1) The document provides instructions for accurately measuring bangle size by using the printed measurement guide and ensuring the print size is correct.
2) It describes selecting an existing bangle that fits properly and matching its inside edge to the closest circle size shown to determine the measurement in sixteenths of an inch.
3) Additional tips are given that the bangle should slide comfortably on the hand and to avoid using string or paper for measuring, as these can yield inaccurate results.
1) The document provides instructions for accurately measuring bangle size by using the printed measurement guide and ensuring the print size is correct.
2) It describes selecting an existing bangle that fits properly and matching its inside edge to the closest circle size shown to determine the measurement in sixteenths of an inch.
3) Additional tips are given that the bangle should slide comfortably on the hand and to avoid using string or paper for measuring, as these can yield inaccurate results.
1) The document provides instructions for accurately measuring bangle size by using the printed measurement guide and ensuring the print size is correct.
2) It describes selecting an existing bangle that fits properly and matching its inside edge to the closest circle size shown to determine the measurement in sixteenths of an inch.
3) Additional tips are given that the bangle should slide comfortably on the hand and to avoid using string or paper for measuring, as these can yield inaccurate results.
1 in 0 0 30 mm 0 10 20 1. Bangle measurements are very precise. Carefully follow these instructions to obtain an accurate measurement. 2. Prior to printing, ensure that Page Scaling is set to None on your print dialog box. (To open the print dialog box, press CTRL+P.) 3. Measure the bar on the left. It must be exactly 1 inch or 30 mm long. Alternately, place a ` 1/- coin where indicated. The coin should fit completely over the image so that all lines are covered, without the coin hanging over any edges. For Assistance Please Call: 1800 425 1869 Or E-Mail: shoponline@ckcsons.com MEASURE CURRENT BANGLE 1. Select a bangle that properly slides your hand. 2. Place the bangle over the circles below, matching the inside edge of the bangle to the circle nearest in size. This measurement refers to the inside diameter of the bangle. 3. If the bangle falls between two sizes, order the larger size. MEAS UREMENT S MAT C H T HE I NS I DE EDGE OF T HE BANGL E Inside Diameter BANGLE SIZE 2 2 /16 2.125 Inches 2 3 /16 2.1875 Inches 2 4 /16 2.25 Inches 2 5 /16 2.3125 Inches 2 6 /16 2.375 Inches 2 7 /16 2.4375 Inches For Assistance Please Call: 1800 425 1869 Or E-Mail: shoponline@ckcsons.com BANGLE SIZE MEASURING YOUR BANGLE SIZE Your bangle should slide throught your hand comfortably; snug enough so that it will not fall off, but loose enough to slide over your wrist. Avoid using string or paper to measure bangle size as these materials can stretch or twist, yielding an inaccurate measurement. 2 8 /16 2.50 Inches 2 9 /16 2.5625 Inches 2 10 /16 2.625 Inches 2 11 /16 2.6875 Inches 2 12 /16 2.75 Inches