Professional Documents
Culture Documents
increasing its moisture carrying capacity, which is used for regeneration. In this type of
dryer incoming wet air is divided in a distributor. 60-70% of wet air goes for drying while
30-40% of wet air is circulated through a heater thereby increasing its temparature
which then takes out the moisture from desiccant bed and then it is cooled in an after
cooler where moisture is condensed and drained out in moisture separator. This air is
sent back to the distributor where it mixed with incoming air and distributed again.
• No purge loss.
• ADP Better Than (-) 40 Deg C
• Lubricated Air can be dried
• Most economical in the range from 400 CFM onwards
Description/Specification
The TDF range of high capacity compressed air dryers from FRIULAIR cover flow rates
from 80.000 Nl/min to 200.000 Nl/min.
The main characteristics are:
1. Compact;
2. Clear layout of internal components for ease of maintenance;
3. Robust powder coated galvanized casings with easy access.
Salient features:
Application :
Optional model
• GMP model
Limiting Factor