(Inches)
AS 568A
Uniform
(Ref. Only)
Dash No.
Tolerance
I.D.
O.D.
W.
I.D.
Basic
Volume
Parker
Size No.
(Size Only)
Tolerance
Cu. In.
I.D.
(a)
2-378
2-379
2-380
2-381
2-382
-378
-379
-380
-381
-382
10 1/2
11
11 1/2
12
13
10 7/8
11 3/8
11 7/8
12 3/8
13 3/8
3/16
3/16
3/16
3/16
3/16
10.475
10.975
11.475
11.975
12.975
.060
.060
.065
.065
.065
.210
.210
.210
.210
.210
.005
.005
.005
.005
.005
1.1627
1.2171
1.2715
1.3259
1.4347
266,07
278,77
291,47
304,17
329,57
1,52
1,52
1,65
1,65
1,65
5,33
5,33
5,33
5,33
5,33
0,13
0,13
0,13
0,13
0,13
2-378
2-379
2-380
2-381
2-382
2-383
2-384
2-385
2-386
2-387
2-388
2-389
2-390
2-391
2-392
2-393
2-394
2-395
2-425
2-426
2-427
2-428
2-429
2-430
2-431
-383
-384
-385
-386
-387
-388
-389
-390
-391
-392
-393
-394
-395
-425
-426
-427
-428
-429
-430
-431
14
15
16
17
18
19
20
21
22
23
24
25
26
4 1/2
4 5/8
4 3/4
4 7/8
5
5 1/8
5 1/4
14 3/8
15 3/8
16 3/8
17 3/8
18 3/8
19 3/8
20 3/8
21 3/8
22 3/8
23 3/8
24 3/8
25 3/8
26 3/8
5
5 1/8
5 1/4
5 3/8
5 1/2
5 5/8
5 3/4
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
1/4
1/4
1/4
1/4
1/4
1/4
1/4
13.975
14.975
15.955
16.955
17.955
18.955
19.955
20.955
21.955
22.940
23.940
24.940
25.940
4.475
4.600
4.725
4.850
4.975
5.100
5.225
.070
.070
.075
.080
.085
.090
.095
.095
.100
.105
.110
.115
.120
.033
.033
.033
.033
.037
.037
.037
.210
.210
.210
.210
.210
.210
.210
.210
.210
.210
.210
.210
.210
.275
.275
.275
.275
.275
.275
.275
.005
.005
.005
.005
.005
.005
.005
.005
.005
.005
.005
.005
.005
.006
.006
.006
.006
.006
.006
.006
1.5435
1.6523
1.7590
1.8678
1.9766
2.0854
2.1942
2.3030
2.4118
2.5190
2.6278
2.7366
2.8454
.8863
.9097
.9330
.9563
.9796
1.0030
1.0263
354,97
380,37
405,26
430,66
456,06
481,41
506,81
532,21
557,61
582,68
608,08
633,48
658,88
113,67
116,84
120,02
123,19
126,37
129,54
132,72
1,78
1,78
1,91
2,03
2,16
2,29
2,41
2,41
2,54
2,67
2,79
2,92
3,05
0,84
0,84
0,84
0,84
0,94
0,94
0,94
5,33
5,33
5,33
5,33
5,33
5,33
5,33
5,33
5,33
5,33
5,33
5,33
5,33
6,99
6,99
6,99
6,99
6,99
6,99
6,99
0,13
0,13
0,13
0,13
0,13
0,13
0,13
0,13
0,13
0,13
0,13
0,13
0,13
0,15
0,15
0,15
0,15
0,15
0,15
0,15
2-383
2-384
2-385
2-386
2-387
2-388
2-389
2-390
2-391
2-392
2-393
2-394
2-395
2-425
2-426
2-427
2-428
2-429
2-430
2-431
2-432
2-433
2-434
2-435
2-436
-432
-433
-434
-435
-436
5 3/8
5 1/2
5 5/8
5 3/4
5 7/8
5 7/8
6
6 1/8
6 1/4
6 3/8
1/4
1/4
1/4
1/4
1/4
5.350
5.475
5.600
5.725
5.850
.037
.037
.037
.037
.037
.275
.275
.275
.275
.275
.006
.006
.006
.006
.006
1.0496
1.0729
1.0963
1.1196
1.1429
135,89
139,07
142,24
145,42
148,59
0,94
0,94
0,94
0,94
0,94
6,99
6,99
6,99
6,99
6,99
0,15
0,15
0,15
0,15
0,15
2-432
2-433
2-434
2-435
2-436
2-437
2-438
2-439
2-440
2-441
-437
-438
-439
-440
-441
6
6 1/4
6 1/2
6 3/4
7
6 1/2
6 3/4
7
7 1/4
7 1/2
1/4
1/4
1/4
1/4
1/4
5.975
6.225
6.475
6.725
6.975
.037
.040
.040
.040
.040
.275
.275
.275
.275
.275
.006
.006
.006
.006
.006
1.1662
1.2129
1.2595
1.3062
1.3528
151,77
158,12
164,47
170,82
177,17
0,94
1,02
1,02
1,02
1,02
6,99
6,99
6,99
6,99
6,99
0,15
0,15
0,15
0,15
0,15
2-437
2-438
2-439
2-440
2-441
2-442
2-443
2-444
2-445
2-446
-442
-443
-444
-445
-446
7 1/4
7 1/2
7 3/4
8
8 1/2
7 3/4
8
8 1/4
8 1/2
9
1/4
1/4
1/4
1/4
1/4
7.225
7.475
7.725
7.975
8.475
.045
.045
.045
.045
.055
.275
.275
.275
.275
.275
.006
.006
.006
.006
.006
1.3995
1.4461
1.4928
1.5394
1.6327
183,52
189,87
196,22
202,57
215,27
1,14
1,14
1,14
1,14
1,40
6,99
6,99
6,99
6,99
6,99
0,15
0,15
0,15
0,15
0,15
2-442
2-443
2-444
2-445
2-446
(a) The rubber compound must be added when ordering by the 2-size number (i.e., 2-007 N0674-70).
(b) This chart provides dimensions for standard (AN) shrinkage materials ONLY. These correspond to AS568A dimensions.
O-rings manufactured out of compounds with different shrinkage rates (other than AN) will produce slightly different
dimensions and tolerances. For more information on shrinkage rates, see the Appendix.
(c) When ordering O-rings to a Military, AMS or NAS material Specification, see Section VIII, Specifications, for more
information.
Seals
Sizes
5700 Handbook
Parker
Size No.
(Size Only)
(a)
Size
Only
Nominal
Size
(Ref.
Only)
(Size Only)
(Inches)
AS 568A
Uniform
(Ref. Only)
Dash No.
I.D.
O.D.
Tolerance
W.
I.D.
Basic
Volume
Parker
Size No.
(Size Only)
Tolerance
Cu. In.
I.D.
(a)
2-447
2-448
2-449
2-450
2-451
-447
-448
-449
-450
-451
9
9 1/2
10
10 1/2
11
9 1/2
10
10 1/2
11
11 1/2
1/4
1/4
1/4
1/4
1/4
8.975
9.475
9.975
10.475
10.975
.055
.055
.055
.060
.060
.275
.275
.275
.275
.275
.006
.006
.006
.006
.006
1.7260
1.8193
1.9126
2.0059
2.0992
227,97
240,67
253,37
266,07
278,77
1,40
1,40
1,40
1,52
1,52
6,99
6,99
6,99
6,99
6,99
0,15
0,15
0,15
0,15
0,15
2-447
2-448
2-449
2-450
2-451
2-452
2-453
2-454
2-455
2-456
2-457
2-458
2-459
2-460
2-461
2-462
2-463
2-464
2-465
2-466
2-467
2-468
2-469
2-470
2-471
-452
-453
-454
-455
-456
-457
-458
-459
-460
-461
-462
-463
-464
-465
-466
-467
-468
-469
-470
-471
11 1/2
12
12 1/2
13
13 1/2
14
14 1/2
15
15 1/2
16
16 1/2
17
17 1/2
18
18 1/2
19
19 1/2
20
21
22
12
12 1/2
13
13 1/2
14
14 1/2
15
15 1/2
16
16 1/2
17
17 1/2
18
18 1/2
19
19 1/2
20
20 1/2
21 1/2
22 1/2
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
11.475
11.975
12.475
12.975
13.475
13.975
14.475
14.975
15.475
15.955
16.455
16.955
17.455
17.955
18.455
18.955
19.455
19.955
20.955
21.955
.060
.060
.060
.060
.070
.070
.070
.070
.070
.075
.075
.080
.085
.085
.085
.090
.090
.095
.095
.100
.275
.275
.275
.275
.275
.275
.275
.275
.275
.275
.275
.275
.275
.275
.275
.275
.275
.275
.275
.275
.006
.006
.006
.006
.006
.006
.006
.006
.006
.006
.006
.006
.006
.006
.006
.006
.006
.006
.006
.006
2.1925
2.2858
2.3791
2.4724
2.5657
2.6590
2.7523
2.8456
2.9389
3.0285
3.1218
3.2151
3.3084
3.4017
3.4950
3.5883
3.6816
3.7749
3.9615
4.1481
291,47
304,17
316,87
329,57
342,27
354,97
367,67
380,37
393,07
405,26
417,96
430,66
443,36
456,06
468,76
481,46
494,16
506,86
532,26
557,66
1,52
1,52
1,52
1,52
1,78
1,78
1,78
1,78
1,78
1,91
1,91
2,03
2,16
2,16
2,16
2,29
2,29
2,41
2,41
2,54
6,99
6,99
6,99
6,99
6,99
6,99
6,99
6,99
6,99
6,99
6,99
6,99
6,99
6,99
6,99
6,99
6,99
6,99
6,99
6,99
0,15
0,15
0,15
0,15
0,15
0,15
0,15
0,15
0,15
0,15
0,15
0,15
0,15
0,15
0,15
0,15
0,15
0,15
0,15
0,15
2-452
2-453
2-454
2-455
2-456
2-457
2-458
2-459
2-460
2-461
2-462
2-463
2-464
2-465
2-466
2-467
2-468
2-469
2-470
2-471
2-472
2-473
2-474
2-475
-472
-473
-474
-475
23
24
25
26
23 1/2
24 1/2
25 1/2
26 1/2
1/4
1/4
1/4
1/4
22.940
23.940
24.940
25.940
.105
.110
.115
.120
.275
.275
.275
.275
.006
.006
.006
.006
4.3319
4.5185
4.7051
4.8917
582,68
608,08
633,48
658,88
2,67
2,79
2,92
3,05
6,99
6,99
6,99
6,99
0,15
0,15
0,15
0,15
2-472
2-473
2-474
2-475
(a) The rubber compound must be added when ordering by the 2-size number (i.e., 2-007 N0674-70).
(b) This chart provides dimensions for standard (AN) shrinkage materials ONLY. These correspond to AS568A dimensions.
O-rings manufactured out of compounds with different shrinkage rates (other than AN) will produce slightly different
dimensions and tolerances. For more information on shrinkage rates, see the Appendix.
(c) When ordering O-rings to a Military, AMS or NAS material Specification, see Section VIII, Specifications, for more
information.
9-10
Seals
Sizes
5700 Handbook
Size No.
3-XXX (a)
AS568A
Dash
No.
3-901
3-902
3-903
3-904
3-905
3-906
3-907
3-908
3-909
3-910
3-911
3-912
3-913
3-914
3-916
3-918
3-920
3-924
3-928
3-932
-901
-902
-903
-904
-905
-906
-907
-908
-909
-910
-911
-912
-913
-914
-916
-918
-920
-924
-928
-932
Tube O.D.
(Ref.)
3/32
1/8
3/16
1/4
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
1
1 1/8
1 1/4
1 1/2
1 3/4
2
I.D.
.185
.239
.301
.351
.414
.468
.530
.644
.706
.755
.863
.924
.986
1.047
1.171
1.355
1.475
1.720
2.090
2.337
Tolerance
.005
.005
.005
.005
.005
.005
.007
.009
.009
.009
.009
.009
.010
.010
.010
.012
.014
.014
.018
.018
.056
.064
.064
.072
.072
.078
.082
.087
.097
.097
.116
.116
.116
.116
.116
.116
.118
.118
.118
.118
.003
.003
.003
.003
.003
.003
.003
.003
.003
.003
.004
.004
.004
.004
.004
.004
.004
.004
.004
.004
Basic
Volume
(cu. in.)
11
.0019
.0031
.0037
.0055
.0063
.0082
.0102
.0137
.0187
.0198
.0326
.0346
.0366
.0387
.0428
.0489
.0548
.0632
.0759
.0844
3-XXX (a)
I.D.
4,70
6,07
7,65
8,92
10,52
11,89
13,46
16,36
17,93
19,18
21,92
23,47
25,04
26,59
29,74
34,42
37,47
43,69
53,09
59,36
Tolerance
0,13
0,13
0,13
0,13
0,13
0,13
0,18
0,23
0,23
0,23
0,23
0,23
0,26
0,26
0,26
0,30
0,36
0,36
0,46
0,46
(a) The rubber compound must be added when ordering by the 3-size number (i.e.,3-910 N552-90).
(b) This chart provides dimensions for standard (AN) shrinkage materials ONLY. These correspond to
AS568A dimensions. O-rings manufactured out of compounds with different shrinkage rates (other than
AN) will produce slightly different dimensions and tolerances. For more information on shrinkage rates,
see the Appendix.
9-11
Seals
10
1,42
1,63
1,63
1,83
1,83
1,98
2,08
2,21
2,46
2,46
2,95
2,95
2,95
2,95
2,95
2,95
3,00
3,00
3,00
3,00
Size No.
0,08
0,08
0,08
0,08
0,08
0,08
0,08
0,08
0,08
0,08
0,10
0,10
0,10
0,10
0,10
0,10
0,10
0,10
0,10
0,10
3-901
3-902
3-903
3-904
3-905
3-906
3-907
3-908
3-909
3-910
3-911
3-912
3-913
3-914
3-916
3-918
3-920
3-924
3-928
3-932
Sizes
5700 Handbook
Std
5-Size
I.D.
Inches
Tol W
Tol
Metric
5-Size
I.D.
Millimeters
Tol W
Std
Tol 5-Size
I.D.
Inches
Tol W
Tol
Metric
5-Size
I.D.
Millimeters
Tol W
Tol
5-118
5-187
5-051
5-101
5-578
.059
.070
.070
.100
.102
.004
.005
.005
.005
.005
.040
.036
.040
.038
.074
.003
.003
.003
.003
.003
5-118
5-187
5-051
5-101
5-578
1.50
1.78
1.78
2.54
2.59
0.10
0.13
0.13
0.13
0.13
1.02
0.91
1.02
0.97
1.88
.08
.08
.08
.08
.08
5-205
5-160
5-712
5-585
5-664
.312
.312
.313
.314
.320
.005
.005
.005
.005
.005
.092
.103
.051
.074
.070
.003
.003
.003
.003
.003
5-205
5-160
5-712
5-585
5-664
7.92
7.92
7.95
7.98
8.13
0.13
0.13
0.13
0.13
0.13
2.34
2.62
1.30
1.88
1.78
.08
.08
.08
.08
.08
5-632
5-102
5-178
5-683
5-646
.110
.116
.120
.122
.126
.005
.005
.005
.005
.005
.040
.038
.040
.063
.040
.003
.003
.003
.003
.003
5-632
5-102
5-178
5-683
5-646
2.79
2.95
3.05
3.10
3.20
0.13
0.13
0.13
0.13
0.13
1.02
0.97
1.02
1.60
1.02
.08
.08
.08
.08
.08
5-1006
5-206
5-1007
5-133
5-612
.322
.326
.330
.332
.344
.005
.005
.005
.005
.005
.070
.103
.050
.031
.070
.003
.003
.003
.003
.003
5-1006
5-206
5-1007
5-133
5-612
8.18
8.28
8.38
8.43
8.74
0.13
0.13
0.13
0.13
0.13
1.78
2.62
1.27
0.79
1.78
.08
.08
.08
.08
.08
5-103
5-190
5-579
5-669
5-148
.128
.132
.133
.146
.154
.005
.005
.005
.005
.005
.050
.070
.074
.040
.038
.003
.003
.003
.003
.003
5-103
5-190
5-579
5-669
5-148
3.25
3.35
3.39
3.71
3.91
0.13
0.13
0.13
0.13
0.13
1.27
1.78
1.88
1.02
0.97
.08
.08
.08
.08
.08
5-586
5-587
5-018
5-699
5-700
.350
.350
.352
.353
.354
.005
.005
.005
.005
.005
.074
.106
.113
.094
.118
.003
.004
.004
.003
.004
5-586
5-587
5-018
5-699
5-700
8.89
8.89
8.94
8.97
8.99
0.13
0.13
0.13
0.13
0.13
1.88
2.69
2.87
2.39
3.00
.08
.10
.10
.08
.10
5-105
5-106
5-580
5-193
5-108
.154
.154
.165
.176
.176
.005
.005
.005
.005
.005
.050
.066
.074
.040
.050
.003
.003
.003
.003
.003
5-105
5-106
5-580
5-193
5-108
3.91
3.91
4.19
4.47
4.47
0.13
0.13
0.13
0.13
0.13
1.27
1.68
1.88
1.02
1.27
.08
.08
.08
.08
.08
5-716
5-057
5-209
5-211
5-212
.362
.364
.370
.375
.384
.005
.005
.005
.005
.005
.118
.045
.040
.187
.070
.004
.003
.003
.005
.003
5-716
5-057
5-209
5-211
5-212
9.19
9.25
9.40
9.53
9.75
0.13
0.13
0.13
0.13
0.13
3.00
1.14
1.02
4.75
1.78
.10
.08
.08
.13
.08
5-124
5-107
5-125
5-581
5-685
.176
.176
.180
.192
.208
.005
.005
.005
.005
.005
.056
.066
.040
.074
.094
.003
.003
.003
.003
.003
5-124
5-107
5-125
5-581
5-685
4.47
4.47
4.57
4.88
5.28
0.13
0.13
0.13
0.13
0.13
1.42
1.68
1.02
1.88
2.39
.08
.08
.08
.08
.08
5-614
5-718
5-134
5-588
5-002
.391
.395
.410
.413
.416
.005
.005
.005
.005
.005
.103
.040
.031
.106
.059
.003
.003
.003
.004
.003
5-614
5-718
5-134
5-588
5-002
9.93
10.03
10.41
10.49
10.57
0.13
0.13
0.13
0.13
0.13
2.62
1.02
0.79
2.69
1.50
.08
.08
.08
.10
.08
5-582
5-194
5-638
5-179
5-151
.224
.228
.233
.239
.239
.005
.005
.005
.005
.005
.074
.040
.076
.040
.051
.003
.003
.003
.003
.003
5-582
5-194
5-638
5-179
5-151
5.69
5.79
5.92
6.07
6.07
0.13
0.13
0.13
0.13
0.13
1.88
1.02
1.93
1.02
1.30
.08
.08
.08
.08
.08
5-215
5-218
5-682
5-058
5-613
.418
.425
.426
.426
.437
.005
.005
.005
.005
.005
.094
.025
.040
.050
.070
.003
.003
.003
.003
.003
5-215
5-218
5-682
5-058
5-613
10.62
10.80
10.82
10.82
11.10
0.13
0.13
0.13
0.13
0.13
2.39
0.64
1.02
1.27
1.78
.08
.08
.08
.08
.08
5-127
5-1002
5-197
5-180
5-686
.239
.239
.242
.248
.248
.005
.005
.005
.005
.005
.074
.174
.040
.048
.094
.003
.005
.003
.003
.003
5-127
5-1002
5-197
5-180
5-686
6.07
6.07
6.15
6.30
6.30
0.13
0.13
0.13
0.13
0.13
1.88
4.42
1.02
1.22
2.39
.08
.13
.08
.08
.08
5-1011
5-222
5-223
5-225
5-615
.447
.455
.458
.469
.469
.005
.005
.005
.006
.006
.103
.128
.053
.094
.103
.003
.004
.003
.003
.003
5-1011
5-222
5-223
5-225
5-615
11.35
11.56
11.63
11.91
11.91
0.13
0.13
0.13
0.15
0.15
2.62
3.25
1.35
2.39
2.62
.08
.10
.08
.08
.15
5-583
5-200
5-052
5-202
5-698
.251
.265
.270
.278
.283
.005
.005
.005
.005
.005
.074
.139
.070
.046
.040
.003
.004
.003
.003
.003
5-583
5-200
5-052
5-202
5-698
6.38
6.73
6.86
7.06
7.19
0.13
0.13
0.13
0.13
0.13
1.88
3.53
1.78
1.17
1.02
.08
.10
.08
.08
.08
5-725
5-652
5-726
5-566
5-230
.470
.473
.484
.489
.500
.006
.006
.006
.006
.006
.270
.071
.056
.055
.125
.006
.003
.003
.003
.004
5-725
5-652
5-726
5-566
5-230
11.94
12.01
12.29
12.42
12.70
0.15
0.15
0.15
0.15
0.15
6.86
1.80
1.42
1.40
3.18
.15
.08
.08
.08
.10
5-584
5-687
5-1004
5-152
5-056
.283
.287
.290
.301
.301
.005
.005
.005
.005
.005
.074
.094
.045
.025
.038
.003
.003
.003
.003
.003
5-584
5-687
5-1004
5-152
5-056
7.19
7.29
7.39
7.65
7.65
0.13
0.13
0.13
0.13
0.13
1.88
2.39
1.14
0.64
0.97
.08
.08
.08
.08
.08
5-231
5-675
5-616
5-1014
5-135
.501
.508
.516
.525
.526
.006
.006
.006
.007
.007
.062
.049
.103
.071
.031
.003
.003
.003
.003
.003
5-231
5-675
5-616
5-1014
5-135
12.73
12.90
13.11
13.34
13.36
0.15
0.15
0.15
0.18
0.18
1.57
1.24
2.62
1.80
0.79
.08
.08
.08
.08
.08
5-710
5-673
5-204
.301
.305
.312
.005 .054
.005 .074
.005 .036
.003
.003
.003
5-710
5-673
5-204
7.65
7.75
7.92
0.13
0.13
0.13
1.37
1.88
0.91
.08 5-590
.08 5-001
.08 5-162
.535
.547
.554
.007 .106
.007 .051
.007 .070
.004
.003
.003
5-590
5-001
5-162
13.59
13.89
14.07
0.18
0.18
0.18
2.69
1.30
1.78
.10
.08
.08
(a) The rubber compound must be added when ordering by the 5-size number (i.e., 5-007 N0674-70).
