Electrical Specifications Frequency Range 824 - 960 MHz Gain 18 dBi Return Loss > 15 dB Polarization Dual Slant 45 Horizontal Beamwidth 65 Vertical Beamwidth 7 with nullfill Electrical Downtilt 0 - 10 independently continously adjustable Upper Sidelobe Level < -18 dB Isolation Between Ports > 30 dB Front to Back Ratio > 25 dB Power Rating 500W Intermodulation < -150 dBc (2 x 43 dBm) Impedance 50 ohm Lightning Protection DC grounded Connector Type 7-16 DIN female RET type Internal motor & manual override RET Interface AISG1 Remotely upgradeable RET Connector Single AISG1 8 pin male Mechanical Specifications Antenna Dimensions 2630x300x110 mm Antenna Weight 23 kg Packed Dimensions 2760x330x200 mm Radome Material Polyester Fibreglass pultrusion Maximum Environmental Ratings Rated Wind Velocity 200 km/h Humidity 95% RH @ +30C Rain 140 mm per hour Lateral Loading (Front) 1.04 kN @ 160 km/h Lateral Loading (Rear) 1.13 kN @ 160 km/h Temperature -40C to +70C Mounting Options T-029-GL-E Adjustable clamps F-042-GL-E Fixed clamps HC-10 3-Sector Head-Frame HC-10-P 3-Sector Head-Frame Azimuth Elevation Last Updated: 16-02-2007