The document outlines the contents of a study on soil improvement. Chapter 1 provides an introduction. Chapter 2 discusses the need for soil stabilization techniques. Chapter 3 describes the California Bearing Ratio method for designing pavements and factors that affect the ratio. Chapter 4 details the methodology used for testing, including sampling, physical properties testing, and geotechnical properties testing. Chapter 5 presents and discusses the results of testing physical properties, geotechnical properties, and properties after adding sand to the soil.
Original Description:
Effect of sand on the CBR behaviour of fine grained soils
The document outlines the contents of a study on soil improvement. Chapter 1 provides an introduction. Chapter 2 discusses the need for soil stabilization techniques. Chapter 3 describes the California Bearing Ratio method for designing pavements and factors that affect the ratio. Chapter 4 details the methodology used for testing, including sampling, physical properties testing, and geotechnical properties testing. Chapter 5 presents and discusses the results of testing physical properties, geotechnical properties, and properties after adding sand to the soil.
Copyright:
Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOC, PDF, TXT or read online from Scribd
The document outlines the contents of a study on soil improvement. Chapter 1 provides an introduction. Chapter 2 discusses the need for soil stabilization techniques. Chapter 3 describes the California Bearing Ratio method for designing pavements and factors that affect the ratio. Chapter 4 details the methodology used for testing, including sampling, physical properties testing, and geotechnical properties testing. Chapter 5 presents and discusses the results of testing physical properties, geotechnical properties, and properties after adding sand to the soil.
Copyright:
Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOC, PDF, TXT or read online from Scribd
1.1 General 1 1.2 Introduction 1 1.3 Aim of the study 2
Chapter 2 Soil Improvement 3–7
2.1 General 3 2.2 Need for the stabilization of earth roads 3 2.3 Techniques of soil improvement 4
Chapter 3 California Bearing Ratio 8–12
3.1 General 8 3.2 California Bearing Ratio 8 3.3 Design of pavements using CBR method of design 9 3.4 Factors affecting CBR 11 3.5 Limitations of CBR method of design of pavements 11
Chapter 4 Testing Methodology 13–26
4.1 General 13 4.2 Sampling details 13 4.3 Testing methodology 14 4.4 Physical Properties 15 4.5 Geotechnical Properties 21 4.6 Compaction Characteristics of the soil mixture 25 4.7 CBR values of the soil mixture 26 4.8 Direct Shear Test values 26
DEPARTMENT OF CIVIL ENGINEERING
Chapter 5 Results and Discussions 27–66 5.1 General 27 5.2 Physical properties 27 5.3 Geotechnical properties 32 5.4 Properties of the soil after the addition of sand 37 5.5 Inferences drawn 63 5.6 Summary of results 65