(b) This chart provides dimensions for standard (AN) shrinkage materials ONLY. These correspond to AS568A dimensions. O-rings manufactured
out of compounds with different shrinkage rates (other than AN) will produce slightly different dimensions and tolerances. For more information
on shrinkage rates, see the Appendix.
Table 9-3: Parker Series 5-XXX O-Rings Size Cross Reference Table
9-12
Seals
Sizes
5700 Handbook
I.D.
Inches
Tol W
Tol
Metric
5-Size
I.D.
Millimeters
Tol W
Std
Tol 5-Size
I.D.
Inches
Tol W
Tol
Metric
5-Size
I.D.
5-236
5-239
5-156
5-563
5-735
.562
.570
.575
.583
.583
.007
.007
.007
.007
.007
.062
.106
.060
.040
.103
.003
.004
.003
.003
.003
5-236
5-239
5-156
5-563
5-735
14.27
14.48
14.61
14.81
14.81
0.18
0.18
0.18
0.18
0.18
1.57
2.69
1.52
1.02
2.62
.08
.10
.08
.08
.08
5-736
5-591
5-609
5-242
5-021
.590
.594
.600
.600
.603
.007
.007
.007
.007
.007
.070
.106
.094
.105
.125
.003
.004
.003
.004
.004
5-736
5-591
5-609
5-242
5-021
14.99
15.09
15.24
15.24
15.32
0.18
0.18
0.18
0.18
0.18
1.78
2.69
2.39
2.67
3.18
5-243
5-676
5-247
5-248
5-617
.604
.610
.623
.625
.625
.007
.007
.007
.007
.007
.103
.058
.125
.050
.103
.003
.003
.004
.003
.003
5-243
5-676
5-247
5-248
5-617
15.34
15.49
15.82
15.88
15.88
0.18
0.18
0.18
0.18
0.18
5-250
5-251
5-005
5-136
5-643
.627
.631
.640
.643
.650
.007
.007
.007
.007
.007
.062
.062
.080
.031
.045
.003
.003
.003
.003
.003
5-250
5-251
5-005
5-136
5-643
15.93
16.03
16.26
16.33
16.51
5-252
5-254
5-743
5-592
5-745
.652
.660
.660
.665
.687
.007
.007
.007
.007
.007
.070
.064
.141
.106
.250
.003
.003
.004
.004
.006
5-252
5-254
5-743
5-592
5-745
5-256
5-1017
5-594
5-257
5-593
.707
.709
.720
.722
.724
.008
.008
.008
.008
.008
.103
.079
.141
.113
.106
.003
.003
.004
.004
.004
5-181
5-964
5-263
5-264
5-266
.725
.744
.750
.752
.766
.008
.008
.008
.008
.008
.040
.109
.061
.070
.080
5-137
5-595
5-006
5-751
5-003
.775
.779
.796
.820
.836
.008
.008
.008
.009
.009
5-596
5-708
5-753
5-049
5-273
.838
.850
.857
.871
.879
5-022
5-138
5-597
5-598
5-278
Millimeters
Tol W
5-004
5-763
5-600
5-140
5-601
1.070
1.080
1.094
1.112
1.153
.010
.010
.010
.010
.012
.065
.050
.141
.031
.141
.003
.003
.004
.003
.004
5-004
5-763
5-600
5-140
5-601
27.18
27.43
27.79
28.24
29.29
0.25
0.25
0.25
0.25
0.30
1.65
1.27
3.58
0.79
3.58
.08
.08
.10
.08
.10
.08
.10
.08
.10
.10
5-769
5-290
5-291
5-1028
5-602
1.176
1.180
1.186
1.190
1.212
.012
.012
.012
.012
.012
.183
.210
.070
.250
.141
.005
.005
.003
.006
.004
5-769
5-290
5-291
5-1028
5-602
29.87
29.97
30.12
30.23
30.78
0.30
0.30
0.30
0.30
0.30
4.65
5.33
1.78
6.35
3.58
.13
.13
.08
.15
.10
2.62
1.47
3.18
1.27
2.62
.08
.08
.10
.08
.08
5-294
5-295
5-141
5-296
5-297
1.213
1.225
1.226
1.229
1.230
.012
.012
.012
.012
.012
.149
.275
.031
.070
.197
.004
.006
.003
.003
.005
5-294
5-295
5-141
5-296
5-297
30.81
31.12
31.14
31.22
31.24
0.30
0.30
0.30
0.30
0.30
3.78
6.99
0.79
1.78
5.00
.10
.15
.08
.08
.13
0.18
0.18
0.18
0.18
0.18
1.57
1.57
2.03
0.79
1.14
.08
.08
.08
.08
.08
5-301
5-603
5-157
5-604
5-605
1.259
1.279
1.338
1.342
1.401
.012
.012
.012
.012
.014
.092
.141
.092
.141
.141
.003
.004
.003
.004
.004
5-301
5-603
5-157
5-604
5-605
31.98
32.49
33.99
34.09
35.59
0.30
0.30
0.30
0.30
0.36
2.34
3.58
2.34
3.58
3.58
.08
.10
.08
.10
.10
16.56
16.76
16.76
16.89
17.45
0.18
0.18
0.18
0.18
0.18
1.78
1.63
3.58
2.69
6.35
.08
.08
.10
.10
.15
5-780
5-008
5-309
5-670
5-142
1.412
1.421
1.436
1.437
1.450
.014
.014
.014
.014
.014
.073
.080
.063
.070
.047
.003
.003
.003
.003
.003
5-780
5-008
5-309
5-670
5-142
35.86
36.09
36.47
36.40
36.83
0.36
0.36
0.36
0.36
0.36
1.85
2.03
1.60
1.78
1.19
.08
.08
.08
.08
.08
5-256
5-1017
5-594
5-257
5-593
17.96
18.01
18.29
18.34
18.39
0.20
0.20
0.20
0.20
0.20
2.62
2.01
3.58
2.87
2.69
.08
.08
.10
.10
.10
5-312
5-657
5-606
5-980
5-024
1.454
1.465
1.468
1.475
1.515
.014
.014
.014
.014
.015
.105
.103
.141
.275
.125
.004
.003
.004
.006
.004
5-312
5-657
5-606
5-980
5-024
36.93
37.21
37.29
37.47
38.48
0.36
0.36
0.36
0.36
0.38
2.67
2.62
3.58
6.99
3.18
.10
.08
.10
.15
.10
.003
.004
.003
.003
.003
5-181
5-964
5-263
5-264
5-266
18.42
18.90
19.05
19.10
19.46
0.20
0.20
0.20
0.20
0.20
1.02
2.77
1.55
1.78
2.03
.08
.10
.08
.08
.08
5-320
5-158
5-009
5-321
5-788
1.540
1.550
1.553
1.559
1.591
.015
.015
.015
.015
.015
.070
.092
.080
.139
.071
.003
.003
.003
.004
.003
5-320
5-158
5-009
5-321
5-788
39.12
39.37
39.45
39.60
40.41
0.38
0.38
0.38
0.38
0.38
1.78
2.34
2.03
3.53
1.80
.08
.08
.08
.10
.08
.031
.141
.080
.150
.059
.003
.004
.003
.005
.003
5-137
5-595
5-006
5-751
5-003
19.69
19.79
20.22
20.83
21.23
0.20
0.20
0.20
0.23
0.23
0.79
3.58
2.03
3.81
1.50
.08
.10
.08
.13
.08
5-034
5-327
5-143
5-329
5-1018
1.559
1.640
1.670
1.670
1.671
.015
.015
.015
.015
.015
.139
.139
.047
.070
.139
.004
.004
.003
.003
.004
5-034
5-327
5-143
5-329
5-1018
40.61
41.66
42.42
42.42
42.44
0.38
0.38
0.38
0.38
0.38
3.53
3.53
1.19
1.78
3.53
.10
.10
.08
.08
.10
.009
.009
.009
.009
.009
.141
.045
.123
.140
.040
.004
.003
.004
.004
.003
5-596
5-708
5-753
5-049
5-273
21.29
21.59
21.77
22.12
22.33
0.23
0.23
0.23
0.23
0.23
3.58
1.14
3.12
3.56
1.02
.10
.08
.10
.10
.08
5-330
5-671
5-332
5-025
5-035
1.674
1.680
1.687
1.765
1.786
.015
.015
.015
.016
.016
.210
.080
.139
.125
.139
.005
.003
.004
.004
.004
5-330
5-671
5-332
5-025
5-035
42.52
42.67
42.85
44.83
45.36
0.38
0.38
0.38
0.41
0.41
5.33
2.03
3.53
3.18
3.53
.13
.08
.10
.10
.10
.890
.898
.905
.968
.979
.009
.009
.009
.010
.010
.125
.031
.141
.141
.103
.004
.003
.004
.004
.003
5-022
5-138
5-597
5-598
5-278
22.61
22.81
22.99
24.59
24.87
0.23
0.23
0.23
0.25
0.25
3.18
0.79
3.58
3.58
2.62
.10
.08
.10
.10
.08
5-1023
5-335
5-794
5-1042
5-795
1.788
1.802
1.812
1.817
1.850
.016
.016
.016
.016
.016
.070
.062
.070
.257
.070
.003
.003
.003
.006
.003
5-1023
5-335
5-794
5-1042
5-795
45.42
45.77
46.02
46.15
46.99
0.41
0.41
0.41
0.41
0.41
1.78
1.57
1.78
6.53
1.78
.08
.08
.08
.15
.08
5-139
5-709
5-677
5-279
5-761
.987
1.000
1.004
1.004
1.010
.010
.010
.010
.010
.010
.031
.055
.081
.218
.062
.003
.003
.003
.005
.003
5-139
5-709
5-677
5-279
5-761
25.07
25.40
25.50
25.50
25.65
0.25
0.25
0.25
0.25
0.25
0.79
1.40
2.06
5.54
1.57
.08
.08
.08
.13
.08
5-981
5-011
5-337
5-1043
5-144
1.850
1.860
1.873
1.882
1.891
.016
.016
.016
.017
.017
.275
.080
.062
.118
.047
.006
.003
.003
.004
.003
5-981
5-011
5-337
5-1043
5-144
46.99
47.24
47.57
47.80
48.03
0.41
0.41
0.41
0.43
0.43
6.99
2.03
1.57
3.00
1.19
.15
.08
.08
.10
.08
5-618
5-599
1.016
1.031
.010 .139
.010 .141
.004
.004
5-618
5-599
25.81
26.19
0.25
0.25
3.53
3.58
.10
.10
5-796
5-338
1.913
1.925
.017 .070
.017 .210
.003
.005
5-796
5-338
48.59
48.90
0.43
0.43
1.78
5.33
.08
.13
Tol
(a) The rubber compound must be added when ordering by the 5-size number (i.e., 5-007 N0674-70).
(b) This chart provides dimensions for standard (AN) shrinkage materials ONLY. These correspond to AS568A dimensions. O-rings manufactured
out of compounds with different shrinkage rates (other than AN) will produce slightly different dimensions and tolerances. For more information
on shrinkage rates, see the Appendix.
Table 9-3: Parker Series 5-XXX O-Rings Size Cross Reference Table (Continued)
9-13
Seals
Sizes
5700 Handbook
Inches
Tol W
Tol
Metric
5-Size
I.D.
5-828
5-986
5-390
5-987
5-831
3.661
3.725
3.957
3.975
4.020
.028
.028
.028
.028
.030
.090
.275
.147
.275
.147
.003
.006
.004
.006
.004
5-828
5-986
5-390
5-987
5-831
92.99
94.62
100.51
100.97
102.11
0.71
0.71
0.71
0.71
0.76
2.29
6.99
3.73
6.99
3.73
.08
.15
.10
.15
.10
.10
.08
.10
.10
.25
5-1054
5-833
5-394
5-988
5-395
4.080
4.085
4.096
4.100
4.117
.030
.030
.030
.030
.030
.209
.103
.070
.275
.070
.005
.003
.003
.006
.003
5-1054
5-833
5-394
5-988
5-395
103.63
103.76
104.04
104.14
104.57
0.76
0.76
0.76
0.76
0.76
5.31
2.62
1.78
6.99
1.78
.13
.08
.08
.15
.08
1.19
1.57
1.78
6.99
2.03
.08
.08
.08
.15
.08
5-396
5-989
5-060
5-836
5-1056
4.171
4.225
4.390
4.427
4.484
.030
.030
.030
.030
.030
.070
.275
.044
.140
.172
.003
.006
.003
.004
.005
5-396
5-989
5-060
5-836
5-1056
105.94
107.32
111.51
112.45
113.89
0.76
0.76
0.76
0.76
0.76
1.78
6.99
1.12
3.56
4.37
.08
.15
.08
.10
.13
0.51
0.51
0.51
0.51
0.51
2.36
2.03
3.53
3.53
1.78
.08
.08
.10
.10
.08
5-401
5-1060
5-840
5-842
5-843
4.531
4.609
4.630
4.664
4.674
.030
.033
.033
.035
.035
.070
.150
.139
.122
.103
.003
.004
.004
.004
.003
5-401
5-1060
5-840
5-842
5-843
115.09
117.07
117.60
118.47
118.72
0.76
0.84
0.84
0.89
0.89
1.78
3.81
3.53
3.10
2.62
.08
.10
.10
.10
.08
64.11
64.39
65.10
65.43
67.84
0.51
0.51
0.51
0.51
0.56
2.62
1.78
3.53
2.08
3.53
.08
.08
.10
.08
.10
5-844
5-402
5-848
5-850
5-403
4.682
4.750
4.875
4.925
4.930
.035
.035
.035
.035
.035
.140
.188
.060
.260
.103
.004
.005
.003
.006
.003
5-844
5-402
5-848
5-850
5-403
118.92
120.65
123.83
125.10
125.22
0.89
0.89
0.89
0.89
0.89
3.56
4.78
1.52
6.60
2.62
.10
.13
.08
.15
.08
5-159
5-982
5-807
5-704
5-042
68.15
69.22
70.66
71.42
72.29
0.56
0.56
0.56
0.56
0.56
2.92
6.99
2.62
3.53
3.53
.10
.15
.08
.10
.10
5-851
5-852
5-853
5-559
5-407
4.984
5.030
5.057
5.236
5.249
.035
.035
.035
.035
.035
.147
.210
.233
.214
.123
.004
.005
.006
.005
.004
5-851
5-852
5-853
5-559
5-407
126.59
127.76
128.45
133.00
133.32
0.89
0.89
0.89
0.89
0.89
3.73
5.33
5.92
5.44
3.12
.10
.13
.15
.13
.10
.003
.003
.004
.006
.003
5-697
5-367
5-705
5-938
5-368
73.10
74.27
74.60
75.57
76.71
0.56
0.56
0.56
0.61
0.61
2.03
2.62
3.53
6.99
2.62
.08
.08
.10
.15
.08
5-408
5-410
5-412
5-855
5-856
5.265
5.340
5.414
5.444
5.465
.035
.035
.035
.035
.035
.139
.070
.103
.124
.070
.004
.003
.003
.004
.003
5-408
5-410
5-412
5-855
5-856
133.73
135.64
137.52
138.28
138.81
0.89
0.89
0.89
0.89
0.89
3.53
1.78
2.62
3.15
1.78
.10
.08
.08
.10
.08
.139
.103
.062
.112
.111
.004
.003
.003
.004
.004
5-044
5-369
5-810
5-811
5-1052
77.11
77.14
77.24
77.72
78.23
0.61
0.61
0.61
0.61
0.61
3.53
2.62
1.57
2.84
2.82
.10
.08
.08
.10
.10
5-413
5-414
5-858
5-416
5-062
5.475
5.487
5.500
5.553
5.604
.035
.035
.035
.035
.040
.164
.062
.168
.120
.070
.005
.003
.005
.004
.003
5-413
5-414
5-858
5-416
5-062
139.07
139.37
139.70
141.05
142.34
0.89
0.89
0.89
0.89
1.02
4.17
1.57
4.27
3.05
1.78
.13
.08
.13
.10
.08
.024
.024
.024
.024
.024
.070
.103
.100
.060
.139
.003
.003
.003
.003
.004
5-374
5-557
5-813
5-815
5-045
79.04
79.38
79.50
80.16
80.29
0.61
0.61
0.61
0.61
0.61
1.78
2.62
2.54
1.52
3.53
.08
.08
.08
.08
.10
5-417
5-063
5-862
5-863
5-420
5.616
5.750
5.789
5.815
5.826
.040
.040
.040
.040
.040
.127
.070
.252
.140
.314
.004
.003
.006
.004
.010
5-417
5-063
5-862
5-863
5-420
142.65
146.05
147.04
147.70
147.98
1.02
1.02
1.02
1.02
1.02
3.23
1.78
6.40
3.56
7.98
.10
.08
.15
.10
.25
3.162
3.210
3.225
3.300
3.350
.024
.024
.024
.026
.026
.070
.103
.275
.070
.275
.003
.003
.006
.003
.006
5-816
5-819
5-984
5-821
5-825
80.31
81.53
81.92
83.82
85.09
0.61
0.61
0.61
0.66
0.66
1.78
2.62
6.99
1.78
6.99
.08
.08
.15
.08
.15
5-969
5-421
5-573
5-567
5-1041
5.875
5.882
5.968
5.985
6.023
.040
.040
.040
.040
.040
.103
.110
.070
.070
.103
.003
.004
.003
.003
.003
5-969
5-421
5-573
5-567
5-1041
149.23
149.40
151.59
152.02
152.98
1.02
1.02
1.02
1.02
1.02
2.62
2.79
1.78
1.78
2.62
.08
.10
.08
.08
.08
5-1053
5-380
5-979
5-381
5-985
3.354
3.363
3.443
3.475
3.600
.026
.026
.026
.026
.026
.070
.155
.275
.275
.275
.003
.005
.006
.006
.006
5-1053
5-380
5-979
5-381
5-985
85.19
85.42
87.45
88.27
91.44
0.66
0.66
0.66
0.66
0.66
1.78
3.94
6.99
6.99
6.99
.08
.13
.15
.15
.15
5-064
5-428
5-430
5-666
5-869
6.350
6.361
6.482
6.520
6.609
.040
.040
.040
.040
.045
.275
.108
.170
.070
.139
.006
.004
.005
.003
.004
5-064
5-428
5-430
5-666
5-869
161.29
161.57
164.64
165.61
167.87
1.02
1.02
1.02
1.02
1.14
6.99
2.74
4.32
1.78
3.53
.15
.10
.13
.08
.10
5-385
5-031
3.603
3.640
.026 .220
.028 .125
.005
.004
5-385
5-031
91.52
92.46
0.66
0.71
5.59
3.18
.13
.10
5-871
5-434
6.850
7.108
.045 .275
.045 .275
.006
.006
5-871
5-434
173.99
180.54
1.14
1.14
6.99
6.99
.15
.15
Millimeters
Tol W
Std
Tol 5-Size
Std
5-Size
I.D.
Inches
Tol W
Tol
Metric
5-Size
I.D.
5-701
5-342
5-343
5-655
5-037
1.937
1.980
2.000
2.020
2.036
.017
.017
.018
.018
.018
.139
.038
.075
.070
.139
.004
.003
.003
.003
.004
5-701
5-342
5-343
5-655
5-037
49.20
50.29
50.80
51.31
51.71
0.43
0.43
0.46
0.46
0.46
3.53
0.97
1.91
1.78
3.53
.10
.08
.08
.08
.10
5-346
5-642
5-1044
5-027
5-1046
2.046
2.051
2.060
2.140
2.140
.018
.018
.018
.018
.018
.139
.070
.139
.125
.315
.004
.003
.004
.004
.010
5-346
5-642
5-1044
5-027
5-1046
51.97
52.10
52.32
54.36
54.36
0.46
0.46
0.46
0.46
0.46
3.53
1.78
3.53
3.18
8.00
5-145
5-347
5-348
5-800
5-014
2.141
2.163
2.172
2.225
2.230
.018
.018
.018
.018
.018
.047
.062
.070
.275
.080
.003
.003
.003
.006
.003
5-145
5-347
5-348
5-800
5-014
54.38
54.94
55.17
56.52
56.64
0.46
0.46
0.46
0.46
0.46
5-1047
5-015
5-702
5-039
5-354
2.281
2.296
2.312
2.411
2.471
.020
.020
.020
.020
.020
.093
.080
.139
.139
.070
.003
.003
.004
.004
.003
5-1047
5-015
5-702
5-039
5-354
57.94
58.32
58.72
61.24
62.76
5-355
5-805
5-703
5-358
5-361
2.524
2.535
2.563
2.576
2.671
.020
.020
.020
.020
.022
.103
.070
.139
.082
.139
.003
.003
.004
.003
.004
5-355
5-805
5-703
5-358
5-361
5-159
5-982
5-807
5-704
5-042
2.683
2.725
2.782
2.812
2.846
.022
.022
.022
.022
.022
.115
.275
.103
.139
.139
.004
.006
.003
.004
.004
5-697
5-367
5-705
5-938
5-368
2.878
2.924
2.937
2.975
3.020
.022
.022
.022
.024
.024
.080
.103
.139
.275
.103
5-044
5-369
5-810
5-811
5-1052
3.036
3.037
3.041
3.060
3.080
.024
.024
.024
.024
.024
5-374
5-557
5-813
5-815
5-045
3.112
3.125
3.130
3.156
3.161
5-816
5-819
5-984
5-821
5-825
Millimeters
Tol W
Tol
(a) The rubber compound must be added when ordering by the 5-size number (i.e., 5-007 N0674-70).
