Professional Documents
Culture Documents
Contents
Software Download ................................................................................................................................ 1
Main software installation ...................................................................................................................... 1
Configure Licence Server ........................................................................................................................ 6
Install the Helpfiles ................................................................................................................................. 7
Update the Software............................................................................................................................... 8
HW11.0.401-HyperCrash-38 ............................................................................................................... 8
AcuSolve-V1.8a ................................................................................................................................... 9
Perl first ........................................................................................................................................ 9
Software Download
If you need to download the installation package or want to check for updates please register at:
http://www.altairhyperworks.com/clientcenterhwloginform.aspx?from_page=HWProductDownload
.aspx
(You only have to provide your details, and a valid e-mail, there is no need for customer or licence
number)
HW11.0.401-HyperCrash-38
Start the installation as usual.
You will get a warning to backup the installation. If you have changed any files in the installation
directory, please do a backup first. Otherwise proceed with the installation.
AcuSolve-V1.8a
Perl first
If you want to use AcuSolve, you need to install ActivePerl first. You can download the newest
version at http://www.activestate.com/activeperl/downloads
After Perl is installed on your system, you may start the installation as usual, follow the instructions.
Be aware that you MUST choose an installation directory WITHOUT SPACES. Therefore you should
accept the default values. Changing to Program Files does not work.
After the installation you will probably see the following window to choose the Hyperworks
installation directory. After you click OK you get an error message.
Now please run a command prompt as administrator and navigate to the ACUSIM installation
directory. CD down to bin and start the command: acuSetHW.bat.
Make sure the installation path points to the Altair Hyperworks 11 installation and click OK.
All done..