You are on page 1of 1

Product Data Sheet: NeoCryl B-805

Typical properties
Film properties
Recommendation for end-use
Formulating guidelines
Safety
NeoCryl B-805 is a solid methacrylic copolymer with
good solvent solubility and good chemical resistances
for use in coatings, lacquers and inks.
Type
Appearance
Total solids (% w/w)
Average mol.weight (Mw)
Acid value (mg/KOH)
Tg (DSC; C)
Softening point (Ring & Ball; C)
Viscosity Brookfield (25C; mPa.s)
Density (20C; kg/l)
MMA/BMA copolymer
white, free flowing beads
min. 98
85,000
<1
99
190
80 (25% w/w in MEK)
1.16
-
-
-
-
-
Clear, hard and tough
Plasticizer resistant
Adhesion to plastics such as PS, ABS, PVC etc.
Alcohol and petrol resistant
Low residual odour
-
-
-
Plastic coatings (e.g. consumer electronics and automotive interior)
Vinyl coatings
Gravure and screen printing inks
-
-
-
-
NeoCryl B-805 is easily soluble in esters, ketones and aromatics
Compatible with plasticizers, vinyl, NC, CAB, chlorinated rubber and other acrylics such as NeoCryl B-811
For fastest solubility we recommend to start with a 40/60 resin/solvent ratio
See our guide formulations for specific information
All relevant data have been brought up-to-date in the Material Safety Data Sheet for NeoCryl B-805.
NeoCryl B-805
July 2001 Intro Date :
July 16,2005 Print date :
Rev. Date : January 27,2003
Sluisweg 12 P.O. Box 123 5140 AC Waalwijk The Netherlands Telephone +31 (0)416 68 99 11 Telefax +31 (0)416 68 99 22 Internet www.dsmneoresins.com
The information and recommendations in this publication are to the best of our knowledge, information and belief accurate at the date of publication. Nothing herein is to be construed as a warranty, express or otherwise. In all
cases,
it is the responsibility of the users to determine the applicability of such information or suitability of any products for their own purposes. Statements or suggestions concerning possible use of our products are made without
representation or warranty that any such is free of patent infringement and are not recommendations to infringe on any patent. All sales of these products shall be subject to DSM NeoResins standard conditions of sales.
DSM NeoResins
DSM NeoResins B.V.

You might also like