(b) This chart provides dimensions for standard (AN) shrinkage materials ONLY. These correspond to AS568A dimensions. O-rings manufactured
out of compounds with different shrinkage rates (other than AN) will produce slightly different dimensions and tolerances. For more information
on shrinkage rates, see the Appendix.
Table 9-3: Parker Series 5-XXX O-Rings Size Cross Reference Table (Continued)
9-14
Seals
Sizes
5700 Handbook
Tol
Metric
5-Size
I.D.
12.475
12.623
12.705
12.725
12.840
.070
.070
.070
.070
.070
.139
.140
.070
.275
.139
.004
.004
.003
.006
.004
5-569
5-905
5-906
5-907
5-908
316.87
320.62
322.71
323.22
326.14
1.78
1.78
1.78
1.78
1.78
3.53
3.56
1.78
6.99
3.53
.10
.10
.08
.15
.10
5-611
5-619
5-570
5-492
5-070
12.900
12.915
13.002
13.248
13.270
.070
.070
.070
.070
.070
.159
.139
.139
.139
.139
.005
.004
.004
.004
.004
5-611
5-619
5-570
5-492
5-070
327.66
328.04
330.25
336.50
337.06
1.78
1.78
1.78
1.78
1.78
4.04
3.53
3.53
3.53
3.53
.13
.10
.10
.10
.10
.15
.15
.10
.08
.08
5-910
5-071
5-072
5-493
5-494
13.375
13.410
13.460
13.490
13.541
.070
.070
.070
.070
.070
.210
.139
.210
.139
.210
.005
.004
.005
.004
.005
5-910
5-071
5-072
5-493
5-494
339.73
340.61
341.88
342.65
343.94
1.78
1.78
1.78
1.78
1.78
5.33
3.53
5.33
3.53
5.33
.13
.10
.13
.10
.13
5.33
2.62
2.62
2.62
1.78
.13
.08
.08
.08
.08
5-495
5-496
5-498
5-500
5-912
13.601
13.616
13.650
13.718
13.734
.070
.070
.070
.070
.070
.139
.141
.139
.275
.139
.004
.004
.004
.006
.004
5-495
5-496
5-498
5-500
5-912
345.47
345.85
346.71
348.44
348.84
1.78
1.78
1.78
1.78
1.78
3.53
3.58
3.53
6.48
3.53
.10
.10
.10
.15
.10
1.52
1.52
1.52
1.52
1.52
3.53
2.84
3.53
3.53
6.99
.10
.10
.10
.10
.15
5-1097
5-073
5-564
5-502
5-624
13.750
13.820
14.062
14.088
14.111
.070
.080
.080
.080
.080
.103
.139
.139
.210
.139
.003
.004
.004
.005
.004
5-1097
5-073
5-564
5-502
5-624
349.25
351.03
357.17
357.84
358.42
1.78
2.03
2.03
2.03
2.03
2.62
3.53
3.53
5.33
3.53
.08
.10
.10
.13
.10
263.12
263.45
264.80
266.80
269.39
1.52
1.52
1.52
1.52
1.52
3.53
2.64
6.60
3.18
2.62
.10
.08
.15
.10
.08
5-074
5-916
5-504
5-626
5-505
14.234
14.369
14.430
14.470
14.470
.080
.080
.080
.080
.080
.139
.278
.139
.087
.139
.004
.006
.004
.003
.004
5-074
5-916
5-504
5-626
5-505
361.54
364.97
366.52
367.54
367.54
2.03
2.03
2.03
2.03
2.03
3.53
7.06
3.53
2.21
3.53
.10
.15
.10
.08
.10
5-623
5-464
5-656
5-891
5-466
270.00
270.66
271.83
272.64
273.03
1.52
1.52
1.52
1.52
1.52
3.53
1.78
1.78
3.53
5.33
.10
.08
.08
.10
.10
5-506
5-507
5-508
5-166
5-920
14.570
14.600
14.674
14.722
14.780
.080
.080
.080
.080
.080
.141
.210
.139
.139
.175
.004
.005
.004
.004
.005
5-506
5-507
5-508
5-166
5-920
370.08
370.84
372.72
373.94
375.41
2.03
2.03
2.03
2.03
2.03
3.58
5.33
3.53
3.53
4.45
.10
.13
.10
.10
.13
.003
.003
.004
.003
.006
5-469
5-893
5-471
5-894
5-474
276.43
278.00
279.27
279.30
287.81
1.52
1.52
1.52
1.52
1.52
2.62
1.80
3.78
2.62
6.99
.08
.08
.10
.10
.15
5-921
5-922
5-923
5-512
5-076
14.795
14.990
15.062
15.171
15.260
.080
.080
.080
.080
.080
.071
.104
.104
.139
.210
.003
.003
.003
.004
.005
5-921
5-922
5-923
5-512
5-076
375.79
380.75
382.57
385.34
387.60
2.03
2.03
2.03
2.03
2.03
1.80
2.64
2.64
3.53
5.33
.08
.08
.08
.10
.13
.103
.275
.210
.139
.139
.003
.006
.005
.004
.004
5-898
5-476
5-650
5-069
5-478
287.91
293.67
293.88
298.45
301.24
1.52
1.78
1.78
1.78
1.78
2.62
6.99
5.33
3.53
3.53
.08
.15
.13
.10
.10
5-077
5-924
5-925
5-079
5-515
15.300
15.410
15.465
15.540
15.548
.080
.080
.080
.080
.080
.139
.210
.188
.139
.210
.004
.005
.005
.004
.005
5-077
5-924
5-925
5-079
5-515
388.62
391.41
392.81
394.72
394.92
2.03
2.03
2.03
2.03
2.03
3.53
5.33
4.78
3.53
5.33
.10
.13
.13
.10
.13
.070
.070
.070
.070
.070
.159
.187
.285
.139
.210
.005
.005
.006
.004
.005
5-576
5-900
5-480
5-482
5-164
304.80
304.80
305.23
307.57
308.86
1.78
1.78
1.78
1.78
1.78
4.04
4.75
7.24
3.53
5.33
.13
.13
.15
.10
.13
5-516
5-517
5-1099
5-518
5-571
15.740
15.750
16.014
16.031
16.234
.080
.080
.080
.080
.090
.139
.275
.102
.256
.139
.004
.006
.003
.006
.004
5-516
5-517
5-1099
5-518
5-571
399.80
400.05
406.76
407.19
412.34
2.03
2.03
2.03
2.03
2.29
3.53
6.99
2.59
6.50
3.53
.10
.15
.08
.15
.10
12.234
12.250
12.260
12.299
12.360
.070
.070
.070
.070
.070
.139
.150
.139
.137
.210
.004
.005
.004
.004
.005
5-901
5-484
5-485
5-486
5-902
310.74
311.15
311.40
312.39
313.94
1.78
1.78
1.78
1.78
1.78
3.53
3.81
3.53
3.48
5.33
.10
.13
.10
.10
.13
5-930
5-520
5-521
5-522
5-080
16.285
16.435
16.455
16.507
16.575
.090
.090
.090
.090
.090
.250
.139
.210
.225
.187
.006
.004
.005
.006
.005
5-930
5-520
5-521
5-522
5-080
413.64
417.45
417.96
419.28
421.01
2.29
2.29
2.29
2.29
2.29
6.35
3.53
5.33
5.72
4.75
.15
.10
.13
.15
.13
12.380
12.463
.070 .139
.070 .103
.004
.003
5-487
5-488
314.45
316.56
1.78
1.78
3.53
2.62
.10
.08
5-524
5-622
16.640
16.750
.090 .210
.090 .275
.005
.006
5-524
5-622
422.66
425.45
2.29
2.29
5.33
6.99
.13
.15
Millimeters
Tol W
Std
Tol 5-Size
Std
5-Size
I.D.
Inches
Tol W
Tol
Metric
5-Size
I.D.
5-696
5-691
5-873
5-975
5-875
7.110
7.139
7.230
7.425
7.580
.045
.045
.045
.045
.050
.103
.072
.070
.260
.210
.003
.003
.003
.006
.005
5-696
5-691
5-873
5-975
5-875
180.59
181.33
183.64
188.60
192.53
1.14
1.14
1.14
1.14
1.27
2.62
1.83
1.78
6.60
5.33
.08
.08
.08
.15
.13
5-569
5-905
5-906
5-907
5-908
5-438
5-439
5-876
5-877
5-442
7.613
7.640
7.674
7.802
8.015
.050
.050
.050
.050
.050
.070
.125
.210
.104
.187
.003
.004
.005
.003
.005
5-438
5-439
5-876
5-877
5-442
193.37
194.06
194.92
198.17
203.58
1.27
1.27
1.27
1.27
1.27
1.78
3.18
5.33
2.64
4.75
.08
.10
.13
.08
.13
5-445
5-880
5-971
5-575
5-450
8.277
8.350
8.590
8.875
9.071
.050
.050
.050
.055
.055
.275
.275
.139
.070
.062
.006
.006
.004
.003
.003
5-445
5-880
5-971
5-575
5-450
210.24
212.09
218.19
225.42
230.40
1.27
1.27
1.27
1.40
1.40
6.99
6.99
3.53
1.78
1.57
5-882
5-635
5-454
5-883
5-884
9.162
9.370
9.565
9.820
9.984
.055
.055
.055
.060
.060
.210
.103
.103
.103
.070
.005
.003
.003
.003
.003
5-882
5-635
5-454
5-883
5-884
232.72
238.00
242.95
249.43
253.59
1.40
1.40
1.40
1.52
1.52
5-885
5-886
5-457
5-458
5-887
10.171
10.178
10.232
10.340
10.343
.060
.060
.060
.060
.060
.139
.112
.139
.139
.275
.004
.004
.004
.004
.006
5-885
5-886
5-457
5-458
5-887
258.34
258.52
259.89
262.64
262.71
5-165
5-889
5-976
5-463
5-890
10.359
10.372
10.425
10.504
10.606
.060
.060
.060
.060
.060
.139
.104
.260
.125
.103
.004
.003
.006
.004
.003
5-165
5-889
5-976
5-463
5-890
5-623
5-464
5-656
5-891
5-466
10.630
10.656
10.702
10.734
10.749
.060
.060
.060
.060
.060
.139
.070
.070
.139
.210
.004
.003
.003
.004
.005
5-469
5-893
5-471
5-894
5-474
10.883
10.945
10.995
10.996
11.331
.060
.060
.060
.060
.060
.103
.071
.149
.103
.275
5-898
5-476
5-650
5-069
5-478
11.335
11.562
11.570
11.750
11.860
.060
.070
.070
.070
.070
5-576
5-900
5-480
5-482
5-164
12.000
12.000
12.017
12.109
12.160
5-901
5-484
5-485
5-486
5-902
5-487
5-488
I.D.
Millimeters
Tol W
Tol
(a) The rubber compound must be added when ordering by the 5-size number (i.e., 5-007 N0674-70).
(b) This chart provides dimensions for standard (AN) shrinkage materials ONLY. These correspond to AS568A dimensions. O-rings manufactured
out of compounds with different shrinkage rates (other than AN) will produce slightly different dimensions and tolerances. For more information
on shrinkage rates, see the Appendix.
Table 9-3: Parker Series 5-XXX O-Rings Size Cross Reference Table (Continued)
9-15
Seals
Sizes
5700 Handbook
I.D.
Inches
Tol W
Tol
Metric
5-Size
I.D.
Millimeters
Tol W
Std
Tol 5-Size
I.D.
Inches
Tol W
Tol
Metric
5-Size
I.D.
Millimeters
Tol W
Tol
5-525
5-081
5-935
5-526
5-082
16.765
16.830
17.100
17.250
17.250
.090
.090
.090
.090
.090
.125
.210
.275
.187
.240
.004
.005
.006
.005
.006
5-525
5-081
5-935
5-526
5-082
425.83
427.48
434.34
438.15
438.15
2.29
2.29
2.29
2.29
2.29
3.18
5.33
6.99
4.75
6.10
.10
.13
.15
.13
.15
5-948
5-1022
5-950
5-087
5-1019
19.725
19.941
19.960
20.020
20.180
.100
.100
.100
.100
.100
.210
.289
.139
.275
.125
.005
.007
.004
.006
.004
5-948
5-1022
5-950
5-087
5-1019
501.02
506.50
506.98
508.51
512.57
2.54
2.54
2.54
2.54
2.54
5.33
7.34
3.53
6.99
3.18
.13
.18
.10
.15
.10
5-528
5-936
5-937
5-529
5-1100
17.268
17.296
17.390
17.455
17.500
.090
.090
.090
.090
.090
.242
.210
.139
.139
.139
.006
.005
.004
.004
.004
5-528
5-936
5-937
5-529
5-1100
438.61
439.32
441.71
443.36
444.50
2.29
2.29
2.29
2.29
2.29
6.15
5.33
3.53
3.53
3.53
.15
.13
.10
.10
.10
5-1010
5-088
5-547
5-953
5-549
20.609
21.180
21.564
22.360
22.500
.100
.100
.100
.100
.100
.139
.147
.139
.132
.250
.004
.004
.004
.004
.006
5-1010
5-088
5-547
5-953
5-549
523.47
537.97
547.73
567.94
571.50
2.54
2.54
2.54
2.54
2.54
3.53
3.73
3.53
3.35
6.35
.10
.10
.10
.10
.15
5-939
5-621
5-083
5-532
5-084
17.870
17.875
17.910
18.000
18.062
.090
.090
.090
.090
.090
.210
.187
.139
.103
.281
.005
.005
.004
.003
.006
5-939
5-621
5-083
5-532
5-084
453.90
454.03
454.91
457.20
458.77
2.29
2.29
2.29
2.29
2.29
5.33
4.75
3.53
2.62
7.16
.13
.13
.10
.08
.15
5-089
5-551
5-090
5-552
5-167
23.406
23.540
23.576
23.612
23.780
.120
.120
.120
.120
.120
.281
.139
.139
.275
.375
.006
.004
.004
.006
.007
5-089
5-551
5-090
5-552
5-167
594.51
597.92
598.83
599.74
604.01
3.05
3.05
3.05
3.05
3.05
7.14
3.53
3.53
6.99
9.52
.15
.10
.10
.15
.18
5-533
5-1102
5-085
5-534
5-1104
18.169
18.265
18.350
18.405
18.500
.090
.090
.090
.090
.090
.096
.210
.210
.210
.188
.003
.005
.005
.005
.005
5-533
5-1102
5-085
5-534
5-1104
461.49
463.93
466.09
467.49
469.90
2.29
2.29
2.29
2.29
2.29
2.44
5.33
5.33
5.33
4.78
.08
.13
.13
.13
.13
5-168
5-169
5-091
5-170
5-171
24.875
25.153
25.474
25.500
26.125
.120
.120
.120
.120
.120
.250
.214
.139
.275
.275
.006
.005
.004
.006
.006
5-168
5-169
5-091
5-170
5-171
631.82
638.89
647.04
647.70
663.58
3.05
3.05
3.05
3.05
3.05
6.35
5.44
3.53
6.99
6.99
.15
.13
.10
.15
.15
5-1105
5-943
5-944
5-946
5-947
18.635
18.870
18.880
19.310
19.380
.090
.100
.100
.100
.100
.139
.275
.139
.140
.139
.004
.006
.004
.004
.004
5-1105
5-943
5-944
5-946
5-947
473.33
479.30
479.55
490.47
492.25
2.29
2.54
2.54
2.54
2.54
3.53
6.99
3.53
3.56
3.53
.10
.15
.10
.10
.10
5-173
5-631
5-172
5-092
5-955
26.188
26.408
27.485
27.625
28.801
.120
.120
.120
.120
.140
.210
.139
.275
.275
.275
.005
.004
.006
.006
.006
5-173
5-631
5-172
5-092
5-955
665.18
670.76
698.12
701.68
731.55
3.05
3.05
3.05
3.05
3.56
5.33
3.53
6.99
6.99
6.99
.13
.10
.15
.15
.15
5-540
5-541
5-086
19.437
19.500
19.580
.100 .375
.100 .250
.100 .210
.007
.006
.005
5-540
5-541
5-086
493.70
495.30
497.33
2.54
2.54
2.54
9.52
6.35
5.33
.18
.15
.13
(a) The rubber compound must be added when ordering by the 5-size number (i.e., 5-007 N0674-70).
(b) This chart provides dimensions for standard (AN) shrinkage materials ONLY. These correspond to AS568A dimensions. O-rings manufactured
out of compounds with different shrinkage rates (other than AN) will produce slightly different dimensions and tolerances. For more information
on shrinkage rates, see the Appendix.
Table 9-3: Parker Series 5-XXX O-Rings Size Cross Reference Table (Continued)
9-16
Seals
Sizes
5700 Handbook
I.D.
Size
I.D.
Size
I.D.
Size
I.D.
Size
I.D.
5-001
5-002
5-003
5-004
5-005
5-006
5-008
5-009
5-011
5-014
5-015
5-018
5-021
5-022
5-024
5-025
5-027
5-031
5-034
5-035
5-037
5-039
5-042
5-044
5-045
5-049
5-051
5-052
5-056
5-057
5-058
5-060
5-062
5-063
5-064
5-069
5-070
5-071
5-072
5-073
5-074
5-076
5-077
5-079
5-080
5-081
5-082
5-083
5-084
5-085
5-086
5-087
5-088
5-089
5-090
.547
.416
.836
1.070
.640
.796
1.421
1.553
1.860
2.230
2.296
.352
.603
.890
1.515
1.765
2.140
3.640
1.599
1.786
2.036
2.411
2.846
3.036
3.161
.871
.070
.270
.301
.364
.426
4.390
5.604
5.750
6.350
11.750
13.270
13.410
13.460
13.820
14.234
15.260
15.300
15.540
16.575
16.830
17.250
17.910
18.062
18.350
19.580
20.020
21.180
23.406
23.576
5-091
5-092
5-101
5-102
5-103
5-105
5-106
5-107
5-108
5-118
5-124
5-125
5-127
5-133
5-134
5-135
5-136
5-137
5-138
5-139
5-140
5-141
5-142
5-143
5-144
5-145
5-148
5-151
5-152
5-156
5-157
5-158
5-159
5-160
5-162
5-164
5-165
5-166
5-167
5-168
5-169
5-170
5-171
5-172
5-173
5-178
5-179
5-180
5-181
5-187
5-190
5-193
5-194
5-197
5-200
25.474
27.625
.100
.116
.128
.154
.154
.176
.176
.059
.176
.180
.239
.332
.410
.526
.643
.775
.898
.987
1.112
1.226
1.450
1.670
1.891
2.141
.154
.239
.301
.575
1.338
1.550
2.683
.312
.554
12.160
10.359
14.722
23.780
24.875
25.153
25.500
26.125
27.485
26.188
.120
.239
.248
.725
.070
.132
.176
.228
.242
.265
5-202
5-204
5-205
5-206
5-209
5-211
5-212
5-215
5-218
5-222
5-223
5-225
5-230
5-231
5-236
5-239
5-242
5-243
5-247
5-248
5-250
5-251
5-252
5-254
5-256
5-257
5-263
5-264
5-266
5-273
5-278
5-279
5-290
5-291
5-294
5-295
5-296
5-297
5-301
5-309
5-312
5-320
5-321
5-327
5-329
5-330
5-332
5-335
5-337
5-338
5-342
5-343
5-346
5-347
5-348
.278
.312
.312
.326
.370
.375
.384
.418
.425
.455
.458
.469
.500
.501
.562
.570
.600
.604
.623
.625
.627
.631
.652
.660
.707
.772
.750
.752
.766
.879
.979
1.004
1.180
1.186
1.213
1.225
1.229
1.230
1.259
1.436
1.454
1.540
1.559
1.640
1.670
1.674
1.687
1.802
1.873
1.925
1.980
2.000
2.046
2.163
2.172
5-354
5-355
5-358
5-361
5-367
5-368
5-369
5-374
5-380
5-381
5-385
5-390
5-394
5-395
5-396
5-401
5-402
5-403
5-1068
5-407
5-408
5-410
5-412
5-413
5-414
5-416
5-417
5-420
5-421
5-428
5-430
5-434
5-438
5-439
5-442
5-445
5-450
5-454
5-457
5-458
5-463
5-464
5-466
5-469
5-471
5-474
5-476
5-478
5-480
5-482
5-484
5-485
5-486
5-487
5-488
2.471
2.524
2.576
2.671
2.924
3.020
3.037
3.112
3.363
3.475
3.603
3.957
4.096
4.117
4.171
4.531
4.750
4.930
5.139
5.249
5.265
5.340
5.414
5.475
5.487
5.553
5.616
5.826
5.882
6.361
6.482
7.108
7.613
7.640
8.015
8.277
9.071
9.565
10.232
10.340
10.504
10.656
10.749
10.883
10.995
11.331
11.562
11.860
12.017
12.109
12.250
12.260
12.299
12.380
12.463
5-492
5-493
5-494
5-495
5-496
5-498
5-500
5-502
5-504
5-505
5-506
5-507
5-508
5-512
5-515
5-516
5-517
5-518
5-520
5-521
5-522
5-524
5-525
5-526
5-528
5-529
5-532
5-533
5-534
5-540
5-541
5-547
5-549
5-551
5-552
5-557
5-559
5-563
5-564
5-566
5-567
5-569
5-570
5-571
5-573
5-575
5-576
5-578
5-579
5-580
5-581
5-582
5-583
5-584
5-585
13.248
13.490
13.541
13.601
13.616
13.650
13.718
14.088
14.430
14.470
14.570
14.600
14.674
15.171
15.548
15.740
15.750
16.031
16.435
16.455
16.507
16.640
16.765
17.250
17.268
17.455
18.000
18.169
18.405
19.437
19.500
21.564
22.500
23.540
23.612
3.125
5.236
.583
14.062
.489
5.985
12.475
13.002
16.234
5.968
8.875
12.000
.102
.133
.165
.192
.224
.251
.283
.314
Seals
Sizes
5700 Handbook
I.D.
