This document provides instructions for making a simple kite using basic materials. The materials needed are butcher cord, tape or glue, a sheet of strong paper, and two straight wooden sticks. The directions explain how to tie the sticks into a cross shape frame and attach the paper sail by gluing the edges. A string is tied around the frame and a tail is added by tying ribbons along the string. Finally, the kite can be decorated.
Original Description:
Original Title
Having a Kite Flying is Interesting and Make It by Self is Easy
This document provides instructions for making a simple kite using basic materials. The materials needed are butcher cord, tape or glue, a sheet of strong paper, and two straight wooden sticks. The directions explain how to tie the sticks into a cross shape frame and attach the paper sail by gluing the edges. A string is tied around the frame and a tail is added by tying ribbons along the string. Finally, the kite can be decorated.
This document provides instructions for making a simple kite using basic materials. The materials needed are butcher cord, tape or glue, a sheet of strong paper, and two straight wooden sticks. The directions explain how to tie the sticks into a cross shape frame and attach the paper sail by gluing the edges. A string is tied around the frame and a tail is added by tying ribbons along the string. Finally, the kite can be decorated.
Having a kite flying is interesting and make it by self is easy.
Prepare the following materials to
make a kite: Butcher cord Scotch tape or glue 1 Sheet of strong paper 2 Strong straight wooden sticks of bamboo !arkers paint or crayons "fter the materials have been prepared the directions bellow is easy instruction on how to make a kite: 1. !ake a cross with the two sticks with the shorter stick placed hori#ontally across the longer stick. 2. $ie the two sticks together with the string in such a way as to make sure that they are at right angles to each other. %. &ut a notch at each end of the sticks. !ake it deep enough for the type of string you are using to fit in to. &ut a piece of string long enough to stretch all around the kite frame. '. (ay the sail material flat and place the stick frame face down on top. &ut around it leaving about 2)%cm for a margin. *old these edges over and glue it down so that the material is tight. +. !ake a tail by tying a small ribbon roughly every 1,cm along the length of string. -. .ecorate your kite with the markers/ Source:www.skratch)pad.com0kites0make.html