Detailed Product notes of the Pacific Helmets F10 MkIII Firefighters Helmet.
Note: Exact specification will vary depending on required standard and specifications set by the purchasing customer.
Detailed Product notes of the Pacific Helmets F10 MkIII Firefighters Helmet.
Note: Exact specification will vary depending on required standard and specifications set by the purchasing customer.
Detailed Product notes of the Pacific Helmets F10 MkIII Firefighters Helmet.
Note: Exact specification will vary depending on required standard and specifications set by the purchasing customer.
sales@pacifchelmets.com www.pacifchelmets.com PACIFIC F10 MkIII Product Information Pacifc Helmets (NZ) Ltd International Enquiries: sales@pacifchelmets.com Australian Enquiries: sales@pacfre.com.au Safety without Compromise www.pacifchelmets.com Pacifc F10 MkIII Product Submission Notes sales@pacifchelmets.com www.pacifchelmets.com F10 MkIII | Overview 1.0 PACIFIC 1.1 PACIFIC F10 MKIII The Pacfc F10 MkIII offers the very latest in helmet design and technology. The F10 MkIII embodies Pacfcs core design philosophies of safety, quality, and comfort, resulting in a structural frefghting helmet that exceeds all others. Design features include internal bubble face shield and unique One-Touch eye protector. Accentuated shell lines provide improved shock absorption and structural rigidity. The Pacifc F10 MkIII is the ideal helmet for protection in the most extreme conditions. 1.2 CERTIFICATION The F10 MkIII is certifed to all major international Standards. Certifcates available on request. 1.3 QUALITY MANAGEMENT SYSTEM Pacifc Helmets (NZ) Ltd. is an ISO 9001: 2008 certifed manufacturer. MODEL STANDARDS AS/NZS 4067:2012 EN 443:2008 EN14458:2004 NFPA 1971:2013 NFPA 1951:2013 F10 MkIII Yes Yes (Type B) Yes Yes Yes Pacifc F10 MkIII Product Submission Notes sales@pacifchelmets.com www.pacifchelmets.com F10 MkIII | Key Features 2.0 PACIFIC 2.7 KEVLAR & FIBREGLASS REINFORCED COMPOSITE SHELL Continuous kevlar flaments provide integral strength; the helmet will not tear nor shatter on impact. Excellent shock impact and penetration protection 20% lighter than thermoplastic Excellent heat resistance Flame retardant Chemical resistant UV resistant smooth high-gloss paint fnish Extensive colour selection Superior ear and neck protection 2.1 ACCENTUATED LONGITUDINAL CREST Provides improved top impact protection 2.2 EASI ON/OFF TORCH BASE (PAIR) PHNZ Easi Glide Torch CLip. Stand alone, or with BA clip combo (2.11) vvExcellent heat resistance Provides 360 o torch rotation Patented design 2.3 EXTRUSION Flame retardant Heat resistant 2.4 NECK PROTECTOR Double layer protection Flame retardant (Nomex) Aluminised PBI and Proban material available Multiple customised designs available Moisture barrier available 2.5 CHINSTRAP 3 or 4 point design for excellent retention Flame retardant Nomex/Kevlar webbing Leather cheek comfort pads Easy adjustment for all head sizes Quick Release functionality Heat resistant 2.6 INTERNAL BUBBLE FACE SHIELD Clear fame Retardant Polycarbonate Mirror coated face shield available Anti scratch, anti fog Full face protection High impact and chemically resistant Excellent light transmittance Optically correct Certifed to EN 14458:2004 Pacifc F10 MkIII Product Submission Notes sales@pacifchelmets.com www.pacifchelmets.com 2.0 F10 MkIII | Key Features Letters Numbers Symbols Refective Logos Badges 2.8 REFLECTIVE TRIM Refective trim available in various materials Customised designs available High retrorefectivity 2.9 FRONT CREST (OPTIONAL) Metal 3D Badge Available with black or gold (metal appearance) Vinyl crests available under a protective clear coat 2.10 INTERNAL ONE-TOUCH EYE PROTECTOR Clear fame retardant polycarbonate One touch deploy and stow Adjustable wearing height Excellent impact resistance Easily operated with gloved hands Manually operated pull-down version available Anti scratch Excellent light transmittance Optically correct Certifed to EN 166:2001 2.11 BA MASK CLIPS (OPTIONAL) Combination BA clip and Torch Base Adjustable for maximum leak tightness Standard models ftted with Torch Base only 2.12 ADDITIONAL CUSTOMISED TRIM Available under clear coat for increased wear resistance 2.13 LIGHTWEIGHT Weight < 1.5 Kg (confguration dependant) 2.14 REAR HANGER (OPTIONAL) 2.15 LINER Full cranium protection polyurethane liner Superior shock impact absorbtion Excellent thermal barrier Secure click-in 6 point ribbon cradle harness Fully modular harness for easy cleaning/ decontamination and replacement Leather reinforced Mesh crown piece for maximum comfort and ventilation Merino or Leather Front and Rear comfort pads Height & tilt wearing adjustment Ratchet adjustable sizing: 52 64cm (further size adjustment kits available) Pacifc F10 MkIII Product Submission Notes sales@pacifchelmets.com www.pacifchelmets.com 4.1 SHELLS Covered by 6-year warranty. 4.2 EAR FLAPS/NECK PROTECTORS 1 Year warranty. We recommend they be replaced after a maximum of 50 wash cycles 4.3 FACE SHIELD/EYE PROTECTORS 2-year warranty. Replace once scratched or deformed by heat, smoke or other pollutants. 