Size
I.D.
Size
I.D.
Size
I.D.
Size
I.D.
5-586
5-587
5-588
5-590
5-591
5-592
5-593
5-594
5-595
5-596
5-597
5-598
5-599
5-600
5-601
5-602
5-603
5-604
5-605
5-606
5-609
5-611
5-612
5-613
5-614
5-615
5-616
5-617
5-618
5-619
5-621
5-622
5-623
5-624
5-626
5-631
5-632
5-635
5-638
5-642
5-643
5-646
5-650
5-652
.350
.350
.413
.535
.594
.665
.724
.720
.779
.838
.905
.968
1.031
1.094
1.153
1.212
1.279
1.342
1.401
1.468
.600
12.900
.344
.437
.391
.469
.516
.625
1.016
12.915
17.875
16.750
10.630
14.111
14.470
26.408
.110
9.370
.233
2.051
.650
.126
11.570
.473
5-655
5-656
5-657
5-664
5-666
5-669
5-670
5-671
5-673
5-675
5-676
5-677
5-682
5-683
5-685
5-686
5-687
5-691
5-696
5-697
5-698
5-699
5-700
5-701
5-702
5-703
5-704
5-705
5-708
5-709
5-710
5-712
5-716
5-718
5-725
5-726
5-735
5-736
5-743
5-745
5-751
5-753
5-761
5-763
2.020
10.702
1.465
.320
6.520
.146
1.437
1.680
.305
.508
.610
1.004
.426
.122
.208
.248
.287
7.139
7.110
2.878
.283
.353
.354
1.937
2.312
2.563
2.812
2.937
.850
1.000
.301
.313
.362
.395
.470
.484
.583
.590
.660
.687
.820
.857
1.010
1.080
5-769
5-780
5-788
5-794
5-795
5-796
5-800
5-805
5-807
5-810
5-811
5-813
5-815
5-816
5-819
5-821
5-825
5-828
5-831
5-833
5-836
5-840
5-842
5-843
5-844
5-848
5-850
5-851
5-852
5-853
5-855
5-856
5-858
5-862
5-863
5-869
5-871
5-873
5-875
5-876
5-877
5-880
5-882
5-883
1.176
1.412
1.591
1.812
1.850
1.913
2.225
2.535
2.782
3.041
3.060
3.130
3.156
3.162
3.210
3.300
3.350
3.661
4.020
4.085
4.427
4.630
4.664
4.674
4.682
4.875
4.925
4.984
5.030
5.057
5.444
5.465
5.500
5.789
5.815
6.609
6.850
7.230
7.580
7.674
7.802
8.350
9.162
9.820
5-884
5-885
5-886
5-887
5-889
5-890
5-891
5-893
5-894
5-898
5-900
5-901
5-902
5-905
5-906
5-907
5-908
5-910
5-912
5-916
5-920
5-921
5-922
5-923
5-924
5-925
5-930
5-935
5-936
5-937
5-939
5-943
5-944
5-946
5-947
5-948
5-950
5-953
5-955
5-964
5-969
5-971
5-975
9.984
10.171
10.178
10.343
10.372
10.606
10.734
10.945
10.996
11.335
12.000
12.234
12.360
12.623
12.705
12.725
12.840
13.375
13.734
14.369
14.780
14.795
14.990
15.062
15.410
15.465
16.285
17.100
17.296
17.390
17.870
18.870
18.880
19.310
19.380
19.725
19.960
22.360
28.801
.744
5.875
8.590
7.425
5-976
5-979
5-980
5-981
5-982
5-983
5-984
5-985
5-986
5-987
5-988
5-989
5-1002
5-1004
5-1006
5-1007
5-1010
5-1011
5-1014
5-1017
5-1018
5-1019
5-1022
5-1023
5-1028
5-1030
5-1041
5-1042
5-1043
5-1044
5-1046
5-1047
5-1052
5-1053
5-1054
5-1056
5-1060
5-1097
5-1099
5-1100
5-1102
5-1104
5-1105
10.425
3.443
1.475
1.850
2.725
2.975
3.225
3.600
3.725
3.975
4.100
4.225
.239
.290
.322
.330
20.609
.447
.525
.709
1.671
20.180
19.941
1.788
1.190
19.512
6.023
1.817
1.882
2.060
2.140
2.281
3.080
3.354
4.080
4.484
4.609
13.750
16.014
17.500
18.265
18.500
18.635
9-18
Seals
Sizes
5700 Handbook
x
x
x
x
x
x
7.00 0.15
5.30 0.13
7.00 0.15
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
112,0
115,0
118,0
122,0
125,0
128,0
132,0
136,0
140,0
145,0
150,0
155,0
160,0
165,0
170,0
175,0
180,0
185,0
190,0
195,0
200,0
206,0
212,0
218,0
224,0
230,0
236,0
243,0
250,0
258,0
265,0
272,0
280,0
290,0
300,0
307,0
315,0
325,0
335,0
345,0
355,0
365,0
375,0
387,0
400,0
0,74
0,76
0,77
0,80
0,81
0,83
0,85
0,87
0,89
0,92
0,95
0,98
1,00
1,03
1,06
1,09
1,11
1,14
1,17
1,20
1,22
1,26
1,29
1,32
1,35
1,39
1,42
1,46
1,49
1,54
1,57
1,61
1,65
1,71
1,76
1,80
1,84
1,90
1,95
2,00
2,06
2,11
2,16
2,23
2,29
7.00 0.15
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
5.30 0.13
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
3.55 0.10
x
x
x
x
x
x
x
x
x
x
x
x
x
x
Tol.
2.65 0.09
0,27
0,28
0,29
0,29
0,3
0,31
0,31
0,32
0,32
0,33
0,34
0,35
0,35
0,36
0,37
0,38
0,38
0,39
0,40
0,41
0,42
0,42
0,44
0,45
0,45
0,46
0,48
0,49
0,50
0,51
0,52
0,53
0,55
0,56
0,57
0,59
0,60
0,62
0,63
0,64
0,66
0,67
0,69
0,71
0,72
Inside Dia.
d1 (mm)
Cross-Section
d2 (mm)
1.80 0.08
30,0
31,5
32,5
33,5
34,5
35,5
36,5
37,5
38,7
40,0
41,2
42,5
43,7
45,0
46,2
47,5
48,7
50,0
51,5
53,0
54,5
56,0
58,0
60,0
61,5
63,0
65,0
67,0
69,0
71,0
73,0
75,0
77,5
80,0
82,5
85,0
87,5
90,0
92,5
95,0
97,5
100,0
103,0
106,0
109,0
3.55 0.10
Tol.
2.65 0.09
5.30 0.13
3.55 0.10
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
2.65 0.09
0,13
0,13
0,13
0,13
0,13
0,13
0,13
0,13
0,13
0,13
0,13
0,13
0,13
0,13
0,13
0,13
0,13
0,13
0,14
0,14
0,14
0,14
0,15
0,15
0,15
0,15
0,15
0,16
0,16
0,17
0,17
0,17
0,18
0,18
0,19
0,20
0,20
0,21
0,21
0,22
0,23
0,24
0,24
0,25
0,25
0,26
Inside Dia.
d1 (mm)
Cross-Section
d2 (mm)
1.80 0.08
1,8
2,0
2,24
2,5
2,8
3,15
3,55
3,75
4,0
4,5
4,87
5,0
5,15
5,3
5,6
6,0
6,3
6,7
6,9
7,1
7,5
8,0
8,5
8,75
9,0
9,5
10,0
10,6
11,2
11,8
12,5
13,2
14,0
15,0
16,0
17,0
18,0
19,0
20,0
21,2
22,4
23,6
25,0
25,8
26,5
28,0
Tol.
1.80 0.08
Inside Dia.
d1 (mm)
Cross-Section
d2 (mm)
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
Table 9-5: Inside Diameters, Cross Sections and Tolerances for Aerospace Applications Series A (ISO 3601-1)
9-19
Seals
Sizes
5700 Handbook
x
x
x
x
x
x
x
x
x
x
x
x
x
x
1,31
1,34
1,38
1,41
1,44
1,48
1,51
1,55
1,59
1,63
1,67
1,71
1,75
1,79
1,83
1,88
1,93
1,98
2,02
2,08
2,14
2,21
2,25
2,30
2,37
2,43
2,49
2,56
2,62
2,68
2,76
2,84
2,91
2,99
3,07
3,15
3,22
3,30
3,37
3,45
3,54
3,63
3,72
3,81
3,93
4,05
4,13
4,22
4,34
4,46
2.65 0.09
7.00 0.15
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
165,0
170,0
175,0
180,0
185,0
190,0
195,0
200,0
206,0
212,0
218,0
224,0
230,0
236,0
243,0
250,0
258,0
265,0
272,0
280,0
290,0
300,0
307,0
315,0
325,0
335,0
345,0
355,0
365,0
375,0
387,0
400,0
412,0
425,0
437,0
450,0
462,0
475,0
487,0
500,0
515,0
530,0
545,0
560,0
580,0
600,0
615,0
630,0
650,0
670,0
1.80 0.08
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
7.00 0.15
x
x
x
5.30 0.13
1.80 0.08
7.00 0.15
5.30 0.13
3.55 0.10
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
0,35
0,36
0,37
0,38
0,39
0,40
0,41
0,42
0,43
0,44
0,45
0,46
0,47
0,48
0,50
0,51
0,52
0,54
0,55
0,56
0,58
0,59
0,61
0,63
0,64
0,66
0,67
0,69
0,71
0,73
0,75
0,77
0,79
0,81
0,83
0,84
0,87
0,89
0,91
0,93
0,95
0,97
1,00
1,03
1,05
1,08
1,10
1,13
1,17
1,20
1,24
1,27
Tol.
5.30 0.13
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
36,5
37,5
38,7
40,0
41,2
42,5
43,7
45,0
46,2
47,5
48,7
50,0
51,5
53,0
54,5
56,0
58,0
60,0
61,5
63,0
65,0
67,0
69,0
71,0
73,0
75,0
77,5
80,0
82,5
85,0
87,5
90,0
92,5
95,0
97,5
100,0
103,0
106,0
109,0
112,0
115,0
118,0
122,0
125,0
128,0
132,0
136,0
140,0
145,0
150,0
155,0
160,0
Inside Dia.
d1 (mm)
Cross-Section
d2 (mm)
3.55 0.10
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
Tol.
3.55 0.10
0,13
0,13
0,13
0,13
0,14
0,14
0,14
0,14
0,14
0,14
0,15
0,15
0,15
0,15
0,15
0,15
0,15
0,16
0,16
0,16
0,16
0,16
0,16
0,17
0,17
0,17
0,17
0,18
0,18
0,19
0,19
0,19
0,19
0,20
0,20
0,21
0,21
0,22
0,22
0,23
0,24
0,24
0,25
0,26
0,26
0,28
0,29
0,31
0,32
0,32
0,33
0,34
Inside Dia.
d1 (mm)
Cross-Section
d2 (mm)
2.65 0.09
1,8
2,0
2,24
2,5
2,8
3,15
3,55
3,75
4,0
4,5
4,87
5,0
5,15
5,3
5,6
6,0
6,3
6,7
6,9
7,1
7,5
8,0
8,5
8,75
9,0
9,5
10,0
10,6
11,2
11,8
12,5
13,2
14,0
15,0
16,0
17,0
18,0
19,0
20,0
21,2
22,4
23,6
25,0
25,8
26,5
28,0
30,0
31,5
32,5
33,5
34,5
35,5
2.65 0.09
Tol.
1.80 0.08
Inside Dia.
d1 (mm)
Cross-Section
d2 (mm)
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
Table 9-6: Inside Diameters, Cross Sections and Tolerances for Aerospace Applications Series G (ISO 3601-1)
9-20
Seals
Sizes
5700 Handbook
P
P
P
P
P
3
4
5
6
7
Thickness
W (mm)
1.9
0.08
Inner Diameter
d (mm)
2.8
3.8
4.8
5.8
6.8
0.14
0.14
0.15
0.15
0.16
7.8
8.8
9.8
JIS
B 2401
P 48
P 49
P 50
Thickness
W (mm)
3.5
0.10
Inner Diameter
d (mm)
JIS
B 2401
47.7
48.7
49.7
0.44
0.45
0.45
P
P
P
P
P
200
205
209
210
215
199.5
204.5
208.5
209.5
214.5
1.55
1.58
1.61
1.62
1.65
P
P
P
P
P
220
225
230
235
240
219.5
224.5
229.5
234.5
239.5
1.68
1.71
1.75
1.78
1.81
P
P
P
P
P
245
250
255
260
265
244.5
249.5
254.5
259.5
264.5
1.84
1.88
1.91
1.94
1.97
P
P
P
P
P
270
275
280
285
290
269.5
274.5
279.5
284.5
289.5
2.01
2.04
2.07
2.10
2.14
P
P
P
P
P
295
300
315
320
335
294.5
299.5
314.5
319.5
334.5
2.17
2.20
2.30
2.33
2.42
P
P
P
P
P
P
340
355
360
375
385
400
339.5
354.5
359.5
374.5
384.5
399.5
2.45
2.54
2.57
2.67
2.73
2.82
G
G
G
G
G
25
30
35
40
45
24.4
29.4
34.4
39.4
44.4
0.25
0.29
0.33
0.37
0.41
G
G
G
G
G
50
55
60
65
70
49.4
54.4
50.4
64.4
69.4
0.45
0.49
0.53
0.57
0.61
G
G
G
G
G
75
80
85
90
95
74.4
79.4
84.4
89.4
94.4
0.65
0.69
0.73
0.77
0.81
0.16
0.17
0.17
P
P
P
P
P
48A
50A
52
53
55
47.6
49.6
51.6
52.6
54.6
0.45
0.45
0.47
0.48
0.49
9.8
10.8
11.0
11.8
12.3
0.17
0.18
0.18
0.19
0.19
P
P
P
P
P
56
58
60
62
63
55.6
57.6
59.6
61.6
62.6
0.50
0.52
0.53
0.55
0.56
13.8
14.8
15.8
17.8
19.8
0.19
0.20
0.20
0.21
0.22
P
P
P
P
P
65
67
70
71
75
64.6
66.6
69.6
70.6
74.6
0.57
0.59
0.61
0.62
0.65
P 21
P 22
20.8
21.8
0.23
0.24
P
P
P
P
P
22A
22.4
24
25
25.5
21.7
22.1
23.7
24.7
25.2
0.24
0.24
0.24
0.25
0.25
P 80
P 85
P 90
P 95
P 100
79.6
84.6
89.6
94.6
99.6
0.69
0.73
0.77
0.81
0.84
P
P
P
P
P
26
28
29
29.5
30
25.7
27.7
28.7
29.2
29.7
0.26
0.28
0.29
0.29
0.29
P 102
P 105
P 110
P 112
P 115
101.6
104.6
109.6
111.6
114.6
0.85
0.87
0.91
0.92
0.94
P
P
P
P
P
31
31.5
32
34
35
30.7
31.2
31.7
33.7
34.7
0.30
0.31
0.31
0.33
0.34
P 120
P 125
P 130
P 132
P 135
119.6
124.6
129.6
131.6
134.6
0.98
1.01
1.05
1.06
1.09
P 140
P 145
P 150
139.6
144.6
149.6
1.12
1.16
1.19
P
P
P
P
P
35.5
36
38
39
40
35.2
35.7
37.7
38.7
39.7
0.34
0.34
0.37
0.37
0.37
P 150A
P 155
P 160
P 165
P 170
149.5
154.5
159.5
164.5
169.5
1.19
1.23
1.26
1.30
1.33
P
P
P
P
P
41
42
44
45
46
40.7
41.7
43.7
44.7
45.7
0.38
0.39
0.41
0.41
0.42
174.5
179.5
184.5
189.5
194.5
1.37
1.40
1.44
1.48
1.51
P 8
P 9
P 10
P
P
P
P
P
10A
11
11.2
12
12.5
P
P
P
P
P
14
15
16
18
20
2.4
0.09
5.7
3.5
0.10
8.4
0.13
0.15
P 175
P 180
P 185
P 190
P 195
Thickness
W (mm)
8.4
3.1
0.15
0.10
Inner Diameter
d (mm)
Seals
Sizes
5700 Handbook
G
G
G
G
G
100
105
110
115
120
G
G
G
G
G
Thickness
W (mm)
Inner Diameter
d (mm)
JIS
B 2401
Thickness
W (mm)
Inner Diameter
d (mm)
JIS
B 2401
Thickness
W (mm)
Inner Diameter
d (mm)
99.4
104.4
109.4
114.4
119.4
0.85
0.87
0.91
0.94
0.98
G
G
G
G
G
200
205
210
215
220
199.3
204.3
209.3
214.3
219.3
1.55
1.58
1.61
1.64
1.68
G
G
G
G
G
300
305
310
315
320
299.3
304.3
309.3
314.3
319.3
2.20
2.24
2.27
2.30
2.33
125
130
135
140
145
124.4
129.4
134.4
139.4
144.4
1.01
1.05
1.08
1.12
1.16
G
G
G
G
G
225
230
235
240
245
224.3
229.3
234.3
239.3
244.3
1.71
1.73
1.77
1.81
1.84
G
G
G
G
G
325
330
335
340
345
324.3
329.3
334.3
339.3
344.3
2.36
2.39
2.42
2.45
2.48
G
G
G
G
G
150
155
160
165
170
149.3
154.3
159.3
164.3
169.3
1.19
1.23
1.26
1.30
1.33
G
G
G
G
G
250
255
260
265
270
249.3
254.3
259.3
264.3
269.3
1.88
1.91
1.94
1.97
2.01
G
G
G
G
G
350
355
360
365
370
349.3
354.3
359.3
364.3
369.3
2.51
2.54
2.57
2.60
2.63
G
G
G
G
G
175
180
185
190
195
174.3
179.3
184.3
189.3
194.3
1.37
1.40
1.44
1.47
1.51
G
G
G
G
G
275
280
285
290
295
274.3
279.3
284.3
289.3
294.3
2.04
2.07
2.10
2.14
2.17
G
G
G
G
G
375
380
385
390
395
374.3
379.3
384.3
389.3
394.3
2.67
2.70
2.73
2.76
2.79
G 400
399.3
2.82
3.1
5.7
0.10
0.13
5.7
0.13
5.7
0.13
9-22
Seals
Appendix
5700 Handbook
Section X
Appendix
10-1
Seals
Appendix
5700 Handbook
A p p e n d i x
There are a number of factors that can contribute to compression set failure of an O-ring seal. They are listed below.
Figure 10-1 provides an illustration of characteristic compression set. See Table 10-1 for a failure analysis and
corrective action discussion.
10-2
Seals
Appendix
5700 Handbook
Failure Analysis
In general, extrusion and nibbling are caused by one or
more of the following conditions:
1. Excessive clearances.
2. High pressure (in excess of system design or high
pressure excursions).
3. O-ring material too soft.
4. Degradation (swelling, softening, shrinking, cracking, etc.) of O-ring material by system fluid.
5. Irregular clearance gaps caused by eccentricity.
6. Increase in clearance gaps due to excessive system
pressure.
7. Improper machining of O-ring gland (sharp edges).
8. Improper size (too large) O-ring installed causing
excessive filling of groove.
Compression Set
Failure Analysis
In general, Compression Set is caused by one or more
of the following conditions:
1. Selection of O-ring material with inherently poor
compression set properties.
2. Improper gland design.
3. Excessive temperature developed causing the Oring to harden and lose its elastic properties. (High
temperatures may be caused by system fluids, external environmental factors, or frictional heat build-up.)
4. Volume swell of the O-ring due to system fluid.
5. Excessive squeeze due to over tightening of adjustable glands.
6. Incomplete curing (vulcanization) of O-ring material during production.
7. Introduction of fluid incompatible with O-ring material.
Prevention/Correction
Suggested solutions to the causes of Extrusion and
Nibbling listed above are:
1. Decrease clearance by reducing machining tolerances.
2. Use back-up devices. (See Section VI, ParBack
Back-Up Rings, for information on Parker Parbak
anti-extrusion devices.)
3. Check O-ring material compatibility with system
fluid.
4. Increase rigidity of metal components.
5. Replace current O-ring with a harder O-ring.
6. Break sharp edges of gland to a minimum radius
0.002 inches.
7. Insure installation of proper size O-rings.
8. Use alternative seal shape. for example, in some
long stroke piston or rod applications, the Parker
T-Seal, with its built-in back-up rings, may prevent
extrusion and spiral failure.
Prevention/Correction
Suggested solutions to the causes of compression set are:
1. Use Low-Set O-ring material whenever possible.
2. Select O-ring material compatible with intended
service conditions.
3. Reduce system operating temperature.
4. Check frictional heat build-up at seal interface and
reduce if excessive.
5. Inspect incoming O-ring shipments for correct physical properties. (Requesting the Parker C.B.I. number will be of great assistance in this area. For a
complete discussion of this exclusive Parker service, look later in this section.)
Seals
Appendix
5700 Handbook
Failure Analysis
As stated above, spiral failure is generally caused by an
O-ring both sliding and rolling at the same time.
Conditions which may cause this to occur are:
1. Eccentric components.
2. Wide clearance combined with side loads.
3. Uneven surface finishes.
4. Inadequate or improper lubrication.
5. O-ring too soft.
6. Stroke speed (usually too slow).
7. Improper installation (O-ring pinched or rolled).
Prevention/Correction
Suggested solutions to the causes of spiral failure are
as follows:
1. Improve surface finish of sealed assembly at dynamic interface (Cylinder Bore, Piston Rod).
2. Check for out-of-round components (Cylinder Bores
especially).
3. Provide proper lubrication. Consider the use of
internally lubed O-rings.
