Professional Documents
Culture Documents
In general, loading for a coplanar structure will consist of a normal force N, shear force V, and bending moment M .* It should be realized, however, that these loadings actually represent the resultants of the stress distribution acting over the members cross -sectional area at the cut section.
Sign Convention
Lectures_W3_2 Page 1
Lectures_W3_2 Page 2
Draw the shear and moment diagrams for the frame shown in Figure. Assume A is a pin, C is a roller, and B is a fixed joint.
Lectures_W3_2 Page 3
Lectures_W3_2 Page 4
Lectures_W3_2 Page 5
Lectures_W3_2 Page 6