Professional Documents
Culture Documents
Release Notes: 3com Switch 5500 Family
Release Notes: 3com Switch 5500 Family
Switch 5500 Family Known Issues for Switch 5500 Family Release v3.02.00 7
Release Notes Software Version 3.02.00 Multiple Spanning Tree (MSTP)
3.7 Multiple Spanning Tree (MSTP)
Users are allowed to configure the reserved Fabric VLAN (VLAN 4094) into an
MSTP Instance; however, MSTP will not change the status of the VLAN.
3.8 Port Security
Learned entries should be cleaned up after a shutdown command is issued on
port.
3.9 Protocol VLAN
Protocol VLANs cannot identify AppleTalk packets.
3.10 Remote Port Mirroring
On the Switch 5500-EI and -SI, the gigabit port cannot be set as a port
mirroring reflector port.
On the Switch 5500 products, MAC address learning does not support VLAN
based learning modes on inbound or outbound traffic. Because of this, remote
bi-direction mirrored traffic does not pass through the relay switch.
3.11 TACACS+
TACACS+ Real-Time Accounting does not work for Telnet, SSH and SFTP
clients, however, it is supported for PPP sessions.
3.12 Upgrade
Members in a cluster cannot be upgraded while a software upgrade is in
progress.
3.13 Stacking
Switch 5500s that have never been added to a stack may report cascade port
errors. This will be addressed in an upcoming 3Com Network Director Service
Pack.
3.14 Web Interface
The Time zone for the system time clock cannot be changed via the web
interface. It can, however, be changed through the Command Line Interface.
8 Upgrading Software 3Com