4. Replace with a harder O-ring.
5. Consider use of alternate seal shapes. for example,
the Parker T-seal is specifically designed to prevent
spiral failure and its use will allow for increased
tolerances because of built-in anti-extrusion backup rings. Parker T-Seals are available to fit a number of standard AS568A O-ring grooves and may
directly interchange with O-rings in most cases.
10.1.1.5 Abrasion
Another rather common type of O-ring failure is abrasion.
This usually is found only in dynamic seals subject either to
reciprocating, oscillating, or rotary motion. Possible causes
of O-ring abrasion are listed in Table 10-5. Figure 10-6
shows wear on an O-ring.
10-4
Seals
Appendix
5700 Handbook
10.1.2.1 Chamfers
To prevent damaging of seals during assembly, chamfers
are necessary on all leading edges. All edges must be free
from burrs and sharp edges bevelled.
Figure 10-7 shows the leading edge chamfer and an O-ring
before deformation. The dimension X should be greater
than dimension Y to ensure a trouble-free assembly operation.
Abrasion
Failure Analysis
In general, abrasion of O-ring seals is caused by one or
more of the following:
1. Improper finish of the surface in dynamic contact
with the O-ring. This surface finish may be too
rough, acting as an abrasive, or too smooth, causing
inadequate lubrication due to inability of surface to
hold lubricant.
2. Improper lubrication provided by system fluid.
3. Excessive temperatures.
4. Contamination of system fluid by abrasive particles.
Failure Analysis
Prevention/Correction
Prevention/Correction
Seals
Appendix
5700 Handbook
Installation Damage
Cleaning material must also be a medium which is compatible with the elastomer. Also grease used to ease assembly
must be compatible.
Failure Analysis
Damage to an O-ring during installation can occur when:
1. There are sharp corners on mating metal components such as the O-ring gland or threads over
which the O-ring must pass during assembly.
2. Insufficient lead-in chamfer.
3. Blind grooves in multi-port valves.
4. Oversize O-ring on piston seal application.
5. Undersize O-ring on rod application.
6. O-ring twisted/pinched during installation.
7. O-ring not properly lubricated before installation.
8. O-ring dirty upon installation.
9. O-ring gland and/or other surfaces over which
O-ring must pass during assembly contaminated
with metal particles.
10. General carelessness.
Prevention/Correction
Probably the best way to prevent damage to O-rings
during installation is the use of good old fashioned
Common Sense. There are some specific solutions
which are listed below:
1. Break all sharp edges on metal components.
2. Provide a 20 lead-in chamfer.
3. Check all components for cleanliness before installation.
4. Tape all threads over which the O-ring will pass.
5. Use an O-ring lubricant such as Parker O-Lube or
Parker Super O-Lube if its use will not contaminate system.
6. Double check O-ring to insure correct size and
material.
7. Be CAREFUL.
Table 10-6: Installation Damage Failure Analysis
15
to 20
15 to 20
X
15
to 20
Y
Z
O-Ring Can Be Sheared
Internal Chamfer
Optimal Solution
Seals
Appendix
5700 Handbook
10.1.2.5 Rolling
Parker Seal also has the capability to analyze seals and their
behavior in proposed applications through Finite Element
Analysis (FEA). FEA is a powerful tool which allows the
designer and the engineer to design complex parts and then
Stamp
Location Aid
Fluid
Pressure
Small Area
Large
Area
Location Aid
O-Ring
Delta-Ring
Square-Ring
X-Ring
All are subject to torsional or spiral failure.
Fitting Back-Stop
Seals
Appendix
5700 Handbook
10-8
Seals
Appendix
5700 Handbook
Aniline Point: The lowest temperature at which equal volumes of pure, fresh aniline and an oil will completely
dissolve in one another is the aniline point of the oil.
Antioxidant: An organic substance which inhibits or retards
oxidation.
Antiozonant: A substance that retards or prevents the appearance of cracks from the action of ozone when the elastomer is exposed under tension, either statically or dynamically, to air containing ozone.
Antirad: A material which inhibits radiation damage.
Atmospheric Cracking: Cracks produced in surface of rubber articles by exposure to atmospheric conditions.
B
Backrind: Distortion at the parting line usually in the form of
a ragged indentation.
Back-Up Ring: (Anti-extrusion device) a ring of relatively
hard and tough material placed in the gland between the
O-ring and groove side walls, to prevent extrusion of the
O-ring.
Bake-Out: A process whereby a vacuum system is heated for
a given time at some predetermined temperature to degas
all the components, i.e. gages, fittings, valves, seals, etc.
Banbury Mixer: A specific type of internal mixer used to
blend fillers and other ingredients with an elastomer.
Bench Test: A modified service test in which the service
conditions are approximated, but the equipment is conventional laboratory equipment and not necessarily identical with that in which the product will be employed.
) Particles: Negatively charged particles or electrons,
Beta (
characterized by limited penetration.
Bleeding: Migration to the surface of plasticizers, waxes, or
similar materials to form a film or beads.
Blemish: A mark, deformity, or injury that impairs the appearance.
Blisters: A raised spot in the surface or a separation between
layers usually forming a void or air-filled space in the
vulcanized article.
Bloom: A dusty or milky looking deposit that sometimes
appears on the surface of an O-ring after molding and
storage, caused by migration of a liquid or solid to the
surface. Not to be confused with dust from external
sources.
Bond: The term commonly used to denote the attachment of
a given elastomer to some other member. Bonds may be
classified by type as follows:
(a) Mechanical Bond purely physical attachment accomplished by such means as through holes interlocking fingers, envelope design, riveting etc.
(b) Cold Bond adhesion of previously vulcanized
elastomer to another member through use of suitable
contact cements.
(c) Vulcanized Bond adhesion of an elastomer to a
previously primed surface using heat and pressure
thus vulcanizing the elastomer at the same time.
10-9
Seals
Appendix
5700 Handbook
10-10
Seals
Appendix
5700 Handbook
Homogeneous: (a) General - a material of uniform composition throughout. (b) In seals - a rubber seal without fabric
or metal reinforcement.
Hypalon: DuPont trade name for chlorosulphonated polyethylene, an elastomer.
I
Identification: Colored dots or stripes on seals for identification purposes. Seldom used today.
Immediate Set: The deformation found by measurement
immediately after removal of the load causing the deformation.
Immersion: Placing an article into a fluid, generally so it is
completely covered.
Impact: The single, instantaneous stroke or contact of a
moving body with another, either moving or at rest, such
as a large lump of material dropping on a conveyor belt.
L
Leakage Rate: The rate at which a fluid (either gas or liquid)
passes a barrier. Total Leakage Rate includes the amounts
that diffuse or permeate through the material of the barrier
as well as the amount that escapes around it.
Life Test: A laboratory procedure used to determine the
amount and duration of resistance of an article to a specific
set of destructive forces or conditions.
Linear Expansion: Expansion in any one linear dimension or
the average of all linear dimensions.
Logy: Sluggish, low snap or recovery of a material.
Low Temperature Flexibility: The ability of a rubber product to be flexed, bent or bowed at low temperatures
without cracking.
M
mm Hg: Millimeters of mercury. In vacuum work, this is a
measure of absolute pressure, being the height of a column
of mercury that the air or other gas will support. Standard
atmospheric pressure will support a mercury column 760
millimeters high (760 mm Hg.) Any value less than this
represents some degree of vacuum.
Memory: Tendency of a material to return to original shape
after deformation.
Mirror Finish: A bright, polished surface.
Mismatch: Unsymmetrical seal caused by dissimilar cavities
in mating mold sections.
Modulus: Tensile stress at a specified elongation. (Usually
100% elongation for elastomers).
Modulus of Elasticity: One of the several measurements of
stiffness or resistance to deformation, but often incorrectly used to indicate specifically static tension modulus.
Mold Cavity: Hollow space or cavity in the mold which is
used to impart the desired form to the product being
molded .
10-11
Seals
Appendix
5700 Handbook
10-12
Seals
Appendix
5700 Handbook
10-13
Seals
Appendix
5700 Handbook
10-14
Seals
Appendix
5700 Handbook
Polyacrylate Rubber
Air Force
Air Force Material Laboratory
Aerospace Material Specification
(1) Army-Navy; (2) Air Force-Navy
Air Force-Navy Aeronautical Bulletin
Air Force-Navy Design
Acceptable Quality Level
Aerospace Recommended Practice
Aerospace Standard
American Society for Testing and Materials
Atmosphere (atmospheric)
Polyurethane Rubber
Butadiene Rubber
Degrees Centigrade
Cubic centimeter
Centimeter-Gram-Second; system of units for
length, mass, and time
Epichlorohydrin Rubber
Cycles per minute
Chloroprene (Neoprene)
Cross Section
Hypalon Rubber
Diameter
Epichlorohydrin Rubber
Ethylene-Propylene Rubber
Ethylene-Propylene Rubber
Polyurethane Rubber
Degrees Fahrenheit
Federal Specification
(also FPM) Fluorocarbon Rubber
Foot-Pound-Second; system of units for length,
weight and time
Fluorosilicone Rubber
Government Rubber Styrene; now SBR
Inside Diameter
Butyl Rubber
Inch
IR
JAN
JIC
K
Max
MIL
Min
MS
MVQ
NAS
NASA
NBR
No
NR
OD
psi
PVMQ
QPL
R or R
Rad
RMA
RMS
rpm
SAE
SBR
sfm
Spec
T
Temp.
USAF
VMQ
W
WPAFB
XNBR
Isoprene Rubber
Joint Army-Navy
Joint Industry Conference on Hydraulic Standards for Industrial Equipment
Degrees Kelvin (Absolute) (C +273)
Maximum
Military Specification
Minimum
Military Standard
Silicone Rubber
National Aerospace Standard (also National
Aircraft Standards [older meaning])
National Aeronautics and Space
Administration
Nitrile or Buna-N Rubber
Number
Natural Rubber
Outside Diameter
Pounds per square inch
Phenyl Silicone Rubber
Military Qualified Products List
Degrees Rankine (Absolute) (F +460)
Radius
Rubber Manufacturers Association
Root-Mean-Square; average value of surface
roughness measured in microinches
Revolutions per minute
Society of Automotive Engineers, Inc.
Styrene Butadiene Rubber
Surface Feet per minute
Specification
Polysulfide Rubber
Temperature
United States Air Force
Silicone Rubber
Width (seal cross section)
Wright-Patterson Air Force Base
Carboxylated Nitrile Rubber
10-15
Seals
Appendix
5700 Handbook
5- Sizes
1. Locate the compound in Table 10-7, and note the shrinkage class listed.
2. Find the standard AN dimensions and tolerances in
Table 9-3. (If the I.D. is not known, refer to Table 9-4
first.)
3. Find the actual I.D. and cross-section by multiplying the
standard I.D. and W. dimensions by the dimension
factor from Table 10-10.
4. Find the I.D. tolerance by multiplying the standard I.D.
by the tolerance factor from Table 10-10 and adding the
result to the standard tolerance.
5. Find the actual cross-section tolerance in Table 10-9.
Example: O-ring Size 5-547, Compound S0355-75
(1) Shrinkage Class III (Table 10-7)
(2) Standard I.D. = 21.564 .100 W. = .139 .004
(3) Actual I.D. = 21.564 X .984 = 21.219
Actual W. = .139 X .984 = .137
(4) I.D. Tolerance = 21.564 X .0036 + .100 = .178
(5) W. Tolerance .005
Actual Dimensions and Tolerance =
21.219" .178" I.D. X .137" .005" W.
Note: Follow the procedure given for the 5-series to find
dimensions and tolerances for special sizes for which
standard shrinkage tooling exists.
10-16
Seals
Appendix
5700 Handbook
Shrinkage
Class
Compound
Number
Shrinkage
Class
Compound
Number
Shrinkage
Class
47-071
N0103-70
G0244-70
C0267-50
N0287-70
N0299-50
N0304-75
S0317-60
S0355-75
C0356-45
S0383-70
N0406-60
S0455-70
S0469-40
V0494-70*
N0497-70
N0506-65
N0507-90
N0508-75
E0515-80
C0518-60
N0525-60
AN
AN
AN
AN
AN
I
AN
I
IV
I
II
AN
V
AN
II
-1
AN
-1
-1
AN
AN
AN
E0540-80
N0545-40
N0552-90
C0557-70
S0595-50
N0602-70
E0603-70
S0604-70
A0607-70
B0612-70
S0613-60
S0614-80
P0642-70
E0652-90
E0667-70
N0674-70
V0680-70*
E0692-75
V0709-90*
E0740-75
N0741-75
V0747-75*
AN
I
-1
AN
II
AN
AN
I
I
I
AN
AN
2
-1
I
AN
II
AN
III
AN
AN
III
E0798-70
E0803-70
C0873-70
V0884-75*
E0893-80
V0894-90*
C0944-70
N0951-75
E0962-90
E1028-70
N1090-85
A1107-70
A1111-70
L1120-70**
C1124-70
L1223-60
L1218-80
L1186-80
V1164-75*
V1226-75*
I
AN
AN
III
AN
II
-1
AN
3
AN
I
I
II
IV
AN
I
I
I
III
III
* Fluorocarbon compounds that have CLASS III shrinkage are manufactured using special compensated molds that will give nominal
dimensions equivalent to the corresponding standard AN size. However, the tolerance spread will be that of a CLASS III shrinkage
material unless otherwise specified.
** Run on Compensated Tooling.
Note: The O-Ring Division is constantly developing new materials to solve customer needs. For the most up-to-date information, contact
the O-Ring Division directly.
10-17
Seals
Appendix
5700 Handbook
Class -1
Tol W
ID
2-001
2-002
2-003
2-004
2-005
2-006
2-007
2-008
2-009
2-010
.029
.042
.056
.070
.102
.115
.146
.177
.209
.240
2-011
2-012
2-013
2-014
2-015
.303
.366
.429
.492
.554
2-016
2-017
2-018
2-019
2-020
.004
.004
.004
.005
.040
.050
.060
.070
Tol
.003
ID
.029
.042
.056
.070
.101
.114
.145
.176
.208
.239
.005
.007
.301
.364
.426
.489
.551
.618
.680
.743
.806
.869
.007
.007
.008
.008
.009
2-021
2-022
2-023
2-024
2-025
.932
.995
1.057
1.121
1.183
2-026
2-027
2-028
2-029
2-030
2-031
2-032
2-033
2-034
2-035
Class AN
Tol W
.004
.004
.004
.005
.040
.050
.060
.070
Tol
.003
ID
.029
.042
.056
.070
.100
.113
.144
.175
.207
.238
Class I
Tol
W
.004
.004
.004
.005
.040
.050
.060
.070
Tol
.004
ID
Class II
Tol W
.029
.042
.055
.069
.100
.113
.143
.174
.206
.236
.004
.004
.004
.005
.005
.006
.005
.007
.299
.362
.423
.486
.548
.005
.006
.006
.008
.298
.360
.421
.484
.545
.006
.006
.008
.614
.676
.739
.801
.864
.009
.009
.009
.009
.009
.610
.672
.735
.796
.859
.010
.010
.010
.010
.010
.607
.669
.731
.792
.854
.010
.011
.011
.011
.011
.009
.010
.010
.010
.011
.926
.989
1.051
1.114
1.176
.009
.010
.010
.010
.011
.920
.983
1.045
1.107
1.169
.010
.011
.011
.011
.012
.916
.978
1.039
1.102
1.163
.011
.012
.013
.013
.014
1.246
1.309
1.372
1.498
1.624
1.749
1.875
2.001
2.127
2.252
.011
.011
.013
.014
.014
.015
.015
.018
.018
.018
1.239
1.301
1.364
1.489
1.614
1.739
1.864
1.989
2.114
2.239
.011
.011
.013
.013
.013
.015
.015
.018
.018
.018
1.232
1.293
1.356
1.480
1.604
1.729
1.853
1.977
2.101
2.226
.012
.013
.015
.015
.015
.017
.017
.020
.021
.021
1.225
1.287
1.349
1.473
1.596
1.720
1.843
1.967
2.091
2.214
.014
.014
.016
.017
.017
.019
.019
.023
.023
.023
2-036
2-037
2-038
2-039
2-040
2.378
2.504
2.630
2.755
2.881
.018
.018
.020
.020
.020
2.364
2.489
2.614
2.739
2.864
.018
.018
.020
.020
.020
2.350
2.474
2.598
2.723
2.847
.021
.021
.023
.023
.023
2.338
2.462
2.585
2.709
2.832
.024
.024
.026
.027
.027
2-041
2-042
2-043
2-044
2-045
3.007
3.258
3.510
3.761
4.013
.024
.024
.024
.027
.027
2.989
3.239
3.489
3.739
3.989
.024
.024
.024
.027
.027
2.971
3.220
3.468
3.717
3.965
.028
.028
.028
.031
.032
2.956
3.203
3.451
3.698
3.945
.031
.032
.032
.036
.037
2-046
2-047
2-048
2-049
2-050
4.264
4.516
4.767
5.019
5.270
.030
.030
.030
.037
.037
4.239
4.489
4.739
4.989
5.239
.030
.030
.030
.037
.037
4.214
4.462
4.711
4.959
5.208
.035
.035
.036
.043
.043
4.192
4.440
4.687
4.934
5.181
.040
.041
.041
.049
.050
070
.003
.070
.003
.070
.004
.040
.049
.059
.069
Tol
.004
.
.
