This document provides specifications for an inductive sensor with model number BES M18EL-PSH50A-S04G. The sensor has an effective switching distance of 5 mm, is immune to magnetic fields, operates with a DC current, and has a PNP/Normally Open output. It is 65 mm long with an M18 diameter, has an IP67 rating, and can operate in temperatures ranging from -25 to 70 degrees Celsius.
This document provides specifications for an inductive sensor with model number BES M18EL-PSH50A-S04G. The sensor has an effective switching distance of 5 mm, is immune to magnetic fields, operates with a DC current, and has a PNP/Normally Open output. It is 65 mm long with an M18 diameter, has an IP67 rating, and can operate in temperatures ranging from -25 to 70 degrees Celsius.
This document provides specifications for an inductive sensor with model number BES M18EL-PSH50A-S04G. The sensor has an effective switching distance of 5 mm, is immune to magnetic fields, operates with a DC current, and has a PNP/Normally Open output. It is 65 mm long with an M18 diameter, has an IP67 rating, and can operate in temperatures ranging from -25 to 70 degrees Celsius.
Inductive sensor M18x65 mm Factor 1 Factor 1 Magnetic field immune DC, direct current PNP/Normally open (NO) Sn = 5 mm Flush (shielded) Characteristic data Eff. switching distance Sr 5 mm Tolerance Sr 10 % Assured operating distance Sa 4 mm Hysteresis H max. (in % of Sr) 15 % Repeat accur. R max. (% of Sr) 5 % Ambient temperature -25...70 C Temp. drift max. (% of Sr) 10% Switching freq. f max. 600 Hz Ready delay tv max. 30 ms Utilisation category DC 13 Function indicator Yes Power-on indicator No Short-circuit protected Yes Magnetic field immune immune to magnetic DC and AC fields Degree of protection as per IEC 60529 IP67 Protection class II Protected against polarity reversal Yes Protected against reverse connection Yes Electrical data Operating voltage Rated operating voltage Ue DC 24 V Ripple max. (% of Ue) 15 % Voltage drop static max. 2 V Rated insulation voltage Ui 250 AC V Effective operating current Ie 200 mA No-load current Io damped 15 mA No-load current Io undamped 10 mA Off-state current Ir max. 80 A Minimum operating current Im 0 mA Rated short circuit current 100 A Output resistance Ra 33.0k + D Load capacitance max. (at Ue) 1 F Principle of operation Inductive Magnetic field frequency 1000 Hz Magnetic field strength 160 kA/m Mechanical data Housing material Stainless steel Sensing surface material LCP Tightening torque max. 45 Nm Mounting length 50,5 mm Connection type Connector Connector type M12x1-S04 Shock rating Shock, half-sinus, 30 gn, 11ms Vibration rating 55 Hz, 1 mm ampl., 3x30 min Degree of contamination 3 Basic data Basic standard IEC 60947-5-2 Remarks Additional features 1 Factor 1 The sensor is functional again after the overload has been eliminated. With connector, e.g. BKS-S 20- total length = switch length +18 mm. Internet Balluff Germany Balluff USA Balluff China : www.balluff.com : +49 (0) 7158 173-0, 173-370 : 1-800-543-8390 : +86 (0) 21-50 644131 1 (2) Print date: 02.06.2012 Selection date: 02.06.2012 Definitions see main catalog
BES M18EL-PSH50A-S04G Ordering code: BES01R1 Inductive sensor M18x65 mm Factor 1 Factor 1 Magnetic field immune DC, direct current PNP/Normally open (NO) Sn = 5 mm Flush (shielded) Internet Balluff Germany Balluff USA Balluff China : www.balluff.com : +49 (0) 7158 173-0, 173-370 : 1-800-543-8390 : +86 (0) 21-50 644131 2 (2) Print date: 02.06.2012 Selection date: 02.06.2012 subject to change
Approval Standard For Intrinsically Safe Apparatus and Associated Apparatus For Use in Class I, II, and III, Division 1, Hazardous (Classified) Locations