4.4 COMPONENTS 2-year warranty (except neck protectors) 4.4 GENERAL STEPS: All externally manufactured complete accessories shall be covered by the relevant manufacturers warranty. These products are not covered by Pacifc Helmets warranty. Copies of the relevant manufacturers warranties are available on request. (I.e. Torches & Radio Communication Sets) These warranties cover only faulty materials or workmanship and exclude fair wear and tear, of which the Manufacturer (or his agent) shall be the sole arbiter. Many frefghting, or rescue operations including training or simply careless use can result in damage to the equipment, which is not covered by the warranty. The above warranty time limits do not imply any form of helmet life expectancy. These time frames simply place reasonable limits on the discovery of faulty materials and allow these to be dealt with. Reinforced Kevlar composite helmet shells and most other subcomponents can be expected in normal operating circumstances to have a useable life expectancy in excess of 15 years. It is recommended staff involved in hot fre training should wear their helmets with aluminized hoods over the shells when engaged in these activities. Use the thumb to push the lower edge of the eye protector upward gently. A clicking sound can be heard and the eye protector will descend gradually from up position automatically; To stow, use the thumb again and push the eye protectorback up gently; Stop pushing when the same clicking sound is heard again. The eye protector is now locked in place. To adjust eye protector height 3.0 F10 MkIII Supplementary Information 4.0 Warranty Information 5.0 One-Touch Eye Protector 3.1 SPARE PARTS All major components available as spare parts Easily changed without specialist tools Guaranteed supply of spare parts for 10 years from date of contract 3.2 COLOUR RANGE Pacifc Helmets has an extensive range of shell colours Unique Pantone colours can be matched on request Operational Instructions for One-Touch Eye Protector Pacifc F10 MkIII Product Submission Notes sales@pacifchelmets.com www.pacifchelmets.com F10 MkIII | Key Features The Pacifc F10 MkIII is certifed to all major international standards. While all the standards have similar requirements, there are some stipulations that are specifc to each standard. STANDARDS AS/NZS 4067:2012 EN 443:2008 NFPA 1971:2013 F10 MkIII YES YES (Type B) YES SPECIFICATIONS Kevlar Reinforced Composite Shell S S S Hi-gloss paint fnish S S S Structural Liner S S S Suspension system (ribbon/mesh cradle) S S S Ratchet adjustable headband (52-64cm) S S S Internal bubble face shield S S S Internal One-Touch eye protector S S S 3-pt fame retardant chinstrap S S S Flame retardant neck protector S S S Refective trim S P S Pacifc Easi On/Off Base P P P BA Clips P P P Crest / Decals P P P Rear Hanger P P P S SUPPLIED AS STANDARD P AVAILABLE AS AN OPTION PACIFIC 7.0 F10 MkIII Standards | Overview 6.0 Easi On/Off Torch Base Slide the torch body into the torch sleeve. Tighten the sleeve screw to secure the torch in place . Push the boss into the Easi-On-Of base tightly. Fitting Instruction for Torch onto the Helmet. Slide the torch body into the torch sleeve. Tighten the sleeve screw to secure the torch in place . Push the boss into the Easi-On-Of base tightly. Fitting Instruction for Torch onto the Helmet. Slide the torch body into the torch sleeve. Tighten the sleeve screw to secure the torch in place . Push the boss into the Easi-On-Of base tightly. Fitting Instruction for Torch onto the Helmet. Slide the torch body onto the sleeve Tighten the sleeve screw to secure the torch in place Push the boss into the Easi-On-Off base tightly. Operational Instructions for Easi On/Off Torch base Pacifc F10 MkIII Product Submission Notes sales@pacifchelmets.com www.pacifchelmets.com Company|Overview 8.0 EXPERIENCE With over 30 years experience in the design and manufacture of premium safety helmets, Pacifc Helmets (NZ) Ltd specialises in manufacturing and exporting safety helmet products to the exacting design and performance specifcations of each customer. Pacifc strives to meet, where possible set, and exceed the highest possible international standards for technical safety performance. Flexible manufacturing processes and innovative design fair result in products which have created new dimensions in helmet safety. Pacifc has an ongoing commitment to the development of new and innovative safety helmets and related products. EXPERTISE There are three fundamental aspects that drive the design process: International Standards Practical requirements of fre fghters and rescue personnel Aesthetics and comfort Pacifc prides itself on the ability to provide helmets that are designed around all three criteria above. Over three decades, Pacifc has developed an innate understanding of the relevant international standards and the resulting design implications. Pacifc also prides itself on understanding the practical requirements of fre fghters and rescue personnel. Our helmets are certifed to all major international standards, meet specifc user requirements that include comfort, light weight and combine pleasing aesthetics with practicality and safety. The result is a new model of helmet: the F10 MkIII. PACIFIC HELMETS NZ LTD Pacifc F10 MkIII Product Submission Notes sales@pacifchelmets.com www.pacifchelmets.com Contact 8.0 P.O. Box 866, 315 Heads Road Wanganui 4501, New Zealand Phone: +64-6-344 5019 Fax: +64-6-344 5376 Email: sales@pacifichelmets.com Website: www.pacifichelmets.com SAFETY WI THOUT COMPROMI SE DI STRI BUTOR CONTACT DETAI LS PACIFIC