.069
.004
Seals
Appendix
5700 Handbook
Parker
Size
Number
Class III
Tol W
ID
2-001
2-002
2-003
2-004
2-005
2-006
2-007
2-008
2-009
2-010
.029
.041
.055
.069
.099
.112
.143
.173
.205
.235
.004
.004
.004
.005
.005
.005
.006
.006
.006
.006
2-011
2-012
2-013
2-014
2-015
.296
.358
.419
.481
.542
2-016
2-017
2-018
2-019
2-020
.039
.049
.059
.069
Tol
.028
.041
.055
.069
.099
.112
.142
.172
.204
.234
.004
.004
.004
.005
.005
.006
.006
.006
.006
.006
.006
.006
.007
.007
.009
.295
.356
.417
.479
.539
.604
.665
.727
.788
.850
.011
.011
.012
.012
.012
2-021
2-022
2-023
2-024
2-025
.911
.973
1.034
1.096
1.157
2-026
2-027
2-028
2-029
2-030
2-031
2-032
2-033
2-034
2-035
Tol
.004
.004
.004
.005
.006
.006
.006
.006
.006
.006
.004
.006
.007
.007
.007
.010
.293
.355
.415
.476
.537
.601
.662
.723
.784
.846
.012
.012
.013
.013
.013
.012
.014
.014
.014
.015
.907
.968
1.029
1.091
1.151
1.219
1.280
1.342
1.465
1.588
1.711
1.834
1.957
2.080
2.203
.015
.016
.018
.018
.019
.021
.022
.025
.026
.026
2-036
2-037
2-038
2-039
2-040
2.326
2.449
2.572
2.695
2.818
2-041
2-042
2-043
2-044
2-045
2-046
2-047
2-048
2-049
2-050
.007
.007
.008
.008
.010
.292
.353
.413
.474
.534
.007
.008
.008
.009
.011
.598
.658
.720
.780
.842
.013
.013
.013
.014
.014
.595
.655
.716
.776
.837
.013
.014
.014
.015
.015
.013
.015
.015
.015
.017
.902
.963
1.024
1.085
1.145
.015
.016
.016
.017
.018
.897
.958
1.018
1.079
1.140
.016
.017
.018
.018
.019
1.213
1.274
1.335
1.458
1.580
1.702
1.825
1.947
2.070
2.192
.017
.017
.020
.020
.021
.023
.024
.028
.028
.029
1.207
1.267
1.329
1.450
1.572
1.694
1.816
1.937
2.059
2.181
.018
.019
.021
.022
.023
.025
.026
.030
.031
.031
1.201
1.261
1.322
1.443
1.564
1.685
1.806
1.927
2.048
2.170
.020
.020
.023
.024
.025
.028
.028
.032
.033
.034
.027
.027
.029
.030
.030
2.314
2.437
2.559
2.681
2.804
.029
.030
.033
.033
.034
2.303
2.424
2.546
2.668
2.790
.032
.033
.036
.036
.037
2.291
2.412
2.533
2.654
2.775
.035
.036
.039
.040
.041
2.941
3.187
3.433
3.679
3.925
.035
.036
.037
.040
.041
2.926
3.171
3.416
3.660
3.905
.038
.040
.041
.045
.046
2.911
3.155
3.398
3.642
3.885
.042
.043
.045
.049
.051
2.896
3.139
3.381
3.623
3.865
.046
.047
.049
.054
.056
4.171
4.417
4.663
4.909
5.155
.045
.046
.047
.055
.056
4.150
4.395
4.639
4.884
5.129
.050
.052
.053
.061
.062
4.129
4.372
4.616
4.859
5.103
.055
.057
.058
.067
.068
4.108
4.350
4.592
4.834
5.077
.060
.062
.064
.073
.075
.004
.068
.004
ID
.004
.004
.004
.006
.006
.006
.006
.006
.006
.007
.069
.039
.049
.058
.068
Tol
Class VI
Tol W
.028
.041
.054
.068
.098
.110
.141
.171
.202
.232
.004
.039
.049
.059
.069
ID
Class V
Tol
W
.028
.041
.055
.068
.098
.111
.141
.171
.203
.233
.069
.004
ID
Class IV
Tol W
.004
Tol
.039
.048
.058
.068
.004
.068
.004
Seals
Appendix
5700 Handbook
Class -1
Tol W
ID
2-102
2-103
2-104
2-105
2-106
.049
.081
.113
.144
.175
2-107
2-108
2-109
2-110
2-111
.207
.238
.301
.364
.427
2-112
2-113
2-114
2-115
2-116
.490
.552
.616
.678
.741
2-117
2-118
2-119
2-120
2-121
2-122
2-123
2-124
2-125
2-126
.005
.104
Tol
.003
ID
.049
.081
.112
.143
.174
Class AN
Tol W
.005
Tol
.103
.003
ID
.049
.081
.111
.142
.173
.206
.237
.299
.362
.424
.205
.236
.297
.360
.421
.005
.007
.009
.009
.009
.487
.549
.612
.674
.737
.007
.009
.009
.009
.484
.546
.608
.670
.733
.804
.867
.930
.993
1.055
1.119
1.181
1.244
1.307
1.370
.010
.010
.010
.010
.010
.010
.012
.012
.012
.012
.799
.862
.924
.987
1.049
1.112
1.174
1.237
1.299
1.362
.010
.010
.010
.010
.010
.010
.012
.012
.012
.012
2-127
2-128
2-129
2-130
2-131
1.433
1.496
1.558
1.622
1.684
.012
.012
.015
.015
.015
1.424
1.487
1.549
1.612
1.674
2-132
2-133
2-134
2-135
2-136
1.747
1.810
1.873
1.937
1.999
.015
.015
.015
.017
.017
2-137
2-138
2-139
2-140
2-141
2.062
2.125
2.188
2.250
2.314
2-142
2-143
2-144
2-145
2-146
2-147
2-148
2-149
2-150
2-151
2-152
2-153
2-154
2-155
2-156
Class I
Tol
W
.005
.102
Tol
.004
ID
.048
.080
.111
.141
.172
Class II
Tol W
.005
.006
.204
.234
.296
.358
.419
.006
.006
.006
.006
.007
.008
.010
.010
.010
.482
.543
.605
.667
.729
.006
.008
.010
.011
.011
.794
.857
.918
.981
1.043
1.105
1.167
1.230
1.291
1.354
.011
.011
.011
.011
.011
.011
.013
.013
.014
.014
.790
.853
.914
.976
1.037
1.100
1.161
1.223
1.285
1.347
.012
.012
.012
.012
.013
.013
.015
.015
.015
.015
.012
.012
.015
.015
.015
1.415
1.478
1.540
1.602
1.664
.014
.014
.017
.017
.017
1.408
1.471
1.532
1.594
1.656
.015
.016
.019
.019
.019
1.737
1.799
1.862
1.925
1.987
.015
.015
.015
.017
.017
1.727
1.788
1.851
1.913
1.975
.017
.017
.017
.019
.019
1.718
1.779
1.842
1.904
1.965
.019
.019
.019
.022
.022
.017
.017
.017
.017
.020
2.050
2.112
2.175
2.237
2.300
.017
.017
.017
.017
.020
2.038
2.099
2.162
2.224
2.286
.020
.020
.020
.020
.023
2.027
2.089
2.151
2.212
2.275
.022
.022
.022
.022
.026
2.376
2.440
2.502
2.565
2.628
.020
.020
.020
.020
.020
2.362
2.425
2.487
2.550
2.612
.020
.020
.020
.020
.020
2.348
2.410
2.472
2.535
2.596
.023
.023
.023
.023
.023
2.236
2.398
2.460
2.522
2.583
.026
.026
.026
.026
.026
2.691
2.753
2.817
2.879
3.005
3.256
3.508
3.759
4.011
4.262
.022
.022
.022
.022
.024
.024
.024
.028
.028
.030
2.675
2.737
2.800
2.862
2.987
3.237
3.487
3.737
3.987
4.237
.022
.022
.022
.022
.024
.024
.024
.028
.028
.030
2.659
2.721
2.783
2.845
2.969
3.218
3.466
3.715
3.963
4.212
.025
.025
.025
.025
.028
.028
.028
.032
.033
.035
2.646
2.707
2.769
2.831
2.954
3.201
3.449
3.969
3.943
4.190
.028
.029
.029
.029
.031
.032
.032
.037
.038
.040
.104
.003
.103
.003
.102
.004
Tol
.102
.004
.102
.004
Seals
Appendix
5700 Handbook
Class III
Tol W
ID
2-102
2-103
2-104
2-105
2-106
2-107
2-108
2-109
2-110
2-111
.048
.080
.110
.141
.171
.203
.233
.294
.356
.417
.005
.005
.005
.006
.006
.006
.006
.006
.006
.007
2-112
2-113
2-114
2-115
2-116
.479
.540
.602
.663
.725
2-117
2-118
2-119
2-120
2-121
.101
Tol
Class IV
Tol W
.048
.079
.110
.140
.170
.202
.232
.293
.354
.415
.005
.005
.006
.006
.006
.006
.006
.006
.007
.007
.007
.009
.011
.011
.012
.477
.537
.599
.660
.722
.786
.848
.909
.971
1.032
.013
.013
.013
.014
.014
2-122
2-123
2-124
2-125
2-126
1.094
1.155
1.217
1.278
1.340
2-127
2-128
2-129
2-130
2-131
Tol
.004
Class V
Tol
W
.005
.005
.006
.006
.006
.006
.006
.007
.007
.008
.007
.010
.012
.012
.013
.474
.535
.596
.656
.718
.782
.844
.905
.966
1.027
.014
.014
.014
.015
.015
.014
.016
.016
.017
.017
1.089
1.149
1.211
1.272
1.333
1.401
1.463
1.524
1.586
1.647
.017
.017
.021
.021
.021
2-132
2-133
2-134
2-135
2-136
2-137
2-138
2-139
2-140
2-141
1.709
1.770
1.832
1.894
1.955
2.017
2.078
2.140
2.201
2.263
2-142
2-143
2-144
2-145
2-146
Class VI
Tol W
.008
.011
.013
.013
.013
.472
.532
.593
.653
.714
.009
.011
.013
.014
.014
.778
.840
.900
.961
1.022
.015
.015
.016
.016
.016
.774
.835
.895
.956
1.016
.016
.016
.017
.017
.018
.015
.018
.018
.018
.019
1.083
1.143
1.205
1.265
1.327
.017
.019
.019
.020
.020
1.078
1.138
1.199
1.259
1.320
.018
.020
.021
.021
.022
1.394
1.456
1.516
1.578
1.639
.019
.019
.022
.023
.023
1.387
1.448
1.509
1.570
1.630
.021
.021
.024
.025
.025
1.380
1.441
1.501
1.562
1.622
.022
.023
.026
.027
.027
.021
.021
.022
.024
.024
.024
.025
.025
.025
.028
1.701
1.761
1.823
1.885
1.945
2.007
2.068
2.129
2.190
2.252
.023
.024
.024
.026
.027
.027
.027
.027
.028
.031
1.692
1.752
1.814
1.875
1.935
1.997
2.057
2.118
2.179
2.240
.025
.026
.026
.029
.029
.029
.030
.030
.030
.034
1.683
1.743
1.804
1.865
1.925
1.986
2.047
2.108
2.168
2.229
.028
.028
.028
.031
.031
.032
.032
.033
.033
.037
2.324
2.386
2.447
2.509
2.570
.029
.029
.029
.029
.029
2.312
2.374
2.435
2.496
2.557
.031
.032
.032
.032
.033
2.301
2.362
2.422
2.484
2.544
.034
.035
.035
.035
.036
2.289
2.350
2.410
2.471
2.531
.037
.037
.038
.038
.039
2-147
2-148
2-149
2-150
2-151
2.632
2.693
2.755
2.816
2.939
.032
.032
.032
.032
.035
2.619
2.680
2.741
2.802
2.924
.035
.035
.035
.036
.038
2.605
2.666
2.727
2.788
2.909
.038
.038
.039
.039
.042
2.592
2.652
2.713
2.773
2.894
.041
.042
.042
.043
.046
2-152
2-153
2-154
2-155
2-156
3.185
3.431
3.677
3.923
4.169
.036
.037
.041
.042
.045
3.169
3.414
3.659
3.903
4.148
.040
.041
.046
.047
.050
3.153
3.396
3.640
3.883
4.127
.043
.045
.050
.052
.055
3.137
3.379
3.621
3.863
4.106
.047
.049
.055
.057
.061
.004
.100
.005
ID
.005
.006
.006
.006
.006
.006
.007
.007
.008
.008
.101
.100
Tol
.047
.078
.109
.139
.169
.200
.230
.290
.351
.411
.004
.101
ID
.048
.079
.109
.139
.169
.201
.231
.291
.353
.413
.101
.004
ID
.005
Tol
.100
.005
.100
.005
Seals
Appendix
5700 Handbook
Class -1
Tol W
ID
2-157
2-158
2-159
2-160
2-161
4.514
4.765
5.017
5.268
5.520
.030
.030
.035
.035
.035
2-162
2-163
2-164
2-165
2-166
2-167
2-168
2-169
2-170
2-171
5.771
6.023
6.274
6.526
6.777
7.029
7.280
7.532
7.783
8.035
2-172
2-173
2-174
2-175
2-176
.104
Tol
Class AN
Tol W
Class I
Tol
W
Tol
ID
.003
4.460
4.709
4.957
5.206
5.454
.035
.036
.041
.041
.042
.004
4.438
4.685
4.932
5.179
5.427
.041
.041
.047
.048
.048
.035
.035
.040
.040
.040
.040
.045
.045
.045
.045
5.737
5.987
6.237
6.487
6.737
6.987
7.237
7.487
7.737
7.987
.035
.035
.040
.040
.040
.040
.045
.045
.045
.045
5.703
5.951
6.200
6.448
6.697
6.945
7.194
7.442
7.691
7.939
.042
.042
.047
.048
.048
.048
.054
.054
.054
.055
5.674
5.921
6.168
6.416
6.663
6.910
7.157
7.405
7.652
7.899
.049
.049
.055
.056
.056
.057
.062
.063
.064
.064
8.286
8.538
8.789
9.041
8.292
.050
.050
.050
.050
.055
8.237
8.487
8.737
8.987
9.237
.050
.050
.050
.050
.055
8.188
8.436
8.685
8.933
9.182
.060
.060
.060
.061
.066
8.146
8.394
8.641
8.888
9.135
.070
.070
.071
.072
.077
2-177
2-178
2-201
2-202
2-203
9.544
9.795
.172
.235
.298
.055
.055
.005
.005
.005
9.487
9.737
.171
.234
.296
.055
.055
.005
.005
.005
9.430
9.679
.170
.233
.294
.066
.067
.005
.005
.005
9.383
9.630
.169
.231
.293
.078
.078
.005
.006
.006
2-204
2-205
2-206
2-207
2-208
.361
.424
.487
.549
.613
.005
.005
.005
.007
.009
.359
.421
.484
.546
.609
.005
.005
.005
.007
.009
.357
.418
.481
.543
.605
.005
.006
.006
.008
.010
.355
.416
.479
.540
.602
.006
.006
.007
.008
.010
2-209
2-210
2-211
2-212
2-213
2-214
2-215
2-216
2-217
2-218
.675
.738
.801
.864
.927
.990
1.052
1.116
1.178
1.241
.009
.010
.010
.010
.010
.010
.010
.012
.012
.012
.671
.734
.796
.859
.921
.984
1.046
1.109
1.171
1.234
.009
.010
.010
.010
.010
.010
.010
.012
.012
.012
.667
.730
.791
.854
.915
.978
1.040
1.102
1.164
1.227
.010
.011
.011
.011
.011
.011
.011
.013
.013
.013
.664
.726
.787
.850
.911
.973
1.034
1.097
1.158
1.220
.011
.012
.012
.012
.012
.012
.013
.015
.015
.015
2-219
2-220
2-221
2-222
2-223
1.304
1.367
1.430
1.493
1.619
.012
.012
.012
.015
.015
1.296
1.359
1.421
1.484
1.609
.012
.012
.012
.015
.015
1.288
1.351
1.412
1.475
1.599
.014
.014
.014
.017
.017
1.282
1.344
1.405
1.468
1.591
.015
.015
.015
.019
.019
2-224
2-225
2-226
2-227
2-228
1.744
1.870
1.996
2.122
2.247
.015
.018
.018
.018
.020
1.734
1.859
1.984
2.109
2.234
.015
.018
.018
.018
.020
1.724
1.848
1.972
2.096
2.221
.017
.020
.020
.021
.023
1.715
1.839
1.962
2.086
2.209
.019
.022
.023
.023
.025
2-229
2-230
2-231
2-232
2-233
2.373
2.499
2.625
2.750
2.876
.020
.020
.020
.024
.024
2.359
2.484
2.609
2.734
2.859
.020
.020
.020
.024
.024
2.345
2.469
2.593
2.718
2.842
.023
.023
.023
.027
.027
2.333
2.457
2.580
2.704
2.828
.026
.026
.026
.031
.031
.140
.004
.139
.004
.139
.004
.102
ID
.030
.030
.035
.035
.035
.004
.103
Class II
Tol W
Tol
4.487
4.737
4.987
5.237
5.487
.140
.003
ID
.138
.138
.005
.005
Tol
.102
.004
.137
.005
.137
.005
Seals
Appendix
5700 Handbook
Class III
Tol W
ID
2-157
2-158
2-159
2-160
2-161
4.416
4.661
4.907
5.153
5.399
.046
.047
.053
.054
.055
2-162
2-163
2-164
2-165
2-166
2-167
2-168
2-169
2-170
2-171
5.645
5.891
6.137
6.390
6.629
6.875
7.121
7.367
7.613
7.859
2-172
2-173
2-174
2-175
2-176
.101
Tol
Class IV
Tol W
Class V
Tol
W
Tol
ID
.004
4.370
4.614
4.857
5.101
5.344
.057
.058
.065
.066
.068
.005
4.348
4.590
4.832
5.075
5.317
.062
.064
.071
.073
.075
.056
.057
.062
.063
.064
.065
.071
.072
.073
.074
5.617
5.861
6.106
6.351
6.596
6.840
7.085
7.330
7.575
7.819
.063
.064
.070
.071
.072
.074
.080
.081
.082
.083
5.588
5.831
6.075
6.318
6.562
6.805
7.049
7.292
7.536
7.779
.069
.071
.077
.079
.080
.082
.088
.090
.091
.093
5.559
5.801
6.044
6.286
6.528
6.770
7.013
7.255
7.497
7.739
.076
.078
.085
.087
.089
.090
.097
.099
.101
.103
8.105
8.351
8.597
8.843
9.089
.080
.081
.081
.082
.088
8.064
8.309
8.554
8.798
9.043
.090
.091
.092
.093
.099
8.023
8.266
8.510
8.753
8.997
.099
.101
.102
.104
.110
7.982
8.224
8.466
8.708
8.951
.109
.111
.113
.115
.122
2-177
2-178
2-201
2-202
2-203
9.335
9.581
.168
.230
.291
.089
.090
.006
.006
.006
9.288
9.533
.167
.229
.290
.101
.102
.006
.006
.006
9.240
9.484
.167
.228
.288
.112
.113
.006
.006
.007
9.193
9.435
.166
.227
.287
.123
.125
.006
.007
.007
2-204
2-205
2-206
2-207
2-208
.353
.414
.476
.537
.599
.006
.007
.007
.009
.011
.351
.412
.474
.535
.596
.007
.007
.007
.010
.012
.350
.410
.471
.532
.593
.007
.008
.008
.010
.013
.348
.408
.469
.529
.590
.008
.008
.008
.011
.013
2-209
2-210
2-211
2-212
2-213
2-214
2-215
2-216
2-217
2-218
.660
.722
.783
.845
.906
.968
1.029
1.091
1.152
1.214
.011
.013
.013
.013
.013
.014
.014
.016
.016
.016
.657
.719
.779
.841
.902
.963
1.024
1.086
1.146
1.208
.012
.014
.014
.014
.014
.015
.015
.017
.018
.018
.654
.715
.775
.837
.897
.958
1.019
1.080
1.141
1.202
.013
.014
.015
.015
.016
.016
.016
.019
.019
.019
.650
.711
.771
.832
.892
.953
1.014
1.075
1.135
1.196
.014
.015
.016
.016
.017
.017
.018
.020
.020
.021
2-219
2-220
2-221
2-222
2-223
1.275
1.337
1.398
1.460
1.583
.017
.017
.017
.020
.021
1.269
1.330
1.391
1.453
1.575
.018
.019
.019
.022
.023
1.262
1.324
1.384
1.445
1.567
.020
.020
.021
.024
.025
1.256
1.317
1.377
1.438
1.559
.021
.022
.022
.026
.027
2-224
2-225
2-226
2-227
2-228
1.706
1.829
1.952
2.075
2.198
.021
.025
.025
.026
.028
1.698
1.820
1.942
2.065
2.187
.023
.027
.028
.028
.031
1.689
1.811
1.932
2.054
2.176
.025
.029
.030
.031
.033
1.680
1.801
1.922
2.044
2.165
.027
.031
.032
.033
.036
2-229
2-230
2-231
2-232
2-233
2.321
2.444
2.567
2.690
2.813
.028
.029
.029
.034
.034
2.309
2.432
2.554
2.677
2.799
.031
.032
.033
.037
.038
2.298
2.419
2.541
2.663
2.785
.034
.035
.036
.040
.041
2.286
2.407
2.528
2.649
2.770
.037
.038
.039
.044
.045
.137
.005
.136
.006
.136
.006
.100
ID
.052
.053
.059
.060
.061
.005
.101
Class VI
Tol W
Tol
4.393
4.638
4.882
5.127
5.372
.137
.004
ID
.135
.135
.006
.006
Tol
.100
.005
.135
.006
.135
.006
Seals
Appendix
5700 Handbook
Class -1
Tol W
ID
2-234
2-235
2-236
2-237
2-238
3.002
3.128
3.253
3.379
3.505
.024
.024
.024
.024
.024
2-239
2-240
2-241
2-242
2-243
3.631
3.756
3.882
4.008
4.134
2-244
2-245
2-246
2-247
2-248
.140
Tol
.004
ID
Class AN
Tol W
Class I
Tol
W
Tol
ID
.004
2.966
3.090
3.215
3.339
3.463
.028
.028
.028
.028
.028
.005
2.951
3.075
3.198
3.322
3.446
.031
.031
.032
.032
.032
.024
.024
.024
.024
.024
.028
.028
.028
.028
.028
3.609
3.734
3.859
3.984
4.109
.028
.028
.028
.028
.028
3.587
3.712
3.836
3.960
4.084
.032
.032
.033
.033
.033
3.569
3.693
3.817
3.940
4.064
.037
.037
.037
.038
.038
4.259
4.385
4.511
4.637
4.762
.030
.030
.030
.030
.030
4.234
4.359
4.484
4.609
4.734
.030
.030
.030
.030
.030
4.209
4.333
4.457
4.581
4.706
.035
.035
.035
.036
.036
4.187
4.311
4.435
4.558
4.682
.040
.040
.041
.041
.041
2-249
2-250
2-251
2-252
2-253
4.888
5.014
5.140
5.265
5.391
.035
.035
.035
.035
.035
4.859
4.984
5.109
5.234
5.359
.035
.035
.035
.035
.035
4.830
4.954
5.078
5.203
5.327
.041
.041
.041
.041
.041
4.806
4.929
5.053
5.176
5.300
.047
.047
.047
.048
.048
2-254
2-255
2-256
2-257
2-258
2-259
2-260
2-261
2-262
2-263
5.517
5.643
5.768
5.894
6.020
6.271
6.523
6.774
7.026
7.277
.035
.035
.035
.035
.035
.040
.040
.040
.040
.045
5.484
5.609
5.734
5.859
5.984
6.234
6.484
6.734
6.984
7.234
.035
.035
.035
.035
.035
.040
.040
.040
.040
.045
5.451
5.575
5.700
5.824
5.948
6.197
6.445
6.694
6.942
7.191
.042
.042
.042
.042
.042
.047
.048
.048
.048
.054
5.424
5.547
5.671
5.795
5.918
6.165
6.413
6.660
6.907
7.154
.048
.048
.049
.049
.049
.055
.056
.056
.057
.062
2-264
2-265
2-266
2-267
2-268
7.529
7.780
8.032
8.283
8.535
.045
.045
.045
.050
.050
7.484
7.734
7.984
8.234
8.484
.045
.045
.045
.050
.050
7.439
7.688
7.936
8.185
8.433
.054
.054
.055
.060
.060
7.402
7.649
7.896
8.143
8.391
.063
.064
.064
.070
.070
2-269
2-270
2-271
2-272
2-273
8.786
9.038
9.289
9.541
9.792
.050
.050
.055
.055
.055
8.734
8.984
9.234
9.484
9.734
.050
.050
.055
.055
.055
8.682
8.930
9.179
9.427
9.676
.060
.061
.066
.066
.067
8.638
8.885
9.132
9.380
9.627
.071
.072
.077
.078
.078
2-274
2-275
2-276
2-277
2-278
10.044
10.547
11.050
11.553
12.056
.055
.055
.065
.065
.065
9.984
10.484
10.984
11.484
11.984
.055
.055
.065
.065
.065
9.924
10.421
10.918
11.415
11.912
.067
.068
.078
.079
.079
9.874
10.369
10.863
11.358
11.852
.079
.080
.091
.093
.094
2-279
2-280
2-281
2-282
2-283
13.062
14.068
15.074
16.051
17.057
.065
.065
.065
.075
.080
12.984
13.984
14.984
15.955
16.955
.065
.065
.065
.075
.080
12.906
13.900
14.894
15.859
16.853
.081
.082
.083
.095
.100
12.841
13.830
14.819
15.779
16.768
.096
.099
.101
.113
.121
2-284
2-309
2-310
2-311
2-312
18.063
.414
.478
.540
.604
.085
.005
.005
.007
.009
17.955
.412
.475
.537
.600
.085
.005
.005
.007
.009
17.847
.410
.472
.534
.596
.107
.005
.006
.008
.010
17.757
.407
.470
.531
.593
.128
.006
.006
.008
.010
.211
.005
.211
.005
.210
.005
.210
.005
.138
ID
2.984
3.109
3.234
3.359
3.484
.139
Class II
Tol W
Tol
.209
.006
.209
.006
Tol
.137
.005
.208
.007
.208
.007
Seals
Appendix
5700 Handbook
Class III
Tol W
ID
2-234
2-235
2-236
2-237
2-238
2.936
3.059
3.182
3.305
3.428
.035
.035
.036
.036
.037
2-239
2-240
2-241
2-242
2-243
3.551
3.674
3.797
3.920
4.043
2-244
2-245
2-246
2-247
2-248
.137
Tol
.005
ID
Class IV
Tol W
Class V
Tol
W
Tol
ID
.006
2.906
3.028
3.150
3.272
3.393
.042
.043
.043
.044
.045
.006
2.891
3.013
3.134
3.255
3.376
.045
.046
.047
.048
.049
.038
.039
.040
.040
.041
.041
.041
.042
.042
.043
3.533
3.656
3.778
3.900
4.023
.045
.046
.047
.047
.048
3.515
3.637
3.759
3.880
4.002
.050
.050
.051
.052
.053
3.497
3.618
3.739
3.860
3.982
.054
.055
.056
.057
.058
4.166
4.289
4.412
4.535
4.658
.045
.046
.046
.047
.047
4.145
4.267
4.390
4.512
4.635
.050
.051
.052
.052
.053
4.124
4.245
4.367
4.489
