SERIES 60 SERVICE MANUAL: CRANKSHAFT OIL SEALS All information subject to change without notice. Removing the oil sleeve is easy with the crankshaft oil seal remover, J 37075-A. Remove the seal using a variable speed drill motor and 5 / 32" bit.
SERIES 60 SERVICE MANUAL: CRANKSHAFT OIL SEALS All information subject to change without notice. Removing the oil sleeve is easy with the crankshaft oil seal remover, J 37075-A. Remove the seal using a variable speed drill motor and 5 / 32" bit.
SERIES 60 SERVICE MANUAL: CRANKSHAFT OIL SEALS All information subject to change without notice. Removing the oil sleeve is easy with the crankshaft oil seal remover, J 37075-A. Remove the seal using a variable speed drill motor and 5 / 32" bit.
6SE483 9610 1996 DETROIT DIESEL CORPORATION From Bulletin 6-60-98 1-151 7. Remove oil sleeve using crank oil sleeve remover, J 37075A. See Figure 1-123. Figure 1-123 Oil Seal Sleeve Removal Tool for the Federal Mogul Seal [a] Install hardened steel sleeve removal tool into flywheel housing bore. Using socket and breaker bar, rotate tool in three different locations, 2, 4, and 8 o'clock positions, to score the sleeve until the sleeve stretches sufficiently so it can be slipped off the end of the crankshaft. [b] Crocus cloth may be used to clean up the high spots from the surface of the crankshaft. Clean the crankshaft contact surface thoroughly. 1.8 CRANKSHAFT OIL SEALS All information subject to change without notice. 1-152 From Bulletin 6-60-98 6SE483 9610 1996 DETROIT DIESEL CORPORATION Remove the Chicago Rawhide seal as follows: Chicago Rawhideis a registered trademark of CR Industries. 1. Install puller, J 41329, over crankshaft and hold against seal. See Figure 1-124. Figure 1-124 Removing Front Crankshaft Oil Seal from Gear Case Cover 2. Using variable speed drill motor and 5/ 32 bit, drill through outer and inner case of seal using smallest hole A as a guide. 3. Without moving J 41329, drill two additional A holes equally spaced. NOTE: All six holes may be drilled if using three holes proves unsuccessful in pulling seal.