4.611
.055
.056
.057
.058
.058
4.103
4.224
4.345
4.466
4.587
.060
.061
.062
.063
.064
2-249
2-250
2-251
2-252
2-253
4.781
4.904
5.027
5.150
5.273
.052
.053
.053
.054
.054
4.757
4.879
5.002
5.124
5.246
.058
.059
.060
.060
.061
4.733
4.854
4.976
5.098
5.220
.064
.065
.066
.066
.067
4.708
4.829
4.951
5.072
5.193
.070
.071
.072
.073
.074
2-254
2-255
2-256
2-257
2-258
2-259
2-260
2-261
2-262
2-263
5.396
5.519
5.642
5.765
5.888
6.134
6.380
6.626
6.872
7.118
.055
.055
.056
.056
.057
.062
.063
.064
.065
.071
5.369
5.491
5.614
5.736
5.858
6.103
6.348
6.593
6.837
7.082
.061
.062
.063
.063
.064
.070
.071
.072
.074
.080
5.341
5.463
5.585
5.707
5.828
6.072
6.315
6.559
6.802
7.046
.068
.069
.069
.070
.071
.077
.079
.080
.082
.088
5.314
5.435
5.556
5.677
5.798
6.041
6.283
6.525
6.767
7.010
.074
.075
.076
.077
.078
.085
.087
.088
.090
.097
2-264
2-265
2-266
2-267
2-268
7.364
7.610
7.856
8.102
8.348
.072
.073
.074
.080
.081
7.327
7.572
7.816
8.061
8.306
.081
.082
.083
.090
.091
7.289
7.533
7.776
8.020
8.263
.090
.091
.093
.099
.101
7.252
7.494
7.736
7.979
8.221
.099
.101
.102
.109
.111
2-269
2-270
2-271
2-272
2-273
8.594
8.840
9.086
9.332
9.578
.081
.082
.088
.089
.090
8.551
8.795
9.040
9.285
9.530
.092
.093
.099
.101
.102
8.507
8.750
8.994
9.237
9.481
.102
.104
.110
.112
.113
8.463
8.705
8.948
9.190
9.432
.113
.115
.121
.123
.125
2-274
2-275
2-276
2-277
2-278
9.824
10.316
10.808
11.300
11.792
.091
.093
.105
.106
.108
9.774
10.264
10.753
11.243
11.732
.103
.105
.118
.120
.123
9.724
10.211
10.698
11.185
11.672
.115
.118
.131
.134
.137
9.674
10.159
10.643
11.128
11.612
.127
.130
.144
.148
.151
2-279
2-280
2-281
2-282
2-283
12.776
13.760
14.744
15.700
16.684
.112
.115
.119
.132
.141
12.711
13.690
14.669
15.620
16.599
.127
.132
.137
.152
.161
12.646
13.620
14.594
15.540
16.514
.143
.149
.155
.171
.182
12.581
13.550
14.519
15.460
16.429
.158
.166
.173
.190
.202
2-284
2-309
2-310
2-311
2-312
17.668
.405
.467
.528
.590
.150
.006
.007
.009
.011
17.578
.403
.465
.526
.587
.171
.007
.007
.010
.012
17.488
.401
.463
.523
.584
.193
.007
.008
.010
.013
17.398
.399
.460
.520
.581
.214
.008
.008
.011
.013
.007
.207
.007
.206
.007
.206
.007
.135
ID
2.921
3.044
3.166
3.288
3.411
.207
.136
Class VI
Tol W
Tol
.205
.008
.205
.008
Tol
.135
.006
.203
.008
.203
.008
Seals
Appendix
5700 Handbook
Class -1
Tol W
ID
2-313
2-314
2-315
2-316
2-317
.666
.729
.792
.855
.917
.009
.010
.010
.010
.010
2-318
2-319
2-320
2-321
2-322
.981
1.043
1.107
1.169
1.232
2-323
2-324
2-325
2-326
2-327
.211
Tol
Class AN
Tol W
.662
.725
.787
.850
.912
.009
.010
.010
.010
.010
.010
.010
.012
.012
.012
.975
1.037
1.100
1.162
1.225
1.295
1.358
1.484
1.610
1.735
.012
.012
.015
.015
.015
2-328
2-329
2-330
2-331
2-332
1.861
1.987
2.113
2.238
2.364
2-333
2-334
2-335
2-336
2-337
2-338
2-339
2-340
2-341
2-342
Tol
.005
Class I
Tol
W
.010
.011
.011
.011
.011
.010
.010
.012
.012
.012
.969
1.031
1.093
1.155
1.218
1.287
1.350
1.475
1.600
1.725
.012
.012
.015
.015
.015
.015
.018
.018
.018
.018
1.850
1.975
2.100
2.225
2.350
2.490
2.616
2.741
2.867
2.993
3.119
3.244
3.370
3.496
3.622
.020
.020
.020
.020
.024
.024
.024
.024
.024
.028
2-343
2-344
2-345
2-346
2-347
3.747
3.873
3.999
4.125
4.250
2-348
2-349
2-350
2-351
2-352
Class II
Tol W
.011
.011
.013
.013
.013
.964
1.026
1.088
1.149
1.212
.012
.012
.015
.015
.015
1.279
1.342
1.466
1.590
1.715
.014
.014
.017
.017
.017
1.273
1.335
1.459
1.582
1.706
.015
.015
.019
.019
.019
.015
.018
.018
.018
.018
1.839
1.963
2.087
2.212
2.336
.017
.020
.021
.021
.021
1.830
1.953
2.077
2.201
2.324
.019
.023
.023
.023
.024
2.475
2.600
2.725
2.850
2.975
3.100
3.225
3.350
3.475
3.600
.020
.020
.020
.020
.024
.024
.024
.024
.024
.028
2.460
2.584
2.709
2.833
2.957
3.081
3.206
3.330
3.454
3.578
.023
.023
.023
.023
.028
.028
.028
.028
.028
.032
2.448
2.571
2.695
2.819
2.942
3.066
3.190
3.313
3.437
3.560
.026
.026
.027
.027
.031
.031
.032
.032
.032
.037
.028
.028
.028
.028
.030
3.725
3.850
3.975
4.100
4.225
.028
.028
.028
.028
.030
3.703
3.827
3.951
4.075
4.200
.032
.033
.033
.033
.035
3.684
3.808
3.931
4.055
4.179
.037
.037
.038
.038
.040
4.376
4.502
4.628
4.753
4.879
.030
.030
.030
.030
.030
4.350
4.475
4.600
4.725
4.850
.030
.030
.030
.030
.030
4.324
4.448
4.572
4.697
4.821
.035
.035
.036
.036
.036
4.302
4.426
4.549
4.673
4.797
.040
.041
.041
.046
.047
2-353
2-354
2-355
2-356
2-357
5.005
5.131
5.256
5.382
5.508
.037
.037
.037
.037
.037
4.975
5.100
5.225
5.350
5.475
.037
.037
.037
.037
.037
4.945
5.069
5.194
5.318
5.442
.043
.043
.043
.043
.044
4.920
5.044
5.168
5.291
5.415
.049
.049
.050
.050
.050
2-358
2-359
2-360
2-361
2-362
5.634
5.759
5.885
6.011
6.262
.037
.037
.037
.037
.040
5.600
5.725
5.850
5.975
6.225
.037
.037
.037
.037
.040
5.566
5.691
5.815
5.939
6.188
.044
.044
.044
.044
.047
5.538
5.662
5.786
5.909
6.157
.050
.051
.051
.051
.055
2-363
2-364
2-365
2-366
2-367
6.514
6.765
7.017
7.268
7.520
.040
.040
.040
.045
.045
6.475
6.725
6.975
7.225
7.475
.040
.040
.040
.045
.045
6.436
6.685
6.933
7.182
7.430
.048
.048
.048
.054
.054
6.404
6.651
6.898
7.146
7.393
.056
.056
.057
.062
.063
.005
.209
.006
ID
.011
.012
.012
.012
.012
.210
.209
Tol
.655
.717
.778
.841
.902
.005
.210
ID
.658
.721
.782
.845
.907
.211
.005
ID
.006
Tol
.208
.007
.208
.007
Seals
Appendix
5700 Handbook
Class III
Tol W
ID
2-313
2-314
2-315
2-316
2-317
.651
.713
.774
.836
.897
.011
.013
.013
.013
.013
2-318
2-319
2-320
2-321
2-322
.959
1.020
1.082
1.143
1.205
2-323
2-324
2-325
2-326
2-327
.207
Tol
Class IV
Tol W
.648
.710
.770
.832
.893
.012
.013
.014
.014
.014
.014
.014
.016
.016
.016
.955
1.015
1.077
1.138
1.199
1.266
1.328
1.451
1.574
1.697
.017
.017
.020
.021
.021
2-328
2-329
2-330
2-331
2-332
1.820
1.943
2.066
2.189
2.312
2-333
2-334
2-335
2-336
2-337
Tol
.007
Class V
Tol
W
.013
.014
.015
.015
.015
.015
.015
.017
.018
.018
.950
1.010
1.071
1.132
1.193
1.260
1.322
1.444
1.566
1.689
.018
.018
.022
.023
.023
.022
.025
.026
.026
.026
1.811
1.934
2.056
2.178
2.301
2.435
2.558
2.681
2.804
2.927
.029
.029
.030
.030
.035
2-338
2-339
2-340
2-341
2-342
2-343
2-344
2-345
2-346
2-347
3.050
3.173
3.296
3.419
3.542
3.665
3.788
3.911
4.034
4.157
2-348
2-349
2-350
2-351
2-352
Class VI
Tol W
.016
.016
.019
.019
.019
.945
1.005
1.066
1.126
1.187
.017
.017
.020
.020
.021
1.254
1.315
1.437
1.558
1.680
.020
.020
.024
.025
.025
1.247
1.308
1.429
1.550
1.672
.021
.022
.026
.027
.027
.024
.027
.028
.029
.029
1.802
1.924
2.045
2.167
2.289
.026
.030
.031
.031
.032
1.793
1.914
2.035
2.156
2.277
.028
.032
.033
.034
.035
2.423
2.545
2.668
2.790
2.913
.032
.032
.033
.034
.038
2.411
2.532
2.654
2.776
2.898
.035
.036
.036
.037
.042
2.398
2.519
2.641
2.762
2.883
.038
.039
.040
.041
.045
.035
.036
.036
.037
.041
.041
.042
.042
.043
.045
3.035
3.157
3.280
3.402
3.524
3.647
3.769
3.892
4.014
4.136
.039
.039
.040
.041
.045
.046
.046
.047
.048
.050
3.019
3.141
3.263
3.385
3.506
3.628
3.750
3.872
3.993
4.115
.043
.043
.044
.045
.050
.050
.051
.052
.053
.055
3.004
3.125
3.246
3.367
3.488
3.610
3.731
3.852
3.973
4.094
.046
.047
.048
.049
.054
.054
.056
.057
.058
.060
4.280
4.403
4.526
4.649
4.772
.046
.046
.047
.047
.047
4.259
4.381
4.503
4.626
4.748
.051
.051
.052
.053
.053
4.237
4.359
4.480
4.602
4.724
.056
.057
.058
.058
.059
4.215
4.336
4.457
4.579
4.700
.061
.062
.063
.064
.065
2-353
2-354
2-355
2-356
2-357
4.895
5.018
5.141
5.264
5.387
.055
.055
.056
.056
.057
4.871
4.993
5.115
5.238
5.360
.061
.061
.062
.063
.063
4.846
4.967
5.089
5.211
5.333
.067
.068
.068
.069
.070
4.821
4.942
5.063
5.184
5.305
.073
.074
.075
.076
.076
2-358
2-359
2-360
2-361
2-362
5.510
5.633
5.756
5.879
6.125
.057
.058
.058
.059
.062
5.482
5.605
5.727
5.850
6.094
.064
.064
.065
.066
.070
5.454
5.576
5.698
5.820
6.063
.071
.071
.072
.073
.077
5.426
5.548
5.669
5.790
6.032
.077
.078
.079
.080
.085
2-363
2-364
2-365
2-366
2-367
6.371
6.617
6.863
7.109
7.355
.063
.064
.065
.071
.072
6.339
6.584
6.829
7.073
7.318
.071
.072
.073
.080
.081
6.307
6.550
6.794
7.037
7.281
.079
.080
.082
.088
.090
6.274
6.517
6.759
7.001
7.243
.087
.088
.090
.097
.099
.007
.205
.008
ID
.014
.015
.016
.016
.017
.206
.205
Tol
.641
.703
.763
.824
.884
.007
.206
ID
.645
.706
.767
.828
.888
.207
.007
ID
.008
Tol
.203
.008
.203
.008
Seals
Appendix
5700 Handbook
Class -1
Tol W
ID
2-368
2-369
2-370
2-371
2-372
7.771
8.023
8.274
8.526
8.777
.045
.045
.050
.050
.050
2-373
2-374
2-375
2-376
2-377
9.029
9.280
9.532
9.783
10.035
2-378
2-379
2-380
2-381
2-382
.211
Tol
Class I
Tol
W
Tol
ID
.005
7.679
7.927
8.176
8.424
8.673
.054
.055
.060
.060
.060
ID
.006
7.640
7.887
8.135
8.382
8.629
.064
.064
.070
.070
.071
.050
.055
.055
.055
.055
8.975
9.225
9.475
9.725
9.975
.050
.055
.055
.055
.055
8.921
9.170
9.418
9.667
9.915
.061
.066
.066
.067
.067
8.876
9.124
9.371
9.618
9.865
.072
.077
.078
.078
.079
10.538
11.041
11.544
12.047
13.053
.060
.060
.065
.065
.065
10.475
10.975
11.475
11.975
12.975
.060
.060
.065
.065
.065
10.412
10.909
11.406
11.903
12.897
.073
.073
.079
.079
.081
10.360
10.854
11.349
11.843
12.832
.085
.086
.093
.094
.096
2-383
2-384
2-385
2-386
2-387
14.059
15.065
16.051
17.057
18.063
.070
.070
.075
.080
.085
13.975
14.975
15.955
16.955
17.955
.070
.070
.075
.080
.085
13.891
14.885
15.859
16.853
17.847
.087
.088
.094
.100
.107
13.821
14.810
15.779
16.768
17.757
.104
.106
.113
.121
.128
2-388
2-389
2-390
2-391
2-392
2-393
19.069
20.075
21.081
22.087
23.078
24.084
.090
.095
.095
.100
.105
.110
18.955
19.955
20.955
21.956
22.940
23.940
.090
.095
.095
.100
.105
.110
18.841
19.835
20.829
21.823
22.802
23.796
.113
.119
.120
.126
.133
.139
18.746
19.731
20.724
21.713
22.688
23.677
.135
.143
.145
.153
.160
.167
2-394
2-395
2-425
2-426
25.090
26.096
4.502
4.628
.115
.120
.033
.033
24.940
25.940
4.475
4.600
.115
.120
.033
.033
24.790
25.784
4.448
4.572
.145
.151
.038
.039
24.666
25.655
4.426
4.549
.175
.182
.044
.044
2-427
2-428
2-429
2-430
2-431
4.753
4.879
5.005
5.131
5.256
.033
.033
.037
.037
.037
4.725
4.850
4.975
5.100
5.225
.033
.033
.037
.037
.037
4.697
4.821
4.945
5.069
5.194
.039
.039
.043
.043
.043
4.673
4.797
4.920
5.044
5.168
.044
.045
.049
.049
.050
2-432
2-433
2-434
2-435
2-436
5.382
5.508
5.634
5.759
5.885
.037
.037
.037
.037
.037
5.350
5.475
5.600
5.725
5.850
.037
.037
.037
.037
.037
5.318
5.442
5.566
5.691
5.815
.043
.044
.044
.044
.044
5.291
5.415
5.538
5.662
5.786
.050
.050
.050
.050
.051
2-437
2-438
2-439
2-440
2-441
6.011
6.262
6.514
6.765
7.017
.037
.040
.040
.040
.040
5.975
6.225
6.475
6.725
6.976
.037
.040
.040
.040
.040
5.939
6.188
6.436
6.685
6.933
.044
.047
.048
.048
.048
5.909
6.157
6.404
6.651
6.898
.051
.055
.056
.056
.057
2-442
2-443
2-444
2-445
2-446
7.268
7.520
7.771
8.023
8.526
.045
.045
.045
.045
.055
7.225
7.475
7.725
7.975
8.475
.045
.045
.045
.045
.055
7.182
7.430
7.679
7.927
8.424
.054
.054
.054
.055
.065
7.146
7.393
7.640
7.887
8.382
.062
.063
.064
.064
.075
2-447
2-448
2-449
2-450
2-451
9.029
9.532
10.035
10.538
11.041
.055
.055
.055
.060
.060
8.975
9.475
9.975
10.475
10.975
.055
.055
.055
.060
.060
8.921
9.418
9.915
10.412
10.909
.066
.066
.067
.073
.073
8.876
9.371
9.865
10.360
10.854
.077
.078
.079
.085
.086
.277
.006
.275
.006
.275
.006
.209
Tol
.045
.045
.050
.050
.050
.006
.210
Class II
Tol W
7.725
7.975
8.225
8.475
8.725
.277
.005
ID
Class AN
Tol W
.273
.273
.007
.007
Tol
.208
.007
.272
.008
.272
.008
Seals
Appendix
5700 Handbook
Class III
Tol W
ID
2-368
2-369
2-370
2-371
2-372
7.601
7.847
8.093
8.339
8.585
.073
.074
.080
.081
.081
2-373
2-374
2-375
2-376
2-377
8.831
9.077
9.323
9.569
9.815
2-378
2-379
2-380
2-381
2-382
.207
Tol
Class IV
Tol W
Class V
Tol
W
Tol
ID
.007
7.524
7.768
8.011
8.255
8.498
.091
.093
.099
.101
.102
.008
7.486
7.728
7.970
8.212
8.455
.101
.102
.109
.111
.133
.082
.088
.089
.090
.091
8.787
9.031
9.276
9.521
9.766
.093
.099
.100
.102
.103
8.742
8.985
9.229
9.472
9.716
.104
.110
.112
.113
.115
8.697
8.939
9.181
9.424
9.666
.115
.121
.123
.125
.127
10.307
10.799
11.291
11.783
12.767
.098
.100
.106
.108
.112
10.255
10.745
11.234
11.724
12.703
.110
.113
.120
.122
.127
10.203
10.690
11.177
11.664
12.638
.123
.126
.134
.137
.143
10.150
10.635
11.119
11.604
12.573
.135
.139
.148
.151
.158
2-383
2-384
2-385
2-386
2-387
13.751
14.735
15.700
16.684
17.668
.120
.124
.132
.141
.150
13.682
14.661
15.620
16.599
17.578
.137
.142
.152
.161
.161
13.612
14.586
15.540
16.514
17.488
.154
.160
.171
.182
.193
13.542
14.511
15.460
16.429
17.398
.171
.178
.190
.202
.214
2-388
2-389
2-390
2-391
2-392
2-393
2-934
2-395
2-425
2-426
18.652
19.636
20.620
21.604
22.573
23.557
24.541
25.525
4.403
4.526
.158
.167
.170
.179
.188
.196
.205
.213
.049
.050
18.557
19.536
20.515
21.494
22.458
23.437
24.416
25.395
4.381
4.503
.181
.191
.196
.205
.215
.225
.235
.244
.051
.055
18.462
19.436
20.410
21.384
22.343
23.318
24.292
25.266
4.359
4.480
.204
.216
.221
.232
.243
.254
.265
.276
.060
.061
18.367
19.336
20.305
21.274
22.229
23.198
24.167
25.136
4.336
4.457
.226
.239
.246
.258
.270
.282
.295
.307
.065
.066
2-427
2-428
2-429
2-430
2-431
4.649
4.772
4.895
5.018
5.141
.050
.050
.055
.055
.056
4.626
4.748
4.871
4.993
5.115
.056
.056
.061
.061
.062
4.602
4.724
4.846
4.967
5.089
.061
.062
.067
.068
.068
4.579
4.700
4.821
4.942
5.063
.067
.068
.073
.074
.075
2-432
2-433
2-434
2-435
2-436
5.264
5.387
5.510
5.633
5.756
.056
.057
.057
.058
.058
5.238
5.360
5.482
5.605
5.727
.063
.063
.064
.064
.065
5.211
5.333
5.454
5.576
5.698
.069
.070
.071
.071
.072
5.184
5.305
5.426
5.548
5.669
.076
.076
.077
.078
.079
2-437
2-438
2-439
2-440
2-441
5.879
6.125
6.371
6.617
6.863
.059
.062
.063
.064
.065
5.850
6.094
6.339
6.584
6.829
.066
.070
.071
.072
.073
5.820
6.063
6.307
6.550
6.794
.073
.077
.079
.080
.082
5.790
6.032
6.274
6.517
6.759
.080
.085
.087
.088
.090
2-442
2-443
2-444
2-445
2-446
7.109
7.355
7.601
7.847
8.339
.071
.072
.073
.074
.086
7.073
7.318
7.563
7.808
8.297
.080
.081
.082
.083
.096
7.037
7.281
7.524
7.768
8.255
.088
.090
.091
.093
.106
7.001
7.243
7.486
7.728
8.212
.097
.099
.101
.102
.116
2-447
2-448
2-449
2-450
2-451
8.831
9.323
9.815
10.307
10.799
.087
.089
.091
.098
.100
8.787
9.276
9.766
10.255
10.745
.098
.100
.103
.110
.113
8.742
9.229
9.716
10.203
10.690
.109
.112
.115
.123
.126
8.697
9.181
9.666
10.150
10.635
.120
.123
.127
.135
.139
.271
.008
.206
.269
.007
.009
.269
.009
.205
ID
.082
.083
.089
.091
.092
.007
.008
.206
Class VI
Tol W
Tol
7.563
7.808
8.052
8.297
8.542
.207
.271
.007
ID
.205
.268
.268
.008
.009
.009
Tol
.203
.008
.203
.266
.008
.009
.266
.009
Seals
Appendix
5700 Handbook
ID
2-452
2-453
2-454
2-455
2-456
11.544
12.047
12.550
13.053
13.556
.060
.060
.060
.060
.070
2-457
2-458
2-459
2-460
2-461
14.059
14.562
15.065
15.568
16.051
2-462
2-463
2-464
2-465
2-466
Class -1
Tol W
Class AN
Tol W
Tol
ID
.006
11.475
11.975
12.475
12.975
13.475
.060
.060
.060
.060
.070
.070
.070
.070
.070
.075
13.975
14.475
14.975
15.475
15.955
16.554
17.057
17.560
18.063
18.566
.075
.080
.085
.085
.085
2-467
2-468
2-469
2-470
2-471
19.069
19.572
20.075
21.081
22.087
2-472
2-473
2-474
2-475
23.078
24.084
25.090
26.096
Parker
Size
Number
ID
Class I
Tol
W
Tol
ID
.006
11.406
11.903
12.400
12.897
13.394
.074
.074
.075
.076
.086
.070
.070
.070
.070
.075
13.891
14.388
14.885
15.382
15.859
16.455
16.955
17.455
17.955
18.455
.075
.080
.085
.085
.085
.090
.090
.095
.095
.100
18.955
19.455
19.955
20.955
21.955
.105
.110
.115
.120
.006
22.940
23.940
24.940
25.940
Tol
ID
.277
.277
Class -1
Tol W
3-901
3-902
3-903
3-904
3-905
.186
.240
.303
.353
.416
.005
.005
.005
.005
.005
.056
.064
.064
.072
.072
3-906
3-907
3-908
3-909
3-910
3-911
3-912
3-913
3-914
3-916
.471
.533
.648
.710
.760
.868
.930
.992
1.053
1.178
.005
.007
.009
.009
.009
.009
.009
.010
.010
.010
3-918
3-920
3-924
3-928
3-932
1.363
1.484
1.730
2.103
2.351
.012
.014
.014
.018
.018
.003
ID
.007
11.349
11.843
12.338
12.832
13.327
.088
.089
.090
.091
.102
.087
.087
.088
.089
.094
13.821
14.316
14.810
15.305
15.779
.104
.105
.106
.107
.113
16.356
16.853
17.350
17.847
18.344
.095
.100
.106
.107
.107
16.274
16.768
17.263
17.757
18.252
.114
.121
.127
.128
.129
.090
.090
.095
.095
.100
18.841
19.338
19.835
20.829
21.823
.113
.113
.119
.120
.126
18.746
19.241
19.735
20.724
21.713
.135
.137
.143
.145
.153
.105
.110
.115
.120
.006
22.802
23.796
24.790
25.784
.133
.139
.145
.151
.007
22.688
23.677
24.666
25.655
.160
.167
.175
.182
Tol
ID
Tol
ID
.275
.275
Class AN
Tol W
.185
.239
.301
.351
.414
.005
.005
.005
.005
.005
.056
.064
.064
.072
.072
.078
.082
.088
.098
.098
.117
.117
.117
.117
.117
.468
.530
.644
.706
.755
.863
.924
.986
1.047
1.171
.005
.007
.009
.009
.009
.009
.009
.010
.010
.010
.117
.119
.119
.119
.119
1.355
1.475
1.720
2.090
2.337
.012
.014
.014
.018
.018
.004
Class II
Tol W
Tol
.003
.273
.273
Class I
Tol
W
.184
.238
.299
.349
.412
.005
.005
.005
.005
.005
.056
.064
.064
.072
.072
.078
.082
.087
.097
.097
.116
.116
.116
.116
.116
.465
.527
.640
.702
.750
.858
.918
.980
1.041
1.164
.006
.008
.010
.010
.010
.010
.010
.011
.011
.011
.116
.118
.118
.118
.118
1.347
1.466
1.710
2.077
2.323
.014
.016
.016
.021
.021
.004
.004
.272
.008
.272
.008
Class II
Tol W
.183
.236
.298
.347
.409
.005
.006
.006
.006
.006
.055
.063
.063
.071
.071
.078
.082
.086
.096
.096
.115
.115
.115
.115
.115
.463
.524
.637
.698
.747
.854
.914
.975
1.035
1.158
.006
.008
.011
.011
.011
.011
.011
.012
.013
.013
.077
.081
.086
.096
.096
.115
.115
.115
.115
.115
.115
.117
.117
.117
.117
1.340
1.459
1.701
2.067
2.311
.015
.018
.018
.023
.024
.115
.117
.117
.117
.117
.005
Tol
Tol
.004
.005
10-30
Seals
Appendix
5700 Handbook
ID
2-452
2-453
2-454
2-455
2-456
11.291
11.783
12.275
12.767
13.259
.101
.103
.105
.107
.119
2-457
2-458
2-459
2-460
2-461
13.751
14.243
14.735
15.227
15.700
2-462
2-463
2-464
2-465
2-466
Class III
Tol W
Class IV
Tol W
Tol
ID
.008
11.234
11.724
12.213
12.703
13.192
.115
.117
.120
.122
.135
.120
.122
.124
.126
.132
13.682
14.171
14.661
15.150
15.620
16.192
16.684
17.176
17.668
18.160
.134
.141
.148
.150
.151
2-467
2-468
2-469
2-470
2-471
18.652
19.144
19.636
20.620
21.604
2-472
2-473
2-474
2-475
22.573
23.557
23.541
25.525
Parker
Size
Number
ID
Class V
Tol
W
Tol
ID
.009
11.177
11.664
12.151
12.638
13.125
.129
.132
.135
.138
.151
.137
.139
.142
.144
.152
13.612
14.099
14.586
15.073
15.540
16.109
16.599
17.088
17.578
18.067
.154
.161
.169
.171
.174
.158
.160
.167
.170
.179
18.557
19.046
19.536
20.515
21.494
.188
.196
.205
.213
.008
22.458
23.437
24.416
25.395
Tol
ID
.271
.271
Class III
Tol W
3-901
3-902
3-903
3-904
3-905
.182
.235
.296
.345
.407
.006
.006
.006
.006
.006
.055
.063
.063
.071
.071
3-906
3-907
3-908
3-909
3-910
3-911
3-912
3-913
3-914
3-916
.461
.522
.634
.695
.743
.849
.909
.970
1.030
1.152
.007
.009
.011
.012
.012
.012
.012
.014
.014
.014
.077
.081
.086
.095
.095
.114
.114
.114
.114
.114
3-918
3-920
3-924
3-928
3-932
1.333
1.451
1.692
2.057
2.300
.017
.019
.020
.026
.026
.114
.116
.116
.116
.116
.004
.004
.005
.005
Class VI
Tol W
Tol
ID
.009
11.119
11.604
12.088
12.573
13.057
.143
.146
.150
.153
.167
.154
.157
.160
.163
.171
13.542
14.026
14.511
14.995
15.460
.170
.174
.181
.181
.190
16.027
16.514
17.001
17.488
17.975
.174
.182
.190
.193
.196
15.945
16.429
16.914
17.398
17.883
.193
.202
.211
.214
.218
.181
.183
.191
.196
.205
18.462
18.949
19.436
20.410
21.384
.204
.207
.215
.221
.232
18.367
18.852
19.336
20.305
21.274
.226
.230
.239
.246
.258
.215
.225
.235
.245
.009
22.344
23.318
24.292
25.266
.243
.254
.265
.276
.009
22.229
23.198
24.167
25.136
.270
.282
.295
.307
Tol
ID
Tol
ID
.269
.269
Class IV
Tol W
.181
.234
.295
.344
.405
.006
.006
.006
.007
.007
.055
.063
.063
.070
.070
.458
.519
.630
.691
.739
.845
.905
.965
1.025
1.146
.007
.010
.012
.012
.013
.013
.013
.015
.015
.016
.076
.080
.085
.095
.095
.114
.114
.114
.114
.114
1.327
1.444
1.684
2.046
2.288
.019
.021
.022
.028
.029
.114
.116
.116
.116
.116
.004
.004
.005
.005
.268
.268
Class V
Tol
W
.180
.233
.293
.342
.403
.006
.006
.007
.007
.007
.055
.062
.062
.070
.070
.456
.516
.627
.688
.735
.841
.900
.960
1.020
1.141
.008
.010
.013
.013
.014
.014
.015
.016
.016
.017
.076
.080
.085
.094
.094
.113
.113
.113
.113
.113
1.320
1.437
1.675
2.036
2.276
.020
.023
.024
.031
.032
.113
.115
.115
.115
.115
.004
.004
.006
.006
Tol
.266
.009
.266
.009
Class VI
Tol W
.179
.232
.292
.340
.401
.006
.007
.007
.008
.008
.054
.063
.062
.070
.070
.453
.514
.624
.684
.732
.836
.895
.955
1.015
1.135
.008
.011
.014
.014
.014
.015
.016
.017
.018
.018
.076
.079
.084
.094
.094
.112
.113
.113
.113
.113
1.313
1.429
1.667
2.025
2.265
.022
.025
.026
.033
.035
.113
.114
.114
.114
.114
Tol
.004
.004
.006
.006
10-31
Seals
Appendix
5700 Handbook
.025
.098
.105
.130
.150
.175
.221
.251
.301
.341
.097
.104
.129
.149
.174
.220
.250
.300
.340
.375
W Cross Section
Range mm.
.63
2.48
2.60
3.30
3.81
4.44
5.61
6.37
7.65
8.66
2.47
2.65
3.29
3.80
4.43
5.60
6.36
7.64
8.65
9.55
AN
+I
.003
.003
.004
.004
.005
.005
.006
.006
.007
.007
.003
.003
.004
.004
.005
.005
.006
.006
.007
.007
.004
.004
.005
.005
.006
.006
.007
.007
.008
.008
AN
+I
.08
.08
.10
.10
.13
.13
.15
.15
.18
.18
.08
.08
.10
.10
.13
.13
.15
.15
.18
.18
.10
.10
.13
.13
.15
.15
.18
.18
.20
.20
.004
.004
.005
.005
.006
.007
.008
.008
.010
.010
.004
.004
.005
.005
.007
.007
.008
.008
.010
.010
+II
+III
millimeters
.10
.10
.13
.13
.15
.18
.20
.20
.25
.25
.10
.10
.13
.13
.18
.18
.20
.20
.25
.25
+IV
+V
+VI
.004
.004
.005
.006
.007
.007
.009
.009
.010
.011
.004
.005
.006
.006
.007
.008
.009
.010
.011
.011
.004
.005
.006
.006
.008
.008
.009
.010
.011
.011
+IV
+V
+VI
.10
.13
.15
.15
.18
.20
.23
.25
.28
.28
.10
.13
.15
.15
.20
.20
.23
.25
.28
.28
.10
.10
.13
.15
.18
.18
.23
.23
.25
.28
Dimension
Factor
Tolerance
Factor
-1
AN
+I
+II
+III
+IV
+V
+VI
1.006
1.000
.994
.989
.984
.979
.974
.969
0
0
.0012
.0024
.0036
.0048
.0060
.0072
10-32
Seals
Appendix
5700 Handbook
.027
.061
.491
.531
.691
.811
.941
1.131
1.401
1.701
2.001
2.301
2.621
2.951
3.291
3.631
.060
.490
.530
.690
.810
.940
1.130
1.400
1.700
2.000
2.300
2.620
2.950
3.290
3.630
4.000
Tol.
(in.)
.004
.005
.006
.007
.008
.009
.010
.012
.014
.016
.018
.020
.022
.024
.026
.028
Inside Dia.
(mm)
.68
1.54
11.70
14.50
17.55
20.60
23.90
28.72
35.58
43.20
50.82
58.44
66.57
74.95
83.58
92.22
1.53
11.69
14.49
17.54
20.59
23.89
28.71
35.57
43.17
50.81
58.43
66.56
74.94
83.57
92.21
101.61
Tol.
(mm)
Inside Dia.
(in.)
.10
.13
.15
.18
.20
.23
.25
.30
.36
.41
.46
.51
.56
.61
.66
.71
4.001
4.621
5.561
6.551
7.561
8.611
9.976
11.401
13.701
16.101
18.601
22.501
28.001
33.701
39.601
45.801
4.620
5.560
6.550
7.560
8.610
9.975
11.400
13.700
16.100
18.600
22.500
28.000
33.700
39.600
45.800
52.000
Tol.
(in.)
Inside Dia.
(mm)
Tol.
(mm)
.76
.89
1.02
1.14
1.27
1.40
1.52
1.78
2.03
2.29
2.54
3.05
3.56
4.06
4.57
5.08
Table 10-11: Tolerances for Special O-Rings with Standard Shrinkage Rates
10-33
Seals
Index
5700 Handbook
Index
A
Abbreviations .................................................................... 10-15
Abrasion ............................................................................. 10-4
Abrasion Resistance .................................................... 2-17
Acids ................................................................................... 3-22
Acrylonitrile-Butadiene (NBR) ............................................ 2-4
Advantages of O-Rings ........................................................ 1-2
Aerospace Technology ........................................................ 3-13
Age Control ........................................................................ 2-24
Aging .................................................................................. 2-23
Air Conditioning ................................................................. 3-12
Compound Specifications For Commonly Used .................. 8-6
Aniline Point Differences ................................................... 2-25
Anti-Extrusion Device Design Hints .................................... 6-2
Applications Summary ....................................................... 3-26
Assembly .............................................................................. 3-6
Assembly Hints ........................................................... 10-5
Automotive ........................................................................... 3-9
B
Back-Up Rings ................................................................... 5-17
Back-Up Ring Materials, Other ..................................... 6-3
Polytetrafluoroethylene (PTFE) Back-Up Rings .......... 6-3
Boss Seals ............................................................................. 4-3
Boss Seals, Tube Fitting .............................................. 4-17
Brake System ...................................................................... 3-10
Break-Out Friction ................................................................ 5-8
Butadiene Rubber (BR) ........................................................ 2-6
Butyl Rubber (IIR) ............................................................... 2-6
C
Carboxylated Nitrile (XNBR) .............................................. 2-5
Chamfers ............................................................................. 10-5
Chemical Processing/Oil Field Technology ....................... 3-14
Chlorobutyl Rubber (CIIR) .................................................. 2-6
Chloroprene Rubber (CR) .................................................... 2-6
Chlorosulfonated Polyethylene (CSM) ................................ 2-7
Cleanliness ............................................................................ 3-6
Cleanliness and Cleaning Materials ................................... 10-6
Coefficient
of Friction .................................................................... 2-21
of Thermal Expansion ................................................. 2-22
Comparison of Common Seal Types .................................... 1-7
Compatibility ........................................................................ 3-3
Compatibility Predicition, Rapid ................................. 2-25
Compound ............................................................................ 2-4
Selection ................................................... 2-10, 2-25, 2-31
Shrinkage Class ......................................................... 10-17
Similarity ..................................................................... 2-31
Specifications for Commonly
Used SAE and ASTM Specifications ............................ 8-6
Compression Set ....................................................... 2-17, 10-2
11-1
Seals
Index
5700 Handbook
G
Gap ....................................................................................... 1-3
Gases-High Pressure ........................................................... 3-22
Gases-Permeabilty .............................................................. 3-21
Gland Dimensions .............................................................. 5-18
Gland Dimensions for
Reciprocating Hydraulic O-Ring Seals ....................... 5-17
Gland Fill .............................................................................. 3-9
Glossary of Seal and Rubber Terms ................................... 10-9
Half Dovetail Grooves ........................................................ 4-16
M
Mechanical Requirements .................................................. 2-31
Metal Non-Extrusion Rings .................................................. 6-3
Methods to Reduce Friction ............................................... 5-11
Micro-Emulsions ................................................................ 3-16
Military Fluid Specification Description .............................. 8-3
Military Rubber Specifications ............................................. 8-4
Modifications for Special Applications .............................. 5-17
Modulus .............................................................................. 2-16
H
Hardness ............................................................................. 2-13
HFA Fluids ......................................................................... 3-16
HFC Fluids ......................................................................... 3-17
HFD Fluids ......................................................................... 3-18
High-Pressure ..................................................................... 5-18
High Frequency Motion or Vibration ................................... 5-7
High Temperature ............................................................... 3-18
High Water Based Fluids .................................................... 3-16
Hydraulic Fluids ................................................................. 3-15
Hydraulic Reciprocating O-Ring Seals ................................ 5-3
Hydrogenated Nitrile (HNBR) ............................................. 2-8
I
inPHorm Seal Design and
Material Selection Software ............................................. 3-24
Inside Diameters, Cross Sections and Tolerances
For Aerospace Applications Series A (ISO 3601-1) ................................................. 9-19
J
Jet Fuels .............................................................................. 3-13
JIS B2401 Sizes .................................................................. 9-21
Joule Effect ......................................................................... 2-21
L
Leak Rate Approximation ................................................... 3-21
Leakage, Small Amounts .................................................... 5-17
Leather Back-Up Rings ........................................................ 6-3
Length of Stroke ................................................................. 5-16
Liquid Rocket Propellants .................................................. 3-13
Locator Table 5-XXX Series .............................................. 9-17
Low Temperature ................................................................ 3-18
Low Temperature Leakage .......................................... 5-17
Lubrication ................................................................. 3-5, 5-18
Lack of Lubrication ..................................................... 5-16
N
National Sanitation Foundation (NSF) ............................... 3-13
Non-Pioneering Design ...................................................... 2-25
Nuclear Technology ............................................................ 3-14
Numbering System ............................................................... 8-2
O
O-Lube .................................................................................. 3-5
O-Ring
Advantages .................................................................... 1-2
Assembly ....................................................................... 3-6
Characteristics ............................................................... 1-3
Cleanliness ..................................................................... 3-6
Definition ....................................................................... 1-2
Failures and Leakage ..................................................... 4-3
How To Order O-Rings and Other Parts ........................ 8-2
International O-Ring Standards ..................................... 8-8
France ........................................................................ 8-9
Germany .................................................................... 8-8
International .............................................................. 8-9
11-2
Seals
Index
5700 Handbook
11-3
Seals
Index
5700 Handbook
T
Tear Resistance ................................................................... 2-16
Temperature ....................................................... 2-28, 3-4, 5-18
Temperature of Operation ........................................... 5-16
Temperature Effects on Dynamic Seals ......................... 5-6
Temperature Extremes ................................................. 3-18
Tensile Strength .................................................................. 2-13
Test Method Variables ........................................................ 2-23
Test Specimens ................................................................... 2-23
Testing
Effects of Environment ................................................ 2-23
Original Physical Properties ........................................ 2-33
Durometer ............................................................ 2-33
Elongation ............................................................ 2-33
Modulus ............................................................... 2-33
Specific Gravity .................................................... 2-33
Tensile Strength .................................................... 2-33
Aged Physical Control ................................................. 2-33
Compression Set ................................................... 2-34
Elongation Change ............................................... 2-34
Hardness Change .................................................. 2-34
Low Temperature Resistance ............................... 2-34
Tensile Strength Change ...................................... 2-34
Volume Change .................................................... 2-34
Tetrafluoroethylene-Propylene (AFLAS) (FEPM) ............. 2-10
Thermal Effects .................................................................. 2-19
Thermal Expansion ...................................................... 2-22
Thermal Expansion, coefficient of .............................. 2-22
Time .................................................................................... 2-29
Toughness ........................................................................... 2-13
Transmission ....................................................................... 3-11
Traversing of Cross Drilled Ports ....................................... 10-6
Tube Fitting Boss Seals
- MS33649 ................................................................... 4-17
- MS33656 ................................................................... 4-18
- MS16412 ................................................................... 4-18
U
Underwriters Laboratories ................................................. 3-23
Uni-Directional Gland ........................................................ 5-19
V
Vacuum
Applications ................................................................ 3-19
Leak Rate ..................................................................... 3-21
Seal Considerations ..................................................... 3-19
Seals .............................................................................. 1-6
Weight Loss ................................................................. 3-19
Volume Change ................................................................... 2-17
W
Water and Steam Resistance ............................................... 3-23
Wear .................................................................................... 5-14
11-4
Seals
Index
Offer of Sale
5700 Handbook
11-5
Seals
Thousands of Answers...
One Little Disc.
Take the guesswork out of seal design and material selection ask for a copy of Parkers
Total inPHorm software. Total inPHorm boasts many enhanced features, including an
expanded media compatibility section and custom sizing capabilities that allow the user to
design application-specific glands and seals. The software automatically cross-references
thousands of part numbers, and recommends materials based on the requirements of MIL,
SAE and other standards. With a few mouse clicks, Total inPHorm takes the seal designer
from concept to completion. In addition to the popular O-Ring package, Total inPHorm
contains four other standalone packages for hydraulic and pneumatic sealing applications,
static face sealing, standard composite seal products and EMI shielding and thermal
management.
For more information, or to order a free copy of Total inPHorm, call 1-800-C-PARKER.
Seals